this was found by proptests!
Change-Id: I16d6a6ece3b20cdddd6f78c94cc87befb1b651e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6647
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add an optional config argument to the `<trait>_laws` macros, to allow
configuring the generated tests with a ProptestConfig struct (to limit
the number of cases run)
Change-Id: I2143ddb72c6a870e8be4a9058135b6f9a703039e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6646
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Impl Arbitrary for Value (and NixAttrs and NixList) in the same way we
did for NixString. Value currently only generates non-"internal"
values (no thunks, AttrNotFound, etc.) and can't generate
functions (builtins or closures), because those'd require full
generation of tvix bytecode, which is a bit more work than I'd like to
do now - there's a `todo!` left in the code for a place where we could
allow opting-in to internal values and functions later.
Change-Id: I07a59e2b1d89cfaa912d4ecebd642caf4ddb040a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6627
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is pretty boring at the moment, but mostly serves as a foot in the
door in the direction of writing more tests
Change-Id: Id88eb4ec7e53ebb2d5b5c254c8f45ff750238811
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6637
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Invalid integers (eg integers that're too long) end up as error returns
on the `.value()` returned from the literal in the AST - previously we'd
unwrap this error, causing it to panic the compiler, but now we've got a
nice error variant for it (which just unwraps the underlying
std::num::ParseIntError).
Change-Id: I50c3c5ba89407d86659e20d8991b9658415f39a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6635
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This bumps rnix-parser to a commit that should be unaffected by the
Nix >= 2.4 bug that prevents it from cloning repositories with filters.
Change-Id: Ie01da95245ec6740fa889eb710819e512202f665
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6634
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Just want to note those down somewhere before I forget them again,
we can delete them later if we have it all figured out.
Change-Id: Icafa2d8fc7ca39e38e9637b7eca6f2bbf487c2b8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6632
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add a suite of proptests covering the laws of the handwritten stdlib
trait impls (Eq, Ord, and Hash) for String, generated from a new set of
macros for generating those tests which can be applied to other types.
Change-Id: Ib3276c9e96fca497aece094e5612707d3dc77ccd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6626
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The From<String> impl for NixString only generates StringRepr::Heap
strings, but we want to make sure we're testing StringRepr::Smol too
Change-Id: I6d04b9cf12ef8462fe2788e0c6414b165f40311d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6629
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
It's proptest time!
Add deps on the proptest and test_strategy crates, gated behind a
new (default-enabled) "arbitrary" feature flag so that they don't affect
dependencies of things like tvixbolt that depend on tvix.
These are going in dependencies, not dev-dependencies, so that we can
impl Arbitrary for stuff outside of test modules (which will be
important for integration suites which want to run proptests)
Change-Id: I1613bd3ea9a835e22986ad4e59700e8736007963
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6624
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This matches the name of the AST node from which it was compiled.
Suggested by sterni in cl/6231
Change-Id: Ia51525158d2f47467c01fce2282005b1a8417a47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6623
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Add the start of a test suite that compares tvix eval results against
nix, using the string repr of the value as the comparison. This shells
out to a nix-instantiate binary, which is configurable as an environment
variable, to eval - there's some extra machinery there to setup a new
nix store as a tempdir to allow running this test inside the nix build
for tvix-eval itself.
Currently this has a macro that'll allow writing lots and lots of
hardcoded tests, but going forward I'm also going to be looking into
adding proptest-based generation of expressions to compare.
Change-Id: I9f4895fab1e668ed2b7dfd6f92f8c80de1bbb16b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6307
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... it would be nice if we could thread it through to the `Scope`
stuff (declaring phantoms & locals).
Change-Id: Id3b84e79032b8fbb12138b719e657565355fbc79
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6616
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This trait can be used to convert most structures from rnix-parser
into a codemap::Span. It uses a macro to implement the trait for the
various expression types in the rnix AST, as Rust's silly semantic
versioning restriction stops us from doing a blanket implementation.
This will be used in the next commit to clean up the span handling in
the compiler a bit.
