adisbladis fixed the tdlib/telega versioning issues in nixpkgs at some
point, so this isn't required anymore.
Change-Id: Ib98e73d0e4394765f08f5f3741f70adab459c22f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2909
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This configures accepting requests for b/ and cl/ on plain HTTP ports,
and redirecting to b.tvl.fyi & cl.tvl.fyi appropriately.
Additionally, Panettone request URIs that only contain decimals are
redirected to `/issues/$request_uri` to enable issue short-links.
This fixes b/32.
Change-Id: I56954d8d69a3624267778b467520c509f4daa6c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2908
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
nixpkgs_exposed is going away, and the haskell overlay is independent
from that.
See also b/108, cl/2910
Change-Id: I3aea6dfc427a914f3f88146fd0b45d60dfd45a1a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2918
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is part of paving the way for clearly distinguishing between
packages from nixpkgs and //third_party.
See also: b/108, cl/2910
Change-Id: I28b5abd1f0f9fa3c4478c9f255b2025f4a4139f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2917
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: tazjin <mail@tazj.in>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
This commit cleans up a huge chunk of these uses in //ops
Change-Id: I00faeb969eaa70760a26256274925b07998c2351
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2915
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
Change-Id: I49d82726b2f3bd7d4923effdd9a7e3f67ddc0659
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2916
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
This commit cleans up a huge chunk of these uses in //fun
Change-Id: I45a7b392a9749fa7859ff5100dcea415bda807c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2914
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
This commit cleans up a huge chunk of these uses in //third_party
Change-Id: Ic382c0cdea7330a84d5f0b7d109c824ddceb94e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2912
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This should ease migrating to a distinction between depot.third_party
and pkgs (as in nixpkgs) in the future.
Ref cl/2910, b/108.
Change-Id: I53a854071fddd7c0d0526cc4c5b16998202082c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2913
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Emails for (re)opening and closing where send out with the user's DN in
the subject which is probably not what we want.
Using displayname-if-known is probably not necessary as there is not
really a case where (not *user*) wouldn't justify a 500 in this context.
Change-Id: Id12d3d9619f42eb5337c2d3482b7c1646b5d6a81
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2911
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This lets us grant permissions to them, e.g. on local folders.
Change-Id: I823ac414be1cb7d6baa4f17d95003709e5911b04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2905
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There will be more Buildkite-agent specific configuration, and it's
already more than just the module setup, so extracting this makes
sense.
Change-Id: I56ce205c0cb4365317ed7ed5f2d525a0b425b861
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2906
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Add kolide, the endpoint monitoring system / MDM we're using at work, to
the system derivation for my work computer.
I hate MDMs almost universally, and this one is no different, but SOC2
waits for no one.
Change-Id: I99bcb5341182a81512699d50b279efd9e1b2194b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2903
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
This small(*) pile of JavaScript queries the Buildkite API for the
latest builds for the depot and displays the results in the rebooted
Check UI.
Change-Id: I7025a1c6d0d0afa000a9df4682133e03824ea10d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2881
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This is just going to be a grab bag of things which do TVL-specific
things to Gerrit, whether that be exposing new Prolog predicates or, as
I intend to do as the first thing, expose Buildkite builds as checks.
Change-Id: Iaeab987a1fdbd078b85e274691c986489903bf3a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2872
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Writing Gerrit plugins that don't use the in-tree build system is more
convenient if the API is actually exposed in the derivation's output.
Change-Id: I3408d35498ca879576d532b005e36fde8ff2ea61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2871
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
drakma ignores the :external-format-in parameter if :want-stream is t:
> If want-stream is true, the message body is NOT read and instead
> the (open) socket stream is returned as the first return value.
> If the sixth value of HTTP-REQUEST is true, the stream should be
> closed (and not be re-used) after the body has been read. The
> stream returned is a flexi-stream with a chunked stream as its
> underlying stream. If you want to read binary data from this
> stream, read from the underlying stream which you can get with
> FLEXI-STREAM-STREAM.
Since it doesn't return a plain CL stream which would just work with
SBCL, we need to set the external format on the resulting flexi-stream.
Fixes b/107.
Change-Id: I6e3178123c0927ef21fabf8118d9d357c8afbd42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2869
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
Move the common part (encoding/decoding json and connecting to cheddar)
into request-markdown-from-cheddar. The two render-markdown
implementations are now only thin wrappers around that function.
Change-Id: I81bb34b684af44228dcad02fca541082e6d060ce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2868
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Having a space between the number and the unit is not valid CSS.
I was aware of this problem, but apparently forgot to amend the fix.
Change-Id: I74936db515799763038669d0a11da53f28f722be
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2867
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
This simpler, curl-based HTTP client (which I wrote years ago) is a
first step towards cleaning up the dependency mess of converse.
Dependency stats: +4, -28
Change-Id: I4f5f3c9307895d261bfb0a6bcf2337b747f9a4c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2859
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This does not yet change up `extern crate` and `macro_use` statements,
but since we still depend on Diesel that also wouldn't work right now.
Change-Id: I36de1b7b56f7d220f567346e13bad8da06461517
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2858
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This project depends on Tokio, via actix, and both of those are bad
ideas. This wasn't as clear 3 years ago as it is now, but to
demonstrate it the project has amassed issues which required at least
this minimum of changes to be buildable in 2021 (using a modern
rustc).
