This client definition was previously nonsense. What happened is that
I accidentally imported the client as an OIDC client, which Keycloak
accepted because apparently those are the same entities on the API
level, and that ended up getting mangled into some broken hybrid shape
by Terraform.
This sets up the Buildkite provider again but with the correct
SAML configuration this time.
Change-Id: Id7ba318984d2fcc9e2ca91ed45ccbfd227278bbe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4731
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <mail@tazj.in>
Produces more useful output and also makes for a good target for the
upcoming extraSteps logic.
Change-Id: Ifd389d433d9e27f97940a48999f4fba35646e37a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4727
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Extracts the logic for generating our Buildkite pipeline (which has
been copy&pasted and slightly modified in some places outside of
depot) into a generic //nix/buildkite library.
This should cause no change in functionality.
Change-Id: Iad3201713945de41279b39e4f1b847f697c179f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4726
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These records were previously configured manually in the GleSYS web UI
during our DNS outage (b/155).
Note that I could not find a way to `terraform import` these records
and have instead recreated the set and then cleaned up in the UI.
Change-Id: If7de9a7e6dad20953ba8b610589a62dce400e87b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4716
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
These records were previously configured manually in the GleSYS web UI
during our DNS outage (b/155).
Note that I could not find a way to `terraform import` these records
and have instead recreated the set and then cleaned up in the UI.
Since we often point things at whitby, I have extracted variables for
its IPs in this change.
Change-Id: I09fda94d3734e8aaa278fa858e160d046740da1e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4714
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
These records were previously configured manually in the GleSYS web UI
during our DNS outage (b/155).
Note that I could not find a way to `terraform import` these records
and have instead recreated the set and then cleaned up in the UI.
Change-Id: I2b7e0ed0931f50e7fa49c1f6e3400dfe958def04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4713
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Adds the secrets and some instructions for deploying the GleSYS
Terraform infrastructure.
Change-Id: I1a10f9cee7648d406b3d27ef45fc74b6923cbc30
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4712
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This was previously configured in the UI.
Change-Id: I68361b1489093b76736adab2e38ed7b474b10881
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4711
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This was previously configured in the UI.
Change-Id: Ib15b8ecca96d7814dc85d62199865b22bdb63f95
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4710
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This should never sit around locally the way it does now.
Change-Id: Icfbdaf1949d6d948a796a0759282ea6144af3621
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4709
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This file can be sourced (somehow, depending on the user) while
working with //ops/keycloak to get the relevant secrets.
Change-Id: Ibb3051c4b019f64824964475451c1c3996db6421
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4708
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Grafana was still pointing at the (now non-existent) CAS setup. This
changes the endpoints to use Keycloak instead and updates the client
secret.
Change-Id: Ib25d38330aba2ef6d894e8c33d86852c884ab5be
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4706
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Generalize out a reusable mkSecrets function from the
secrets-tree-building that's happening in //ops/secrets, so the same
thing can happen in other places in the depot (I want to use it for my
personal infrastructure).
Change-Id: I059295c8c257d78ad7fa0802859f57c2c105f29b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4679
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: zseri <zseri.devel@ytrizja.de>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Building nix derivations needs tar (provided by gnutar) and gzip on the
PATH in order to extract .tar.gz archives.
Change-Id: Ia2df7a3a770cfd342dfede58ad34e04805fbd1f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4685
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
This will be useful for things like panettone, pending a NixOS module
for oauth2-proxy (the upstream one is too complicated and doesn't
support what we need).
Change-Id: I4ca193e10a94a29b1fb9003e945896ff8eb61116
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4662
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: tazjin <mail@tazj.in>
Verified emails are required for some things, like e.g. oauth2_proxy
Change-Id: Ifb124be40d6d2863cd1b7ed5fbdfcf4827e8808c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4661
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: Profpatsch <mail@profpatsch.de>
This is still missing most of the client configuration etc., in part
due to bugs in the provider which are preventing resource imports.
Change-Id: Ic224ffc001f8e1fe6dcd47b7d002580fdf7b0774
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4628
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Note that the login.tvl.fyi WWW configuration is still kind of hanging
around until we've settled where Keycloak lives.
Change-Id: Iaca4e394a7371cafa3716ca66ef09c4eca5b1520
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4626
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Gerrit has OAuth2 and email related secrets which now live in agenix
instead of a random file on disk.
Change-Id: I6220fbb7a2e2ec0102a900b4bcf6150b8b4d32ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4612
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Trialing this as an alternative to CAS that is a little easier to
configure and can help us delegate authentication to other OIDC
services.
Change-Id: Iad63724d349334910af8fed0b148e4ba428f796b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4608
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
This provides the right Terraform provider with a wrapper in $PATH.
Change-Id: Idcb4fa89dff0161e8a73addfce81959e825c331e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4562
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Unclear if this reformat is caused by the channel update or if this file
was ignored previously.
Change-Id: I3498ab181c7fff1b132419783e33a96f7bebfe42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4520
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
If available, provide a link back to Gerrit on the overview page of a
build.
Uses the default style (i.e. style unset), which makes it
non-intrusive visually.
Change-Id: I4271d589d548015b75762fd0584f3958bfcc53e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4442
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
The code in //users/wpcarro/tools/monzo_ynab/ynab/client.go was not
valid Go and has been commented out.
Change-Id: Icb4003607f30294dcbf60132eb7722702c7f0d84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4400
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: Profpatsch <mail@profpatsch.de>
got into some kind of race with different patchsets of this CL
somehow, idk
Change-Id: I3dcdb708f141829b866fbd786483710b43ea9824
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4481
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
If we set this for canon, then stuff starts to fail in non-obvious ways.
Change-Id: I3bf38e29151c6066aaf4eba68ae387272d8a82c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4463
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
apparently this chomps away at things inside of fragment strings
Change-Id: Ie60d52d101dc4281b3a62c228af076791e1c7928
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4462
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This makes it possible to annotate builds with a link back to Gerrit.
