This was derived from
else if (c1 == "" && n2) return true; // true implies c1 < n2
However, this has no effect since Word always looses out against Number
anyways and the `pre` rules are also unaffected by this change – since
this only affects comparison of an empty Word part with a Number.
Change-Id: Ia04e42ac726352b688c87674b0fdb355f06edbcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6722
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This asserts the not-quite lexicographical property of the comparison.
Change-Id: Iad68081e4b3a7106513f479643de87065dc47739
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6721
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is necessary because builtins.compareVersions compares versions in
a subtly not-quite-but-still-lexicographical way: `pre` for example can
have an effect if it is post-fixed: `2.3 < 2.3pre`. This is a violation
of the rule that in a lexicographical ordering, the longer string is
considered greater if they are otherwise equal. builtins.compareVersion
is comparing lexicographically though, if you do the following
transformation beforehand:
2.3 --split--> [ "2" "3" ] --append--> [ "2" "3" "" ]
2.3pre --split--> [ "2" "3" "pre" ] --append--> [ "2" "3" "pre" "" ]
Comparing the transformed version is then done lexicographically:
2.3 < 2.3.0pre since [ "2" "3" "" ] < [ "2" "3" "0" "pre" ]
Here, the `pre` rule never comes into effect because no comparison on it
happens, instead we use the longer string rule of a lexicographical
comparison.
In the C++ codebase, the reason for this behavior is that the
iterator-esque construct they use always yields the empty string before
it exposes it has been fully consumed. This is probably intentional to
support the postfixed `pre` which is, for example, used by NixOS
versions (e.g. unstable post 22.05 is 22.11-pre). We replicate this
behavior using the `Chain` iterator in `VersionPartsIter::new_for_cmp`.
Change-Id: I021c69aa27b0b7deb949dffe50ed18b6de3a7b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6720
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is based on the [relevant code] in C++ Nix. Our version has more
branches because the C++ one only checks if it is less than or not, so
can save handling a few cases. We on the other hand, can avoid calling
the algorithm twice. It'd be nice to implement proptests for this in the
future and to make sure that this weird little algorithm doesn't violate
the Ord laws.
[relevant code]: cd35bbbeef/src/libstore/names.cc (L81-L94)
Change-Id: I46642e6da5eac7c0883cdce860622cdba04cd12b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6719
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This was fairly easy, thanks to the work already done by Thomas Frank.
However, the implementation is suboptimal because we parse number parts
only to convert them back to strings afterwards. I've chosen to tackle
this problem in the future, since having an (inefficient) implementation
of splitVersion will be helpful for debugging the slight discrepancies
between C++ Nix and Tvix in the case of compareVersions.
Change-Id: Id6ed8eeb77663ff650c8c53ea952875b1fb7ea84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6688
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This makes it possible to call a callable value (builtin or
closure/lambda) directly, without unwrapping it first. This is needed
for pretty much all higher-order functions to work correctly.
This is mostly equivalent to the previous code in coerce_to_string for
calling `__toString`, except it expects the argument(s) to already be
placed on the stack.
Note that the span for the `NotCallable` error is not currently
guaranteed to make any sense, will experiment with this.
Change-Id: I821224368d438a28900858b343defc1817e46a0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6717
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Generate smaller recursive values for generated Values, and run fewer
cases for the attrs proptests which are particularly egregious.
Change-Id: Ia35c7c120270feaf045be1deb440c87ebb185c27
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6716
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As we already have a VM passed to the builtins, we can simply execute
the provided closure/lambda in it for each value.
The primary annoyance with this is that we have to clone the upvalues
for each element, but we can try making this cheaper in the
future (it's also a general problem in the VM itself).
Change-Id: I5bcf56d58c509c0eb081e7cf52f6093216451ce4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6714
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Previously we only matched the outer constructor after forcing which
would mean that we would always return `false` if the inspected value
was a thunk, regardless what value would be present inside.
Change-Id: I361ea6e855e23ef8e5b59098a50b9cd59253803f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6692
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, this would almost always crash because list items are
thunked more often nowadays and selecting from a thunk would fail. Also
we no longer pop from args, accessing it by index should avoid an
unnecessary clone here.
Change-Id: I4410c4c2e28cc255a2c7cf2a5322db3d2c556a0e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6693
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
And insert the missing newline the C++ Nix test script needs.
Change-Id: I04ddd7268f9caa1414fd23314c281bb7c1e854cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6689
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of arity, we pass a array reference to Builtin::new that
describes how many arguments there are and which of them need to be
forced, eliminating the need to force manually.
Note that this change doesn't fix some of the instances where the the
Builtin doesn't consider that the value could be a Thunk.
Change-Id: Iadb58bb79886c30dc6b09dcf0ffad8abf28036a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6662
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
TL;DR:
- support `builtins.tail`
- define `ErrorKind::TailEmptyList` and canonical error code
- support basic unit tests
Unsure whether or not the error should be a dedicated `ErrorKind`...
Change-Id: Iae90fda1bb21ce7bdb1aaa2aeb2b8c1e6dcb0f05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6545
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Refactor the `force!` macro to a method on `Value` which returns a
smart-pointer-esque type, which simplifies the callsite and eliminates
rightward drift, especially for high-arity builtins.
Change-Id: I97a7837580accfb4bbd03b24f2acdbd38645efa5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6656
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Previously only the first one was guaranteed to be forced, but we need
to do this for all of them.
Fixes b/190
Change-Id: I76b5667dbfb2f3fde3587e7b91d268cbf32aca00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6645
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Document the OpAttrs op, paying special attention to the (perhaps
confusing) behavior of taking the number of *pairs*, not the number
of *values*, which will be popped off the stack into the resulting attr
set.
Change-Id: I64df0290308ecae7a5c7e14ead37091d32701507
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6654
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Refactor the environment variable and argument parsing for the tvix repl
to use Clap instead of doing things ad-hoc, and thread through options
obtained from environment variables via explicit arguments rather than
obtaining them from the environment as they're needed. This makes adding
more flags more sustainable, and also makes the binary fully
self-documenting, including supported env vars, via `--help`.
Change-Id: Ib1f6a0cd20056e8c9196760ff755fa5729667760
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6653
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Thunks might be encountered deep in equality comparison (eg nested
inside a list or attr-set), at which point we need to force them in
order to compare them for equality (or else we panic when trying to get
at their value).
Fixes: b/192
Change-Id: I912151085f8298f30d5214c7965251c9266443f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6652
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Pass in, but ignore, a mutable reference to the VM to the `nix_eq`
functions, in preparation for using that VM to force thunks during
comparison.
Change-Id: I565435d8dfb33768f930fdb5a6b0fb1365d7e161
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6651
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Using rust's PartialEq trait to implement Nix equality semantics is
reasonably fraught with peril, both because the actual laws are
different than what nix expects, and (more importantly) because certain
things actually require extra context to compare for equality (for
example, thunks need to be forced). This converts the manual PartialEq
impl for Value (and all its descendants) to a *derived* PartialEq
impl (which requires a lot of extra PartialEq derives on miscellanious
other types within the codebase), and converts the previous
nix-semantics equality comparison into a new `nix_eq` method. This
returns an EvalResult, even though it can't currently return an error,
to allow it to fail when eg forcing thunks (which it will do soon).
Since the PartialEq impls for Value and NixAttrs are now quite boring,
this converts the generated proptests for those into handwritten ones
that cover `nix_eq` instead
Change-Id: If3da7171f88c22eda5b7a60030d8b00c3b76f672
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6650
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This disconnects ownership of the `File` reference in a compiler from
the calling scope, which is required for when we implement `import`.
`import` will need to carry an `Rc<RefCell<CodeMap>>` (or maybe, in
the future, Arc) to give us the ability to add new detected code
files at runtime.
Note that the choice of `Arc` over `Rc` here is not ours - it's the
codemap crate's.
Change-Id: I3aeca4ffc167acbd1701846a332d93550b56ba7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6630
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
As before, this limits the cases to a relatively small number because
otherwise things get quite large.
