Commit graph

1233 commits

Author SHA1 Message Date
Beni Lev
19677b77c3 OCE: Add RSSI based association rejection support (STA)
An AP might refuse to connect a STA if it has a low RSSI. In such case,
the AP informs the STA with the desired RSSI delta and a retry timeout.
Any subsequent association attempt with that AP (BSS) should be avoided,
unless the RSSI level improved by the desired delta or the timeout has
expired.

Defined in Wi-Fi Alliance Optimized Connectivity Experience technical
specification v1.0, section 3.14 (RSSI-based association rejection
information).

Signed-off-by: Beni Lev <beni.lev@intel.com>
2019-01-01 17:56:25 +02:00
Veerendranath Jakkam
dbe7f6da77 Vendor command to query the supported AKMs from the driver
This new QCA vendor command is used to query the supported AKM suite
selectors from the driver. There has been no such capability indication
from the driver and thus the current user space has to assume the driver
to support all the AKMs. This may be the case with some drivers (e.g.,
mac80211-based ones) but there are cfg80211-based drivers that implement
SME and have constraints on which AKMs can be supported (e.g., such
drivers may need an update to support SAE AKM using
NL80211_CMD_EXTERNAL_AUTH). Allow such drivers to specify the exact set
of supported AKMs so that user space tools can determine what network
profile options should be allowed to be configured. This command returns
the list of supported AKM suite selectors in the attribute
NL80211_ATTR_AKM_SUITES.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-21 21:09:48 +02:00
Jouni Malinen
5bcddb9302 DPP: Fix build with LibreSSL 2.8.3
Looks like LibreSSL 2.8 pulled in the OpenSSL API change to mark the
first argument to X509_ALGOR_get0() const.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-21 12:21:03 +02:00
Venkateswara Naralasetty
9c06f0f6ae hostapd: Add Multi-AP protocol support
The purpose of Multi-AP specification is to enable inter-operability
across Wi-Fi access points (APs) from different vendors.

This patch introduces one new configuration parameter 'multi_ap' to
enable Multi-AP functionality and to configure the BSS as a backhaul
and/or fronthaul BSS.

Advertise vendor specific Multi-AP capabilities in (Re)Association
Response frame, if Multi-AP functionality is enabled through the
configuration parameter.

A backhaul AP must support receiving both 3addr and 4addr frames from a
backhaul STA, so create a VLAN for it just like is done for WDS, i.e.,
by calling hostapd_set_wds_sta(). Since Multi-AP requires WPA2 (never
WEP), we can safely call hostapd_set_wds_encryption() as well and we can
reuse the entire WDS condition.

To parse the Multi-AP Extension subelement, we use get_ie(): even though
that function is meant for parsing IEs, it works for subelements.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 01:04:14 +02:00
Mathy Vanhoef
f9da7505bf OCV: Include and verify OCI in SA Query frames
Include an OCI element in SA Query Request and Response frames if OCV
has been negotiated.

On Linux, a kernel patch is needed to let clients correctly handle SA
Query Requests that contain an OCI element. Without this patch, the
kernel will reply to the SA Query Request itself, without verifying the
included OCI. Additionally, the SA Query Response sent by the kernel
will not include an OCI element. The correct operation of the AP does
not require a kernel patch.

Without the corresponding kernel patch, SA Query Requests sent by the
client are still valid, meaning they do include an OCI element.
Note that an AP does not require any kernel patches. In other words, SA
Query frames sent and received by the AP are properly handled, even
without a kernel patch.

As a result, the kernel patch is only required to make the client properly
process and respond to a SA Query Request from the AP. Without this
patch, the client will send a SA Query Response without an OCI element,
causing the AP to silently ignore the response and eventually disconnect
the client from the network if OCV has been negotiated to be used.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:42:23 +02:00
Mathy Vanhoef
697652085f OCV: Add function to verify a received OCI element
ocv_verify_tx_params() verifies that the receive OCI element includes
field values that are compatible with the local channel configuration.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00
Mathy Vanhoef
f53aeff415 OCV: Parse all types of OCI information elements
Add functionality to parse all variations of the OCI element.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00
Mathy Vanhoef
6ab73efa72 OCV: Add utility functions to insert OCI elements
This commit adds utility functions to insert various encoding of the OCI
element.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00
Mathy Vanhoef
b1d05aee8b OCV: Protocol definitions
Define protocol identifiers for Operating Channel Verification (OCV)
based on IEEE P802.11-REVmd/D2.0.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Mathy Vanhoef
d706e0d7a3 Add functions to convert channel bandwidth to an integer
This adds two utility functions to convert both operating classes and
and the chan_width enum to an integer representing the channel
bandwidth. This can then be used to compare bandwidth parameters in an
uniform manner.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 18:35:30 +02:00
Mathy Vanhoef
dbe473fd22 Add utility function to derive operating class and channel
This function can be used to easily convert the parameters returned
by the channel_info driver API, into their corresponding operating
class and channel number.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 18:35:30 +02:00
Jouni Malinen
2205ca0dfe HS 2.0: Update supported release number to 3
Release 3 functionality is included, so start advertising support for
that release.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Peng Xu
891e1668c0 hostapd: Update HE Capabilities and Operation element definition
Update HE Capabilities/Operation element definition based on IEEE
P802.11ax/D3.0.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-07 15:17:02 +02:00
Edayilliam Jayadev
4c02242d04 Define spectral scaling parameters as QCA vendor specific attributes
Add spectral scaling parameters as vendor attributes to the
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO vendor subcommand.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-04 20:57:32 +02:00
Jouni Malinen
368c9dc0bd The master branch is now used for v2.8 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 22:55:28 +02:00
Jouni Malinen
c2c6c01bb8 Update version to v2.7 and copyright years to include 2018
Also add the ChangeLog entries for both hostapd and wpa_supplicant to
describe main changes between v2.6 and v2.7.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Jouni Malinen
4a450ba201 DPP: Do not reply to PKEX request with identifier if no local identifier
The reverse case (local identifier configured but no identifier
received) was already covered, but PKEX is not going to complete
successfully if there is any difference in identifier configuration, so
ignore this other case as well. This avoids unnecessary responses to
PKEX requests with identifier from a device that is ready for PKEX in
general, but not for that particular request.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 12:30:11 +02:00
Jouni Malinen
810bedf23f DPP: Check own_bi/peer_bi pointers more consistently
This gets rid of smatch warnings about a dereference before check.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-30 21:28:19 +02:00
Jouni Malinen
89b6d8a2f0 DPP: Fix no-Status protocol testing in Auth Resp error case
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-27 17:20:41 +02:00
Sunil Dutt
acecac4c79 Define QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES also as an event
This commit enhances QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES to
also be an event, aimed to notify the link status (EX: connected
stations status on an AP link).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-27 00:27:18 +02:00
Jouni Malinen
06e62e11c7 DPP: Fix a debug print to use quotation marks consistently
The "DPP: Unexpected JWK kty" debug print missed one of the quotation
marks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 17:31:49 +02:00
Jouni Malinen
11f07f027a DPP: Fix error path handling for GAS Comeback Response building
A local memory allocation failuring during GAS Comeback Response frame
generation could result in freeing the response context without removing
it from the list. This would result in dereferencing freed memory when
processing the next comeback request.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 13:51:26 +02:00
Jouni Malinen
c7896ef9c6 DPP: Fix memory leaks in GAS server error path handling
If local memory allocation for the GAS response failed, couple of error
paths ended up leaking some memory maintaining the state for the
exchange. Fix that by freeing the context properly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 13:49:44 +02:00
Jouni Malinen
dc673aec46 HS 2.0: Generate AssocReq OSEN IE based on AP advertisement
Parse the OSEN IE from the AP to determine values used in the AssocReq
instead of using hardcoded cipher suites. This is needed to be able to
set the group cipher based on AP advertisement now that two possible
options exists for this (GTK_NOT_USED in separate OSEN BSS; CCMP or
GTK_NOT_USED in shared BSS case). Furthermore, this is a step towards
allowing other ciphers than CCMP to be used with OSEN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:07:16 +02:00
Sachin Ahuja
d554402140 Define new QCA vendor command for coex priority config
Add QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG vendor command
to set the priorities among different types of traffic of
WLAN/BT/Zigbee during coex scenarios.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 00:20:09 +02:00
vamsi krishna
a626fb1070 Add QCA vendor event to indicate throughput changes
Add interface for drivers to report changes in TX/RX throughput
dynamically to user space. This information can be used by userspace
tools to tune kernel's TCP parameters in order to achieve peak
throughput. The driver may optionally provide guidance on which TCP
parameters to be configured for optimal performance along with the
values to be configured.

The TCP parameters that need to be tuned for peak performance are not
interface specific. Based on the guidance from the driver and
considering the other interfaces that may be affected with the new
configurations, a userspace tool has to choose the values to be
configured for these parameters to achieve optimal performance across
interfaces.

The throughput levels informed by the driver with this event are only
for providing guidance on TCP parameter tuning from userspace. The
driver may change the thresholds used to decide low or medium or high
throughput levels based on several parameters based on the PHY layer
capacity in the current connection, the number of packets being
dispatched per second, or the number of packets pending in queues, etc.
The throughput levels may not be consistent with the actual throughput
of the link.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-08 21:56:58 +02:00
Kiran Kumar Lokere
5d332a13f7 Add test config QCA vendor attribute for action frame Tx in TB PPDU
Add a new wifi test config QCA vendor attribute to configure action
frame transmission in HE trigger based PPDU.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:10:18 +02:00
Kiran Kumar Lokere
a94aab6ddd Define test config QCA vendor attribute for HE SU PPDU Tx config
Add a new wifi test config QCA vendor attribute to configure HE
single user PPDU transmission.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:09:38 +02:00
Kiran Kumar Lokere
292bce08b3 Define test config QCA vendor attribute for HE OM control config
Add a new wifi test config QCA vendor attributes to configure HE
operating mode control field bandwidth, number of spatial streams, and
UL MU disable configuration. Define a new attribute to clear the
previously set HE OM control field configuration. This is used for
testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-02 12:09:22 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Peng Xu
2f186d598a Define vendor specific NDP attribute for peer NDPE support
Add NAN NDP attribute QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT which
indicates if NDP remote peer supports NDPE attribute or not.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-19 20:44:44 +03:00
Visweswara Tanuku
77fcd74753 QCA vendor subcommand and attributes to configure capture of CFR data
Add a subcommand for Channel Frequency Response (CFG) Capture
Configuration and define attributes for configuring CFR capture
parameters per peer and enabling/disabling CFR capture.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-11 12:12:30 +03:00
Jouni Malinen
cad810a98f HS 2.0: OSU Provider NAI List advertisement
Extend hostapd to allow the new OSU Provider NAI List ANQP-element to be
advertised in addition to the previously used OSU Providers list
ANQP-element. The new osu_nai2 configurator parameter option is used to
specify the OSU_NAI value for the shared BSS (Single SSID) case while
osu_nai remains to be used for the separate OSU BSS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:49:42 +03:00
vamsi krishna
edb509d49f Add QCA vendor event to report roam scan events
Driver/firmware does roam scan when it finds the need to roam to a
different BSS. Add a QCA vendor event to indicate such roam scan events
from driver/firmware to user space.

