It is helpful to be able to use the test suite as a regression test:
make a change to the compiler/vm, re-run the tests, and if there are
any failures you know it's your fault.
Right now we can't do that, because the expected-to-fail tests are
mixed in with the expected-to-pass tests. So we can't use them as a
regression test.
Change-Id: Ied606882b9835a7effd7e75bfcf3e5f827e0a2c8
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7036
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This commit deduplicates the Thunk-like functionality from Closure
and unifies it with Thunk.
Specifically, we now have one and only one way of breaking reference
cycles in the Value-graph: Thunk. No other variant contains a
RefCell. This should make it easier to reason about the behavior of
the VM. InnerClosure and UpvaluesCarrier are no longer necessary.
This refactoring allowed an improvement in code generation:
`Rc<RefCell<>>`s are now created only for closures which do not have
self-references or deferred upvalues, instead of for all closures.
OpClosure has been split into two separate opcodes:
- OpClosure creates non-recursive closures with no deferred
upvalues. The VM will not create an `Rc<RefCell<>>` when executing
this instruction.
- OpThunkClosure is used for closures with self-references or
deferred upvalues. The VM will create a Thunk when executing this
opcode, but the Thunk will start out already in the
`ThunkRepr::Evaluated` state, rather than in the
`ThunkRepr::Suspeneded` state.
To avoid confusion, OpThunk has been renamed OpThunkSuspended.
Thanks to @sterni for suggesting that all this could be done without
adding an additional variant to ThunkRepr. This does however mean
that there will be mutating accesses to `ThunkRepr::Evaluated`,
which was not previously the case. The field `is_finalised:bool`
has been added to `Closure` to ensure that these mutating accesses
are performed only on finalised Closures. Both the check and the
field are present only if `#[cfg(debug_assertions)]`.
Change-Id: I04131501029772f30e28da8281d864427685097f
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7019
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
In `a++b`, the previous implementation would move `b` (i.e. memcpy
its elements) twice. Let's do that only once.
We sure do call NixList.clone() a whole lot. At some point in the
future we probably want to do a SmolStr-type split for NixList into
a two-variant enum where one side is an Rc<Vec<Value>> for lists
longer than a certain length.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I32154d18785a1f663454a8b9d4afd3e78bffdf9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7040
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This commit adds a comment for the benefit of non-Lua-users
explaining what an upvalue is. It also adds a comment explaining
what `with_stack` does, including a brief reminder of nix's
slightly-unusual-but-well-justified handling of this construct.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If6d0e133292451af906e1c728e34010f99be8c7c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7007
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Without this change it was possible to cause situations (see the new
test) in which a `with`-namespace was forced prematurely.
Change-Id: I879ea7763b43edc693feace2c73c890d426fafd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7031
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Now that we're tracking formals on Lambda this ends up being quite easy;
we just pull them off of the Lambda for the argument closure and use
them to construct the result attribute set.
Change-Id: I811cb61ec34c6bef123a4043000b18c0e4ea0125
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7003
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Validate "closed formals" (formal parameters without an ellipsis) via a
new ValidateClosedFormals op, which checks the arguments (in an attr set
at the top of the stack) against the formal parameters on the Lambda in
the current frame, and returns a new UnexpectedArgument error (including
the span of the formals themselves!!) if any arguments aren't allowed
Change-Id: Idcc47a59167a83be1832a6229f137d84e426c56c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7002
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
In preparation for both implementing the `functionArgs` builtin and
adding support for validating closed formals, record information about
the formal arguments to a function *on the Lambda itself*. This may seem
a little odd for the purposes of just closed formal checking, but is
something we have to have anyway for builtins.functionArgs so I figured
I'd do it this way to kill both birds with one stone.
Change-Id: Ie3770a607bf352a1eb395c79ca29bb25d5978cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7001
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Since we already have infra for forcing arguments to builtins, this ends
up being almost *too* simple - we just return the second argument!
Change-Id: I070d3d0b551c4dcdac095f67b31e22e0de90cbd7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6999
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This resolves a TODO.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: If4d2124648ac88094e547e1ad7f1b446feb26182
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7010
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The previous serialisation format kind of lost the information about
what AST node we're dealing with (e.g. `1234` would serialise to an
AST with a literal `1234`).
That's great for pretty-printing the _code_, but we explicitly want to
serialise how rnix-parser parses something.
To that end, literals are now instead serialised into a structure like
all the other ones (`kind: literal` and appropriate value fields).
Change-Id: I586c95d7db41820b8ec43565ba4016ed3834d1b5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7030
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Home relative paths depend on the environment to be resolved. We have
elected to do everything that depends on the environment, e.g. resolving
SPATH expressions using NIX_PATH, at runtime, so tvix evaluation would
continue to behave correctly even if we separated the compilation and
execution phases more, e.g. via serializing bytecode. Then the value of
HOME, NIX_PATH etc. could reasonably change in the time until execution,
yielding wrong results if the resolution results were cached in the
bytecode.
We also take the opportunity to fix the broken path concatenation
previously found in the compiler, fixing b/205.
Another thing we could consider is emitting a warning for home relative
path literals, as they are by nature relatively fragile.
One sideeffect of this change is that home path resolution errors
become catchable which is not the case in C++ Nix. This will need to be
fixed up in a subsequent change.
Change-Id: I30bd69b575667c49170a9fdea23a020565d0f9ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7024
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
To assert that OpFindFile is only emitted for specially compiled SPATH
expressions, as well as make sure it doesn't accidentally operate on
“ordinary values”, introduce an UnresolvedPath internal value. If
OpFindFile sees a non-UnresolvedPath value, it'll crash.
Note that this change is not done purely for OpFindFile: We may want to
compile SPATH expressions as function calls to __findFile (like C++ Nix
does) in the future, so the UnresolvedPath value would definitely need
to be an ordinary string again then. Rather, this change is done in
preparation for resolving home dir relative paths at runtime (since they
depend on the environment) for which we'll need a similar mechanism to
OpFindFile.
Change-Id: I6acf287f35197cd9e13377079f972b9d36e5b22e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7023
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This implements serde::Serialize for the rnix AST through a wrapper
type, and exposes a function for serialising the AST into
a (pretty-printed JSON) string representation.
This can be used to debug issues with the AST, and to display an AST
reprsentation in tools like tvixbolt.
Serialize is implemented manually because we don't own any of the
structs and the way to traverse them is not easily derived
automatically, and this is quite verbose. We might be able to condense
it a little bit, but at the same time it's also fairly straightforward.
Change-Id: I922df43cfc25636f3c8baee7944c75ade516055c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6943
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Lambda has a quite large and variable-sized runtime representation,
unlike Rc<Lambda>. It would be easy to accidentally call clone() on
this and create input-dependent performance regressions.
Nothing in the codebase is currently using Lambda.clone(). Let's
remove the derived instance. If it's really needed it is very easy
to add it back in, but whoever does that will have to look at the
struct they're adding Clone to, which will hopefully prompt them to
think about whether or not that's really what they want to do.
Change-Id: I7806a741862ab4402229839ce3f4ea75aafd6d12
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7029
Autosubmit: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I believe this variant is left over from a previous implementation.
If not, please let me know.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I02a3bf2f63794d09e96a5a92a034c0ad3d1ff221
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7027
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Implement an *initial* version of builtins.match, using the rust `regex`
crate for regular expressions. The rust regex crate definitely has
different semantics than nix's regular expressions - but we'd like to
see how far we can get before the incompatibility starts to matter.
This consciously leaves out any sort of memo for compiled regular
expressions (which upstream nix also has) for the sake of expediency -
in the future we should implement that so we don't have to compile the
same regular expression multiple times.
Change-Id: I5b718635831ec83397940e417a9047c4342b6fa1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6989
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Using `serde_json` for parsing JSON here, plus an `impl FromJSON for
Value`. The latter is primarily to stay "dependency light" for now -
likely going with an actual serde `Deserialize` impl in the future is
going to be way better as it allows saving significantly on intermediary
allocations.
Change-Id: I152a0448ff7c87cf7ebaac927c38912b99de1c18
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6920
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Working on https://github.com/NixOS/nix/pull/7158, I discovered that C++
Nix actually is strict in the accumulator, just not in the first value.
This seems due to the fact that in the C++ evaluator, function calls
don't seem to be thunked unconditionally and foldl' just elects not to
wrap it in a thunk (don't quote me on this summary, even though it seems
to line up with the code for primop_foldlStrict and testable behavior).
It doesn't seem worth it to risk breaking the odd Nix expression just to
be strict in one more value per invocation of foldl' (i.e. the initial
accumulator value `nul`), so let's match the existing C++ Nix behavior
here.
Change-Id: If59e62271a90d97cb440f0ca72a58ec7840d1690
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7022
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This commit causes the test eval-okay-builtins.nix to pass.
It also adds tests/tvix_tests/eval-okay-dirof.nix which has better
coverage than the nix tests for this builtin.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I71d96b48680696fd6e4fea3a9861742b35cfaa66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6987
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This commit implements builtins.toPath. Like OP_ADD, it currently
does not handle string contexts.
This commit allows the
tests::nix_eval_okay_src_tests_nix_tests_eval_okay_pathexists_nix
test to pass.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Iadd4f7605f8f297adbd0dba187b8481c21370b6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6996
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Maybe I misunderstood this part of the code, but the use of `unsafe`
appears unnecessary here? In any event it is the one and only
`unsafe` in the codebase.
Hopefully getting to "no `unsafe` anywhere" is worth the extra
never-taken branch caused by unwrap() instead of unwrap_unchecked()?
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I33fbd5aad9d8307ea82c24b6220412783e1973c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7011
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The case branch in vm.rs for OpResolveWithOrUpvalue is
unreachable/deadcode.
I believe this opcode is unnecessary, since it should always be
statically detectable (at parse-time) whether a reference is to an
upvalue (i.e. enclosing binding); otherwise, and only then, is
with-resolution applicable.
Perhaps I've misunderstood how with-resolution works. If so, please
explain it to me and -1/-2 this CL.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I4a90b9eb6cb3396df92a6a943d42ecc301871ba0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7009
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This makes it easier to compare currently implemented ones with the full
list.
