We currently only support querying by the output hash digest.
This makes the interface a bit simpler.
Change-Id: I80b285373f1923e85cb0e404c4b15d51a7f259ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8570
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This allows decomposing a path consisting of a store path AND a suffix
into a StorePath, and a PathBuf containing the rest.
Change-Id: I81290e2fd804cdc9d1e88c71cb22c0fb882d7936
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8567
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Make it cleaner that StorePath only does encode the first path component
after the STORE_DIR prefix. Also, move some of the comments around a
bit, so it makes more sense what's using what.
Change-Id: Ibb57373a13526e30c58ad561ca50e1336b091d94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8566
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
It's okay if these calls mutate some internal state inside an
implementation.
Change-Id: I12bb11bde0310778c3da1275696bf7de058863a3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8571
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Make it more explicit that we expect the from_string calls to fail here.
Change-Id: Ib3d46fc0850e364125e3548670ef301eeea2e45c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8565
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This connects to a (remote) tvix-store BlobService over gRPC.
Change-Id: If31f706738a5c3445886c117feca8b61f3203e9e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8552
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Whether chunking is involved or not, is an implementation detail of each
Blobstore. Consumers of a whole blob shouldn't need to worry about that.
It currently is not visible in the gRPC interface either. It
shouldn't bleed into everything.
Let the BlobService trait provide `open_read` and `open_write` methods,
which return handles providing io::Read or io::Write, and leave the
details up to the implementation.
This means, our custom BlobReader module can go away, and all the
chunking bits in there, too.
In the future, we might still want to add more chunking-aware syncing,
but as a syncing strategy some stores can expose, not as a fundamental
protocol component.
This currently needs "SyncReadIntoAsyncRead", taken and vendored in from
https://github.com/tokio-rs/tokio/pull/5669.
It provides a AsyncRead for a sync Read, which is necessary to connect
our (sync) BlobReader interface to a GRPC server implementation.
As an alternative, we could also make the BlobReader itself async, and
let consumers of the trait (EvalIO) deal with the async-ness, but this
is less of a change for now.
In terms of vendoring, I initially tried to move our tokio crate to
these commits, but ended up in version incompatibilities, so let's
vendor it in for now.
Change-Id: I5969ebbc4c0e1ceece47981be3b9e7cfb3f59ad0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8551
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
We already returned UnexpectedEof in case the reader stopped returning
bytes too early, but similarly we should also fail if there's still
bytes left to be read in the reader passed.
We normally use the NAR writer to produce new NAR files, so the readers
point to the blobs we actually want to render, and having some data left
in there should be an error.
If for some reason the reader points to more data than just the blob,
the `.take` method can be used to limit it to the (known) size.
Change-Id: I9e8fa0a6dd9c794492abb6dc9e55995e619cb3bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8553
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Before there was code scattered about (e.g. text hashing module and
derivation output computation) constructing store paths from low level
building blocks --- there was some duplication and it was easy to make
nonsense store paths.
Now, we have roughly the same "safe-ish" ways of constructing them as
C++ Nix, and only those are exposed:
- Make text hashed content-addressed store paths
- Make other content-addressed store paths
- Make input-addressed fixed output hashes
Change-Id: I122a3ee0802b4f45ae386306b95b698991be89c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8411
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The logic validating connectivity of Directory nodes should be moved
to SimplePutter, and this use whatever DirectoryPutter the store comes
with.
Change-Id: Id68a86a96cc49ff73920017839788859ea9c5161
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8358
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This should allow import_path to communicate to a gRPC remote store,
that actually verifies the Directory nodes are interconnected.
Change-Id: Ic5d28c33518f50dedec15f1732d81579a3afaff1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8357
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This provides a handle to upload multiple proto::Directory as part of
the same closure.
Change-Id: I9213dde257a260c8622239918ea541064b270484
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8356
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
When building store paths we can just construct the thing.
Change-Id: Ife5d461d6a440ecbb22f32a86a6d51d212a2035b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8409
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
They can go under `nixhash`
Change-Id: Ia15835c57130b66d58f5df80ae9595dceee00941
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8408
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
It is moved into `store_path::utils` with the other path builders.
Change-Id: I3257170e442af5d83bcf79e63fa7387dd914597c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8410
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This switches out the previous compressed representation (count of
instructions per span) with a representation where the chunk's span
list stores the index of the first operation that belongs to a span,
and finds the right span by using a binary search when looking them
up.
This improves the lookup complexity from O(n) to O(log n).
This improvement was suggested and (mostly) implemented by GPT-4. I
only fixed up some names and updated the logic for deleting
spans (which it only did not do because I didn't tell it about that).
