This actually allows disabling a service for the first time, since the
configuration structure for the service is created irrespective of the
enable option.
Change-Id: I08e5e67565d6fe210fb0f65600b8750433ce4712
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10175
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This will hopefully prevent failures on system deploys where DNS is
briefly not available, so git(1) fails to resolve github.com. Thanks
flokli for the tip.
Change-Id: I6096e9f3655cbe28ca2a71142de22337814e0be1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10172
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This removes the wonky hack with detecting the bottom right window,
and gives me saner, unified handling of this display in the tab
bar (of which there is only one!)
Change-Id: Id21c6b2472d0c89fc4d000a10a9e90d2ddba86b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10165
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
While we are at it, rename disk-checkup.nix to btrfs-auto-scrub.nix and
move it into //ops/modules. I originally wanted to have additionally
disk health related services in that module, but the btrfs scrub
functionality is nicely self-contained and reusable, so I think it makes
sense to have this in a more central location.
Change-Id: Iabdd62838eef009540ca71abafd921afda2a9b47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10128
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Network configuration and initrd setup is basically the same as with
edwin, but we are using md for Software RAID this time as well as LVM
over two partitions with LUKS:
- sda2 <-- RAID1 --> sdb2 (boot-raid)
└ boot partition, ext4 (encrypted-container-raid)
- sda3 <-- RAID1 --> sdb3
└ LUKS container
└ Volume Group vgmain
├ Logical Volume vgmain/swap
│ └ swap
└ Logical Volume vgmain/root
└ btrfs
So we no longer rely on btrfs raid1 due to question marks over its
reliability (I personally did not have any problems though). This also
means that we have less LUKS containers we need to unlock when
booting (kind of neglible improvement). The biggest improvement is that
we have redundancy for the swap, so a disk failure shouldn't cause
memory corruption/loss.
Change-Id: I14f065b659857415917d9a60a7ec019e687f8d1c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10127
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
These settings would also be applied to a machine that'd replace edwin,
so it's useful to have them outside edwin's default.nix.
Change-Id: I4e8f464118a103645e53909a87c6ee4446022fa3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10125
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This introduces a new structure, as activities are moved to a separate
AWS Account for reasons (tm).
Change-Id: Ic310eca2dc0d4ee81bae8944238b26910067336a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10124
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This removes everything related to workspaces, as well as the current
RandR configuration, creating a (cleaner) slate for switching to tabs.
This was supposed to be committed earlier, but got broken by
clbot (see b/333).
Change-Id: I2d110bca0d6629a505699210f0aba12882f83d48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10115
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Sets up tab-bar-mode for EXWM, and adds simple initial configuration
and shortcuts to make it behave sanely. I had to assign tab switching
shortcuts myself, as the EXWM input key stuff doesn't work correctly
with the built-in way of setting these shortcuts in tab-bar-mode.
Change-Id: Icd96f03ae7bd2bd5f7c2d59f9aca7a1ca2e7f788
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10116
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Adds an `exwm-assign-workspaces` function that automatically creates
and assigns workspaces to each currently connected monitor. The first
workspace (index 0) is always on the primary monitor.
This function should be idempotent and can be called at any point to
synchronise X outputs and what EXWM is displaying on them.
This works because tabs are disconnected from workspaces completely,
so I don't have to care about what's going on on other workspaces
anymore.
Still missing:
* functions to connect/disconnect outputs
* switching to other outputs from within emacs commands (i.e. without
the mouse)
Change-Id: I7c24aa1b45218fe35de6939e799852b5d11d1272
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This one is a bit stupid because I couldn't figure out a way to
determine the active workspace. It's definitely possible (either
through some XCB calls, or through state management in screen change
hooks), but for now this is fine.
Change-Id: I5e4c531b248caa0021664bad9dc196bef60cfbac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10122
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
By default, this will be the (only) remaining monitor. In N>2
situations, ask the user.
Change-Id: Id68fcf60d56d0414d1072b8ffeef72c608678f52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10121
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Uses a bunch of weird xrandr invocations and completing reads to
configure screens the way I want.
Note that this has a known bug where disconnecting a primary screen
will *not* make one of the remaining screens primary.
Change-Id: Ide5322df446685cc4740d4ddd7b6ca8682375050
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10120
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Something changed in the machinery and broke the overriding. I didn't
notice this, as a I was temporarily using an unpatched EXWM.
Change-Id: I1a4e8ea63bd116d86a430e680c2b631474e9a0fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10047
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Make these keys behave a bit more like the Fn+F* keys on the thinkpad
keyboards.
Seems there's currently no trivial way to get mic mute, keyboard mute
and wifi toggle sent out, but considering the thinkpad usb keyboard is
able to, this should be possible somehow here too - but not today, left
for a followup.
Change-Id: I529a958c78116dd9f7250c938e2e7989b296d6c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10076
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
It seems the regex is not perfect, it choked on a single log line:
```
Nov 13 03:10:19 archeology-ec2 59nkrwmih3ywaxrgxqj79pn395fs6m17-parse-bucket-logs-continuously[11105]: Code: 117. DB::Exception: Line "d57bd890fbd1ae16625bdb8168064125e013198099b7e1b3c24878a4d03c3ab8 nix-cache [12/Nov/2023:09:13:02 +0000] xxx.xx.xxx.xxx - VB7SJVZ108DSSN67 REST.POST.OBJECT index.html "POST /index.html HTTP/1.1" 405 MethodNotAllowed 348 - 4 - "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.95 Safari/537.36" - 0bFdGKbi0n9JHXU1a2hijcJwmYdc6lG2xgbdozc3wS6mlUkBE7ssrQCHIDdOLebo78o2cGbhivY= - ECDHE-RSA-AES128-GCM-SHA256 - nix-cache.s3.amazonaws.com TLSv1.2 - -" doesn't match the regexp.: (in file/uri log/2023-11-12-10-19-50-80805A702ECF65EB): (at row 5)
```
This was due to the user-agent field. The regex is now fixed.
The request itself is fun (someone trying to POST an index.html to the
bucket), and we should probably filter this on the Fastly side already,
not via IAM,
In any case, there's no point failing to parse if a single line doesn't
match the regex - we can just skip them.
For the sake of completeness, logs for that day have been reprocessed
and reuploaded.
Change-Id: Id98a7167a381cda06d150ad5118ee9e70ead277e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10034
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
I no longer work at ReadySet.