Change-Id: If351785d3b631b96753d41f417ca94bc7a95ac54
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4441
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
The branch key for buildkite builds isn't actually used to fetch if a
commit is given - instead, it's just a visual grouping of multiple
builds. This means we can just make the branch key cl/<cl number>, which
is the convention we already use to refer to CLs and gets us a nice
visual grouping of builds of successive patchsets of the same CL number,
even though the ref we're providing isn't a real ref.
Change-Id: Iaa9111297a88f965fda94cd8266240106f58a100
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4347
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: grfn <grfn@gws.fyi>
I'd like to be able to run extra CI steps that include running docker
containers (to integration test things like webapps that connect to a
database). To do this the buildkite agents themselves need permission to
do docker things.
Change-Id: I3c9a488708f0e12a508754ac41f04148ca7aedac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4408
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
diogenes "passed" CI because the file was named configuration.nix
(vestage from the NixOS default /etc/nixos/configuration). This CL fixes
some issues I encountered after running depot/bin/rebuild-system.
TL;DR:
- rename configuration.nix -> default.nix to trigger CI
- add diogenes to my systems
- add public SSH key
Change-Id: I24197b8936c201267db6f71f00099dce590eac1d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4388
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: wpcarro <wpcarro@gmail.com>
Submitted via IRC, instead of the usual Google Groups
due to email issues.
Change-Id: I71a2bdfd10b02370df61bbba4dabc2f45b6c1009
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4384
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
For modules that are gated behind a mkEnableOption, it's reasonable to
just provide them to all Depot-built nixos systems without requiring
people to explicitly import them. This defines a special module called
`default-imports.nix` which imports these modules (currently just
tvl-cache.nix and automatic-gc.nix, as I'm being rather conservative
adding things here to avoid breaking anyone's system), then provides
that module as one of the `modules` passed at the top-level
nixos/eval-config invocation.
Change-Id: I3be299ab10ae4c451ef11c514edb3c89318a2278
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4345
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
Add a shared nixos module for configuring whitby as a binary nix cache,
and refactor tverskoy to use this module.
This is enabled via an option to pave the way for including it as an
import in all depot-generated nixos configs at some point in the future.
Change-Id: I6dcc0e8eb48b1ac34457666dceebeedd5da6c526
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4344
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: grfn <grfn@gws.fyi>
Don't notify reviewers ever on CI status changes, and only notify the
owner if the build fails.
Change-Id: If2cf63581b49e3de77181024ce8a4213031f4bd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4337
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: grfn <grfn@gws.fyi>
This fix was recommended by Buildkite and is explained in the comment.
Change-Id: I3f1c1c07cba0b417857d69c021c8af4750d645c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4334
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The number of jobs in the depot pipeline is reaching the limits of the
Buildkite backend's ability for a single pipeline upload. Based on a
conversation with their support my understanding is that this has to
do with internal locking mechanisms at Buildkite.
To work around this, we can instead chunk the pipeline into several
smaller chunks that are uploaded serially.
This commit introduces logic to chunk the pipeline accordingly. The
chunk size chosen is 256 for now (a multiple of our number of agents,
which is useful if we can get builds from the first chunk to start
before the next ones are uploaded).
Note that this chunk size is significantly below even the current
number of targets (~460 as of this commit), but choosing a lower chunk
size might alleviate problems we've been seeing with timeouts during
pipeline uploads.
Change-Id: I77030aaf8b874c330218b78c77d15216e13b9af7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4332
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: tazjin <mail@tazj.in>
https://cl.tvl.fyi/c/depot/+/4264 did move merging config with secrets
into ExecStart=, which is tracked in an RFE upstream:
https://github.com/systemd/systemd/issues/19604#issuecomment-989279884
We didn't link to this so far, neither in the commit message, nor in a
comment.
Let's add a comment, so people know when we can undo this.
Change-Id: I7bed370b671093bb876592b4dccd562f1c256cd2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4326
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
We can gcroot the derivation files and drop this step, but have
elected not to do so for the moment, see cl/3436.
Change-Id: I993a1f3921e9f21e18fa260e76d3dd15ffa556bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4327
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
By default besadii will set the `Verified` label in Gerrit. This adds
a config option to set a different label instead if desired.
Co-authored-by: Vincent Ambo <mail@tazj.in>
Change-Id: I254159e46994e01182987ed5e5e26e27c57f46ce
Currently in NixOS configuration using agenix secrets there is no
build time validation of secret paths - things fail at runtime (system
activation).
To prevent that, this CL makes the secrets part of the tree based on
the same configuration file used by agenix itself.
This guards against:
* agenix secrets.nix definition for a non-existent file
* age.secrets value in a NixOS config for a non-existent secret
Change-Id: I5b191dcbd5b2522566ff7c38f8a988bbf7679364
... okay, this is like the 5th error related to something with this
and file paths. Need to write some validation logic.
Change-Id: I4314818aa1bc25b8cf7bd3593850d3836ccb867c
Git only allows binary names prefixed with `git-credential-` if the
path to the helper is not absolute.
Why? Who knows.
Change-Id: I216b2a621f62a73f05e21def7ec8016b29ede892
Currently this functionality is provided by a shell script stored in
/etc/secrets (which has the password value hardcoded).
This needs to happen in a separate commit from the one that changes
the pipeline to avoid breaking it (it needs to be deployed first).
Change-Id: I680754c828ccefbacfcf0d5c813a4bc19493ba4c
We already checked this in, but this commit adds the configuration for
making use of it.
There are two copies of besadii's JSON configuration with different
permissions.
Note that the buildkite-graphql-token path needs to be updated in
static-pipeline.yml, but this needs to happen in a separate commit
after deploy because the pipeline will break otherwise.