Change-Id: I5371dc56418fca52e1dd1d905b20868f647091ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6649
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Only running 20 cases for now, since Value can get quite big if you let
it run for a while.
Change-Id: I09ef19da22c789c4869793836c98937c44595340
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6648
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this was found by proptests!
Change-Id: I16d6a6ece3b20cdddd6f78c94cc87befb1b651e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6647
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add an optional config argument to the `<trait>_laws` macros, to allow
configuring the generated tests with a ProptestConfig struct (to limit
the number of cases run)
Change-Id: I2143ddb72c6a870e8be4a9058135b6f9a703039e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6646
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Impl Arbitrary for Value (and NixAttrs and NixList) in the same way we
did for NixString. Value currently only generates non-"internal"
values (no thunks, AttrNotFound, etc.) and can't generate
functions (builtins or closures), because those'd require full
generation of tvix bytecode, which is a bit more work than I'd like to
do now - there's a `todo!` left in the code for a place where we could
allow opting-in to internal values and functions later.
Change-Id: I07a59e2b1d89cfaa912d4ecebd642caf4ddb040a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6627
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is pretty boring at the moment, but mostly serves as a foot in the
door in the direction of writing more tests
Change-Id: Id88eb4ec7e53ebb2d5b5c254c8f45ff750238811
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6637
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Invalid integers (eg integers that're too long) end up as error returns
on the `.value()` returned from the literal in the AST - previously we'd
unwrap this error, causing it to panic the compiler, but now we've got a
nice error variant for it (which just unwraps the underlying
std::num::ParseIntError).
Change-Id: I50c3c5ba89407d86659e20d8991b9658415f39a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6635
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This bumps rnix-parser to a commit that should be unaffected by the
Nix >= 2.4 bug that prevents it from cloning repositories with filters.
Change-Id: Ie01da95245ec6740fa889eb710819e512202f665
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6634
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Just want to note those down somewhere before I forget them again,
we can delete them later if we have it all figured out.
Change-Id: Icafa2d8fc7ca39e38e9637b7eca6f2bbf487c2b8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6632
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add a suite of proptests covering the laws of the handwritten stdlib
trait impls (Eq, Ord, and Hash) for String, generated from a new set of
macros for generating those tests which can be applied to other types.
Change-Id: Ib3276c9e96fca497aece094e5612707d3dc77ccd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6626
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The From<String> impl for NixString only generates StringRepr::Heap
strings, but we want to make sure we're testing StringRepr::Smol too
Change-Id: I6d04b9cf12ef8462fe2788e0c6414b165f40311d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6629
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
It's proptest time!
Add deps on the proptest and test_strategy crates, gated behind a
new (default-enabled) "arbitrary" feature flag so that they don't affect
dependencies of things like tvixbolt that depend on tvix.
These are going in dependencies, not dev-dependencies, so that we can
impl Arbitrary for stuff outside of test modules (which will be
important for integration suites which want to run proptests)
Change-Id: I1613bd3ea9a835e22986ad4e59700e8736007963
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6624
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This matches the name of the AST node from which it was compiled.
Suggested by sterni in cl/6231
Change-Id: Ia51525158d2f47467c01fce2282005b1a8417a47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6623
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Add the start of a test suite that compares tvix eval results against
nix, using the string repr of the value as the comparison. This shells
out to a nix-instantiate binary, which is configurable as an environment
variable, to eval - there's some extra machinery there to setup a new
nix store as a tempdir to allow running this test inside the nix build
for tvix-eval itself.
Currently this has a macro that'll allow writing lots and lots of
hardcoded tests, but going forward I'm also going to be looking into
adding proptest-based generation of expressions to compare.
Change-Id: I9f4895fab1e668ed2b7dfd6f92f8c80de1bbb16b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6307
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... it would be nice if we could thread it through to the `Scope`
stuff (declaring phantoms & locals).
Change-Id: Id3b84e79032b8fbb12138b719e657565355fbc79
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6616
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This trait can be used to convert most structures from rnix-parser
into a codemap::Span. It uses a macro to implement the trait for the
various expression types in the rnix AST, as Rust's silly semantic
versioning restriction stops us from doing a blanket implementation.
This will be used in the next commit to clean up the span handling in
the compiler a bit.
Change-Id: I0a437034e5fa203b5a49c6f25c45932a9f3b2bca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6615
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
... and emit a warning if anyone decides to use.
Change-Id: Iaa6fe9fa932340e6d0fa9f357155e78823702576
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6611
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Yep.
This is kind of ugly right now. The idea is that the recursive_scope
compilation function is used for recursive sets as well by emitting
the keys. The rest of the logic is pretty much identical.
There is quite a lot of code here that can be cleaned up (duplication
between attrs and let, duplication inside of the recursive scope
compilation function etc.), but I'd like to get it working first and
then make it nice.
Note that nested keys are *not* supported yet.
Change-Id: I45c7cdd5f0e1d35fd94797093904740af3a97134
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6610
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type is used in the list temporarily populated by the *second*
pass over all identifiers in a recursive scope. This first pass only
serves to make all bindings known to the compiler, without populating
their values yet.
Having a type here is going to be useful once we implement `rec`,
which needs to thread through slightly more information.
Change-Id: Ie33e0f096c5fcb6c864c991255466748b6f0d1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6609
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This needs to be reused between let & `rec` attrs.
Change-Id: I4a3bb90af4be32771b0f9e405c19370e105c0fef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6608
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes the phases of attribute set construction that Nix has very
explicit (inherits, static keys, dynamic keys).
This change focuses on the split between dynamic/static keys by
collecting all dynamic ones while compiling the static ones, and then
phasing them in afterwards. It's possible we also need to do some
additional splitting inside of the inherits.
Change-Id: Icae782e2a5c106e3ce0831dda47ed81c923c0a42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6530
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This function is necessary for all builtins that expect some form of
path as an argument. It is merely a wrapper around coerce_to_string that
can shortcut if we already have a path. The absolute path check is done
in the same way as in C++ Nix for compatibility, although it should
probably be revised in the long term (think about Windows, for example).
Since coercing to a path is not an operation possible in the language
directly, this function can live in the builtins module as the only
place it is required.
Change-Id: I69ed5455c00d193fea88b8fa83e28907a761cab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6574
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Define `.len()` method on `NixAttrs` to preallocate the capacity of the result
vector.
Also anchor an errant comment to its context (I think).
Change-Id: I268f15025d453d7b3ae1146558c80e51433dd2a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6546
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
This allows us to get rid of the count local variable which was a bit
confusing. Calling parts.len() multiple times is fine, since the length
doesn't need to be computed.
Change-Id: I4f626729ad1bf23a93cb701385c3f4b50c57456d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6584
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
With this puzzle piece of string compilation in place, `compile_str`
becomes less redundant, as every part now needs to be compiled the same.
The thunking logic becomes a bit trickier, since we need to thunk even
in the case of `count == 1` if the single part is interpolating.
Splitting the inner (shared) code in a separate function turned out to
be easier for making rustc content.
Change-Id: I6a554ca599926ae5907d7acffce349c9616f568f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6582
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
If we have multiple string parts, we need to thunk assembling the
string. If we have a single literal, it is strict (like all literals),
but a single interpolation part may compile to a thunk, depending on how
the expression inside is compiled – we can avoid forcing to early here
compared to the previous behavior.
Note that this CL retains the bug that `"${x}"` is erroneously
translated to `x`, implying e.g. `"${12}" == 12`.
The use of `parts.len()` is unproblematic, since normalized_parts()
builds a `Vec` instead of returning an iterator.
Change-Id: I3aecbfefef65cc627b1b8a65be27cbaeada3582b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6580
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Implement C++ Nix's `EvalState::coerceToString` minus some of the Path
/ store handling. This is currently only used for `toString` which does
all possible coercions, but we've already prepared the weaker coercion
variant which is e.g. used for builtins that expect string arguments.
`EvalState::coerceToPath` is still missing for builtins that need a
path, but it'll be easy to build on top of this.