Change-Id: Idc19e2d68846551b6cd94f84594712692ebe35a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9976
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: grfn <grfn@gws.fyi>
This packages up my keyboard firmware used for the Keychron K6 Pro.
We add a custom keymap to the `keyboards/keychron/k6_pro/ansi/rgb/
keymaps` directory, a copy from the `default` one (with a modified
`keymap.c`), and then build that as a makefile target.
`via` is *disabled*, as their keybindings take priority over keymap.c.
Luckily, only `qmk` seems to be sufficient to build it.
A simple `:flash` target/script is provided as well, it relies on some
udev rules set in the global system
(`hardware.keyboard.qmk.enable = true`).
Change-Id: I9f7a7a992e13516c32033127f94e37aec62d6b67
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10020
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows using awscli inside a shell.
Clickhouse AWS SSO integration still seems broken unfortunately, even
with https://github.com/ClickHouse/ClickHouse/pull/54347 included in
our bump - it seems it's coming up with another token file path than the
AWS SDK:
> SSOCredentialsProvider: Unable to open token file on path: /home/flokli/.aws/sso/cache/da39a3ee5e6b4b0d3255bfef95601890afd80709.json
This is the sha1sum of the sso_start_url, not the sha1sum of the
session-name (nixos / f2f059b8b7298f1ad52636d67cef8b719aa83bf5).
Change-Id: Ia1bdec03c4f269a7415c42c90c1f4fd3d928f770
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10012
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
This was previously only in my Telegram channel, but it might as well
be on the blog itself.
Change-Id: I301ebeaa4dd1875f3858cee5259a5c689b950790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10009
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This adds a `parse-bucket-logs.{service,timer}`, running once every
night at 3AM UTC, figuring out the last time it was run and parsing
bucket logs for all previous days.
It invokes the `archeology-parse-bucket-logs` script to produce
a .parquet file with the bucket logs in `s3://nix-cache-log/log/` for
that day (inside a temporary directory), then on success uploads the
produced parquet file to
`s3://nix-archeologist/nix-cache-bucket-logs/yyyy-mm-dd.parquet`.
Change-Id: Ia75ca8c43f8074fbaa34537ffdba68350c504e52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10011
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
Clickhouse also has column compression, configurable with the
output_format_parquet_compression_method setting.
It defaults to lz4, and the previous setting got a a zstd-compressed
parquet file with lz4 data.
Set output_format_parquet_compression_method to zstd instead, and sort
by timestamp before assembling the parquet file.
The existing files were updated to the same format with the following query:
```
SELECT * FROM file('bucket_logs_2023-11-11*.pq', 'Parquet', 'auto') ORDER BY timestamp ASC INTO OUTFILE 'bucket_logs_2023-11-11.parquet' SETTINGS output_format_parquet_compression_method = 'zstd'
```
Change-Id: Id63b14c82e7bf4b9907a500528b569a51e277751
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10008
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This adds a `archeology-parse-bucket-logs` CLI tool to `$PATH`.
It can be invoked like this:
```
archeology-parse-bucket-logs http://nix-cache-log.s3.amazonaws.com/log/2023-11-10-00-* bucket_logs_2023-11-10-00.pq.zstd
````
… and will produce a zstd-compressed Parquet file for (roughly) that
time range.
As the EC2 instance credentials don't give access to the logs bucket
(yet), other AWS credentials need to be provided.
This can be accomplished by using "AWS_ACCESS_KEY_ID",
"AWS_SECRET_ACCESS_KEY", "AWS_SESSION_TOKEN" from
"Option 2: Manually add a profile to your AWS credentials file (Short-
term credentials)" in AWS IAM Identity Center.
Processing logs for a one-hour range takes a minute or two, the
resulting zstd-compressed Parquet file is around 40-80M in size.
Processing logs for a whole day takes some 25mins, due to the sheer
amount of data (12 GB of raw log data, distributed among 450k individual
files, 20Mio log lines), but at least clickhouse isn't able to parse the
resulting parquet file back in:
> Code: 36. DB::Exception: IOError: Couldn't deserialize thrift: MaxMessageSize reached
For future automation tasks, it's probably better to run this once an
hour, and further join the data later on.
Change-Id: I6c8108c0ec17dc8d4e2dbe923175553325210a5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10007
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Rather than picking up from clickhouse-specific config files, this gets
it to pick up from the ambient environment, which is closer to (but not
the same as) the AWS default credentials chain.
Change-Id: I9c498c231974ed345c3e3d354ec230052b4d0ff2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10006
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This behaviour might change (or not), see https://github.com/ClickHouse/
ClickHouse/pull/42003, but as of now, a `--progress` will provide some
progress.
Change-Id: I4891b6e2f96f2656858e71f88a226d24f0d45dc3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10005
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
First pass at an xdotool-based command to edit the current text input in
emacs
Change-Id: I1e04612478292fe83083d197d481e034a9fce97f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9971
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This can apparently work around some of the CPU throttling bugs on
~modern~ computers.
Change-Id: I807ece85d3eba53857a1cb1e73a33f7924538e96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9895
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Expose `deps` separately, add a direnv with PATH_add for it to bring
tooling into $PATH.
Change-Id: I432cd2b082cad89e08bef78dc4653e10e137cd6b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9842
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Avoid having to re-enter the shell whenever the config is changed.
Change-Id: Ib9f6bb4075e29acaeb4863d64c017695ca85b60b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9841
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This add the EC2 box config to the repo.
Change-Id: Id7a888a2cfbf1454cd9f9465018df377e14b4e9f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9836
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This adds a deploy-archeology script.
I tried getting morph to work first, but passing it a
depot.ops.nixos.nixosFor seems to be very hard - the NixOS module system
doesn't like the arguments it's called with.
Replace morph with a 3 line bash script, which assumes your ssh_config
contains config for an `archeology` host.
Change-Id: I2bf694c60ded39c201efbbb899f3b5512aa4d0f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9835
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
And of course I managed to move the cache creation into the handlers,
instead of doing it before starting the webserver.
And now I managed to create a hopeless mess of callbacks, but oh well.
Change-Id: I73c3aeced71923c7372496286a279e326b20c388
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9813
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
I’ve been wanting to experiment with this stuff for a while,
abstracting away a handler type.
The existentials for parser and body took a bit of mucking about, but
in the end hiding the variable behind a `Body` constructor did the
trick.
Now every handler has its own cache, which means we can start caching
arbitrary results.