Change-Id: I6fab4bf1a2e679df7cf76521e2b53bd9dadbac62
... this option really is a pitfall! The list of programs is now the
same as in the upstream module, plus curl and jq.
Change-Id: I29edae4b2400a2724f62df9efa1dc184a8b0af5f
The DynamicUser + Group configuration does not work as planned, thus
the systemd LoadCredentials feature is used instead which makes the
file (which itself is only readable by root) available in a
memory-backed location only readable by the service.
The secret is only available to `ExecStart` commands, so units using
this feature can not be used with pre/post units and the like if those
commands need secrets.
To accommodate this, the merge of configuration files has been moved
into the service launch script, which is now the ExecStart= process.
For details take a look at https://www.freedesktop.org/software/systemd/man/systemd.exec.html#LoadCredential=ID:PATH
Change-Id: I693fe5677cc0d63c7aa485c2c7472457c5262166
It turns out the lib.mkAfter call doesn't behave as expected -
only *some* of the packages that are defaulted end up in the $PATH.
I suspect this is actually something else, e.g. these packages are
always added for some reason or another, and the option is completely
overridden every time.
Change-Id: I854c7198520d82b00e6338ed0fe653836226dc6d
Turns out that the type of this option is not concatenative and it
replaces the packages needed to run Buildkite if set.
Change-Id: I9f52572bc165bccdd8c6518cfdf7b8967f7a50d0
The irccat module uses DynamicUser, so to grant permission to it a new
group has been added for irccat.
I have some vague memory of DynamicUser + Group not behaving as one
would expect, but we'll see what happens.
Change-Id: Iab9f6a3f1a53c4133b635458ce173250cc9a3fac
This step would get inserted at the wrong point in the build pipeline
otherwise, causing a dependency cycle and causing the pipeline to fail.
Change-Id: I534568eec77f74ae6c47276820f8a9e99493a3ea
This simplifies the fallback logic used in case of Nix evaluation
failure and makes it so that the evaluation step itself is the one
that is marked as failed in Buildkite.
This is possible because the pipeline upload command will insert new
steps at the point where it runs in the pipeline, and not later.
Change-Id: I870534c004ebc457a1602623c4e5f9c0c68e28fc
Adds a systemd EnvironmentFile secret that contains the Gerrit
username & password for gerrit-queue.
Change-Id: I25acf87764c26774045138402b8a417b6813ee8f
This is not yet including the secret configuration for gerrit-queue,
and just expects the secret (gerrit username & password) to be
available in /etc/secrets.
Change-Id: Ia465ef7f3f521c70d606d7fdeba9aa83c7e1b98b
This is required for a simplification of the build pipeline (following
CL) and needs to be in a separate commit as it can not be done
atomically (merging the other commit to deploy it would immediately
break pipelines otherwise).
Change-Id: I5d8ec8f3238f79b5518d799486bf98d1d9516c43
Sets up the key set and adds an initial secret (besadii config with
tokens) to be deployed to whitby.
Change-Id: Ic07fd5e66b9e7a533013e04c35e052c2aa11f77d
Gerrit wraps RFC5322 emails in another layer of quotes when passing
them as flags, and this needs to be unquoted.
Otherwise hook invocations fail with cryptic errors.
Change-Id: Ieeb74c662873d99a4154f8cbc92da77b039cb88e
Ensure that besadii sees $0 as the correct command name, since that is
the sole mechanism by which its functionality is switched around.
There was a lingering commit that introduced this bug and hadn't been
deployed in a couple of days. Maybe time to tighten deploy cycles soon
...
Change-Id: Ie4284c0f6e5e06d71a71a3702ec7e092260e0ce5
Extracts author information from the flags passed by Gerrit and moves
them along to Buildkite. This should display the owners of builds
correctly in the UI, rather than marking everything as coming from me.
Change-Id: If9efe5553a13f0dbdb8bf3936c1d341ae5922318
This makes it possible to use besadii for any TVL-ish setup using
Gerrit and Buildkite, with the same hook functionality as for TVL.
Change-Id: I1144b68d7ec01c4c8e34f7bee4da590f2ff8c53c
Adds configuration keys and rudimentary validation for all other
besadii settings that are currently hardcoded.
This adds the config options:
* repository: Name of the repository in Gerrit.
* branch: Name of the HEAD branch in the repository.
* gerritUrl: Base URL of the Gerrit instance
* gerritUser: Username of the Gerrit user
* gerritPassword: Password of the Gerrit user
* buildkiteOrg: Name of the Buildkite organisation
* buildkiteProject: Name of the pipeline inside the Buildkite
organisation
* buildkiteToken: Auth token for Buildkite access
All of these configuration options are required.
Change-Id: Ie6b109de9cd8484a3773c6351d7fd140f39a49ed
On whitby, the besadii config will live in
/etc/secrets/besadii.json. This CL updates the call sites to pass this
config path to besadii so that it can load Sourcegraph configuration.
Change-Id: Ia139b9fa3b827e7a5f2386214390acc6fe19a75a
Initial step towards moving besadii away from hardcoded values and
onto config files. This is required because I want to reuse besadii
outside of the TVL context.
Change-Id: Id4fa7a49c5d4f876a02b202f04a421ab5ba0dcc4
Change the Nixery configuration to use the plain nixpkgs package path
instead of the depot path. AFAIK, nobody uses this to fetches depot
packages at the moment - but plenty of people fetch non-depot
packages.
This means that Nixery is cache-busted less often (previously on every
commit => every deploy).
We'll figure out another way to have a depot Nixery later.
Change-Id: Iba632333346181c3d2ce992fbab396ed0d9f86aa
Removes besadii support for the previously used 'ref-updated' hook and
instead introduces support for the 'change-merged' and
'patchset-created' hooks.
These hooks more accurately capture the semantics of when besadii
should trigger CI builds and using them will avoid problems such as
skipping 'canon' builds if chains of CLs are submitted together.