Change-Id: I78d15576b18921791d04b6b1e964b951fdef22c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6571
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
OpAttrsIsSet and OpAttrsTrySelect will fail silently if the attribute
set value on the stack is actually a thunk, so we need to make sure to
force at every step of the way.
Emitting the force instructions in the compiler because it is easier to
add, but maybe the VM should do this when handling the relevant opcodes?
Comments welcome.
Change-Id: I65c5ef348d59b2d07c9bb06abb24f9f3e6a0fdb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6540
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This prevents Nix programs to observe the "internal" type of thunks.
Possibly .type_of() is also an area of the runtime where we should panic
if "internal" would ever be returned.
Change-Id: I9f358044c48ad64896fb6a1b1a42f00a29efac00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6539
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The expression inside ${…} may return arbitrary values, including
thunks, so we need to make sure to force them just in case.
Change-Id: Ic11ba00c4c92a10a83becd91233db5f57f6e59c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6541
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Avoids accidentally dropping one on the floor if we add more, pointed
out by sterni in cl/6372
Change-Id: Ib7bb0ce9c8331c8337003d20c4d5240dfae1c32a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6570
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6370
Change-Id: I324d8049a2702ced8f30ad43a64d63ae79dd0eab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6569
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6389
Change-Id: I648056a760266a8cfd7adcdc478c7ff2132991f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6568
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6395
Change-Id: I2dda2bb11fef702df05fd7a4fd93b9e717a85dad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6567
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is more useful than pointing it at the entire assert expression,
as that includes the body as well which is not going to be relevant in
the error.
Pointed out by sterni in cl/6391
Change-Id: I95a5d1edf90df65e7fa53d4d04502afd6e99e89a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6566
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is no longer required, resolution is now more sane. Pointed out
by sterni in cl/6422.
Change-Id: Icc8983c648f864e66813948df6e2d4bad6a7f312
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6565
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This field no longer needs to be directly accessible by the compiler.
Addresses a sterni lint from cl/6466
Change-Id: I5e6791943d7f0ab3d9b7a30bb1654c4a6a435b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6564
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As suggested by sterni in cl/6453.
Change-Id: I3cf80d97c11fd7d085ab510f6be4b5f937c791ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6562
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This very closely follows the way it's done for warnings, but errors
have a lot more information available in some cases which we do not
surface yet.
Note also that due to requiring the `CodeMap`, this is not yet called
from eval.rs as the way that is threaded through needs to be
refactored, so only the method for reporting these errors as strings
is implemented so far.
Next steps for this will be to add a generic diagnostics module that
reduces some of the boilerplate for this between warnings & errors,
and which will also give us a good point in the future to switch to a
fancier diagnostics crate.
Change-Id: If6bb209f8e7a568d866e516a90335b9b2afbf66d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6534
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This implements an initial fancy display for warnings emitted by the
tvix compiler, using the codemap_diagnostic crate.
Each warning variant has an associated message, and optionally an
associated annotation for the span displayed to the user.
In theory we could get a lot more fancy with the display for specific
variants if needed (e.g. re-parse the AST and actually add multiple
semantic spans based on context), but this is already a good start.
Example:
tvix-repl> let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
warning[W004]: declared variable 'toString' shadows a built-in global!
--> [tvix-repl]:1:5
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^ variable declared here
warning[W001]: URL literal syntax is deprecated, use a quoted string instead
--> [tvix-repl]:1:16
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^^^^^^^^
warning[W002]: inherited variable already exists with the same value
--> [tvix-repl]:1:40
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^^^^^^^^^^
warning[W999]: feature not yet implemented in tvix: recursive attribute sets
--> [tvix-repl]:1:70
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^
warning[W999]: feature not yet implemented in tvix: closed formals
--> [tvix-repl]:1:62
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^
warning[W003]: variable 'toString' is declared, but never used:
--> [tvix-repl]:1:5
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^ variable declared here
=> 42 :: int
These are coloured when output to a terminal.
Change-Id: If315648a07e333895db4ae1d0915ee2013806585
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6532
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This is a crate for source-span based error reporting. Since all of
our spans are already codemap spans, it is a good starting point.
We have to figure out quite a bit of logic for neat error printing;
later on if we want fancier presentation we might want to look at one
of the other libraries in this space like miette.
Change-Id: I4e28886af1ed199b7112d9dbf063c9f29b612bf1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6531
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
It is impossible for tvixbolt to recover from panics, so the user
experience of typing an expression using an unsupported feature was
that it would get sad and stop responding to input.
Instead, raise a normal value-level error of a new variant and
continue where possible.
Change-Id: Ibe016c92cacb87b85095c0f83758eddc6468053e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6528
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is used to drop an already emitted operation from a chunk again
and clean up its span tracking. This is required in cases where the
compiler has to backtrack.
Change-Id: I8112da9427688bb2dec96a2ddd12390f6e9734c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6499
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Refactors the methods used for determining whether an identifier in a
binding (i.e. an `rnix::Attr` node) is a static string, and extracting
it.
Previously all uses of this logic were for `let`-expressions, where
dynamic attributes are always an error. However, we need the same
logic to properly implement the phase separation of attribute set
compilation.
To facilitate this, the actual core logic of these methods now return
`Option`, and are only converted to errors in cases where the errors
are actually required.
Change-Id: Iad7826eff2cb428182521c6f92276310edeae1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6498
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There's about to be a lot more code for attrsets (hopefully
temporarily as part of an expand&contract cycle), while nested
attribute logic is being refactored in preparation for recursive
attribute sets.
This does not change any functionality.
Change-Id: I667565cd810ca7d9046120d1721c2ceb9095550b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6497
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We need to make sure that we compile all plain inherits in a let
expression before declaring any other locals. Plain inherits are special
in the sense that they can never be recursive, instead resolving to a
higher scope. Thus we need to compile their value, before declaring
them. If we don't do that, before any other local can be declared,
we cause a situation where the plain inherits' values are placed into
other locals' stack slots.
Note that we can't integrate the plain inherit compilation into the
regular 2-3 phase model where we defer the compilation of the value or
we'd compile `let inherit x; in …` as `let x = x; in …`.
Change-Id: I951d5df3c9661a054e12401546875f4685b5bf08
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6496
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
This test shows that let bindings' dependencies can form a cyclical
graph, so we need to use thunking to break this cycle.
Change-Id: I2a4de71fd7024f3d3d1166154784139a82f39411
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6495
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
As the new test case demonstrates, asserts need to be evaluated lazily.
Change-Id: I808046722c5a504e9497855ca5026d255c7a4c34
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6494
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
The recent change that split declaration of let based locals and the
compilation of their values did not touch locals bound by inherit in
let. These were previously declared and compiled immediately before
starting to work on the other locals introduced in a let.
In the case of plain inherits, this behavior is kept in this change,
because there's nothing wrong with it: The value of a plain inherit will
always resolve to a higher scope, either statically or dynamically.
Since inherit (from) expression might refer to other locals bound in the
same let, we need to handle them in the same three steps as ordinary let
based locals:
1. We need to declare the (uninitialised) locals.
2. We need to compile the expression that obtains their value. For this,
we create a new thunk, since the from expression may very well return
a thunk which we need to force before selecting the value we are
interested in.
3. Thunks need to be finalised.
For 1., we create an extra pass over the inherits that already declares
and initialises plain inherits and notes inherit (from) expressions in
the entries vector after declaring them. 2. only needs a bit of adapting
to create the thunks for selecting if appropriate, the rest of the
existing code can be reused.
Change-Id: Ie4ac1c0f9ffcbf7c07c452036aa8e577443af773
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6490
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
With this all other "weird scope" logic starts working for `with` as
well.
Change-Id: I0ea1d8c5fbd9cec5084bd574224f77b71ff2b487
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6487
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This completely rewrites the handling of "dynamic upvalues" to,
instead of resolving them at thunk/closure instantiation time (which
forces some values too early), capture the entire with stack of parent
contexts if it exists.
There are a couple of things in here that could be written more
efficiently, but I'm first working through this to get to a bug
related to with + recursion and the code complexity of some of the
optimisations is distracting.