Change-Id: I0a437034e5fa203b5a49c6f25c45932a9f3b2bca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6615
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
... and emit a warning if anyone decides to use.
Change-Id: Iaa6fe9fa932340e6d0fa9f357155e78823702576
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6611
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Yep.
This is kind of ugly right now. The idea is that the recursive_scope
compilation function is used for recursive sets as well by emitting
the keys. The rest of the logic is pretty much identical.
There is quite a lot of code here that can be cleaned up (duplication
between attrs and let, duplication inside of the recursive scope
compilation function etc.), but I'd like to get it working first and
then make it nice.
Note that nested keys are *not* supported yet.
Change-Id: I45c7cdd5f0e1d35fd94797093904740af3a97134
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6610
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type is used in the list temporarily populated by the *second*
pass over all identifiers in a recursive scope. This first pass only
serves to make all bindings known to the compiler, without populating
their values yet.
Having a type here is going to be useful once we implement `rec`,
which needs to thread through slightly more information.
Change-Id: Ie33e0f096c5fcb6c864c991255466748b6f0d1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6609
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This needs to be reused between let & `rec` attrs.
Change-Id: I4a3bb90af4be32771b0f9e405c19370e105c0fef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6608
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes the phases of attribute set construction that Nix has very
explicit (inherits, static keys, dynamic keys).
This change focuses on the split between dynamic/static keys by
collecting all dynamic ones while compiling the static ones, and then
phasing them in afterwards. It's possible we also need to do some
additional splitting inside of the inherits.
Change-Id: Icae782e2a5c106e3ce0831dda47ed81c923c0a42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6530
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This extends various ideas around the store and its slightly different
internal model.
Thanks to store composition, lazy substitution and more efficient
transfer, we can also simplify some complicated logic while building.
Change-Id: Ib3380af650fe06e114f54e8dc2df231f18af876b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6585
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This function is necessary for all builtins that expect some form of
path as an argument. It is merely a wrapper around coerce_to_string that
can shortcut if we already have a path. The absolute path check is done
in the same way as in C++ Nix for compatibility, although it should
probably be revised in the long term (think about Windows, for example).
Since coercing to a path is not an operation possible in the language
directly, this function can live in the builtins module as the only
place it is required.
Change-Id: I69ed5455c00d193fea88b8fa83e28907a761cab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6574
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Define `.len()` method on `NixAttrs` to preallocate the capacity of the result
vector.
Also anchor an errant comment to its context (I think).
Change-Id: I268f15025d453d7b3ae1146558c80e51433dd2a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6546
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
This allows us to get rid of the count local variable which was a bit
confusing. Calling parts.len() multiple times is fine, since the length
doesn't need to be computed.
Change-Id: I4f626729ad1bf23a93cb701385c3f4b50c57456d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6584
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
With this puzzle piece of string compilation in place, `compile_str`
becomes less redundant, as every part now needs to be compiled the same.
The thunking logic becomes a bit trickier, since we need to thunk even
in the case of `count == 1` if the single part is interpolating.
Splitting the inner (shared) code in a separate function turned out to
be easier for making rustc content.
Change-Id: I6a554ca599926ae5907d7acffce349c9616f568f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6582
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
If we have multiple string parts, we need to thunk assembling the
string. If we have a single literal, it is strict (like all literals),
but a single interpolation part may compile to a thunk, depending on how
the expression inside is compiled – we can avoid forcing to early here
compared to the previous behavior.
Note that this CL retains the bug that `"${x}"` is erroneously
translated to `x`, implying e.g. `"${12}" == 12`.
The use of `parts.len()` is unproblematic, since normalized_parts()
builds a `Vec` instead of returning an iterator.
Change-Id: I3aecbfefef65cc627b1b8a65be27cbaeada3582b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6580
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Implement C++ Nix's `EvalState::coerceToString` minus some of the Path
/ store handling. This is currently only used for `toString` which does
all possible coercions, but we've already prepared the weaker coercion
variant which is e.g. used for builtins that expect string arguments.
`EvalState::coerceToPath` is still missing for builtins that need a
path, but it'll be easy to build on top of this.