Change-Id: If57230c47f97ef4c548683f2c2f27660817a31f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9812
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Now this is getting cool. After 5 minutes we will ask the backend
again (which takes like 3 seconds), but then we compare the old cached
result with the new result and only send it back to the client iff it
changed.
So the client will still have to wait for the roundtrip time, but
doesn’t have to pay for the content. Plus, it gets some info that
upstream hasn’t been updated.
Change-Id: I6dba40321949da5da6a16b2e799d939573c77ba7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9811
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This is a dumb experiment to see how hard it is to respect cache
headers; turns out, medium hard but doable.
Sets the correct expiry time according to the cache, plus respects
`If-Modified-Since` which is a tiny bit harder.
Change-Id: I9e6166af0fa254df2beb0f3919187b91a407487b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9810
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Okay, so I guess you also have to seq the cache and everything in
between the IORef and the data.
Change-Id: I4c79c99afbd09e83e9d7a01d58b31b36862e4d11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9807
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Otherwise the table might potentially hold onto data from the website
request, it’s hard to say.
Change-Id: I786478bd1ce2d9775b3d0b57565d79666ef8a96f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9806
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Back at my bullshit.
Mostly copied the setup from whatcd-resolver.
Change-Id: I9edd4387ee73c18816b1692d5338735536cce70f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9803
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
We can cross-reference all of these to schema.org, it should work for
most of the fields.
Change-Id: I38d8dbc7e964764886ddd156c4148bcf3ee376f3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9744
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Ideally we can figure out how to search for single songs by grepping
through musicbrainz. For this we kinda need the jsonld results, so
this is a first step which visualizes the structure and makes it
easy-ish to lazily traverse it.
Change-Id: Ieca21674dee8e8c2dacbab4f2f15ccbe067da647
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9743
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
We want to use this quite generic parser type for other things as
well.
Change-Id: I890b43c58e479bdf2d179a724280ef1d8748fafa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9742
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
nixpkgs changed something in how it deals with configuration of the
package set itself when that is externally instantiated (like in
depot)
It seems like we can work around this mostly by just ... deleting some
code, as all instances of this were for allowing unfree code, which
we've already set on the top-level anyways.
* //users/sterni: fix nixpkgs config assertion to point at
pkgs.config
* //users/wpcarro: disable locate service, which is broken in nixpkgs
Change-Id: Iacf6f1c8fd5b5289e7265e155d74f8269a858ceb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9541
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Without this line, accessing external APIs from Gonic (e.g. scrobbling
to Listenbrainz) does not work (unless a local resolver exists). This
is because in the pure Go DNS implementation used in gonic, only
/etc/resolv.conf can provide resolvers.
Change-Id: I26dd9a845b0a70c4cfb983c68da2b76b7e57dfec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9502
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* zramSwap: during reindexing, geesefs can be pushed to the boundaries
of what the new overaggressive OOM killer accepts, and I don't want
to bother configuring that thing instead.
* umount: geesefs dying unexpectedly leaves broken mounts around,
clean these up before proceeding
This bakes in the assumption that there's only ever one geesefs
service, but that assumption is baked in anyways.
Change-Id: Id85c2f5bc2312a7246ea20229eb36d2cc1bd82c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9500
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... this will make sense soon!
Change-Id: I1f8f32d655afdf868fff4bd09e1fea2943fd7558
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9496
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Can't be bothered to make something more automated for now.
Change-Id: Ie245af90c1a62a5988b97d16f86b6567e1ffafd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9493
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Experiment of how to instrument a lib I’m using to trace instead of
log.
Now that we added MonadTracer to Transaction, we can drop the unlifted `inSpanT`.
Change-Id: Iea891a58cfb33a0837978611456c33aefcccf0d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9491
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
For it to work, you need otel (e.g. jaeger) to run on port 4317.
Change-Id: I36f0493b9be26af256769ae5af8916029036a76e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9488
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
This is horrible, but I don’t think there’s a more pragmatic way to
set this up right now.
Change-Id: I166550292b4eb979864f7d69ea56a2827bbf21bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9487
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Instead of inserting torrents and every tour group seperately, insert
the tour groups and then the torrents in one go (unzipped).
I finally found a good use for list comprehensions, flattening nested
lists.
Change-Id: I7dfc765ad058dff3afb3b03887141b334a4b1988
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9486
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Still n+1, but now we got the IO where we want it to make the database
inserts efficient.
Change-Id: I2ee36ea41bf186cbeb5581b0df802bb3611769fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9485
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Now we can move the I/O into a where block.
Change-Id: Ib5334948f3d11ca120ce0b7a46c67f8500fdab3a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9484
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Returning an I/O action was a good first approximation, but leads to a
n+1 query problem, making the whole shebang pretty slow after doing a
search.
Thus we need to split data & I/O, so we can be more clever in the next
commit.
Change-Id: Ieb2f8d5445f1258047da9b121b977c0b8d2dd7f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9483
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Telega tries to use some random completing-read functions, but I just
want it to use the default one, which I've configured the way I want.
Change-Id: I33da24f257e8ac0cae4a7d25ba6c5e4e656fcad5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9478
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
This is unmaintained and has been removed from nixpkgs. As an
alternative, 'eza' can be installed.
This is the last instance of 'exa' in depot, so the workaround from
the channel bump has been removed.
Change-Id: Id915260b6c969a6b2a8ecae49d3ce92285f09f71
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9330
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
* run on port 9092 (transmission runs on 9091)
* run postgres on port 5431 instead of 5432 (to not interfere)
* only search for albums for now
* correctly handle missing torrent file in SELECT
Change-Id: I20125f7731c9b80a9e8ea05b726adfb1244a24bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9335
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
If more than one page is returned by the search, query all of them.
Also add an ON CONFLICT clause in case the torrent group already
exists, to update it.
This function is getting a bit unwieldy (plus it suffers from an n+1
problem), but ok.
Change-Id: Ib505a2be8286d658ae44a3fe124a4fb42d0fc0c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9334
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Some of these I don't use, some of these have been replaced with
tree-sitter, some of these have moved into core.
Change-Id: Id0a8aac4189607a89db861bbc09b95c75c45dc0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9310
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The mechanism in nixpkgs does not work, but doing it myself is not
that difficult.
Change-Id: I91b12e9c1f5d381c9990fd46e02169f5275f88da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9309
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially interested in the C++ mode, as I am regularly dealing with
extremely large C++ files where the existing mode is having trouble.
Change-Id: I8c17a35011a23b67043de5de58c4269c636de68b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9308
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I want to experiment with the new tree-sitter modes in Emacs, maybe
they're good.