Change-Id: Ia538e06c9146e3bf8decb9adf02dd726d2c651cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6486
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This struct will be responsible for tracking upvalues (and is a
convenient place to introduce optimisations for reducing value clones)
instead of a plain value vector.
The main motivation for this is that the upvalues will have to capture
the `with`-stack fully and I want to avoid duplicating the logic for
this between the two capturing types.
Change-Id: I6654f8739fc2e04ca046e6667d4a015f51724e99
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6485
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Instead of the reference to the Rc, print the address of the Rc
itself.
Change-Id: I4560598924db7d2864d5c4ae9af847aee2ea7eff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6471
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Similarly to attribute sets, list elements can be arbitrary
expressions and their (temporary) stack slots during construction must
be accounted for by the compiler.
Change-Id: I3b6f7927860627fd867c64d0cab9104fd636d4f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6470
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The temporaries left on the stack as operands to `OpAttrs` must be
accounted for in the locals array in order for operations within them
to receive correct slots.
Some test cases that were previously broken have been added.
Change-Id: Ib52b629bbdf7931f63fd45a45af1073022da923c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6468
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There are more upcomming uses of declare_phantom where this will come
in handy to avoid some code bloat.
Change-Id: I75cad8caf14511c519ab2f56e87e99bcbf0a082e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6467
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Moves the logic for removing tracked locals from a given scope from
the compiler's locals list, and leaves only the actual
compiler-related stuff (emitting warnings, cleaning up locals at
runtime) in the compiler itself.
Change-Id: I9da6eb54967f0a7775f624d602fe11be4c7ed5c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6466
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This will be re-used between the code paths for
recursive/non-recursive sets, and it might even be possible to unify
it with the logic for compiling `let inherit ...`.
Change-Id: I960a061048ac583a6e932e11ff6e642d9fc3093e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6464
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The comment explains how this works fairly well.
Note that this does not yet have the ability to check "closed
formals", i.e. without an ellipsis Tvix will *NOT* fail if unexpected
attribute set keys are provided.
Change-Id: I0d2b77e893243093d2789baa57f876d35d0a32ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6463
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
... even if the code is broken.
Change-Id: I5898bceaebf201b97e8988c94c90e7fafff82529
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6462
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As pointed out by sterni in cl/6205, this is actually possible in
syntactically valid expressions like
{ ${12 + 13} = 12; }
Change-Id: Id8a1e3aceb551f288f9050c4eea563eb6572f1a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6461
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As pointed out by grfn on cl/6091
Change-Id: I28308577b7cf99dffb4a4fd3cc8783eb9ab4d0d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6460
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
When the last instruction in a chunk is OpCall, make it an OpTailCall instead.
Change-Id: I2c80a06ee85e4abf545887b1a79b6d8b5e6123e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6458
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
If the last operation within a chunk is a function call, the call can
be executed in the same call frame without increasing the depth of the
call stack.
To enable this, a new OpTailCall instruction (similar to OpCall) is
introduced, but not yet emitted by the compiler.
Change-Id: I9ffbd7da6d2d6a8ec7a724646435dc6ee89712f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6457
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This introduces a macro to do the forcing, but this solution isn't
very nice and also does not work in all cases yet.
Change-Id: Icd18862ec47edb82c0efc3af5835a6cb6126f629
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6456
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This produces similar output to the previous tracing feature, but can
redirect the output somewhere else.
Change-Id: I9493c260f480904f3932cb74809b622c24d7be96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6453
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These methods make it possible to trace the runtime execution of the
VM through an observer.
Change-Id: I90e26853ba2fe44748613e7f761ed5c1c5fc9ff7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6452
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are required for tvixbolt to work. This interface is definitely
not stable yet, though.
Change-Id: I4076498e8f42311de74ee4f33c93a3ee0c5f8d3a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6450
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type implements an observer that is called whenever the compiler
emits a chunk (after the toplevel, thunks, or lambdas) and prints the
output of the disassembler to its internal writer.
This replaces half of the uses of the `disassembler` feature, which
has been removed from the Cargo configuration.
Note that at this commit runtime tracing is not yet implemented as an
observer.
Change-Id: I7894ca1ba445761aba4ad51d98e4a7b6445f1aea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6449
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This trait will enable library users of tvix-eval to observe internal
happenings of the compilation and runtime processes.
The initial methods of the observer will be called whenever the
compiler emits a chunk.
Change-Id: I668f6c2cfe3d6f4c1a1612c0f293831011768437
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6448
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is a step towards hiding the internal fields of thunk, and making
the interface of the type more predictable.
Part of the preparation for implementing observers.
Change-Id: I1a88a96419c72eb9e2332b56a2dd94afa47e6f88
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6447
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, it becomes possible to compile tvix-eval to
webassembly if the `repl` feature is disabled.
Change-Id: Icc0a059964cd0bea2054110c682d50fc5c87ec01
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6446
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this, most cases of `fix` in attribute sets will work correctly.
A simple test exercising both has been added.
Change-Id: I70fd431177bb6e48ecb33a87518b050c4c3d1c09
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6437
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
At the point where control flow exits Thunk::force (which may be due
to recursing), it is vital that there is no longer a borrow to the
inner thunk representation, otherwise this can cause accidental
infinite recursion (which will be detected, but cause failures on
valid code).
Change-Id: I2846f3142830ae3110a4f5d2299e9d7928634504
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6436
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it easier to track exactly which lambda is which when
inspecting e.g. the concrete representation of a thunk.
At runtime all lambdas live in an Rc. To make this print the right
address, the construction of these Rcs had to be moved up right to the
point where the lambda is first emitted (and disassembled).
Change-Id: I6070e6c8ac55f0bd697966c4e7c5565c20d19106
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6435
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
There can be different spans on the same line, so the previous
implementation would duplicate line numbers unnecessarily.
Change-Id: I8d8db77177aee0d834a6ec3584641e1bd5f31c3e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6434
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This was fixed by some of the previous commits around scopes. It's
somewhat similar to a few other tests, but I had this one failing
earlier and everything else succeeding, so it is useful to keep it
around for sure.
Change-Id: Ie6cf372b5c805daf992cd87aeb3dfe91542c381c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6431
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Deferred local upvalues can *only* occur at the same depth as the
thing that is closing over them, but there are various situations with
scope nesting where the actual stack indexes of the local and the
closer look like a deferred value is being accessed.
To fix this, simply compare the depth as well.
Change-Id: Ice77424cc87ab0a2c4f01379e68d4399a917b12b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6429
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is the same as `eval-okay-attrs-simple-inherit`.
Change-Id: I23878accc6cd62c16ec96601239838a385d31306
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6428
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The condition here was extremely hard to read prior to this change.
As the locals vector is now guaranteed to never be empty (there is
always at least a phantom for the current chunk's root expression),
the logic here can be simplified to just dropping tailing locals
entries while their depth matches that of the scope being closed.
Change-Id: I24973e23bc2ad25e62ece64ab4d8624e6e274c16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6427
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Similar to setting up a phantom slot when compiling the root value of
a file, closures and thunks need to have a phantom stack slot for the
root of the expression yielded by their thunk to make all accounting
work correctly.
The tricky thing here is that closures & thunks *escape* their inner
lambda context (that's the point!), so the functions emitting them
need to know both the *inner* slot (to resolve everything correctly
while compiling the slot) and the *outer* slot (to correctly emit
instructions for closing over upvalues).
Change-Id: I62ac58e2f639c4b9e09cc702bdbfd2373e985d7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6426
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of using a sentinel LocalIdx which potentially points to a
value in the locals stack that does not actually exist, set up an
initial uninitialised phantom value representing the result of the
root expression.
Change-Id: I82ea774daab83168020a3850bed57d35ab25c7df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6424
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
When deciding whether an upvalue needs to have a deferred resolution
step, the *stack* indexes should be compared - not the locals indexes.
The results are almost always the same, but there are tricky
situations where this can cause errors.
It's difficult to reproduce these errors in isolation, as they depend
on other scope behaviour, so this is one in a series of commits to
address the combination of issues which will gain some tests at the
end.
