There is no help from seeing 32 lines of debug prints about clearing
AP's RSNE/RSNXE information for each potential link when such
information has not been set in the first place. These were printed even
when there is no use of MLO whatsoever, so get rid of the prints for any
case where the value has not yet been set.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Wi-Fi Alliance specification for Automated Frequency Coordination (AFC)
system ensures that the Standard Power Wi-Fi devices can operate in 6
GHz spectrum under favorable conditions, without any interference with
the incumbent devices.
Add support for vendor command/events and corresponding
attributes to define the interface for exchanging AFC requests and
responses between the driver and a userspace application.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Commit 820211245b ("OpenSSL: Fix HPKE in some corner cases") increased
the buffer size for EVP_PKEY_derive() by 16 octets, but it turns out
that OpenSSL might need significantly more room in some cases. Replace a
fixed length buffer with dynamic query for the maximum size and
allocated buffer to cover that need.
This showed up using the following test case sequence:
dbus_pkcs11 module_wpa_supplicant
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Passphrases/PSKs from external password databases were ignored if 4-way
handshake offloading was supported by the driver. Split the PSK loading
functionality into a separate function and calls if to get the PSK for
handshake offloading.
I tested connecting to a WPA2-PSK network with both inline and external
passphrases, using the iwlwifi and brcmfmac drivers.
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
In a system with multiple interfaces, the boot messages as well as the
status information provided by `systemctl` can be confusing without
an immediate way to differentiate between the different interfaces.
Fix this by adding the interface name to the unit description.
Signed-off-by: Gioele Barabucci <gioele@svario.it>
The length of labeled_info is determined separately, so there is no need
to increment the pos pointer after the final entry has been added.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The received frame buffer was already verified to be long enough to
include the Advertisement Protocol element and that element was verified
to have a valid length value, but use of adv_proto[1] in another
function may have been too difficult to figure out for analyzers.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Not only the hash[] array, but also the r0_key_data[] array needs to be
extended in size to fit the longer key and salt.
Fixes: a76a314c15 ("FT: Extend PMK-R0 derivation for FT-SAE-EXT-KEY")
Signed-off-by: Jouni Malinen <j@w1.fi>
Add support for group rekeying in MLO connection. Parse per link MLO
GTK/IGTK/BIGTK KDEs from Group Key msg 1/2 and configure to the driver.
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Use AP MLD address as the destination address for EAPOL-Key 4-way
handshake frames since authenticator/supplicant operates above MLD. The
driver/firmware will use RA/TA based on the link used for transmitting
the EAPOL frames.
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Validate new KDEs defined for MLO connection in EAPOL-Key msg 1/4 and
3/4 and reject the 4-way handshake frames if any of the new KDE data is
not matching expected key data.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Process EAPOL-Key msg 3/4 and configure PTK and per-link GTK/IGTK/BIGTK
keys to the driver when MLO is used.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add support to specify a Link ID for set key operation for MLO
connection. This does not change the existing uses and only provides the
mechanism for extension in following commits.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Configure TK to the driver with AP MLD address with MLO is used. Current
changes are handling only EAPOL-Key 4-way handshake and FILS
authentication cases, i.e., FT protocol case needs to be addressed
separately.
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Use the AP MLD address instead of the BSSID of a link as the
authenticator address in the PMKSA entry.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Use AP MLD address to derive pairwise keys for MLO connection. Current
changes are handling only PTK derivation during EAPOL-Key 4-way
handshake and FILS authentication, i.e., FT protocol case needs to be
addressed separately.
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add new KDEs introduced for MLO connection as specified in
12.7.2 EAPOL-Key frames, IEEE P802.11be/D2.2.
- Add MAC and MLO Link KDE for each own affliated link (other than the
link on which association happened) in EAPOL-Key msg 2/4.
- Add MAC KDE in 4/4 EAPOL frame.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Update the following MLO connection information to wpa_sm:
- AP MLD address and link ID of the (re)association link.