Change-Id: I706fc8a889fcfa61d0f11d50ecbc67a2899b5bbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9307
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Also expose both formats, then use it from
users/tazjin/presentations/tvix-eval-2023.
Change-Id: Id906e8aff5510a7a4f33336326472e86db18ea32
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9280
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Makes it possible for people in the audience to get to the link
collection reasonably quickly.
Later on that post can also have the talk itself added. For now it is
unlisted.
Change-Id: If9ae1d88d3c6f22bbd70b2b3cbea0b0d42895a93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9208
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Tested-by: BuildkiteCI
This demonstrates a Rust stdlib call that just causes runtime panics
on WASM, for explaining the problems with porting Tvixbolt.
Change-Id: Ief974f1bba509fdac4b9bc9f862ee8f4dfc5158e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9206
Tested-by: BuildkiteCI
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Autosubmit: tazjin <tazjin@tvl.su>
refine doesn't work anymore, inspector seems to be a more modern
alternative.
it's impressive that they managed to write elisp code that broke.
Change-Id: I672de68abdc3d780f66769043afefd8d37438548
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9209
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I spent way too much time fighting LaTeX to do roughly what I want
here again, but all the alternatives are even worse.
Change-Id: Ibe12a4ce175ceb73e9d6e276613dcd4827dd76c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9150
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Tested-by: BuildkiteCI
We don’t strictly need servant-multipart, if all we need is to parse
some multipart forms. This removes some deps.
Change-Id: I218731fada056b9edfb3d01fc33880673d14473e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9187
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This gives me the ability to override the Emacs per-machine easily.
Change-Id: Id480889c108833b0a11c377a9b1e946900c5aba1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9166
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I only wrote this as a hack to make my Emacs config run on gLinux, but
that isn't relevant anymore.
Change-Id: I19c49d500e0ec75bb85644d25a63b0b6c530aa62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9165
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of staying up-to-date with Emacs master, I'd like to be a bit
more laid back and stay with stable releases. Now that native
compilation is in this is not a big difference.
I tried to use `-pgtk`, but it broke EXWM.
Change-Id: I0789a1f73d0149bda912987e726de396545abce1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9164
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of producing a binary that gets called by Emacs, with
input/output serialisation, use a dynamic Emacs module that lets Emacs
more-or-less directly call the relevant GTK functions.
I'm doing this mostly as an experiment. Might be interesting to end up
with a dynamic module that I can dump some experimental code into that
improves my workflows.
To do this, I've exposed the emacs binary used by my Emacs
configuration in an additional `passthru` field. This ensures that the
module is linked against the right version of Emacs.
Change-Id: I1426994fe3455ed1b2a685c5a09705e29fa40950
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9163
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
This built-in emacs library actually provides a data structure that
can work as an LRU list through the existing helper function to move
an element to the front of the ring if it already exists.
As a result, the code for workspace history moving becomes a lot less
brittle and complicated than it was before. No more carefully figuring
out when to modify state, just push it in the ring unless it's being
rotated already.
Change-Id: If354e0618fc5a6d7333776468eec077596cfe9df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9162
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I haven't used that since ... 2018 or so, time for it to go.
Change-Id: I5e1b729bd553940b98335e3d9c7ca5b134fdf692
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9161
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This does nothing other than dump out the list of XDG apps to stdout
in JSON format. There are no options or anything.
This can be used for selection in app launchers (e.g. dmenu, something
based on completing-read in emacs, rofi, etc.).
I wrote this because I don't want to deal with having to do this in
Elisp. It's also unclear what logic actually hides behind under the
hood here, so why not just use the official library.
Change-Id: I16fed2c92760cadecc02c59a4e537a1fa247aff9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9157
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
vertico and consult are more modern versions of interactive narrowing
helpers, as those implemented by ivy and its related packages.
The primary differences (and what I care about here) is that they are
more focused on integration with the core Emacs primitives, rather
than building an ecosystem around them.
For example:
* vertico enhances `completing-read' and friends, but does not attempt
to provide its own ecosystem of functions to *trigger* completions.
* vertico integrates with the default `completion-style' system,
meaning that I can continue to use things like prescient without
extra packages that integrate it with vertico
* consult does not rely on vertico or any other specific completion
framework (such as counsel/swiper do with ivy), and simply
implements its functions using completing-read
This reduces the overall amount of code in the dependency closure and
leads to a less special setup.
Functionality is basically equivalent, except for two things which
counsel came with that I will need to substitute:
* counsel-notmuch (actually this was a separate package, but I didn't
use it much anyways, so just ignoring it for now)
* counsel-linux-app (opening desktop shortcuts, this I will need to make)
As a side note, consult notes "This package is a part of GNU Emacs",
but it doesn't seem to be the case.
Change-Id: Ia046b763bf3d401b505e0f6393cfe1ccd6f41293
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9155
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
When entering an incorrect GPG key password, I don't want my whole
buffer layout ruined. A small error message in the modeline is enough.
Change-Id: I7318d685e74fa4e110a9bff30d0de9f7f18b2be4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9149
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially the recursive minibuffers only cause a mess.
Change-Id: I6f7f790acd6a2f8cc4cec26c9cf97d5e53e77106
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9148
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Adds a completing-read function (defaulting to ivy for me, but it
doesn't matter) that offers a reliable alternative to standard
buffer-switching implementations.
In particular, this implementation retains a mapping of
buffer names to their buffer *objects*, so that the correct buffer is
selected even if some renaming took place during the selection.
I tried to account for a bunch of the common behaviours I could think
of:
* invisible buffers are ... invisible
* entering a buffer name manually creates that buffer, if there is no
match
* ... unless that buffer is an invisible buffer, in which case it is
selected and switched to
* the first element is always `(other-buffer (current-buffer))`,
because of the ordering of #'buffer-list
Yet, the entire code of my implementation is less than the *setup*
code of ivy-switch-buffers, so it's possible I missed something. Well,
I'll find out ...
Change-Id: I08be0da0863d06c9a930e5efaf916719655db90e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9147
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This mirrors the terminology Haskell uses: quot and rem truncate towards
zero which is also the case for builtins.div. We can give us the option
to introduce Haskell-style int.div and int.mod (to complete the
confusion) which would truncate towards negative infinity.
Change-Id: Ibebb0a01a73c9718cd62121b2fc2a19c3a4be0de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9009
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Only implements the different conversion types from and to ints for now.
