Since we push arguments onto a stack when calling multi-argument
functions, we actually were ending up calling `call_with` with the
arguments in the *reverse order* - we patched around this by passing the
arguments in the reverse order for `foldl'`, but it makes more sense to
have them just be the order that the function would be called with in
user surface code instead.
Change-Id: Ifddb98f46970ac89872383709c3ce758dc965c65
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7067
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
When compiling a lambda, take the name of the outer slot (if
available) and store it as the name on the lambda.
These names are then shown in the observer, and nowhere else (so far).
It is of course common for these things to thread through many
different context levels (e.g. `f = a: b: c: ...`), in this setup only
the outermost closure or thunk gains the name, but it's better than
nothing.
Change-Id: I681ba74e624f2b9e7a147144a27acf364fe6ccc7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7065
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
There are some rare scope cases with deferred access where this
doesn't behave correctly otherwise.
Change-Id: I6c774f5e62c1cb50b598026c54727017a52cd22d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7064
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The warning needs to consider whether it is occuring inside of a
thunk, i.e. the dynamic ancestry chain of lambda contexts must be
inspected and not just the current scope.
Change-Id: I5cf5482d67a8bbb9f03b0ecee7a62f58754f8e59
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7063
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
This check is now actually simply equivalent to checking whether the
target has been initialised or not.
Change-Id: I30660d11073ba313358f3a64234a90ed81abf74c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7062
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
These are builtins which can be basically implemented as the identity
function from the perspective of pure evaluation, and which help us
get closer to evaluating nixpkgs.
For now, builtins added here will be "usable" and just emit a warning
about not being implemented yet.
Change-Id: I0fce94677f01c98c0392aeefb7ab353c7dc7ec82
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7060
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Checking the computed depth and stack slot against the computed depth
and stack slot is equivalent to just checking the indices into the
locals vector against each other (i.e. "is the slot we're compiling
into the slot we're accessing?")
Change-Id: Ie85a68df073e3b2e3d9aba7fe8634c48eada81fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7059
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
When capturing an upvalue, return a detailed TvixBug error that
contains metadata about what exactly was missing.
This particular thing helps with debugging some scope issues we still
seem to have.
Change-Id: I1089a1df4b3bbc63411a4907c3641a5dc3fad984
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7058
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Using the same method as in Thunk::deep_force, detect cycles when
printing values by maintaining a set of already seen thunks.
With this, display of infinite values matches that of Nix:
> nix-instantiate --eval --strict -E 'let as = { x = 123; y = as; }; in as'
{ x = 123; y = { x = 123; y = <CYCLE>; }; }
> tvix-eval -E 'let as = { x = 123; y = as; }; in as'
=> { x = 123; y = { x = 123; y = <CYCLE>; }; } :: set
Change-Id: I007b918d5131d82c28884e46e46ff365ef691aa8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7056
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This can be raised in cases where some panics lurk (e.g. indexed
accesses).
Change-Id: I93f4d60568277e9c5635aa52f378645626d68c5e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7057
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Note that this test (ironically) fails if the observer is used (e.g.
with --trace-runtime), but that's a separate issue.
Change-Id: I952eaeac8b5a7acce9c66cd4744ec570280748e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7055
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This is done via a new `deepForce` function on Value. Since values can
be cyclical (for example, see the test-case), we need to do some extra
work to avoid RefCell borrow errors if we ever hit a graph cycle:
While deep-forcing values, we keep a set of thunks that we have
already seen and avoid doing any work on the same thunk twice. The set
is encapsulated in a separate type to stop potentially invalid
pointers from leaking out.
Finally, since deep_force is conceptually similar to
`VM::force_for_output` (but more suited to usage in eval since it
doesn't clone the values) this removes the latter, replacing it with
the former.
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Change-Id: Iefddefcf09fae3b6a4d161a5873febcff54b9157
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7000
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
When forcing thunks in `force_with_output`, the call stack of the VM
is actually empty (as the calls are synthetic and no longer part of
the evaluation of the top-level expression).