Change-Id: Ibaffd99d05afa15fc9ab644fd101afa24fc7a1b2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7008
Tested-by: BuildkiteCI
Autosubmit: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
When I first read the `README.md` I didn't know what this `mg build`
was. Some grepping around turned up `/tools/magrathea`. Apparently
this thing "helps me build planets". Awesome! Let's tell other
people where to find it. It seems that this tool is (currently)
specific to depot, so people who arrive at depot because of tvix
probably won't know where to find `mg`.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Icb8c51087fd41b696794516abcfee24a4b3b4a14
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6948
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: tazjin <tazjin@tvl.su>
This commit implements builtins.baseNameOf and adds a test case
eval-okay-basenameof.nix to the test suite.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ib8bbafba2ac9ca0e1d3dc5e844167f94890d9fee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6997
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
builtins.parseDrvName should not coerce its argument to a string.
This commit fixes that oversight in my previous commit, and adds an
xfail test to cover this condition.
Thanks to @sterni for noticing this.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I76bc78f1a82e1e08fe5c787c563a221d55de2639
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6991
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This commit adds support for running the "expected failure" tests in
both the nix and tvix test suites.
I have disabled the eval-fail-blackhole.nix test because it gets
stuck running forever.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Iba75ce6c8f2becab3c834fcfdd9f4fdc5a4bdb9f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6990
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
cppnix has merged #7149, so let's update our copy of their tests:
https://github.com/NixOS/nix/pull/7149
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I0be3bf9da937abd24102e1997daa2087ecfafd98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6992
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This path normalisation business causes runtime panics on WebAssembly
because those operations are unsupported.
Maybe this shouldn't be happening in the compiler anyways, not sure,
but for now this commit adds a workaround based on the target to
disable the normalisation if we're compiling for wasm.
Change-Id: I908a84fbdffc3401f8d443e2c73ec673e9f397ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7004
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Cppnix immediately absolutizes pathnames at parse time; if you write
`./foo`, it is immediately converted to `$(pwd)/foo` and manipulated
as an absolute path at all times.
To avoid having to introduce filesystem access operations in the
implementation of otherwise-pure builtins, let's guarantee that the
`root_dir` of the VM is always an absolute path.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I7cbbae2cba4b2716ff3f5ff7c9ce0ad529358c8a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6995
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Right now we're pretending that the Rust library path_clean does the
same thing that cppnix's canonPath() does. This is not true. It's
close enough for the test suite, but may come back to bite us.
Let's create our own canon_path() function and call that in all the
places where we intend to match the behavior of cppnix's
canonPath(). That way when we fix this we can fix it once, in one
place.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ia6f9577f62f49ef352ff9cfa5efdf37c32d31b11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6993
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
On Debian machines (and most FHS distros) /bin is now a symlink to
/usr/bin, which causes this test to fail. Let's use /etc as a
root-relative test case, since it is less likely to be a symlink.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I1c94de0d2a242394182442fe1c895dc17eb04a4a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6994
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
The nix_tests test suite produces lots of warnings. We can't fix
these, since they are kept in sync with upstream, so there's little
point in cluttering up the console with them every time the tests
are run.
Let's add a clap flag "warnings" and TVIX_WARNINGS environment
variable. The default is "true". The test runner overrides this
default and mutes the warnings.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I4b065f96fe15838afcca6970491a54e248ae4df7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6985
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This commit passes nix_eval_okay_src_tests_nix_tests_eval_okay_versions_nix.
See also: https://github.com/NixOS/nix/pull/7149
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I24605c2a0cd0da434f37f6c518f20693bfa1b799
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6913
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Since NixString is the Rust type for nix strings, people might
mistake NixPath for the Rust type of nix paths, which it is not.
Let's call it NixSearchPath instead.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ib2ea155c4b27cb90d6180a04ea7b951d86607373
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6927
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I broke the build.
I didn't understand that before hitting "submit" you need to re-test
your changes on latest HEAD (and that CI doesn't do that for you); I
failed to re-test cl/6912 following the merge of cl/6907.
This commit fixes the build by removing the overlapping instances.
Change-Id: I2a720d2c60cc7103b350f78102a8998f93bac828
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6965
Tested-by: BuildkiteCI
Autosubmit: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
When investigating discrepancies between foldl' in tvix and C++ Nix,
I discovered that C++ Nix's foldl' doesn't seem to be strict at all.
Since this seemed wrong, I looked into Haskell's foldl' implementation
which doesn't force the list elements (`val` in our code), but the
accumulation value (`res` in our code). You can look at the code here:
https://hackage.haskell.org/package/base-4.17.0.0/docs/src/GHC.List.html#foldl%27
This actually makes a lot of sense: If `res` is not forced after each
application of `op`, we'll end up thunks nested as deeply as the list is
long, potentially taking up a lot of space. This can be limited by
forcing the `res` thunk before applying `op` again (and creating a new
thunk).
I've also PR-ed an equivalent change for C++ Nix at
https://github.com/NixOS/nix/pull/7158. Since this is not merged nor
backported to our Nix 2.3 fork, I've not copied the eval fail test yet,
since it wouldn't when checking our tests against C++ Nix in depot.
Change-Id: I34edf6fc3031fc1485c3e714f2280b4fba8f004b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6947
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This *maybe* should do something to check that we don't pass both a file
and an expr, but for now this is useful enough to cut corners (plus
we're probably due for a CLI revamp eventually anyway).
Change-Id: Id44357074150b336b6215ba596cc52d01d037dbd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6941
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is currently implemented with a simple println inline, but in the
future we could hook into this via something pluggable on the VM.
Change-Id: Idd9cc3b34aa13d6ebc64c02aade81ecdf439656a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6938
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Previously, the VM assumed that if an error was returned from `run()`,
the evaluation was "finished" and the state of the VM didn't matter.
This used to be a reasonable assumption, but now that we've got
`tryEval` around we need to actually make sure that we clean up after
ourselves if we're about to return an error. Specifically, if the *last*
instruction in an evaluation frame returns an error, we previously
wouldn't pop that evaluation frame, which could cause all sorts of
bizarre errors based on what happened to be in the stack at the time.
This commit splits out a `run_op` method from `VM::run`, and uses that
to check the evaluation frame return condition even if the op we're
running is about to return an error, and pop the evaluation frame if
we're at the last instruction.
Change-Id: Ib40649d8915ee1571153cb71e3d76492542fc3d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6940
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Currently, the span on *all* thunk force errors is the span at which the
thunk is forced, which for recursive thunk forcing ends up just being
the same span over and over again. This changes the span on thunk force
errors to be the span at which point the thunk is *created*, which is a
bit more helpful (though the printing atm is a little... crowded). To
make this work, we have to thread through the span at which a thunk is
created into a field on the thunk itself.
Change-Id: I81474810a763046e2eb3a8f07acf7d8ec708824a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6932
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Previously the various call functions either returned `EvalResult<()>`
or `EvalResult<Value>`, which was confusing.
Now only vm::call_with returns a Value directly, and other parts of
the API just leave the stack top in the post-call state.
This makes it easier to reason about what's going on in non-tail-call
cases (which are making a comeback).
Change-Id: I264ffc683a11aca72dd06e2220a5ff6e7c5fc2b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6936
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Instead of just printing the number of errors (useless!) actually emit
separate diagnostics for each nested error.
Change-Id: I97b53c3276c906af5def89077b5b6ba6ec108b37
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6933
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Despite this not being documented, `tryEval` is empirically able to
catch errors caused by a <...> path not resolving (and nixpkgs depends
on this).
Change-Id: Ia3b78a2d9d2d0c603aba829518b351102dc55396
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6926
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Since the body of an `if` expr can refer to deferred upvalues, it needs
to be thunked so when we actually compile those deferred upvalues we
have something for the finalize op to point at. Without this all sorts
of weird things can happen due to the finalize op being run in the wrong
lambda context, up to and including a panic.
Change-Id: I040d5e1a7232fd841cfa4953539898fa49cbbb83
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6929
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
With asserts compiled using conditional jumps, this ends up being quite
straightforward - the only real tricky bit is that we have to know
whether an error can or can't be handled.
Change-Id: I75617da73b7a9c5cdd888c0e26ae81d2c5c0d714
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6924
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This commit implements (lazy) resolution of `<...>` paths via either the
NIX_PATH environment variable, or the -I command-line flag - both
handled via EvalOptions. As a result, EvalOptions can no longer derive
Copy, meaning we have to clone it at each line of the repl - this is
probably not a huge deal as repl performance is not exactly an inner
loop and we're not cloning very much.
Internally, this works by creating a thunk which pushes a constant
containing the string inside the brackets to the stack, then a new
opcode to resolve that path via the `NixPath`. To get that opcode to
work, we now have to pass in the NixPath when constructing the VM.
This (intentionally) leaves out proper implementation of path resolution
via `findFile` (cppnix just calls whatever identifier called findFile is
in scope!!!) as that's widely considered a bit of a misfeature, but if
we do decide to implement that down the road it likely wouldn't be more
than a few extra ops within the thunk introduced here.
Change-Id: Ibc979b7e425b65cbe88599940520239a4a10cee2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6918
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Add a simple struct implementing both the string parsing and path
resolution rules of Nix's `NIX_PATH` environment variable, for use in
resolving `<...>`-style paths
Change-Id: Ife75f39aa5c12928278d81fe428fbadc98bac5cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6917
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Implement adding paths and strings via OpAdd. Since the nix rules are
quite obscure, I'm electing to test this one with an oracle test to
avoid the danger of getting the actual asserted result wrong.
Change-Id: Icdcca3690ca2e8459e386c1f29cc48eaaa39e9a3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6914
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
In order to behave nicely with tryEval, asserts need to leave the
instruction pointer in a reasonable place even if they fail - whereas
with the previous implementation catching a failed assert would still
end up running the op for the *body* of the assert. With this change, we
compile asserts much more like an `if` expression with conditional jumps
rather than having an OpAssert op.
