After ingestion of the contents into the store, this will use the
NonCachingNARCalculationService to create a NAR stream or the contents
of the path, and use our Derivation output path calculation machinery to
determine the output path (using recursive hashing strategy).
In a real-world scenario, we obviously want to cache these calculations,
but this should be sufficient to tinker around with it.
Change-Id: I9b2e69384414f0be1bdcb5a99a4bfd46e8db9932
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8317
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Emits the span of the `set` that is being accessed in the `force`
operation of an attribute access.
Looking at traces, it's a lot more useful to get information about
*what* is being forced, as in cases like `foo.bar` it can be
misleading to have an error highlight `bar`, when the error occured
while forcing `foo` to be able to access `bar` in the first place.
Change-Id: Id46ff28f20c67cb4971727ac52cc4811795cea2d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8272
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This reports the span
1. of the code within a thunk,
2. of the place where the thunk was instantiated,
3. of the place where the thunk was first forced,
4. of the place where the thunk was forced again,
when yielding an infinite recursion error, which hopefully makes it
easier to debug them.
The spans are tracked in the ThunkRepr::Blackhole variant when putting
a thunk under evaluation.
Note that we currently have some loss of span precision in the VM loop
when switching between frame types, so spans 3/4 are currently a bit
wonky. Working on it.
Change-Id: Icbd2a9df903d00e8c2545b3fc46dcd2a9e3e3e55
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8270
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This is step 1 towards being able to use all 4 spans that we know when
dealing with infinite recursion. It tracks the span at which the
force of a thunk was first requested when constructing a blackhole, so
that we can highlight the spans of the first and second forces.
These are actually the least relevant spans, but the easiest to put in
place, more coming soon.
Change-Id: I4c7e82f6211b98756439d4148a4191457cc46807
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8269
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This produces traces in which we can see what kind of native code was
run. Note that these "names" are named after the generator message, so
these aren't *really* intended for end-user consumption, but we can
give them saner names later.
Example:
https://gist.github.com/tazjin/82b24e92ace8e821008954867ee05057
This already makes the traces a little easier to parse.
Change-Id: Idcd601baf84f492211b732ea0f04b377112e10d0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8268
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
When emitting an error at runtime, the VM will now use the new
`NativeError` and `BytecodeError` error kinds (which just wrap inner
errors) to create a set of diagnostics to emit.
The primary diagnostic is emitted last, with `error` type (so it will
be coloured red in terminals), the other ones will be emitted with
`note` type, highlighting the causal chain.
Example:
https://gist.github.com/tazjin/25feba7d211702453c9ebd5f8fd378e4
This is currently quite verbose, and we can cut down on this further,
but the purpose of this commit is to surface more information first of
all before worrying about the exact display.
Change-Id: I058104a178c37031c0db6b4b3e4f4170cf76087d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8266
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This actually uses coercion under the hood in C++ Nix. See the test
for an example.
Change-Id: Id56b364acf269225b6829d0b600e0222f8b3608d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8322
Reviewed-by: andi <andi@notmuch.email>
Tested-by: BuildkiteCI
This was commented out and forgotten during the generator refactor, oh
well.
Change-Id: I474b685159a955a846db462da0dd0067af177b04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8321
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Passing in a &proto::node::Node into all this allows us consumers to
keep ownership of the proto::node::Node.
Change-Id: I44882a86c46826b06a8a8a0b24c18adfc7052662
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8316
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
The behaviour of this function is a bit unintuitive, and cl/8310 already
inlined the other consumer of it.
Rewrite the last consumer of the function, so we can drop it.
Change-Id: I59c8486037ce3f777667d1d9e4f4a9316d5a0cb9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8311
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of having two very similar match branches for the FOD and non-
FOD case, detect the FOD case while looping over all outputs.
In the case of anything other than recursive sha256 FODs, the
fingerprint and output path calculation is exactly the same.
Change-Id: Ieb6995653d008766e595cf29d7cd4fb1334e33dd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8310
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Walking the arguments might encounter an `outputs` output, which might
explicitly (for whatever reason) specify the `out` output.
To prevent dropping FOD settings in this case, we have to populate
that part of the configuration after walking the other attributes.
Change-Id: Iee6a7f0a71e9c9699e79d35e6cb19e1ddb49395d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8312
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This stops using our own custom Hash structure, which was mostly only
used because we had to parse the JSON representation somehow.
Since cl/8217, there's a `NixHash` struct, which is better suited to
hold this data. Converting the format requires a bit of serde labor
though, but that only really matters when interacting with JSON
representations (which we mostly don't).
Change-Id: Idc5ee511e36e6726c71f66face8300a441b0bf4c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8304
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Apparently, having multiple packages with the same path is a bad thing:
```
The bin target `tvix-store` in package `tvix-store-bin v0.1.0 (/home/flokli/tvl/tvix/store)` has the same output filename as the lib target `tvix_store` in package `tvix-store-bin v0.1.0 (/home/flokli/tvl/tvix/store)`.