Please note that some drivers may not send these events in few cases,
e.g., if the host processor is sleeping when this event is generated in
firmware to avoid undesired wakeups.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-04 00:31:45 +03:00
Ankita Bajaj
820ea0ba93 DPP: Fix a memory leak on Configurator keygen error path
The allocated configuration structure needs to be freed if the specified
curve is not supported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:22:42 +03:00
Ankita Bajaj
5a052f92eb DPP: Fix a memory leak in L derivation
The temporary EC_POINT 'sum' needs to be freed at the end of the
function with the other OpenSSL allocations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:21:14 +03:00
Ankita Bajaj
bae282e3e8 DPP: Fix an error path memory leak in URI public key parsing
The allocated buffer from base64_decode() needs to be freed on the
sha256_vector() error path.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-21 21:20:06 +03:00
Varun Reddy Yeturu
60377efcc1 QCA vendor command support for TWT test configuration
Define new QCA vendor specific test config attributes to configure TWT.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-18 13:03:02 +03:00
Jouni Malinen
2b92c4f3c0 DPP: Fix test functionality for invalid keys with OpenSSL 1.1.0
It looks like at least OpenSSL 1.1.0i includes the extra checks in
EC_POINT_set_affine_coordinates_GFp() that break the previously used
mechanism for generating invalid keys. Fix this by using the alternative
design that was used with OpenSSL 1.1.1 and BoringSSL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-17 17:23:10 +03:00
Jouni Malinen
3ecb8a5203 ANQP: Parse and report Venue URL information
Parse the Venue URL ANQP-element payload and report it with the new
RX-VENUE-URL event messages if the query was done using PMF.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-15 05:17:49 +03:00
Kiran Kumar Lokere
13dd13fc01 Define test config attribute to configure OM control support
Define a new QCA vendor specific test config attribute to configure the
support for receiving the MPDU with operating mode control subfield.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-06 00:01:57 +03:00
Purushottam Kushwaha
20f612d998 DPP: Set group id through DPP_AUTH_INIT or dpp_configurator_params
This enhances DPP_AUTH_INIT, DPP_CONFIGURATOR_SIGN, and SET
dpp_configurator_params to allow optional setting of the DPP groupId
string for a Connector. If the value is not set, the previously wildcard
value ("*") is used by default.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-30 23:34:00 +03:00
Nachiket Kukade
495aebd39f Add new QCA vendor command and attributes to enhance NAN
The payload used for the existing NAN vendor command,
QCA_NL80211_VENDOR_SUBCMD_NAN is a binary blob of data. This
command is not extendable to send additional information. Hence
define a new vendor command QCA_NL80211_VENDOR_SUBCMD_NAN_EXT,
that can carry the binary blob encapsulated within an attribute
and can carry additional attributes to enhance the NAN command
interface. Define additional 3 new attributes for conveying
type of NAN subcmd and channel information.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-30 22:55:19 +03:00
Nachiket Kukade
28c7f77a85 Correct the documentation of NAN vendor command
Present implementation of NAN vendor command does not use
attribute encapsulation for sending the command from userspace
to the driver, payload is directly sent as is. Attribute
QCA_WLAN_VENDOR_ATTR_NAN is used only for receiving vendor
events in the userspace from the driver. Update the doc as per
this implementation.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-30 22:50:17 +03:00
Kiran Kumar Lokere
1bac151eaf Change the ADDBA buffer size attribute type to U16 from U8
The max supported ADDBA buffer size value is 256, so change
the buffer size attribute type to U16 to configure the testbed
device to use the 256 buffer size in ADDBA negotiation in 11ax
testing.

This attribute is used only to configure a testbed device and the old
definition of this attribute was not used in any deployed implementation
hence it is still justifiable to change the definition.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-24 16:27:34 +03:00
Srinivas Dasari
d35003e501 Vendor attribute to get max blacklist BSSIDs capability
Add a QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_BLACKLIST_BSSID to get maximum
blacklist BSSIDs capability from the driver for gscan.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-24 16:27:34 +03:00
xiaofeis
1ff8605775 mka: Support GCM-AES-256
GCM-AES-256 cipher suite is defined in IEEE Std 802.1AEbn-2011.

If authenticator configured as GCM-AES-256, the distributed SAK will be
256 bits indicated by the GCM-AES-256 ID in the MKA packet.

This patch will make AES Key Unwrap to 32 bytes of SAK when identify the
ID.

Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
2018-08-21 19:28:20 +03:00
Kiran Kumar Lokere
cbdf5a49c8 Define test config vendor attribute to override MU EDCA
Add a new test config QCA vendor attribute to override the MU EDCA
parameters to default values in the driver for test configuration. This
is used for configuring the testbed device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-01 17:38:47 +03:00
Kiran Kumar Lokere
420b5dd814 Define test config QCA vendor attribute for HE MAC padding duration
Add a new wifi test config QCA vendor attribute to configure HE
trigger frame MAC padding duration value in the driver.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-07-06 21:27:01 +03:00
Kiran Kumar Lokere
7bf86e4416 Define test config QCA vendor attribute for HE MU EDCA params
Add a new wifi test config QCA vendor attributes to configure
HE MU EDCA parameters value in the driver.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-07-03 18:12:44 +03:00
Kiran Kumar Lokere
6cc77193c6 Define test config QCA vendor attribute for Tx beamformee NSTS
Add a new wifi test config QCA vendor attribute to configure Tx
beamformee number of space-time streams value in the driver.
This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-28 18:37:01 +03:00
Jouni Malinen
a10f5714cc HS 2.0: Allow Hotspot 2.0 version number to be overridden for build
This can be used for testing and development purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-18 20:11:52 +03:00
Jouni Malinen
c3e4f40cd6 FT: Derive PMKR0Name/PMKR1Name using SHA-384 with AKM 00-0F-AC:13
The AKM 00-0F-AC:13 is supposed to use cryptographic algorithms
consistently, but the current IEEE 802.11 standard is not doing so for
the key names: PMKID (uses SHA-1), PMKR0Name/PMKR1Name (uses SHA-256).
The PMKID case was already implemented with SHA-384 and this commit
replaces use of SHA-256 with SHA-384 for PMKR0Name/PMKR1Name derivation
to be consistent in SHA-384. While this is not compliant with the
current IEEE 802.11 standard, this is clearly needed to meet CNSA Suite
requirements. Matching change is being proposed in REVmd to get the IEEE
802.11 standard to meet the use case requirements.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-06 23:59:46 +03:00
Jouni Malinen
df3bf6870b FT: Debug print of IE parsing element details
This makes it easier to debug issues in processing FT frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
9a33737a0b FT: FTE parsing for SHA384-based AKM
The MIC field is now a variable length field, so make the FTE parser
aware of the two different field lengths.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Jouni Malinen
994eac7e61 FT: PMK-R0 derivation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Jouni Malinen
1655e81c97 FT: PMKID derivation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Jouni Malinen
40a2eb1164 FT: PTK derivation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Jouni Malinen
7880a6a2b8 FT: PMK-R1 derivation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:52 +03:00
Jouni Malinen
b327026a72 FT: FTE MIC calculation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:52 +03:00
Jouni Malinen
c49a9d6b99 FT: EAPOL-Key MIC calculation using SHA384-based AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:52 +03:00
Jouni Malinen
a3e18dbb6a FT: Support variable length keys
This is a step in adding support for SHA384-based FT AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:52 +03:00
Jouni Malinen
c22bb5bba6 FT: SHA384-based AKM in RSNE processing
This defines key lengths for SHA384-based FT AKM and handles writing and
parsing for RSNE AKMs with the new value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 01:11:41 +03:00
Sachin Ahuja
b829e4b694 Add a QCA vendor command attribute to enable/disable GTX
This commit adds a new vendor command attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_GTX in
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION to enable/disable green
Tx power saving feature.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-24 18:47:48 +03:00
Jouni Malinen
9be19d0b9c SAE: Add support for using the optional Password Identifier
This extends the SAE implementation in both infrastructure and mesh BSS
cases to allow an optional Password Identifier to be used. This uses the
mechanism added in P802.11REVmd/D1.0. The Password Identifier is
configured in a wpa_supplicant network profile as a new string parameter
sae_password_id. In hostapd configuration, the existing sae_password
parameter has been extended to allow the password identifier (and also a
peer MAC address) to be set. In addition, multiple sae_password entries
can now be provided to hostapd to allow multiple per-peer and
per-identifier passwords to be set.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:30:29 +03:00
Naveen Rawat
4e47eec5a9 Add QCA NAN vendor attributes to provide IPv6 information
Add NAN attributes to communicate IPv6 address, port, and protocol
between wifihal and host driver.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-17 22:10:15 +03:00
Jeff Johnson
6965705bf5 Fix style issues in qca-vendor.h
Over time a number of style issues have crept into qca-vendor.h,
so fix most of them. There are some identifiers and comments which
exceed 80 columns, but these are left as-is for readability.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00
Kiran Kumar Lokere
7d66e7c408 Define new QCA feature flag for self managed regulatory support
This can be used to determine which mechanism to use for configuring
country code from trusted sources.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00
Kiran Kumar Lokere
38f60142d2 Define test config vendor attribute for Tx beamformee configuration
Add a new wifi test config QCA vendor attribute to configure Tx
beamformee in the driver. This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00
Edayilliam Jayadev
98b806b03d Add QCA vendor attribute for spectral hardware generation
Add spectral hardware generation attribute to
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO vendor command.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-04 20:44:05 +03:00
Jouni Malinen
2439714f90 DPP: Fix testing code for invalid keys with OpenSSL 1.1.1
OpenSSL started reporting failures from
EC_POINT_set_affine_coordinates_GFp() similarly to BoringSSL, so use the
same workaround to enable this protocol testing case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 12:02:57 +03:00
Karthikeyan Periyasamy
6b21df0bb7 Add QCA vendor command/attr to filter frames from other BSSs
Add commands to allow an AP to configure filtering rules to capture
frames from stations that are active on the operating channel, but
not associated to this AP. Operations include add/delete the filter
and get the statistics information of the unassociated stations.

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
2018-04-26 17:56:22 +03:00
Jouni Malinen
f456940ef3 HS 2.0: CoA-Request processing for Terms and Conditions filtering
Extend RADIUS DAS to support CoA-Request packets for the case where the
HS 2.0 Terms And Conditions filtering VSA is used to remove filtering.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-25 12:57:46 +03:00
mazumdar
d239ab3962 DFS: Mark channels required DFS based on reg-domain info from the driver
Mark a channel as required DFS based on regulatory information received
from the driver/kernel rather than deciding based on hardcoded
boundaries on the frequency. Previously few channels were being marked
as requiring DFS even though they were non-DFS in a particular country.