- Bitmap of requested links and accepted links
- Own link address for each requested link
- AP link address, RSNE and RSNXE for each requested link
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Currently only accepted MLO links information is getting parsed from
(re)association events. Add support to parse all the requested MLO links
information including rejected links. Get the rejected MLO links
information from netlink attributes if the kernel supports indicating
per link status. Otherwise get the rejected MLO links information by
parsing (Re)association Request and Response frame elements.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
"make LIBFUZZER=y" was supposed to set CC and CFLAGS to working values
by default if not overridden by something external. That did not seem to
work since the defaults from the other build system components ended up
setting these variables before the checks here. Fix this by replacing
the known default values for non-fuzzing builds.
Signed-off-by: Jouni Malinen <j@w1.fi>
Make sure the elements were present before trying to parse them. This
was already done for most cases, but be consistent and check each item
explicitly before use.
Signed-off-by: Jouni Malinen <j@w1.fi>
The previous version was using typecasting to ignore const marking for
the input buffer to be able to clear the MIC field for MIC calculation.
That is not really appropriate and could result in issues in the future
if the input data cannot be modified. Fix this by using an allocated
copy of the buffer.
Signed-off-by: Jouni Malinen <j@w1.fi>
The way type and subtype of the FC field was checked does not really
work correctly. Fix those to check all bits of the subfields. This does
not really make any practical difference, though, since the caller was
already checking this.
Furthermore, use a helper function to avoid having to maintain two
copies of this same functionality.
Signed-off-by: Jouni Malinen <j@w1.fi>
Currently, PMK parameters in the WPA state machine are set from
configuration only when the interface is initialized. If those
parameters are changed later via D-Bus, the new values don't have any
effect.
Call wpa_sm_set_param() when PMK-related D-Bus properties are changed
to immediately apply the new value; the control interface also does
something similar.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Add the `sae_check_mfp` global option to limit SAE when PMF will
not be selected for the connection.
With this option SAE is avoided when the hardware is not capable
of PMF due to missing ciphers.
With this option SAE is avoided on capable hardware when the AP
does not enable PMF.
Allows falling back to PSK on drivers with the
WPA_DRIVER_FLAGS_SAE capability but do not support the BIP cipher
necessary for PMF. This enables configurations that can fall back
to WPA-PSK and avoid problems associating with APs configured
with `sae_require_mfp=1`.
Useful when `pmf=1` and `sae_check_mfp=1` are enabled and networks
are configured with ieee80211w=3 (default) and key_mgmt="WPA-PSK SAE".
In this configuration if the device is unable to use PMF due to
lacking BIP group ciphers it will avoid SAE and fallback to
WPA-PSK for that connection.
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Document in src/crypto/crypto.h that compressed point format is expected
in DER produced by crypto_ec_key_get_subject_public_key(). This is the
format needed for both SAE-PK and DPP use cases that are the current
users of this function.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Stop listen mode if there is not sufficient time remaining to complete
the Authentication exchange within the current remain-on-channel
operation. This speeds up the operation and avoids some timeouts that
could prevent the provisioning step from completing. This addresses an
issue that was found in the following test case sequence:
dpp_controller_relay_discover dpp_chirp_ap_5g
Similar mechanism was already used for Reconfig Announcement frames, so
reuse that for this case with Presence Announcement frames.
Signed-off-by: Jouni Malinen <j@w1.fi>
When scanning for a new connection, we currently optimize by scanning
all frequencies only when our MCC capabilities will allow an additional
operating frequency, and scan only the existing operating frequencies
otherwise. This is problematic when there the current operating
frequency singularly accounts for one of the shared radio frequencies
because we should be able to switch operating frequencies without adding
to the channel count. Fix this.
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
When these are issued while associated, scanning all channels can take a
significant amount of time. That happened to work for existing test
cases somewhat by accident since the scan was sometimes limited to only
the current operating channel. However, that is now changing and the
following two test cases started failing with the change, so make them
wait longer:
sigma_dut_sae_pw_id_ft sigma_dut_ft_rsnxe_used_mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
Connection attempt could have been intermittently drop when reconnecting
to the same ESS due the current BSS entry getting removed immediately
after the disconnection for the purpose of reconnecting to the same ESS.
Avoid this by not removing a BSS entry for the same ESS when in this
special state of trying to reconnect to the same ESS.