Change-Id: I78d15576b18921791d04b6b1e964b951fdef22c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6571
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
OpAttrsIsSet and OpAttrsTrySelect will fail silently if the attribute
set value on the stack is actually a thunk, so we need to make sure to
force at every step of the way.
Emitting the force instructions in the compiler because it is easier to
add, but maybe the VM should do this when handling the relevant opcodes?
Comments welcome.
Change-Id: I65c5ef348d59b2d07c9bb06abb24f9f3e6a0fdb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6540
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This prevents Nix programs to observe the "internal" type of thunks.
Possibly .type_of() is also an area of the runtime where we should panic
if "internal" would ever be returned.
Change-Id: I9f358044c48ad64896fb6a1b1a42f00a29efac00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6539
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The expression inside ${…} may return arbitrary values, including
thunks, so we need to make sure to force them just in case.
Change-Id: Ic11ba00c4c92a10a83becd91233db5f57f6e59c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6541
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Avoids accidentally dropping one on the floor if we add more, pointed
out by sterni in cl/6372
Change-Id: Ib7bb0ce9c8331c8337003d20c4d5240dfae1c32a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6570
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6370
Change-Id: I324d8049a2702ced8f30ad43a64d63ae79dd0eab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6569
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6389
Change-Id: I648056a760266a8cfd7adcdc478c7ff2132991f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6568
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6395
Change-Id: I2dda2bb11fef702df05fd7a4fd93b9e717a85dad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6567
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is more useful than pointing it at the entire assert expression,
as that includes the body as well which is not going to be relevant in
the error.
Pointed out by sterni in cl/6391
Change-Id: I95a5d1edf90df65e7fa53d4d04502afd6e99e89a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6566
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is no longer required, resolution is now more sane. Pointed out
by sterni in cl/6422.
Change-Id: Icc8983c648f864e66813948df6e2d4bad6a7f312
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6565
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This field no longer needs to be directly accessible by the compiler.
Addresses a sterni lint from cl/6466
Change-Id: I5e6791943d7f0ab3d9b7a30bb1654c4a6a435b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6564
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As suggested by sterni in cl/6453.
Change-Id: I3cf80d97c11fd7d085ab510f6be4b5f937c791ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6562
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This very closely follows the way it's done for warnings, but errors
have a lot more information available in some cases which we do not
surface yet.
Note also that due to requiring the `CodeMap`, this is not yet called
from eval.rs as the way that is threaded through needs to be
refactored, so only the method for reporting these errors as strings
is implemented so far.
Next steps for this will be to add a generic diagnostics module that
reduces some of the boilerplate for this between warnings & errors,
and which will also give us a good point in the future to switch to a
fancier diagnostics crate.
Change-Id: If6bb209f8e7a568d866e516a90335b9b2afbf66d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6534
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This implements an initial fancy display for warnings emitted by the
tvix compiler, using the codemap_diagnostic crate.
Each warning variant has an associated message, and optionally an
associated annotation for the span displayed to the user.
In theory we could get a lot more fancy with the display for specific
variants if needed (e.g. re-parse the AST and actually add multiple
semantic spans based on context), but this is already a good start.
Example:
tvix-repl> let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
warning[W004]: declared variable 'toString' shadows a built-in global!
--> [tvix-repl]:1:5
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^ variable declared here
warning[W001]: URL literal syntax is deprecated, use a quoted string instead
--> [tvix-repl]:1:16
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^^^^^^^^
warning[W002]: inherited variable already exists with the same value
--> [tvix-repl]:1:40
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^^^^^^^^^^
warning[W999]: feature not yet implemented in tvix: recursive attribute sets
--> [tvix-repl]:1:70
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^
warning[W999]: feature not yet implemented in tvix: closed formals
--> [tvix-repl]:1:62
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^
warning[W003]: variable 'toString' is declared, but never used:
--> [tvix-repl]:1:5
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^ variable declared here
=> 42 :: int
These are coloured when output to a terminal.
Change-Id: If315648a07e333895db4ae1d0915ee2013806585
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6532
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This is a crate for source-span based error reporting. Since all of
our spans are already codemap spans, it is a good starting point.