If the driver does not provide channel list information, fall back to
the previously used frequency-based determination.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
7fc6a024f9 HS 2.0: Process received Terms and Conditions Acceptance notification
Extend wpa_supplicant WNM-Notification RX handling to parse and process
received Terms and Conditions Acceptance notifications. If PMF is
enabled for the association, this frame results in control interface
indication (HS20-T-C-ACCEPTANCE <URL>) to get upper layers to guide the
user through the required acceptance steps.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
8760b9848c HS 2.0: Send Terms and Conditions Acceptance notification
This extends hostapd Access-Accept processing to check if the RADIUS
server indicated that Terms and Conditions Acceptance is required. The
new hs20_t_c_server_url parameter is used to specify the server URL
template that the STA is requested to visit.

This commit does not enable any kind of filtering, i.e., only the part
of forwarding a request from Access-Accept to the STA using
WNM-Notification is covered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Bhagavathi Perumal S
1952b626ba hostapd: Add ctrl iface indications for WDS STA interface
This allows user to get event indication when a new interface is
added/removed for 4addr WDS STA and also WDS STA ifname is informed
through the STA command.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
2598e69303 FILS: Enable SHA256 KDF even without PMF/SAE in the build
While it is unlikely that FILS would be used without PMF or SAE in the
build, it is possible to generate such a build and as such, it would be
good for the KDF selection to work properly. Add CONFIG_FILS as an
independent condition for the SHA256-based KDF. Previously, this
combination would have resulted in failure to derive keys and terminated
key management exchange.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
67cca34645 HS 2.0: Copy Roaming Consortium OI from (Re)AssocReq to Access-Request
This extends hostapd processing of (Re)Association Request frames to
store a local copy of the Consortium OI within the Roaming Consortium
Selection element, if present, and then add that in HS 2.0 Roaming
Consortium attribute into RADIUS Access-Request messages.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:47 +03:00
Jouni Malinen
6a8a04d742 HS 2.0: Add fetching of Operator Icon Metadata ANQP-element
This extends wpa_supplicant Hotspot 2.0 ANQP routines to allow the
Operator Icon Metadata ANQP-element to be fetched with "ANQP_GET <bssid>
hs20:12". The result is available in the new hs20_operator_icon_metadata
entry in the "BSS <bssid>" output.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:42 +03:00
Jouni Malinen
5ecdf06c8c DPP: Fix build with LibreSSL v2.5
The ECDSA_SIG_{set,get}0() wrappers are needed with LibreSSL v2.5 (but
not v2.7.2).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-15 00:01:35 +03:00
Jouni Malinen
4b603f01de DPP: Fix X509_ALGOR_get0() use with LibreSSL
At least LibreSSL v2.7.2 indicates support for OpenSSL API 1.1.0, but it
does not apparently use const ASN1_OBJECT * with X509_ALGOR_get0(). Use
the older non-const version here with LibreSSL to fix compilation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-15 00:01:35 +03:00
Jouni Malinen
8e402d1657 WPA: Fix a typo in a debug message
"PT derivation" was supposed to be saying "PTK derivation".

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-08 19:44:53 +03:00
Jouni Malinen
1bd131105b Clear pmk_len more consistently for extra protection
This gives more protection against unexpected behavior if RSN supplicant
code ends up trying to use sm->pmk[] with a stale value. Couple of the
code paths did not clear sm->pmk_len explicitly in cases where the old
PMK is being removed, so cover those cases as well to make sure these
will result in PMK-to-PTK derivation failures rather than use of
incorrect PMK value if such a code path could be reached somehow.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-08 19:44:05 +03:00
Kiran Kumar Lokere
26e0ada47f Define new test config attribute for HE LTF configuration
Add a new wifi test config attribute to configure HE LTF in the
driver. This is used for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-06 23:41:06 +03:00
Ahmed ElArabawy
45f7574d31 Propagate the EAP method error code
In the current implementation, upon an EAP method failure, followed by
an EAP failure, the EAP Status is propagated up in wpa_supplicant with a
general failure parameter string "failure". This parameter is used for a
notification on the dbus.

This commit reports the EAP method failure error code in a separate
callback.

The solution in this commit is generic to all EAP methods, and can be
used by any method that need to pass its error code. However, this
commit only implements the reporting for EAP-SIM and EAP-AKA methods
where the Notification Code (in AT_NOTIFICATION) is used as the method
specific error code value.

Signed-off-by: Ahmed ElArabawy <arabawy@google.com>
2018-03-31 11:57:33 +03:00
Kabilan Kannan
7cfe2f0011 Add SAR V2 power selection capability (QCA vendor attributes)
Add changes to select SAR V2 power limits using the existing QCA vendor
command.

Signed-off-by: Kabilan Kannan <kabilank@codeaurora.org>
2018-03-30 10:49:11 +03:00
Jouni Malinen
2f37387812 FILS: Add more complete support for FT-FILS use cases
This extends the original IEEE Std 802.11ai-2016 functionality with the
changes added in REVmd to describe how additional keys are derived to
protect the FT protocol using keys derived through FILS authentication.

This allows key_mgmt=FT-FILS-SHA256 to be used with FT protocol since
the FTE MIC can now be calculated following the changes in REVmd. The
FT-FILS-SHA384 case is still unsupported (it needs support for variable
length MIC field in FTE).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-26 12:31:04 +03:00
Jouni Malinen
1778f1e9a4 SAE: Fix PTK derivation to use KDF-SHA256
The previous implementation ended up defaulting to using PRF-SHA1 for
deriving PTK from PMK when SAE was used. This is not correct since the
SAE AKM is defined to be using SHA-256 -based KDF instead. Fix that.

Note: This change is not backwards compatible. Both the AP and station
side implementations will need to be updated at the same time to
maintain functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-23 18:44:48 +02:00
Tamizh chelvam
ec2b5173ce Make STA opmode change event available to upper layers
Add an event callback for EVENT_STATION_OPMODE_CHANGED to allow
user/application to get the notification whenever there is a change in a
station's HT/VHT op mode.

The new events:
STA-OPMODE-MAX-BW-CHANGED <addr> <20(no-HT)|20|40|80|80+80|160>
STA-OPMODE-SMPS-MODE-CHANGED <addr> <automatic|off|dynamic|static>
STA-OPMODE-N_SS-CHANGED <addr> <N_SS>

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
2018-03-19 20:07:22 +02:00
Purushottam Kushwaha
8179ae3a2a DPP: Support retrieving of configurator's private key
To retain configurator information across hostapd/wpa_supplicant
restart, private key need to be maintained to generate a valid pair of
authentication keys (connector, netaccess_key, csign) for new enrollees
in the network.

Add a DPP_CONFIGURATOR_GET_KEY control interface API through which the
private key of an existing configurator can be fetched.

Command format:
DPP_CONFIGURATOR_GET_KEY <configurator_id>

The output from this command can then be used with
"DPP_CONFIGURATOR_ADD key=<hexdump>" to create the same key again.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-16 20:55:32 +02:00
Jouni Malinen
4bc801ab42 SAE: Fix EAPOL-Key integrity and key-wrap algorithm selection
The SAE AKM 00-0F-AC:8 is supposed to use EAPOL-Key Key Descriptor
Version 0 (AKM-defined) with AES-128-CMAC and NIST AES Key Wrap.
However, the previous implementation ended up using Key Descriptor
Version 2 (HMAC-SHA-1-128 and NIST AES Key Wrap). Fix this by using the
appropriate Key Descriptor Version and integrity algorithm. Use helper
functions to keep the selection clearer and more consistent between
wpa_supplicant and hostapd uses.

Note: This change is not backwards compatible. Both the AP and station
side implementations will need to be updated at the same time to
maintain functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-16 13:36:42 +02:00
Kiran Kumar Lokere
01542e6517 Add new WiFi test config attributes to configure BA params
Define a new WiFi test configuration attributes in QCA vendor
command to configure BA session parameters and to add or
delete a BA session and to configure no ack policy.
This is used for configuring the testbed device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-03 00:12:39 +02:00
Kiran Kumar Lokere
ba60804419 Add new WiFi test config attribute to allow WEP/TKIP in HE
Define a new WiFi test configuration attribute in QCA vendor
command to allow or not to allow WEP/TKIP in HT/VHT/HE mode.
This is used for configuring the testbed device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-03 00:09:19 +02:00
Jouni Malinen
087474512f SAE: Debug print group support in the crypto library
This makes it easier to understand why "SAE: Failed to select group"
debug entry shows up in cases the selected crypto library does not
support a specific group.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-02 21:27:30 +02:00
Ben Greear
4ab0f11b80 Allow HT40 on 5 GHz channels 165 and 169
India supports 5 GHz channels 169 and 173 now. Enable HT40 across
channels 165 and 169. Leave channel 173 to remain HT20 only.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2018-02-17 18:52:01 +02:00
Vamsi Krishna
a4016163e8 Extend APF interface for read/write and enable/disable ops
Enhance QCA vendor specific APF interface to support write/read program
and/or data and to enable/disable APF feature.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-15 00:26:06 +02:00
Kiran Kumar Lokere
5ac4346426 Define new QCA vendor sub command for wifi test configuration
Define a new QCA vendor sub command for configuring the device with wifi
test configuration. Add new test config attributes for this sub command
that are used to configure the device for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 12:11:47 +02:00
Simon Dinkin
d1e3d40d04 common: Fix the description of wpa_ctrl_request() function
The blocking timeout of this function was changed from 2 seconds to 10
seconds in this commit 1480633f ("Use longer timeout in
wpa_ctrl_request()"), but the description was never changed accordingly.

Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-02-03 12:42:15 +02:00
Guisen Yang
8678b14faa Add new QCA vendor commands for thermal shutdown
Add new QCA vendor commands and attributes to get thermal information
and send thermal shutdown related commands. Indicates the driver to
enter the power saving mode or resume from the power saving mode based
on the given temperature and thresholds.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:35:06 +02:00
Subhani Shaik
2cc2a0a7ea Extend QCA vendor NDP params to support schedule update indication
Add additional NDP attributes and NDP subcommand value which is
provided as part of schedule update indication from driver/firmware
to HAL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-29 20:43:10 +02:00
Subhani Shaik
a7769f6da2 Update QCA vendor commands to match ASOP
This updates QCA vendor command and attribute definitions to match AOSP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-29 20:40:54 +02:00
Jouni Malinen
fe3f81e6a8 DPP: Update PKEX role-specific points
The y coordinates for some of these PKEX role-specific points were
changed in the PKEX specification, so update the implementation to
match.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-26 18:06:49 +02:00
Venkateswara Swamy Bandaru
b4cd8b7e1a Add QCA vendor command and attributes for MSDU queue depth threshold
This allow MSDU queue depth threshold in target to be set per peer per
TID. This command contains MAC address, TID, update mask, and threshold
values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-22 10:56:26 +02:00
Jouni Malinen
630ea13346 DPP: Track M.x/N.x/L.x availability for ke derivation
This prevents an issue where duplicated Authentication Response frame
could have resulted in deriving a new ke value after M.x had already
been cleared. This would result in the following configuration exchange
failing. This could happen since many driver do not filter out
retransmitted Public Action frames and link layer. Furthermore, this
could have been used as a denial-of-service attack agains the DPP
exchange.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-21 11:13:01 +02:00
Sunil Dutt
c103c0b516 Extend NUD Stats to collect the data packet statistics
This commit extends the existing QCA vendor specific NUD_STATS_GET/SET
interface to also collect the statistics of the data packets. The
intention here is to get more comprehensive information to detect the
network unreachability.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-12 23:07:15 +02:00
Sunil Dutt
9cc8303d32 Add QCA vendor command to get the WLAN MAC information
This commit introduces a QCA vendor command that provides the current
information of WLAN hardware MAC and its associated WLAN netdev
interfaces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-12 00:50:45 +02:00
Jouni Malinen
fd92095491 DPP: Report reception of Config Request to upper layers
This is mainly for protocol testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-12 00:50:45 +02:00
Jouni Malinen
c4fc7e31c7 SAE: Set special Sc value when moving to Accepted state
Set Sc to 2^16-1 when moving to Accepted state per IEEE Std 802.11-2016,
12.4.8.6.5 (Protocol instance behavior - Confirmed state). This allows
the peer in Accepted state to silently ignore unnecessary
retransmissions of the Confirm message.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-27 12:19:08 +02:00
Jouni Malinen
abcbd0604c SAE: Add Rc variable and peer send-confirm validation
This implements the behavior described in IEEE Std 802.11-2016,
12.4.8.6.6 (Protocol instance behavior - Accepted state) to silently
discard received Confirm message in the Accepted state if the new
message does not use an incremented send-confirm value or if the special
2^16-1 value is used. This avoids unnecessary processing of
retransmitted Confirm messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-27 12:19:08 +02:00
Jouni Malinen
9249afc8e1 SAE: Print state changes in debug log
This makes it easier to follow state changes in SAE protocol instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-27 00:07:42 +02:00
Jouni Malinen
d8b841eba8 SAE: Make dot11RSNASAESync configurable
The new hostapd.conf parameter sae_sync (default: 5) can now be used to
configure the dot11RSNASAESync value to specify the maximum number of
synchronization errors that are allowed to happen prior to
disassociation of the offending SAE peer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-26 12:46:22 +02:00
Peng Xu
61536b5f41 Add new QCA vendor attribute for getting preferred channel
A new vendor attribute QCA_WLAN_VENDOR_ATTR_GET_WEIGHED_PCL is added for
getting preferred channels with weight value and a flag to indicate how
the channels should be used in P2P negotiation process.

Signed-off-by: Peng Xu <pxu@qti.qualcomm.com>
2017-12-22 20:34:51 +02:00
Jouni Malinen
1a2cb20d5b Fix couple of QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS comments
Copy-paste errors in the command name (set vs. the new get).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-22 18:57:47 +02:00
Sunil Dutt
2fca2d2144 Vendor parameter for forcing RSNE override
Indicates the driver to use the RSNE as-is from the connect interface.
Exclusively used for the scenarios where the device is used as a testbed
device with special functionality and not recommended for production.
This helps driver to not validate the RSNE passed from user space and
thus allow arbitrary IE data to be used for testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-22 18:43:55 +02:00
Jeff Johnson
2d942ec4ac Define a QCA vendor command to retrieve SAR Power limits
Previously commit c79238b6a4 ('Define a
QCA vendor command to configure SAR Power limits') implemented a vendor
command interface to allow a userspace entity to dynamically control the
SAR power limits. Now implement a command to retrieve the current SAR
power limits.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-15 20:55:15 +02:00
Jouni Malinen
c23e87d0d1 OpenSSL: Replace EVP_PKEY_paramgen() with EC_KEY_new_by_curve_name()
The BoringSSL version of crypto_ecdh_init() and dpp_gen_keypair() works
fine with OpenSSL as well, so use that same implementation for both to
avoid unnecessary maintanence of multiple versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-10 23:49:39 +02:00
Jouni Malinen
7641d485db BoringSSL: Use EC_KEY_new_by_curve_name() to simplify implementation
There is no need to go through EC_GROUP_new_by_curve_name(),
EC_KEY_new(), and EC_KEY_set_group() when a single call to
EC_KEY_new_by_curve_name() takes care of all that.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-10 23:41:29 +02:00
Jouni Malinen
a5da39607d Revert "BoringSSL: Add DPP special cases regardless of claimed version number"
This reverts commit 5548453a2d since
BoringSSL added ECDSA_SIG_set0() and ECDSA_SIG_get0() in commit
8dc226ca8f1ef60737e1c1bf8cfcabf51d4068c7 ('Add some missing OpenSSL
1.1.0 accessors.') and updated X509_ALGOR_get0() prototype to match
OpenSSL 1.1.0 changes in commit e3b2a5d30d309091cab3e6a19dee7323c40d968d
('Const-correct X509_ALGOR_get0.').

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-12-10 23:27:04 +02:00
Paul Zhang
9b0de99fac Add new QCA vendor attribute for WLAN Latency Module (WLM)
A new vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL is added
for vendor sub-command QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION.
This attribute is for setting the level of WLM.

Signed-off-by: Paul Zhang <paulz@qti.qualcomm.com>
2017-12-08 14:15:19 +02:00
Jouni Malinen
055cd39788 tests: DPP P-256 test vectors
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-07 13:35:19 +02:00
Jouni Malinen
f55269753c DPP: Allow protocol key to be overridden for testing purposes
This can be used for various testing needs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-05 23:53:08 +02:00
Jouni Malinen
163fc3d562 DPP: Indicate to upper layers whether mutual authentication was used
DPP Responder selects whether mutual authentication is used. This commit
adds information about that selection to upper layers (ctrl_iface event
DPP-AUTH-DIRECTION mutual=<0/1>) on the Initiator side.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
34603767b8 DPP: Extend protocol testing to allow exchange termination
This extends dpp_test functionality to allow DPP exchanges to be stopped
when receiving a specified message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-02 12:00:44 +02:00
Jouni Malinen
f0a383a981 DPP: Extend dpp_test with invalid E-Nonce in Config Req
Allow an E-Nonce attribute with invalid length to be sent for protocol
testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 22:01:10 +02:00
Jouni Malinen
55c6c85855 DPP: Extend dpp_test with invalid Transaction ID in Peer Disc Req
Allow a Transaction ID attribute with invalid length to be sent for
protocol testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 21:56:19 +02:00
Krishna Rao
364039d223 Add QCA vendor command and attributes for RROP
Add QCA vendor command and attributes for vendor specific Representative
RF Operating Parameter (RROP) information. This information is intended
for optional use by external ACS. It provides guidance values for some
RF parameters that are used by the system during operation, so that
external ACS can utilize these to compare between channels, bands, etc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 18:47:32 +02:00
Jouni Malinen
f981ce7298 DPP: Do not continue if public key hash derivation fails
sha256_vector() result was ignored apart from printing out the failure
in the debug log. This is not really a normal case and it is better to
reject the full operation rather than try to continue with an incorrect
public key hash value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 00:08:38 +02:00
Jouni Malinen
8a37d54ea7 DPP: Fix memory leak on dpp_auth_build_conf() error paths
The wpabuf for the message needs to be freed on the error paths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 21:21:34 +02:00
Jouni Malinen
622934128b DPP: Fix a memory leak on an error path
Need to free temporary allocations if dpp_build_conf_start() fails to
allocate memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-29 13:03:48 +02:00
Jouni Malinen
82feacced0 DPP: Ignore GAS server status callback for unknown response
It was possible for a timeout from an old GAS server operation to
trigger DPP configuration failure during the subsequent DPP operation.
Fix this by verifying that the status callback is for the response
generated during the same DPP Authentication/Configuration exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 13:48:40 +02:00
Jouni Malinen
a2588be82c DPP: Add DPP_CONFIGURATOR_SIGN support to hostapd
Configurator signing its own Connector was previously supported only in
wpa_supplicant. This commit extends that to hostapd to allow an AP
acting as a Configurator to self-configure itself.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-27 13:24:20 +02:00
Jouni Malinen
73f21929a7 DPP: Auto-generate Initiator bootstrapping info if needed
Instead of using the all-zeros Initiator Bootstrapping Key Hash when no
local bootstrapping key is configuref for the Initiator, automatically
generate a temporary bootstrapping key for the same curve that the
Responder uses. If the Responder indicates that it wants to do mutual
authentication, provide the URI for the auto-generated bootstrapping key
in the DPP-RESPONSE-PENDING event for upper layers to display the QR
Code.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-26 17:41:22 +02:00
Jouni Malinen
acc555f9e6 DPP: Allow PKEX x/X and y/Y keypairs to be overridden
This is for testing purposes to allow a test vector with specific values
to be generated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-24 01:41:50 +02:00
Jouni Malinen
d722c50d0a DPP: Print more interim EC_POINT results into debug log
This makes it easier to debug issues related to DPP/PKEX EC operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-24 01:02:59 +02:00
Jouni Malinen
2bdc47a945 DPP: Allow PKEX own/peer MAC addresses to be overridden
This is for testing purposes to allow a test vector with specific values
to be generated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-23 23:47:52 +02:00
Jouni Malinen
af4103e5e9 DPP: Provide peer_mac to PKEX Initiator through function argument
Avoid unnecessary direct write to a struct dpp_pkex member from outside
dpp.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-23 23:32:33 +02:00
Jouni Malinen
918a2ac40f DPP: Work around missing EVP_PKEY_CTX_set_ec_param_enc()
This allows compilation with older OpenSSL 1.0.1.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-23 20:31:12 +02:00
Jouni Malinen
116454f460 DPP: Fix error return value in dpp_auth_conf_rx()
Commit 03abb6b541 ('DPP: Reject unexpected
Req/Resp message based on Auth/PKEX role') used incorrect type of error
value (NULL vs. -1). Fix that.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-23 20:20:39 +02:00
bhagavathi perumal s
cc79e06f00 hostapd: Add wpa_msg_ctrl() to report Probe Request frames from STA
This allows external applications to get event indication for Probe
Request frames. Extend ctrl iface cmd "ATTACH" to enable this event on
per-request basis. For example, user has to send ctrl iface cmd "ATTACH
probe_rx_events=1" to enable the Probe Request frame events.