Change-Id: Iaa400b8d9500af58f493ab10e4f95022f3b5dd21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6423
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of using sentinel values and an additional bool, this tracks
the identifier of a local as an enum that is either a statically known
name, or a phantom.
To make this work correctly some more locals related logic has been
encapsulated in the `scope` module, which is a good thing (that's the
goal).
Phantom values are now not initialised by default, but the only
current call site of phantoms (`with` expression compilation) performs
the initialisation right away.
This commit changes no actual functionality right now, but paves the
way for fixing an issue related to `let` bodies.
Change-Id: I679f93a59a4daeacfe40f4012263cfb7bc05034e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6421
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The slot is now always known (at the root of the file it is simply
stack slot 0 once the scope drops back down to 0), so it does not need
to be wrapped in an `Option` and accessed in cumbersome ways anymore.
Change-Id: I46bf67a4cf5cb96e4874dffd0e3fb07c551d44f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6420
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change the runtime trace contains much more exact
information about the context of the computation (entering/exiting
calls etc.)
This is in large part due to moving the tracer to be a field on the VM
itself, which enables consistent ordering of traces across the
execution, and tracing an execution with its *input* instead
of *output* stack.
Change-Id: Ibe525e6e7d869756501e52bef1a441619ce7332c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6419
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it much easier to figure out what happened while debugging
this sort of thing.
Change-Id: I2e0e8096709adc647d63c04f213c547c415e5f44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6418
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This could occur when the disassembler is enabled and tracing the
runtime while a thunk is being evaluated, as it would not be possible
for the *tracer* to borrow the thunk at this exact moment.
However, we know that if the borrowing fails here we are dealing with
a not-fully evaluated thunk (blackhole), which should just print the
internal representation.
Change-Id: I4bdb4f17818d55795368e3d28842048f488f0a91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6416
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, "calling" (setting up the VM run loop for executing a call
frame) and "running" (running this loop to completion) were separate
operations.
This was basically an attempt to avoid nesting `VM::run` invocations.
However, doing things this way introduced some tricky bugs for exiting
out of the call frames of thunks vs. builtins & closures.
For now, we unify the two operations and always return the value to
the caller directly. For now this makes calls a little less effective,
but it gives us a chance to nail down some other strange behaviours
and then re-optimise this afterwards.
To make sure we tackle this again further down I've added it to the
list of known possible optimisations.
Change-Id: I96828ab6a628136e0bac1bf03555faa4e6b74ece
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6415
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If the disassembler feature is enabled, make sure that an Rc of the
codemap is available through the chunk.
Change-Id: I700f27ab665a704f73457b19bd2d7efc93828a16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6414
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The casting methods of `Value` are pretty verbose, and actually
incorrect before this commit as they did not account for inner thunk
values.
To address this, we first attempt to make them correct by introducing
a standard macro to generate them and traverse the inner thunk(s) if
necessary.
This is likely to be a performance hit as it will now involve more
cloning of values. We can do multiple things to alleviate this, but
should do some measurements first.
Change-Id: If315d6e2afe7b69db727df535bc6cbfb89a691aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6412
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it possible for builtins to force values on their own,
without the VM having to apply a strictness mask to the arguments
first.
Change-Id: Ib49a94e56ca2a8d515c39647381ab55a727766e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6411
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Scope poisoning must be inherited across lambda context boundaries,
e.g. if an outer scope has a poisoned `null`, any lambdas defined on
the same level must reference that poisoned identifier correctly.
Change-Id: I1aac64e1c048a6f3bacadb6d78ed295fa439e8b4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6410
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this, if an error occurs while forcing a thunk (which is very
likely) it is threaded through to the top by wrapping it in the
ErrorKind::ThunkForce variant.
We could use this to generate "stacktrace-like" error output if we
wanted, or simply jump through and discard everything except the
innermost error.
Change-Id: I3c1c8708c2f73ae062815adf490ce935b1979da8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6409
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously error spans were optional because the information about
code spans was not available at runtime. Now that this information has
been added, the error type will always carry a span.
This change is very invasive all throughout the codebase. This is due
to the fact that many functions that are called *by* the VM expected
to return `EvalResult`, but this no longer works as the span
information is not available to those functions - only to the VM
itself.
To work around this the majority of these functions have been changed
to return `Result<T, ErrorKind>` instead and an accompanying macro in
the VM constructs the "real" error.
Note that this implementatino currently has a bug where errors
occuring within thunks will yield the location at which the thunk was
forced, not the location at which the error occured within the code.
This will be fixed soon, but the commit is large enough as is.
Change-Id: Ib1ecb81a4d09d464a95ea7ea9e589f3bd08d5202
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6408
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Get the length of a list
Change-Id: I41d91e96d833269541a1b3c23b7cc879f96d1e5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6407
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
First pass at supporting `builtins` for tvix. The following tests appear to be
WAI:
```shell
$ cd tvix/eval
$ cargo build
$ cargo test
```
Change-Id: I27cce23d503b17a886d1109e285e8b4be4264977
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6405
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Another step towards being able to report accurate errors. The codemap
spans contain strictly more accessible information, as they now retain
information about which input file something came from.
This required some shuffling around in the compiler to thread all the
right information to the right places.
Change-Id: I18ccfb20f07b0c33e1c4f51ca00cd09f7b2d19c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6404
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As of this commit, the source spans of all emitted bytecode are fully
tracked.
Change-Id: I4c83deee0fc3f5e6fd6acad5a39047aec693b388
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6403
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These source spans will always point to the *value* that is being
forced, not the instruction that caused the force to be emitted. This
makes sense so that errors during forcing point at the value and not
the surrounding expression.
Change-Id: I4694414a3281a0de878f71634105b92148ec61f6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6402
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, the upvalue data instructions used by finalisers for
thunks and closures track the source span of the first identifier that
created the upvalue (if the same value is closed over multiple times
the upvalue will be reused, hence only the first one).
To do this the upvalue struct used by the compiler's scope now carries
an identifier node, which had to be threaded through quite a few
places.
Change-Id: I15a5fcb4c8abbd48544a2325f297a5ad14ec06ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6400
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This separation makes it possible to annotate the upvalue itself with
the span that created it, which (due to upvalue reuse) is only the
first one for an instance of the given UpvalueKind.
Change-Id: I9a991da6a3e8d71a92f981314bed900bcf434d44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6399
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are again a bit tricky in terms of emitted errors. The main
error is that the condition is not a boolean, which means that the
jump inspecting the condition must derive from the condition itself to
return an error at the correct position.
For other parts of the expression, it is simply the node itself.
Change-Id: I72411630e5d57dfc199f4c3c48afe443fe966322
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6392
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This one is tricky, specifically the span used for the final jump. I
decided that it makes sense to use the attrpath node, as the final
jump is the one that jumps *over* the default value, so the effect of
this is more closely related to the selector than the default.
It might be more correct to pass through the `or` token itself and
point to this for the jumps, but it depends a bit on what shape of
errors we could end up producing from this.
Change-Id: I29fbc97ba6b9e14e1a0e5f3a7759ddc299dd9c0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6390
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These are not actually used yet; this is in preparation for a
multi-commit chain for emitting all the right spans in the right
locations.
Change-Id: Ie99d6add2696c1cc0acb9ab928917a10237159de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6379
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This instantiates a codemap outside of the compiler and passes a
reference to the file currently under compilation to it. Note that the
"file" might just be a REPL line.
Change-Id: I131ae1ddb6d718e1374750da9ba0b99608c6058d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6378
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is currently just a wrapper around Chunk::push_op, but will gain
the span resolution logic in a moment.
Change-Id: I862bf9ecff0932f8da6708401ea044b9442c5d5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6377
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This adds a new vector to the chunk data structure which tracks spans
into a codemap. The compiler will emit this information to the chunk
when adding instructions.
The internal representation of the spans is slightly optimised to
avoid storing duplicate spans, as there are cases where many
instructions might be derived from the same span.
Change-Id: I336f8c912e7eb50ea02ed71e6164f651ca3ca790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6376
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Updated the rnix hash manually, and ran `cargo update` for the rest.