The code was verified by producing a complex error before/after the
change and ensuring that all spans in the error match exactly.
Co-Authored-By: GPT-4
Change-Id: Ibfa12cc6973af1c9b0ae55bb464d1975209771f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8385
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This doesn't have anything to do with ATerms, we just happen to be using
the aterm representation of a Derivation as contents.
Moving this into store_path/utils.rs makes these things much cleaner -
Have a build_store_path_from_references function, and a
build_store_path_from_fingerprint helper function that makes use of it.
build_store_path_from_references is invoked from the derivation module
which can be used to calculate the derivation path.
In the derivation module, we also invoke
build_store_path_from_fingerprint during the output path calculation.
Change-Id: Ia8d61a5e8e5d3f396f93593676ed3f5d1a3f1d66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8367
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This only added a suffix to the input argument, if build_store_path was
building the path of a Derivation.
As we need to also add the `.drv` suffix to the name we pass into
text_hash_string inside calculate_derivation_path, we can simply add the
suffix there and drop the parameter from build_store_path.
Change-Id: Icd5343dd1458f112b9296b389e81ce2ebdd16a9f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8365
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Use it to calculate the text_hash_string, which is then used in the
calculate_derivation_path and path_with_references functions.
Relates to b/263.
Change-Id: I7478825e2a23a11224212fea5e3fd06daa97d5e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8364
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
… and keep the pub exports as is.
Change-Id: I2ad21660577553395f05b5ba71083626429b0dfc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8363
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
… and keep the pub exports as is.
Change-Id: I9f89a738c508c478ddba61303c21ea294f01ee9f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8362
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
We do compare for equality. This comment probably was when I tried to
compare the `Result<T, E>`, and as `E` doesn't derive PartialEq it was
annoying.
Change-Id: I18bb19528c76af91c9d24d88d55dd46d0c092d20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8354
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This moves the recursive BFS traversal of Directory closures from the
GRPCDirectoryServiceWrapper out into a a DirectoryTraverser struct
implementing Iterator.
It is then used from various implementors of DirectoryService in the
`get_recursive()` method.
This allows distinguishing between recursive requests and non-recursive
requests in the gRPC client trait implementation.
Change-Id: I50bfd4a0d9eb11832847329b78c587ec7c9dc7b1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8351
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This grows the frame stack as the call stack grows, which yields *much*
better user-facing error messages.
I haven't measured the performance impact this has yet, for now I'm
still just trying to add more information to errors and then cut down
again where necessary.
Change-Id: I89f058ef31979edacf4667775d460b60704ce4d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8334
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This provides a GRPCDirectoryService struct implementing
DirectoryService, allowing a client to Directory objects from a (remote)
tvix-store.
Remote in this case is anything outside the current process, be it
another process, or an endpoint on the network.
To keep the sync interface in the `DirectoryService` trait, a handle to
some tokio runtime needs to be passed into the constructor, and the two
methods use `self.tokio_handle.spawn` to start an async function, and
`self.tokio_handle.block_on` to wait for its completion.
The client handle, called `grpc_client` itself is easy to clone, and
treats concurrent requests internally. This means, even though we keep
the `DirectoryService` trait sync, there's nothing preventing it from
being used concurrently, let's say from multiple threads.
There's still two limitations for now:
1) The trait doesn't make use of the `recursive` request, which
currently leads to a N+1 query problem. This can be fixed
by `GRPCDirectoryService` having a reference to another
`DirectoryService` acting as the local side.
I want to wait for general store composition code to pop up before
manually coding this here.
2) It's currently only possible to put() leaf directory nodes, as the
request normally requires uploading a whole closure. We might want
to add another batch function to upload a whole closure, and/or do
this batching in certain cases. This still needs some more thinking.
Change-Id: I7ffec791610b72c0960cf5307cefbb12ec946dc9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8336
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
We query the blob service for detailled blob info, not the chunk
service.
Change-Id: I85a6a57b1dae74a950f734be7d4455c5c35ae355
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8348
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
This toggles whether tvix will evaluate the top-level value and
deep-force it, or return it potentially still containing thunks.
Change-Id: Ie910941e3b6a0f16c5c0cb896d73947626335f4b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8326
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it possible for callers to control whether they can receive
partially evaluated values from an evaluation or not.
We're actually flipping the default behaviour to non-strict top-level
evaluation, which means that callers have to set `strict = true` on
the Evaluation to get the previous behaviour.
Change-Id: Ic048e9ba09c88866d4c3177d5fa07db11c4eb20e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8325
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
After ingestion of the contents into the store, this will use the
NonCachingNARCalculationService to create a NAR stream or the contents
of the path, and use our Derivation output path calculation machinery to
determine the output path (using recursive hashing strategy).