Signed-off-by: bhagavathi perumal s <bperumal@qti.qualcomm.com>
2017-11-23 20:12:34 +02:00
Jouni Malinen
248264c622 DPP: Stop Authentication Request attempts if no response after ACK
If unicast Authentication Request frame is used and the peer ACKs such a
frame, but does not reply within the two second limit, there is no need
to continue trying to retransmit the request frames since the peer was
found, but not responsive.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-23 00:22:13 +02:00
Jouni Malinen
e3a5882b3e DPP: Add SAE credential support to Configurator
The new conf={sta,ap}-{sae,psk-sae} parameter values can now be used to
specify that the legacy configuration object is for SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 21:24:08 +02:00
Jouni Malinen
5dd745b738 DPP: Add akm=sae and akm=psk+sae support in Enrollee role
This allows DPP to be used for enrolling credentials for SAE networks in
addition to the legacy PSK (WPA-PSK) case. In addition, enable FT-PSK
and FT-SAE cases automatically.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 21:23:51 +02:00
Jouni Malinen
a444673957 DPP: Protocol testing capability to send invalid I-Nonce in Auth Req
Extend dpp_test to cover one more invalid behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 16:23:42 +02:00
Jouni Malinen
00d2d13db2 DPP: Retry PKEX Exchange Request frame up to five times
Retransmit the PKEX Exchange Request frame if no response from a peer is
received. This makes the exchange more robust since this frame is sent
to a broadcast address and has no link layer retries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 15:54:35 +02:00
Jouni Malinen
4b8de0c929 DPP: Protocol testing for invalid Peer Discovery Req/Resp values
Extend dpp_test to allow more invalid attribute values to be written
into Peer Discovery Request/Response frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 17:15:02 +02:00
Jouni Malinen
f9cf7d03f1 DPP: Protocol testing for invalid Config Attrib Object value
Extend dpp_test to cover a case where Config Attrib Object value is
invalid in Configuration Request frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 14:13:20 +02:00
Jouni Malinen
3f35ec2dc3 DPP: Protocol testing for invalid DPP Status value
Extend dpp_test to cover cases where DPP Status value is invalid in
Authentication Response/Confirm frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 14:13:16 +02:00
Jouni Malinen
9efa531499 DPP: Use helper functions to build Bootstrap Key Hash attributes
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:41:57 +02:00
Jouni Malinen
acdf703d50 DPP: Replace custom undefined attr with DPP Status in after-wrapped data
This has the same impact and is needed for some testing needs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:32:00 +02:00
Jouni Malinen
56f24d1da0 DPP: Use a helper function to build DPP Status attribute
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:27:14 +02:00
Jouni Malinen
65ecce87fd DPP: Protocol testing for writing invalid I/R Bootstrap Key Hash
Extend dpp_test to cover cases where Initiator/Responder Bootstrap Key
Hash value in DPP Authentication frames is invalid (flip one bit).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 11:32:02 +02:00
Jouni Malinen
b6b4226bdd DPP: Protocol testing capability to generate invalid Protocol Key
This extends dpp_test to allow invalid Initiator/Responder Protocol Key
to be written into the Authentication Request/Response frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 00:11:44 +02:00
Jouni Malinen
94619905c8 DPP: Fix dpp_test_gen_invalid_key() with BoringSSL
Unlike OpenSSL, BoringSSL returns an error from
EC_POINT_set_affine_coordinates_GFp() is not on the curve. As such, need
to behave differently here depending on which library is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 17:50:08 +02:00
Jouni Malinen
746c1792ac DPP: Build bootstrapping key DER encoding using custom routine
While the OpenSSL version of i2d_EC_PUBKEY() seemed to be able to use
the POINT_CONVERSION_COMPRESSED setting on the EC key, that did not seem
to work with BoringSSL. Since this is not exactly robust design, replace
use of i2d_EC_PUBKEY() with a custom routine that enforces the DPP rules
on SubjectPublicKeyInfo (compressed format of the public key,
ecPublicKey OID, parameters present and indicating the curve by OID).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 17:50:02 +02:00
Jouni Malinen
f2d27ef94c DPP: Use a helper function to DER encode bootstrapping key
This routine was previously implemented twice using i2d_EC_PUBKEY().
There is no need to duplicate that implementation and especially since
it looks like this implementation needs to be replaced for BoringSSL,
start by using a shared helper function for both locations so that there
is only a single place that uses i2d_EC_PUBKEY() to build the special
DPP bootstrapping key DER encoding.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 12:14:21 +02:00
Jouni Malinen
5548453a2d BoringSSL: Add DPP special cases regardless of claimed version number
It looks like BoringSSL claims to have OPENSSL_VERSION_NUMBER for a
1.1.0 version, but it does not provide ECDSA_SIG_set0() or
ECDSA_SIG_get0(). For now, add the helper functions regardless of the
version BoringSSL claims to be. Similarly, include the X509_ALGOR_get0()
workaround unconditionally for BoringSSL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:44:42 +02:00
Edayilliam Jayadev
af6614ca10 Fix block comment style in QCA vendor attribute definition
Fix the block comment style issue introduced as part of commit
fbfceef3af ("Add QCA vendor commands for
spectral scan").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 18:55:30 +02:00
tinlin
2115603a45 Add QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Add sub-command QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING to flush
pending packets in firmware. The attributes are listed in enum
qca_wlan_vendor_attr_flush_pending. The QCA_WLAN_VENDOR_ATTR_PEER_ADDR
specifies the peer MAC address and the QCA_WLAN_VENDOR_ATTR_AC specifies
the access category of the pending packets.

Signed-off-by: Lin Tingting <tinlin@qti.qualcomm.com>
2017-11-14 18:52:59 +02:00
Zhang Qian
27987b67fa Add new QCA vendor attribute for LL stats
A new vendor attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU
is added for vendor sub-command QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET.
This attribute is for pending MSDUs corresponding to respective AC.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-11-14 18:48:55 +02:00
Masashi Honma
4109555ef7 DPP: Fix compiler warning of testing code
../src/common/dpp.c: In function 'dpp_test_gen_invalid_key':
../src/common/dpp.c:5531:10: warning: return makes integer from pointer without a cast [-Wint-conversion]
   return NULL;
          ^

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-11-14 18:22:58 +02:00
Jouni Malinen
1d624a0702 Reject PMK-to-PTK derivation with unsupported cipher
There should be no wpa_pmk_to_ptk() calls with the cipher argument
indicating a cipher that is not allowed as a pairwise cipher. However,
it looks like that was possible to happen with wlantest. Check for this
corner case explicitly to avoid generating confusing debug logs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 12:50:30 +02:00
Jouni Malinen
762fb4f066 DPP: Testing capability to send unexpected Authentication Response
This is for protocol testing to check what happens if the Responser
receives an unexpected Authentication Response instead of Authentication
Confirm.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:55:56 +02:00
Jouni Malinen
03abb6b541 DPP: Reject unexpected Req/Resp message based on Auth/PKEX role
This prevents issues where an unexpected message in the DPP
Authentication exchange or PKEX could result in undefined behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:55:56 +02:00
Jouni Malinen
95b0104a34 DPP: Retransmit DPP Authentication Response frame if it is not ACKed
This extends wpa_supplicant DPP implementation to retransmit DPP
Authentication Response frame every 10 seconds up to 5 times if the peer
does not reply with DPP Authentication Confirm frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 12:35:26 +02:00
Jouni Malinen
d1f082644c DPP: Allowed initiator to indicate either role
The new role=either parameter can now be used with DPP_AUTH_INIT to
indicate that the initiator can take either the Configurator or Enrollee
role.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 11:45:05 +02:00
Jouni Malinen
f97ace34cb DPP: Support multiple channels for initiating DPP Authentication
This extends wpa_supplicant to iterate over all available channels from
the intersection of what the peer indicates and the local device
supports when initiating DPP Authentication. In addition, retry DPP
Authentication Request frame up to five times if no response is
received.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-13 11:45:05 +02:00
Jouni Malinen
a306ed5a58 DPP: Protocol testing to allow missing attributes in peer discovery
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-06 12:40:18 +02:00
Edayilliam Jayadev
fbfceef3af Add QCA vendor commands for spectral scan
Add the following vendor commands and their vendor attributes for
spectral scan.

 1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
        Get current values of spectral parameters.
 2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
        Get stats for spectral scan debug.
 3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
        Get the spectral hardware capability.
 4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
        Get the current status of spectral scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:47:32 +02:00
Zhang Qian
962b8fcf49 Add new QCA vendor attributes for MAC counters
Add QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME
and QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME to record
timestamp and duration for the last MAC counters. Some user layer
application is delay sensitive. It needs to know time stamp and
measurment duration for the counters.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-11-03 21:21:55 +02:00
Jouni Malinen
af7f10fcdf DPP: Protocol testing for invalid Config Resp attribute values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:14:08 +02:00
Jouni Malinen
8c99e6264a DPP: Report Config Request/Response failure reasons on control interface
This provides more details of failures to upper layer components.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:04:17 +02:00
Jouni Malinen
f411ad1b86 DPP: Protocol testing to remove attributes from Config Req/Resp
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:04:17 +02:00
Jouni Malinen
7e0ebe21b0 DPP: Protocol testing - invalid I/R-Auth value in PKEX Commit-Reveal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 20:18:24 +02:00
Jouni Malinen
89d0bf6783 DPP: Protocol testing - invalid Bootstrap Key value in PKEX Commit-Reveal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00
Jouni Malinen
f31ef96dc3 DPP: Protocol testing - invalid Status value in PKEX Exchange Response
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00
Jouni Malinen
d05c82c4d0 DPP: Move PKEX z derivation on Responder to earlier phase
K and z can be derived already based on information available at the
time the PKEX Exchange Request is being processed, so move these there
from the PKEX Commit-Reveal Request processing since that matches the
DPP tech spec description close and allows PKEX exchange to be aborted
earlier if anything unexpected happens.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00
Jouni Malinen
578c9ea1ab DPP: Fix a typo in a debug print
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00
Jouni Malinen
5f5fff4363 DPP: Explicitly check that PKEX Qr is not the point-at-infinity
This was already done for Qi, but the same needs to be done for Qr as
well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:47 +02:00
Jouni Malinen
29ab69e4b0 DPP: PKEX counter t
Add limit on number of failed attempts that could have used PKEX code.
If the limit (5) is reached, drop the PKEX state (including the code)
and report this on the control interface to indicate that a new code
needs to be entered due to possible attack.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
039b8e7369 DPP: Terminate PKEX exchange on detection of a mismatching code
Clean up the pending PKEX exchange if Commit-Reveal Request processing
indicates a mismatch in the PKEX code. Previously, the this case was
silently ignored and the session was left in pending state that
prevented new PKEX exchanges from getting initated. Now, a new attempt
is allowed to be initiated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
fc0efa2a1e DPP: Use dpp_bn2bin_pad() helper to simplify code
Number of places writing BIGNUM values with left-padding were open
coding this helper functionality unnecessarily.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
e0247e7983 DPP: PKEX and STATUS_BAD_GROUP
Report mismatching finite cyclic group with PKEX Exchange Response using
STATUS_BAD_GROUP and provide more detailed error report over the control
interface on the peer device when this happens.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
2265353a4f DPP: Remove obsolete TODO comment on discovery object
The optional channel information was removed from the discovery object
in the DPP tech spec, so no need to maintain this TODO note anymore.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
1cfcbd32ac DPP: Testing capability to generate invalid PKEX encrypted key (M and N)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
d7e7b7122e DPP: Report PKEX failure reasons over control interface
This provides more information to upper layer software to report failure
reasons on the UI.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 19:59:46 +02:00
Jouni Malinen
61f9f27f80 DPP: Extend protocol testing to cover missing attributes in PKEX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-02 23:53:55 +02:00
Jouni Malinen
b3e4cc5cbb DPP: Move PKEX Commit-Reveal Response building to a helper function
This cleans up dpp_pkex_rx_commit_reveal_req() a bit and makes it easier
to add protocol testing functionality to PKEX exchange similarly to the
previously added DPP Authentication case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-02 21:34:51 +02:00
Jouni Malinen
b0626c2a6b DPP: Move PKEX Commit-Reveal Request building to a helper function
This cleans up dpp_pkex_rx_exchange_resp() a bit and makes it easier to
add protocol testing functionality to PKEX exchange similarly to the
previously added DPP Authentication case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-02 21:34:50 +02:00
Jouni Malinen
a5c3b41b2f DPP: Move PKEX Exchange Response building to a helper function
This cleans up dpp_pkex_rx_exchange_req() a bit and makes it easier to
add protocol testing functionality to PKEX exchange similarly to the
previously added DPP Authentication case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-02 21:34:17 +02:00
Jouni Malinen
60b9dd86fd DPP: Fix couple of typos in debug messages
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-02 21:34:03 +02:00
Jouni Malinen
219d4c9fcb DPP: Report possible PKEX code mismatch in control interface
Indicate to upper layers if PKEX Commit-Reveal Request frame AES-SIV
decryption fails. That is a likely sign of the PKEX code mismatch
between the devices.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-02 12:25:35 +02:00
bhagavathi perumal s
ba72b4b126 hostapd: Add Min/Max Transmit Power Capability into STA command
This provides access to the Minimum/Maximum Transmit Power Capabilitie
fileds (the nominal minimum/maximum transmit power with which the STA
is capable of transmitting in the current channel; signed integer in
units of decibels relative to 1 mW).