Change-Id: I457262625d648e25d745efa4d33ae44cb8f21326
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6375
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This will be used to track source spans when emitting bytecode.
The codemap is a data structure which tracks *all* the source files
visited by an evaluation, and makes it possible to represent locations
across all of the files using a simple span (i.e. pair of offsets).
When reporting errors, this even contains enough information to
reconstruct the rnix AST to create fancier reporting in certain cases
if desired.
Change-Id: I4ae98620b9b150fb5a389bd7f1e12670e3192c62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6374
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Note that I've allowed `needless_lifetimes` for the attribute set
iterator, as I find the type easier to understand with these
annotations present.
Change-Id: I33abb17837ee4813076cdb9a87f54bac4a37044e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6373
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This essentially makes the VM behave like `nix-instantiate --eval
--strict`, i.e. data structures are traversed strictly and thunks are
forced. Thunks embedded in closures are not forced.
This allows us to re-enable tests that were disabled because they
needed to output nested thunk contents, but is overall a behaviour
that must be configurable later on, as it is not cmopatible with e.g.
an evaluation of nixpkgs.
Change-Id: I5303a5c8e4322feab1384fdb7712fecb950afca5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6372
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This does not require a custom iterator type (for now?)
Change-Id: I5beb194bd8629571bd4040c69c977c27149807fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6371
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If a thunk is already evaluated, there are cases where due to the
memoisation implementation something might observe a value wrapped in
a thunk.
In these cases, the implementation of `Display` and `PartialEq` must
delegate to the underlying value.
Note that there are a handful of other cases like these which we need
to cover.
It is a little tricky to write integration tests for these directly,
especially as some of the open-upvalue optimisations coming down the
pipe will reduce the number of observable thunks.
One test that covers a part of this behaviour is currently
disabled (needs some more machinery), but it's being brought back in
the next commits.
Change-Id: Iaa8cd338c12236af844bbc99d8cec2205f0d0095
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6370
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Implementing iteration over NixAttrs requires a custom iterator type
in order to encapsulate the different representations. The BTreeMap
for example has its own iterator type which needs to be encapsulated.
This is mostly boilerplate code, but for a change some simple unit
tests have been added in.
Change-Id: Ie13b063241d461b810876f95f53878388e918ef2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6367
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These static strings show up a bunch when dealing with the internals
of attribute sets, and having them available as static references is
required.
Due to the way const expressions are evaluated, taking a reference to
the existing NixString::NAME / NixString::VALUE items does not work
and the references themselves need to be const-evaluated.
Change-Id: If6e75847af978118a3b266fe6a3242321722434d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6366
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The VM previously took care of repeatedly forcing a thunk until it
reached an evaluated state. This logic is now encapsulated inside of
the `Thunk::force` implementation.
In addition, force no longer returns a reference to the value by
default, leaving it up to callers to decide whether they want to
borrow the value or not (a helper is provided for this).
Change-Id: I2aa7da922058ad1c57fbf8bfc7785aab7971c02b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6365
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This thunks the construction of attribute sets. Because Tvix does not
currently have a "strict output" mode, a test had to be disabled that
now displays a thunk representation.
The test will be re-enabled once that is available.
Change-Id: I360332be64cd5c154f9caea21828f6f1b37a265c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6363
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This lets us create a release build with debug info, for use with e.g.
perf + hotspot
Change-Id: I03897de36c872d318abf1332ca0c1aeabe344ec6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6362
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As noticed by sterni in cl/6195
Change-Id: Ie9c1e80e2e709284fa8412334af9188d999f64dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6361
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This should not have grown a second implementation of the identifier
resolution logic, but it somehow did.
This implementation ended up being incorrect because it did not
account for upvalues inside of thunks.
Change-Id: Ieb1364d8fe43c96aaf4b125fd4b8a522aedff167
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6360
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
All attribute set *key* related operations strictly evaluate all key
fragments, including during construction of an attribute set.
Change-Id: I3519e5e9b0886c2cdc8615ea7dcb5f7be0c59b3f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6358
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The arguments of all unary/binary operators that are built in to Nix
are forced when encountered. This emits the necessary OpForce operations.
Change-Id: I691fcdbebfe7586cfe217c68d44b10b1192f82d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6357
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change any compilation of an expression is aware of its own
stack slot if it is leaving identifiers on the stack.
Change-Id: I0c9f148ae06b078a46b25180c4961686d5f2e166
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6356
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This threads the current local slot through the `compile_attr`
function and all of its callers. At the moment this does not improve
any user-facing behaviour, just internally changes the way in which
some correct expressions would fail to run.
Eventually this slot will need to reach everywhere ...
Change-Id: Iba73123dd1ced421093d8fc18ebeeffc16efacf8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6355
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is the simplest kind of thunk that can be created (and so far the
only one the compiler knows how to create), in which an identifier
inside a `let` encounters a value that is bound *after* it is
initialised.
Change-Id: I6ea4408a3baef1e7d5137365d70804283f2dbf8e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6354
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This operation forces the evaluation of a thunk.
There is some potential here for making an implementation that avoids
some copies, but the thunk machinery is tricky to get right so the
first priority is to make sure it is correct by keeping the
implementation simple.
Change-Id: Ib381455b02f42ded717faff63f55afed4c8fb7e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6352
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The capacity (i.e. number of builtins) is known from the lambda, so we
can size it correctly right away.
Change-Id: Iab0b5a3f47d450fa9866c091ebbbed935b934907
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6351
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Implements an operation very similar to `OpClosure` which populates a
thunk's upvalues and leaves it on the stack.
Change-Id: I753b4dfeeaae6919316c7028ec361aaa13d87646
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6350
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This function is reusable between thunks & closures.
Change-Id: I44d5f9897b087a385c8e75027d2ff39c48a096f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6349
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
CallFrame has to work for both thunks & closures (as a thunk is
basically a "weird 0-argument closure").
We opt to store the common, relevant fields directly in the frame to
avoid having to dereference through the nested structures
constantly (which would be especially annoying in the case of thunks).
Change-Id: I47781597b84ec5cd55502dba1713e92cf2592af3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6348
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This trait abstracts over the commonalities of upvalue handling
between closures and thunks.
It allows the VM to simplify the code used for setting up upvalues,
without duplicating between the two different types.
Note that this does not yet refactor the VM code to optimally make use
of this.
Change-Id: If8de5181f26ae1fa00d554f1ae6ea473ee4b6070
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6347
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
For now, do not distinguish between closing and non-closing thunks, it
will make the initial implementation easier. See Knuth etc.
Change-Id: I0bd51e0f89f2c77e90bac63b507e5027b649e3d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6346
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
When resolving a value on the same level that is known but not yet
defined, emit a thunk.
Consider for example:
let
# v--- requires a thunk
a = 1 * b;
b = 10;
in a
Change-Id: I922cb50973ebe05e335a7bc7cb851960cf34733b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6345
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The logic in this method is *very* similar to `compile_lambda`. It is
intended to be called around any expression that should be
thunked (such as function applications, attribute set values, etc.).
Change-Id: Idfbb2daa9f4b735095378fb9c39a2fd07c8cff91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6344
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Introduces the representation of runtime thunks, that is lazily
evaluated values. Their representation is very similar to closures.
Change-Id: I24d1ab7947c070ae72ca6260a7bbe6198bc8c7c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6343
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This exact same logic is reused for thunk creation.
Change-Id: I731db9cc659a1f2ca87db55d58d6ff632f417812
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6342
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This test case was previously broken by the bug introduced by
confusing local and stack indexes.
Change-Id: Ibef299dad266c6105deac1da5dde112fe9f640b1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6341
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Previously the functions in the scope module returned usize values,
which - sometimes from the same function - were either indexes into
the runtime stack *or* indexes into the compiler's local stack.
This is extremely confusing because it requires the caller to be aware
of the difference, and it actually caused subtle bugs.
To avoid this, there is now a new LocalIdx wrapper type which is used
by the scope module to return indexes into the compiler's stack, as
well as helpers for accounting for the differences between these
indexes and the runtime indexes.
