As the comment above the inherit statement says it is supposed to only
contain packages required for //third_party/nix. As much as I like IRC I
can't find a usage of Quassel within Nix itself. Perhaps a plugin to
report build status at some point?
Until that plugin mainfests we might as well move it to the correct
location.
Change-Id: I14fd6b698bb779b80829e7bebd5daa69cacdde78
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2177
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
... mostly some AST boilerplate and a first top-level rule, plus
boilerplate similar to that set up in the Scanner.
Change-Id: I605d1de23c47a3b3702ab4f62cd3371bc3988c7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2194
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Accidentally removed this everywhere when I disabled it for Darwin
Change-Id: Ia3480f1fbc6431a27da8c1de03bf0a66808f46b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2208
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
rustup and rust-analyzer for now, but this will likely also have shell
aliases and the like
Change-Id: I7838e537a72600410205e018a0c86be1493a9ffe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2207
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
To avoid it clogging up git status in the depot
Change-Id: I102126dedb427d632679ee091aced6971495b8cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2206
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
My new work laptop, a dell XPS 13.
Change-Id: Ieab06622c9b280182025edfa63adf649e5fc70d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2205
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
I want to use this as a prefix key instead
Change-Id: Idc865eb2edd1cbeff0b8a849232d98272c21ca8d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2204
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
I've been running a script similar to this after doing Gerrit version
bumps to make sure the schema is up to date, but in the spirit of making
sure someone other that myself can do this task I'm formalising it into
the depot, where I should've put it in the first place.
Change-Id: I50a198e798e2ff26989b01e4bdd0571d85ab62aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2203
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
... and show them to users, very crudely.
Change-Id: If4491b14db1124313f6ab7e5fbfdce9fea501d11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2193
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Note that Lox does not support escapes, and I don't care about that.
Change-Id: Ie848cbc1164c4b005b15e29aad8fe723aaa68d1b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2190
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
To make it easier for future tests to use the arbitrary specialisations
we've defined for some nix types, centralize them all in a single
arbitrary.hh header file.
Change-Id: I767f27949cfe7ec55c79901f7d7aa538d2f98c6b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2182
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Add missing break statements to the big switch block in
BuildResult::FromProto, and cover the whole thing with a rapidcheck
round-trip test.
Change-Id: I7a07ca398cc5f02ca4fd8e6256fd563c6f3aea9d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2178
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Similarly to how we did for buildPaths, add a std::ostream& log_sink
parameter to the build_derivation method on Store, and pass it std::cerr
when called at the top level by nix commands - most notably, the
build-remote hook binary, so that we get build logs when using tvix as a
remote builder.
Change-Id: I0f8f729ba8429d4838a0a135a5c2ac1e1a95d575
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2176
Tested-by: BuildkiteCI
Reviewed-by: andi <andi@notmuch.email>
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Upstream doesn't, and for good reason - this might not be a store path,
for example if it's /bin/sh
Fixes: b/73
Change-Id: If9aa96de2cd8ab941c098a9f122b8b302a92ec38
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2175
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Tested-by: BuildkiteCI
The --quiet and -v/--verbose flags were removed during the glog
conversion in d0c44425e1, which has
previously broken programs like e.g. home-manager, which passes --quiet
to nix-build.
A nix-build-specific workaround was added in
24f9354d5b, which manipulates the
FLAGS_stderrthreshold global variable from glog. This commit moves the
--quiet logic back into the argument handling code in libmain, and adds
corresponding handling for -v/--verbose.
Change-Id: I13d860ebbb78541d9f1236691a1efe8bd2163c67
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2170
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
This was referencing a nonexistent note in buildPaths, for one, but for
another let's get log outputs when calling this RPC.
Change-Id: Ic9d17834b356ea84d69692ccc0249d09777e833b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2173
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Subclasses of std::streambuf are expected to override overflow in
addition to xsputn, as it's called in certain cases by the non-virtual
methods. In our case, this was preventing endlines from getting sent
over the log stream.
Change-Id: I70d00f0c7cb8f8cf2f744f58974c21e7a70a715b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2172
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
- A couple of log messages had double-newlines still
- Remove the [ drvPath ] bit from the "building path" output, since the
derivation path is already present in the message itself.
Change-Id: Ib4b514a18fcb63c7191f4d7cf0a9b857aaa3f3fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2171
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
The "swap-window" command swaps two windows, the 'source' and
'destination' window, exchanging the indices they occupy in the window
list. In at least tmux 2.8 (which is what's in Debian Stable), if the
window under focus is the source window, then focus follows that window
(i.e. the focus changes to the current window's new index atomically
with it being moved to that index).
In more recent tmux versions, this is not the case, and the focus
remains on the old index, so that the replacement window comes under
focus. The former behaviour is still possible, but must be explicitly
requested.
Change-Id: Ieff606dfc2624b869d3bb6e1344dd4d0c6301857
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2169
Reviewed-by: multi <depot@in-addr.xyz>
Tested-by: BuildkiteCI
This allows users to use C-A C to access the QEMU console while within
the VM terminal. From there you can control the process (e.g. kill it).
Change-Id: If2eec2e385fd27fc4e20921dcad78be7390f9d2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2167
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
For the build of tvix we can safely ignore all the files in src/protos
as well as all the nix files in the root of the repository. By passing
the input sources through builtins.filterSource we can make a per-file
decision whether or not we want to copy it into the store (in other
words: if we consider it relevant for the build).
This enables much faster development on the actual build expression.
Change-Id: Ib4c01dbe9cbfa9770922f6257af2a7259814ce0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2159
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
The different signedness of level and withLevel was causing implicit conversions. Use a nullopt instead of a -1 sentinel value.
third_party/nix/src/libexpr/nixexpr.cc:242:21: warning: narrowing conversion from 'unsigned int' to signed type 'int' is implementation-defined [bugprone-narrowing-conversions]
Change-Id: I7c2cadb6fd6bbff6c5b84028651ad4ebba423297
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2157
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
Implicit signedness conversion was causing warnings. Perform a static_cast; this value should never be out of range.
third_party/nix/src/libmain/shared.cc:310:12: warning: narrowing conversion from 'unsigned int' to signed type 'int' is implementation-defined [bugprone-narrowing-conversions]
Change-Id: I34fe53d186ae33f970147135bbe3894fb39a0ec7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2156
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
third_party/nix/src/libstore/sqlite.cc:89:33: warning: narrowing conversion from 'unsigned int' to signed type 'int' is implementation-defined [bugprone-narrowing-conversions]
Change-Id: I1dbc01acaecc4f382f63e7108429cd814ff05f4f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2155
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
... they're just noisy at the moment. This isn't complete because it
doesn't thread through scanner errors.
Change-Id: I0f75d2b20fa3f57be1af5d1d8aa8059856855825
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2162
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This makes it easier to work with the Unicode issue. The original
string representation can be discarded.
Change-Id: I740be4cb9654679ea7950f3899c5c709b1e7a739
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2160
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This was locked away in the urbint-specific module, but I use it
elsewhere.
Change-Id: Ifced2196dc22a9dbed74a18d4e1fed9488eb0e26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2152
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
