Usually the current behavior is best: You are dropped in a REPL with the
package(s) you are working on already available. As you are working on
them, you recompile individual files and your changes become available.
However, I've found that there are some occasions when this is not
desireable, e.g.: When you are working on something and have broken the
test suite intermittently, it becomes impossible to start a new REPL.
Not sure how the yes-or-no-p question should be phrased, its negation
may be better?
Change-Id: I6a37ebc02f3121f628fc9206e0de650851824cd6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8415
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is the new address which leads to the public inbox at inbox.tvl.su
Change-Id: I45d98a373b8acda49b05c4f74669ffb9ad1f1a3c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7632
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This adds a new function (intentionally bound to a rare key (Q)) in
the push menu which can push a *private* change to Gerrit.
A private change is one that, until submitted, is only visible to its
owner and all explicitly added people (reviewers, CC).
Change-Id: I6ee13dbbad099584475d3efac96e5d9b86efbc26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6061
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
The function is depot specific and thus uses tvl-depot-path, so it
belongs in `tvl.el`. Since non-sly-users won't need it, we tie its
definition to loading the sly package.
Change-Id: I8b104deab455d218d3df6a800e35cc104220a841
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4960
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
We can't use cl-lib as that apparently doesn't contain lexical-let*.
Change-Id: I8e65d20215ae5667bb92b71e6318ad9d66125320
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4941
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
A formatting error broke this at some point (the let clauses were
outside of the definition list).
Change-Id: Iaa2dc9ad02d2f7e909ca9bf28705e782ad26060b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4765
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Prompting with "Checkout CL" for the gerrit cherry-pick command doesn't
make any sense.
Change-Id: I51495e7975202146fae2da0807e525596f2d490e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4516
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
as before, fifth doesn't exist on all emacsen, but nth definitely does
Change-Id: Ic0e4e3790402d960d1546d37187758a4d9ca33c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4346
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The l= is part of the command, not of the shape of commands, and the
previous command concatenation logic was wrong because of that.
Fix is done in the most obvious way: Make the l= part of the command.
Change-Id: Ia3c08c3da60fe5fc38f29a2d94adcd123e4f3052
This makes this function a true rubberstamp again, leading to
rubberstamped CLs automatically being merged after CI passes.
This is similar to the initial functionality we had last year, where
this directly submitted changes, but with the addition of the CI
checks.
Change-Id: I946b074b968eb18a64c4edb0043f7a4af28759b4
This almost makes for a sort of fire&forget button, except we don't
have a way to automatically pick reviewers yet :)
Change-Id: I6f446270f8aaf0409ccb6321bdbb5c349079cd19
Bound to `A g`, this behaves similarly to `magit-gerrit-checkout` - it
prompts for a CL number, then cherry-picks the latest patchset of that
CL number
Change-Id: Ieef970b99d96170e8c960cc7687ead9022948f8b
Adds all the functionality described in the README in cl/4066.
This code is very closely related to //users/tazjin/russian/russian.el
Change-Id: I14f1052cebfbe4886e75e8efc730eacbf8773f29
Passively is a tool to help people learn information via Emacs,
designed for language learning.
As of this CL, the actual implementation still lives in
//users/tazjin/russian/russian.el but I am generalising it here.
Change-Id: Iac5a8cfc78415496637a7ba5ddc4c2a1aa6bee26
Add a new magit-gerrit-checkout command, which prompts for a CL number
then fetches and checks out the latest patchset of that CL with a
detached HEAD.
Change-Id: I88b8209d40017479d97ed40ecbd5fd1ccd7cf650
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3880
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This fixes all compilation warnings except the one about 'tvl lacking
a parent group, which we can look into later (it doesn't matter that much).
Change-Id: Iaff5e7f5f251f0670afb0a47031ccf197de69818
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3408
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
I'm using gerrit at work now, and would like to use tvl.el to interact
with it via Emacs, but we use a different default branch than "canon".
This makes it configurable, and also marks it as safe so I can configure
it in .dir-locals.el
Change-Id: I66d4c7ce94351f2df863ec49dbc3e1d1d6d1547a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3369
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Adds a new internal builder that makes it possible to override the
`emacsPackages` passed to our Emacs packages, which in turn makes it
possible to inject them into the emacsPackages fixpoint and use them
with features like Emacs native compilation.
Change-Id: I80dad57115c83cf5693ae6ba4e4cf3105d103d5e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3003
Tested-by: BuildkiteCI
Reviewed-by: adisbladis <adisbladis@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Rename my //users directory and all places that refer to glittershark to
grfn, including nix references and documentation.
