Want to be able to make changes with low overhead, and having it in a
separate library is just annoying.
Change-Id: I30b76885d8e0e6ebaefe9506cf36672783ed4988
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12577
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
the linters & prettier config should apply to my whole subdir.
This is somewhat nasty, you have to `npm` in the toplevel dir before
it starts working, otoh dev tooling is dev time and I’m working on
these alone.
Change-Id: I96721f549b24a40b7ffbb2d310f37a40d2590b2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12573
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Add a tapping command that does not quantize the timestamps.
For the silence warning, we make it BPM-dependent (defaulting to
120BPM as everywhere else), meaning for slower songs we give a higher
possible time difference before we display a warning.
Change-Id: Idefc44166639b23c2105a1a810ac22ed84457225
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12563
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
That was the original intention, but I didn’t understand that lua
would fail with "r+" if the file does not exist (and "w+" truncates
the file, so you have to try "r+" and then fall back to "w+" which
will create the file as well.)
Change-Id: Ib238f0b73ab403ceeaf035d053a14eba718d1b48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12562
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This adds support for uploading the lyrics part of an .lrc file to
lrclib, see https://lrclib.net/docs
I pretty much only used ChatGPT to translate the rust “proof of work”
challenge to nodejs and it worked first try lol.
Before uploading the lyrics, I construct a webview with a preview of
what is going to be uploaded, and then only upload when that is
accepted. Pretty sweet.
Also adds two commands for increasing/decreasing the current timestamp
by 100ms and starting playback from 2 seconds before that, very handy
for fine-tuning lines.
Change-Id: Ia6adfe26d0c21c62554c8f8c55e97e2caec95d1e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12561
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
If the bpm header already exists, overwrite it with the new value.
Also use an existing header as suggestion.
Change-Id: If6431e8056504db437c31313d885b5ba0d0e55d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12553
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Insert the length and stuff into the .lrc file headers.
Change-Id: Id2565c95c516208f1e46b79d5b8da50f3d6bee62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12552
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
It’s a bit crappy and really depends on the input field opening
quickly again (which it often doesn’t really do…), but it was the
easiest way I figured how to do it haha.
Aligning to eigth notes is pretty much the easiest way to sync
everything up after tapping in the timestamps (for most songs).
Change-Id: Ibbb072f62b6ee17d983e81b6c1554bc3516fa636
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12551
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
* tap-bpm: simple CLI program that accepts key inputs and averages a
BPM value
* lyric-timing-mpv-script: If you press Ctrl+l, mpv attaches the
current timestamp to a .lrc file named after the song.
This is for manually timing missing songs for uploading them to
https://lrclib.net/
* extension: vscode extension for `.lrc` files, currently with the
following features:
1. A “jump to LRC position” command which reads an .lrc timestamp
from the current line and expects mpv to listen on
`~/tmp/mpv-socket` (via `--input-ipc-server`), and will seek to
the exact timestamp (down to the ms) in the currently playing
song.
2. Some initial linting warnings
- A lint that warns if the difference to the next timestamp is
more than 10s (which usually means there’s an instrumental and
the previous line is stuck)
- A lint that checks that timestamps are monotonically
increasing
Change-Id: I32a4ac0e2c5bbe3d94e45ffcf647f81bc7c08aa0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12537
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Leaving out any symbol characters improves the search accuracy.
Change-Id: I00c993d4099bb8e9701783b53afc9423f1b2f674
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12480
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
We wanted to enable this earlier but the log level of many of the
messages in redb were too high, they've now been downgraded, so we can
enable logs from redb.
Context on the fix and release:
- https://github.com/cberner/redb/pull/828
- https://github.com/cberner/redb/releases/tag/v2.1.2
Change-Id: I8635e8a0bcb01a7d0b580387ac9134ccdd0205f3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12568
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
It prevent some shortcuts from being used the "natural way", like
only being able to type Ctrl-Alt-T with the left hand.
Luckily, RALT isn't needed that frequently, so we can expose it right
next to GACS (on the G and M keys).
Change-Id: Iccba3b1f6a5e2b01195f87471fd9972967b4e175
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12572
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Over the past couple of months we've been using redb instead of sled as
the default filesystem-based database in PS and DS. I am confident that
we can get rid of sled completely now, and just keep redb.
Change-Id: I11fa1e4453e280253855f8eade990b37eb6965ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12567
Reviewed-by: yuka <yuka@yuka.dev>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Previously the script ignored workspaces that were further up, but in practice I
don't care about their order, I just want them to be gone.
To keep IDs stable, this implements a fix where the current workspace is first
moved to the first position (invisible), and windows are then reaped afterwards.
I've tried this in various combinations and it seems to work fine.