In a real-world scenario, we obviously want to cache these calculations,
but this should be sufficient to tinker around with it.
Change-Id: I9b2e69384414f0be1bdcb5a99a4bfd46e8db9932
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8317
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Emits the span of the `set` that is being accessed in the `force`
operation of an attribute access.
Looking at traces, it's a lot more useful to get information about
*what* is being forced, as in cases like `foo.bar` it can be
misleading to have an error highlight `bar`, when the error occured
while forcing `foo` to be able to access `bar` in the first place.
Change-Id: Id46ff28f20c67cb4971727ac52cc4811795cea2d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8272
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This reports the span
1. of the code within a thunk,
2. of the place where the thunk was instantiated,
3. of the place where the thunk was first forced,
4. of the place where the thunk was forced again,
when yielding an infinite recursion error, which hopefully makes it
easier to debug them.
The spans are tracked in the ThunkRepr::Blackhole variant when putting
a thunk under evaluation.
Note that we currently have some loss of span precision in the VM loop
when switching between frame types, so spans 3/4 are currently a bit
wonky. Working on it.
Change-Id: Icbd2a9df903d00e8c2545b3fc46dcd2a9e3e3e55
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8270
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This is step 1 towards being able to use all 4 spans that we know when
dealing with infinite recursion. It tracks the span at which the
force of a thunk was first requested when constructing a blackhole, so
that we can highlight the spans of the first and second forces.
These are actually the least relevant spans, but the easiest to put in
place, more coming soon.
Change-Id: I4c7e82f6211b98756439d4148a4191457cc46807
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8269
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This produces traces in which we can see what kind of native code was
run. Note that these "names" are named after the generator message, so
these aren't *really* intended for end-user consumption, but we can
give them saner names later.
Example:
https://gist.github.com/tazjin/82b24e92ace8e821008954867ee05057
This already makes the traces a little easier to parse.
Change-Id: Idcd601baf84f492211b732ea0f04b377112e10d0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8268
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
When emitting an error at runtime, the VM will now use the new
`NativeError` and `BytecodeError` error kinds (which just wrap inner
errors) to create a set of diagnostics to emit.
The primary diagnostic is emitted last, with `error` type (so it will
be coloured red in terminals), the other ones will be emitted with
`note` type, highlighting the causal chain.
Example:
https://gist.github.com/tazjin/25feba7d211702453c9ebd5f8fd378e4
This is currently quite verbose, and we can cut down on this further,
but the purpose of this commit is to surface more information first of
all before worrying about the exact display.
Change-Id: I058104a178c37031c0db6b4b3e4f4170cf76087d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8266
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This actually uses coercion under the hood in C++ Nix. See the test
for an example.
Change-Id: Id56b364acf269225b6829d0b600e0222f8b3608d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8322
Reviewed-by: andi <andi@notmuch.email>
Tested-by: BuildkiteCI
This was commented out and forgotten during the generator refactor, oh
well.
Change-Id: I474b685159a955a846db462da0dd0067af177b04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8321
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Passing in a &proto::node::Node into all this allows us consumers to
keep ownership of the proto::node::Node.
Change-Id: I44882a86c46826b06a8a8a0b24c18adfc7052662
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8316
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
The behaviour of this function is a bit unintuitive, and cl/8310 already
inlined the other consumer of it.
Rewrite the last consumer of the function, so we can drop it.
Change-Id: I59c8486037ce3f777667d1d9e4f4a9316d5a0cb9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8311
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of having two very similar match branches for the FOD and non-
FOD case, detect the FOD case while looping over all outputs.
In the case of anything other than recursive sha256 FODs, the
fingerprint and output path calculation is exactly the same.
Change-Id: Ieb6995653d008766e595cf29d7cd4fb1334e33dd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8310
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Walking the arguments might encounter an `outputs` output, which might
explicitly (for whatever reason) specify the `out` output.
To prevent dropping FOD settings in this case, we have to populate
that part of the configuration after walking the other attributes.
Change-Id: Iee6a7f0a71e9c9699e79d35e6cb19e1ddb49395d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8312
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This stops using our own custom Hash structure, which was mostly only
used because we had to parse the JSON representation somehow.
Since cl/8217, there's a `NixHash` struct, which is better suited to
hold this data. Converting the format requires a bit of serde labor
though, but that only really matters when interacting with JSON
representations (which we mostly don't).