Unfortunately very reliant on builtins.{floor,ceil} which can't be
implemented purely except very inefficiently (to my knowledge), so it
only really works for C++ Nix >= 2.4. Tests are thus skipped for
C++ Nix 2.3.
Change-Id: Idcb1a11df11e214cdba3f2a0715472b370daa7dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9008
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
We omit type checks for performance reasons in most places currently, so
the library grouping is important in showing people what to use for what
sort of input. The moved functions make sense to use with floats as
well, so we'll move them to the num library. Some of the remaining
functions could theoretically be adapted and moved, but aren't for now.
Change-Id: Ifdecaa60be594f4438b2a58b9ea6445e2da080e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9007
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This means we can subtitute the base package for my emacs derivation
instead of compiling it from scratch (which is quite slow).
This means I'll be using 29.1-rc1 until
https://github.com/NixOS/nixpkgs/pull/246203 or
https://github.com/NixOS/nixpkgs/pull/247496 are merged which is okay,
as it includes pgtk support.
Change-Id: Ie7cfec1ca0df9974c049be0b00d75f32143ac905
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9065
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
* //users/grfn: vendor ddclient module and package into depot
//3p/ddclient now contains the removed package expression and
NixOS module with the following changes:
- Include former uid/gid settings from ids.nix which have been removed
by upstream with the ddclient module.
- Rename to deprecate-ddclient, since it is impossible at the moment
to prevent the corresponding mkRemovedOptionModule from being
imported (https://github.com/NixOS/nixpkgs/issues/245265).
I wrote a patch for nixpkgs that would at least allow individual
mkRemovedOptionModule to be disable, but it is stuck for now:
https://github.com/NixOS/nixpkgs/pull/245274.
* //tools/magrathea:
We need to pass -host to csc due to
https://github.com/NixOS/nixpkgs/pull/246923 now. I don't fully grasp
what this means, but it works and we are hardly cross-compiling, so it
should be fine until I can get some answers from the change author.
* //3p/nixpkgs:nixos-option: provide latest Nix as input
https://github.com/NixOS/nixpkgs/pull/237442 adapted nixos-option to
API changes in Nix's libraries which means it needs to be built
against Nix 2.15, not 2.3. Let's hope it stays up to date with the
latest Nix version in the future, so we can keep this override as is.
Sadly this means that machines in depot will depend on two
versions of Nix going forward.
* //3p/nixpkgs:tdlib: update to match emacs-overlay
Change-Id: Iac4dba58a076ecf25e8647fd9a06cbabf2f7809e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9004
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This allows pinning the name of the sparse tree derivation, which
stops the continous rebuilding of tvix-store-proto dependents.
I've opted to let the function take an attribute set instead and
refactored the call sites appropriately.
Change-Id: I3e57785094b1adbfffa24caf9f1c3384844fa200
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8965
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The `a` shortcut of telega makes it dangerously easy to accidentally
add users whose username starts with `a` to a group.
This unbinds the shortcut, and leaves the member-adding function to be
called manually and explicitly only.
Change-Id: Iedb6291f16a299fc5d4ef824a1be6eb0a449001f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9015
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Usually remasters just … sound better. Thus let’s give them a boost in
the selection score. In case they are horrible they should have
significantly less people seeding them and less snatches than their
originals anyway (maybe the multiplier should be 1.5 or 2 instead?)
Change-Id: I6817091f42b7bcb75eaf57a6aa635b5ba468f99e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9014
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Work projects are not in git, but I still want to fuzzy jump to them.
Change-Id: Iced78519da69b6992d253e2a0c9ed485f1347164
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9005
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Gonna try to use this not for what it's intended ))
Change-Id: I669422323197cd4dc3812af399f17ed429871108
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9002
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I keep setting this manually to launch Java applications, might as
well just set it system-wide.
Change-Id: I3a3477cd4364b4c170b98320e2cab1359dd399fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8982
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I want to use these in multiple projects.
Change-Id: I5dfdad8614bc5835e59df06f724de78acae78d42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8971
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
It does the emoji completion, very important!
Change-Id: I1160e2cf0415b2a4e2b6ebc194cd643a2b18793e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8966
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
A streaming webserver which serves directories as .zip recursively.
Because everything sucks and this is the best way to get dirs
delivered to people.
Change-Id: I451885cfc5082db12ac32eb0a4bfb04bc983d3c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8953
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Forgot this example when I changed the spec to ignore earlier
duplicated fields.
Change-Id: I9bc8d3e27201afd0d256aa4771b6420059fc68a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8949
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
I feel like I’m slowly but steadily coding myself into a corner here,
have to rething the whole state thing.
Anyway, now the refresh will display roughly the same information as
the interactive one, which is *a* first step I guess.
Change-Id: I8820c2e321e6e8c9eba0f2f1cc70ce07a044621c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8906
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This is a bit dirty, ideally we have a single polling loop that uses
`hx-swap-oob` to fill all status fields in the table (to avoid O(n)
looping requests).
Change-Id: I78ab392964cf00e39424002fe48cb35a60af184a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8875
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
When looking up stuff on the tracker, cache the results in our
database and display the best torrent matches in a simple web UI.
Change-Id: Iba8417fbdd3ea812765ab0289a1d5b03b7c2be81
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8857
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This is intended to convert the XML dump from
https://jbovlaste.lojban.org/ to an sqlite database at one point.
So far only XML parsing and some pretty printing
Change-Id: I48c989a3109c8d513c812703fa7a8f2689a157ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8687
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
I’m playing around with htmx (server-side html snippet rendering),
this is a simple registration form and some form validation that
happens in-place.
Change-Id: I29602a7881e66c3e4d1cc0ba8027f98e0bd3461c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8660
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
We upstreamed some of these modules to hackage, so I can get rid of it
here.
Change-Id: I70e1e864a81029cadbbd96cc019a768728431cff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8659
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
in accordnace with similar renaming on other sites
(e.g. GitHub, Exozyme, chaos.social)
My experience with exozyme tells me that fully applying
this change might require manual editing of gerrits database
anyways to fix broken references/patch ownerships.
Change-Id: I024ff264c09b25d8f854c489d93458d1fce7e9f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8919
Autosubmit: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: zseri <zseri.devel@ytrizja.de>
This stops it from shadowing org-mode's C-c ! which I wanted to use a
few times, curiously. Surprisingly, this seems to work correctly even
though no special evil binding facilities are involved, i.e. the keys
only work in normal mode.