Colliding filename is: /home/flokli/tvl/tvix/target/doc/tvix_store/index.html
The output filenames should be unique.
This is a known bug where multiple crates with the same name use
the same path; see <https://github.com/rust-lang/cargo/issues/6313>.
```
Change-Id: Ic785c0349070783baf5e8fd23f5fb60603a3c995
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8308
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
There's still some shadowing going on, but that's left for a followup
CL.
Change-Id: I02992f1eb494faca99857a3a5ee4dcd47f1b9fd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8306
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This will be published on docs.tvix.dev
Change-Id: I348e057351d5295ad20953c9e9a32c257abab089
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8298
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The website itself contains no useful information that we don't
already have published anywhere, but it's a decent landing place.
Mostly I want to have something on the root of tvix.dev, so that we
can start using it for other purposes.
Change-Id: Id2b4dabc7f6e4dd26b61484b86dbde2f39aa1719
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8296
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This only trims the output paths from a Derivation struct, not the
output hashes.
Change-Id: I9250fec4602ed05bb64540c4a89ddb6fb052be1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8303
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Call this function derivation_or_fod_hash, and return a NixHash.
This is more in line with how cppnix calls this, and allows using
to_nix_hash_string() in some places.
Change-Id: Iebf5355f08ed5c9a044844739350f829f874f0ce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8293
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Change-Id: I8224bf039f739c401900b5a2ddc839810c87cf6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8226
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
We settled on this being the most reasonable name for this construct.
Change-Id: Ic31c45461a842f22aa05f4446123fe3a61dfdbc0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8291
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Given Rust's current lack of support for tail calls, we cannot avoid
using `async` for builtins. This is the only way to avoid
overflowing the cpu stack when we have arbitrarily deep
builtin/interpreted/builtin/interpreted/... "sandwiches"
There are only five `async fn` functions which are not builtins
(some come in multiple "flavors"):
- add_values
- resolve_with
- force, final_deep_force
- nix_eq, nix_cmp_eq
- coerce_to_string
These can be written iteratively rather than recursively (and in
fact nix_eq used to be written that way!). I volunteer to rewrite
them. If written iteratively they would no longer need to be
`async`.
There are two motivations for limiting our reliance on `async` to
only the situation (builtins) where we have no other choice:
1. Performance.
We don't really have any good measurement of the performance hit
that the Box<dyn Future>s impose on us. Right now all of our
large (nixpkgs-eval) tests are swamped by the cost of other
things (e.g. fork()ing `nix-store`) so we can't really measure
it. Builtins tend to be expensive operations anyways
(regexp-matching, sorting, etc) that are likely to already cost
more than the `async` overhead.
2. Preserving the ability to switch to `musttail` calls.
Clang/LLVM recently got `musttail` (mandatory-elimination tail
calls). Rust has refused to add this mainly because WASM doesn't
support, but WASM `tail_call` has been implemented and was
recently moved to phase 4 (standardization). It is very likely
that Rust will get tail calls sometime in the next year; if it
does, we won't need async anymore. In the meantime, I'd like to
avoid adding any further reliance on `async` in places where it
wouldn't be straightforward to replace it with a tail call.
https://reviews.llvm.org/D99517https://github.com/WebAssembly/proposals/pull/157
https: //github.com/rust-lang/rfcs/issues/2691#issuecomment-1462152908
Change-Id: Id15945d5a92bf52c16d93456e3437f91d93bdc57
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8290
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: Adam Joseph <adam@westernsemico.com>
This commit moves fetch_forced_with and fetch_captured_with into the
scope of their only caller (resolve_with).
Change-Id: I9a8bc27228888729d591e8cb021c431b2b6468f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8289
Autosubmit: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This rewrites nix_cmp_ordering as an iterative loop, which
eliminates the extra pinned-boxing helper function.
Change-Id: I33d0ecc913e02affd8fd4c7bc1c9ecfdf4c7deb9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8288
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: Adam Joseph <adam@westernsemico.com>
* We no longer need backtrace-on-stack-overflow, as we no longer
overflow the stack with the recent eval refactorings. This was weird
voodoo anyways, introduced earlier to debug some cases where stack
overflows occured.
* default features of genawaiter crate are not needed, as we don't use
their proc macros
Change-Id: I346fc5a18d7f117ee805909a8be8f535b96be76c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8263
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This reorders the operations in the VM's main `match` statement while
evaluating bytecode according to the frequency with which these
operations appear in some nixpkgs evaluations.
I used raw data that looks like this:
https://gist.github.com/tazjin/63d0788a78eb8575b04defaad4ef610d
This has a small but noticeable impact on evaluation performance.
No operations have changed in any way, this is purely moving code
around.