Change-Id: Ib90356c069780bf0c0250e56b927e46a5b31ce7f
Instead of manually tracking the build status through Buildkite
metadata, use the Buildkite GraphQL API in the `🦆` build
step (i.e. the one that determines the status of the entire pipeline
to be reported back to Gerrit) to fetch the number of failed jobs.
This way we have less manual state accounting in the pipeline.
The downside is that the GraphQL query embedded here is a little hard
to read.
Notes:
* This needs an access token for Buildkite. We already have one for
besadii which is also run by the agents, so I've given it GraphQL
permissions and reused it.
* I almost introduced a very rare bug here: My initial intuition was
to simply `exit $FAILED_JOBS` - in the extremely rare case where
`$FAILED_JOBS % 256 = 0` this would mean we would ... fail to fail
the build :)
Change-Id: I61976b11b591d722494d3010a362b544efe2cb25
We are changing the Gerrit hooks which invoke besadii, but this
structure will be used for both kinds.
Change-Id: Idb1cb0c640d2c42db8e7af39f3ab372a97bfef91
This is causing failures when trying to update Sourcegraph at least,
for good measure I've trimmed both.
Change-Id: I40266ee83b4e266ffe50f16bb365eb2e51952513
This function is also generally useful for readTree consumers that
have the concept of subtargets.
Change-Id: Ic7fc03380dec6953fb288763a28e50ab3624d233
Since GCP nuked us, the backups are now moving to GleSYS'
S3-compatible object storage.
This refactors the restic module to support S3-compatible storage
instead of GCP, and switches to the appropriate new secret paths.
The secrets were placed on whitby manually and I verified that the
backups work.
This fixes b/157
Change-Id: I6a9d2b0581967605ce736605a3befb44cdeae7e1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3883
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
It seems that shell variables don't work as expected inside the
Buildkite pipeline, so usage of variables has been removed.
We also don't echo the revision anymore because of that, but it does
still appear in the log of `git push`.
Change-Id: I124e3b09af896da898f2a78715ed371651a1c5f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3780
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This makes the revision number available much earlier (before the rest
of the pipeline runs, while Nix eval is happening) which should only
be a few seconds after a commit to canon.
It is also more readable in this shape.
Change-Id: Iccbb17dfef6afe68f54fda41e8d10c4dc52b08c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3775
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This automatically pushes a new ref at refs/r/$revision to Gerrit
whenever a CI run completes on canon.
Revision numbers can be fetched from Gerrit with this command:
git fetch gerrit "refs/r/*:refs/r/*"
Note that this build step requires credentials to be provisioned on
the CI runner machine.
Change-Id: I37bb14346832f891240aa47bb55affaace3d5f21
The previous hash had a weird salt length and a trailing newline.
This fixes it.
Change-Id: I1f03238181d0caad38e1f1dbc477356bc20fc32d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3689
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
The setup is explained in the comment, but TL;DR: Use the derivation
hash of static files to create permanent URLs.
Relates to b/151.
Change-Id: Ib1ca3a1a00c90a47f4bf39c29a8b4bbf5b215e7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3664
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This hostname can be used for hosting static assets with aggressive
caching for everything, or potentially CDNing stuff if we ever have
large things here.
Change-Id: I10afdad5eb08125d8d09108e9e099f5573362fe5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3663
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As cschilling explained on cl/3563, there isn't actually anything in
this state that we *need* to persist. We're still keeping it in a
persistent directory on disk as this serves as an optimisation after
restarts of josh.
Change-Id: Ia88886792a5acac34508b5b8a669bd519ca033de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3631
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This lets each service declare their backup paths together with the
configuration for the service, which is a lot more sensible than what
we had before.
Fixes b/147
Change-Id: If76fe62639f4cc0e6fbb63a2959d584479d8f0fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3583
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
I can never remember which is which.
Change-Id: I69b8235862b8c5b49030a74bfca25aaa113273b7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3582
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This makes it easier to click through to a build from Gerrit after
submitting a CL.
Change-Id: Ic5c6eeb81c87bc4ea23c5c5ca25704434b081fd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3572
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Currently besadii only posts comments when builds succeed, but it
might be very useful to also have a link to a build when the build is
started.
This just shuffles code around. The only functional change is that the
`labels` field in the review input is marked as `omitempty`, as this
will not be needed when posting the build start comment.
Change-Id: Id4a43fad8817c9a15da02f01ab2b781d48b46978
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3571
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Relates to b/147.
First step towards giving depot modules the ability to declare their
own backup directories by moving all restic configuration into a new
module and adding a NixOS option for inclusion/exclusion paths for
backups.
This still keeps all backup paths within the whitby config.
Change-Id: Ia96833668f1a3d02da892261153d8b02156b8ac0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3565
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Previously we served the dumb git HTTP protocol from code.tvl.fyi via
cgit. This CL disables this feature and instead runs josh in the same
location (by redirecting appropriately), but while also enabling
partial cloning of all subtrees of the depot.
For example, after this CL the following would result in an
independent clone of //nix/readTree:
git clone https://code.tvl.fyi/depot.git:/nix/readTree.git
Note that there are no josh workspaces configured at all for now,
these references are only for static depot subpaths.
Please refer to the documentation for josh for more information on
available kinds of josh filters.
Josh state is kept in a systemd state directory in /var/lib/josh and
backed up to Restic. Backing this up is necessary, as josh uses
stateful information to do things like tracking merges and rewriting
history per subtree appropriately to avoid cloned repositories ending
up in peculiar states.
Change-Id: I156f0298c2aa42e3bdbf5a0e86109070d640c56e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3563
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This one seems a little more involved:
https://docs.sourcegraph.com/admin/migration/3_31
I believe we skip that corruption issue in the previous CL though, by
simply never deploying a version with that weird broken image.