Change-Id: I184321c1f1b02d1661dc915bb3a384a349a04068
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8928
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
the ecdsa-cert key is not welcomed by many ssh setups ...
Change-Id: Ic1bc583105226324a9c3ff26924eb2faa38f10fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8912
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
The images displayed by telega are usually not displaying correctly,
this is fixed by simply .. not rendering them, and letting emacs do it
through an emoji-supporting font (which I do have installed).
Change-Id: I429ff2865c60633329437687c1c09a1aaf8ae29d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8884
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* //3p/sources: switch stable channel from 21.11 (!) to 23.05
* //users: adapt to emacsUnstable to emacs-unstable rename
* //users/grfn: use default Linux kernel version everywhere,
as 5.15 has broken in this version of nixos-unstable.
* //3p/cgit: adapt to git 2.41.0
The committed changes are the same as the [patch1] I've submitted
to cgit-pink which is in turn based on Christian Hesse's [patch2].
patch1: https://causal.agency/list/thread/20230624144033.802270-1-sternenseemann%40systemli.org.html#20230624144033.802270-2-sternenseemann@systemli.org>
patch2: https://lists.zx2c4.com/pipermail/cgit/2023-June/004843.html
Co-authored-by: Christian Hesse <mail@eworm.de>
Change-Id: I549a62e7c85c66d772edda997819a40f2d5835d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8855
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: grfn <grfn@gws.fyi>
This isn't necessary (it's all public!) and actually currently breaks
pulling from our public ECR repo
Change-Id: I32f0b92f5ca352f57a26d0e6c10ebf323aa006df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8865
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
The issue this was working around has long since been fixed, and having
this disabled was preventing the service from working
Change-Id: I9b69f947b8952df786193f8784d0f5cc6b898440
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8862
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: grfn <grfn@gws.fyi>
This runs a headscale server on sanduny which lets users join their
machines to the TVL tailscale network.
This would theoretically let people communicate with each other on the
internal network, but also more notably joined servers can advertise
exit node capability so that we can have our own "VPN network", for
starters with endpoints in Germany, UK and Russia (whitby, sanduny and
koptevo respectively).
This setup isn't fully stable yet, notably:
* The IP range used by tailscale is just the default one right now,
I'm not sure if that should be changed or what.
* The system is stateful (on sanduny), but the state is not (yet)
backed up anywhere. Use with caution.
* Machine joining is a manual process requiring SSH & root access to
sanduny.
The process is to log in to sanduny, then get a headscale shell with
`sudo -u headscale bash`, and to use the `headscale` CLI within
there to administrate access.
I've opted to create a user account `tvl` for TVL-owned machines,
and a personal account for myself and my machines.
Change-Id: I4f1be1fe8062a6c2e77203ff72fe8709f4e4dec8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8837
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This machine is now being decomissioned.
Change-Id: Ib7f016c7de84dab2cdf3c071445cf830d2eccf5f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8838
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The main instance is still running on polyanka, but things are moving
in this direction.
Change-Id: Idfa9e508023c05148003ac4621ae01dceb284c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8827
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The GPT backend is cool, but it's also very slow, prone to request
errors and quite expensive.
This switches to Yandex Translate instead which for all posts that I
tested seems to be totally fine.
Change-Id: I5217113995b701508a83e7782eb1325957996719
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8826
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The entry list is now much more condensed. It's maybe a little *too*
condensed, but already closer to what I'm looking for.
Note: A new "note" post type has snuck in and can now be used for
random musings or comments on previous entries. Notes do not show up
in the Atom feed.
Change-Id: I920c0c7650937474b8a5f30cba78416554d523ce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8806
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is the "new polyanka" (eventually), as I'm decommissioning that
host slowly.
Change-Id: Ia0fe664f3bf64513d8177434c6c0fface857cd99
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8783
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
* //ops/modules/depot-inbox: Adapt to upstream option type declaration.
See nixpkgs commit b6ed3b8f402893df91a8e21ce993520301c2f076.
* //ops/machines/sanduny, //users/tazjin/polyanka:
Remove boot.loader.grub.version options (no longer has any effect).
* //users/sterni/emacs: reflect rename emacsPgtk -> emacs-pgtk
* //3p/overlays: update tdlib to match emacs-overlay
* //3p/overlays: give EXWM from depot a separate name
* //users/grfn/system/home: disable Slack support in ntfy
Change-Id: I03bde088bc70e05b23925f244899807210cb7b20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8547
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I don't actually use this, and it might be responsible for some EXWM
bugs in the latest version.
Change-Id: I8817e0cdd9d1b68ed6a9bdd072616f63f9f20d21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8758
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
reddit is dying now, but the response there was actually quite
interesting, so I'm keeping an archive link to it around.
Change-Id: I419276428ce141fc526124d9746e3ab13df4bbc8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8756
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
A recent upgrade is requiring this now for some reason.
Change-Id: I5908c12d104044897b4969dbd1299a3071d507bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8716
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: grfn <grfn@gws.fyi>
/**/ is a nice way to align if statements which doesn't work with
nixpkgs-fmt, since it'll reflow the comment to the line preceding the
if. Consequently, we can delete these comments now.
Change-Id: Ifa5327f846a903e07607b21f8eedbc32fc36f758
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8689
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
* 3p/buzz: delete package
This is unused, old, and uses an insecure version of OpenSSL which
broke eval.
* 3p/overlays: remove nvd patch
Newer versions of nvd are compatible with Nix 2.3 by default.
* users/grfn/system/home: remove explicit rust-analyser package
This conflicts with `rustup`, causing eval failures, as the wrapper
seems to now be included in `rustup` by default.
* users/grfn/system: temporarily disable ISO builds
They were broken upstream in nixpkgs by a change to stdenv/setup.sh,
being fixed in https://github.com/NixOS/nixpkgs/pull/234883
Change-Id: I0eea99ec98f4e73e615c012ffae1d0e37122e73b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8585
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
this is slow and often overloaded, but it's kind of cool when it
works. this translation method deals much better with the kind of
slang you'd see in telegram posts than any other method.
Change-Id: I7e4c845eb382f0eac627c4237b492c8e40dae574
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8625
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Eventually, we'll want to replace dump-stream-binary with something more
efficient—given that we have flexi-streams we can use something that
only does matching element types no problem. REDIRECT-STREAM is much
more efficient thanks to using an internal buffer.
streams.lisp gets a new section at the beginning for grouping utilities
that don't have any real (internal) dependencies.