Signed-off-by: bhagavathi perumal s <bperumal@qti.qualcomm.com>
2017-10-31 00:22:58 +02:00
Jouni Malinen
d270920692 DPP: Negotiation channel change request from Initiator
Allow the Initiator to request a different channel to be used for DPP
Authentication and DPP Configuration exchanges. This commit adds support
for this in wpa_supplicant with the optional neg_freq=<freq in MHz>
parameter in DPP_AUTH_INIT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-29 16:08:02 +02:00
Jouni Malinen
e85b660129 DPP: Add DPP Status attribute into Peer Discovery Response
This was added in DPP tech spec v0.2.7 to allow result of network
introduction to be reported.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-29 12:16:15 +02:00
Jouni Malinen
19ef4289ca DPP: Process Authentication Confirm failure cases
Process Authentication Confirm with the two failure cases defined in the
spec: STATUS_NOT_COMPATIBLE and STATUS_AUTH_FAILURE. This verifies the
{R-nonce}k2 part and reports more detailed failure reason if the message
is valid.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-28 17:44:14 +03:00
Jouni Malinen
7d917ab048 DPP: Send Authentication Confirm failure reports
If Authentication Response processing fails due to R-capab
incompatibility or R-auth mismatch, send Authentication Confirm with
error status.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-28 17:44:14 +03:00
Jouni Malinen
978bc3f2af DPP: Auth Resp/Conf incorrect attribute values for protocol testing
This extends the dpp_test mechanism to allow I-nonce, R-capab, R-auth,
and I-auth values in Authentication Response/Confirm to use incorrect
values.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-28 17:44:10 +03:00
Jouni Malinen
9b51112031 DPP: Allow Responder to decide not to use mutual authentication
Previously, Initiator decided whether to use mutual authentication on
its own based on having own and peer bootstrapping info. This prevented
Responder from selecting not to use mutual authentication in such a
case. Fix this by allowed Initiator to fall back to non-mutual
authentication based on Responder choice if the bootstrapping mechanism
allows this (PKEX does not; it mandates use of mutual authentication).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-27 16:09:51 +03:00
Jouni Malinen
dcdaeab79c DPP: Report Auth Conf failures in control interface
This is useful for protocol testing purposes and UI needs to display
more detailed information about DPP exchanges.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-27 16:09:51 +03:00
Jouni Malinen
f9c7d77029 DPP: Omission of Auth Conf attributes for protocol testing
This extends the dpp_test mechanism to allow each of the required
attributes in Authentication Confirm to be omitted.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-27 16:09:51 +03:00
Jouni Malinen
26806abe85 DPP: Report invalid messages and failure conditions in control interface
This is useful for protocol testing purposes and UI needs to display
more detailed information about DPP exchanges.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 22:45:17 +03:00
Jouni Malinen
ce9acce006 DPP: Omission of Auth Resp attributes for protocol testing
This extends the dpp_test mechanism to allow each of the required
attributes in Authentication Response to be omitted.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 22:38:59 +03:00
Jouni Malinen
a03406dbe2 DPP: Move Authentication Response building into a separate function
This cleans up old dpp_auth_build_resp() (now dpp_auth_build_resp_ok())
a bit by separating initialization steps for a DPP authentication
session from the code needed to build the frame. This allows
dpp_auth_build_resp_status() to share the helper function instead of
having to maintain a duplicated message construction implementation. In
addition, this makes it easier to remove some of the attributes for
protocol testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 19:05:06 +03:00
Jouni Malinen
0e7cb8c6c1 DPP: Omission of Auth Req attributes for protocol testing
This extends the dpp_test mechanism to allow each of the required
attributes in Authentication Request to be omitted.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 18:27:53 +03:00
Jouni Malinen
606a8e8d57 DPP: Move Authentication Request building into a separate function
This cleans up dpp_auth_init() a bit by separating initialization steps
for a DPP authentication session from the code needed to build the
frame. In addition, this makes it easier to remove some of the
attributes for protocol testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 18:25:30 +03:00
Jouni Malinen
3749ad0e1d DPP: Explicitly check and reject 0x00 and 0x03 I/R-capab role
0x00 and 0x03 are not valid I/R-capabilities role values.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 17:21:57 +03:00
Jouni Malinen
af48810ba3 DPP: Report transmitted messages as control interface events
This is helpful for testing purposes and also for upper layer components
that may want to show more detailed progress through a DPP exchange.
Both the DPP-TX and DPP-TX-STATUS events are provided.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 17:21:57 +03:00
Jouni Malinen
a707393494 DPP: Report received messages as control interface events
This is helpful for testing purposes and also for upper layer components
that may want to show more detailed progress through a DPP exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 17:21:57 +03:00
Jouni Malinen
27fefbbb76 DPP: Remove unnecessary Wrapped Data checks from callers
Now that dpp_check_attrs() takes care of verifying that no attributes
are after the Wrapped Data attribute, the duplicated checks in hostapd
and wpa_supplicant side of the implementation can be removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 17:21:57 +03:00
Jouni Malinen
0c881807b5 DPP: Verify that Wrapped Data attribute is the last one in the message
Do not allow any additional attributes to be included after the Wrapped
Data attribute.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 17:21:57 +03:00
Jouni Malinen
60239f60a6 DPP: Protocol testing framework
Add a generic mechanism for configuring the DPP implementation to behave
in particular different (mostly incorrect) ways for protocol testing
purposes. The new dpp_test parameter can be set to a non-zero integer to
indicate a specific behavior. This is only available in
CONFIG_TESTING_OPTIONS=y builds.

This commit include cases for an extra attribute being added after the
Wrapped Data attribute and Initiator/Responder capabilities having an
unexpected zero capability.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-22 17:21:57 +03:00
Michael Baird
5f7c9e50f5 EAP server: Add event messages for more EAP states
While using an external RADIUS server SUCCESS messages were not being
sent (internal was fine). Also add event messages for other states that
others might find useful, and consistency between the two.

Signed-off-by: Michael Baird <Michael.Baird@ecs.vuw.ac.nz>
2017-10-21 20:28:46 +03:00
Jouni Malinen
4be5bc98a8 DPP: Update AES-SIV AD for PKEX frames
The protocol design was updated to protect the six octets in the header
before the attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-19 18:32:16 +03:00
Jouni Malinen
dc4d271c6d DPP: Update AES-SIV AD for DPP Authentication frames
The protocol design was updated to protect the six octets in the header
before the attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-18 22:51:30 +03:00
Vidyullatha Kanchanapally
cddfda7892 Add attributes to support roam+auth vendor event for FILS
Add additional attributes to specify the PMK, PMKID, and the ERP next
sequence number to the vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH. These are needed in case
of an offloaded FILS roaming.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 15:55:44 +03:00
Jouni Malinen
a6ea665300 Additional consistentcy checks for PTK component lengths
Verify that TK, KCK, and KEK lengths are set to consistent values within
struct wpa_ptk before using them in supplicant. This is an additional
layer of protection against unexpected states.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-17 00:07:17 +03:00
Jouni Malinen
b488a12948 Clear PMK length and check for this when deriving PTK
Instead of setting the default PMK length for the cleared PMK, set the
length to 0 and explicitly check for this when deriving PTK to avoid
unexpected key derivation with an all-zeroes key should it be possible
to somehow trigger PTK derivation to happen before PMK derivation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00
Jouni Malinen
a0bf1b68c0 Remove all PeerKey functionality
This was originally added to allow the IEEE 802.11 protocol to be
tested, but there are no known fully functional implementations based on
this nor any known deployments of PeerKey functionality. Furthermore,
PeerKey design in the IEEE Std 802.11-2016 standard has already been
marked as obsolete for DLS and it is being considered for complete
removal in REVmd.

This implementation did not really work, so it could not have been used
in practice. For example, key configuration was using incorrect
algorithm values (WPA_CIPHER_* instead of WPA_ALG_*) which resulted in
mapping to an invalid WPA_ALG_* value for the actual driver operation.
As such, the derived key could not have been successfully set for the
link.

Since there are bugs in this implementation and there does not seem to
be any future for the PeerKey design with DLS (TDLS being the future for
DLS), the best approach is to simply delete all this code to simplify
the EAPOL-Key handling design and to get rid of any potential issues if
these code paths were accidentially reachable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00
Mathy Vanhoef
53bb18cc8b Prevent installation of an all-zero TK
Properly track whether a PTK has already been installed to the driver
and the TK part cleared from memory. This prevents an attacker from
trying to trick the client into installing an all-zero TK.