Change-Id: Idc5ee511e36e6726c71f66face8300a441b0bf4c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8304
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Apparently, having multiple packages with the same path is a bad thing:
```
The bin target `tvix-store` in package `tvix-store-bin v0.1.0 (/home/flokli/tvl/tvix/store)` has the same output filename as the lib target `tvix_store` in package `tvix-store-bin v0.1.0 (/home/flokli/tvl/tvix/store)`.
Colliding filename is: /home/flokli/tvl/tvix/target/doc/tvix_store/index.html
The output filenames should be unique.
This is a known bug where multiple crates with the same name use
the same path; see <https://github.com/rust-lang/cargo/issues/6313>.
```
Change-Id: Ic785c0349070783baf5e8fd23f5fb60603a3c995
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8308
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
There's still some shadowing going on, but that's left for a followup
CL.
Change-Id: I02992f1eb494faca99857a3a5ee4dcd47f1b9fd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8306
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This will be published on docs.tvix.dev
Change-Id: I348e057351d5295ad20953c9e9a32c257abab089
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8298
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The website itself contains no useful information that we don't
already have published anywhere, but it's a decent landing place.
Mostly I want to have something on the root of tvix.dev, so that we
can start using it for other purposes.
Change-Id: Id2b4dabc7f6e4dd26b61484b86dbde2f39aa1719
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8296
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This only trims the output paths from a Derivation struct, not the
output hashes.
Change-Id: I9250fec4602ed05bb64540c4a89ddb6fb052be1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8303
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Call this function derivation_or_fod_hash, and return a NixHash.
This is more in line with how cppnix calls this, and allows using
to_nix_hash_string() in some places.
Change-Id: Iebf5355f08ed5c9a044844739350f829f874f0ce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8293
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Change-Id: I8224bf039f739c401900b5a2ddc839810c87cf6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8226
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
We settled on this being the most reasonable name for this construct.
Change-Id: Ic31c45461a842f22aa05f4446123fe3a61dfdbc0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8291
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Given Rust's current lack of support for tail calls, we cannot avoid
using `async` for builtins. This is the only way to avoid
overflowing the cpu stack when we have arbitrarily deep
builtin/interpreted/builtin/interpreted/... "sandwiches"
There are only five `async fn` functions which are not builtins
(some come in multiple "flavors"):
- add_values
- resolve_with
- force, final_deep_force
- nix_eq, nix_cmp_eq
- coerce_to_string
These can be written iteratively rather than recursively (and in
fact nix_eq used to be written that way!). I volunteer to rewrite
them. If written iteratively they would no longer need to be
`async`.
There are two motivations for limiting our reliance on `async` to
only the situation (builtins) where we have no other choice:
1. Performance.
We don't really have any good measurement of the performance hit
that the Box<dyn Future>s impose on us. Right now all of our
large (nixpkgs-eval) tests are swamped by the cost of other
things (e.g. fork()ing `nix-store`) so we can't really measure
it. Builtins tend to be expensive operations anyways
(regexp-matching, sorting, etc) that are likely to already cost
more than the `async` overhead.
2. Preserving the ability to switch to `musttail` calls.
Clang/LLVM recently got `musttail` (mandatory-elimination tail
calls). Rust has refused to add this mainly because WASM doesn't
support, but WASM `tail_call` has been implemented and was
recently moved to phase 4 (standardization). It is very likely
that Rust will get tail calls sometime in the next year; if it
does, we won't need async anymore. In the meantime, I'd like to
avoid adding any further reliance on `async` in places where it
wouldn't be straightforward to replace it with a tail call.
https://reviews.llvm.org/D99517https://github.com/WebAssembly/proposals/pull/157
https: //github.com/rust-lang/rfcs/issues/2691#issuecomment-1462152908
Change-Id: Id15945d5a92bf52c16d93456e3437f91d93bdc57
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8290
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: Adam Joseph <adam@westernsemico.com>
This commit moves fetch_forced_with and fetch_captured_with into the
scope of their only caller (resolve_with).
Change-Id: I9a8bc27228888729d591e8cb021c431b2b6468f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8289
Autosubmit: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This rewrites nix_cmp_ordering as an iterative loop, which
eliminates the extra pinned-boxing helper function.
Change-Id: I33d0ecc913e02affd8fd4c7bc1c9ecfdf4c7deb9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8288
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: Adam Joseph <adam@westernsemico.com>
* We no longer need backtrace-on-stack-overflow, as we no longer
overflow the stack with the recent eval refactorings. This was weird
voodoo anyways, introduced earlier to debug some cases where stack
overflows occured.