This means that Tvix crashed when constructing error spans for the
`fallible` macro, as the assumption of there being an enclosing span
was violated.
To work around this, we instead pass the span for the whole top-level
expression to force_for_output and set this as the span for the
enclosing error chain. Existing output logic will already avoid
printing the entire expression as an error span.
This fixes b/213.
Change-Id: I93978e0deaf5bcb0f47a6fa95b3f5bebef5bad4c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7052
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
The version of buf used is quite old.
nixpkgs provides a more recent version, but it requires us to migrate
config to the latest version.
depot_scanner.proto doesn't honor some of the conventions, so we need
allow_comment_ignores and drop a bunch of comments in there.
Change-Id: Ic978fe92fb7c8471f58c137497528f18aad8f3ab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7053
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: tazjin <tazjin@tvl.su>
Failures to resolve a nix search path lookup in angle brackets can be
caught using tryEval (if it reaches the runtime). Resolving relative
paths (either to the current directory or the current user's home) can
never be caught, even if they happen inside a thunk at runtime (which is
currently the case for home-relative paths).
Change-Id: I7f73221df66d82a381dd4063358906257826995a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7025
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Turns out that pathContextDrvPath already exists as a builtin which
is very convenient. Actually somewhat embarassing that I missed this
for so long.
Change-Id: Ieb5e113d70dec548b3053911ff9dbe9ed48402be
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7050
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Adding these to the C++ Nix CI ensures that it is possible for the
tests in that directory to pass at all. Mainly this would catch
situations like fixed in a previous CL when moving the tests around
would break them so that they wouldn't even pass in C++ Nix.
For this to work, we need to track skips by basename to be
directory-independent (assuming that every skipped test name is unique
is hopefully okay).
Change-Id: If6cb63ebdef0fc19b082b6a04e79ada2e47c658e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7048
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
cl/7036 moved these paths around, but neglected to update the relative
paths they contain. Without these updated, they will never start
passing!
Change-Id: Ib16468611af59729883e501be8486f43d850fd58
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7046
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
eval-okay-eq.nix is actually an ancient test case that used the ATerm
syntax for the test result. It was disabled for a while, since the
behavior got reverted for a bit, but works on any reasonably modern
Nix implementation. This change matches my [C++ Nix PR].
[C++ Nix PR]: https://github.com/NixOS/nix/pull/7196
Change-Id: I602fd7c83a0bc104ab502c8b6a74e4591272be1a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7045
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The language test suite actually doesn't require flakes and the
new features are mostly sensible (added builtins) as well as some
tests for regressions the C++ implementation experienced.
The path interpolation test is not included in this update because there
is no way to construct an location-independent .exp file for it (the C++
repo also doesn't have one). We may still want to implement that feature
eventually (in case rnix adds support for it).
The C++ Nix revision used is ac0fb38e8a5a25a84fa17704bd31b453211263eb.
Change-Id: I75f1e780ddeeee6f6b1f28cf3c66c288dca2c20c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7043
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Since cl/7036 we have a mechanism for dealing with the nix_tests we do
not pass yet.
Change-Id: I246c52963ae7f2500253f4035a77d7006dd35307
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7049
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reimplement the test discovery of the lang tests script in Nix which
allows for a more flexible skipping logic that can e.g. react to the C++
Nix version used. This allows us to run the test suite against both
C++ Nix 2.3 and the latest C++ Nix version 2.11. The latter is mainly
useful, so we can implement newer Nix features and still verify them
against the C++ implementation.
Change-Id: I30c802844133b86b5e49f5e4f4fefacdb6215e0e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7042
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
It is helpful to be able to use the test suite as a regression test:
make a change to the compiler/vm, re-run the tests, and if there are
any failures you know it's your fault.
Right now we can't do that, because the expected-to-fail tests are
mixed in with the expected-to-pass tests. So we can't use them as a
regression test.
