There’s a bunch of duplication in how http client things are done,
let’s move that all to a single module.
Change-Id: Ic08c9bce49d562e4fa640a5bdfc15973a28a7bcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12135
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Start of an effort to make the app work without javascript
enabled (graceful degradation yay).
We use a trick where buttons are nested into a form element, passing
their value as input; this should be better than depending on
`hx-vals`. If htmx is disabled, just redirect and reload the full page
instead of sending back the snippet. Probably depends on the use-case
of each snippet though.
Change-Id: I6c73e624c4bd29b1cbd5492b2f84f48102edc68b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12056
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This can be used as a reference for how to build a wasm project with
crate2nix.
Change-Id: Ib4d0db6bf24d8f1dec4734d5f1e8de19212a54cd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11859
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
See https://github.com/NixOS/nixpkgs/pull/323753 for details.
Changes:
* git: temporarily comment out dottime patch (it doesn't apply, but it's not critical)
* third-party/cgit: use an older git version where dottime patch still applies
* 3p/crate2nix: remove crate2nix patches included in latest release
* tvix: remove unneeded defaultCrateOverrides (upstreamed to nixpkgs)
* tvix: regenerate Cargo.nix
* tvix/nix-compat: remove unnused AtermWriteable::aterm_bytes pub(crate) function
* tvix/nix-compat: remove redundant trait bounds
* tvix/glue: use clone_into() to set drv.{builder,system}
* tools/crate2nix: apply workaround for https://github.com/numtide/treefmt/issues/327
* toold/depotfmt: expose treefmt config as passthru
* tools/crate2nix: undo some more hacks in the crate2nix-check drv
Change-Id: Ifbcedeb3e8f81b2f6ec1dbf10189bfa6dfd9c75c
Co-Authored-By: Florian Klink <flokli@flokli.de>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11907
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This now exists in nixpkgs, and a more recent version of it.
Change-Id: I51fe038ba9459587952028f77e97b48212d13e74
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11762
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
* Try to convince libinput (seemingly futile) to change the trackpad behaviour.
* Make XFCE available to debug the EXWM hangs on this CPU.
Change-Id: Iff7189127c849beaf7ded3927abd14b90cf6b9fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11775
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Chromium or something keeps barfing conflicting mime-types files, which causes
the entire home-manager activation to fail.
I'd be fine with it just overwriting those files, but couldn't be bothered to
figure out how to configure that, hence just use the fix from its error message.
Change-Id: I2e4e0807339dd426b3d99578d0d004529403a882
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11769
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Prepares the pre-installation config (before actually running the installer on
the notebook and dumping out a hardware config etc.).
Change-Id: Ia74c4bfa298738cbf8c4034c22d9f8b51c7e67e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11765
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
If a system doesn't have an overridden home config, just use the shared one.
Change-Id: I6a61f02ec49bfbf0057be7e6481847ee053e7fda
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11766
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
One of these things that I manually install on all machines, that
might as well be in a module.
Change-Id: I2b3005157ce48a144262cd38df22cbe513039021
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11764
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* agenix has not been updated (https://github.com/ryantm/agenix/pull/241).
* wasm-bindgen bumped to 0.2.92 in Rust WASM projects
* 3p/lisp: port lispPackages from stable channel
The Lisp package set we are using (`pkgs.lispPackages`) is the "old
old" package set, whereas we were supposed to have been using
`pkgs.lispPackages_new` (which is the "old new" package set).
Either way we missed that train, and now there's a "new new" package
set, but with a twist: Lisp packages in nixpkgs are now tied to
their compilers, so the most generic way to access them seems to be
from `pkgs.sbclPackages`.
Switching to the packages from the "new new" package set doesn't
work: Lots of stuff stops building if we just switch the sources
over, and not everything is trivially fixable.
For now we stay on the lispPackages from the stable channel. We need
to look into the migration later.
Or rewrite panettone.
* tvix: update generated protobuf files
* 3p/nixpkgs: pick trunk from stable channel; newer versions try to
read files and do network I/O during build, but don't print enough
details in error messages to figure out why.
* 3p/overlays: remove tdlib override (nixpkgs is currently new enough)
* 3p/overlays: override telega.el sources while updates are lagging in
nixpkgs
* users/flokli/ipu6-softisp: update firmware paths, which NixOS now
stores zstd-compressed.
Change-Id: I5a7a6c8b5d0688461bca92b9e6d654356d3a1cf1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11711
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
I keep setting these manually whenever they annoy me too much, but why?
Change-Id: I3a12dee51fd567a5f997005b277f099254e7f6d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11748
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
The redacted URL needs the torrent group id to go to the album page,
not the torrent id.
Also open the external link in a separate tab.
Change-Id: Ie6d73cb02137855bb388859d2800968cd56ece49
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11745
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
We’re using the redacted id, not the database id.
This is more stable.
Change-Id: I4d24e5bc6cc469d811cb1402a83157359576ef77
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11683
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This took a while to figure out, but essentially sorting a thing with
one million queries takes a long time, as compared to doing it on a
small subset of things and then joining against the final ordering.
The generated column helps, too.
Change-Id: I1bf283e2be060748eebda92576e3d062c51a6777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11681
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Generated columns!!
This reduces the query time for distinct on somewhat!
Change-Id: Ic004d327b719a9f44a224ec87709992ce3d8f160
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11676
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Simple artist album page that only shows albums the artist was
involved with.
Change-Id: Icff34afc6d1b39b6fb17765c1b3ea500dd4b4d95
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11675
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
The seeding weight would slow down the query quite a bit, so let’s
move it into a procedure and add an index onto the torrents table that
caches the result.
Baba’s first pl/SQL function!
Change-Id: I3bc6919b115c02b9c9aa74702fac0a8bbc66d2c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11674
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
The logic around transmission session handling was f*cked, this fixes
that.
We use an IORef instead of an MVar, since we want to unconditionally
write the new value. Even if multiple requests race, I *hope* that
transmission returns the same session id, otherwise we might get a
request loop. But it should be fine. (The semantics is not nicely
documented in the RPC docs.)
Additionally, log the session ids in the requests.
Change-Id: Id7d33f8cb74cb349e502331cad5eb5abe8a624cd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11673
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
apparently the `torrent_group` json only contains one artist, while
the torrent itself contains a list of them.
This is important, because we need the artist id and the
`torrent_group` does not provide it, only the torrent one.
Change-Id: I3db45f454f14e89ea8c8dafba2065ecd55f5bcda
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11670
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
We want the user thingy to see which error happened; it also gets
logged in the traces as before.
There’s another function which we should replace as well at one point.
Change-Id: I3d49edccd0e2088a45ac0138af9536b40dfa6848
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11660
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
The pool library would always take out the most recently used perl
resource again, and since that is the one that we just spawned, we’d
be back at square one. Instead, we try to find an older one (or up to
200ms old) and use that instead, because that should be the one with
the fastest response time.
Okay, that was enough bullshit lol.
Change-Id: I6b999e682d02ab03206a9d1b707edf16daa04a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11657
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Instead of opening a separate span, we just add events for start and
end of formatting.
Change-Id: I26f6792dfdcd23c01cff415fa0f436d6a22d93fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11655
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
It does chip of the init overhead of like 50–100ms, even though the
formatting still takes quite some time (up to 200ms for more complex
expressions).
Maybe we need some simplistic formatter in the future that just splits
on parens? It’s not an easy problem …
Change-Id: I2ce951e6b3c2dc56294b1bdab913480727b50f0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11654
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