Change-Id: I1b266c3be90185c84000da6b1995ac3e6fd5471b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6925
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The process of calling a function from a builtin, especially if it's got
more than 1 arrgument, is reasonably involved and easy to get wrong due
to having to interact directly with the stack - instead of having that
done entirely manually in builtins, this wraps it up in a new
`call_with` function which handles pushing arguments onto the stack and
recursively calling the (partially applied) function.
Change-Id: I14700c639a0deca53b9a060f6d70dbc7762e9007
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6910
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Implement the listToAttrs builtin, which constructs an attribute set
from a list of attribute sets with keys name and value.
This is tested using an adaptation of the nix `eval-ok-listtoattrs.nix`,
with the utilities from `lib.nix` inlined.
Change-Id: Ib5bf743466dda9722c2c1e00797df4b58448cf0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6894
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is generally more idiomatic (over just delegating to Debug), and
also allows us to avoid intermediate allocations if we ever end up
using error messages as part of larger strings (because we don't have to
allocate a full String for the return value).
Change-Id: I67e48b44570c72761ed0fcaded9ae4bf3fcbaacf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6896
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Similar to what we do for import, push on a `default.nix` to the path
that the top-level is invoked with (if any) if it's a directory.
Change-Id: I281bd44e3c8803b6765c886ae5fd08f549e2e563
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6895
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
When contrasting the compilation of the desugared version to the
"sugared" version, this was the noticeable difference.
This fixes b/203.
Change-Id: Iae02ffc56e06de1de091b84cdc59d8fe83a17d69
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6898
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This requires actually passing the source directory into `interpret` in
the eval tests, but otherwise this is fairly straightforward - if we're
trying to import a directory, just push `default.nix` onto it and import
that instead.
Change-Id: I0b7d4234f81977e78d14dfa651bf0cf9721017e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6893
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Factor out the construction of Value::Attrs (including the Rc) into a
new `attrs` constructor function, to abstract away the presence of the
Rc itself.
Change-Id: I42fd4c3841e1db368db999ddd651277ff995f025
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6892
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Thunks correctly force when comparing for equality against other thunks,
but weren't being forced correctly when comparing against non-thunk
values, in either direction.
Change-Id: Ia03702895ec4d70aed3445c1b0a9a7a641d1a300
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6897
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Adds secondary spans for errors that occur deeply nested within a
thunk.
This is pretty raw right now, there's technically nothing stopping one
of these error chains from being a hundred thunks deep into code,
producing unmanageable error output. We should trim these down
according to some heuristics (e.g. when crossing file boundaries, o r
just - for starters - beginning and end).
Change-Id: Ia73892512737850b6fa3e07cabc37fa9c534c4d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6872
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This change is quite verbose, so a little bit of explaining:
1. To correctly format parse errors, errors must be able to return
more than one annotated span (the parser returns a list of errors
for each span).
To accomplish this, the structure of how the `Diagnostic` struct
which formats an error is constructed has changed to delegate the
creation of the `SpanLabel` vector to the kind of error.
2. The rnix structures don't have human-readable output formats by
default, so some verbose methods for formatting them in
human-readable ways have been added in the errors module. We might
want to move these out into a submodule.
3. In many cases, the errors returned by rnix are a bit strange - so
while we format them with all information that is easily available
they may look weird or not necessarily help users. Consider this CL
only a first step in the right direction.
Change-Id: Ie7dd74751af9e7ecb35d751f8b087aae5ae6e2e8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6871
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This logic was duplicated between the two rnix types before, but more
crucially - it is also needed for correctly displaying the text ranges
contained in syntax errors.
Change-Id: Ifc6a521de1594d6ced9cba6274f1931df99b6634
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6870
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This is also useful for error-handling related logic, outside of just
the compiler module.
Change-Id: I5c386e2b4c31cda0a0209b31136ca07f00e39e45
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6869
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This enables the use of string paths (and, in the future,
derivations), as long as their string values represent an absolute
path.
Change-Id: I4b198efeb70415ed52f58bd1da6fa79a24dad14c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6866
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This lets the VM emit warnings when it encounters situations that
should only be warned about at runtime.
For starters, this is used to pass through compilation warnings that
come up when `import` is used.
Change-Id: I0c4bc8c534d699999887c430d93629fadfa662c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6868
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Adding `import` to builtins causes causes a bootstrap cycle because
the `import` builtin needs to be initialised with the set of globals
before being inserted into the globals, which also must contain
itself.
To break out of the cycle this hack wraps the builtins passed to the
compiler in an `Rc` (probably sensible anyways, as they will end up
getting cloned a bunch), containing a RefCell which gives us mutable
access to the builtins.
This opens up a potentially dangerous footgun in which we could mutate
the builtins at runtime leading to different compiler invocations
seeing different builtins, so it'd be nice to have some kind of
"finalised" status for them or some such, but I'm not sure how to
represent that atm.
Change-Id: I25f8d4d2a7e8472d401c8ba2f4bbf9d86ab2abcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6867
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This adds an initial working version of builtins.import which
encapsulates the entire functionality of `import` within the builtin
itself, without requiring any changes in the compiler or VM.
The key insight that enables this is that we can simply return a Thunk
from `import` that is constructed from the output of running the
compiler and - ta-da! - no other component needs to know about it.
A couple of notes:
* builtins.import needs to capture variables like the SourceCode
structure. This means it can not currently be constructed the same
way as other builtins and has special handling, which leaks out to
`eval.rs`. I have postponed dealing with that until we have this
working a bit more.
* the `globals` are not yet passed through
* the error representation for the new variants is absolutely not done
yet, we probably want to switch to something that supports
cause-chaining now (like miette)
* there is no mechanism for emitting warnings at runtime; we need to
add that
Change-Id: I3117a7ae3ff2432bf44f5ff05ad35f47faca31d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6857
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
For some upcoming builtins (notably, import) we need to capture
arguments in the builtin's implementation.
To allow this, we can no longer use function pointers for builtins,
but must use a reference-counted closure object instead.
Unfortunately this adds an extra pointer operation to every builtin
call. We should benchmark this later against having a split builtin
representation.
Change-Id: I109d98d0e25998870542f47573eb1ec2e546f2a2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6856
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
nixpkgs has hardcoded references to Nix versions, we need to provide
it with something that looks like a Nix version while actually being a
Tvix version.
For now, we do this by stealing a trick out of the browser book and
constructing a version that looks like a Nix version to Nix, but like
a Tvix version to people who know what they are looking for.
Nevermind that we don't actually have any kind of versioning for
Tvix (yet?), other than depot revisions.
Change-Id: I7ce8079dd8164a2079891d38e707f09a45f0bbc1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6858
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type hides away the lower-level handling of most codemap data
structures, especially to library consumers (see corresponding changes
in tvixbolt).
This will help with implement `import` by giving us central control
over how the codemap works.
Change-Id: Ifcea36776879725871b30c518aeb96ab5fda035a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6855
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
There's basically nothing that needs *ownership* of an AST
node (which is just a little box full of references to other things
anyways), so we can thread this through as references all the way.
Change-Id: I35a1348a50c0e8e07d51dfc18847829379166fbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6853
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
There are actually two different types of observers, the ones that
observe the compiler (and emitted chunks from different kinds of
expressions), and the ones that trace runtime execution.
Use of the NoOpObserver is unchanged, it simply implements both
traits.
Change-Id: I4277b82674c259ec55238a0de3bb1cdf5e21a258
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6852
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Until we can display a chained representatino of errors in thunks, it
is most useful to forward the error code from the innermost error to
the user.
Change-Id: I8d67254d52313be40387f080e57966c001e0d51c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6854
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Returns time since epoch in seconds.
This has a slight behaviour difference from Nix, in that we don't pin
the time between REPL entries (Nix pins it for the program lifetime),
but this is probably inconsequential as long as it is pinned during an
evaluation.
Change-Id: I010c02e93097a209d8ad69e278397c7e30e54c86
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6846
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Allows impure builtins that have a different shape than a Rust
function pointer; specifically this is required for
builtins.currentTime which does not work in WASM.
Change-Id: I1362d8eeafe770ce4d1c5ebe4d119aeb0abb5c9b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6849
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Concatenates (but not flattens) a list of lists.
Change-Id: I692e0b3e7b5a5ff93d5768d3a27849b432ec5747
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6843
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is the same code as before, just moved into a trait impl to gain
access to stuff that needs IntoIterator
Change-Id: Iff9375cd05593dd2681fa85ccc7f4554bf944a02
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6842
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This can actually legitimately be emitted by the compiler currently
when compiling formals with default values. See the scope6 test from
the Nix test suite for an example.
We should restructure this slightly to be able to reintroduce a
runtime error here in case something was compiled incorrectly.
Change-Id: Ib81f0f58ae0e850db9fbc459458b7bd0d3ac6f23
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6841
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This implements __functor calling in situations where `OpTailCall` is
used, but not yet for `OpCall`.
For some reason I have not yet figured out, this same implementation
does not work in call_value, which means that it also doesn't yet work
in builtins that apply functions.
Change-Id: I378f9065ac53d4c05166a7d0151acb1f55c91579
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6826
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Add a new derivation target to the passthru of tvix.eval that builds the
benchmark binaries, *and* copies them to the outupts of the derivation
via the (somewhat arcane) `copyBinsFilter` jq script arg to naersk. This
is a bit annoying because (as far as I can tell) the derivations
returned by naersk aren't directly overridable, so we have to explicitly
fixpoint the attrs we're passing.
Also, since this is now a separate target to build the benchmarks, we
can remove `--all-targets` from the build of `tvix-eval` itself since
that was only added to build benchmarks in CI, and make
regular (non-benchmark) builds a bit faster.
Change-Id: I136b8526790545e93b1ae666abaefb51cbbee390
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6847
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The idea is that we can keep track of the more unexpected behavior,
behavior that maybe should not be a thing at all and behavior we are not
sure about yet.