* default features of genawaiter crate are not needed, as we don't use
their proc macros
Change-Id: I346fc5a18d7f117ee805909a8be8f535b96be76c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8263
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This reorders the operations in the VM's main `match` statement while
evaluating bytecode according to the frequency with which these
operations appear in some nixpkgs evaluations.
I used raw data that looks like this:
https://gist.github.com/tazjin/63d0788a78eb8575b04defaad4ef610d
This has a small but noticeable impact on evaluation performance.
No operations have changed in any way, this is purely moving code
around.
Change-Id: Iaa4ef4f0577e98144e8905fec88149c41e8c315c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8262
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The name of this was not accurate anymore after all the recent
shuffling, as noted by amjoseph. Conceptual tail calls here only occur
for Nix bytecode calling Nix bytecode, but things like a builtin call
actually push a new native frame.
Change-Id: I1dea8c9663daf86482b8c7b5a23133254b5ca321
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8256
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
... except now the tests fail, but at least it works
Change-Id: I05e86c173f40533ae65548585c1ddaa200ac5235
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8214
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This file which ships with C++ Nix is required for evaluating nixpkgs.
Like C++ Nix, we now inject a pseudo path in EvalIO from which this
will resolve as <nix/fetchurl.nix>
Change-Id: Ic948c476a2cfc6381d5655d308bc2d5fa25b7123
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8213
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This drops the usage of serde::Serialize, as the trait can not be used
to implement the correct semantics (function colouring!).
Instead, a manual JSON serialisation function is written which
correctly handles toString, outPath and other similar weirdnesses.
Unexpectedly, the eval-okay-tojson test from the C++ Nix test suite
now passes, too.
This fixes an issue where serialising data structures containing
derivations to JSON would fail.
Change-Id: I5c39e3d8356ee93a07eda481410f88610f6dd9f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8209
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This adds static strings to generator frames that describe the
generator in a human-readable fashion, which are then logged in
observers.
This makes runtime traces very precise, explaining exactly what is
being requested from where.
Change-Id: I695659a6bd0b7b0bdee75bc8049651f62b150e0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8206
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
These are serialised as the serialisation of the value of that field.
Change-Id: Ida51708b1f43ce09b0ec835f4e265918aa31dd09
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8205
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
These must be serialised to a JSON string of the *result* of coercing
the function application to a string.
Change-Id: Ib7f49ccd950503ddbdbf99643cd59565e26b50da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8204
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
It turns out that this is used not just in coerceToString, but also in
toJSON.
Change-Id: I1c324b115a0b8bb6d83446d5bf70453c9b90685e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8203
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Do not print the entire value (they're likely to be thunks anyways).
This is useful because there *can* be cases where something like
`nixpkgs` itself is sent through one of these messages, in which case
the observer trying to print it will just blow up.
Change-Id: I1fa37ea071d75efa0eb3428c6e2fe4351c62be6b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8202
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Print only the top 6 values of the stack, not the entire stack.
There's very few operations that deal with more values anyways, so the
rest are not likely to be useful.
This gets us one step closer to tracing VERY large executions without
blowing up.
Change-Id: I97472321b0321b25d534d9f53b3aadfacc2318fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8201
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This can actually blow up when tracing arbitrary execution, as some of
the data structures just get too large to run through a tabwriter.
Change-Id: I6ec4c30ee48655b8a62954ca219107404fb2c256
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8200
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Formals can be initialised with deferred default values (see the test
cases), in which case they need an extra thunk to have something that
can be finalised appropriately when the setup is done.
Fixes: b/255
Change-Id: I380e3770be68eaa83ace96d450c7cead32dacc9f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8196
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This shaves another 8 bytes off Value. How did that type get so big?!
Change-Id: I65e9b59a1636bd57e3cc4aec5fea16887070b832
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8153
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
No longer needed, and in some cases caused some extra work.
Change-Id: I64e8e7292573bdc92a9c7a8e470e33f8c526f311
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8152
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Instead of the two different representations (which we don't really
use much), use a `Box<str>` (which potentially shaves another 8 bytes
off `Value`).
NixString values themselves are immutable anyways (which was a
guarantee we already had with `SmolStr`), so this doesn't change
anything else.
Change-Id: I1d8454c056c21ecb0aebc473cfb3ae06cd70dbb6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8151
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The size of a `Vector<Value>` is 64 *bytes*, which is quite large, and
it bloated the entire Value type to this size.
This change adds an indirection for the inner vector through Rc.
Initially I tried to use a Box, but this breaks pointer equality
guarantees for the Vector when it is small enough to be inlined.
This reduces the size of Value from 64 to 32 bytes.
Change-Id: Ic3211e861b1966c78b2c3d536ba291fea92647fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8150
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