This fixes the earlier fix in commit
ad00d64e7d ('Fix TK configuration to the
driver in EAPOL-Key 3/4 retry case') which did not take into account
possibility of an extra message 1/4 showing up between retries of
message 3/4.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2017-10-16 02:03:47 +03:00
Mathy Vanhoef
cb5132bb35 Prevent reinstallation of an already in-use group key
Track the current GTK and IGTK that is in use and when receiving a
(possibly retransmitted) Group Message 1 or WNM-Sleep Mode Response, do
not install the given key if it is already in use. This prevents an
attacker from trying to trick the client into resetting or lowering the
sequence counter associated to the group key.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2017-10-16 02:03:47 +03:00
Jouni Malinen
58efbcbcd4 DPP: Fix static analyzer warnings in key generation and JWK construction
Memory allocation failures could have resulted in error paths that
dereference a NULL pointer or double-freeing memory. Fix this by
explicitly clearing the freed pointer and checking allocation results.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-11 18:19:03 +03:00
Jouni Malinen
265bda3444 OWE: Allow DH Parameters element to be overridden for testing purposes
This allows CONFIG_TESTING_OPTIONS=y builds of wpa_supplicant to
override the OWE DH Parameters element in (Re)Association Request frames
with arbitrary data specified with the "VENDOR_ELEM_ADD 13 <IE>"
command. This is only for testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 18:26:29 +03:00
Jouni Malinen
8c19ea3f21 DPP: Add the crypto suite field to the frames
This additional field was added to DPP Public Action frames in DPP tech
spec v0.2.3 to support cryptographic agility in the future.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 01:30:08 +03:00
Jouni Malinen
c77e2ff096 DPP: Remove C-sign-key expiry
This was removed in DPP tech spec v0.2.3.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 01:17:33 +03:00
Jouni Malinen
6254045a51 DPP: Explicitly delete the PKEX secret element K upon generation of z
This was added as an explicit requirement in DPP tech spec 0.2.3.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 00:56:21 +03:00
Jouni Malinen
0e6709a4ea DPP: Rename PKEX secret element from Z to K
This matches the change in the DPP tech spec to make this less likely to
be confused with the shared secret z.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 00:52:35 +03:00
Jouni Malinen
6573171792 DPP: Verify that PKEX Qi is not the point-at-infinity
This was added as an explicit requirement in DPP tech spec v0.2.3.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-10 00:42:34 +03:00
Jouni Malinen
8b5579e17a DPP: Fix EAPOL-Key Key MIC calculation
The Key MIC field value got truncated for all cases and incorrect HMAC
hash algorithm was used for the SHA512 cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-08 17:12:35 +03:00
Jouni Malinen
6c4726189c OWE: Extend shared helper functions to support other DH curves
This extends the helper functions for determining OWE key lengths and
Key MIC values to support other DH curves beyond the mandatory group 19.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-08 17:12:35 +03:00
Jouni Malinen
ea079153f4 OWE: Add AP support for transition mode
The new owe_transition_bssid and owe_transition_ssid parameters can be
used to configure hostapd to advertise the OWE Transition Mode element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-08 17:12:35 +03:00
Peng Xu
4a37463416 hostapd: Update HE capabilities and HE operation definition
Replace vendor-specific elements for HE capabilities and HE operation
elements with the P802.11ax defined element values. This version is
based on P802.11ax/D1.4.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-05 15:09:43 +03:00
Krishna Rao
ee522d27cf Vendor flags for 11ax channel property flags for use with external ACS
Add 802.11ax channel property flags for use with external ACS (QCA
vendor command). Use the remaining available bits in
qca_wlan_vendor_channel_prop_flags for the first few 11ax flags. Then
add qca_wlan_vendor_channel_prop_flags_2 as a continuation of
qca_wlan_vendor_channel_prop_flags and add the remaining 11ax flags
there. Note that qca_wlan_vendor_channel_prop_flags_ext is not used
since it is currently not intended for holding such information. Rather
it is meant for holding additional control information related to
features such as DFS, CSA, etc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-26 18:00:47 +03:00
Jouni Malinen
61a56c1480 Add group_mgmt network parameter for PMF cipher selection
The new wpa_supplicant network parameter group_mgmt can be used to
specify which group management ciphers (AES-128-CMAC, BIP-GMAC-128,
BIP-GMAC-256, BIP-CMAC-256) are allowed for the network. If not
specified, the current behavior is maintained (i.e., follow what the AP
advertises). The parameter can list multiple space separate ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-26 17:40:02 +03:00
Vamsi Krishna
d55b174609 FILS: Vendor attribute to disable driver FILS features
The FILS features on STA needs to be disabled for testing purposes to
verify the APUT behavior with non-FILS STAs. Add a QCA vendor attribute
for doing so.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-25 20:22:46 +03:00
Jouni Malinen
039ab15fdf DPP: Add DPP-CONFOBJ-PASS/PSK events for hostapd legacy configuration
These control interface event messages can be used to allow hostapd AP
to be configured for legacy WPA2-Personal configuration with DPP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-15 17:45:06 +03:00
Jouni Malinen
4cada9dcc1 FILS: Add DHss into FILS-Key-Data derivation when using FILS SK+PFS
This part is missing from IEEE Std 802.11ai-2016, but the lack of DHss
here means there would not be proper PFS for the case where PMKSA
caching is used with FILS SK+PFS authentication. This was not really the
intent of the FILS design and that issue was fixed during REVmd work
with the changes proposed in
https://mentor.ieee.org/802.11/dcn/17/11-17-0906-04-000m-fils-fixes.docx
that add DHss into FILS-Key-Data (and PTK, in practice) derivation for
the PMKSA caching case so that a unique ICK, KEK, and TK are derived
even when using the same PMK.

Note: This is not backwards compatible, i.e., this breaks PMKSA caching
with FILS SK+PFS if only STA or AP side implementation is updated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-13 22:17:58 +03:00
Jouni Malinen
41b8191485 FILS: Update PMKID derivation rules for ERP key hierarchy establishment
IEEE Std 802.11ai-2016 had missed a change in the Pairwise key hierarchy
clause (12.7.1.3 in IEEE Std 802.11-2016) and due to that, the previous
implementation ended up using HMAC-SHA-1 -based PMKID derivation. This
was not really the intent of the FILS design and that issue was fixed
during REVmd work with the changes proposed in
https://mentor.ieee.org/802.11/dcn/17/11-17-0906-04-000m-fils-fixes.docx
that change FILS cases to use HMAC-SHA-256 and HMAC-SHA-384 based on the
negotiated AKM.

Update the implementation to match the new design. This changes the
rsn_pmkid() function to take in the more generic AKMP identifier instead
of a boolean identifying whether SHA256 is used.

Note: This is not backwards compatible, i.e., this breaks PMKSA caching
based on the initial ERP key hierarchy setup if only STA or AP side
implementation is updated. PMKSA caching based on FILS authentication
exchange is not impacted by this, though.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-13 22:17:58 +03:00
Jouni Malinen
c2d4f2eb5d DPP: Derive PMKID using SHA256() for all curves
This was previously defined inconsistently (H() vs. SHA256()), but it is
now clarified in the draft tech spec to use SHA256(), so update
implementation to do that.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-24 23:59:44 +03:00
Jouni Malinen
85fd8263a5 DPP: Use Transaction ID in Peer Discovery Request/Response frames
DPP tech spec changed the contents of these frames by replacing the
public key hash attributes with a Transaction ID attribute that gets
copied from the request to the response to identify the transaction in a
simpler manner.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-23 12:51:41 +03:00
Sunil Dutt
cf39475b40 Introduce QCA_NL80211_VENDOR_SUBCMD_HANG
This is an event indicating to the user space that the driver has
detected an internal failure. The driver is expected to recover from
such a failure automatically, e.g., by resetting the device. This event
carries the information indicating the reason that triggered this
detection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-23 11:32:07 +03:00
Jouni Malinen
a4bf007877 DPP: Remove devices object from the connector
This was removed from the draft DPP tech spec, so remove it from the
implementation as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-22 23:46:27 +03:00
Sachin Ahuja
e77d13ef95 QCA vendor attribute to configure beacon miss penalize count for BTC
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-18 21:10:53 +03:00
Sachin Ahuja
7bd88aaf37 QCA vendor attribute to configure beacon miss count
This can be used to dynamically enable/disable beacon miss count.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-18 21:10:53 +03:00
Sandeep Puligilla
505554bbf7 QCA vendor attribute to enable/disable scan
This commit introduces QCA vendor attribute to
disable/enable scan.

Signed-off-by: Sandeep Puligilla <spuligil@qti.qualcomm.com>
2017-08-18 21:10:53 +03:00
Sven Eckelmann
b0fc2ef3a3 hw_features: Fix check of supported 802.11ac channel width
The two channel width bits in the VHT capability field can be decoded in
following values (IEEE Std 802.11ac-2013 8.4.2.160.2 VHT Capabilities
Info field):

 * 0: no 160 or 80+80 MHz support
 * 1: 160 MHz support
 * 2: 160 and 80+80 MHz support
 * 3: (reserved)

The check must therefore not be done bitwise but instead it must checked
whether the capabilities announced by the driver are at least the ones
requested by the user.

Fixes: c781eb8428 ("hostapd: Verify VHT capabilities are supported by driver")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2017-07-18 13:39:46 +03:00
Jouni Malinen
809c675029 DPP: Fix build with OpenSSL 1.1.0
X509_ALGOR_get0() was modified to use const ** pointer as the first
argument in OpenSSL 1.1.0, so need to use different type here to avoid
compilation issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-07-17 12:26:44 +03:00
Ashwini Patil
65833d71a5 OCE: Add hostapd mode OCE capability indication if enabled
Add OCE IE in Beacon, Probe Response, and (Re)Association Response
frames if OCE is enabled in the configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:27:00 +03:00
Ashwini Patil
332aadb8a2 STA: Add OCE capability indication attribute
Add OCE capability indication attribute in Probe Request and
(Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:19:53 +03:00
vamsi krishna
46b15e470e Add vendor flags for OCE feature support indication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:11:35 +03:00
Sunil Dutt
9f44f7f3b5 Introduce a vendor attribute to represent the PNO/EPNO Request ID
This request ID was wrongly referred from the REQUEST_ID in
enum qca_wlan_vendor_attr_gscan_config_params which is mapped to
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM in PNO Config.
Hence define a different attribute to represent the request ID
for PNO Config.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:11:35 +03:00
Andrei Otcheretianski
bfbc41eace DPP: Fix compilation without openssl
dpp.h file requires openssl in order to compile, which breaks
compilation on systems without it.
Move DPP_OUI_TYPE to ieee802_11_defs.h and don't include dpp.h when
not really needed.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2017-07-07 23:37:45 +03:00
Jouni Malinen
5579c11c3e Fix a typo in vendor attribute documentation
The attribute is QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE, not
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-07 13:26:45 +03:00
Ashwini Patil
f2cdb41b81 OCE: Define OCE attributes and other related macros
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-05 02:02:35 +03:00
Jouni Malinen
f522bb2377 DPP: Add DPP_CONFIGURATOR_SIGN to generate own connector
The DPP Configurator can use this new command to generate its own signed
connector for the network that it manages.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-04 17:48:44 +03:00
Jouni Malinen
484788b875 DPP: Share bootstrap type to string helper function
This can be used in hostapd as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-04 15:45:03 +03:00
Jouni Malinen
8885023252 Add new key_mgmt values for wpa_supplicant STATUS command
Recently added OWE and DPP were missing from the key_mgmt string list.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-03 14:33:16 +03:00
Jouni Malinen
3a5954ef98 Add mgmt_group_cipher to wpa_supplicant STATUS command
This can be used to check which management group cipher is used in an
association that uses PMF.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-03 14:28:24 +03:00
Jouni Malinen
787615b381 DPP: Set PMKSA expiration based on peer connector
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-03 13:29:59 +03:00
Jouni Malinen
6095b47905 DPP: Check JWS protected header alg against C-sign-key curve
These need to be compatible for the JWS protected header signing to be
valid, so add an explicit check to confirm this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-03 13:03:34 +03:00
Jouni Malinen
31f03cb009 DPP: Update JWS algorithm strings for Brainpool curves
Instead of trying to share the existing definitions for NIST curves,
start using unique strings for Brainpool curves.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 21:13:15 +03:00
Jouni Malinen
e0d3d3fceb DPP: Rename Brainpool curve names for JSON
This removes the "R1" postfix from the names used in JSON.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 09:35:00 +03:00
Jouni Malinen
500ed7f006 DPP: PKEX bootstrapping
This implements genric PKEX functionality in src/common/dpp.c and glue
code to use this in wpa_supplicant (i.e, hostapd DPP implementation does
not yet support PKEX).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 09:35:00 +03:00
Jouni Malinen
b9d47b4848 DPP: Add helper functions for running hash operations
Use helper functions to cover all three different hash algorithm options
for DPP operations instead of having separate calls to each function at
every location a hash operation based on the curve is needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 09:35:00 +03:00
Jouni Malinen
43fbb8db5b DPP: More debug for own connector configuration errors
This makes it easier to notice a reason for failure in cases a connector
string has been truncated.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 09:35:00 +03:00
Jouni Malinen
f1f4fa7972 DPP: Fix JWK debug prints
This function is used for parsing both the C-sign-key and netAccessKey,
so better not imply that all cases are C-sign-key in the debug prints.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-02 09:35:00 +03:00
Sunil Dutt
528b655788 Add Set Wi-Fi Configuration vendor attribute to configure LRO
This can be used to dynamically enable/disable LRO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-23 19:25:46 +03:00
Sunil Dutt
944f359e19 Introduce a vendor command to specify the active Type Of Service
This commit introduces QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS to specify
the active Type Of Service on the specific interface. This can be used
to modify some of the low level scan parameters (off channel dwell time,
home channel time) in the driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-23 19:23:38 +03:00
Jouni Malinen
8528994e21 DPP: Automatic network profile creation
wpa_supplicant can now be configured to generate a network profile
automatically based on DPP configuration. The following
dpp_config_processing values can be used to specify the behavior:
0 = report received configuration to an external program for
    processing; do not generate any network profile internally (default)
1 = report received configuration to an external program and generate
    a network profile internally, but do not automatically connect
    to the created (disabled) profile; the network profile id is
    reported to external programs
2 = report received configuration to an external program, generate
    a network profile internally, try to connect to the created
    profile automatically