Change-Id: Ied606882b9835a7effd7e75bfcf3e5f827e0a2c8
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7036
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This commit deduplicates the Thunk-like functionality from Closure
and unifies it with Thunk.
Specifically, we now have one and only one way of breaking reference
cycles in the Value-graph: Thunk. No other variant contains a
RefCell. This should make it easier to reason about the behavior of
the VM. InnerClosure and UpvaluesCarrier are no longer necessary.
This refactoring allowed an improvement in code generation:
`Rc<RefCell<>>`s are now created only for closures which do not have
self-references or deferred upvalues, instead of for all closures.
OpClosure has been split into two separate opcodes:
- OpClosure creates non-recursive closures with no deferred
upvalues. The VM will not create an `Rc<RefCell<>>` when executing
this instruction.
- OpThunkClosure is used for closures with self-references or
deferred upvalues. The VM will create a Thunk when executing this
opcode, but the Thunk will start out already in the
`ThunkRepr::Evaluated` state, rather than in the
`ThunkRepr::Suspeneded` state.
To avoid confusion, OpThunk has been renamed OpThunkSuspended.
Thanks to @sterni for suggesting that all this could be done without
adding an additional variant to ThunkRepr. This does however mean
that there will be mutating accesses to `ThunkRepr::Evaluated`,
which was not previously the case. The field `is_finalised:bool`
has been added to `Closure` to ensure that these mutating accesses
are performed only on finalised Closures. Both the check and the
field are present only if `#[cfg(debug_assertions)]`.
Change-Id: I04131501029772f30e28da8281d864427685097f
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7019
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
In `a++b`, the previous implementation would move `b` (i.e. memcpy
its elements) twice. Let's do that only once.
We sure do call NixList.clone() a whole lot. At some point in the
future we probably want to do a SmolStr-type split for NixList into
a two-variant enum where one side is an Rc<Vec<Value>> for lists
longer than a certain length.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I32154d18785a1f663454a8b9d4afd3e78bffdf9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7040
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This commit adds a comment for the benefit of non-Lua-users
explaining what an upvalue is. It also adds a comment explaining
what `with_stack` does, including a brief reminder of nix's
slightly-unusual-but-well-justified handling of this construct.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If6d0e133292451af906e1c728e34010f99be8c7c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7007
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Without this change it was possible to cause situations (see the new
test) in which a `with`-namespace was forced prematurely.
Change-Id: I879ea7763b43edc693feace2c73c890d426fafd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7031
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Now that we're tracking formals on Lambda this ends up being quite easy;
we just pull them off of the Lambda for the argument closure and use
them to construct the result attribute set.
Change-Id: I811cb61ec34c6bef123a4043000b18c0e4ea0125
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7003
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Validate "closed formals" (formal parameters without an ellipsis) via a
new ValidateClosedFormals op, which checks the arguments (in an attr set
at the top of the stack) against the formal parameters on the Lambda in
the current frame, and returns a new UnexpectedArgument error (including
the span of the formals themselves!!) if any arguments aren't allowed
Change-Id: Idcc47a59167a83be1832a6229f137d84e426c56c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7002
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
In preparation for both implementing the `functionArgs` builtin and
adding support for validating closed formals, record information about
the formal arguments to a function *on the Lambda itself*. This may seem
a little odd for the purposes of just closed formal checking, but is
something we have to have anyway for builtins.functionArgs so I figured
I'd do it this way to kill both birds with one stone.
Change-Id: Ie3770a607bf352a1eb395c79ca29bb25d5978cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7001
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Since we already have infra for forcing arguments to builtins, this ends
up being almost *too* simple - we just return the second argument!
Change-Id: I070d3d0b551c4dcdac095f67b31e22e0de90cbd7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6999
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This resolves a TODO.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If4d2124648ac88094e547e1ad7f1b446feb26182
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7010
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The previous serialisation format kind of lost the information about
what AST node we're dealing with (e.g. `1234` would serialise to an
AST with a literal `1234`).