Change-Id: I58f0b50ad94b28a304e3372fd9731b6590b3fdb8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6340
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change, the runtime can correctly capture deferred upvalues.
Change-Id: I1e43b7b1ac2553b1812424adfc8bd08ef77bf1ea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6339
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
When encountering a deferred local upvalue, the compiler will now mark
the corresponding local as needing a finaliser which makes it possible
to emit the OpFinalise instruction for this stack slot a little bit
down the line.
Change-Id: I3962066f10fc6c6e1472722b8bdb415a811e0740
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6338
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This instruction finalises the initialisation of deferred upvalues in
closures (and soon, thunks).
The compiler does not yet emit this instruction, some more accounting
is needed for that.
Change-Id: Ic4181b26e19779e206f51e17388559400da5f93a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6337
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This will leave a sentinel value in the upvalue slot in which the
actual value is to be captured after resolution once a scope is fully
set up.
Change-Id: I12b37b0dc8d32603b03e675c3bd039468e70b354
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6336
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Uses the threaded through slot offset to determine whether
initialisation of a captured local upvalue must be defered to a later
point where all values of a scope are available.
This adds a new data representation to the opcode for this situation,
but the equivalent runtime handling is not yet implemented. This is in
part because there is more compiler machinery needed to find the
resolution point.
Change-Id: Ifd0c393f76abfe6e2d91483faf0f58947ab1dedc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6329
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
While compiling local bindings, we now know the stack slot of the
value currently being compiled.
This will let us determine whether an upvalue can be captured directly
or whether it needs to wait for a synchronisation point at which the
upvalue can be instantiated.
This machinery lets us avoid unnecessary work at runtime when
instantiating closures that actually do not need complicated recursive
resolution.
This change itself introduces no new functionality, but since the
threading is noisy it is split out as a separate change.
Change-Id: I847c677ee8f6725fda1d2efd689b6a58bdccb779
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6328
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of looking up the local to be initialised by its name again,
we can simply track the index at which it was declared from the point
where the declaration was made.
This reduces some string cloning and removes unnecessary logic. It
also theoretically makes the *current* index available during locals
compilation, which can be used to optimise some recursion cases.
Change-Id: I06f403603d4f86c3d319debfe74b5a52eec00990
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6327
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This actually makes things full-circle, as this tree already had this
implementation once before all the other required components were in
place.
With this commit, the compiler can resolve recursive upvalues within
the same scope (though they will not yet work at runtime).
Change-Id: I6267e477d08f367257c3a6dde054b880d7b47211
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6326
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
In order to resolve recursive references correctly, these two can not
be initialised the same way as a potentially large number of (nested!)
locals can be declared without initialising their depth.
This would lead to issues with detecting things like shadowed
variables, so making both bits explicit is preferable.
Change-Id: I100cdf1724faa4a2b5a0748429841cf8ef206252
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6325
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The previous closure refactoring introduced a bug in which the same
closure object would get mutated constantly for each instance of a
closure, which is incorrect behaviour.
This commit instead introduces an explicit new Value variant for the
internal "blueprint" that the compiler generates (essentially just the
lambda) and uses this variant to construct the closure at runtime.
If the blueprint ever leaks out to a user somehow that is a critical
bug and tvix-eval will panic.
As a ~treat~ test for this, the fibonacci function is being used as it
is a self-recursive closure (i.e. different instantiations of the same
"blueprint") getting called with different values and it's good to
have it around.
Change-Id: I485de675e9bb0c599ed7d5dc0f001eb34ab4c15f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6323
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This puts together the puzzle pieces for threading dynamic
upvalues (that is, upvalues resolved from the `with`-stack) all the
way through.
Reading the test case enclosed in this commit and walking through it
is recommended to understand what problem is being tackled here.
In short, because the compiler can not statically know *which*
with-scope a dynamic argument is resolved from it needs to lay the
groundwork for resolving from *all* possible scopes.
There are multiple different approaches to doing this. The approach
chosen in this commit is that if a dynamic upvalue is detected, the
compiler will emit instructions to close over this dynamic value
in *all* enclosing lambda contexts.
It uses a new instruction for this that will leave around a sentinel
value in case an identifier could not be resolved, and wire the
location of this found value (or sentinel) up through the upvalues to
the next level of nesting.
In this tradeoff, tvix potentially closes over more upvalues than are
needed (but in practice, how often do people create *really* deep
`with`-stacks? and in *this* kind of code situation? maybe we should
even warn for this!) but avoids keeping the entire attribute sets
themselves around.
Looking at the test case, each surrounding closure will close
over *all* dynamic identifiers that are referenced later on visible to
it, but only the last one for each identifier will actually end up
being used.
This also covers our bases for an additional edge-case this creates,
in which an identifier potentially resolves to a dynamic upvalue *and*
to a dynamic value within the function's own scope (again, would
anyone really do this?) by introducing a resolution instruction for
that particular case.
There is likely some potential for cleaning up this code which is
quite ugly in some parts, but as this implementation is now carefully
calibrated to work I decided it is time to commit it and clean it up
in subsequent commits.
Change-Id: Ib701e3e6da39bd2c95938d1384036ff4f9fb3749
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6322
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change, encountering a dynamic upvalue will thread through
all contexts starting from the lowest context that has a non-empty
`with`-stack.
The additional upvalues are not actually used yet, so the effective
behaviour remains mostly the same. This is done in preparation for an
upcoming change, which will implement proper dynamic resolution for
complex cases of nested dynamic upvalues.
Yes, this whole upvalue + dynamic values thing is a little bit
mind-bending, but we would like to not give up being able to resolve a
large chunk of the scoping behaviour statically.
Change-Id: Ia58cdd47d79212390a6503ef13cef46b6b3e19a2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6321
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is a common idiom in both Nix and other languages when a local is
declared without actually being used.
Since Tvix warns for unused locals, having this available is useful
and can be included in the final error message as a suggestion if an
unused variable is intentional.
Change-Id: Ia85f704ba183499a3bae657c58166e2e29f9bde5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6320
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This does not yet correctly resolve them if they are more than one
scope up, however.
Change-Id: I6687073c60aee0282f2b6ffc98b34c1e96a60f20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6319
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change, it becomes possible for functions to call themselves
as they are being defined in local bindings.
Change-Id: Ib46a39ba17b1452b5673d96fa729d633d237241a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6314
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is required to efficiently construct the upvalue array at
runtime, as there are situations where during Closure construction
multiple things already have a reference to the closure (e.g. a
self-reference).
Change-Id: I35263b845fdc695dc873de489f5168d39b370f6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6312
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
`builtins.getFlake` doesn't interest us, of course, but some others may
be worth (or easy) to implement. They are pretty low priority, though,
since nixpkgs has compatiblity wrappers for the ones it uses.
The new debugging-related builtins (break and traceVerbose) are
interesting to note, but may not make sense to implement at all.
Change-Id: Icae547aa3bd9d6ee6b87897ba8210eb9b9b044c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6332
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
This avoids unnecessary rebuilds of //tvix/eval when working on it
locally using impure cargo.
Change-Id: I028033a6345a9655e2877a534448706b8f85a1a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6317
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
The `With` struct no longer contained any internals after the cleanup
logic for the stack had been moved into Compiler::compile_with,
leaving the `Vec<With>` to essentially act as a counter for the number
of things on the with stack.
That's inefficient of course, so with this commit it actually becomes
an integer (with an encapsulated API within scope::Scope).
Change-Id: I67a00987fc8b46b30d369a96d41e83c8af5b1998
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6311
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The compiler module is getting quite long and this will help keep some
order.
Right now the scope internals are not very well encapsulated; this
paves a way to reducing the API surface of the `scope` type to the
things that are actually used by the compiler instead of giving access
to its internals.
Change-Id: I8c16c26d263f018baa263f395c9cd80715199241
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6310
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This has no effect yet, other than changing the way in which some
upvalue captures break (that are already not working correctly).
However, after this change the compiler correctly detects
self-recursion and can start emitting the instructions to deal with
this at runtime.