Change-Id: I141cd36440d532131f389be2768fdaa54e7c7218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8583
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Porting over the rest of the decoding (RFC2047) and especially encoding
over to qbase64 is still pending, as it is a little trickier.
Change-Id: Id4740eb074a387aeea2cb94b781e204248530799
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8582
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The input adapter streams were input streams yielding either binary or
character data that could be constructed from a variable data source.
The stream would take care not to destroy the underlying data
source (i.e. not close it if it was a stream), so similar to with
FILE-PORTIONs, but simpler.
Unfortunately, the implementation was quite inefficient: They are
ultimately defined in terms of a function that retrieves the next
character in the source. This only allows for an implementation of
READ-CHAR (and READ-BYTE). Thanks to cl/8559, READ-SEQUENCE can be used
on e.g. FILE-PORTION, but this was still negated by a input adapter
based on one—then, READ-SEQUENCE would need to fall back on READ-CHAR or
READ-BYTE again.
Luckily, we can replace BINARY-INPUT-ADAPTER-STREAM and
CHARACTER-INPUT-ADAPTER-STREAM with a much simpler abstraction: Instead
of extra stream classes, we have a function, MAKE-INPUT-ADAPTER, which
returns an appropriate instance of FLEXI-STREAM based on a given source.
This way, the need for a distinction between binary and character input
adapter is eliminated, since FLEXI-STREAMS supports both binary and
character reads (external format is not yet handled, though).
Consequently, the :binary keyword argument to MIME-BODY-STREAM can be
dropped.
flexi-streams provides stream classes for everything except a stream
that doesn't close the underlying one. Since we have already implemented
this in POSITIONED-FLEXI-INPUT-STREAM, we can split this functionality
into a new superclass ADAPTER-FLEXI-INPUT-STREAM.
This change also allows addressing the performance regression
encountered in cl/8559: It seems that flexi-streams performs worse when
we are reading byte by byte or char by char. (After this change mblog is
still two times slower than on r/6150.) By eliminating the adapter
streams, we can start utilizing READ-SEQUENCE via decoding code that
supports it (i.e. qbase64) and bring performance on par with r/6150
again. Surely there are also ways to gain back even more performance
which has to be determined using profiling. Buffering more aggressively
seems like a sure bet, though.
Switching to flexi-streams still seems like a no-brainer, as it allows
us to drop a lot of code that was quite hacky (e.g. DELIMITED-INPUT-
STREAM) and implements en/decoding handling we did not support before,
but would need for improved correctness.
Change-Id: Ie2d1f4e42b47512a5660a1ccc0deeec2bff9788d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8581
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
this is for a... party
Change-Id: Ida5e0effb071ac39194cabec507eef58de2bf279
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8506
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
This is a little late, but whatever
Change-Id: I06a28c2c81f1653576a15d3aec2658d356d219d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8505
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: grfn <grfn@gws.fyi>
Something in recent nixpkgs made things a little ... less bold. This
makes them more bold again. It looks vaguely correct after.
Change-Id: I6fc60cc1ec2d21d193f46f4d80998f041941add0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8488
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Tailscale just works better out of the box than Zerotier, and its
clients aren't unfree.
Change-Id: Ie35ef1adde0edbe923992b02e6b636269a96a81e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8482
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
some telegram channels do not allow embedding of messages, but do
allow a preview to be shown on twitter. this preview is just embedded
in the html, and can be scraped out if no message was found.
technically this preview also contains image links, but they are to
very low resolution, thumbnail-style images so i decided not to
include them here.
Change-Id: Ifb89f9fbde8140d577a5ee3af6e60b04232e53e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8480
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
we don't need these and they add a bunch of unnecessary deps.
Change-Id: I88a30ec8443090a2c61934b35848bea6f1d9597a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8479
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Add a cabal file and move into subdir.
Use MyPrelude & fix a few linter warnings.
Change-Id: I19d5ba47be789fc24f8e02ee8721f73c706ae3e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8465
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
* Satisfy new assert that the corresponding shell needs to be enabled
via programs.* if it is as the login shell of at least one user.
* //users/tazjin: “Address” removal of hardware.video.hidpi option.
* //3p/gerrit: update fetch sha256
Change-Id: Id0988a0ea7f393d6b7848a7104fc3526ee1177f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8407
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* //users/wpcarro/avaSystem: disable hidpi
Recent changes have made nixpkgs adopt the position that hidpi
optimization can't be done generically and at the very least needs to
know a specific DPI number to optimize for. In addition to knowledge
of the display(s) in question (i.e. wpcarro needs to do this) the
issue <https://github.com/NixOS/nixpkgs/issues/222805> can give
guidance as to how to restore the desired hidpi look and feel.
Change-Id: Ia4b079a06dcb710050619f350cd0655216b4a42f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8345
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Starting with 1.18.1 we no longer need to pass an extra flag to work
around the log4j CVE, so baseJvmOpts can be empty.
Change-Id: I6d6c5a366ecbb499b2e3945db81ca0a8b2e2dcbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8332
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
One normal chromium is enough. google-chrome is not needed because
Chromecasts usually don't work anymore anyways.
Change-Id: I48bed05c56bd6f450be393cf727930eaad5cd6b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8231
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
* //3p/sources: temporarily switch to nixos-unstable-small, since it
includes:
- evans update we are interested in, allowing us to drop our evans
patches.
- awscli2 update that unbreaks //users/grfn
* //3p/overlays/tvl:
- drop evans patches
- update tdlib to 1.8.11 to make tazjin's emacs happy
- drop obsolete mullvad workaround
* //users/grfn/keyboard: disable -Werror for array-bounds warnings.
Seems like a non-trivial job to resolve the warning properly,
hopefully GCC 12 still generates the same working code as GCC 11 used
to.
* //users/grfn/system/home: remove yubikey-manager-qt.
Yubico can't seem to keep that on pace with yubikey-manager. It
requires a <5 version of the latter which is incompatible with the
recently released cryptography >= 39.
* //3p/gerrit: update changed FOD hash for the fetch step
Change-Id: I590ab996247e69b0ab5059cd173840ef4ebfe939
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8133
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
I didn’t ever get aerc to work, so let’s get rid of this.
Change-Id: Ie59b23fe7d5af70ca82c1c624c1e11d21da735f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8189
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Includes a frontend bug fix and a closure size reduction of the server
application.
Change-Id: I5713a5348281acb7126c1fd85a637a6fff969c98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8187
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is an experiment for tvix-eval.