Change-Id: Iaa4ef4f0577e98144e8905fec88149c41e8c315c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8262
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The name of this was not accurate anymore after all the recent
shuffling, as noted by amjoseph. Conceptual tail calls here only occur
for Nix bytecode calling Nix bytecode, but things like a builtin call
actually push a new native frame.
Change-Id: I1dea8c9663daf86482b8c7b5a23133254b5ca321
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8256
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
... except now the tests fail, but at least it works
Change-Id: I05e86c173f40533ae65548585c1ddaa200ac5235
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8214
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This file which ships with C++ Nix is required for evaluating nixpkgs.
Like C++ Nix, we now inject a pseudo path in EvalIO from which this
will resolve as <nix/fetchurl.nix>
Change-Id: Ic948c476a2cfc6381d5655d308bc2d5fa25b7123
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8213
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This drops the usage of serde::Serialize, as the trait can not be used
to implement the correct semantics (function colouring!).
Instead, a manual JSON serialisation function is written which
correctly handles toString, outPath and other similar weirdnesses.
Unexpectedly, the eval-okay-tojson test from the C++ Nix test suite
now passes, too.
This fixes an issue where serialising data structures containing
derivations to JSON would fail.
Change-Id: I5c39e3d8356ee93a07eda481410f88610f6dd9f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8209
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This adds static strings to generator frames that describe the
generator in a human-readable fashion, which are then logged in
observers.
This makes runtime traces very precise, explaining exactly what is
being requested from where.
Change-Id: I695659a6bd0b7b0bdee75bc8049651f62b150e0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8206
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
These are serialised as the serialisation of the value of that field.
Change-Id: Ida51708b1f43ce09b0ec835f4e265918aa31dd09
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8205
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
These must be serialised to a JSON string of the *result* of coercing
the function application to a string.
Change-Id: Ib7f49ccd950503ddbdbf99643cd59565e26b50da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8204
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
It turns out that this is used not just in coerceToString, but also in
toJSON.
Change-Id: I1c324b115a0b8bb6d83446d5bf70453c9b90685e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8203
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Do not print the entire value (they're likely to be thunks anyways).
This is useful because there *can* be cases where something like
`nixpkgs` itself is sent through one of these messages, in which case
the observer trying to print it will just blow up.
Change-Id: I1fa37ea071d75efa0eb3428c6e2fe4351c62be6b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8202
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Print only the top 6 values of the stack, not the entire stack.
There's very few operations that deal with more values anyways, so the
rest are not likely to be useful.
This gets us one step closer to tracing VERY large executions without
blowing up.
Change-Id: I97472321b0321b25d534d9f53b3aadfacc2318fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8201
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This can actually blow up when tracing arbitrary execution, as some of
the data structures just get too large to run through a tabwriter.
Change-Id: I6ec4c30ee48655b8a62954ca219107404fb2c256
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8200
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Formals can be initialised with deferred default values (see the test
cases), in which case they need an extra thunk to have something that
can be finalised appropriately when the setup is done.
Fixes: b/255
Change-Id: I380e3770be68eaa83ace96d450c7cead32dacc9f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8196
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This shaves another 8 bytes off Value. How did that type get so big?!
Change-Id: I65e9b59a1636bd57e3cc4aec5fea16887070b832
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8153
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
No longer needed, and in some cases caused some extra work.
Change-Id: I64e8e7292573bdc92a9c7a8e470e33f8c526f311
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8152
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Instead of the two different representations (which we don't really
use much), use a `Box<str>` (which potentially shaves another 8 bytes
off `Value`).
NixString values themselves are immutable anyways (which was a
guarantee we already had with `SmolStr`), so this doesn't change
anything else.
Change-Id: I1d8454c056c21ecb0aebc473cfb3ae06cd70dbb6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8151
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The size of a `Vector<Value>` is 64 *bytes*, which is quite large, and
it bloated the entire Value type to this size.
This change adds an indirection for the inner vector through Rc.
Initially I tried to use a Box, but this breaks pointer equality
guarantees for the Vector when it is small enough to be inlined.
This reduces the size of Value from 64 to 32 bytes.
Change-Id: Ic3211e861b1966c78b2c3d536ba291fea92647fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8150
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Warning: This is probably the biggest refactor in tvix-eval history,
so far.
This replaces all instances of trampolines and recursion during
evaluation of the VM loop with generators. A generator is an
asynchronous function that can be suspended to yield a message (in our
case, vm::generators::GeneratorRequest) and receive a
response (vm::generators::GeneratorResponsee).
The `genawaiter` crate provides an interpreter for generators that can
drive their execution and lets us move control flow between the VM and
suspended generators.
To do this, massive changes have occured basically everywhere in the
code. On a high-level:
1. The VM is now organised around a frame stack. A frame is either a
call frame (execution of Tvix bytecode) or a generator frame (a
running or suspended generator).