Signed-off-by : WooYong Kim <wykim@newratek.com>
Add a new P2P persistent group formation, re-invocation, and cancel test
to verify that P2P_EXT_LISTEN is avoided and the scan is performed in
the P2P Client role to find the P2P GO for the ongoing P2P persistent
group formation on the current interface.
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
Scans are allowed on the current interface for group formation only when
in the P2P_SEARCH, P2P_IDLE, or P2P_PROVISIONING state. But Extended
Listen timeout being enabled moves to the P2P_LISTEN_ONLY state. Due to
this P2P connection fails if the GO is not found with scans triggerred
before Extended Listen timeout. To avoid this skip Extended Listen
timeout to allow scans during group formation on the current interface.
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
Clone sae_pwe configuration value when creating a new P2P group
interface. This is needed to avoid P2P connection failure at the P2P
Client side due to SAE H2E being disabled in the 6 GHz band operation
when a new group interface is created for the connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
For the 6 GHz opclass 132, ch for loop only allows non-PSC channels { 1,
9, 17, 25, 33, 41, 49,... } to be used. This does not match the IEEE Std
802.11ax-2021 expectation of a 6 GHz-only AP "should set up the BSS with
a primary 20 MHz channel that coincides with a preferred scanning
channel".
Increase ch by 4 to allow PSC channel to be used for 6 GHz BW40.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It's necessary to maintain knowledge of the 6 GHz capability of the
peer. Since the Device Capability field migth change between frames
depending on the context in which they are used, loooking at the last
received message might not always provide accurate information.
Add supports_6ghz bool variable in struct p2p_device, initialize it to
false and set to true if the P2P_DEV_CAPAB_6GHZ_BAND_CAPABLE bit is set
to 1 in any P2P frame that includes the P2P Capability attribute. This
boolean would not be cleared to false at any point in time so that the
info doesn't disappear dynamically.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT to send notification
to application layer about primary netdev of an MLO peer association.
Also define the attributes present in this subcommand.
Signed-off-by: Krunalsinh Padhar <quic_kpadhar@quicinc.com>
Introduce a run time roam configuration for "hand off delay for RX".
This value, in milliseconds, will delay the hand off for the specified
time to receive pending RX frames from the current BSS.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
libpasn.so users, e.g., Wi-Fi Aware module, could use this function
while deriving protocol specific keys using KDK. Move this function to
global scope to allow that.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
struct wpas_pasn is common to both initiator and responder, so rename it
to pasn_data to avoid the "wpas_" prefix that could be seen as a
reference to wpa_supplicant (PASN initiator).
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Wi-Fi Aware uses PASN handshake to authenticate peer devices. Devices
can simply verify each other for subsequent sessions as long as the keys
remain valid after authentication has been successful and pairing has
been established.
In pairing verification, Wi-Fi Aware devices uses PASN Authentication
frames with custom PMKID and Wi-Fi Aware R4 specific verification IEs.
It does not use wrapped data in the Authentication frames. This function
provides support to construct PASN Authentication frames for pairing
verification.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make it clear that this argument is not modified and freed within PASN
processing to be consistent with the only use of it by calling
wpas_pasn_build_auth_1() which has already marked it const.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Wi-Fi Aware defines protocol specific elements in PASN Authentication
frames for pairing setup. Add an option to add this type of custom
elements into PASN frames. This is mainly for the libpasn.so use cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The wpa_s and hapd context are isolated from the PASN initiator and
responder code and this functionality is now in the separate src/pasn
directory. Add option to build libpasn.so with this functionality. This
library can be used by a Wi-Fi Aware component to support NAN pairing
with other devices.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
PASN responder validates auth 1 frame and sends auth 2 frame to the
initiator. It analyses the auth 3 frame and verifies successful
authentication. Wi-Fi Aware modules can reuse this functionality through
a shared library libpasn.so generated from this code. Move the PASN
functionality that is now decoupled from the hapd context into a
separate file in a common directory to make it easier to build such a
library.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
PASN initiator functionality builds auth 1 and auth 3 frames, and
processes auth 2 frame received from the responder. Wi-Fi Aware modules
can reuse this functionality through a shared library libpasn.so
generated from this code. Move the PASN functionality that is now
decoupled from the wpa_s context into a separate file in a common
directory to make it easier to build such a library.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
