Replace the loop manually driving the iterator with a for … in, and some
of the match with ok_or_else.
Change-Id: I6d7b3ef1bf1c7aa128bd6adef09390b54f79479e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11632
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
… in Cargo.toml.
This gets an imperative `cargo clippy` run to pick up that config,
so `-A clippy::blocks_in_conditions` doesn't need to be explicitly
specified anymore.
Change-Id: I32b6cc50c77c22cba0d816d0db508c2f94b2c383
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11659
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
The pool library would always take out the most recently used perl
resource again, and since that is the one that we just spawned, we’d
be back at square one. Instead, we try to find an older one (or up to
200ms old) and use that instead, because that should be the one with
the fastest response time.
Okay, that was enough bullshit lol.
Change-Id: I6b999e682d02ab03206a9d1b707edf16daa04a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11657
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Instead of opening a separate span, we just add events for start and
end of formatting.
Change-Id: I26f6792dfdcd23c01cff415fa0f436d6a22d93fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11655
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
It does chip of the init overhead of like 50–100ms, even though the
formatting still takes quite some time (up to 200ms for more complex
expressions).
Maybe we need some simplistic formatter in the future that just splits
on parens? It’s not an easy problem …
Change-Id: I2ce951e6b3c2dc56294b1bdab913480727b50f0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11654
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
When showing the best torrents table, we want to be able to filter for
“only downloaded”.
Change-Id: Ibfe9212f3d422d305f858fbef023ee985c1183d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11650
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
The pretty renderer would add extra newlines, making the html
different.
Change-Id: I28496cbec61d4c9c63f657a499a1990f891949ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11639
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Might have made a mistake when refactoring the cabal file.
Change-Id: Ic45ac9bf0272784ef77a2dfcc59ce2dbd421113c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11637
Autosubmit: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Add instrumentation to the get() and put() implementations of all
PathInfoService.
Use the nixbase32 representation of the digest, not the base64 one.
Change-Id: Iea79bbd363bf20f23985e877c6fc1793bbee6a7e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11630
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We don't produce these erorrs anymore, no need to provide a conversion
to it.
Change-Id: I37933e436ad15c5d90b3ac270c4ef5742980513d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11614
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We don't want to block here, and this also means there's no poisoning to
deal with.
Change-Id: Ic375571970c48beace0005ae2c012135086a4d67
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11613
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This one doesn't require us to deal with poisoning, is upgradeable and
the right thing to use when locking access to data, not IO resources.
Change-Id: I78634953a73404500d28f51f1d93a87e215c8149
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11612
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We don't want to use the std::sync::RwLock here, as it blocks.
This also means we don't need to deal with the error cases anymore.
The list() implementation is updated to use try_stream, which means we
can now avoid collecting everything into a Vec before returning from it.
Change-Id: I9057dcc410dc553e6b1be3f20d5ee830569e8218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11611
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
nix_oracle is quite misleading, and fooled me into thinking this
validates all .exp files in the repo to match Nix output (which it
doesn't, that's done by verify-lang-tests).
Also, the whole test suite structure thing can use a bit more
explanation.
Change-Id: I2fadcc871843143270ad2ed9ac98de8287280e6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11609
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Get rid of the RUSTSEC warnings.
Also upgrade tokio to drop the Sized requirement, similar to cl/11608.
Change-Id: Idc6fece23c79eb30fd1dfc5fe64fa2e4c08cd412
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11624
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This provides an implementation of PathInfoService storing PathInfo in
memory up to a certain capacity, then evicting these that have been used
the least recently.
Change-Id: I9d738687caf4f181a957f72245f26b92832313cd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11622
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
These are not used anymore.
Change-Id: I9c348391c9600e9319f171faf3eda7175ebf7076
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11621
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These are not used anymore.
Change-Id: I6c16b4d80ddaabcb75fec3ea3e32b923b7719485
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11620
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This shouldn't be part of the PathInfoService trait.
Pretty much none of the PathInfoServices do implement it, and requiring
them to implement it means they also cannot make use of this calculation
already being done by other PathInfoServices.
Move it out into its own NarCalculationService trait, defined somewhere
at tvix_store::nar, and have everyone who wants to trigger nar
calculation use nar_calculation_service directly, which now is an
additional field in TvixStoreIO for example.
It being moved outside the PathInfoService trait doesn't prohibit
specific implementations to implement it (like the GRPC client for the
`PathInfoService` does.
This is currently wired together in a bit of a hacky fashion - as of
now, everything uses the naive implementation that traverses blob and
directoryservice, rather than composing it properly. I want to leave
that up to a later CL, dealing with other parts of store composition
too.
Change-Id: I18d07ea4301d4a07651b8218bc5fe95e4e307208
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11619
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This does IO, which might take a longer amount of time than what we want
to be blocking the normal executor.
Use spawn_blocking instead. I didn't add it for the constructors, as we
only call these once.
Change-Id: I9a1063099bac9582ca9681043c58c1edc780c5ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11618
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This does IO, which might take a longer amount of time than what we want
to be blocking the normal executor.
Use spawn_blocking instead. I didn't add it for the constructors, as we
only call these once.
Change-Id: I96231fcff8d10abe90cafde25a099a2db6ea9414
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11617
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This never did any chunking, and sled (rightfully) performs really bad
if values get too large.
We switched the default to using the objectstore backend with the local
filesystem a while ago, no need to keep this footgun around anymore.
Change-Id: I2c12672f2ea6a22e40d0cbf9161560baddd73d4a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11616
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We already have the same code in make_grpc_path_info_service_client.
Change-Id: Ibcd60831af8a061a2c3bb2f960f52a43d06cf6fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11615
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
`qmk flash` disappeared from the `qmk` command itself.
See `qmk_cli/script_qmk.py`:
```
This program can be run from anywhere, with or without a qmk_firmware
repository. If a qmk_firmware repository can be located we will use that
to augment our available subcommands.
```
By pointing QMK_HOME to our firmware sources, we can make it re-appear.
Change-Id: I5348fff546e864773063fb1f712bf2abd198972e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11627
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: flokli <flokli@flokli.de>
This specifically allows subsequent fetch calls in the REPL to avoid
fetching the same path twice (because they share the same
PathInfoService).
Change-Id: Ieda089080174913a8c014f13d6852cac599a7e17
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11484
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
We reuse the prev_name allocation for Entry, instead of allocating and
returning a separate Vec.
We encode the `prev_name: None` case as an empty vector, since we don't
allow empty names anyway, and the sorting is equivalent.
Change-Id: I975b37ff873805f5ff099bc82128706891052247
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11607
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
For small bytestrings (like NAR names), we can read into a preallocated
fixed-size buffer, instead of allocating a Vec every time.
Change-Id: Id8da9e9cea99c814361230c0ec02606b731c79a3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11606
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Adds a FieldSet type which defines which parts of a timestamp to merge into
another in a new `mergeTime` function.
With this two timestamps can be merged granularly, enabling more queries like
`Sep 03 18:00` to return useful results (e.g., in this case, in the current year
and location).
Change-Id: I8db161608c5f68c8f9c61de8c6fa46067eced39b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11601
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Before getting clever about durations & stuff, try to parse the whole thing at
once. This is useful for plain timestamps that contain spaces, like `2024-01-01
15:00:01` for example.
Change-Id: I50b0ee8488c153b4e6db75abaea409d55c0b92d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11600
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