Change-Id: I70933f00af1230a7ab9d30e917b61199fe571caf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6803
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This function previously kept a borrow in the form of the
`Thunk::value` result alive while performing arbitrary actions in the
VM, which caused a borrowing error in the test case attached.
The `Ref` value must never be used in cases where control flow is
passed to other parts of the VM.
Change-Id: I41d10aa1882a2166614b670e8ba77aab0e67deca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6825
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This finishes up the implementation of nested keys after the key
insight that the nesting level does not need to be tracked, and
instead the attribute iterator can simply be retained inside the
structures as is (in an advanced state).
With this implementation, when encountering a nested key, the Tvix
compiler will first analyse whether there is already a matching
binding that can be merged (i.e. a binding that is a literal attribute
set), and perform the merge, or otherwise create a new recursive set
of bindings in which the entry is inserted with the path iterator
advanced beyond the first name component.
With this, all the logic simply applies recursively until there are no
more nested bindings (i.e. until all iterators are "empty").
Note that this has one (potentially insignificant) deviation from Nix
currently: If a non-mergable value is supplied (e.g. `a.b = 1; a =
2;`), Tvix will emit a *runtime* error (whereas it is *parse* time in
Nix) as the branch which could statically analyse this is currently
unreachable. There's a TODO for this, so we can fix it up later.
Change-Id: I53df70e09614ff4281a70b80eac7da3beca12da9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6806
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is actually quite useless, as we can just pass
`AstChildren<ast::Attr>` around after partially consuming it.
Change-Id: If0aefa2b53fc801fced1ae0709bff93966bf19f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6804
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
When encountering a nested binding for the first time, cleanly flip
the representation to `Binding::Set` in `Binding::merge` before
proceeding with the actual merge.
This reduces the number of points where we have to deal with the (soon
to be slightly more complex) construction of the nested binding
representation.
Change-Id: Ifd43aac7b59ebd15a72c3ec512386a5bcf26ec13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6802
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This adds the scaffolding required for tracking the nesting level (and
appropriately skipping the correct amount of attrpath entries when
inserting nested sets).
In order for all of this to work correctly, we can no longer track
`AttrpathValue` directly in the entries vector as rnix does not allow
us to construct values of that type - so instead we have to track its
inner components.
Change-Id: Icb18e105586bf6c247c2e66c302cde5609ad9789
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6801
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is a significant step towards correctly implemented nested
bindings. All attribute sets defined within the same binding scope
will now be merged as in Nix, if they use the same key.
Change-Id: I13e056693d5e73192280043c6dd93b47d1306ed6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6800
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This sets up the required logic for finding and merging attribute sets
into nested bindings if they exist. This is absolutely not complete
yet and can, at this commit, probably cause undefined runtime
behaviour if nested attributes are specified.
The basic idea is that a new helper function on the `TrackedBindings`
struct is called with each encountered attribute and determines
whether the new entry can be merged into an existing attribute or not.
Right now the only effect this has in practice is that a new error
becomes available if somebody attempts to cause a merge into an
inherited key.
Change-Id: Id010df3605055eb1ad7fa65241055889dd21bab0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6798
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This needs to move here so that we can reuse compile_bindings for the
nested attribute sets we're about to start constructing.
Change-Id: Ie83f52f7e1d128886e96a1da47792211fa826f21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6796
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This struct will be the key to correctly compiling nested bindings, by
having insertions flow through some logic that will attempt to bind
attribute-set-like things when encountering them.
Change-Id: I8b5b20798de60688f3b6dc4526a460ebb2079f6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6795
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This implementation, which only ever worked for non-recursive
attribute sets, is no longer needed and thus removed here.
We have a new implementation of these nested keys coming up instead.
Change-Id: I0c2875154026a4f5f6e0aa038e465f54444bf721
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6783
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As of this commit, all three types of bindings scopes are compiled the
same way (i.e. compilation of non-recursive attribute sets has been
switched over to the new code paths).
This sets us up for doing the final implementation of nested attribute
sets.
HOWEVER, this breaks the existing implementation of nested attributes
in non-recursive attribute sets. That implementation is flawed and
unworkable in practice, so we need to do this dance to be able to
implement it correctly.
Change-Id: Iba2545c0d1d6b51f5e1a31a5d005b8d01da546d3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6782
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This wires up the new bindings setup logic to be able to thread
through & compile dynamic attributes in recursive attrs.
It seems like we don't actually need to retain the phasing of Nix
exactly, as we can use the phantom mechanism to declare all locals
without making the dynamic ones accessible.
Change-Id: Ic2d43dd8fd97d7ccd56d8c6adf2ff97274cd837a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6781
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Another slice of the salami, but no functionality changes yet (other
than opening a code path that can reach a `todo!()`, but this will be
removed soon).
Change-Id: I56b4ed323f70754ed1ab27964ee3c99cf3bf3292
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6780
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The previous way of sanitising dynamic keys is going away as we're
slowly introducing the new nested key logic.
While touching this stuff, I've also changed all the related string
types to SmolStr as that is more sensible for identifiers.
Change-Id: If30c74151508719d646d0e68e7d6f62c36f4d23f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6779
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Removes the `compile_inherit_attrs` logic which was only used for
BindingsKind::Attrs (i.e. non-recursive attrs).
This brings us a step closer to fully merging all the binding logic
into one block that can dispatch based on the kind of bindings (and
thus giving us a good point to introduce the final logic for nested
bindings).
Change-Id: If48d7a9497fc084a5cc03a130c2a7da5e2b8ef0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6776
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This helper is responsible for declaring the bindings in the
compiler's scope tracking structures.
It is almost equivalent to the previous logic, but also accounts for
`BindingsKind::Attrs` - though those code paths do not end up here
yet.
Change-Id: I44f617b99b10f2a7b9675f7b23e2c803a4a93d29
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6775
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is responsible for actually setting up `TrackedBinding`s on the
stack, i.e. in some sense "actually compiling" values in bindings.
There is no functionality change to before, i.e. this is a salami
slice.
Change-Id: Idb0312038e004470a7d130c020ae0fe87c55c218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6774
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Splits the large `compile_inherits` function which
previously *compiled* plain inherits and *declared* namespaced
inherits into `compile_plain_inherits` and
`declare_namespaced_inherits`.
This is supposed to make more sense than before, but is still not
consistently used (notably, non-recursive attribute sets still
duplicate most of this logic).
Another salami slice.
Change-Id: Id97fac1cbd5ee97b24d047e7728655e6b7734153
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6773
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
... but do not use it yet.
This refactoring is pretty complicated, so I'm applying salami-slicing
tactics here.
Change-Id: I66e04ee10548f68bf67dc842f3f14cc279426c22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6772
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As part of the unification of binding logic between different carriers
of bindings, we need to track which kind of bindings we are dealing
with (attribute set? recursive scope? ...) to correctly emit keys and
declare identifiers in the locals stack.
Right now this changes no functionality as `BindingsKind::Attrs` is
not yet used (only RecAttrs and LetIn, which was previously
represented by the `rec_attrs` boolean).
Change-Id: Id2ac27894079ab584521cb568d75c124f7bf2403
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6771
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This helper will gain the ability to compile both kinds of inherits,
but it is kind of tricky to get right so I am doing it in smaller
steps. Right now there is no change in functionality.
Change-Id: Ie990b88dd90a5e0f9fd79961ee09a6c83f2c872d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6770
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This just describes a binding, and we do need a good name for the kind
of binding*s*, which is going to be introduced soon.
Change-Id: I53900ee52da8a07dae8b918fa6a4cb308e627efb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6768
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Changes the module structure of the compiler to have a module
dedicated to the logic of setting up bindings. This logic is in the
process of being merged between attribute sets and `let`-expressions,
and the structure of the modules makes more sense when ecapsulating
that specifically.
(Other bits of code related to e.g. attribute sets are pretty
straightforward and can just live in the main compiler module).
Change-Id: I9469b73a7034e5b5f3bb211694d97260c4c9ef54
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6766
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This was added in preparation for some builtins that don't exist yet
and is producing some noise during compilation.
Change-Id: I51fb0d14c3edf0bd6d9a288d50e44dacf35166c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6769
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is a little ugly because the plain Iterator::filter method can
not be used (it does not support fallible primitives), so we need to
resort to an `Iterator::filter_map` and deal with the wrapping in
Options everywhere.
This prevents use of `?` which introduces the need for some matching,
but it's not *too* bad.
Change-Id: Ie2c3c0c9756c4c627176f64fb4e0054e717c26d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6765
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The previous version had a bug where we assumed that the number of
entries in an attribute set AST node would be equivalent to the number
of entries in the runtime attribute set, but due to inherit nodes
containing a variable number of entries, this did not work out.
Fixes b/199
Change-Id: I6f7f7729f3512b297cf29a2e046302ca28477854
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6749
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Fairly straightforward, only thing of note is that we coerce (weakly) to
string here as well.
Change-Id: I03b427e657e402f1f9eb0f795b689bbf5092aba1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6745
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
The simplest solution seems to be to pass references to arithmetic_op!()
which avoids the moving annoyance we had to deal with in the
builtins (no more popping!). We then use .force() to force the values
and dereference any Thunks (which arithmetic_op! doesn't do for us).
Change-Id: I0eb8ad60e80a0b3ba9d9f411e973ef8bcf136989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6724
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Because `inherit` can take string identifiers, we can access
arbitrarily weird identifiers in scopes using it.
Change-Id: Ic868233221befa160538dd2ffaff1cc7f566585a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6748
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This updates rnix-parser to a version where inherits provide an
iterator over `ast::Attr` instead of `ast::Ident`, which mirrors the
behaviour of Nix (inherits can have (statically known) strings as
their identifiers).
This actually required some fairly significant code reshuffling in the
compiler, as there was an implicit assumption in many places that we
would have an `ast::Ident` node available when dealing with variable
access (which is then explicitly only not true in this case).
Change-Id: I12f1e786c0030c85107b1aa409bd49adb5465546
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6747
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We delegate to Rust std's Ord trait, so we should at least do a sanity
check here.