See b/144
Change-Id: I3bbf1b719d00905e08a92011ace5485467f504ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3525
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
We changed away from the default sourcegraph one because it didn't
support Nix, but it seems that there's been a change in the
interaction protocol.
Change-Id: I3a2691df6a87672cf83b819143f25d93d9cd6d13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3531
Tested-by: BuildkiteCI
Reviewed-by: eta <tvl@eta.st>
Reviewed-by: sterni <sternenseemann@systemli.org>
Add the beginnings of an auto-deploy script for whitby, intended to
be (eventually) suitable for running automatically in a systemd timer.
The current iteration of the script doesn't actually do any deploying,
but instead takes as an argument a revision, creates a new git worktree
in /tmp with that revision checked out, runs a nix-diff of whitby's
system derivation in the running system and at that closure, puts an
html-rendered version of that diff in the public directory used by
deploy.tvl.fyi, and finally sends a message to IRC via irccat with a
link to that HTML page.
Refs: b/110
Change-Id: Id40525567f8845590c909568befd8d00c07a481c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3145
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: kn <klemens@posteo.de>
Add a new domain and nginx virtual host at deploys.tvl.fyi, serving out
of a static directory on whitby which is created by systemd-tmpfiles.
This will be used to serve diffs rendered by nix-diff for
pending deploys for whitby
Since this contains stateful data, it is added to the restic backups
on whitby.
Refs: b/110
Change-Id: I5869d40800bbf5fb8fb39878a857f66ff5787830
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3144
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
We changed the configured pipeline in Buildkite to upload
`static-pipeline.yaml` instead of containing the steps of that
pipeline itself.
This makes it easier to test changes to builds and such, but adds
another build step with scheduling overhead etc.
However - we can work around this by killing one of the existing build
steps. There's no reason the failure status zeroing (required for
status reporting) shouldn't be part of the pipeline setup, so I've
moved it there instead and nuked that step.
This should mean that the pipeline is configurable from within the
repo, but without slowing anything down.
Change-Id: I206ecc02647de42a461e33c02879ab84daf5ed2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3461
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Skip build steps if they have already been built, reducing pipelines
to the things that actually changed between builds. On canon all
targets are always built (we require this for anchoring).
Note that this is not perfect, garbage collection and competing
pipelines may affect each other.
Also note that we have some impure targets that change on every
commit.
Change-Id: Ic6bae3b6c8e1e7fd2116ec252f5089f471854ab6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3427
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
We currently evaluate every target twice -- once when the depot pipeline
is built and once when actually running the build step in question. Nix
evaluation is quite slow especially given heavy use of import from
derivation in depot, so avoiding the second evaluation is desireable.
Evaluating a derivation yields a `drv` file in the nix store which can
be passed to `nix-store --realise` in order to build it eliminating the
need to wait for evaluation. We can obtain the path to the `drv` file
while building the pipeline via `target.drvPath` and remember it for the
build later.
However we need to work around a flaw (or oversight) in Nix's dependency
tracking via string context: This is based on derivations, not output
path (because this is what evaluation deals with, likely). This is no
problem per se, but an issue is that Nix can't express a dependency on
a `drv` file without any of its output paths. This means for us that we
either have to build all output paths at evaluation time (which we don't
want, obviously) or to deal with the fact that the `drv` file we need
may be garbage collected at any moment after discarding the string
context -- then nix is unable to track the reference from the pipeline
to the `drv` file in the store.
So to prevent a race condition between the pipeline and the garbage
collector we fall back to the normal nix-build invocation as we did
before.
Change-Id: I9ef8bd233085dc6e30eba54f403ea03ac2d35748
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3426
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This is because I'm bored of CAS gradually consuming all the RAM on Whitby.
Change-Id: Idcc14c19d99a6d3553739c5765be3faf2bdf9d84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3233
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
This is a bit of an under-documented feature, but if the "tag" field for
a gerrit review starts with the string
"autogenerated:<something>~<something-else>", only the last comment per
instance of <something> will be shown by default on the CL page (with
the rest viewable by toggling the "Show all entries" switch). The idea
behind the "<something-else>" tag is to be used for the "type" of
comment within a particular system - gerrit's documentation gives the
example of one tag for "the build is running" and another for "the build
has finished, here's the result".
Change-Id: I9199a6ed97beca1b3a51ec5d6230c6c8358ba2b3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3374
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The dropping of `www.` is intentional, that was unused.
Change-Id: I300f82bb6e5626e2658be8fc5b5e3cf872ab7099
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3384
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Adds a new module for the nixery.dev domain and serves it from whitby.
Note that the DNS records do *not* point to whitby yet, so deploying
this will lead to a failed TLS provisioning unit - but this is
intentional.
Change-Id: I911f67a0aa24f8df3cb52d2cfc49a8b6132cf718
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3383
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We'll need to do a DNS switchover, likely with a short amount of
downtime due to TLS provisioning.
It would be possible to avoid this by provisioning a cert manually
pre-hoc through the DNS challenge and then configuring whitby to use
that, however I simply don't have time for that right now and the
Google Cloud Project for Nixery is going away in O(days) for $reasons.
Change-Id: I88dface5aaacec5acfa525ae117462f8ad296d92
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3382
Tested-by: BuildkiteCI
Reviewed-by: kn <klemens@posteo.de>
This is required when people change their email addresses (e.g.
cl/3349) as nothing in Gerrit will update that information from the
OAuth provider.
Change-Id: I1eafdf22efd37898dcd0d06bb9a5d1471ffb5e31
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3356
Tested-by: BuildkiteCI
Reviewed-by: eta <eta@theta.eu.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
I got a new domain, etc.
Change-Id: Ic8ffc01f4e5e89dc2458d80a9c38757438cfa764
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3349
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This record is intended to serve Nixery.
