Commit graph

1051 commits

Author SHA1 Message Date
Vidyullatha Kanchanapally
da6a28ba60 FILS: Specify if FILS HLP was sent in connect
This adds a string "FILS_HLP_SENT" to connect event when HLP is sent
as part of ASSOC/CONNECT request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-29 16:35:23 +03:00
Sunil Dutt
8befe8a993 Define a QCA attribute to specify the PCL policy for external ACS
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to signify the preferred
channel list policy for external ACS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-20 22:49:08 +03:00
Peng Xu
16217e13d8 QCA vendor commands and attributes for spectral scan
Add new vendor commands for starting and stoppping spectral scan. Add
vendor attributes for configuring spectral scan parameters as part of
the start command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-06 17:34:13 +03:00
Zhaoyang Liu
1275958873 QCA vendor command: Add TA max duration attribute for OCB configure
Add attribute for TA max duration after last TA received. So that local
time is synchromous to other communicating OCB STAs. If the duration
expires, OCB STA without UTC time source is not in sync to other STAs
and stop scheduling DSRC channel switch after max duration.

Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
Signed-off-by: Ferry Zhou <tianguiz@codeaurora.org>
2017-03-27 17:19:38 +03:00
Zhaoyang Liu
2a9ec7c69c Define attributes for QCA vendor OCB commands
Document QCA vendor OCB commands about IEEE Std 802.11 communication
outside the context of a basic service set. Also define all attributes
for the specific OCB commands.

Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
Signed-off-by: Ferry Zhou <tianguiz@codeaurora.org>
2017-03-27 17:17:03 +03:00
Jouni Malinen
a5269dc209 wpa_helpers: Ignore link-local IPv4 address while waiting for DHCP
Do not accept a link-local IPv4 address when waiting for a valid DHCP
address. This helps with hs20-osu-client use cases where DHCP response
has not yet been received.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-26 21:13:21 +03:00
lifeng
6c2056abe5 QCA vendor attributes to extend antenna diversity functionality
1. Add new attribute to report corresponding antenna information to the
chain RSSI which is used in subcmd
QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI.

2. Add a series of attr to support the new wmi interface
WMI_PDEV_PARAM_ANT_DIV_USRCFG which export parameters setting of antenna
diversity algorithm to userspace.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2017-03-15 21:30:00 +02:00
Zhang Qian
b4ae5f04dc Add vendor attribute to config propagation delay's absolute value
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY is added to set
propagation delay's absolute value. This is a more detailed version of
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-03-15 21:24:25 +02:00
Dmitry Shmidt
7f5f4e46ac Fix QCA_ATTR_NUD_STATS_IS_DAD value
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2017-03-14 21:11:18 +02:00
Jouni Malinen
cad291d671 FILS: Define authentication algorithm for FILS SK auth with PFS
This is needed to add PFS support into hostapd and wpa_supplicant FILS
shared key authentication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 22:39:38 +02:00
Jouni Malinen
07a5fe823e OWE: Use AKM 00-0F-AC:11 style parameters for EAPOL-Key frames
draft-harkins-owe-07.txt does not specify these parameters, so need to
pick something sensible to use for the experimental implementation. The
Suite B 128-bit level AKM 00-0F-AC:11 has reasonable parameters for the
DH group 19 case (i.e., SHA256 hash), so use it for now. This can be
updated if the OWE RFC becomes clearer on the appropriate parameters
(KEK/KCK/MIC length, PRF/KDF algorithm, and key-wrap algorithm).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 20:43:06 +02:00
Jouni Malinen
ef9627cbc7 Print the algorithms used for EAPOL-Key professing in log
This makes it easier to debug crypto algorithm selection for 4-way
handshake related functions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 20:43:06 +02:00
Jouni Malinen
09368515d1 OWE: Process Diffie-Hellman Parameter element in AP mode
This adds AP side processing for OWE Diffie-Hellman Parameter element in
(Re)Association Request frame and adding it in (Re)Association Response
frame.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 19:24:11 +02:00
Jouni Malinen
a1ea1b4522 OWE: Define and parse OWE AKM selector
This adds a new RSN AKM "OWE".

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 19:24:11 +02:00
Jouni Malinen
9c7aac738b OWE: Define and parse Diffie-Hellman Parameter element
Add WLAN_EID_EXT_OWE_DH_PARAM definition and extend
ieee802_11_parse_elems() to recognize this element.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 00:23:36 +02:00
Avraham Stern
e044a9d1e0 common: Add candidate list parsing helper function
Add a helper function that parses candidate list from command line
arguments.

This function will be used (in the following commits) to add
a candidate list to BSS transition management query.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-11 10:36:15 +02:00
Jouni Malinen
34f2851902 MBO: Parse MBO ANQP-element on STA
This extends the GAS/ANQP parser in wpa_supplicant to process MBO
ANQP-elements and indicate received Cellular Data Connection Preference
values over the control interface.

When a valid MBO ANQP-element is received, the following control
interface message is sent:

RX-MBO-ANQP <BSSID> cell_conn_pref=<value>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-10 18:57:12 +02:00
Avraham Stern
2316cb358c MBO: Add option to add MBO query list to ANQP query
MBO techspec v0.0_r27 changed the MBO ANQP-element format. The MBO
element in ANQP query should now include an MBO Query List element that
contains a list of MBO elements to query.

Add API to add the MBO Query List to an ANQP query.

Format:
ANQP_GET <addr> <info_id>[,<info_id>]...[,mbo:<subtype>...]

Example for querying neighbor report with MBO cellular data
connection preference:
ANQP_GET <bssid> 272,mbo:2

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-10 16:53:10 +02:00
Vasanthakumar Thiagarajan
7cbb5f1a44 DFS: Handle pre-CAC expired event
As FCC DFS requirement does not explicitly mention about the validity of
the (pre-)CAC when channel is switched, it is safe to assume that the
pre-CAC result will not be valid once the CAC completed channel is
switched or radar detection is not active on the (CAC completed) channel
within a time period which is allowed (10 seconds - channel switch time)
as per FCC DFS requirement.

Use the new driver event to allow the driver to notify expiry of the CAC
result on a channel. Move the DFS state of the channel to 'usable' when
processing pre-CAC expired event.  This means any future operation on
that channel will require a new CAC to be completed. This event is
applicable only when DFS is not offloaded to the kernel driver.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
2017-03-09 17:01:50 +02:00
Alexei Avshalom Lazar
160dca0784 Add QCA vendor command/attr for BRP antenna limit control
Add QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT for setting the number
of antennas that will be active in different modes for each connection.

Signed-off-by: Alexei Avshalom Lazar <qca_ailizaro@qca.qualcomm.com>
2017-03-02 15:05:46 +02:00
Amarnath Hullur Subramanyam
e9518ae749 WFD: Add WFD R2 Subelements
Define and add support for WFD R2 Subelements.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:59:57 +02:00
Gaole Zhang
21ac782797 QCA nl80211 vendor attribute for specific sub-20 MHz channel width
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH.
This attribute can set a station device to work in 5 or 10 MHz channel
width while in disconnect state.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:55:04 +02:00
Jouni Malinen
4c8836f139 FILS: Fix fils_hlp.c build with older netinet/udp.h definitions
The __FAVOR_BSD macro was previously used in netinet/udp.h to select
between two different names of the variables in struct udphdr. Define
that to force the versions with the uh_ prefix. In addition, use the
same style consistently within fils_hlp.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-26 12:18:29 +02:00
Peng Xu
7785c70bbb QCA vendor command for fetching HE capabilities
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:39:30 +02:00
Peng Xu
94380cb40a hostapd: Initial IEEE 802.11ax (HE) definitions
Add IEEE 802.11ax definitions for config, IEEE structures, and
constants. These are still subject to change in the IEEE process.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:37:52 +02:00
Masashi Honma
a7a638c2c4 hw_features: Move VHT capabilities checks to common
This allows the previous AP-specific functions to be use for IBSS/mesh
setup in wpa_supplicant.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-02-19 15:53:05 +02:00
Jouni Malinen
e491389ebc FILS: Fix ifdef for PTK derivation with SHA384-based AKM
sha384_prf() is used both with Suite B and FILS, so add CONFIG_FILS as
another alternative to building in this functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-16 22:15:29 +02:00
Jouni Malinen
364c064a41 FT: Check key derivation results explicitly in AP operations
Previously, any potential (even if very unlikely) local operation error
was ignored. Now these will result in aborting the negotiation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-14 16:33:01 +02:00
Jouni Malinen
4d6e79f867 Use defines in hostapd_set_freq_params()
Use the defines for vht_oper_chwidth values more consistently in
hostapd_set_freq_params() to make this more readable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-02-04 20:50:16 +02:00
Jouni Malinen
09a97eb27e Update the copyright notice years for QCA vendor definitions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-04 17:05:30 +02:00
Sunil Dutt
841e9a8c73 QCA vendor command to set the trace levels for the specific QCA module
This commit introduces the vendor command to set the trace level
for the respective QCA host driver module.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-04 17:05:21 +02:00
Jouni Malinen
124ddfa19e FILS: Parse and report received FILS HLP Containers from response
The new FILS-HLP-RX control interface event is now used to report
received FILS HLP responses from (Re)Association Response frame as a
response to the HLP requests configured with FILS_HLP_REQ_ADD.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-01 18:17:39 +02:00
Jouni Malinen
e64c13febb Move DHCP definitions into a common file
These can be reused for other purposes than just the DHCP snoofing for
Proxy ARP. In addition, use more complete definition of the parameters
based on the current IANA registry.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-31 17:46:11 +02:00
Kanchanapally, Vidyullatha
70407ee5c3 Add QCA vendor definitions for BSS transition status
Introduce definitions for QCA vendor specific subcommands and attributes
for fetching BSS transition status.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-30 22:31:46 +02:00
Sunil Dutt
a9491695b3 QCA vendor command to set/get NUD statistics
This commit introduces QCA vendor commands and the corresponding
attributes to set/get NUD (Network Unreachability Detection) statistics.
The set NUD statistics configures the requisite parameters to the host
driver and thereby triggers the start/stop of collection of statistics.
The get stats fetches the statistics collected in the host driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-30 01:54:30 +02:00
Masashi Honma
9eb5757a86 Define helper function set_disable_ht40()
This functionality can be used outside wpa_set_disable_ht40(), so move
the generic part to a helper function.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-29 18:04:21 +02:00
Jouni Malinen
a1aa2aebc2 Remove unused WLAN_CIPHER_SUITE_* definitions
This gets rid of an unnecessary duplication of the definitions since all
the code has now been moved to using the earlier RSN_CIPHER_SUITE_*
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:05:44 +02:00
Jouni Malinen
2373a31170 Define all RSN_CIPHER_SUITE_* values
This adds the cipher suite selector values for ciphers that are not
really used with RSN, but are needed to be able to replace
WLAN_CIPHER_SUITE_* definitions with RSN_CIPHER_SUITE_*.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:03:34 +02:00
Jouni Malinen
89ba101e14 Remove unused WLAN_AKM_SUITE_* definitions
This gets rid of an unnecessary duplication of the definitions since all
the code has now been moved to using the earlier RSN_AUTH_KEY_MGMT_*
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:36:13 +02:00
Jouni Malinen
bf9f8a0525 Use RSN_AUTH_KEY_MGMT_* instead of WLAN_AKM_SUITE_* for wpa_akm_to_suite()
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:34:49 +02:00
Jouni Malinen
a1343fa6ba Remove unnecessary ifdef from RSN_AUTH_KEY_MGMT_* definitions
These FT AKM suite selectors might be needed in code even if
CONFIG_IEEE80211R is not defined.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:26:25 +02:00
Jouni Malinen
510fc2dfc9 Fix AKM suite selectors for FILS and Suite B
IEEE 802.11 standard defines the suite selectors in <OUI>:<subtype>
format where OUI uses hexadecimal format and subtype decimal format.
These WLAN_AKM_SUITE_* definitions ended up getting written incorrectly
by interpretting the decimal part as hexadecimal and as such, by having
an incorrect value. However, the older RSN_AUTH_KEY_MGMT_* values were
defined with correct values and those definitions were used in most
locations.

This commit fixes the AKM suite selector values in RADIUS WLAN-AKM-Suite
attribute for FILS and Suite B. In addition, the AKM values used in
nl80211 driver configuration (NL80211_ATTR_AKM_SUITES) are fixed for the
Suite B cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-27 23:13:10 +02:00
Sunil Dutt
d7d0f909f1 QCA vendor command to carry the reason for power save failure
This commit defines a QCA vendor command
QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE that carries required
information leading to the power save failure. This will be an event
from the host driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 18:47:16 +02:00
Purushottam Kushwaha
4c4070005a QCA vendor command to enable host driver offload ACS to user space
This commit introduces the QCA vendor command and the attributes which
facilitate the host driver to use an external user space entity for
performing automatic channel selection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-23 06:32:59 +02:00
Jouni Malinen
fcd3d6ce32 FILS: Fix PMK and PMKID derivation from ERP
This adds helper functions for deriving PMK and PMKID from ERP exchange
in FILS shared key authentication as defined in IEEE Std 802.11ai-2016,
12.12.2.5.2 (PMKSA key derivation with FILS authentication). These
functions is used to fix PMK and PMKID derivation which were previously
using the rMSK directly as PMK instead of following the FILS protocol to
derive PMK with HMAC from nonces and rMSK.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-13 21:07:40 +02:00
Jouni Malinen
a2aa21a3bf Assign additional vendor specific elements for early HE testing
These elements can be used for pre-standard publication testing of HE
before P802.11ax draft assigns the element ID extension. The payload of
these vendor specific elements is defined by the latest P802.11ax draft.
Please note that the draft is still work in progress and the element
payload is subject to change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-13 15:05:26 +02:00
Jouni Malinen
0f9b4a0f1d bgscan: Deliver beacon loss event to bgscan modules
This adds a call to the notify_beacon_loss() callback functions when
beacon loss is detected. In addition, a new CTRL-EVENT-BEACON-LOSS event
is made available through the wpa_supplicant control interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 12:17:58 +02:00
Jouni Malinen
ec45927b8a Report received beacon report with BEACON-RESP-RX event
The new hostapd control interface event "BEACON-RESP-RX <STA address>
<dialog token> <report mode> <beacon report>" is now used to report
received beacon reports as a reponse to the REQ_BEACON operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-03 16:02:58 +02:00
Jouni Malinen
f3383366aa Report beacon request TX status as control interface event
The new BEACON-REQ-TX-STATUS control interface event is now used to
report whether a beacon request (from REQ_BEACON command) was delivered
successfully. This event has the following parameters: <STA address>
<dialog token> <ack=0/1>.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-03 16:02:58 +02:00
Avraham Stern
c9ff8e5f6e common: Add function to get an operating class by its number and country
Add a function to get operating class definition (including bandwidth,
channel numbers, etc.) from the operating class number and country.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-01-03 15:18:29 +02:00
Avraham Stern
e4f1d879cd common: Add non-global to global operating classes conversion
Add helper function that converts non-global operating classes to global
operating classes according to IEEE Std 802.11-2016, Annex E.