Change-Id: I9596068f8ab3e51b79602de0bac79af6d558086e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6723
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Sketch out a new set of "impure" builtins, which supplement the existing
set of "pure" builtins but are gated behind a feature flag, which allows
them to be omitted by crates depending on tvix-eval that only want pure
evaluation, such as tvixbolt.
Change-Id: I2736017b5c9b4776bbba8758e108ec84887abd66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6655
Reviewed-by: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
This was derived from
else if (c1 == "" && n2) return true; // true implies c1 < n2
However, this has no effect since Word always looses out against Number
anyways and the `pre` rules are also unaffected by this change – since
this only affects comparison of an empty Word part with a Number.
Change-Id: Ia04e42ac726352b688c87674b0fdb355f06edbcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6722
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This asserts the not-quite lexicographical property of the comparison.
Change-Id: Iad68081e4b3a7106513f479643de87065dc47739
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6721
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is necessary because builtins.compareVersions compares versions in
a subtly not-quite-but-still-lexicographical way: `pre` for example can
have an effect if it is post-fixed: `2.3 < 2.3pre`. This is a violation
of the rule that in a lexicographical ordering, the longer string is
considered greater if they are otherwise equal. builtins.compareVersion
is comparing lexicographically though, if you do the following
transformation beforehand:
2.3 --split--> [ "2" "3" ] --append--> [ "2" "3" "" ]
2.3pre --split--> [ "2" "3" "pre" ] --append--> [ "2" "3" "pre" "" ]
Comparing the transformed version is then done lexicographically:
2.3 < 2.3.0pre since [ "2" "3" "" ] < [ "2" "3" "0" "pre" ]
Here, the `pre` rule never comes into effect because no comparison on it
happens, instead we use the longer string rule of a lexicographical
comparison.
In the C++ codebase, the reason for this behavior is that the
iterator-esque construct they use always yields the empty string before
it exposes it has been fully consumed. This is probably intentional to
support the postfixed `pre` which is, for example, used by NixOS
versions (e.g. unstable post 22.05 is 22.11-pre). We replicate this
behavior using the `Chain` iterator in `VersionPartsIter::new_for_cmp`.
Change-Id: I021c69aa27b0b7deb949dffe50ed18b6de3a7b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6720
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is based on the [relevant code] in C++ Nix. Our version has more
branches because the C++ one only checks if it is less than or not, so
can save handling a few cases. We on the other hand, can avoid calling
the algorithm twice. It'd be nice to implement proptests for this in the
future and to make sure that this weird little algorithm doesn't violate
the Ord laws.
[relevant code]: cd35bbbeef/src/libstore/names.cc (L81-L94)
Change-Id: I46642e6da5eac7c0883cdce860622cdba04cd12b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6719
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This was fairly easy, thanks to the work already done by Thomas Frank.
However, the implementation is suboptimal because we parse number parts
only to convert them back to strings afterwards. I've chosen to tackle
this problem in the future, since having an (inefficient) implementation
of splitVersion will be helpful for debugging the slight discrepancies
between C++ Nix and Tvix in the case of compareVersions.
Change-Id: Id6ed8eeb77663ff650c8c53ea952875b1fb7ea84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6688
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This makes it possible to call a callable value (builtin or
closure/lambda) directly, without unwrapping it first. This is needed
for pretty much all higher-order functions to work correctly.
This is mostly equivalent to the previous code in coerce_to_string for
calling `__toString`, except it expects the argument(s) to already be
placed on the stack.
Note that the span for the `NotCallable` error is not currently
guaranteed to make any sense, will experiment with this.
Change-Id: I821224368d438a28900858b343defc1817e46a0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6717
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Generate smaller recursive values for generated Values, and run fewer
cases for the attrs proptests which are particularly egregious.
Change-Id: Ia35c7c120270feaf045be1deb440c87ebb185c27
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6716
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As we already have a VM passed to the builtins, we can simply execute
the provided closure/lambda in it for each value.
The primary annoyance with this is that we have to clone the upvalues
for each element, but we can try making this cheaper in the
future (it's also a general problem in the VM itself).
Change-Id: I5bcf56d58c509c0eb081e7cf52f6093216451ce4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6714
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Previously we only matched the outer constructor after forcing which
would mean that we would always return `false` if the inspected value
was a thunk, regardless what value would be present inside.
Change-Id: I361ea6e855e23ef8e5b59098a50b9cd59253803f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6692
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, this would almost always crash because list items are
thunked more often nowadays and selecting from a thunk would fail. Also
we no longer pop from args, accessing it by index should avoid an
unnecessary clone here.
Change-Id: I4410c4c2e28cc255a2c7cf2a5322db3d2c556a0e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6693
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
And insert the missing newline the C++ Nix test script needs.
Change-Id: I04ddd7268f9caa1414fd23314c281bb7c1e854cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6689
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of arity, we pass a array reference to Builtin::new that
describes how many arguments there are and which of them need to be
forced, eliminating the need to force manually.
Note that this change doesn't fix some of the instances where the the
Builtin doesn't consider that the value could be a Thunk.
Change-Id: Iadb58bb79886c30dc6b09dcf0ffad8abf28036a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6662
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
TL;DR:
- support `builtins.tail`
- define `ErrorKind::TailEmptyList` and canonical error code
- support basic unit tests
Unsure whether or not the error should be a dedicated `ErrorKind`...
Change-Id: Iae90fda1bb21ce7bdb1aaa2aeb2b8c1e6dcb0f05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6545
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Refactor the `force!` macro to a method on `Value` which returns a
smart-pointer-esque type, which simplifies the callsite and eliminates
rightward drift, especially for high-arity builtins.
Change-Id: I97a7837580accfb4bbd03b24f2acdbd38645efa5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6656
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Previously only the first one was guaranteed to be forced, but we need
to do this for all of them.
Fixes b/190
Change-Id: I76b5667dbfb2f3fde3587e7b91d268cbf32aca00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6645
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Document the OpAttrs op, paying special attention to the (perhaps
confusing) behavior of taking the number of *pairs*, not the number
of *values*, which will be popped off the stack into the resulting attr
set.
Change-Id: I64df0290308ecae7a5c7e14ead37091d32701507
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6654
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Refactor the environment variable and argument parsing for the tvix repl
to use Clap instead of doing things ad-hoc, and thread through options
obtained from environment variables via explicit arguments rather than
obtaining them from the environment as they're needed. This makes adding
more flags more sustainable, and also makes the binary fully
self-documenting, including supported env vars, via `--help`.
Change-Id: Ib1f6a0cd20056e8c9196760ff755fa5729667760
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6653
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Thunks might be encountered deep in equality comparison (eg nested
inside a list or attr-set), at which point we need to force them in
order to compare them for equality (or else we panic when trying to get
at their value).
Fixes: b/192
Change-Id: I912151085f8298f30d5214c7965251c9266443f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6652
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Pass in, but ignore, a mutable reference to the VM to the `nix_eq`
functions, in preparation for using that VM to force thunks during
comparison.
Change-Id: I565435d8dfb33768f930fdb5a6b0fb1365d7e161
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6651
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Using rust's PartialEq trait to implement Nix equality semantics is
reasonably fraught with peril, both because the actual laws are
different than what nix expects, and (more importantly) because certain
things actually require extra context to compare for equality (for
example, thunks need to be forced). This converts the manual PartialEq
impl for Value (and all its descendants) to a *derived* PartialEq
impl (which requires a lot of extra PartialEq derives on miscellanious
other types within the codebase), and converts the previous
nix-semantics equality comparison into a new `nix_eq` method. This
returns an EvalResult, even though it can't currently return an error,
to allow it to fail when eg forcing thunks (which it will do soon).
Since the PartialEq impls for Value and NixAttrs are now quite boring,
this converts the generated proptests for those into handwritten ones
that cover `nix_eq` instead
Change-Id: If3da7171f88c22eda5b7a60030d8b00c3b76f672
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6650
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This disconnects ownership of the `File` reference in a compiler from
the calling scope, which is required for when we implement `import`.
`import` will need to carry an `Rc<RefCell<CodeMap>>` (or maybe, in
the future, Arc) to give us the ability to add new detected code
files at runtime.
Note that the choice of `Arc` over `Rc` here is not ours - it's the
codemap crate's.
Change-Id: I3aeca4ffc167acbd1701846a332d93550b56ba7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6630
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
As before, this limits the cases to a relatively small number because
otherwise things get quite large.
Change-Id: I5371dc56418fca52e1dd1d905b20868f647091ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6649
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Only running 20 cases for now, since Value can get quite big if you let
it run for a while.
Change-Id: I09ef19da22c789c4869793836c98937c44595340
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6648
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this was found by proptests!
Change-Id: I16d6a6ece3b20cdddd6f78c94cc87befb1b651e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6647
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add an optional config argument to the `<trait>_laws` macros, to allow
configuring the generated tests with a ProptestConfig struct (to limit
the number of cases run)
Change-Id: I2143ddb72c6a870e8be4a9058135b6f9a703039e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6646
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Impl Arbitrary for Value (and NixAttrs and NixList) in the same way we
did for NixString. Value currently only generates non-"internal"
values (no thunks, AttrNotFound, etc.) and can't generate
functions (builtins or closures), because those'd require full
generation of tvix bytecode, which is a bit more work than I'd like to
do now - there's a `todo!` left in the code for a place where we could
allow opting-in to internal values and functions later.
Change-Id: I07a59e2b1d89cfaa912d4ecebd642caf4ddb040a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6627
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is pretty boring at the moment, but mostly serves as a foot in the
door in the direction of writing more tests
Change-Id: Id88eb4ec7e53ebb2d5b5c254c8f45ff750238811
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6637
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Invalid integers (eg integers that're too long) end up as error returns
on the `.value()` returned from the literal in the AST - previously we'd
unwrap this error, causing it to panic the compiler, but now we've got a
nice error variant for it (which just unwraps the underlying
std::num::ParseIntError).
Change-Id: I50c3c5ba89407d86659e20d8991b9658415f39a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6635
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This bumps rnix-parser to a commit that should be unaffected by the
Nix >= 2.4 bug that prevents it from cloning repositories with filters.