We have to figure out quite a bit of logic for neat error printing;
later on if we want fancier presentation we might want to look at one
of the other libraries in this space like miette.
Change-Id: I4e28886af1ed199b7112d9dbf063c9f29b612bf1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6531
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
It is impossible for tvixbolt to recover from panics, so the user
experience of typing an expression using an unsupported feature was
that it would get sad and stop responding to input.
Instead, raise a normal value-level error of a new variant and
continue where possible.
Change-Id: Ibe016c92cacb87b85095c0f83758eddc6468053e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6528
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
only run test_nix_store_add() when the feature integration_tests is
enabled.
Change-Id: I600f08ecaefe1ce77651ae07a58d7987107ab969
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6084
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is used to drop an already emitted operation from a chunk again
and clean up its span tracking. This is required in cases where the
compiler has to backtrack.
Change-Id: I8112da9427688bb2dec96a2ddd12390f6e9734c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6499
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Refactors the methods used for determining whether an identifier in a
binding (i.e. an `rnix::Attr` node) is a static string, and extracting
it.
Previously all uses of this logic were for `let`-expressions, where
dynamic attributes are always an error. However, we need the same
logic to properly implement the phase separation of attribute set
compilation.
To facilitate this, the actual core logic of these methods now return
`Option`, and are only converted to errors in cases where the errors
are actually required.
Change-Id: Iad7826eff2cb428182521c6f92276310edeae1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6498
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There's about to be a lot more code for attrsets (hopefully
temporarily as part of an expand&contract cycle), while nested
attribute logic is being refactored in preparation for recursive
attribute sets.
This does not change any functionality.
Change-Id: I667565cd810ca7d9046120d1721c2ceb9095550b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6497
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We need to make sure that we compile all plain inherits in a let
expression before declaring any other locals. Plain inherits are special
in the sense that they can never be recursive, instead resolving to a
higher scope. Thus we need to compile their value, before declaring
them. If we don't do that, before any other local can be declared,
we cause a situation where the plain inherits' values are placed into
other locals' stack slots.
Note that we can't integrate the plain inherit compilation into the
regular 2-3 phase model where we defer the compilation of the value or
we'd compile `let inherit x; in …` as `let x = x; in …`.
Change-Id: I951d5df3c9661a054e12401546875f4685b5bf08
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6496
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
This test shows that let bindings' dependencies can form a cyclical
graph, so we need to use thunking to break this cycle.
Change-Id: I2a4de71fd7024f3d3d1166154784139a82f39411
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6495
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
As the new test case demonstrates, asserts need to be evaluated lazily.
Change-Id: I808046722c5a504e9497855ca5026d255c7a4c34
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6494
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
The recent change that split declaration of let based locals and the
compilation of their values did not touch locals bound by inherit in
let. These were previously declared and compiled immediately before
starting to work on the other locals introduced in a let.
In the case of plain inherits, this behavior is kept in this change,
because there's nothing wrong with it: The value of a plain inherit will
always resolve to a higher scope, either statically or dynamically.
Since inherit (from) expression might refer to other locals bound in the
same let, we need to handle them in the same three steps as ordinary let
based locals:
1. We need to declare the (uninitialised) locals.
2. We need to compile the expression that obtains their value. For this,
we create a new thunk, since the from expression may very well return
a thunk which we need to force before selecting the value we are
interested in.
3. Thunks need to be finalised.
For 1., we create an extra pass over the inherits that already declares
and initialises plain inherits and notes inherit (from) expressions in
the entries vector after declaring them. 2. only needs a bit of adapting
to create the thunks for selecting if appropriate, the rest of the
existing code can be reused.
Change-Id: Ie4ac1c0f9ffcbf7c07c452036aa8e577443af773
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6490
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
With this all other "weird scope" logic starts working for `with` as
well.
Change-Id: I0ea1d8c5fbd9cec5084bd574224f77b71ff2b487
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6487
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This completely rewrites the handling of "dynamic upvalues" to,
instead of resolving them at thunk/closure instantiation time (which
forces some values too early), capture the entire with stack of parent
contexts if it exists.