This may require some extra attention inside of gerrit's database after
it lands to allow me to actually push things.
Change-Id: I4728b7ec2c60024392c1c1fa6e0d4a59b3e266fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2933
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: glittershark <grfn@gws.fyi>
It was only used for #'-each, for which the built-in dolist is sufficient.
Change-Id: I326d8b733b36b2edfebd4e9384e70b8a570fee0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1987
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Archiving notes is done by just changing the filename to an `archive-`
instead of `note-` prefix.
Unarchiving is not yet implemented and should be done by moving the
note to a *new note ID*.
Archiving is bound to 'a' in the note list.
Change-Id: I8c225a25bdac5147a26030f47f24edee497f69df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1986
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This mode displays the note's timestamp in its header line, and the
content in its body.
Some rudimentary key bindings are set up in the list view to view
notes in full (RET), and in both modes to quit the current buffer (q).
Change-Id: Icb35baec220a9efcfa2b86617b16178669df996f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1985
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Adds a very simple initial display of all notes in chronologically
descending order.
Currently this is a read-only view with no available actions.
Change-Id: I6d47363909f1a9ab8d1d18a1c44966883aa758ad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1983
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
I'm writing a note taking system because I don't like any of the
existing ones.
This adds a note-taking function which prompts the user for note
content and persists it in a user-configurable directory.
Next steps are roughly:
* listing notes
* editing notes
* archiving notes
At which point I would consider this functional. The idea is to keep
adding incremental improvements that fit my workflows after that, and
if it ends up being useful for anyone else - great.
Change-Id: I7ae0eb4015511ebdbaeff92d8d32502726eb57c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1981
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Since upgrading to Emacs 27 I have observed a strange behaviour where
this terminal switcher sometimes fails to select a valid buffer, in
which case it falls through to the case that just opens a new buffer
instead.
This is kind of annoying and to aid in debugging this change makes the
creation of new buffers explicit and fails if no matching buffer is
found.
Note that this is likely not a fix for the issue itself, but it will
help debug what is going on.
Change-Id: I906869aba7d25156aaf92c090b169ce02785b85e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1930
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Now that we're requiring CI to verify all changes (yay) it's not
actually possible to push and submit in one go - this repurposes the
rubberstamp command to push and self-+2, which is still useful for
self-owned things like system config etc.
Change-Id: Ie064adb6b7b0c1fd6bffdf4583a201ea02d4f8ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/939
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
P W, to push as a work-in-progress CL
Change-Id: Ibc6973512e8dcd3ce77b2f1064906a98e9a3a182
Reviewed-on: https://cl.tvl.fyi/c/depot/+/575
Reviewed-by: tazjin <mail@tazj.in>
This function opens the depot in magit. By default the depot path is
assumed to be `/depot`, but that is made available as a customise
option that users can override.
Change-Id: Iefc127cad515dbae330d7af3aa69a0c53aa02015
Reviewed-on: https://cl.tvl.fyi/c/depot/+/504
Reviewed-by: glittershark <grfn@gws.fyi>
Introduces two new shortcuts in the magit popup for pushing:
* R: Push for review
* S: Push to submit
The existing "P" command remains, but has been renamed to
"rubberstamp" and documented with a warning.
To make this work across people's different setups, customisation
options for TVL-specific code are being added.
Change-Id: I48e75db55b5f793342fc898093629e437f58dcb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/503
Reviewed-by: glittershark <grfn@gws.fyi>
Add a simple tvl.el, with only one magit transient command to push and
submit in one go to Gerrit
Change-Id: If02065797a8db39669b85acf87a1c4b43d1482ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/494
Reviewed-by: tazjin <mail@tazj.in>
These records have so many fields that it's difficult to track what's
what in a long list. For convenience they're now specified in plist
format (see the example).
There isn't really a point to this because the SOA record is the one I
care the *least* about practically as Cloud DNS sets it for me, but
whatever.
This advice is potentially defined before the autoloads for telega
have run, which means that the macro-expansion fails and
`telega-ins-fmt` is looked up as a function.
With this setup the initialisation works as expected.
The lambda that acts as the sentinel for building SBCL with packages
needs to be able to capture variables if lexical binding is enabled,
which is made possible by the lexical-let form.
Adds a function that can launch Sly with a pre-configured SBCL for a
Lisp derivation in the depot.
This makes it convenient to spin up development environments for Lisp
libraries and programs by simply calling `M-x nix/sly-from-depot RET
tools.something`.
This relies on `nix-depot-path` being configured currently as I have
not yet reliably added the depot to my NIX_PATH on all machines.