Change-Id: Ie01da95245ec6740fa889eb710819e512202f665
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6634
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Just want to note those down somewhere before I forget them again,
we can delete them later if we have it all figured out.
Change-Id: Icafa2d8fc7ca39e38e9637b7eca6f2bbf487c2b8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6632
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add a suite of proptests covering the laws of the handwritten stdlib
trait impls (Eq, Ord, and Hash) for String, generated from a new set of
macros for generating those tests which can be applied to other types.
Change-Id: Ib3276c9e96fca497aece094e5612707d3dc77ccd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6626
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The From<String> impl for NixString only generates StringRepr::Heap
strings, but we want to make sure we're testing StringRepr::Smol too
Change-Id: I6d04b9cf12ef8462fe2788e0c6414b165f40311d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6629
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
It's proptest time!
Add deps on the proptest and test_strategy crates, gated behind a
new (default-enabled) "arbitrary" feature flag so that they don't affect
dependencies of things like tvixbolt that depend on tvix.
These are going in dependencies, not dev-dependencies, so that we can
impl Arbitrary for stuff outside of test modules (which will be
important for integration suites which want to run proptests)
Change-Id: I1613bd3ea9a835e22986ad4e59700e8736007963
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6624
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This matches the name of the AST node from which it was compiled.
Suggested by sterni in cl/6231
Change-Id: Ia51525158d2f47467c01fce2282005b1a8417a47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6623
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Add the start of a test suite that compares tvix eval results against
nix, using the string repr of the value as the comparison. This shells
out to a nix-instantiate binary, which is configurable as an environment
variable, to eval - there's some extra machinery there to setup a new
nix store as a tempdir to allow running this test inside the nix build
for tvix-eval itself.
Currently this has a macro that'll allow writing lots and lots of
hardcoded tests, but going forward I'm also going to be looking into
adding proptest-based generation of expressions to compare.
Change-Id: I9f4895fab1e668ed2b7dfd6f92f8c80de1bbb16b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6307
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... it would be nice if we could thread it through to the `Scope`
stuff (declaring phantoms & locals).
Change-Id: Id3b84e79032b8fbb12138b719e657565355fbc79
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6616
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This trait can be used to convert most structures from rnix-parser
into a codemap::Span. It uses a macro to implement the trait for the
various expression types in the rnix AST, as Rust's silly semantic
versioning restriction stops us from doing a blanket implementation.
This will be used in the next commit to clean up the span handling in
the compiler a bit.
Change-Id: I0a437034e5fa203b5a49c6f25c45932a9f3b2bca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6615
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
... and emit a warning if anyone decides to use.
Change-Id: Iaa6fe9fa932340e6d0fa9f357155e78823702576
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6611
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Yep.
This is kind of ugly right now. The idea is that the recursive_scope
compilation function is used for recursive sets as well by emitting
the keys. The rest of the logic is pretty much identical.
There is quite a lot of code here that can be cleaned up (duplication
between attrs and let, duplication inside of the recursive scope
compilation function etc.), but I'd like to get it working first and
then make it nice.
Note that nested keys are *not* supported yet.
Change-Id: I45c7cdd5f0e1d35fd94797093904740af3a97134
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6610
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type is used in the list temporarily populated by the *second*
pass over all identifiers in a recursive scope. This first pass only
serves to make all bindings known to the compiler, without populating
their values yet.
Having a type here is going to be useful once we implement `rec`,
which needs to thread through slightly more information.
Change-Id: Ie33e0f096c5fcb6c864c991255466748b6f0d1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6609
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This needs to be reused between let & `rec` attrs.
Change-Id: I4a3bb90af4be32771b0f9e405c19370e105c0fef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6608
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes the phases of attribute set construction that Nix has very
explicit (inherits, static keys, dynamic keys).
This change focuses on the split between dynamic/static keys by
collecting all dynamic ones while compiling the static ones, and then
phasing them in afterwards. It's possible we also need to do some
additional splitting inside of the inherits.
Change-Id: Icae782e2a5c106e3ce0831dda47ed81c923c0a42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6530
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This function is necessary for all builtins that expect some form of
path as an argument. It is merely a wrapper around coerce_to_string that
can shortcut if we already have a path. The absolute path check is done
in the same way as in C++ Nix for compatibility, although it should
probably be revised in the long term (think about Windows, for example).
Since coercing to a path is not an operation possible in the language
directly, this function can live in the builtins module as the only
place it is required.
Change-Id: I69ed5455c00d193fea88b8fa83e28907a761cab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6574
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Define `.len()` method on `NixAttrs` to preallocate the capacity of the result
vector.
Also anchor an errant comment to its context (I think).
Change-Id: I268f15025d453d7b3ae1146558c80e51433dd2a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6546
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
This allows us to get rid of the count local variable which was a bit
confusing. Calling parts.len() multiple times is fine, since the length
doesn't need to be computed.
Change-Id: I4f626729ad1bf23a93cb701385c3f4b50c57456d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6584
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
With this puzzle piece of string compilation in place, `compile_str`
becomes less redundant, as every part now needs to be compiled the same.
The thunking logic becomes a bit trickier, since we need to thunk even
in the case of `count == 1` if the single part is interpolating.
Splitting the inner (shared) code in a separate function turned out to
be easier for making rustc content.
Change-Id: I6a554ca599926ae5907d7acffce349c9616f568f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6582
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
If we have multiple string parts, we need to thunk assembling the
string. If we have a single literal, it is strict (like all literals),
but a single interpolation part may compile to a thunk, depending on how
the expression inside is compiled – we can avoid forcing to early here
compared to the previous behavior.
Note that this CL retains the bug that `"${x}"` is erroneously
translated to `x`, implying e.g. `"${12}" == 12`.
The use of `parts.len()` is unproblematic, since normalized_parts()
builds a `Vec` instead of returning an iterator.
Change-Id: I3aecbfefef65cc627b1b8a65be27cbaeada3582b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6580
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Implement C++ Nix's `EvalState::coerceToString` minus some of the Path
/ store handling. This is currently only used for `toString` which does
all possible coercions, but we've already prepared the weaker coercion
variant which is e.g. used for builtins that expect string arguments.
`EvalState::coerceToPath` is still missing for builtins that need a
path, but it'll be easy to build on top of this.
Change-Id: I78d15576b18921791d04b6b1e964b951fdef22c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6571
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
OpAttrsIsSet and OpAttrsTrySelect will fail silently if the attribute
set value on the stack is actually a thunk, so we need to make sure to
force at every step of the way.
Emitting the force instructions in the compiler because it is easier to
add, but maybe the VM should do this when handling the relevant opcodes?
Comments welcome.
Change-Id: I65c5ef348d59b2d07c9bb06abb24f9f3e6a0fdb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6540
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This prevents Nix programs to observe the "internal" type of thunks.
Possibly .type_of() is also an area of the runtime where we should panic
if "internal" would ever be returned.
Change-Id: I9f358044c48ad64896fb6a1b1a42f00a29efac00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6539
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The expression inside ${…} may return arbitrary values, including
thunks, so we need to make sure to force them just in case.
Change-Id: Ic11ba00c4c92a10a83becd91233db5f57f6e59c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6541
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Avoids accidentally dropping one on the floor if we add more, pointed
out by sterni in cl/6372
Change-Id: Ib7bb0ce9c8331c8337003d20c4d5240dfae1c32a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6570
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6370
Change-Id: I324d8049a2702ced8f30ad43a64d63ae79dd0eab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6569
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6389
Change-Id: I648056a760266a8cfd7adcdc478c7ff2132991f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6568
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Pointed out by sterni in cl/6395
Change-Id: I2dda2bb11fef702df05fd7a4fd93b9e717a85dad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6567
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is more useful than pointing it at the entire assert expression,
as that includes the body as well which is not going to be relevant in
the error.
Pointed out by sterni in cl/6391
Change-Id: I95a5d1edf90df65e7fa53d4d04502afd6e99e89a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6566
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is no longer required, resolution is now more sane. Pointed out
by sterni in cl/6422.
Change-Id: Icc8983c648f864e66813948df6e2d4bad6a7f312
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6565
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This field no longer needs to be directly accessible by the compiler.
Addresses a sterni lint from cl/6466
Change-Id: I5e6791943d7f0ab3d9b7a30bb1654c4a6a435b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6564
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As suggested by sterni in cl/6453.
Change-Id: I3cf80d97c11fd7d085ab510f6be4b5f937c791ec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6562
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This very closely follows the way it's done for warnings, but errors
have a lot more information available in some cases which we do not
surface yet.
Note also that due to requiring the `CodeMap`, this is not yet called
from eval.rs as the way that is threaded through needs to be
refactored, so only the method for reporting these errors as strings
is implemented so far.
Next steps for this will be to add a generic diagnostics module that
reduces some of the boilerplate for this between warnings & errors,
and which will also give us a good point in the future to switch to a
fancier diagnostics crate.
Change-Id: If6bb209f8e7a568d866e516a90335b9b2afbf66d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6534
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This implements an initial fancy display for warnings emitted by the
tvix compiler, using the codemap_diagnostic crate.
Each warning variant has an associated message, and optionally an
associated annotation for the span displayed to the user.
In theory we could get a lot more fancy with the display for specific
variants if needed (e.g. re-parse the AST and actually add multiple
semantic spans based on context), but this is already a good start.
Example:
tvix-repl> let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
warning[W004]: declared variable 'toString' shadows a built-in global!
--> [tvix-repl]:1:5
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^ variable declared here
warning[W001]: URL literal syntax is deprecated, use a quoted string instead
--> [tvix-repl]:1:16
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^^^^^^^^
warning[W002]: inherited variable already exists with the same value
--> [tvix-repl]:1:40
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^^^^^^^^^^
warning[W999]: feature not yet implemented in tvix: recursive attribute sets
--> [tvix-repl]:1:70
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^
warning[W999]: feature not yet implemented in tvix: closed formals
--> [tvix-repl]:1:62
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^
warning[W003]: variable 'toString' is declared, but never used:
--> [tvix-repl]:1:5
|
1 | let toString = https://tvl.fyi; in let inherit toString; in ({}: 42) rec {}
| ^^^^^^^^ variable declared here
=> 42 :: int
These are coloured when output to a terminal.