Signed-off-by: Avrahams Stern <avraham.stern@intel.com>
2017-01-03 15:18:29 +02:00
Avraham Stern
d1c74f8c98 Add RRM definitions for beacon report measurement
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-01-03 15:18:29 +02:00
Jouni Malinen
946315f172 tests: More ieee802_11_vendor_ie_concat() coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-26 14:44:44 +02:00
Jouni Malinen
901e6fabcb tests: More ieee802_11_parse_elems() coverage for new elements
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-26 14:30:50 +02:00
Joel Cunningham
04f02faac4 Fix wpa_cipher_to_alg() return type
wpa_cipher_to_alg() returns enumerated values from enum wpa_alg and all
uses of the return value treat it as enum wpa_alg (by either assigning
it to a variable of type enum wpa_alg or passing to a function that
expects enum wpa_alg).

This commit updates the return value to match the expected usage
(enum  wpa_alg) rather than int. This ensures the return value is
of the proper type and eliminates the following compiler warnings:

ARM RVCT (2.2):
  'Warning: #188-D: enumerated type mixed with another type'

Signed-off-by: Joel Cunningham <joel.cunningham@me.com>
2016-12-21 12:48:16 +02:00
Purushottam Kushwaha
a6f3761f7d eap_proxy: Add support for SIM state change indication from eap_proxy
This registers a new callback to indicate change in SIM state. This
helps to do some clean up (more specifically pmksa_flush) based on the
state change of the SIM. Without this, the reconnection using the cached
PMKSA could happen though the SIM is changed.

Currently eap_proxy_sim_state corresponds to only SIM_STATE_ERROR. This
can be further extended.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-19 22:21:07 +02:00
Jouni Malinen
b54f43390e FILS: Make FILS Indication element information available in BSS output
This extends wpa_supplicant BSS command to parse FILS Indication
element.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 11:41:59 +02:00
Jouni Malinen
8183aee6cc FILS: Add support for building FILS Realm Information ANQP-element
This allows full list of hashed realm names to be fetched from hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 11:41:59 +02:00
Jouni Malinen
42b847ac1e FILS: Fix hashed realm name derivation
P802.11ai/D7.0 changed from CRC32 to SHA256 as the hash algorithm for
the FILS realm name. Update the implementation to match that change.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-17 22:07:57 +02:00
Jouni Malinen
29062f2932 Update various definitions based on IEEE Std 802.11-2016
This updates definitions for Status Codes, Reason Codes,
Information Element IDs, Action frame categories, Public Action
codes, Protected Dual of Public Action codes, Advertisement
Protocol ID, and ANQP info IDs based on IEEE Std 802.11-2016.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-17 12:27:49 +02:00
Jouni Malinen
19810d29bc Make Beacon IEs available in wpa_supplicant BSS command
This makes both the Probe Response and Beacon frame IEs available to
upper layers if scan results include both IE sets. When the BSS command
mask includes WPA_BSS_MASK_BEACON_IE, a new beacon_ie=<hexdump> entry
will be included in output if the BSS entry has two separate sets of IEs
(ie=<hexdump> showing the Probe Response frame contents and
beacon_ie=<hexdump> the Beacon rame contents).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-13 20:07:52 +02:00
Jouni Malinen
c579312736 Add PMKSA-CACHE-ADDED/REMOVED events to wpa_supplicant
These allow external program to monitor PMKSA cache updates in
preparation to enable external persistent storage of PMKSA cache.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-12 21:00:43 +02:00
Sunil Dutt
444930e5b6 Define an attribute to do a specific BSSID QCA vendor scan
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-11 21:36:13 +02:00
Sunil Dutt
cea761472a Add QCA vendor command definitions for IDs 61-73
This commit documents the QCA vendor commands 61-73 and the
corresponding definitions of the attributes. This set of commands were
previously reserved for QCA without documentation here.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-11 21:32:20 +02:00
Sunil Dutt
cb0cc6efa6 Define QCA Beacon miss threshold attributes for 2.4 and 5 GHz bands
These thresholds values indicate how many Beacon frames can be missed
before before disconnecting from the AP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-11 21:11:41 +02:00
Jouni Malinen
c313c8a5d8 Fix QCA vendor command values for SAR power limits
Commit c79238b6a4 ('Define a QCA vendor
command to configure SAR Power limits') had a mismatch between the enum
qca_vendor_attr_sar_limits_selections documentations and actual values.
The BDF SAR profiles are 0-based, so rename the enum values and reorder
the values keep the actual values more convenient. While this changes
values over the interface, this is justifiable since the new command was
introduced only recently and it had not been released in any driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-11 21:08:25 +02:00
Jouni Malinen
71ac934530 Make update_idx available in BSS control interface command
This can be used to perform more accurate tests on BSS entry updates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-10 17:03:24 +02:00
Jeff Johnson
c79238b6a4 Define a QCA vendor command to configure SAR Power limits
There is a regulatory requirement for Specific Absorption Rate (SAR)
whereby the device transmit power is reduced when it is determined that
the device is in close proximity to the body. Implement a vendor command
interface to allow a userspace entity to dynamically control the SAR
power limits.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-08 18:56:02 +02:00
Jouni Malinen
865081c307 privsep: Support frequency list for scan requests
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:27:16 +02:00
Jouni Malinen
da818ee5e9 privsep: Support multiple scan SSIDs
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:17:28 +02:00
Jouni Malinen
002b504d19 privsep: Coding style cleanup for struct definitions
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:06:03 +02:00
Sunil Dutt
1a793f5c2b Define a QCA vendor command to abort vendor scan
The new QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN command can be used to
abort an ongoing scan that was started with
QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-30 17:11:01 +02:00
Purushottam Kushwaha
29483a5678 Add support for user configurable Beacon frame data rate for AP mode
Allow configuration of Beacon frame TX rate from hostapd.conf with
"beacon_rate=xx" option. The following format is used to set
legacy/HT/VHT beacon rates:

Legacy (CCK/OFDM rates):
	beacon_rate=<legacy rate in 100 kbps>
HT:
	beacon_rate=ht:<HT MCS>
VHT:
	beacon_rate=vht:<VHT MCS>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 23:12:30 +02:00
Sabrina Dubroca
7b4d546e3d wpa_supplicant: Add macsec_integ_only setting for MKA
So that the user can turn encryption on (MACsec provides
confidentiality+integrity) or off (MACsec provides integrity only). This
commit adds the configuration parameter while the actual behavior change
to disable encryption in the driver is handled in the following commit.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-20 00:35:16 +02:00
Peng Xu
5e785a6792 Reserve QCA vendor specific nl80211 command 144
This is reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-17 16:00:59 +02:00
Avraham Stern
e4b48b7b0f Extend ieee80211_freq_to_channel_ext() to cover channels 52-64
Add frequency to channel conversion for the 5 GHz channels 52-64.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-10-29 21:51:04 +03:00
Sunil Dutt
14cd203fff QCA vendor command to configure the TDLS behavior in the host driver
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:12:25 +03:00
lifeng
a18563d428 Extend QCA vendor attribute link layer statistics attribute
This adds new statistics attributes to support channel hopping feature.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 22:05:59 +03:00
lifeng
95f3703ae1 Add more QCA vendor attribute definitions into qca-vendor.h
These attributes were previously maintained elsewhere. This commit moves
them to follow the standard assignment process through the qca-vendor.h
file in hostap.git.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 22:03:33 +03:00
lifeng
87416eaf64 QCA vendor attribute to report frame aggregation failure
Add a new vendor attribute config to set the reorder blocksize and
timeout in 4 ACs, and then report the frame aggregation failure
statistics in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command. In addition,
fix the spelling of the enum value for this subcommand.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 21:46:04 +03:00
Jouni Malinen
14de9e31c4 FILS: Include wpa_insert_pmkid() in non-FT builds
This function is needed for FILS as well as FT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 22:55:27 +03:00
Jouni Malinen
a852ab4c72 FILS: Key-Auth derivation function for FILS SK
This implements Key-Auth derivation for (Re)Association Request frames
(see P802.11ai/D11.0 12.12.2.6.2) and (Re)Association Response frames
(see P802.11ai/D11.0 12.12.2.6.3).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Jouni Malinen
c089bc5725 FILS: PMK-to-PTK key derivation for FILS authentication
This is the PTKSA key derivation used as part of the FILS authentication
exchange. See P802.11ai/D11.0 12.12.2.5.3.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Jouni Malinen
ce16c489d8 Rename sae_data to more generic auth_data
This makes it cleaner for the FILS implementation to use the same design
for setting Authentication frame elements as was already done with SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Lior David
6eb1a569ca Add QCA vendor command/attr for low level DMG(11ad) RF sector control
Add operations to allow low level control over RF sectors in QCA DMG
(11ad) chipsets. Operations include getting/setting the configuration of
a specific sector, as well as getting/setting the selected sector which
the HW uses to communicate with a specific station.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-10-17 11:43:57 +03:00
Jouni Malinen
6d014ffc6e Make struct wpa_eapol_key easier to use with variable length MIC
Suite B 192-bit addition from IEEE Std 802.11ac-2013 replaced the
previous fixed length Key MIC field with a variable length field. That
change was addressed with an addition of a new struct defined for the
second MIC length. This is not really scalable and with FILS coming up
with a zero-length MIC case for AEAD, a more thorough change to support
variable length MIC is needed.

Remove the Key MIC and Key Data Length fields from the struct
wpa_eapol_key and find their location based on the MIC length
information (which is determined by the AKMP). This change allows the
separate struct wpa_eapol_key_192 to be removed since struct
wpa_eapol_key will now include only the fixed length fields that are
shared with all EAPOL-Key cases in IEEE Std 802.11.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:46 +03:00
Jouni Malinen
94f66e8a26 FILS: Advertise ERP domain in FILS Indication element
Calculate the hashed realm from hostapd erp_domain configuration
parameter and add this to the FILS Indication element when ERP is
enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:46 +03:00
Jouni Malinen
274d8b776f FILS: Add definitions for new frames and values
This adds definitions for various management frame elements and values
from P802.11ai/D11.0.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 20:46:36 +03:00
Jouni Malinen
94318a0d30 FILS: Add AKM definitions
This adds definitions for the new AKM suite values from P802.11ai/D11.0.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 20:46:36 +03:00
Jouni Malinen
1d29163035 FILS: Add new information elements
This adds definitions for new information elements from P802.11ai/D11.0
and parsing of these IEs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 20:46:33 +03:00
Michael Braun
96590564d6 FT: Allow PMK-R0 and PMK-R1 for FT-PSK to be generated locally
Station should be able to connect initially without ft_pmk_cache filled,
so the target AP has the PSK available and thus the same information as
the origin AP. Therefore neither caching nor communication between the
APs with respect to PMK-R0 or PMK-R1 or VLANs is required if the target
AP derives the required PMKs locally.

This patch introduces the generation of the required PMKs locally for
FT-PSK. Additionally, PMK-R0 is not stored (and thus pushed) for FT-PSK.

So for FT-PSK networks, no configuration of inter-AP communication is
needed anymore when using ft_psk_generate_local=1 configuration. The
default behavior (ft_psk_generate_local=0) remains to use the pull/push
protocol.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-10-09 11:57:56 +03:00
Lior David
32d08d5bf6 Add QCA vendor attributes for measurement frequency for FTM/AOA
Add attributes for specifing the frequency where FTM/AOA measurement is
done over the air. This allows the user space framework to maintain its
own cache of peers without depending on the kernel scan results cache,
or perform scans less often (since entries in the kernel scan results
cache expire quickly). The change is backward compatible. If the
frequency attribute is not specified, the kernel scan results cache will
be queried, like done today.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-10-04 23:44:18 +03:00
Jouni Malinen
98529f3857 The master branch is now used for v2.7 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-02 22:27:26 +03:00
Jouni Malinen
2462f347bc Change version number to v2.6 for the release
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-02 21:51:11 +03:00
Sunil Dutt
8b6688847e Add explicit enum values for QCA vendor config attributes
This makes it easier to copy a subset of definitions without
accidentally getting mismatching values.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
vamsi krishna
8f47917493 MBO: Add support to send ANQP request to get cellular preference
This extends ANQP_GET command to support querying MBO cellular
preference also. The cellular preference can be requested along with
neigbor report by appending mbo:1 to the command arguments.

For example:
ANQP_GET <bssid> 272,mbo:1

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
lifeng
8b7c5b8941 QCA vendor command for antenna diversity feature
The user space app use QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI cmd to
get the corresponding antenna rssi value for the specific chain. And the
associcated attributes are added to configure the antenna diversity and
related selftest.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-09-26 23:46:59 +03:00
vamsi krishna
2800ec85d2 MBO: Add QCA vendor option to configure driver to ignore assoc disallow
MBO capable APs can set association disallowed in the Beacon/Probe
Response frames. For testing purposes, the STA needs to be configured to
not ignore the association disallowed set by APs and continue to connect
to such AP like non-MBO enabled STA. Add a QCA vendor attribute for
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor sub command to
configure the driver to ignore association disallowed functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-25 17:31:26 +03:00
Zhang Qian
320caeab29 Add attributes for QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT
More attributes are added for QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT
1. Peer signal stats;
2. Peer TX stats;
3. Peer RX stats

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2016-09-23 21:13:58 +03:00
Srinivas Dasari
0d7eba5417 Define a QCA vendor command to validate encryption engine
This command carries 802.11 header and payload along with key (TK) and
PN for encryption/decryption purpose. Firmware/driver encrypts/decrypts
the given data and sends to userspace as a response to the command. User
space component can validate the data received from the driver to unit
test the hardware's encryption engine.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-22 20:30:05 +03:00
Lior David
a62dea4156 Fix mistakes in definition of QCA vendor commands for indoor location
Fix some mistakes in the previous commit for adding QCA vendor commands
for indoor location.