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-21 18:03:34 +03:00
Jouni Malinen
a0d5c56f8b DPP: Network Introduction protocol for wpa_supplicant
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:59 +03:00
Jouni Malinen
650a70a72a DPP: Network Introduction protocol
This commit adds generic helper functions for going through Network
Introduction protocol.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:59 +03:00
Jouni Malinen
567da5bbd0 DPP: Add new AKM
This new AKM is used with DPP when using the signed Connector to derive
a PMK. Since the KCK, KEK, and MIC lengths are variable within a single
AKM, this needs number of additional changes to get the PMK length
delivered to places that need to figure out the lengths of the PTK
components.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:17 +03:00
Jouni Malinen
461d39af40 DPP: Configuration exchange
This adds support for DPP Configuration Protocol using GAS. Full
generation and processing of the configuration object is not included in
this commit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:15 +03:00
Jouni Malinen
30d27b048e DPP: Authentication exchange
Add wpa_supplicant control interface commands for managing DPP
Authentication exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:12:30 +03:00
Jouni Malinen
be27e185b7 DPP: Bootstrap information management
Add wpa_supplicant control interface commands for parsing the bootstrap
info URI from a QR Code (get peer public key) and to generate a new
bootstrap info with private key for local use. The optional
key=<hexdump> argument to the DPP_BOOTSTRAP_GEN command can be used to
specify the bootstrapping private key in OpenSSL ECPrivateKey DER
encoding format. This results in the local bootstrapping information
entry being created with the specified key instead of generating a new
random one.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 12:03:30 +03:00
Sunil Dutt
9ddba3a309 Rename vendor attribute DISABLE_OFFCHANNEL to RESTRICT_OFFCHANNEL
This commit renames the vendor attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_OFFCHANNEL to
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL as intended by the
original commit d506c35efc ('Set Wi-Fi
Configuration attribute to restrict offchannel operations').

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-26 13:18:06 +03:00
Sunil Dutt
d506c35efc Set Wi-Fi Configuration attribute to restrict offchannel operations
This commit defines an attribute to
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION -
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL which can be used to
restrict offchannel operations on the AP/GO interface.

The goal is to restrict any operations which would cause the AP/GO to
leave its operating channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-23 00:10:01 +03:00
Vidyullatha Kanchanapally
e8e430fe7a Vendor attributes to retain connection on a roam request failure
This commit introduces the following two attributes to
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH events:

QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS - Indicates the status of
	re-association requested by user space
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION - Indicates whether
	the old association was maintained when a re-association
	is requested by user space and that re-association attempt
	fails (i.e., cannot connect to the requested BSS, but can
	remain associated with the BSS with which the association was
	in place when being requested to roam).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-12 00:39:00 +03:00
Sunil Dutt
33117656e6 Define a QCA vendor attribute to update the listen interval
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL which allows the currently
used listen interval to be updated using
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION. This update applies
only during the association and is done without updating the AP about
the change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-10 23:58:46 +03:00
Jouni Malinen
1f3c49d418 Fix 160 MHz opclass channel to frequency conversion
This needs to allow all 20 MHz channel numbers to be converted even
though the Annex E table lists only channel _center_ frequencies 50 and
114. Neighbor Report (see IEEE Std 802.11-2016, 9.4.2.37 Neighbor Report
element) uses Channel Number field with "last known primary channel of
the AP" which refers to the 20 MHz channel and not the channel center
frequency.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-07 22:08:43 +03:00
Jouni Malinen
215eaa748b FILS: Implement FILS-FT derivation
This extends fils_pmk_to_ptk() to allow FILS-FT to be derived. The
callers do not yet use that capability; i.e., actual use will be added
in separate commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-05-07 17:04:29 +03:00
Jouni Malinen
4d0a61c501 FILS: Debug print inputs to Key-Auth derivation
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-05-07 17:04:29 +03:00
Vidyullatha Kanchanapally
da6a28ba60 FILS: Specify if FILS HLP was sent in connect
This adds a string "FILS_HLP_SENT" to connect event when HLP is sent
as part of ASSOC/CONNECT request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-29 16:35:23 +03:00
Sunil Dutt
8befe8a993 Define a QCA attribute to specify the PCL policy for external ACS
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to signify the preferred
channel list policy for external ACS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-20 22:49:08 +03:00
Peng Xu
16217e13d8 QCA vendor commands and attributes for spectral scan
Add new vendor commands for starting and stoppping spectral scan. Add
vendor attributes for configuring spectral scan parameters as part of
the start command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-06 17:34:13 +03:00
Zhaoyang Liu
1275958873 QCA vendor command: Add TA max duration attribute for OCB configure
Add attribute for TA max duration after last TA received. So that local
time is synchromous to other communicating OCB STAs. If the duration
expires, OCB STA without UTC time source is not in sync to other STAs
and stop scheduling DSRC channel switch after max duration.

Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
Signed-off-by: Ferry Zhou <tianguiz@codeaurora.org>
2017-03-27 17:19:38 +03:00
Zhaoyang Liu
2a9ec7c69c Define attributes for QCA vendor OCB commands
Document QCA vendor OCB commands about IEEE Std 802.11 communication
outside the context of a basic service set. Also define all attributes
for the specific OCB commands.

Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
Signed-off-by: Ferry Zhou <tianguiz@codeaurora.org>
2017-03-27 17:17:03 +03:00
Jouni Malinen
a5269dc209 wpa_helpers: Ignore link-local IPv4 address while waiting for DHCP
Do not accept a link-local IPv4 address when waiting for a valid DHCP
address. This helps with hs20-osu-client use cases where DHCP response
has not yet been received.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-26 21:13:21 +03:00
lifeng
6c2056abe5 QCA vendor attributes to extend antenna diversity functionality
1. Add new attribute to report corresponding antenna information to the
chain RSSI which is used in subcmd
QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI.

2. Add a series of attr to support the new wmi interface
WMI_PDEV_PARAM_ANT_DIV_USRCFG which export parameters setting of antenna
diversity algorithm to userspace.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2017-03-15 21:30:00 +02:00
Zhang Qian
b4ae5f04dc Add vendor attribute to config propagation delay's absolute value
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY is added to set
propagation delay's absolute value. This is a more detailed version of
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-03-15 21:24:25 +02:00
Dmitry Shmidt
7f5f4e46ac Fix QCA_ATTR_NUD_STATS_IS_DAD value
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2017-03-14 21:11:18 +02:00
Jouni Malinen
cad291d671 FILS: Define authentication algorithm for FILS SK auth with PFS
This is needed to add PFS support into hostapd and wpa_supplicant FILS
shared key authentication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 22:39:38 +02:00
Jouni Malinen
07a5fe823e OWE: Use AKM 00-0F-AC:11 style parameters for EAPOL-Key frames
draft-harkins-owe-07.txt does not specify these parameters, so need to
pick something sensible to use for the experimental implementation. The
Suite B 128-bit level AKM 00-0F-AC:11 has reasonable parameters for the
DH group 19 case (i.e., SHA256 hash), so use it for now. This can be
updated if the OWE RFC becomes clearer on the appropriate parameters
(KEK/KCK/MIC length, PRF/KDF algorithm, and key-wrap algorithm).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 20:43:06 +02:00
Jouni Malinen
ef9627cbc7 Print the algorithms used for EAPOL-Key professing in log
This makes it easier to debug crypto algorithm selection for 4-way
handshake related functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 20:43:06 +02:00
Jouni Malinen
09368515d1 OWE: Process Diffie-Hellman Parameter element in AP mode
This adds AP side processing for OWE Diffie-Hellman Parameter element in
(Re)Association Request frame and adding it in (Re)Association Response
frame.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 19:24:11 +02:00
Jouni Malinen
a1ea1b4522 OWE: Define and parse OWE AKM selector
This adds a new RSN AKM "OWE".

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 19:24:11 +02:00
Jouni Malinen
9c7aac738b OWE: Define and parse Diffie-Hellman Parameter element
Add WLAN_EID_EXT_OWE_DH_PARAM definition and extend
ieee802_11_parse_elems() to recognize this element.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 00:23:36 +02:00
Avraham Stern
e044a9d1e0 common: Add candidate list parsing helper function
Add a helper function that parses candidate list from command line
arguments.

This function will be used (in the following commits) to add
a candidate list to BSS transition management query.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-11 10:36:15 +02:00
Jouni Malinen
34f2851902 MBO: Parse MBO ANQP-element on STA
This extends the GAS/ANQP parser in wpa_supplicant to process MBO
ANQP-elements and indicate received Cellular Data Connection Preference
values over the control interface.

When a valid MBO ANQP-element is received, the following control
interface message is sent:

RX-MBO-ANQP <BSSID> cell_conn_pref=<value>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-10 18:57:12 +02:00
Avraham Stern
2316cb358c MBO: Add option to add MBO query list to ANQP query
MBO techspec v0.0_r27 changed the MBO ANQP-element format. The MBO
element in ANQP query should now include an MBO Query List element that
contains a list of MBO elements to query.

Add API to add the MBO Query List to an ANQP query.

Format:
ANQP_GET <addr> <info_id>[,<info_id>]...[,mbo:<subtype>...]

Example for querying neighbor report with MBO cellular data
connection preference:
ANQP_GET <bssid> 272,mbo:2

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-10 16:53:10 +02:00