Change-Id: Ifc3eb272af761670ec83305665ec2103eb4f269e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12564
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Previously, the overlap calculation would underflow when
the pattern is empty.
Change-Id: I1f6bf49fafc4b8183a3a5e5e491a5a5bfc41ca97
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12558
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: yuka <yuka@yuka.dev>
With https://cl.tvl.fyi/12533 in, we still need to lookup references to
properly populate `BuildRequest`.
It currently fails as the reference to
h9lc1dpi14z7is86ffhl3ld569138595-audit-tmpdir.sh is not propagated.
We should prevent Frankenbuilds from the go, so let's update our
PathInfo type to accomodate for that.
Change-Id: I26f9215312c258bba222efd390bc135f1a3a3d6d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12560
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This is just patchset 10 of CL10855, before the color_eyre changes,
rebased to the tvix_castore api.
Change-Id: If4b42412ff8568058908cda971ad7d6f2d9f9b7b
---
This provides a build service invoking runc. It can be used by using the
`oci://$path_to_some_tempdir` builder URL for now.
For now, it can be tested as such:
```
BUILD_SERVICE_ADDR=oci://$PWD/bundles target/debug/tvix
let pkgs = (import <nixpkgs> {}); in builtins.readDir pkgs.perl
```
readDir is to actually trigger IO into the store path (which triggers
the builds).
For now it fails due to missing reference scanning (see followup CLs).
Change-Id: I09b40e410114ce69966a41a0e3c33281b859e443
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12526
Autosubmit: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
After this, attempting to build the nixpkgs still fails in the same way,
because the references are not yet properly used by the code at
`tvix/glue/src/tvix_store_io.rs`.
Change-Id: I8a59ef8ef3c9a6f6aa7b05106dd9eef2e9ac0d0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12532
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This provides a generic interface to let the builder search for needles
in the output, as described in the notes at `docs/src/build/index.md`.
Change-Id: Ic2c5bd563e9aa2e766c157f2b13cdb19aede12f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12531
Autosubmit: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
This changes the only actual state the ReferenceScanner has to use atomic bools, so it no longer requires a mutable borrow for .scan(). This allows passing an immutable borrow of a reference scanner to multiple threads which might be ingesting blobs in parallel, and using
them in the ReferenceReader or calling .scan() there.
Change-Id: Id5c30bcebb06bf15eae8c4451d70eb806cab722e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12528
Autosubmit: yuka <yuka@yuka.dev>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We don't need to access castore for HEAD requests.
Change-Id: I9365d9520d5a9e52ed92897d3c4972ec5b6e11fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12547
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
With an implementation of AsyncRead + AsyncSeek, axum-range can answer
range requests.
We only use it if a range has been requested, as it uses more memory
than the linear variant.
Change-Id: I0072b0a09b328f3e932f14567a2caa3a49abcbf7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12509
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: yuka <yuka@yuka.dev>
turns out emacs over ssh forwarding works well if you use ssh -Y
Change-Id: I9c1134d880265b765b0dc52d587ee331fda29f7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12546
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Instead of installing and configuring fuzzel and wl-clipboard locally, put them
into Nix, too.
Change-Id: I4b909ac1d0577f8bd176bbaae71583c59aaf5362
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12544
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I think that's the last module I was missing for this to be "feature-complete".
I think ideally the things displayed by the taskbar would have the same order as
the current Niri layout, but I can tackle this later. This might require a patch
in Niri.
Change-Id: I67cc2366b6c510830021954372e29ce0be7d8363
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12543
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
If the user puts in a string that doesn't match any of the selectables, do one
of the following:
1. When called inside of Emacs, create a new buffer with that name.
2. When called outside of Emacs, do nothing.
Change-Id: I92ba985b5cd7805d37d5d0e0631b20fdce7ce479
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12542
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Adds a command which can invoke something like fuzzel (or any other dmenu
compatible system) for the buffer switching logic.
This can be invoked as `emacsclient -e (niri-go-anywhere-external)` from any
shell, given that the Emacs server is running in the given Emacs.
Change-Id: Iafa421e5ad0c3c6cbfecbfc0835e6db878e452e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12540
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Adds a completing-read annotation function which can display the "remoteness" of
Emacs buffers, as well as the app ID of Niri windows.
Change-Id: I15550f7403b91aa4be7076290931da74ac539fac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12536
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Introduces a new buffer switching function which is also capable of switching to
existing Emacs frames that already display the target buffer, or to other
windows displayed in the same Niri session.
Not all behaviour is done yet, and there's an explanatory comment in the package
with more details.
Change-Id: I5a548931a681ba32fdb352ecec66845a75268c19
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12535
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This release includes support for overlay filesystems
Change-Id: I946cbf346df045209afaea2d720bb57fc2f2659f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12538
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