Note: The renamed enum value does not change the ABI, but the addition
of QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID in the beginning of enum
qca_wlan_vendor_attr_ftm_meas does renumber
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_* values. The previous values were
committed yesterday and have not been used in any released code yet, so
this is a justifiable quick fix.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-09-06 23:38:47 +03:00
Lior David
fcd85d9a3f Add QCA vendor commands/attributes for indoor location
Assign QCA vendor specific commands, attributes, and events for
supporting indoor location features.

These features include:

1. Fine timing measurement (FTM) - allows measurement of distance
between two stations. Based on IEEE P802.11-REVmc/D7.0, 11.24.6 FTM is
performed between two stations: one is an initiator, typically a client
that wants to measure distance to another AP, and one is a responder,
typically an AP which responds to measurement requests from other
clients. The responder can be configured to report its location, either
in absolute coordinates (LCI) or free-form description (LCR).

2. Angle of arrival (AOA) - allows measurement of azimuth and elevation
between two stations.

The above features can be combined to allow a station to get an accurate
indoor location.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-09-05 21:59:18 +03:00
Zhang Qian
22950d0568 QCA vendor subcommand for LL_STATS extension
Some user space monitor wants to offload link layer statistics to
firmware. A new command QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT and
associcated attributes are added. The monitor will use this new command
to configure monitoring paramters and get link layer statistics.
Attributes added in this change:
1. Parameters for FW to trigger the statistics report
2. Peer STA power state
3. TX failure statistics

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2016-09-05 20:50:10 +03:00
Sabrina Dubroca
07a6bfe1d2 mka: Store cipher suite ID in a u64 instead of u8 pointer
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-08-28 21:55:54 +03:00
Yingying Tang
6fe3b9d451 QCA vendor command to get hardware capabilities
This commit introduces a new vendor sub command
QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY and the associated
attributes to get Wi-Fi hardware capabilities.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
2016-08-10 16:49:46 +03:00
Sunil Dutt
dc24a3616a Define an attribute QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER
This can be used to enable/disable QPOWER.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-09 19:23:25 +03:00
Jouni Malinen
ac81b3948b cli: Share a common tokenize_cmd() implementation
wpa_cli and hostapd_cli had identical copies of this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:46:39 +03:00
Jouni Malinen
980afcce53 cli: Share a common write_cmd() implementation
wpa_cli and hostapd_cli had identical copies of this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:41:56 +03:00
Jouni Malinen
fcc84b48b2 cli: Share a common get_cmd_arg_num() implementation
wpa_cli and hostapd_cli had identical copies of this function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-08-06 12:39:56 +03:00
Mikael Kanstrup
23c130e9b7 Use a common license string for hostapd_cli and wpa_cli
Move the license strings for hostapd_cli and wpa_cli to common.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:34:25 +03:00
Mikael Kanstrup
977c0796f9 Move parts of wpa_cli to a new common file
In preparation for adding further command completion support
to hostapd_cli move some cli related utility functions out of
wpa_cli into a new common cli file.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-08-06 12:25:58 +03:00
Sunil Dutt
fed802c2e8 Define an attribute QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX
This can be used to set the configuration parameters per netdev (instead
of wiphy).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-04 21:50:26 +03:00
Sunil Dutt
14b7612447 Define vendor command to support IE based access control
This commit defines QCA vendor subcommand and attributes for IE based
access control, i.e., the specific configured IE (full IE) is matched
with the frames originated by the Wi-Fi STA / AP to accept or deny the
connection. A specific IE can either be a whitelist or blacklist.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-04 21:50:22 +03:00
Vikram Kandukuri
4ac75cd01a QCA vendor command to configure GPIO pins
This commit introduces a new vendor sub command
QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND and associated
attributes to configure GPIO pins.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-03 16:46:30 +03:00
Vikram Kandukuri
babf0ce0d2 Assign QCA vendor attributes for generic commands
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-03 16:44:07 +03:00
Jouni Malinen
4f910f38e5 Fix a typo in QCA vendor attribution documentation
The previously used subcommand names in the comment did not match the
ones defined above.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 21:11:25 +03:00
vamsi krishna
ab21863108 Define QCA vendor config attribute to set default scan IEs to the driver
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 21:11:05 +03:00
Sunil Dutt
6c34b9c2d2 Assign QCA vendor attribute for setting TX fail count threshold
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-22 20:10:06 +03:00
zhangq
52fec3669c Assign QCA vendor attributes for set retry configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-22 00:35:37 +03:00
Chandrasekaran, Manishekar
1c8fe68f62 QCA vendor command to configure conditional switch channel for AP
This commit introduces a new vendor sub command
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH and associated
attributes which aim to configure selected frequencies on which the AP
can conditionally switch onto for preferred operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-22 00:35:28 +03:00
Jouni Malinen
f465c32dc2 Interworking: Define control interface message prefixes in wpa_ctrl.h
These control interface event message are used by external programs, so
define them a bit more formally in the header file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Peng Xu
a6f5b1937a P2P: Allow P2P listen being offloaded to the driver/firmware
This allows P2P Listen to be offloaded to device to enhance power
saving.

To start P2P listen offload, from wpa_cli interface, issue the command:
	p2p_lo_start <freq> <period> <interval> <count>

To stop P2P listen offload, issue the command:
	p2p_lo_stop

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-03 22:36:58 +03:00
Peng Xu
35d6655755 nl80211: P2P Listen offload vendor command definitions
Define QCA vendor commands, events, and attributes for P2P
Listen offload.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-03 19:13:42 +03:00
Saurav Babu
4ac5f2f8f4 Add text name for WPA_KEY_MGMT_WPA_NONE key_mgmt value
This will output WPA-NONE for WPA_KEY_MGMT_WPA_NONE key_mgmt value in
STATUS command.

Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2016-07-03 19:13:41 +03:00
Jouni Malinen
d02e549831 mesh: Rename MPM FSM states to match the standard
During the P802.11s draft development, there were separate LISTEN and
IDLE states. However, the current IEEE 802.11 standards uses only the
IDLE state while the implementation called this LISTEN. Rename the state
in the implementation to match the one used in the standard to avoid
confusion. In addition, rename OPEN_{SENT,RCVD} to OPN_{SNT,RCVD} to
match the exact spelling of these states in the standard.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 22:53:05 +03:00
Jouni Malinen
37fd0be2d3 Add CTRL-EVENT-CHANNEL-SWITCH event to indicate channel changes
This provides information of the channel switch to wpa_supplicant
control interface monitors.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-27 21:10:35 +03:00
Jouni Malinen
617593c37f Assign vendor specific elements for early HE testing
These elements can be used for pre-standard publication testing of HE
before P802.11ax draft assigns the element ID. The payload of these
vendor specific elements is defined by the latest P802.11ax draft.
Please note that the draft is still work in progress and the element
payload is subject to change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-24 19:02:58 +03:00
Jouni Malinen
4e7f5a4a2a PAE: Use be16/be32 instead of u16/u32 for spartse
This converts some of the PAE code to use a design that gets rid
unnecessary warnings from sparse and allows more thorough validation of
byte order operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-24 01:38:48 +03:00
Jouni Malinen
50a17a76e1 tests: Declare module test functions in a header file
This gets rid of number of warnings from sparse.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-23 18:26:09 +03:00
Masashi Honma
d70a8ab1e3 mesh: Ignore crowded peer
The "Accepting Additional Mesh Peerings bit == 0" means the peer cannot
accept any more peers, so suppress attempt to open a connection to such
a peer.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-06-19 20:18:09 +03:00
Jouni Malinen
f868d5607d mesh: Clean up AMPE element encoding and parsing
The AMPE element includes number of optional and variable length fields
and those cannot really be represented by a fixed struct
ieee80211_ampe_ie. Remove the optional fields from the struct and
build/parse these fields separately.

This is also adding support for IGTKdata that was completely missing
from the previous implementation. In addition, Key RSC for MGTK is now
filled in and used when configuring the RX MGTK for a peer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-19 20:18:09 +03:00
Sunil Dutt
d1296da643 Reserve QCA vendor specific nl80211 command 121
This is reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 00:10:16 +03:00
Sunil Dutt
52a6c9c9e8 Add a QCA vendor command to configure AP parameters
This commit also introduces a new attribute MANDATORY_FREQUENCY_LIST
which aims for AP operation in a channel that ensures best concurrency
sessions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-16 18:38:16 +03:00
Sunil Dutt
ac7aea862f Assign QCA vendor command/attributes for set/get wifi configuration
This adds QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION and the attributes used
with these commands.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-19 00:49:33 +03:00
Lior David
0ee8925098 P2P: Trigger event when invitation is accepted
Trigger an event when wpa_supplicant accepts an invitation to re-invoke
a persistent group. Previously wpa_supplicant entered group formation
without triggering any specific events and it could confuse clients,
especially when operating with a driver that does not support
concurrency between P2P and infrastructure connection.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-04-18 16:57:05 +03:00
David Spinadel
220754c553 hostapd: Add FTM range request
Add FTM range request via RRM. The AP sends Radio measurement request
with FTM range request as a request for the receiving STA to send FTM
requests to the given list of APs. The neighbor report part of the
request is taken from the neighbor database.

The control interface command is:

REQ_RANGE <dst addr> <rand_int> <min_ap> <responder> [<responder>..]

dst addr: MAC address of an associated STA
rand_int: Randomization Interval (0..65535) in TUs
min_ap: Minimum AP Count (1..15); minimum number of requested FTM ranges
	between the associated STA and the listed APs
responder: List of BSSIDs for neighboring APs for which a measurement
	is requested

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:12 +03:00
David Spinadel
f4f185a224 hostapd: Add LCI request
Add a hostapd control interface command REQ_LCI to request LCI from an
associated station using radio measurement.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:12 +03:00
David Spinadel
629e1804da hostapd: Save RM enabled capability of station
Save RM enabled capability element of an associating station if radio
measurement is supported in its capability field.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:12 +03:00
David Spinadel
2572df34b2 hostapd: Handle Neighbor Report Request frame
Process Neighbor Report Request frame and send Neighbor Report Response
frame based on the configured neighbor report data.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:29:07 +03:00
David Spinadel
010182120d hostapd: Extend the configuration of RRM capabilities
Extend the radio_measurements parameter to save all the supported
RRM capabilities as it's used in RM enabled capabilities element.

Make this parameter not directly configurable via config file (though,
keep the radio_measurements parameter for some time for backwards
compatibility). Instead, add a configuration option to enable neighbor
report via radio measurements. Other features can be added later as
well.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:39 +03:00
David Spinadel
624b8a061f utils: Add ssid_parse() function
Add a function that parses SSID in text or hex format. In case of the
text format, the SSID is enclosed in double quotes. In case of the hex
format, the SSID must include only hex digits and not be enclosed in
double quotes. The input string may include other arguments after the
SSID.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-16 21:05:37 +03:00
David Spinadel
e4fbc8d423 Add measurement and neighbor report definitions
Add measurement report definitions from Table 9-81 in IEEE
P802.11-REVmc/D5.0 "Measurement type definition for measurement
requests".

Add measurement report definitions from IEEE Std 802.11-2012 Table 8-71
"Location subject definition".

Add neighbor report bandwidth subelement definition from IEEE
P802.11-REVmc/D5.0 MC Table 9-150 - "Optional subelement IDs
neighbor report"

Add neighbor report channel width definition from IEEE
P802.11-REVmc/D5.0, Table 9-152 - "HT/VHT Operation Information
subfields".

Add definitions for neighbor report BSSID info from IEEE
P802.11-REVmc/D5.0, 9.4.2.37 Neighbor Report element.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-09 11:45:42 +03:00
Jouni Malinen
1854eeca19 Add POLL_STA command to check connectivity in AP mode
The hostapd "POLL_STA <addr>" control interface command can be used to
check whether an associated station ACKs a QoS Data frame. The received
ACK for such a frame is reported as an event message ("AP-STA-POLL-OK
<addr>").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-09 00:30:49 +03:00
Jouni Malinen
61c101186a Extend VENDOR_ELEM parameters to cover non-P2P Probe Request frame
The new VENDOR_ELEM value 14 can now be used to add a vendor element
into Probe Request frames used by non-P2P active scans.

For example:
VENDOR_ELEM_ADD 14 dd05001122330a
and to clear that:
VENDOR_ELEM_REMOVE 14 *

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-09 00:30:49 +03:00
Manikandan Mohan
85c0f01dd8 Add QCA nl80211 vendor commands for TSF and WISA Feature
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-04-05 19:31:09 +03:00
Jouni Malinen
5914ebf584 Remove struct ieee80211_mgmt::u.probe_req
This struct in the union is empty, but the design of using a zero-length
u8 array here is not fully compatible with C++ and can result in
undesired compiler warnings. This struct is not used anymore, so it can
be removed from the struct ieee80211_mgmt definition to complete the
changes started in commit d447cd596f
('Updates for stricter automatic memcpy bounds checking').