That's great for pretty-printing the _code_, but we explicitly want to
serialise how rnix-parser parses something.
To that end, literals are now instead serialised into a structure like
all the other ones (`kind: literal` and appropriate value fields).
Change-Id: I586c95d7db41820b8ec43565ba4016ed3834d1b5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7030
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Home relative paths depend on the environment to be resolved. We have
elected to do everything that depends on the environment, e.g. resolving
SPATH expressions using NIX_PATH, at runtime, so tvix evaluation would
continue to behave correctly even if we separated the compilation and
execution phases more, e.g. via serializing bytecode. Then the value of
HOME, NIX_PATH etc. could reasonably change in the time until execution,
yielding wrong results if the resolution results were cached in the
bytecode.
We also take the opportunity to fix the broken path concatenation
previously found in the compiler, fixing b/205.
Another thing we could consider is emitting a warning for home relative
path literals, as they are by nature relatively fragile.
One sideeffect of this change is that home path resolution errors
become catchable which is not the case in C++ Nix. This will need to be
fixed up in a subsequent change.
Change-Id: I30bd69b575667c49170a9fdea23a020565d0f9ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7024
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
To assert that OpFindFile is only emitted for specially compiled SPATH
expressions, as well as make sure it doesn't accidentally operate on
“ordinary values”, introduce an UnresolvedPath internal value. If
OpFindFile sees a non-UnresolvedPath value, it'll crash.
Note that this change is not done purely for OpFindFile: We may want to
compile SPATH expressions as function calls to __findFile (like C++ Nix
does) in the future, so the UnresolvedPath value would definitely need
to be an ordinary string again then. Rather, this change is done in
preparation for resolving home dir relative paths at runtime (since they
depend on the environment) for which we'll need a similar mechanism to
OpFindFile.
Change-Id: I6acf287f35197cd9e13377079f972b9d36e5b22e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7023
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
For optional outputs (runtime trace & AST) this has a slightly nicer
user experience.
Note that the code of this is a bit verbose because doing a naive
implementation hits dumb behaviours of browsers that result in
infinite loops.
Thanks Profpatsch for the suggestion.
Change-Id: I8945a8e722f0ad8735829807fb5e39e2101f378c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7006
Reviewed-by: j4m3s <james.landrein@gmail.com>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This uses the JSON serialisation of the AST introduced earlier to
display a text box with the serialised AST to users. Useful for
debugging.
Change-Id: Ibc400eaf5ca87fa5072d5c044942505331c3bb40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7005
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
This implements serde::Serialize for the rnix AST through a wrapper
type, and exposes a function for serialising the AST into
a (pretty-printed JSON) string representation.
This can be used to debug issues with the AST, and to display an AST
reprsentation in tools like tvixbolt.
Serialize is implemented manually because we don't own any of the
structs and the way to traverse them is not easily derived
automatically, and this is quite verbose. We might be able to condense
it a little bit, but at the same time it's also fairly straightforward.
Change-Id: I922df43cfc25636f3c8baee7944c75ade516055c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6943
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Lambda has a quite large and variable-sized runtime representation,
unlike Rc<Lambda>. It would be easy to accidentally call clone() on
this and create input-dependent performance regressions.
Nothing in the codebase is currently using Lambda.clone(). Let's
remove the derived instance. If it's really needed it is very easy
to add it back in, but whoever does that will have to look at the
struct they're adding Clone to, which will hopefully prompt them to
think about whether or not that's really what they want to do.
Change-Id: I7806a741862ab4402229839ce3f4ea75aafd6d12
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7029
Autosubmit: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I believe this variant is left over from a previous implementation.
If not, please let me know.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I02a3bf2f63794d09e96a5a92a034c0ad3d1ff221
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7027
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is useful when first setting up a device. Call `passwd` afterwards to
imperatively change the password.
Change-Id: I070f1cfaf05a38844ee363be4d511035e77096d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7013
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