Change-Id: I575dedac18c98f9f4bd5e459babe79e850361651
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3343
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This sets up a very simple Nixery instance with some things lacking:
* no support for garbage-collecting image fragments (yet)
* no popularity setup
The plan is to use this to get the ball rolling on a separate
domain (e.g. images.tvl.fyi), iron things out and then look into
flipping over nixery.dev
Change-Id: Ic594809f9d487fec7a0f632d608752a3f9c61315
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3280
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Break out the configuration for the prometheus fail2ban exporter, which
is a simple python script that exports stats from fail2ban as a
prometheus-scrapable textfile, from Mugwump into a reusable nixos module
in //ops/nixos/modules.
Change-Id: I5451c9c5de6c7bc4431150ae596a9c758bf1b693
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3136
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This fix is essentially the same as the one in cl/1263.
Change-Id: I27be280a610914fcfbb6d7fee7aebaa56b993812
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3158
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
* users/grfn/system/home/yeren: remove obsolete awscli2 overrides
* ops: make new isSystemUser || isNormalUser assertion happy
* users/grfn/system/system/mugwump: make buildkite agents system users
* users/tazjin/nixos/camden: set isSystemUser = true for git
* users/tazjin/emacs: Remove missing & broken packages
* third_party/openldap: remove, as the argon2 module is now enabled upstream
* third_party/gerrit_plugins: Pinned new unstable hashes
* third_party/nix, third_party/grpc: Disabled CI as these are broken
* third_party/overlays/emacs: Bumped version to stay in sync with channel
* third_party/buzz: Update LIBCLANG_PATH to reference libclang.lib,
since libclang's default output no longer contains libclang.so
* users/grfn/system/home: Install julia-stable instead of julia (which
aliases to julia-lts), as the latter depends on an insecure version of
libgit
Change-Id: Iff33b0ecb0ef07a82d1de35e23c40d2f4bf0f8ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3001
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Until we have declarative ZNC config (which requires a solution for
secrets handling in it), make sure we back this up as well.
Change-Id: Idb186327da171eb6d3dbbd83801639f1f9321a40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3159
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Use the new module settings which apply configuration in cn=config
instead of slapd.conf.
The module performed this update via lib.mkChangedModuleOption, I've
applied the transformations contained therein manually. Note that some
of the settings were already in place, which means that the `suffix`
and `database` options seemingly disappear into the void.
Fixes b/105.
Change-Id: I8a968c1eb8cb7827618cb732cdb46006a5d011f9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3157
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This changes the evaluation order for the `depot` argument and ensures
it is partially evaluated before the module system starts resolving
imports.
This way we can import modules from `depot.path` without `depot`
having to come from readTree.
Fixes b/129.
Change-Id: Icf4dd2be15011055dac8b27e991a4ff6a12bf827
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3156
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This time using `tools.hash-password` because login did not work with the
initially created hash.
Change-Id: I1eb62a496d2d8497d27573af47bf8bf70dac9bbb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3153
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This will be used to serve (nix-) diffs for pending deploys of whitby
Change-Id: Ia864993b1fcb3b7ce5fcc21f32a27528a4c31f08
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3149
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
irccat is passing the realname option as the ident of the user, which
doesn't match what is in ZNC.
It hasn't seen any upstream commits in a long time, so I'm just
leaving this as is and fixing it locally in our config.
Change-Id: I3bf865f37b8df9c1cd891a94245ca3fad376bbe1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3150
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
I like running fail2ban on any machine that has stuff like ssh
world-open, to limit the potential for password brute-force attacks etc.
Change-Id: I0c60811ae5a2fddb44f04679fb455e646b8e39c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3138
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This doesn't replace all of them in the repo, but at least the ones
that are relevant to our move.
Change-Id: I842e7594b4c16af30d880272417874f6b29afd22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3134
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: grfn <grfn@gws.fyi>
This configures owothia to use her new bouncer to HackInt.
Change-Id: I80eb8191c2b0f2a6f8a31d19b60250ade27c1913
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3129
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Points clbot at the new local ZNC instead. This will make it part of
the things happening through the `tvlbot` account.
Relates to b/101
Change-Id: I1c15ffa5720d3af34475c15bee3fdaa537ac659b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3127
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
This adds a shadowsocks service, running on port 8443, tcp and udp.
The password is read from /etc/secrets/shadowsocks-secret.sec, and needs
to be populated externally.
Change-Id: I6797150db108ba14459502dee43d8e4ed6cfa910
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3125
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The following commit itends to bind on port 8443 on all interfaces,
so let's move this to something else.
Change-Id: Ibb94a0f4e6892b6e543b542b89bcdaaefb617f23
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3126
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Bouncer to be used for TVL's IRC bots, see b/101
Change-Id: Ic9f71ecd94365d3baa31e0552b1ce16362f94557
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3124
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Sourcegraph logs warnings about this on startup otherwise. Unclear
to what degree it really affects operation though.
Change-Id: I6ee7c5358631aafd9a7f8155150361bf7499314d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3098
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The shorter one is going to be more convenient when we get
go-link (or, well, at-link) support.
Change-Id: Ic24adcdad679b893c40c87731add818660259dac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3091
Tested-by: BuildkiteCI
Reviewed-by: isomer <isomer@tvl.fyi>
.. this is actually likely not disabling it for some pages, that will
need this to be copy & pasted, but it's hard to tell just from the
nginx docs. We'll make sure after deploying.
Change-Id: I2fa6e31ca10835a206673b858594fa071e729d82
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3020
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
This is currently done ad-hoc in a bunch of our systems, but we should
just do it centrally.
The commit message is a bit of a lie, as this doesn't yet update
grfn's systems.
Change-Id: Ic771c1a1da78ec5de9cffbf94c296dce5e11fd84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3047
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
It needs to refer to this by full path of course.
Change-Id: I911c876ba18877681accb722426314d92b9f2318
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3042
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This will require the daemon to be running when launching GC, but
won't start it if it happens to not be running for some reason.