Change-Id: Ic752b5b125cefefeb1343e38a70beb364478e6eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8131
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This also removes the globally available `data.data.transactions`.
Change-Id: I674a772ac91f01ff8c2d211157bd567391ab1765
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7913
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Hacked this together during my week-off while I was in Telluride, CO. The git
history is quite sloppy; so is some of the code. But it (mostly) works as a
demo, and that was the point.
Change-Id: Icfbc277090b69a802c00becdbd162652e4e8e156
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7904
Reviewed-by: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Autosubmit: wpcarro <wpcarro@gmail.com>
I'm considering rearchitecting the parser to align with the "Crafting
Interpreters" wisdom. I don't really want to do that right now, and the current
implementation fits my use-case. If I discover bugs or want to add more
features, I'll revisit the issue.
Change-Id: Ia767933519ea9fc0fe954cb142f21b02e13a1f40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7883
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: wpcarro <wpcarro@gmail.com>
I was (and still ~am) a bit leery of supporting this (scope creep?), but I need
it in two of my personal projects all within the first O(days) of using this. So
I'm thinking that if this tool is going to be a workhorse, I'll need to
sacrifice some purity for practicality. Future me will find out the real
answer...
Change-Id: Ia71a8cf6627062440476b638d2c194c2c9ac97c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7878
Autosubmit: wpcarro <wpcarro@gmail.com>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Google Cloud Run uses images to define services, so:
```shell
$ mg build :image
$ docker load <./result
$ docker tag website:latest gcr.io/wpcarros-infrastructure/website:latest
$ docker push gcr.io/wpcarros-infrastructure/website:latest
```
And then restart the service with `:latest`.
TODO: Figure-out some ~sane CI solution (maybe personal Buildkite).
Change-Id: I5734e3344779552aba7e0478321ba99610204e29
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7735
Reviewed-by: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Trying to prune my monthly GCP bill, which is ~$60. Will run my website as a
stateless Google Cloud Run service and see if that'll help.
I still need to figure out what to do with my Quassel instance...
Change-Id: I934b55029f14132af74cabde5e0ddb9e2d3bb933
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7734
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
This seems to have been turned on in ~November/December 2022, and is
wreaking havoc on my system usability as it keeps killing my X session
as soon as any kind of load happens on the system.
This can be as little as accidentally playing two YouTube videos (as
each YouTube tab can take 3-5GiB of RAM), or trying to process a
dataset locally.
I'm not sure if this is the culprit, but it sure seems like it.
Change-Id: Id742b4506262cc362c9fd3f2575aea23e5c092a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7858
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
This is currently hosted by the company, and I'm assigning my
copyright to the company, which also runs an ad placement on the page.
Note that the NixOS module for hosting it has not been moved yet.
Change-Id: Iba9e1cab9370faa79e43c3344fbfbbbabead50b3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7857
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Adds a simple json quasiquoter thingy.
Json can be sent to the `/mailfilter?action=update` endpoint.
Change-Id: Iba80c2ab69178e431519933c4a01cd68aaa9f637
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7839
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Move the tool parsers down. Get `pass` from the tools. Add some
helpers for running tools.
Change-Id: Id2c47be58417faf434966eaae81e4944372f1bd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7838
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
packed_simd is deprecated, but we don't need very much SIMD:
* _mm256_set1_epi8 / vpbroadcastb (splat)
* _mm256_cmpgt_epi8 / vpcmpgtb (comparison)
* _mm256_movemask_epi8 / vpmovmskb (compress to bitmask)
This also simplifies the code by only vectorising the bare minimum,
since we just get a bitmask and operate in scalar mode as soon as
possible.
We don't need nightly Rust anymore: we're using only stable intrinsics.
Change-Id: Id410b5fef2549f3c97f48049f722f1e643e68553
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7687
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
This isn't just a наречие, it also functions as a предлог.
Change-Id: Id2e2ccbe0a8b7f73739289d531b6d1fda81bed2d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7799
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Implement a parser for tools, and instantiate once for
arglib-netencode arguments (parsed by the new netencode parser) and
one just from the PATH for testing from the repl.
Change-Id: Id0cf264100123a87700880c7230d68426224fd0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7798
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
A simple categorical parser that does not implement Monad, and does
not contain an `m` and some rudementary error message handling.
In the future I’d probably want to wrap everything in an additional
`m`, so that subparsers can somehow use `Selective` to throw errors
from within `m` that contain the parsing context if at all possible.
Hard to do without Monad, I have to say. Not even stuff like `StateT`
works without the inner `m` implementing `Monad`.
Change-Id: I1366eda606ddfb019637b09c82d8b0e30bd4e318
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7797
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Wraps a command in some arguments via arglib.
Also refactor the module to be a `let`.
Change-Id: Ie9b64f7d40c57a4e57bd4d6c411bef5ef57a2b59
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7796
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
After experimenting with existing "data engineering solutions" like
datasette, periscope, I think rolling my own dataviz for this project might be
easiest (surprisingly).
**Wish List:**
- Benthos job to dump my financial transactions into a SQL table.
- Scatter plot of expenses (or just transactions generally).
- Support filtering the data using "Simple Select" query language.
- Stacked histogram of income/expenses with a line overlaying the "idealized"
savings.
Change-Id: Iec2948641dba8c4c6d5ad19a0e1ea142b81198af
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7784
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
For my tooling, I want to be able to use vscode language servers for
all subprojects, and the best ways to do that I’ve found so far is to
add a global shell.nix which contains the transitive closure of all
dependencies I need.
This is not /nice/ per se, but it does the job with minimal effort
right now and gives me a good development environment for all these
crazy & dumb experiments in here.
Change-Id: I717a72f490e9d58d45e4e15e9ba604c36b299814
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7794
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This is so we can use the rust language server for the file.
Change-Id: I8a2fe15ea67fd0e26814fda57bf0cace0d264cae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7792
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Instead of compiling the module, run it in interpreted mode. Saves on
linking times and can probably be driven to do cooler things in the
future, like calling functions directly via an environment variable or
something.
Change-Id: I9c835005462cdd86055fb7702630a44f78c36107
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7781
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
In the end, it should be possible to write a single config which is
pushed to the service to steer which emails arrive.
This implements some helper functions and some more endpoints.
We implement Semigroup/Monoid for labelled tuples.
Change-Id: I48bfd311e4a7bba5bc08a9681d823a6a7d5175a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7727
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