Change-Id: If315648a07e333895db4ae1d0915ee2013806585
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6532
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
This is a crate for source-span based error reporting. Since all of
our spans are already codemap spans, it is a good starting point.
We have to figure out quite a bit of logic for neat error printing;
later on if we want fancier presentation we might want to look at one
of the other libraries in this space like miette.
Change-Id: I4e28886af1ed199b7112d9dbf063c9f29b612bf1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6531
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
It is impossible for tvixbolt to recover from panics, so the user
experience of typing an expression using an unsupported feature was
that it would get sad and stop responding to input.
Instead, raise a normal value-level error of a new variant and
continue where possible.
Change-Id: Ibe016c92cacb87b85095c0f83758eddc6468053e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6528
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is used to drop an already emitted operation from a chunk again
and clean up its span tracking. This is required in cases where the
compiler has to backtrack.
Change-Id: I8112da9427688bb2dec96a2ddd12390f6e9734c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6499
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Refactors the methods used for determining whether an identifier in a
binding (i.e. an `rnix::Attr` node) is a static string, and extracting
it.
Previously all uses of this logic were for `let`-expressions, where
dynamic attributes are always an error. However, we need the same
logic to properly implement the phase separation of attribute set
compilation.
To facilitate this, the actual core logic of these methods now return
`Option`, and are only converted to errors in cases where the errors
are actually required.
Change-Id: Iad7826eff2cb428182521c6f92276310edeae1eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6498
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There's about to be a lot more code for attrsets (hopefully
temporarily as part of an expand&contract cycle), while nested
attribute logic is being refactored in preparation for recursive
attribute sets.
This does not change any functionality.
Change-Id: I667565cd810ca7d9046120d1721c2ceb9095550b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6497
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We need to make sure that we compile all plain inherits in a let
expression before declaring any other locals. Plain inherits are special
in the sense that they can never be recursive, instead resolving to a
higher scope. Thus we need to compile their value, before declaring
them. If we don't do that, before any other local can be declared,
we cause a situation where the plain inherits' values are placed into
other locals' stack slots.
Note that we can't integrate the plain inherit compilation into the
regular 2-3 phase model where we defer the compilation of the value or
we'd compile `let inherit x; in …` as `let x = x; in …`.
Change-Id: I951d5df3c9661a054e12401546875f4685b5bf08
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6496
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
This test shows that let bindings' dependencies can form a cyclical
graph, so we need to use thunking to break this cycle.
Change-Id: I2a4de71fd7024f3d3d1166154784139a82f39411
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6495
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
As the new test case demonstrates, asserts need to be evaluated lazily.
Change-Id: I808046722c5a504e9497855ca5026d255c7a4c34
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6494
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
The recent change that split declaration of let based locals and the
compilation of their values did not touch locals bound by inherit in
let. These were previously declared and compiled immediately before
starting to work on the other locals introduced in a let.
In the case of plain inherits, this behavior is kept in this change,
because there's nothing wrong with it: The value of a plain inherit will
always resolve to a higher scope, either statically or dynamically.
Since inherit (from) expression might refer to other locals bound in the
same let, we need to handle them in the same three steps as ordinary let
based locals:
1. We need to declare the (uninitialised) locals.
2. We need to compile the expression that obtains their value. For this,
we create a new thunk, since the from expression may very well return
a thunk which we need to force before selecting the value we are
interested in.
3. Thunks need to be finalised.
For 1., we create an extra pass over the inherits that already declares
and initialises plain inherits and notes inherit (from) expressions in
the entries vector after declaring them. 2. only needs a bit of adapting
to create the thunks for selecting if appropriate, the rest of the
existing code can be reused.
Change-Id: Ie4ac1c0f9ffcbf7c07c452036aa8e577443af773
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6490
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
With this all other "weird scope" logic starts working for `with` as
well.
Change-Id: I0ea1d8c5fbd9cec5084bd574224f77b71ff2b487
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6487
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This completely rewrites the handling of "dynamic upvalues" to,
instead of resolving them at thunk/closure instantiation time (which
forces some values too early), capture the entire with stack of parent
contexts if it exists.
There are a couple of things in here that could be written more
efficiently, but I'm first working through this to get to a bug
related to with + recursion and the code complexity of some of the
optimisations is distracting.
Change-Id: Ia538e06c9146e3bf8decb9adf02dd726d2c651cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6486
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This struct will be responsible for tracking upvalues (and is a
convenient place to introduce optimisations for reducing value clones)
instead of a plain value vector.
The main motivation for this is that the upvalues will have to capture
the `with`-stack fully and I want to avoid duplicating the logic for
this between the two capturing types.
Change-Id: I6654f8739fc2e04ca046e6667d4a015f51724e99
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6485
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Instead of the reference to the Rc, print the address of the Rc
itself.
Change-Id: I4560598924db7d2864d5c4ae9af847aee2ea7eff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6471
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Similarly to attribute sets, list elements can be arbitrary
expressions and their (temporary) stack slots during construction must
be accounted for by the compiler.
Change-Id: I3b6f7927860627fd867c64d0cab9104fd636d4f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6470
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The temporaries left on the stack as operands to `OpAttrs` must be
accounted for in the locals array in order for operations within them
to receive correct slots.
Some test cases that were previously broken have been added.
Change-Id: Ib52b629bbdf7931f63fd45a45af1073022da923c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6468
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
There are more upcomming uses of declare_phantom where this will come
in handy to avoid some code bloat.
Change-Id: I75cad8caf14511c519ab2f56e87e99bcbf0a082e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6467
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Moves the logic for removing tracked locals from a given scope from
the compiler's locals list, and leaves only the actual
compiler-related stuff (emitting warnings, cleaning up locals at
runtime) in the compiler itself.
Change-Id: I9da6eb54967f0a7775f624d602fe11be4c7ed5c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6466
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This will be re-used between the code paths for
recursive/non-recursive sets, and it might even be possible to unify
it with the logic for compiling `let inherit ...`.
Change-Id: I960a061048ac583a6e932e11ff6e642d9fc3093e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6464
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The comment explains how this works fairly well.
Note that this does not yet have the ability to check "closed
formals", i.e. without an ellipsis Tvix will *NOT* fail if unexpected
attribute set keys are provided.
Change-Id: I0d2b77e893243093d2789baa57f876d35d0a32ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6463
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
... even if the code is broken.
Change-Id: I5898bceaebf201b97e8988c94c90e7fafff82529
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6462
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As pointed out by sterni in cl/6205, this is actually possible in
syntactically valid expressions like
{ ${12 + 13} = 12; }
Change-Id: Id8a1e3aceb551f288f9050c4eea563eb6572f1a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6461
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As pointed out by grfn on cl/6091
Change-Id: I28308577b7cf99dffb4a4fd3cc8783eb9ab4d0d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6460
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
When the last instruction in a chunk is OpCall, make it an OpTailCall instead.
Change-Id: I2c80a06ee85e4abf545887b1a79b6d8b5e6123e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6458
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
If the last operation within a chunk is a function call, the call can
be executed in the same call frame without increasing the depth of the
call stack.
To enable this, a new OpTailCall instruction (similar to OpCall) is
introduced, but not yet emitted by the compiler.
Change-Id: I9ffbd7da6d2d6a8ec7a724646435dc6ee89712f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6457
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This introduces a macro to do the forcing, but this solution isn't
very nice and also does not work in all cases yet.
Change-Id: Icd18862ec47edb82c0efc3af5835a6cb6126f629
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6456
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This produces similar output to the previous tracing feature, but can
redirect the output somewhere else.
Change-Id: I9493c260f480904f3932cb74809b622c24d7be96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6453
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These methods make it possible to trace the runtime execution of the
VM through an observer.
Change-Id: I90e26853ba2fe44748613e7f761ed5c1c5fc9ff7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6452
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are required for tvixbolt to work. This interface is definitely
not stable yet, though.
Change-Id: I4076498e8f42311de74ee4f33c93a3ee0c5f8d3a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6450
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type implements an observer that is called whenever the compiler
emits a chunk (after the toplevel, thunks, or lambdas) and prints the
output of the disassembler to its internal writer.
This replaces half of the uses of the `disassembler` feature, which
has been removed from the Cargo configuration.
Note that at this commit runtime tracing is not yet implemented as an
observer.
Change-Id: I7894ca1ba445761aba4ad51d98e4a7b6445f1aea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6449
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This trait will enable library users of tvix-eval to observe internal
happenings of the compilation and runtime processes.
The initial methods of the observer will be called whenever the
compiler emits a chunk.
Change-Id: I668f6c2cfe3d6f4c1a1612c0f293831011768437
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6448
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is a step towards hiding the internal fields of thunk, and making
the interface of the type more predictable.
Part of the preparation for implementing observers.
Change-Id: I1a88a96419c72eb9e2332b56a2dd94afa47e6f88
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6447
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, it becomes possible to compile tvix-eval to
webassembly if the `repl` feature is disabled.
Change-Id: Icc0a059964cd0bea2054110c682d50fc5c87ec01
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6446
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this, most cases of `fix` in attribute sets will work correctly.
A simple test exercising both has been added.
Change-Id: I70fd431177bb6e48ecb33a87518b050c4c3d1c09
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6437
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
At the point where control flow exits Thunk::force (which may be due
to recursing), it is vital that there is no longer a borrow to the
inner thunk representation, otherwise this can cause accidental
infinite recursion (which will be detected, but cause failures on
valid code).
Change-Id: I2846f3142830ae3110a4f5d2299e9d7928634504
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6436
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it easier to track exactly which lambda is which when
inspecting e.g. the concrete representation of a thunk.
At runtime all lambdas live in an Rc. To make this print the right
address, the construction of these Rcs had to be moved up right to the
point where the lambda is first emitted (and disassembled).