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-02 16:55:02 +03:00
Sunil Dutt
f933216141 Revert "Assign QCA vendor command and attribute for Tx/Rx aggregation"
This reverts commit 4ca16b5fd7.
Configuration for this will be done using a previously assigned more
generic command. This new command
QCA_NL80211_VENDOR_SUBCMD_SET_TXRX_AGGREGATION has not been used in any
driver version and won't be used, so the assigned command id can be
freed for future use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-31 16:27:24 +03:00
Jouni Malinen
bde9a4e3de Comment out UDP/UNIX socket code from common ctrl_iface based on build
These were unreachable cases in the switch statements based on how the
build was configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-28 00:17:45 +03:00
Jouni Malinen
0741c481ee SAE: Check SHA256-PRF operation result
While this is mostly theoretical, check explicitly that SHA256
operations in sha256_prf*() succeed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 21:44:49 +03:00
Jouni Malinen
ea86a34667 SAE: Remove dead code in FFC pwd-value derivation
The local bits variable is set to prime_len * 8 and consequently bits %
8 cannot be anything else than 0.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-27 21:28:45 +03:00
Jouni Malinen
9b7cd5788a Use a separate header file for Linux bridge interface definitions
This moves the BRCTL_* defines from vlan_full.c to linux_bridge.h to
clean up header inclusion.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 11:27:18 +02:00
Jouni Malinen
c815fab83a Use own header file for defining Linux VLAN kernel interface
This gets rid of need to include linux/if_vlan.h and additional defines
in vlan_ioctl.c to avoid issues with missing definitions in libc
headers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 11:24:38 +02:00
Sunil Dutt
4ca16b5fd7 Assign QCA vendor command and attribute for Tx/Rx aggregation
Assign nl80211 vendor command
QCA_NL80211_VENDOR_SUBCMD_SET_TXRX_AGGREGATION and corresponding
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-17 20:53:25 +02:00
Jouni Malinen
f85399f396 Reserve QCA vendor specific nl80211 commands 116..118
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-08 23:08:45 +02:00
Janusz Dziedzic
acf57fae76 ctrl_iface_common: Use sockaddr_storage instead of sockaddr_un
This is a step towards allowing UDP sockets to be used with the common
implementation.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Janusz Dziedzic
ca974ae53f Add common ctrl_iface files
This is preparation for sharing a single implementation for ctrl_iface
functionality in wpa_supplicant and hostapd.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-03-05 17:15:05 +02:00
Lior David
2b6e9f91df wpa_supplicant: Expose wpas_get_bands() and related API
Expose the functions wpas_get_bands() and wpas_freq_to_band() and the
enum wpa_radio_work_band, since they will be needed outside
wpa_supplicant.c.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-03-03 15:10:50 +02:00
Jouni Malinen
adf0478e8e AP: Store STA supported operating classes information
This makes hostapd track Supported Operating Classes information from
the associated STAs. The stored information is available through the STA
control interface command (supp_op_classes row) as a hexdump of the
Supported Operating Classes element starting from the Length field. This
information can be used as input to BSS transition management and
channel switching decisions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-24 12:20:31 +02:00
Jouni Malinen
8dd49f0cff MBO: Update STA cellular data capability based on WNM Notification
This makes hostapd parse a received WNM Notification Request frame
subelements and if a WFA MBO cellular data capability subelement is
seen, update the cellular data capability for the STA.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-22 19:53:05 +02:00
Jouni Malinen
f4c74e1360 MBO: Parse MBO IE in ieee802_11_parse_elems()
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-22 19:53:04 +02:00
Avraham Stern
84d1c0fd5a WNM: Add candidate list to BSS transition response
Add the transition candidate list to BSS Transition Management Response
frame. The candidates preference is set using the regular wpa_supplicant
BSS selection logic. If the BSS transition request is rejected and
updated scan results are not available, the list is not added.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
David Spinadel
cf11ab7f03 utils: Derive phy type by frequency and bandwidth
Add a function to derive phy type from frequency and bandwidth
as defined in IEEE Std 802.11ac-2013 Annex C (dot11PHYType).

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-02-22 19:53:04 +02:00
Avraham Stern
dd5999084e MBO: Parse MBO IE in BSS Transition Management Request frames
Add parsing of MBO IE in BSS Transition Management Request frames. If
the MBO IE includes the association retry delay attribute, do not try to
reconnect to the current BSS until the delay time is over.

If the MBO IE includes the cellular data connection preference attribute
or the transition rejection reason attribute, send a message to upper
layers with the data.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
Avraham Stern
7d46f586de MBO: Add global operating class definitions
Add definitions for global operating classes. These definitions will be
used to construct supported operating classes information element.

The operating classes definitions used locally for P2P module will be
removed and included in the general operating classes definitions.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-22 19:53:04 +02:00
David Spinadel
92c6e2e3a9 MBO: Implement MBO non-preferred channel report in Association Request
Add MBO IE with non-preferred channels to (Re)Association Request
frames.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-02-22 19:53:04 +02:00
David Spinadel
425dd78ad2 MBO: Add Multi Band Operation definitions
These are based on the specification draft WFA_MBO_TechSpec_v0.0_r19.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-02-21 17:51:53 +02:00
Avraham Stern
231b04b6cb utils: Share a single helper function to get IE by ID
Add a helper function to find a certain IE inside IEs buffer by ID and
use this function in several places that implemented similar
functionality locally.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-21 17:14:56 +02:00
Jörg Krause
70f4f052f1 wpa_ctrl: Retry select() on EINTR
Retry select() if it was interrupted by a signal.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
2016-02-07 12:20:38 +02:00
Jouni Malinen
0b905c8a87 Add the selector suite into wpa_parse_wpa_ie_rsn() "invalid group cipher"
This makes it easier to debug AP selection issues in case of a invalid
RSN element or use of customer cipher suites that are not supported by
wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-03 12:58:07 +02:00
Bob Copeland
6c33eed3ee mesh: Fix PMKID to match the standard
IEEE Std 802.11-2012 11.3.5.4 specifies the PMKID for SAE-derived keys
as:

   L((commit-scalar + peer-commit-scalar) mod r, 0, 128)

This is already calculated in the SAE code when the PMK is derived, but
not saved anywhere. Later, when generating the PMKID for plink action
frames, the definition for PMKID from 11.6.1.3 is incorrectly used.
Correct this by saving the PMKID when the key is generated and use it
subsequently.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2015-12-28 17:21:08 +02:00
Jouni Malinen
3c108b7573 EAP peer: External server certificate chain validation
This adds support for optional functionality to validate server
certificate chain in TLS-based EAP methods in an external program.
wpa_supplicant control interface is used to indicate when such
validation is needed and what the result of the external validation is.

This external validation can extend or replace the internal validation.
When ca_cert or ca_path parameter is set, the internal validation is
used. If these parameters are omitted, only the external validation is
used. It needs to be understood that leaving those parameters out will
disable most of the validation steps done with the TLS library and that
configuration is not really recommend.

By default, the external validation is not used. It can be enabled by
addingtls_ext_cert_check=1 into the network profile phase1 parameter.
When enabled, external validation is required through the CTRL-REQ/RSP
mechanism similarly to other EAP authentication parameters through the
control interface.

The request to perform external validation is indicated by the following
event:
CTRL-REQ-EXT_CERT_CHECK-<id>:External server certificate validation needed for SSID <ssid>

Before that event, the server certificate chain is provided with the
CTRL-EVENT-EAP-PEER-CERT events that include the cert=<hexdump>
parameter. depth=# indicates which certificate is in question (0 for the
server certificate, 1 for its issues, and so on).

The result of the external validation is provided with the following
command:
CTRL-RSP-EXT_CERT_CHECK-<id>:<good|bad>

It should be noted that this is currently enabled only for OpenSSL (and
BoringSSL/LibreSSL). Due to the constraints in the library API, the
validation result from external processing cannot be reported cleanly
with TLS alert. In other words, if the external validation reject the
server certificate chain, the pending TLS handshake is terminated
without sending more messages to the server.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 18:24:27 +02:00
Jouni Malinen
59e78c2408 FT: Fix FTIE generation for 4-way handshake after FT protocol run
wpa_insert_pmkid() did not support cases where the original RSN IE
included any PMKIDs. That case can happen when PTK rekeying through
4-way handshake is used after FT protocol run. Such a 4-way handshake
used to fail with wpa_supplicant being unable to build the EAPOL-Key msg
2/4.

Fix this by extending wpa_insert_pmkid() to support removal of the old
PMKIDs, if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:35 +02:00
Jouni Malinen
b0ecbd3a4a AP: Use more readable version of management group cipher in error cases
This makes it easier to interpret AP side debug log for a case where a
station specifies in unsupported management group cipher.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:01:05 +02:00
Ravi Joshi
f32227ed9e Add QCA vendor attribute and event to indicate subnet change status
This allows offloaded roaming to inform user space of the change in IP
subnet post roaming. The device may have roamed to a network which is in
a different subnet which will result in IP connectivity loss. Indicating
the change in subnet enables the user space to refresh the IP address or
to perform IP subnet validation if unknown status is indicated.

The driver indication is reported with a new event from wpa_supplicant
in the following format:
CTRL-EVENT-SUBNET-STATUS-UPDATE status=<0/1/2>
where
0 = unknown
1 = IP subnet unchanged (can continue to use the old IP address)
2 = IP subnet changed (need to get a new IP address)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-20 11:03:06 +02:00
Peng Xu
9a8d9f7c62 Assign QCA vendor command and attribute for Tx power reduction in dB
Assign nl80211 vendor command
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB and corresponding
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 11:34:31 +02:00
Ravi Joshi
d381963385 Extend QCA roam event with subnet change indication
The new attribute can be used with
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH to indicate whether the IP
subnet was detected to have changed when processing offloaded roam/key
management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-16 19:00:35 +02:00
Somdas Bandyopadhyay
fcdb35928c Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
Using "STATUS" command triggers CTRL-EVENT-STATE-CHANGE and
CTRL-EVENT-CONNECTED (if connected to some AP) events. These events
cause problems in Android WifiStateMachine in Marshmallow. Due to these
events WifiStateMachine sometimes disconnects the OSU SSID connection,
while hs20-osu-client waits for IP address.

Signed-off-by: Somdas Bandyopadhyay <somdas.bandyopadhyay@intel.com>
2015-11-01 21:05:10 +02:00
Jouni Malinen
45c3e72952 Add frequency to operating class determination for 5 GHz 100..140
This extends ieee80211_freq_to_channel_ext() with knowledge of the
operating classes for the 5 GHz channels 100..140.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-30 11:45:50 +02:00
Jouni Malinen
9578413455 Reserve QCA vendor specific nl80211 commands 110..114
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-27 00:10:29 +02:00
Peng Xu
5d4c508969 Assign QCA commands and attributes for Tx power scaling and OTA testing
Assign nl80211vendor commands QCA_NL80211_VENDOR_SUBCMD_OTA_TEST and
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE as well as corresponding
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-27 00:07:15 +02:00
Jouni Malinen
80c620dbd7 SAE: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:34:59 +02:00
Jouni Malinen
b6f961ab25 Avoid undefined behavior in pointer arithmetic in IE parsing
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
7b5880fcf4 FT: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
ca33a5e895 Add "git describe" based version string postfix
If hostapd or wpa_supplicant is built from a git repository, add a
VERSION_STR postfix from the current git branch state. This is from "git
describe --dirty=+". VERSION_STR will thus look something like
"2.6-devel-hostap_2_5-132-g4363c0d+" for development builds from a
modified repository.

This behavior is enabled automatically if a build within git repository
is detected (based on ../.git existing). This can be disabled with
CONFIG_NO_GITVER=y in wpa_supplicant/.config and hostapd/.config.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-16 22:20:55 +03:00
Jouni Malinen
207976f053 Fix Suite B 192-bit AKM to use proper PMK length
In addition to the PTK length increasing, the length of the PMK was
increased (from 256 to 384 bits) for the 00-0f-ac:12 AKM. This part was
missing from the initial implementation and a fixed length (256-bit) PMK
was used for all AKMs.

Fix this by adding more complete support for variable length PMK and use
384 bits from MSK instead of 256 bits when using this AKM. This is not
backwards compatible with the earlier implementations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
3f21b311b2 Interworking: Define new ANQP-element Info IDs
This adds the full set on ANQP-elements based on IEEE P802.11REVmc/D4.2.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
fa53d74c9e Handle VHT operating classes correctly
Fix and extend the ieee80211_freq_to_channel_ext() function to deal
correctly with VHT operating classes (128, 129, 130).

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 21:35:08 +03:00
Andrei Otcheretianski
6315bfdba2 Add support for eCSA
Extended channel switch provides an ability to switch between operating
classes and is required for P2P Devices by the P2P specification when
switching in 5 GHz.

When the operating class is provided for channel switch, the AP/P2P GO
will use eCSA IE in addition to the regular CSA IE both on 2.4 GHz and 5
GHz bands.

Transitions between different hw_modes are not supported.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 20:00:50 +03:00
Kanchanapally, Vidyullatha
94fb165c3a Add QCA vendor definitions for simultaneous offchannel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
b48567195d Add QCA vendor definitions for vendor scan support
Introduce definitions for QCA vendor specific subcommands
and attributes to support vendor scan request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Jouni Malinen
d02180c679 The master branch is now used for v2.6 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-27 22:12:07 +03:00
Jouni Malinen
1f344cd7b4 Change version information for the 2.5 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-27 22:02:05 +03:00
Amarnath Hullur Subramanyam
10cac5b1a2 Android: Set ctrl_iface client socket group (AID_WIFI) separately
Split chown() call in wpa_ctrl_open() and wpa_ctrl_open2() to allow the
group id to be set even if the process does not have privileges to
change the owner. This is needed for modules that need to communicate
with wpa_supplicant since without the group change, wpa_supplicant may
not have privileges to send the response to a control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-24 13:15:57 +03:00
Jouni Malinen
0e2412d086 Add option to reject authentication on 2.4 GHz from dualband STA
The new no_auth_if_seen_on=<ifname> parameter can now be used to
configure hostapd to reject authentication from a station that was seen
on another radio.

This can be used with enabled track_sta_max_num configuration on another
interface controlled by the same hostapd process to reject
authentication attempts from a station that has been detected to be
capable of operating on another band, e.g., to try to reduce likelihood
of the station selecting a 2.4 GHz BSS when the AP operates both a 2.4
GHz and 5 GHz BSS concurrently.