Yes, this adds dozens of new dependencies again (because of a
top-level update) but don't worry: They will be gone when I'm done
here.
Change-Id: I1dde9dc0325da7bdcb6608359fab33e27692dc1d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2857
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Imports the converse forum software I wrote a few years ago. I want to
clean this up a bit and try using Hotwire with it.
Note: The original repository was AGPL-3.0 licensed. I'm the copyright
holder and have relicensed it to GPL-3.0 in the commit that is being
merged.
Imported from: https://github.com/tazjin/converse
git-subtree-dir: web/converse
git-subtree-mainline: 386afdc794
git-subtree-split: 09168021e7
Change-Id: Ia8b587db5174ef5b3c52910d3d027199150c58e0
The whole pass the name of the status as a string thing was mostly born
out of an overeager use of yants. It is still very neat especially for
common cases like "OK", so we'll keep it, but also allow passing the
integer variant of the status as well which probably feels more natural
for a lot of people, especially over getting the casing right for
"I'm a teapot".
Change-Id: I3f012a291447ef385efdd28132292a8b331998c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2850
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We can actually catch some errors that may be generated in bubblegum
applications where we can report them to the user in a way that doesn't
require curl -vv:
* Type errors in the status argument: By removing yants completely we
not only (presumably) gain some performance, but also the ability to
return an internal server error on an unexpected type instead of
throwing.
* User generated evaluation errors: by using builtins.tryEval we can
catch throws and asserts the user inserted when generating the body
and report to the user that something went wrong. To do: also support
for the headers.
Change-Id: I8363b9825c6c730e624eb8016a5482d63cbc1890
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2849
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Having a slow cache is better than having no cache.
Change-Id: Ie3cfcd4a2937d90b0e2ad899816bc31ae806631f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2847
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
This way we don’t have to explicitely wrap the rust crate with a
`testRustSimple`, but it will be done automatically, unless `doCheck`
is set to `false`.
Change-Id: I32a81821eeff620e7da57332b0873495bb85a843
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2841
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
email.lisp was missing from the buildLisp derivaation's source files,
which meant that none of its definitions were being loaded into the
image even though the package was defined by packages.lisp.
As an aside, this really should've broken the build - we got a
style-warning in panettone.lisp for referencing the missing definitions,
but that only surfaced as a warning, and ended up breaking once deployed
Change-Id: Ie99c3efeef8e6943aa1f9cfc426957d622c2d718
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2845
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
We override the default `buildRustCrate` with our default options.
Kinda amazing how many crates still default to the 2015 edition;
probably to be backwards compatible with older compilers?
Change-Id: Ic571f527b1575a03b8b58e6b75bcf12c4b9b7d9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2842
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Add a little bit more information to issue notification emails,
including the IDs of issues and links to the issues themselves.
Change-Id: Ia54209f936a37c6dbdb60ebff5bb8c1034cffc9a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2809
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Send notifications both to IRC and email when issues are reopened after
being closed
Change-Id: I3a63419c6547ac28eeaafbe212a2a01a5fc2b5af
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2808
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Send notification emails to the same group of users who receive
notifications on issue comments when issues are marked as closed. This
also takes the opportunity to generalize issue notification emails a
bit, and lay the groundwork for (but not implement) explicit issue
subscriber lists.
Change-Id: Ie2572ed3ad0207d415b4c362438f772925e7a2c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2807
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Add a user settings page, with a single checkbox that allows disabling
receiving all email notifications.
Change-Id: Ibef2a497cd59f93b695ff8b9cd36047e514e00c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2806
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
When a user posts a comment on an issue, send email
notifications (respecting the enable-email-notifications setting) to the
author of that issue and all the other users who have commented on that
issue. Since the oauth & gmail API stuff that the relay does is slow,
this happens in a background thread.
Change-Id: Ic00c265deab1030d9ba64c29c9f56314dd179141
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2805
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Add a new package to panettone, :panettone.email with functions to send
email notifications to users through the SMTP relay on whitby,
respecting the value of `enable_email_notifications` on the
user_settings table.
Change-Id: Ia4ec65965abda06f1fadb178143d66bb8eae6482
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2804
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Add a new user-settings table and dao class, with a flag that allows an
individual user to disable receiving email notifications
Change-Id: I537bfca74490941934c0adc7328bcd6ed5c9c0b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2803
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
This reverts commit f59c6214c4.
Reason for revert: new gerrit's JS appears to not have compiled correctly; rolling back until I can figure out why
Change-Id: If16fe341aad25bef30ed7be8c6ac49cadf2a732c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2821
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
A bit less noisy in the definitions and the nix parser can already
detect it being misspelled.
Change-Id: I979da11471187e36cde5c015aaf654f925757a8b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2814
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
I think it is good practice to always get dependencies from the depot
fix point if they are exposed. The reasoning for this is that if we
improve the support for overriding in depot, say by introducing a
depot.extend functions or even full blown overlay support, this will
already work as expected.
Change-Id: Ibb8dffcf32e8f46817a2db2da26139fabdce55bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2770
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