There are a couple of things in here that could be written more
efficiently, but I'm first working through this to get to a bug
related to with + recursion and the code complexity of some of the
optimisations is distracting.
Change-Id: Ia538e06c9146e3bf8decb9adf02dd726d2c651cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6486
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This struct will be responsible for tracking upvalues (and is a
convenient place to introduce optimisations for reducing value clones)
instead of a plain value vector.
The main motivation for this is that the upvalues will have to capture
the `with`-stack fully and I want to avoid duplicating the logic for
this between the two capturing types.
Change-Id: I6654f8739fc2e04ca046e6667d4a015f51724e99
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6485
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Instead of the reference to the Rc, print the address of the Rc
itself.
Change-Id: I4560598924db7d2864d5c4ae9af847aee2ea7eff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6471
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Similarly to attribute sets, list elements can be arbitrary
expressions and their (temporary) stack slots during construction must
be accounted for by the compiler.
Change-Id: I3b6f7927860627fd867c64d0cab9104fd636d4f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6470
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The temporaries left on the stack as operands to `OpAttrs` must be
accounted for in the locals array in order for operations within them
to receive correct slots.
Some test cases that were previously broken have been added.
Change-Id: Ib52b629bbdf7931f63fd45a45af1073022da923c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6468
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There are more upcomming uses of declare_phantom where this will come
in handy to avoid some code bloat.
Change-Id: I75cad8caf14511c519ab2f56e87e99bcbf0a082e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6467
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Moves the logic for removing tracked locals from a given scope from
the compiler's locals list, and leaves only the actual
compiler-related stuff (emitting warnings, cleaning up locals at
runtime) in the compiler itself.
Change-Id: I9da6eb54967f0a7775f624d602fe11be4c7ed5c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6466
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This will be re-used between the code paths for
recursive/non-recursive sets, and it might even be possible to unify
it with the logic for compiling `let inherit ...`.
Change-Id: I960a061048ac583a6e932e11ff6e642d9fc3093e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6464
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The comment explains how this works fairly well.
Note that this does not yet have the ability to check "closed
formals", i.e. without an ellipsis Tvix will *NOT* fail if unexpected
attribute set keys are provided.
Change-Id: I0d2b77e893243093d2789baa57f876d35d0a32ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6463
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This doesn't actually do anything other than causing errors for the
current state of this folder.
Change-Id: I0af6410e9eb1700cd0b2b105c8adde077d931a69
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6492
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
... even if the code is broken.
Change-Id: I5898bceaebf201b97e8988c94c90e7fafff82529
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6462
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As pointed out by sterni in cl/6205, this is actually possible in
syntactically valid expressions like
{ ${12 + 13} = 12; }
Change-Id: Id8a1e3aceb551f288f9050c4eea563eb6572f1a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6461
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As pointed out by grfn on cl/6091
Change-Id: I28308577b7cf99dffb4a4fd3cc8783eb9ab4d0d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6460
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
When the last instruction in a chunk is OpCall, make it an OpTailCall instead.
Change-Id: I2c80a06ee85e4abf545887b1a79b6d8b5e6123e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6458
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
If the last operation within a chunk is a function call, the call can
be executed in the same call frame without increasing the depth of the
call stack.
To enable this, a new OpTailCall instruction (similar to OpCall) is
introduced, but not yet emitted by the compiler.
Change-Id: I9ffbd7da6d2d6a8ec7a724646435dc6ee89712f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6457
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This introduces a macro to do the forcing, but this solution isn't
very nice and also does not work in all cases yet.
Change-Id: Icd18862ec47edb82c0efc3af5835a6cb6126f629
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6456
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This produces similar output to the previous tracing feature, but can
redirect the output somewhere else.
Change-Id: I9493c260f480904f3932cb74809b622c24d7be96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6453
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These methods make it possible to trace the runtime execution of the
VM through an observer.
Change-Id: I90e26853ba2fe44748613e7f761ed5c1c5fc9ff7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6452
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