Change-Id: If48fe336030173f028428fc00a81d339ef4b8bce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3015
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Adds a module that automatically collects garbage based on disk space
thresholds, and configures it to run hourly on whitby.
This is implemented as an alternative to cl/2937, which I've been told
uses a Nix feature that doesn't actually work.
Under-the-hood this is simply a systemd timer running a shell script
which checks available disk space and runs GC when necessary.
Change-Id: I3c6b5de85b74ea52e7e16c53f2f900e0911c9805
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3014
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
There's a hard-coded list of Admin usernames for the moment. We should
revisit this and get an actual groups setup in LDAP that's propagated
through...
Change-Id: Ic3601f1a9753573076769f4912038e9f1b60e139
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2982
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Enables a Grafana service pointing to whitby's local Prometheus
instance, accessible at status.tvl.su.
I've no idea how to configure Grafana and if it's possible to link it
to CAS, but we'll see about that later.
Notes:
* the explicit fixpoint for whitby config has been removed as we
have the `config` parameter available now
* backups are enabled for the Grafana storage location
Change-Id: If5ffe0c1a3378d1c88529129487c643642705fd2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2948
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Instead of having two ways of accessing the path to the depot (one of
which was stuttering, depot.depotPath) we settle on only one:
depot.path.
This was mostly used for NixOS module imports.
Co-Authored-By: Florian Klink <flokli@flokli.de>
Change-Id: I2c0db23383fc34f6ca76baaad4cc4af2d9dfae15
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2962
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Dropping the message field will make Buildkite use the commit messages
instead, which makes for much more readable build logs.
Change-Id: I1849f811632526893b700f117c9f6cf64888c329
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2949
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Enables Prometheus with a local node exporter, and nothing else for
now.
Some additional collectors have been enabled for things that might be
relevant on whitby:
* systemd: all our services run in systemd
* processes: might be interesting for build-related stats
* logind: might be interesting for interactive usage stats
Change-Id: I48dacdd9c68b4be9edff7b3cb6256dad562498c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2930
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
--show-trace should make it easier to debug tricky evaluation errors
without running nix-build -A ops.pipelines.depot locally again.
Change-Id: Ice540562c3b389fc2a49ec1fc0adacb17db2a528
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2947
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Rename my //users directory and all places that refer to glittershark to
grfn, including nix references and documentation.
This may require some extra attention inside of gerrit's database after
it lands to allow me to actually push things.
Change-Id: I4728b7ec2c60024392c1c1fa6e0d4a59b3e266fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2933
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: glittershark <grfn@gws.fyi>
Splits //ops/nixos into:
* //ops/nixos.nix - utility functions for building systems
* //ops/machines - shared machine definitions (read by readTree)
* //ops/modules - shared NixOS modules (skipped by readTree)
This simplifies working with the configuration fixpoint in whitby, and
is overall a bit more in line with how NixOS systems in user folders
currently work.
Change-Id: I1322ec5cc76c0207c099c05d44828a3df0b3ffc1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2931
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: glittershark <grfn@gws.fyi>
This change is required to run the ⚓ step on canon builds.
Change-Id: Ib3cebac67c9f5337b27a948f120b0a9ba834ef2a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2932
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: glittershark <grfn@gws.fyi>
Adds a conditional build step that only runs on the canon branch, and
only if 🦆 (the status reporting step) succeeds, which creates a
new Nix GC root for all depot targets named `depot-canon`.
In practice this might be a bit racey, as canon builds are not
guaranteed to succeed in order (though it is likely). This shouldn't
matter much in practice: We only want to prevent rebuilds of the whole
world.
This fixes b/102
Change-Id: Id3d0bf4158bffcb1ed6929888a29d31609b6ece1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2904
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
This ensures files created by the Buildkite agents are always owned by
the same group, without having to manually chgrp afterwards.
Change-Id: Idbaedec43c16b2ee137d1a95719a05d46db8f900
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2929
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Please read b/108 to make sense of this.
This gets rid of the explicit list of exposed packages from nixpkgs,
and instead makes the entire package set available at
`third_party.nixpkgs`.
To accommodate this, a LOT of things have to be very slightly shuffled
around. Some of this was done in already submitted CLs, but this
change is unfortunately still quite noisy.
Pay extra attention to:
* overlay-like functionality that was partially moved to actual
overlays (partially as in, the minimum required to get a green
build)
* modified uses of the package set path, esp. in NixOS systems
Special notes:
* xanthous has been disabled in CI because of issues with the Haskell
overlay
* //third_party/nix has been disabled because of other unclear
dependency issues
Both of these will be tackled in a followup CL.
Change-Id: I2f9c60a4d275fdb5209264be0addfd7e06c53118
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2910
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This configures accepting requests for b/ and cl/ on plain HTTP ports,
and redirecting to b.tvl.fyi & cl.tvl.fyi appropriately.
Additionally, Panettone request URIs that only contain decimals are
redirected to `/issues/$request_uri` to enable issue short-links.
This fixes b/32.
Change-Id: I56954d8d69a3624267778b467520c509f4daa6c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2908
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
This commit cleans up a huge chunk of these uses in //ops
Change-Id: I00faeb969eaa70760a26256274925b07998c2351
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2915
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This lets us grant permissions to them, e.g. on local folders.
Change-Id: I823ac414be1cb7d6baa4f17d95003709e5911b04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2905
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There will be more Buildkite-agent specific configuration, and it's
already more than just the module setup, so extracting this makes
sense.
Change-Id: I56ce205c0cb4365317ed7ed5f2d525a0b425b861
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2906
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
This small(*) pile of JavaScript queries the Buildkite API for the
latest builds for the depot and displays the results in the rebooted
Check UI.
Change-Id: I7025a1c6d0d0afa000a9df4682133e03824ea10d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2881
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This is just going to be a grab bag of things which do TVL-specific
things to Gerrit, whether that be exposing new Prolog predicates or, as
I intend to do as the first thing, expose Buildkite builds as checks.