Change-Id: Id3b0ac206c0204739597a4325bcc66f9c806c242
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6309
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Calculating the with_idx (i.e. the stack offset of the "phantom"
variable from which a `with` dynamically reads at runtime) needs to
account for unitialised variables the same way as the resolution of
normal locals does.
Change-Id: I9ffe404535bf1c3cb5dfe8d9e005798c857fff94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6308
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is required to correctly clean up the `with` values.
At the moment, the attrset from which identifiers are being taken is
always pushed on the stack. This means that it must also be removed
again, otherwise in an expression like
with { a = 15; }; a
The final stack is `[ { a = 15; } 15 ]` *after the last operation*,
which means that the attrset is still on there as garbage.
This has little practical impact right now because it is always
shadowed by the fact that the actual expression value is at the right
location, but becomes relevant when accounting for upvalue captures.
Change-Id: I69e9745bfaa4d6bbcb60ee71f4dc3f8d8695d16a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6303
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This extends the logic of `Scope::resolve_local` to detect cases where
self-recursion is occuring (i.e. an identifier is being accessed in
its own identifier).
These cases are not yet handled specially, and the logic of when
things are marked initialised (which was previously always at the same
spot as their declaration) has not changed, making this commit a
runtime no-op for now.
Change-Id: I3179642a7c55869ad4465fdd2678b0cd51a20f15
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6302
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Nix does not allow things like `let a = 1; a = 2; in a`, but doing it
across depths is allowed.
Change-Id: I6a259f8b01a254b433b58c736e245c9c764641b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6301
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This does not yet change anything semantically, but will be useful for
resolving simple cases of self-recursion etc.
Change-Id: I139ecb7e4a8a81193774392a96e73e0ea6b9f85d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6300
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These need to be handled specially by the runtime if the compiler
determines that a given local must be resolved via `with`.
Note that this implementation has a bug: It currently allows `with`
inside of nested lambdas to shadow statically known identifiers. This
will be cleaned up in the next commit.
Change-Id: If196b99cbd1a0f2dbb4a40a0e88cdb09a009c6b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6299
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The previous implementation of OpResolveWith manually controlled the
loop iteration, which skipped over the disassembler's tracing
instruction.
Instead, the resolution of dynamic variables has been delegated to a
new helper function. This has the additional benefit that the loop
labels are no longer required, making things a bit cleaner.
Change-Id: If22b74c3d49c74bf3a1ec4497cb761a9ee6cf2a4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6298
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Instead of tying the popping of the with stack to scope depth, clean
up the stack immediately after processing a with body.
The previous behaviour was actually incorrect, as it would leave
things on the with-stack longer than they were supposed to be there.
This could lead to false positive resolutions in some situations
involving closures.
Change-Id: I7b0638557503f1f71eb602e3d5ff193cdfcb67cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6297
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Implements the final bit of logic remaining for wiring up closures,
which is the runtime construction of closure objects.
When encountering an OpClosure, the VM walks through the bytecode
collecting all the upvalue location operands (see commit introducing
the OpCode::Data* variants for details) and stores the runtime values
in the new closures upvalue vector.
After that, the handling of the closure itself becomes functionally
identical to that of lambdas.
With this initial implementation of closures there are several large
optimisation potentials available, the two most notable ones are:
- Distinguish the runtime representation of lambdas and closures
explicitly.
- Detect and handle multiple-arity functions directly in the compiler.
However, for both of these we should wait until we have appropriate
benchmarking infrastructure in place. This is because our test
implementations have shown that the complexity of either of these
changes is quite significant, and we do not yet know if they really
pay off.
Change-Id: I077e977810fd5cb2b1ecd7f1a119e728025dd786
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6295
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This resolves an upvalue at runtime by pushing it on the stack from
the closure's upvalue vector.
Change-Id: Ic3e7a7ecd9f7032f679114a1995e5bbf83062fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6294
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
In preparation for implementing calling of closures, store a closure
directly in the VMs call frame.
Change-Id: Iad24cd8c49fee4ebd4d0c84ffaa4c2505ee3dfd6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6293
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
... same as the others
Change-Id: I9c8868388c10b0b6484c5bdd3799d801296c6979
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6292
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Fully implements the instructions for compiling closure
objects (without runtime handling yet).
Closure (and thunk) objects are created at runtime by capturing all
known upvalues. To represent this, the instructions for creating them
need to have a variable number of arguments. Due to that, this commit
introduces new variants in OpCode that are not actually operations,
but data.
If the VM is implemented correctly, the instruction pointer should
never point at these. Due to this, the VM will panic if it sees a data
operand during an execution run.
Change-Id: Ic56b49b3a42736dc437751e76df0e89c8d0619c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6291
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This adds a new upvalue tracking structure in the compiler to resolve
upvalues and track their positions within a function when compiling a
closure.
The compiler will emit runtime upvalue access instructions after this
commit, but the creation of the runtime closure object etc. is not yet
wired up.
Change-Id: Ib0c2c25f686bfd45f797c528753068858e3a770d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6289
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This adds a transparent wrapper around `usize` used for jump offsets
in the opcodes. This is a step towards getting rid of ambiguous plain
`usize` usage in the opcode.
Change-Id: I21e35e67d94b32d68251908b96c7f62b6f56a8bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6282
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
grfn pointed out in cl/6174 that `Result` might cause developers to
believe that this behaves like std::Result, which it does not.
Change-Id: Ia30ab0dcb7e8da7bf842777ee3fe17bcf35cb0c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6281
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Refactors the update function to take the attribute sets by value
instead.
To facilitate this, we use an equivalent of the currently unstable
`Rc::clone_or_unwrap` in the VM when encountering attribute sets, so
that in cases where the only references to the attrs being updated are
the ones on the stack those clones are avoided completely.
This does make update() a little bit more tricky internally, as some
optimised branches can directly return the moved value, and others
need to destructure with ownership. For this reason there are now two
different match statements handling the different ownership cases.
Change-Id: Ia77d3ba5c86afb75b9f1f51758bda61729ba5aab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6279
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Add a quick couple of benchmarks for merging attribute sets, large and
small.
Change-Id: I26940a9cf4e0d30e3d9eb07a7b8c366ca4072ca3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6286
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: grfn <grfn@gws.fyi>
This is no longer needed for anything and the extra clone here is not
really more costly than constructing a blackhole value in a different
place.
Change-Id: I5c63085b1b4418b629ea58a42e3bfe9a9b586d76
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6275
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Without this escape, it is possible for Nix to produce escaped
representations which are not literal Nix values again.
This was fixed in upstream Nix in
https://github.com/NixOS/nix/pull/4012 (though only for eval, not in
the REPL) and the updated test is picked from upstream after that commit.
Because we run the C++ Nix tests against our test suite as well, this
also bumps our custom Nix 2.3 to a commit that includes the
cherry-picked fix from the PR above.
Change-Id: I478547ade65f655c606ec46f7143932064192283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6271
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is a more sensible place for this function to live and makes
upvalue resolution easier down the line.
Change-Id: I48ee39bdcdb4f96a16a327f7015aff60db5b15fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6270
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This struct will carry the upvalue machinery in addition to the lambda
itself. For now, all lambdas are wrapped in closures (though
technically analysis of the environment can later remove innermost
Closure wrapper, but this optimisation may not be worth it).
Change-Id: If2b68549ec1ea4ab838fdc47a2181c694ac937f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6269
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Primarily to make sure we build benchmark targets, and avoid breaking
them
Change-Id: I0c43f4cf99ddfd38e7545ef2d8276ef6b240a1e8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6285
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Interpret was updated to take an optional path arg in
6fe5e2d75 (feat(tvix/eval): resolve relative path literals, 2022-08-12),
but since benchmarks aren't building in CI the resulting breakage of
benchmarks was missed.
Change-Id: I8a93f1b25ae62e2d032fafc153d91977c6466712
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6284
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The blackhole allocation is not going to be cheaper than cloning this.
Change-Id: Id3ad44812decb4392830be06645e67bb0a982b96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6267
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