Note: Enabling this can cause connectivity issues and increase latency for
connecting with the AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Jouni Malinen
ec4387f9c9 Indicate CTRL-EVENT-AUTH-REJECT event on authentication rejection
This allows control interface monitors to get more detailed information
in cases where wpa_supplicant-based SME receives an Authentication frame
with non-zero status code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Jouni Malinen
6ebe816be0 wpa_priv: Add authentication command and event
These are needed to work with nl80211 driver interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 13:21:17 +03:00
Jouni Malinen
06f52b12f9 wpa_priv: Add support for EVENT_SCAN_STARTED
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 12:39:11 +03:00
Manikandan Mohan
4ae7120919 Allow wpa_cli/hostapd_cli client socket directory to be specified
This adds a new helper function wpa_ctrl_open2() that can be used
instead of wpa_ctrl_open() to override the default client socket
directory. Add optional -s<directory path> argument to hostapd_cli and
wpa_cli to allow the client socket directory to be specified.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-01 11:17:43 +03:00
Jouni Malinen
d9c807cab1 Fix key derivation for Suite B 192-bit AKM to use SHA384
While the EAPOL-Key MIC derivation was already changed from SHA256 to
SHA384 for the Suite B 192-bit AKM, KDF had not been updated similarly.
Fix this by using HMAC-SHA384 instead of HMAC-SHA256 when deriving PTK
from PMK when using the Suite B 192-bit AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-27 20:42:14 +03:00
Amit Khatri
6995536fa4 Fix a typo in enum wpa_states comment
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2015-08-08 23:48:33 +03:00
Jouni Malinen
3bc25adbbc Fix PMKID addition to RSN element when RSN Capabilities are not present
This code path could not be hit with the RSNE generated by hostapd or
wpa_supplicant, but it is now possible to reach when using
own_ie_override test functionality. The RSNE and IE buffer length were
not updated correct in case wpa_insert_pmkid() had to add the RSN
Capabilities field.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 19:21:38 +03:00
Andrei Otcheretianski
793ea13e2b Share freq-to-channel conversion function
Add ieee80211_freq_to_channel_ext() conversion function into
ieee802_11_common.c. This function converts freq to channel and
additionally computes operating class, based on provided HT and VHT
parameters.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-08-03 23:55:46 +03:00
Ahmad Kholaif
9baaac2d84 Add parsing of preferred frequency list element
This adds parsing of QCA vendor specific elements and as the first such
element to be parsed, stores pointers to the preferred frequency list
element that can be used to enhance P2P channel negotiation behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:48 +03:00
Jouni Malinen
b43b2b5203 Define new registry for QCA vendor specific elements
The new enum qca_vendor_element_id registry is used to manage
assignments of vendor specific elements using the QCA OUI 00:13:74. The
initial assignment is for the purpose for extending P2P functionality
for cases where the wpa_supplicant implementation is used by both ends
of an exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:47 +03:00
Peng Xu
d0cdccd307 Fix generating offloaded ACS channel list when hw_mode is set to any
When ACS is offloaded to device driver and the hw_mode parameter is set
to any, the current_mode structure is NULL which fails the ACS command.
Fix this by populating the ACS channel list with channels from all bands
when current_mode is NULL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 23:22:24 +03:00
Srinivas Dasari
844dfeb804 QCA vendor command support to set band to driver
Add vendor command to pass SET setband command to the driver and read
the updated channel list from driver when this notification succeeds.
This allows the driver to update its internal channel lists based on
setband configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 21:00:18 +03:00
Max Stepanov
c3ddf2c798 P2PS: Add CPT handling on PD request and response
On PD Request/follow-on PD Request preparation set a feature capability
CPT value of PD context.

On PD Request processing use a request CPT and service advertisement
CPT priority list to select a feature capability CPT of PD Response.

On follow-on PD Request processing use a request CPT and a CPT priority
list in PD context to select a CPT value of follow on PD Response.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Max Stepanov
e2b7fbf2fb P2PS: Add CPT parameter to P2P_SERVICE_ADD asp command
Add Coordination Transport Protocol parameter to P2P_SERVICE_ADD
asp command.

Extend p2ps_advertisement structure to contain CPT priorities
and a supported CPT bitmask.

The format of the new parameter:
    cpt=<cpt>[:<cpt>]

where <cpt> is a name of the Coordination Protocol Transport.
This implementation supports two CPT names: UDP and MAC.
The order of specified CPTs defines their priorities where
the first one has the highest priority.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Ahmad Kholaif
6b0ceee929 Add QCA vendor definitions for multi-port concurrency
Introduce definitions for QCA vendor specific subcommands and attributes
to support multiport concurrency.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-22 11:50:01 +03:00
Ravi Joshi
d71bdfbd83 Add QCA vendor command for updating gateway parameters
Add vendor command for updating gateway parameters to the driver.

Signed-off-by: Ravi Joshi <ravij@qca.qualcomm.com>
2015-07-21 13:20:08 +03:00
Jouni Malinen
9721b083f4 FST: Remove the IE header len/size macros
These are confusing when the style used with the couple of FST IE checks
differs from the rest of hostapd/wpa_supplicant implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:06:48 +03:00
Anton Nayshtut
3794af2dc1 FST: wpa_supplicant control interface
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
659a1605d8 Parsing of multi band element
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
717333f4e4 FST: Add the Fast Session Transfer (FST) module
Fast Session Transfer (FST) is the transfer of a session from a channel
to another channel in a different frequency band. The term "session"
refers to non-physical layer state information kept by a pair of
stations (STAs) that communicate directly (i.e., excludes forwarding).

The FST is implemented in accordance with IEEE Std 802.11ad-2012.

Definitions

 * FST interface - an interface for which FST functionality is enabled
 * FST group - a bunch of FST interfaces representing single
		multi-band STA
 * FST peer - a multi-band capable STA connected
 * FST module - multi-band operation functionality implemented in
		accordance with IEEE Std 802.11ad-2012 (see 10.32
		Multi-band operation) as a part of hostapd/wpa_supplicant
 * FST manager - an external application that implements custom FST
		related logic, using the FST module's interfaces
		accessible via CLI or D-Bus

This commit introduces only the FST module. Integration of the FST
module into the hostapd/wpa_supplicant and corresponding CLI/D-Bus
interfaces and FST related tests are covered in separate commits.

FST manager application is out of scope of these commits.

As FST aggregates a few interfaces into FST group, the FST module uses
global CLI for both commands and notifications. It also exposes
alternative non-interface based D-Bus subtree for this purposes.

Configuration and Initialization

 * FST functionality can enabled by compilation flag (CONFIG_FST)
 * hostapd/wpa_supplicant controlling multiple interfaces are used for
   FST
 * once enabled by compilation, the FST can be enabled for specific
   interfaces in the configuration files
 * FST interfaces are aggregated in FST groups (fst_group_id config file
   entry), where each FST group:
   - represents one multi-band device
   - should have two or more FST interfaces in it
 * priority (fst_priority config file entry) must be configured for each
   FST interface. FST interface with higher priority is the interface FST
   will always try to switch to. Thus, for example, for the maximal
   throughput, it should be the fastest FST interface in the FST setup.
 * default Link Loss Timeout (LLT) value can be configured for each FST
   interface (fst_llt config file entry). It represents LLT to be used
   by FST when this interface is active.
 * FST interfaces advertise the Multi-band capability by including the
   Multi-band element in the corresponding frames

FST CLI commands:

 * fst list_groups - list FST groups configured.
 * fst list_ifaces - list FST interfaces which belong to specific group
 * fst iface_peers - list Multi-Band STAs connected to specific interface
 * fst list_sessions - list existing FST sessions
 * fst session_get - get FST session info
 * fst session_add - create FST session object
 * fst session_set - set FST session parameters (old_iface, new_iface,
                     peer_addr, llt)
 * fst session_initiate - initiate FST setup
 * fst session_respond - respond to FST setup establishemnt attempt by
                         counterpart
 * fst session_transfer - initiate FST switch
 * fst session_teardown - tear down FST Setup but leave the session object
			  for reuse
 * fst session_remove - remove FST session object

FST CLI notifications:
  * FST-EVENT-PEER - peer state changed (CONNECT/DISCONNECT)
  * FST-EVENT-SESSION - FST session level notification with following
                        sub-events:
     - EVENT_FST_SESSION_STATE - FST session state changed
     - EVENT_FST_ESTABLISHED - previously initiated FST session became
                               established
     - EVENT_FST_SETUP - new FST session object created due to FST session
                         negotiation attempt by counterpart

All the FST CLI commands and notifications are also implemented on D-Bus
for wpa_supplicant.

IEEE 802.11 standard compliance

FST module implements FST setup statemachine in compliance with IEEE
802.11ad (P802.11-REVmc/D3.3), as it described in 10.32 Multi-band
operation (see also Figure 10-34 - States of the FST setup protocol).

Thus, for example, the FST module initiates FST switch automatically
when FST setup becomes established with LLT=0 in accordance with
10.32.2.2 Transitioning between states.

At the moment, FST module only supports non-transparent STA-based FST
(see 10.32.1 General).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:15 +03:00
Anton Nayshtut
290078a734 Add IEEE 802.11ad element descriptions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 12:33:29 +03:00
Jouni Malinen
05a90d78dc FT: Allow CCMP-256 and GCMP-256 as group ciphers
The FT-specific check for valid group cipher in wpa_ft_gen_req_ies() was
not up-to-date with the current list of supported ciphers. Fix this by
using a generic function to determine validity of the cipher. In
practice, this adds support for using CCMP-256 and GCMP-256 as the group
cipher with FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
359636170f hw_features: Merge similar return case in check_40mhz_2g4()
There is no need to have separate return statements for these corner
cases that are unlikely to be hit in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
6c7314917b AP: Increase maximum value accepted for cwmin/cwmax
The cwmin/cwmax parameters were limited more than is needed. Allow the
full range (0..15 for wmm_ac_??_{cwmin,cwmax} and 1..32767 for
tx_queue_data?_{cwmin,cwmax}) to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 23:34:49 +03:00
Jouni Malinen
575e4f5d49 SAE: Reject FFC commit-element with value p-1
The current P802.11 description of SAE uses "1 < element < p" as the
required range. However, this is not correct and does not match the
Dragonfly description of "1 < element < p-1". SAE definition will need
to change here. Update the implementation to reject p-1 based on the
correct rule here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 21:20:14 +03:00
Jouni Malinen
0c2b3f6541 SAE: Reject commit-scalar value 1
IEEE Std 802.11-2012 description of SAE does not require this, i.e., it
describes the requirement as 0 < scalar < r for processing the Commit
message. However, this is not correct and will be changes to 1 < scalar
< r to match the Dragonfly description so that a trivial secret case
will be avoided explicitly.

This is not much of an issue for the locally generated commit-scalar
since it would be very unlikely to get the value of 1. For Commit
message processing, a peer with knowledge of the password could
potentially force the exchange to expose key material without this
check.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-27 12:41:40 +03:00
Dmitry Shmidt
4f39908b60 Send CTRL-EVENT-NETWORK-NOT-FOUND if no suitable network was found
This provides more information to upper layer programs on what happens
with connection attempts in cases where the enabled networks are not
found in scan results.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2015-06-27 11:08:08 +03:00
Jouni Malinen
bbb50086e3 SAE: Use random "password" in extra hunting-and-pecking loops
If PWE is discovered before the minimum number of loops (k) is reached,
the extra iterations use a random "password" to further obfuscate the
cost of discovering PWE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-26 22:41:51 +03:00
Jouni Malinen
eb5fee0bf5 SAE: Add side-channel protection to PWE derivation with ECC
This replaces the earlier IEEE Std 802.11-2012 algorithm with the design
from P802.11-REVmc/D4.0. Things brings in a blinding technique for
determining whether the pwd-seed results in a suitable PWE value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-26 22:41:51 +03:00
Jouni Malinen
4584b66eae SAE: Increase security parameter k to 40 based on Dragonfly recommendation
draft-irtf-cfrg-dragonfly recommends implementation to set the security
parameter, k, to a value of at least 40. This will make PWE generation
take significantly more resources, but makes it more likely to hide
timing differences due to different number of loops needed to find a
suitable PWE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-25 20:53:37 +03:00
Jouni Malinen
fdd731bd4a SAE: Fix PWE generation to use minimum loop count (k) properly
The implementation did not match the comment, i.e., only k-1 rounds were
required instead of k.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-25 20:53:37 +03:00
Jouni Malinen
8ec33326c1 SAE: Merge sae_derive_commit() error case return statements
These error cases have the exact same outcome, so a single return
statement can be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
d93abd4a97 SAE: Merge sae_get_rand() error case return statements
These error cases have the exact same outcome, so a single return
statement can be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
6a58444d27 SAE: Verify that own/peer commit-scalar and COMMIT-ELEMENT are different
This check explicitly for reflection attack and stops authentication
immediately if that is detected instead of continuing to the following
4-way handshake that would fail due to the attacker not knowing the key
from the SAE exchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 23:10:36 +03:00
Jouni Malinen
5ed6519625 hw_features: Merge similar return cases
There is no need to have separate return statements for these corner
cases that are unlikely to be hit in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 11:24:52 +03:00
Jouni Malinen
4e37dd6c60 SAE: Simplify sae_prepare_commit() error path
There is no need to keep separate "return -1" statements for these error
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-22 00:38:02 +03:00
Jouni Malinen
efd5d26d33 Remove unnecessary wpa_ie_len check from wpa_parse_wpa_ie_wpa()
There is no need to have a separate "fail silently" case for wpa_ie_len
== 0. That condition does not seem to be reachable and even if it were,
the following "ie len too short" case will result in the exact same
return value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
ce8963fc9f Remove WEP40/WEP104 cipher suite support for WPA/WPA2
As far as IEEE 802.11 standard is concerned, WEP is deprecated, but at
least in theory, allowed as a group cipher. This option is unlikely to
be deployed anywhere and to clean up the implementation, we might as
well remove all support for this combination.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 23:04:31 +03:00
Jouni Malinen
1887be4fa7 Make check_20mhz_bss() static
This is not used outside this file anymore, so there is no need to
export the symbol either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-20 16:05:54 +03:00
Jouni Malinen
a9a4841010 Remove duplicated country code from operating class lists
CA country code was included mistakenly (copy-paste..) in cn_op_class_cc
while it was supposed to be included only in us_op_class_cc. In
practice, this did not result in incorrect operation due to the
us_op_class_cc list being checked first. Anyway, better fix
cn_op_class_cc to avoid confusion here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 17:40:10 +03:00
Jouni Malinen
bbd0bf811e tests: Additional ieee802_11_parse_elems() module test coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 16:47:29 +03:00
Jouni Malinen
41ecd3778d tests: Module test for gas.c corner cases in gas_anqp_set_len()
This increases code coverage for gas.c testing to cover areas that
cannot be reached with pure hwsim test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-14 16:27:21 +03:00
Amr BEN ABDESSALEM
0c9fb14ec4 P2P: Add Operating class 125 for P2P supported channels
Add operating class 125 (channels 149..169) to the list of P2P supported
channels. This allows the 5 GHz channels 161 and 169 to be used for P2P
GO when those channels are allowed for AP mode in the current regulatory
domain.