Change-Id: Iaeab987a1fdbd078b85e274691c986489903bf3a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2872
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Having a slow cache is better than having no cache.
Change-Id: Ie3cfcd4a2937d90b0e2ad899816bc31ae806631f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2847
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
This drops the old LDAP configuration and uses CAS instead. All hail the
hypnotoad.
Change-Id: I515a213f09073bb52bfb75afe2988b935a076087
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2783
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Until I come up with a better idea.
Change-Id: Ie44cae4c2df264cbe1a70f5ebcca814262dd2800
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2771
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
All user configs and modules have been migrated to using the depot
module parameter. All hail the hypnotoad.
Change-Id: Ic05c61fccba3ac505a339283b6ef3105a2d0711c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2765
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Previously the depot argument was provided as config.depot, but the "new
way" of doing things (which is more like the args list provided in the
rest of the depot) is to provide this as the "depot" NixOS module
argument instead.
Change-Id: Ib48b1c7c1bdff9c1eb0618c6cbacc22b651f5f98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2763
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
For the moment I've opted to not import all of the other things we'd
usually provide to things imports via readTree, because I think it's a
bit dangerous to accidentally overwrite things like NixOS' notion of
"lib" with our own version.
So for the moment, baseModule provides only "depot".
Change-Id: I3db9132a3d9227055d4c1b00f02effcb84edcc53
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2760
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This is not for the domain root though, as that's going to be
something else eventually.
The canonical URLs are the .fyi ones (at least for now), and some of
these tools will eventually generate links that make user sessions
started from *.tvl.su converge on *.tvl.fyi.
Relates to b/98
Change-Id: I1c3bcf72a3063059002e4b0bdd57c269a410a8bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2758
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
I am somewhat trustworthy… maybe? Also I tend to gc depot stuff so ssh
serve would be neat.
Change-Id: I4672f20a32a756692dd156b5e40e5a7f37ba5ad0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2660
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
This is a quick hack to make it possible to view the rendered SVG on
https://code.tvl.fyi/about/tvix/docs/components.md
We want to be able to do this sort of thing dynamically in the future,
but we can't yet, so ... well. Deal with it.
Change-Id: Id2b819679d748b6f517018a9c6e72d5c1d806c4c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2743
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This reverts commit 3b05be2fd0.
Reason for revert: Sourcegraph still does not support fetching arbitrary refs, so we'll have to wait until its Gerrit integration lands before this will work correctly.
Change-Id: Icee82c50f92c34ba1741b608449aed16538ccbaa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2721
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Some quick testing shows that this improves my data transfer speed to
whitby by roughly 200%.
Change-Id: Id94de975b1ae0930f8d0fe038582dbac0037676c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2659
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: ben <tvl@benjojo.co.uk>
I'm looking at removing some of these because they can cause
unnecessary build steps during CI pipeline generation.
Change-Id: I84742968918090c050d2eedab8a1b42692632a42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2655
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reading through the changelogs, this includes the following two
changes that may require us to do something:
* For users of single-image Sourcegraph instance, please delete the
secret key file /var/lib/sourcegraph/token inside the container before
attempting to upgrade to 3.21.x.
* A campaigns.restrictToAdmins site configuration option has been
added to prevent non site-admin users from using campaigns.
Change-Id: Ieacf85a9059ad5222800f8d7d4a43435f489a39f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2638
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
I want to host something like Vigil[0] on this to show the status of
Gerrit, SourceGraph and maybe other components.
(Yes, the status page will be on the same infrastructure ... but this
is mostly for service failure cases).
[0]: https://github.com/valeriansaliou/vigil
Change-Id: If71496300b94035976a685d9bf166d525d89fc5e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2637
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
This was a leftover from the time we were installing.
Change-Id: Id875b907d7f76081a45e7f8f2666b7fba6aefc86
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2632
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
This is my new X13 AMD Thinkpad, on which many fun things will be done.
Change-Id: I4de114a8c5ebb37d2f4844f407d2dc0e7cc9557e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2620
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Since we have a dedicated util for this, we may as well use it
to reduce code duplication.
Change-Id: Ie52647be8c786d0b6a4dceb2fa6778b94625fafc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2604
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Imports the current state of the tvl.fyi zone and configures simple CI
checks on the file format.
No deployment automation exists for this (yet?).
Change-Id: Ia7d72e02b9f6d3adef994c5dc1898cc0df9dfcfb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2600
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
The ciBuilds attribute seems to no longer exist and it breaks the
evaluation of the config attribute. It's only appearance was in
besadii which doesn't actually use the attribute.
Removing the ciBuilds inherit fixes these issues.
Change-Id: Ibbf3413ba6efe10ad868cf57cf0711d574860f97
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2487
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Nobody has actually done any experimentation with typed Go, so we're
getting rid of it for now - it's causing annoying IFD during build
graph generation.
Change-Id: Ibac3dea98ebed1b3ee08acda184d24c500cf695d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2458
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: Profpatsch <mail@profpatsch.de>
This commit removes my user directory in the depot, my user account on whitby,
my entry in the LDAP database, and my entry in the website graph. I've had my
fun with TVL, but I want to move on to spending time on some other things.
This additionally removes aranea from the website graph, which they have
requested in private.
Change-Id: I2d098c8fe239f20d9f6c6cbf66a3dfb4a955a4cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2436
Tested-by: BuildkiteCI
Reviewed-by: multi <depot@in-addr.xyz>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Since the slapd data is static and generated using nix, we can simply
move the user list into ops/users, so it's recognized by readTree and we
can use it as ops.users both in ops/nixos/tvl-slapd and web/todolist as
a general purpose user registry for depot.
Update docs/REVIEWS.md as well.
Change-Id: I35caaaab70a5578c47cedc7f33077dd513766290
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2419
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