Change-Id: I6070e6c8ac55f0bd697966c4e7c5565c20d19106
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6435
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
There can be different spans on the same line, so the previous
implementation would duplicate line numbers unnecessarily.
Change-Id: I8d8db77177aee0d834a6ec3584641e1bd5f31c3e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6434
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This was fixed by some of the previous commits around scopes. It's
somewhat similar to a few other tests, but I had this one failing
earlier and everything else succeeding, so it is useful to keep it
around for sure.
Change-Id: Ie6cf372b5c805daf992cd87aeb3dfe91542c381c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6431
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Deferred local upvalues can *only* occur at the same depth as the
thing that is closing over them, but there are various situations with
scope nesting where the actual stack indexes of the local and the
closer look like a deferred value is being accessed.
To fix this, simply compare the depth as well.
Change-Id: Ice77424cc87ab0a2c4f01379e68d4399a917b12b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6429
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is the same as `eval-okay-attrs-simple-inherit`.
Change-Id: I23878accc6cd62c16ec96601239838a385d31306
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6428
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The condition here was extremely hard to read prior to this change.
As the locals vector is now guaranteed to never be empty (there is
always at least a phantom for the current chunk's root expression),
the logic here can be simplified to just dropping tailing locals
entries while their depth matches that of the scope being closed.
Change-Id: I24973e23bc2ad25e62ece64ab4d8624e6e274c16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6427
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Similar to setting up a phantom slot when compiling the root value of
a file, closures and thunks need to have a phantom stack slot for the
root of the expression yielded by their thunk to make all accounting
work correctly.
The tricky thing here is that closures & thunks *escape* their inner
lambda context (that's the point!), so the functions emitting them
need to know both the *inner* slot (to resolve everything correctly
while compiling the slot) and the *outer* slot (to correctly emit
instructions for closing over upvalues).
Change-Id: I62ac58e2f639c4b9e09cc702bdbfd2373e985d7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6426
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of using a sentinel LocalIdx which potentially points to a
value in the locals stack that does not actually exist, set up an
initial uninitialised phantom value representing the result of the
root expression.
Change-Id: I82ea774daab83168020a3850bed57d35ab25c7df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6424
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
When deciding whether an upvalue needs to have a deferred resolution
step, the *stack* indexes should be compared - not the locals indexes.
The results are almost always the same, but there are tricky
situations where this can cause errors.
It's difficult to reproduce these errors in isolation, as they depend
on other scope behaviour, so this is one in a series of commits to
address the combination of issues which will gain some tests at the
end.
Change-Id: Iaa400b8d9500af58f493ab10e4f95022f3b5dd21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6423
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of using sentinel values and an additional bool, this tracks
the identifier of a local as an enum that is either a statically known
name, or a phantom.
To make this work correctly some more locals related logic has been
encapsulated in the `scope` module, which is a good thing (that's the
goal).
Phantom values are now not initialised by default, but the only
current call site of phantoms (`with` expression compilation) performs
the initialisation right away.
This commit changes no actual functionality right now, but paves the
way for fixing an issue related to `let` bodies.
Change-Id: I679f93a59a4daeacfe40f4012263cfb7bc05034e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6421
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The slot is now always known (at the root of the file it is simply
stack slot 0 once the scope drops back down to 0), so it does not need
to be wrapped in an `Option` and accessed in cumbersome ways anymore.
Change-Id: I46bf67a4cf5cb96e4874dffd0e3fb07c551d44f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6420
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change the runtime trace contains much more exact
information about the context of the computation (entering/exiting
calls etc.)
This is in large part due to moving the tracer to be a field on the VM
itself, which enables consistent ordering of traces across the
execution, and tracing an execution with its *input* instead
of *output* stack.
Change-Id: Ibe525e6e7d869756501e52bef1a441619ce7332c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6419
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it much easier to figure out what happened while debugging
this sort of thing.
Change-Id: I2e0e8096709adc647d63c04f213c547c415e5f44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6418
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This could occur when the disassembler is enabled and tracing the
runtime while a thunk is being evaluated, as it would not be possible
for the *tracer* to borrow the thunk at this exact moment.
However, we know that if the borrowing fails here we are dealing with
a not-fully evaluated thunk (blackhole), which should just print the
internal representation.
Change-Id: I4bdb4f17818d55795368e3d28842048f488f0a91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6416
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, "calling" (setting up the VM run loop for executing a call
frame) and "running" (running this loop to completion) were separate
operations.
This was basically an attempt to avoid nesting `VM::run` invocations.
However, doing things this way introduced some tricky bugs for exiting
out of the call frames of thunks vs. builtins & closures.
For now, we unify the two operations and always return the value to
the caller directly. For now this makes calls a little less effective,
but it gives us a chance to nail down some other strange behaviours
and then re-optimise this afterwards.
To make sure we tackle this again further down I've added it to the
list of known possible optimisations.
Change-Id: I96828ab6a628136e0bac1bf03555faa4e6b74ece
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6415
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If the disassembler feature is enabled, make sure that an Rc of the
codemap is available through the chunk.
Change-Id: I700f27ab665a704f73457b19bd2d7efc93828a16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6414
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The casting methods of `Value` are pretty verbose, and actually
incorrect before this commit as they did not account for inner thunk
values.
To address this, we first attempt to make them correct by introducing
a standard macro to generate them and traverse the inner thunk(s) if
necessary.
This is likely to be a performance hit as it will now involve more
cloning of values. We can do multiple things to alleviate this, but
should do some measurements first.
Change-Id: If315d6e2afe7b69db727df535bc6cbfb89a691aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6412
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it possible for builtins to force values on their own,
without the VM having to apply a strictness mask to the arguments
first.
Change-Id: Ib49a94e56ca2a8d515c39647381ab55a727766e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6411
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Scope poisoning must be inherited across lambda context boundaries,
e.g. if an outer scope has a poisoned `null`, any lambdas defined on
the same level must reference that poisoned identifier correctly.
Change-Id: I1aac64e1c048a6f3bacadb6d78ed295fa439e8b4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6410
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this, if an error occurs while forcing a thunk (which is very
likely) it is threaded through to the top by wrapping it in the
ErrorKind::ThunkForce variant.
We could use this to generate "stacktrace-like" error output if we
wanted, or simply jump through and discard everything except the
innermost error.
Change-Id: I3c1c8708c2f73ae062815adf490ce935b1979da8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6409
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously error spans were optional because the information about
code spans was not available at runtime. Now that this information has
been added, the error type will always carry a span.
This change is very invasive all throughout the codebase. This is due
to the fact that many functions that are called *by* the VM expected
to return `EvalResult`, but this no longer works as the span
information is not available to those functions - only to the VM
itself.
To work around this the majority of these functions have been changed
to return `Result<T, ErrorKind>` instead and an accompanying macro in
the VM constructs the "real" error.
Note that this implementatino currently has a bug where errors
occuring within thunks will yield the location at which the thunk was
forced, not the location at which the error occured within the code.
This will be fixed soon, but the commit is large enough as is.
Change-Id: Ib1ecb81a4d09d464a95ea7ea9e589f3bd08d5202
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6408
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Get the length of a list
Change-Id: I41d91e96d833269541a1b3c23b7cc879f96d1e5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6407
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
First pass at supporting `builtins` for tvix. The following tests appear to be
WAI:
```shell
$ cd tvix/eval
$ cargo build
$ cargo test
```
Change-Id: I27cce23d503b17a886d1109e285e8b4be4264977
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6405
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Another step towards being able to report accurate errors. The codemap
spans contain strictly more accessible information, as they now retain
information about which input file something came from.
This required some shuffling around in the compiler to thread all the
right information to the right places.
Change-Id: I18ccfb20f07b0c33e1c4f51ca00cd09f7b2d19c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6404
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As of this commit, the source spans of all emitted bytecode are fully
tracked.
Change-Id: I4c83deee0fc3f5e6fd6acad5a39047aec693b388
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6403
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These source spans will always point to the *value* that is being
forced, not the instruction that caused the force to be emitted. This
makes sense so that errors during forcing point at the value and not
the surrounding expression.
Change-Id: I4694414a3281a0de878f71634105b92148ec61f6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6402
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, the upvalue data instructions used by finalisers for
thunks and closures track the source span of the first identifier that
created the upvalue (if the same value is closed over multiple times
the upvalue will be reused, hence only the first one).
To do this the upvalue struct used by the compiler's scope now carries
an identifier node, which had to be threaded through quite a few
places.
Change-Id: I15a5fcb4c8abbd48544a2325f297a5ad14ec06ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6400
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This separation makes it possible to annotate the upvalue itself with
the span that created it, which (due to upvalue reuse) is only the
first one for an instance of the given UpvalueKind.
Change-Id: I9a991da6a3e8d71a92f981314bed900bcf434d44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6399
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are again a bit tricky in terms of emitted errors. The main
error is that the condition is not a boolean, which means that the
jump inspecting the condition must derive from the condition itself to
return an error at the correct position.
For other parts of the expression, it is simply the node itself.
Change-Id: I72411630e5d57dfc199f4c3c48afe443fe966322
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6392
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This one is tricky, specifically the span used for the final jump. I
decided that it makes sense to use the attrpath node, as the final
jump is the one that jumps *over* the default value, so the effect of
this is more closely related to the selector than the default.
It might be more correct to pass through the `or` token itself and
point to this for the jumps, but it depends a bit on what shape of
errors we could end up producing from this.
Change-Id: I29fbc97ba6b9e14e1a0e5f3a7759ddc299dd9c0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6390
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These are not actually used yet; this is in preparation for a
multi-commit chain for emitting all the right spans in the right
locations.
Change-Id: Ie99d6add2696c1cc0acb9ab928917a10237159de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6379
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This instantiates a codemap outside of the compiler and passes a
reference to the file currently under compilation to it. Note that the
"file" might just be a REPL line.
Change-Id: I131ae1ddb6d718e1374750da9ba0b99608c6058d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6378
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is currently just a wrapper around Chunk::push_op, but will gain
the span resolution logic in a moment.
Change-Id: I862bf9ecff0932f8da6708401ea044b9442c5d5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6377
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