Signed-off-by: Amr BEN ABDESSALEM <amrx.ben.abdessalem@intel.com>
2015-06-12 20:39:49 +03:00
Peng Xu
3784c0589e Extend hw_mode to support any band for offloaded ACS case
When device supports dual band operations with offloaded ACS, hw_mode
can now be set to any band (hw_mode=any) in order to allow ACS to select
the best channel from any band. After a channel is selected, the hw_mode
is updated for hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-27 12:17:57 +03:00
Sunil Dutt
279724d835 Add QCA vendor subcmd for Link Property Query
Link Property query vendor command shall facilitate the information
of the Wi-Fi link. MAC address of the Wi-Fi peer is given as an input
for querying the link properties.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-07 18:53:23 +03:00
Mikael Kanstrup
8b423edbd3 Declare all read only data structures as const
By analysing objdump output some read only structures were found in
.data section. To help compiler further optimize code declare these
as const.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-04-25 17:33:06 +03:00
Jouni Malinen
f4b64c603e Simplify VHT Operation element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the element is of fixed length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:12 +03:00
Jouni Malinen
d6fefd64d2 Simplify HT Operation element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the element is of fixed length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
40baac0e43 Simplify VHT Capabilities element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the element is of fixed length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
baae4cb9b4 Simplify HT Capabilities element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the element is of fixed length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
b39a05913a Simplify Timeout Interval element parsing
Remove the length field from struct ieee802_11_elems since the only
allowed element length is five and that is checked by the parser.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
e8997b9407 Simplify ERP element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the only allowed element length is one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
f87c99c787 Simplify DSSS Parameter Set element parsing
Check the element length in the parser and remove the length field from
struct ieee802_11_elems since the only allowed element length is one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
ae7a42bde2 FT: Check FT, MD, and Timeout Interval length in the parser
All the existing users of these elements were already validating the
element length. However, it is clearer to validate this already at the
parser for extra layer of protection for any future changes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
a65d7495b5 tests: Add p2p-fuzzer
This program can be used to run fuzzing tests for areas related to P2P
message parsing and processing. p2p-fuzzer allows data files to be used
to inject Probe Response and Action frames for processing by the P2P
module.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 11:44:19 +03:00
Jouni Malinen
6fb761c690 Replace WPA_MAX_SSID_LEN with SSID_MAX_LEN
This makes the source code more consistent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 11:44:18 +03:00
Jouni Malinen
d9d1b9527a Use SSID_MAX_LEN define instead of value 32 when comparing SSID length
This makes the implementation easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
05e46a944a Ignore too long SSID element value in parser
The SSID element is defined to have a valid length range of 0-32. While
this length was supposed to validated by the users of the element
parser, there are not really any valid cases where the maximum length of
32 octet SSID would be exceeded and as such, the parser itself can
enforce the limit as an additional protection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
90758f09ec Mark QCA vendor command id 53 reserved, but not used anymore
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:21:18 +03:00
Jouni Malinen
7f90a234b6 Add QCA vendor subcmd for OCB
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 01:05:52 +03:00
Nick Kralevich
d447cd596f Updates for stricter automatic memcpy bounds checking
Both Android's libc and glibc support _FORTIFY_SOURCE, a compiler
and libc feature which inserts automatic bounds checking into
common C functions such as memcpy() and strcpy(). If a buffer
overflow occurs when calling a hardened libc function, the
automatic bounds checking will safely shutdown the program and
prevent memory corruption.

Android is experimenting with _FORTIFY_SOURCE=3, a new fortify
level which enhances memcpy() to prevent overflowing an element
of a struct. Under the enhancements, code such as

  struct foo {
    char empty[0];
    char one[1];
    char a[10];
    char b[10];
  };

  int main() {
    foo myfoo;
    int n = atoi("11");
    memcpy(myfoo.a, "01234567890123456789", n);
    return 0;
  }

will cleanly crash when the memcpy() call is made.

Fixup hostap code to support the new level. Specifically:

* Fixup sha1_transform so it works with the enhanced bounds checking.
The old memcpy() code was attempting to write to context.h0, but that
structure element is too small and the write was extending (by design)
into h1, h2, h3, and h4. Use explicit assignments instead of
overflowing the struct element.

* Modify most of the structures in ieee802_11_defs.h to use ISO C99
flexible array members (https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html)
instead of a zero length array. Zero length arrays have zero length,
and any attempt to call memcpy() on such elements will always overflow.
Flexible array members have no such limitation. The only element not
adjusted is probe_req, since doing so will generate a compile time error,
and it's not obvious to me how to fix it.

Signed-off-by: Nick Kralevich <nnk@google.com>
2015-04-13 14:01:40 +03:00
Mark Salyzyn
0144ecb8c8 Android: wpa_ctrl missing include for sys/stat.h
wpa_ctrl.c gets sys/stat.h inherited from
private/android_filesystem_config.h it should
not rely on this in the future. The intent is
to move fs_config function into libcutils and
thus deprecate any need for sys/stat.h in this
include file.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2015-04-03 10:47:36 +03:00
Jouni Malinen
a52410c29f Allow PSK/passphrase to be set only when needed
The new network profile parameter mem_only_psk=1 can be used to specify
that the PSK/passphrase for that network is requested over the control
interface (ctrl_iface or D-Bus) similarly to the EAP network parameter
requests. The PSK/passphrase can then be configured temporarily in a way
that prevents it from getting stored to the configuration file.

For example:

Event:
CTRL-REQ-PSK_PASSPHRASE-0:PSK or passphrase needed for SSID test-wpa2-psk

Response:
CTRL-RSP-PSK_PASSPHRASE-0:"qwertyuiop"

Note: The response value uses the same encoding as the psk network
profile parameter, i.e., passphrase is within double quotation marks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-28 11:05:13 +02:00
Ben Greear
0f8385e6fa Show OSEN key management properly in scan results
Old code defaulted to WEP for an AP advertising OSEN. Show as OSEN
instead. Re-use most of the RSN parsing logic since all but the header
is the same.

Example output:

[root@ath9k-f lanforge]# ./local/bin/wpa_cli -i sta0 scan_results
bssid / frequency / signal level / flags / ssid
00:0e:8e:6f:40:49	2462	-23	[OSEN-OSEN-CCMP][ESS]	ben-138

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-03-25 16:04:03 +02:00
Manikandan Mohan
857d94225a Extend offloaded ACS QCA vendor command to support VHT
Update ACS driver offload feature for VHT configuration. In addition,
this allows the chanlist parameter to be used to specify which channels
are included as options for the offloaded ACS case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-23 12:18:05 +02:00
Jouni Malinen
2c50246078 Add a AP mode event message for possible PSK/passphrase mismatch
If the AP/Authenticator receives an EAPOL-Key msg 2/4 for an association
that negotiated use of PSK and the EAPOL-Key MIC does not match, it is
likely that the station is trying to use incorrect PSK/passphrase.
Report this with "AP-STA-POSSIBLE-PSK-MISMATCH <STA addr>" control
interface event.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-19 13:14:21 +02:00
Peter Oh
6128a90979 hostapd: Add channel 140 to allowed HT40 channel pairs
Channel 140 is needed as allowed HT40 channel pair to use
channel 144 introduced in 802.11ac for VHT40 and VHT80.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
2015-03-16 12:03:36 +02:00
Jouni Malinen
8b949804b3 FT: Avoid unnecessary allocation for MIC calculation
Use the vector version of omac1_aes_128() to avoid unnecessary memory
allocation for each FTIE MIC calculation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:18:14 +02:00
Jouni Malinen
18da814be7 The master branch is now used for v2.5 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 19:38:15 +02:00
Jouni Malinen
bc04db9b06 Change version information for the 2.4 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 19:30:39 +02:00
Sunil Dutt
b2329e4ad5 Add QCA vendor subcmd for Data Offload
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-07 19:19:30 +02:00
Jouni Malinen
f2f65dd685 Reserve QCA vendor specific nl80211 commands 61..90
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 15:46:49 +02:00
Ahmad Kholaif
c13578c339 DFS offload: Add main DFS handler for offloaded case
Add handling logic for DFS offloaded case, and add a helper function
that takes the frequency (MHz) as a param and returns 1 if given channel
requires DFS, or 0 otherwise.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:21:30 +02:00
Jouni Malinen
1d747e2a98 Add snr and est_throughput to the BSS entries
These values were previously used only for sorting the scan results, but
it may be useful to provide access to the used values through the BSS
entries.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 11:09:54 +02:00
Janusz Dziedzic
ada157f3b0 Make hostapd_set_freq_params() common
Now this function can also be used from wpa_supplicant.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-02-21 16:07:53 +02:00
Ahmad Kholaif
480994dafb nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events
When DFS offloading capability is supported by the driver, the driver
should use these events to indicate when a radar pattern has been
detected, channel availability check (CAC) has been completed, aborted
or finished after the non-occupancy period is over on a DFS channel.

Also, add a new driver.h event to be used by NL80211 to indicate CAC
Started event on a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:51:33 +02:00
Ahmad Kholaif
e0761c5b4a nl80211: Allocate QCA vendor subcmd for DFS CAC Start event
When DFS offloading capability is supported by the driver, the driver
should use this event to indicate when channel availability check (CAC)
is started on a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:48:36 +02:00
Jouni Malinen
1db718b3ce nl80211: Test vendor command and event
This adds testing code (for CONFIG_TESTING_OPTIONS=y builds only) to
send an nl80211 vendor command and report a test vendor event in case
the driver supports this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:07:29 +02:00
Jouni Malinen
6b00512164 P2P: Add event messages for P2P_CONNECT-fallback-to-GO-Neg
This makes it easier for upper layer programs to follow progress of
P2P_CONNECT-auto operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 13:35:48 +02:00
Masashi Honma
79ddb2062e mesh: Add a monitor event on SAE authentication getting blocked
Send MESH-SAE-AUTH-BLOCKED event if SAE authentication is blocked. The
BLOCK state will finish when a new peer notification event is sent for
the same MAC address.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-02-07 22:33:23 +02:00
Masashi Honma
dd2cbafc89 mesh: Add a monitor event for SAE authentication failure
SAE authentication fails likely with wrong password. This commit adds a
notification of the failure to the upper application (UI) so that the
application can notify suspection of a wrong password to the user. The
control interface monitor even for this is "MESH-SAE-AUTH-FAILURE
addr=<peer>".

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-02-07 22:23:34 +02:00
Krishna Vamsi
5fefce2747 P2PS: Callback to send P2PS provisioning events
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:07 +02:00
Krishna Vamsi
d4b43b5886 P2PS: Add support to send ASP-RESP events
Send P2P-SERV-ASP-RESP events upon receiving GAS responses with
ASP services.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-03 01:35:06 +02:00
Brian Gix
b9348be18e P2PS: Add new P2P identifier assignments from P2P spec v1.5
These will be used for P2P Services.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 14:09:19 +02:00
Jouni Malinen
5e3b5197cc Add Suite B 192-bit AKM
WPA-EAP-SUITE-B-192 can now be used to select 192-bit level Suite B into
use as the key management method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:52 +02:00
Jouni Malinen
98cd3d1c3b Preparations for variable length KCK and KEK
This modifies struct wpa_ptk to allow the length of KCK and KEK to be
stored. This is needed to allow longer keys to be used, e.g., with
Suite B 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:26:49 +02:00
ASHUTOSH NARAYAN
fb09ed3389 Interworking: Notify the ANQP parsing status
The ANQP verification/parsing is done only after the GAS_DONE indication
is sent over the control interface. This means that in case the ANQP
parsing fails there is no indication to the upper layers. Add an
ANQP-QUERY-DONE event that reports the status of the ANQP parsing.

Signed-off-by: ASHUTOSH NARAYAN <ashutoshx.narayan@intel.com>
2015-01-20 02:26:21 +02:00
Jouni Malinen
d07d3fbda2 Add peer certificate alt subject name information to EAP events
A new "CTRL-EVENT-EAP-PEER-ALT depth=<i> <alt name>" event is now used
to provide information about server certificate chain alternative
subject names for upper layers, e.g., to make it easier to configure
constraints on the server certificate. For example:
CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:server.example.com

Currently, this includes DNS, EMAIL, and URI components from the
certificates. Similar information is priovided to D-Bus Certification
signal in the new altsubject argument which is a string array of these
items.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 15:45:18 +02:00
Jouni Malinen
d29fa3a767 Extend VENDOR_ELEM parameters to cover non-P2P Association Request
The new VENDOR_ELEM value 13 can now be used to add a vendor element
into all (Re)Association Request frames, not just for P2P use cases like
the previous item was for.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-14 01:12:56 +02:00
Yanbo Li
e7d0e97bdb hostapd: Add vendor specific VHT extension for the 2.4 GHz band
This allows vendor specific information element to be used to advertise
support for VHT on 2.4 GHz band. In practice, this is used to enable use
of 256 QAM rates (VHT-MCS 8 and 9) on 2.4 GHz band.

This functionality is disabled by default, but can be enabled with
vendor_vht=1 parameter in hostapd.conf if the driver advertises support
for VHT on either 2.4 or 5 GHz bands.

Signed-off-by: Yanbo Li <yanbol@qti.qualcomm.com>
2015-01-14 00:59:22 +02:00
Jouni Malinen
6dfc55723d Remove mesh_ht_mode network block parameter
There should not be a mesh-specific mechanism for setting up channel
parameters since that will just result in duplicated code. IBSS, mesh,
and AP mode can use the same data structures and parameters for setting
up such parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
a828f626af Make check_40mhz_2g4 common
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
fdd989d17a Make check_20mhz_bss common
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
0e550fe496 Make check_40mhz_5g common
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
6d5d098f77 Make get_pri_sec_chan() common
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
514427437a Introduce common allowed_ht40_channel_pair()
This can be used from hostapd/wpa_supplicant.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
269dfe232b Introduce common hw features
Introduce wpa_supplicant/hostapd hw features.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Bob Copeland
f3b8ad4d78 SAE: Implement retransmission timer
Add the t0 retransmission timer as specified by IEEE Std 802.11-2012,
11.3.8.4. This makes SAE much more likely to succeed in the case of lost
frames.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2015-01-10 17:35:52 +02:00
Jouni Malinen
4e70bbf1c6 SAE: Clear keys from memory on disassociation
There is no need to keep temporary keys in memory beyond the end of the
association, so explicitly clear any SAE buffers that can contain keys
as soon as such keys are not needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 20:00:02 +02:00
Jouni Malinen
36f0cf3774 privsep: Fix compilation due to associate() parameter updates
struct wpa_driver_associate_params moved to using struct
hostapd_freq_params instead of just frequency. Need to update wpa_priv
to do same.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
9ae52e7034 Clean up VHT configuration validation
There is no need to use runtime call to find_first_bit() to determine
shift amount for a constant integer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 19:00:38 +02:00
Jouni Malinen
b0f33467a5 Clean up VHT override max A-MPDU override calculation
There is no need to use runtime call to find_first_bit() to determine
shift amount for a constant integer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 18:48:59 +02:00
Jouni Malinen
72c5c289fb Add text names for number of the key_mgmt values
This completes STATUS command key_mgmt output for the missing values,
like SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-12 13:40:07 +02:00
Chet Lanctot
15badebd47 nl80211: Add QCA vendor specific query of device/driver features
This commit introduces a QCA vendor command that allows interrogation of
the vendor-specific features supported by the device/driver. Currently
the only defined feature is the ability to offload key management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 21:08:21 +02:00
Jouni Malinen
1f102d3bb0 Check os_snprintf() result more consistently - manual
This converts os_snprintf() result validation cases to use
os_snprintf_error() for cases that were note covered by spatch and
semantic patches.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
89b48f7b95 Use os_zalloc() instead of os_malloc() and os_memset()
Automatically updated with spatch and the following semantic patch:

@@
expression X;
expression E1;
statement S;
@@

- X = os_malloc(E1);
+ X = os_zalloc(E1);
(
  if (X == NULL) {
	...
  }
- os_memset(X, 0, E1);
|
  if (X == NULL)
	S
- os_memset(X, 0, E1);
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Peng Xu
16689c7cfc hostapd: Allow ACS to be offloaded to the driver
Using QCA vendor command, allow ACS function to be offloaded to the
driver. Once channels are selected, hostapd is notified to perform OBSS
operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-03 22:31:53 +02:00
Jouni Malinen
994d6f4629 Add a name for an assigned QCA nl80211 vendor subcmd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-02 23:36:12 +02:00
Jouni Malinen
e48635cfb0 Rename QCA nl80211 vendor subcmds to match AOSP names
This makes the enum vendor_subcmds definitions more consistent with the
names used in Android.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-02 16:20:35 +02:00
Masashi Honma
a959a3b69d SAE: Fix Anti-Clogging Token request frame format
This commit inserts Finite Cyclic Group to Anti-Clogging Token request
frame because IEEE Std 802.11-2012, Table 8-29 says "Finite Cyclic Group
is present if Status is zero or 76".

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-25 16:08:53 +02:00
Masashi Honma
872b754512 mesh: Fix SAE anti-clogging functionality for mesh
The mesh anti-clogging functionality is implemented partially. This
patch fixes to parse anti-clogging request frame and use anti-clogging
token.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-25 15:33:04 +02:00
Jouni Malinen
649c0a6974 WPA: Use more explicit WPA/RSN selector count validation
Some static analyzers had problems understanding "left < count * len"
(CID 62855, CID 62856), so convert this to equivalent "count > left /
len" (len here is fixed to 4, so this can be done efficiently).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 21:08:13 +02:00
Jouni Malinen
46a0352589 Use more explicit num_pmkid validation in RSN IE parsing
Static analyzers may not have understood the bounds checking on
data->num_pmkid. Use a local, temporary variable and validate that that
value is within length limits before assining this to data->num_pmkid to
make this clearer. (CID 62857, CID 68126)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 21:03:29 +02:00
Andrei Otcheretianski
70d1e72849 wpa_supplicant: Handle link measurement requests
Send link measurement response when a request is received. Advertise
only RCPI, computing it from the RSSI of the request. The TX power field
is left to be filled by the driver. All other fields are not published.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-22 21:45:07 +02:00
Assaf Krauss
f4b8bfae15 wpa_supplicant: Add NEIGHBOR_REP_REQUEST command to the control interface
Add NEIGHBOR_REP_REQUEST command to the wpa_supplicant ctrl_iface.
This command triggers the sending of a Neighbor Report Request to the
associated AP.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:28:52 +02:00
Assaf Krauss
d89c0701db wpa_supplicant: Add support for Neighbor Report
Add the ability to send a Neighbor Report Request (part of
RRM). Requester is then notified once the report arrives.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:23:14 +02:00
Assaf Krauss
b361d580ec SME: Add RRM support to association request
In case the AP we are associating with advertises support for RRM,
advertise our own RRM support in the (Re)Association Request frame. This
is done by adding an RRM Capabilities IE. The underlying driver is
expected to further add a Power Capabilities IE to the request, and set
the Radio Measurement flag in the Capability Info field. At this point
the RRM Capabilities IE advertises no measurement support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:13:45 +02:00
Jouni Malinen
533630625d Add generic operating class and channel to frequency function
ieee80211_chan_to_freq() is a generic function that replaces and extends
the previous P2P-specific p2p_channel_to_freq(). The new function
supports both the global operating class table as well as the additional
US, EU, JP, and CN operating class tables.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
5351480047 Add BSS-TM-RESP ctrl_iface event
This event allows external monitors to track STA response to BSS
Transition Management Request.

BSS-TM-RESP <STA addr> status_code=<#> bss_termination_delay=<#>
[target_bssid=<BSSID>]

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 16:34:34 +02:00
Jouni Malinen
37df6a87dd Add names for assigned QCA nl80211 vendor subcmds
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 21:46:01 +02:00
Jouni Malinen
066371ad52 Reserve QCA vendor specific nl80211 commands 53
These is reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-20 20:36:59 +02:00
Ilan Peer
38cb0a2db6 AP: Drop retransmitted auth/assoc/action frames
It is possible that a station device might miss an ACK for an
authentication, association, or action frame, and thus retransmit the
same frame although the frame is already being processed in the stack.
While the duplicated frame should really be dropped in the kernel or
firmware code where duplicate detection is implemented for data frames,
it is possible that pre-association cases are not fully addressed (which
is the case at least with mac80211 today) and the frame may be delivered
to upper layer stack.

In such a case, the local AP will process the retransmitted frame although
it has already handled the request, which might cause the station to get
confused and as a result disconnect from the AP, blacklist it, etc.

To avoid such a case, save the sequence control of the last processed
management frame and in case of retransmissions drop them.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-19 15:20:47 +02:00
Moshe Benji
d1f880013a WMM AC: Handle TSPEC action frames
Add the TSPEC to the driver on successful TSPEC ADDTS response. Delete
the TSPEC when receiving DELTS action.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:07:08 +02:00
Moshe Benji
a0413b1734 WMM AC: Parse WMM IE on association
Initialize WMM AC data structures upon successful association
with an AP that publishes WMM support, and deinitialize the data
structure when the association is no longer valid.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:47:34 +02:00
Masashi Honma
790709060d mesh: Add scan result for mesh network
Android 4.4 uses "BSS" command instead of "SCAN_RESULT" command.
So this patch add the mesh scan result for BSS command.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-11-16 19:43:11 +02:00
Javier Lopez
603a3f34c4 Add mesh_group_{add,remove} control interface commands
Parse MESH_GROUP_ADD/REMOVE commands on ctrl interface and call
wpa_supplicant routines. These commands are used to start or
join and leave a mesh network.

The mesh id is given in the configuration file, therefore there is
no need to scan before joining a mesh network. We reuse the
connect_without_scan construct used by P2P for that same purpose.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-16 19:43:11 +02:00
Jason Mobarak
5cfb672dde mesh: Enable mesh HT mode
Add a new option "mesh_ht_mode" that specifies the HT mode for the
mesh, with this option on, mesh beacons, actions frames, and probe
responses with include the appropriate HT information elements.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-16 19:43:11 +02:00
Jouni Malinen
929a2ea5df Suite B: Select EAPOL-Key integrity and key-wrap algorithms based on AKM
This adds support for AKM 00-0F-AC:11 to specify the integrity and
key-wrap algorithms for EAPOL-Key frames using the new design where
descriptor version is set to 0 and algorithms are determined based on
AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
087a1f4efd Suite B: PMKID derivation for AKM 00-0F-AC:11
The new AKM uses a different mechanism of deriving the PMKID based on
KCK instead of PMK. hostapd was already doing this after the KCK had
been derived, but wpa_supplicant functionality needs to be moved from
processing of EAPOL-Key frame 1/4 to 3/4 to have the KCK available.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Dmitry Shmidt
d10792199e Add CTRL-EVENT-SCAN-FAILED notification in case of scan failure
This is needed since the SCAN command with radio work returns before the
actual driver operation to trigger a scan has been executed and as such,
cannot return result of that operation.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-11-15 11:03:52 +02:00
Jouni Malinen
41a233572e Assign QCA vendor specific nl80211 command id 52 for APFIND
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-13 16:27:23 +02:00
Jouni Malinen
ab93fdebf1 hostapd: Add INTERFACE-ENABLED and INTERFACE-DISABLED events
These can be convenient for upper layer programs to determine if the
hostapd interface gets disabled/re-enabled, e.g., due to rfkill
block/unblock.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 10:52:54 +02:00
Bob Copeland
5f92659d88 mesh: Add mesh peering manager
The mesh peering manager establishes and maintains links among
mesh peers, tracking each peer link via a finite state machine.

This implementation supports open mesh peerings.

[assorted fixes from Yu Niiro <yu.niiro@gmail.com>]
[more fixes from Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-hostap: Bob Copeland <me@bobcopeland.com>
2014-10-25 17:45:31 +03:00
Bob Copeland
7c7e7877fc nl80211: Add plink_action_field to hostapd_sta_add_params
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:38 +03:00
Chet Lanctot
b41f26845a Add support for offloading key management operations to the driver
This commit introduces a QCA vendor command and event to provide an
option to use extended versions of the nl80211 connect/roam operations
in a way that allows drivers to offload key management operations to the
driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 18:38:50 +03:00
Bob Copeland
6293f9ed07 mesh: Parse mesh-related information elements
Add support for parsing mesh id, mesh config, mesh peering,
AMPE and MIC information elements.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 11:20:05 +03:00
Thomas Pedersen
3e7b032f83 mesh: Add mesh protocol definitions
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-hostap: Thomas Pedersen <thomas@noack.us>
2014-10-19 11:20:05 +03:00
Toby Gray
3cea004d3c Make wpa_ctrl_get_remote_ifname declaration conditional.
The definition of wpa_ctrl_get_remote_ifname is conditional on
CONFIG_CTRL_IFACE_UDP. This change makes the header declaration of
this function also conditional on the same define.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-12 16:51:02 +03:00
Jouni Malinen
51465a0b5c The master branch is now used for v2.4 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-09 20:36:53 +03:00
Jouni Malinen
724fce8fff Change version information for the 2.3 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-09 17:41:31 +03:00
Jouni Malinen
d5fe4e6c18 Reserve QCA vendor specific nl80211 commands 34..49
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-07 20:08:47 +03:00
Jouni Malinen
43f02e6ad7 wpa_ctrl: Update wpa_ctrl_recv() documentation for non-block behavior
Commit 4fdc8def88 changed the wpa_ctrl
socket to be be non-blocking, so the comment about wpa_ctrl_recv()
blocking is not valid anymore.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 18:32:57 +03:00
Jouni Malinen
0800f9ee6c nl80211: Add roaming policy update using QCA vendor command
This allows updating roaming policy for drivers that select the BSS
internally so that wpa_supplicant (based on bssid parameter
configuration) and the driver remain in sync.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
6c460eaf7e Add RSN cipher/AKM suite attributes into RADIUS messages
This adds hostapd support for the new WLAN-Pairwise-Cipher,
WLAN-Group-Cipher, WLAN-AKM-Suite, and WLAN-Group-Mgmt-Pairwise-Cipher
attributes defined in RFC 7268. These attributes are added to RADIUS
messages when the station negotiates use of WPA/RSN.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-31 19:55:29 +03:00
Jouni Malinen
71a0e395b9 P2P: Make unrecognized vendor elements available in P2P_PEER
This allows external programs to use vendor specific information from
P2P peers without wpa_supplicant having to be able to parse and
understand all such vendor specific elements.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-08 15:57:30 +03:00
Jouni Malinen
86bd36f0d5 Add generic mechanism for adding vendor elements into frames
This adds following new control interface commands to allow arbitrary
vendor elements to be added into number of frames:

VENDOR_ELEM_ADD <frame id> <hexdump of elem(s)>
VENDOR_ELEM_GET <frame id>
VENDOR_ELEM_REMOVE <frame id> <hexdump of elem(s)>
VENDOR_ELEM_REMOVE <frame id> *

The following frames are supported in this commit (additional frames can
be added in the future):

0 = Probe Request frame in P2P device discovery
1 = Probe Response frame from P2P Device role
2 = Probe Response frame from P2P GO
3 = Beacon frame from P2P GO
4 = PD Req
5 = PD Resp
6 = GO Neg Req
7 = GO Neg Resp
8 = GO Neg Conf
9 = Invitation Request
10 = Invitation Response
11 = P2P Association Request
12 = P2P Association Response

One or more vendor element can be added/removed with the commands. The
hexdump of the element(s) needs to contain the full element (id, len,
payload) and the buffer needs to pass IE parsing requirements to be
accepted.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-07 12:25:09 +03:00
Jouni Malinen
0233dcac5b SAE: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:48 +03:00
Pontus Fuchs
dedfa440ed Print frame type name in debug output
"stype=4" becomes "stype=4 (WLAN_FC_STYPE_PROBE_REQ)" etc.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:51:39 +03:00
Jouni Malinen
2a57c33e25 Reserve QCA vendor specific nl80211 commands 20..33
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-05 17:03:17 +03:00
Amar Singhal
84df167554 nl80211: Add vendor attribute for interface index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-05 16:57:52 +03:00
Jouni Malinen
9949483c2f The master branch is now used for v2.3 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-05 00:51:02 +03:00
Jouni Malinen
b63b9a7bc9 Change version information for the 2.2 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-04 16:09:59 +03:00
Jouni Malinen
13c330385a SAE: Fix memory leak in random number generation
If the randomly generated bignum does not meet the validation steps, the
iteration loop in sae_get_rand() did not free the data properly. Fix the
memory leak by freeing the temporary bignum before starting the next
attempt at generating the value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 22:24:31 +03:00
Jouni Malinen
2d2dd488be tests: Add module tests for src/common
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-28 00:56:13 +03:00
Jouni Malinen
74879f320d Remove extra newline from a debug print
"Unknown WFA information element ignored" debug message had an extra
newline at the end.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-27 23:39:46 +03:00
Jouni Malinen
2396f02a43 Reserve QCA vendor specific nl80211 commands 14..19
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-22 16:29:48 +03:00
Jithu Jance
8802326ff9 nl80211: Indicate SHA256-based AKM suites in CONNECT/ASSOCIATE
Previously, the NL80211_ATTR_AKM_SUITES was skipped if either of these
SHA256-based AKMs was negotiated.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-05-21 23:48:00 +03:00
Jouni Malinen
dbd1e184e3 tests: TNC testing
This implements minimal IMC and IMV to allow TNC testing with PEAP (SoH)
and TTLS/FAST with EAP-TNC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Jouni Malinen
0a626a5060 TNC: Move common definitions into a shared header file
No need to duplicate these in multiple places.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Hu Wang
4e9528cce3 MACsec: Add common IEEE 802.1X definitions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:05:28 +03:00
Hu Wang
3bcfab8794 MACsec: Add define for EAPOL type MKA
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:05:28 +03:00
Hu Wang
0836c04b30 MACsec: Allow EAPOL version 3 to be configured
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:05:28 +03:00
Peng Xu
9c47f6a2a6 hostapd: Extend support for HT 20/40 coexistence feature
Extend the minimal HT 20/40 co-ex support to include dynamic changes
during the lifetime of the BSS. If any STA connects to a 2.4 GHz AP with
40 MHz intolerant bit set then the AP will switch to 20 MHz operating
mode.

If for a period of time specified by OBSS delay factor and OBSS scan
interval AP does not have any information about 40 MHz intolerant STAs,
the BSS is switched from HT20 to HT40 mode.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:09 +03:00
Jouni Malinen
a26582cb98 Make qca-vendor.h independent of other header files
Move the definitions that depended in common.h into a separate header
file so that qca-vendor.h can be copied and used as-is in other
projects.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 11:41:36 +03:00
Amar Singhal
4a64d5a9db nl80211: Allocate QCA vendor subcmd for extended statistics
This allocates a QCA vendor subcmd for extended statistics
functionality and also an attribute for delivering the payload
for extended statistics.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 11:36:11 +03:00
Johannes Berg
30476e4fe7 wlantest: Tag and ignore generated packets
Rather than ignoring packets with a minimal 8-byte radiotap
header, which may occur elsewhere, tag generated (decrypted)
packets with an empty vendor namespace tag and ignore those.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:54:25 +03:00
Jouni Malinen
142817b2f9 Add a wpa_supplicant ctrl_iface event for regdom changes
CTRL-EVENT-REGDOM-CHANGE event provides an external notification of
regulatory domain (and any driver channel list) changes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 16:32:38 +03:00
Jouni Malinen
0cd860284c Add CTRL-EVENT-SIGNAL-CHANGE for bgscan signal update events
This allows external programs to monitor driver signal change events
through wpa_supplicant when bgscan is used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:52 +03:00
Jouni Malinen
1aa6f953bb WNM: Fix neighbor report subelement parser
Only the Neighbor Report element should be included here, so verify that
the element id matches. In addition, verify that each subelement has
valid length before using the data.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-08 01:01:55 +03:00
Jouni Malinen
5583b8d1eb Document and rename HT Capability/Operation fields
This makes the definitions match the terminology used in IEEE Std
802.11-2012 and makes it easier to understand how the HT Operation
element subfields are used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-07 22:45:11 +03:00
Jouni Malinen
1dde5b5cdd Remove PSMP option from ht_capab
This was used to fill in the "PSMP support" subfield that was defined
during P802.11n development. However, this subfield was marked reserved
in the published IEEE Std 802.11n-2009 and it is not supported by
current drivers that use hostapd for SME either. As such, there is not
much point in maintaining this field as ht_capab parameter within
hostapd either.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-07 22:02:14 +03:00
Amarnath Hullur Subramanyam
4a16a0bd55 nl80211: Add QCA vendor subcmd for NAN
QCA vendor extension is used for NAN functionality. This defines the
subcommand and attribute to address this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-07 17:13:08 +03:00
Jouni Malinen
1619e9d512 Interworking: Add ctrl_iface events on cred block modifications
Following events are now sent to ctrl_iface monitors to indicate if
credential blocks have been added, modified, or removed:

CRED-ADDED <id>
CRED-MODIFIED <id> <field>
CRED-REMOVE <id>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-04 19:10:47 +03:00
Jouni Malinen
163f801ef2 nl80211: Indicate HS 2.0 OSEN AKM in connect/associate command
This allows drivers that build the WPA/RSN IEs internally to use similar
design for building the OSEN IE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Amar Singhal
65d645ce43 nl80211: Fetch DFS offload capability from driver
This uses a QCA vendor extension to determine if the driver supports
fully offloaded DFS operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-22 21:20:32 +02:00
Jouni Malinen
8dd9f9cdde Allow management group cipher to be configured
This allows hostapd to set a different management group cipher than the
previously hardcoded default BIP (AES-128-CMAC). The new configuration
file parameter group_mgmt_cipher can be set to BIP-GMAC-128,
BIP-GMAC-256, or BIP-CMAC-256 to select one of the ciphers defined in
IEEE Std 802.11ac-2013.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-14 21:58:45 +02:00
Jouni Malinen
91728f2f12 Add wpa_ctrl helper functions for upper level functionality
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-12 01:09:21 +02:00
Bartosz Markowski
905828fea4 hostapd: Fix vht_capab 'Maximum A-MPDU Length Exponent' handling
As per IEEE Std 802.11ac-2013, 'Maximum A-MPDU Length Exponent' field
value is in the range of 0 to 7. Previous implementation assumed EXP0 to
be the maximum length (bits 23, 24 and 25 set) what is incorrect.

This patch adds options to set it up within the 0 to 7 range.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
2014-03-06 00:09:37 +02:00
Jouni Malinen
8a4ce28000 WPA: Clean up cipher suite counting in write routines
There is no need to maintain a separate counter for this in addition to
the pointer to the current location. In addition, this gets rid of
warnings about unused variable write.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:12 +02:00
Jouni Malinen
749fa140ff Debug print trailing WPA/RSN IE bytes, if any
This silences a never-used analyzer warning in addition to making the
debug log entry somewhat more useful.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:12 +02:00
Jouni Malinen
2af4d87fc3 GAS: Fix additional comeback delay with status code 95
The special case of non-zero status code used in a GAS Comeback Response
frame to indicate that additional delay is needed before the response is
available was not working properly. This case needs to allow the status
code check to be bypassed for the comeback case prior to having received
any response data.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-01 17:06:20 +02:00
Jouni Malinen
76a55a8e12 HS 2.0R2: Add more debug to network selection
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
28f2a7c407 HS 2.0R2: Allow excluded network to be selected based on user override
Move excluded SSID filtering step to the end of credential validation
process and return list of BSSes that would otherwise have matching
credentials, but have an excluded SSID. Automatic network selection will
not select such a network, but interworking_connect command can be used
to pick excluded networks.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
a5d75636f9 HS 2.0R2: Add common OSEN definitions
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
1d2215fc67 HS 2.0R2: Add OSU Providers list ANQP element
wpa_supplicant can now request OSU Providers list with "hs20_anqp_get
<BSSID> 8".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
184e110caf HS 2.0R2: Add Icon Request and Icon binary File ANQP elements
wpa_supplicant can request OSU icon data with "hs20_icon_request <BSSID>
<icon filename>". This transmits an Icon Request ANQP element and
processes the response in Icon Binary File ANQP elements.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
7ef6947993 HS 2.0R2: Add STA support for Deauthentication Request notification
If requested, disable the network based on the HS 2.0 deauthentication
request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
95a3ea9426 HS 2.0R2: Add WNM-Notification Request for Subscription Remediation
Subscription remediation notification WNM-Notification Request is now
shown in the following way in wpa_supplicant control interface:
<3>HS20-SUBSCRIPTION-REMEDIATION http://example.com/foo/

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
f9cd147d6b HS 2.0R2: Update Indication element to Release 2
The HS 2.0 Indication element from wpa_supplicant now includes the
release number field and wpa_supplicant shows the release number of the
AP in STATUS command (hs20=1 replaced with hs20=<release>).

The new update_identifier field in the cred block can now be used to
configure the PPS MO ID so that wpa_supplicant adds it to the Indication
element in Association Request frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:22 +02:00
Janusz Dziedzic
4db216fcf7 wpa_supplicant: Add support for IPv6 with UDP ctrl_iface
Add IPv6 support when using udp/udp-remote control interface using the
following new build configuration options:

CONFIG_CTRL_IFACE=udp6
CONFIG_CTRL_IFACE=udp6-remote

This is useful for testing, while we don't need to assign IPv4 address
(static or using DHCP) and can just use auto configured IPv6 addresses
(link local, which is based on the MAC address). Also add scope id
support for link local case.

For example,
./wpa_cli
./wpa_cli -i ::1,9877
./wpa_cli -i fe80::203:7fff:fe05:69%wlan0,9877

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-02-25 16:43:01 +02:00
Marek Kwaczynski
8a45811638 hostapd: Add Operating Mode Notification support
Handle Operating Mode Notification received in (Re)Association Request
frames.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2014-02-14 19:30:05 +02:00
Jouni Malinen
b64afe22aa Fix SAE state validation on AP
Confirm-before-commit validation step allowed execution to continue on
error case. This could result in segfault in sae_check_confirm() if the
temporary SAE data was not available (as it would not be, e.g., in case
of an extra SAE confirm message being received after successful
exchange). Fix this by stopping SAE processing immediately after
detecting unexpected state for confirm message. In addition, make the
public sae.c functions verify sae->tmp before dereferencing it to make
this type of bugs less likely to result in critical issues.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-12 17:46:33 +02:00
Jouni Malinen
e8a1572532 The hostap.git master branch is now used for 2.2 development
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 16:10:44 +02:00
Jouni Malinen
93ee3022dc Change version information for the 2.1 release
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:23:35 +02:00
Jouni Malinen
59b45d1afe P2P NFC: Add processing of P2P client while NFC handover case
Instead of automatically triggering a connection, provide an indication
of one of the devices being a P2P client to upper layers to allow user
to determine what to do next.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:30 +02:00
Jouni Malinen
74df9ecd4a P2P NFC: Do not try to join peer if both devices are already GO
Send a P2P-NFC-BOTH-GO event to upper layers to determine what to
do in case both devices going through NFC connection handover are
already operating as a GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:30 +02:00
Jouni Malinen
25ef8529c1 P2P: Add support for IP address assignment in 4-way handshake
This new mechanism allows P2P Client to request an IPv4 address from the
GO as part of the 4-way handshake to avoid use of DHCP exchange after
4-way handshake. If the new mechanism is used, the assigned IP address
is shown in the P2P-GROUP-STARTED event on the client side with
following new parameters: ip_addr, ip_mask, go_ip_addr. The assigned IP
address is included in the AP-STA-CONNECTED event on the GO side as a
new ip_addr parameter. The IP address is valid for the duration of the
association.

The IP address pool for this new mechanism is configured as global
wpa_supplicant configuration file parameters ip_addr_go, ip_addr_mask,
ip_addr_star, ip_addr_end. For example:

ip_addr_go=192.168.42.1
ip_addr_mask=255.255.255.0
ip_addr_start=192.168.42.2
ip_addr_end=192.168.42.100

DHCP mechanism is expected to be enabled at the same time to support P2P
Devices that do not use the new mechanism. The easiest way of managing
the IP addresses is by splitting the IP address range into two parts and
assign a separate range for wpa_supplicant and DHCP server.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:26 +02:00
Jouni Malinen
9e323a24cd P2P NFC: Add OOB GO Negotiation Channel attribute
Add definition and helper functions for the new OOB GO Negotiation
Channel attribute.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Arif Hussain
253f2e3795 P2P: Apply unsafe frequency rules to available channels
This adds a QCA vendor specific nl80211 event to allow the driver to
indicate a list of frequency ranges that should be avoided due to
interference or possible known co-existance constraints. Such
frequencies are marked as not allowed for P2P use to force groups to be
formed on different channels.

If a P2P GO is operating on a channel that the driver recommended not to
use, a notification about this is sent on the control interface and
upper layer code may decide to tear down the group and optionally
restart it on another channel. As a TODO item, this could also be changed
to use CSA to avoid removing the group.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 11:49:05 +02:00
Jouni Malinen
1682c62360 Add a header file defining QCA OUI and vendor extensions
This file is used as a registry of identifier assignments from the
Qualcomm Atheros OUI 00:13:74 for purposes other than MAC address
assignment. One of the first uses will be for nl80211 vendor
commands/events which is reason for the preparation change in
driver_nl80211.c

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-24 15:58:00 +02:00
Jouni Malinen
e24fe94126 Add definitions for Protected Dual of Public Action frames
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:19:55 +02:00
Sunil Dutt
3ed97271ba TDLS: Pass peer's Supported channel and oper class info during sta_add
The information of the peer's supported channel and operating class
is required for the driver to do TDLS off channel operations with a
compatible peer. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-14 17:24:33 +02:00
Jouni Malinen
1f965e622a Allow external programs to request wpa_radio work items
The new control interface command RADIO_WORK can be used by external
programs to request radio allocation slots from wpa_supplicant if
exclusive radio control is needed, e.g., for offchannel operations. If
such operations are done directly to the driver, wpa_supplicant may not
have enough information to avoid conflicting operations. This new
command can be used to provide enough information and radio scheduling
to avoid issues with such cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:10 +02:00
Jouni Malinen
c64e3a08a9 P2P: Send received Presence Response information to ctrl_iface monitors
The P2P_PRESENCE_REQ command did not give any easily available
indication of the response received from the GO. Make this more useful
by providing such response (if received) as a ctrl_iface monitor event
(P2P-PRESENCE-RESPONSE).

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 18:44:44 +02:00