The VM has an outer loop that pops a frame off the frame stack, and
then enters an inner loop either driving the execution of the
bytecode or the execution of a generator.
Both types of frames have several branches that can result in the
frame re-enqueuing itself, and enqueuing some other work (in the
form of a different frame) on top of itself. The VM will eventually
resume the frame when everything "above" it has been suspended.
In this way, the VM's new frame stack takes over much of the work
that was previously achieved by recursion.
2. All methods previously taking a VM have been refactored into async
functions that instead emit/receive generator messages for
communication with the VM.
Notably, this includes *all* builtins.
This has had some other effects:
- Some test have been removed or commented out, either because they
tested code that was mostly already dead (nix_eq) or because they
now require generator scaffolding which we do not have in place for
tests (yet).
- Because generator functions are technically async (though no async
IO is involved), we lose the ability to use much of the Rust
standard library e.g. in builtins. This has led to many algorithms
being unrolled into iterative versions instead of iterator
combinations, and things like sorting had to be implemented from scratch.
- Many call sites that previously saw a `Result<..., ErrorKind>`
bubble up now only see the result value, as the error handling is
encapsulated within the generator loop.
This reduces number of places inside of builtin implementations
where error context can be attached to calls that can fail.
Currently what we gain in this tradeoff is significantly more
detailed span information (which we still need to bubble up, this
commit does not change the error display).
We'll need to do some analysis later of how useful the errors turn
out to be and potentially introduce some methods for attaching
context to a generator frame again.
This change is very difficult to do in stages, as it is very much an
"all or nothing" change that affects huge parts of the codebase. I've
tried to isolate changes that can be isolated into the parent CLs of
this one, but this change is still quite difficult to wrap one's mind
and I'm available to discuss it and explain things to any reviewer.
Fixes: b/238, b/237, b/251 and potentially others.
Change-Id: I39244163ff5bbecd169fe7b274df19262b515699
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8104
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Adds a `Value::neo_nix_eq` method (the `neo_` prefix will be dropped
when we flip over to the generator implementation of the VM) which
implements Nix equality semantics using async, generator-based
comparisons.
Instead of tracking the "kind" of equality that is being compared (see
the pointer-equality doc) through a pair of booleans, I've introduced
an enum that explicitly lists the possible comparisons.
Change-Id: I3354cc1470eeccb3000a5ae24f2418db1a7a2edc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8241
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
These functions will be used by the changes in the VM to observe the
runtime execution of generator frames, and provide a more linear view
of the execution of the Tvix VM.
Change-Id: I10b1b1933dedc065e7c61d5d6062f0aaeee0097e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8240
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
In order to implement an asynchronous builtins.sort (required for
moving builtins to generators), we need an `async` sorting algorithm
as our comparators involve invoking a Nix function.
This commit implements a fairly simple, optimised bubble sort as the
sorting algorithm used in our `async fn sort_by`.
There don't seem to be any crates providing async versions of things
like this, and they might actually be pretty hard to implement
generically due to some constraints about how `async` works.
Note that this algorithm is less efficient than the hybrid
"timsort/mergesort/insert sort" used in the Rust standard library. I
tried to write a merge sort implementation, but ran into isuses with
the sort becoming unstable because our comparators can not yield
equality. This is the simplest implementation which I know to be
correct.
Note that as of this commit this is *not* covered by the Tvix test
suite, but it will be as soon as the rest of the generator code lands.
Change-Id: Ia9a604f7dd941d6acc9212c902e0e637ed75bebc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8239
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
All code initially using this has been replaced by the simpler and more
performant implementation with StreamCDC and read_all_and_chunk.
Change-Id: I08889e9a6984de91c5debcf2b612cb68ae5072d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8265
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This was the last piece of code using BlobWriter.
We can also use `read_all_and_chunk`, it's just requires a bit more
plumbing:
- The data coming from the client (stream) needs to be mapped (we
extract the .data field).
- The stream needs to be turned into an (async) reader
- The reader needs to be made sync, and that code using the sync reader
needs to be in a `task::spawn_blocking`.
Change-Id: I4e374e1a9f47d5a0933f59a8f5c121185a5f3e95
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8260
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This moves the logic from src/import.rs that
- reads over the contents of a file
- chunks them up and uploads individual chunks
- keeps track of the uploaded chunks in a BlobMeta structure
- returns the hash of the blob and the BlobMeta structure
… into a generic read_all_and_chunk function in
src/chunkservice/util.rs.
It will work on anything implementing io::Read, not just files, which
will help us in a bit.
Change-Id: I53bf628114b73ee2e515bdae29974571ea2b6f6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8259
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Make use of the helper function here as well.
Change-Id: Ia0afd84eb3903bb897ee6aee884dc291f3e4371c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8258
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
When building tvix-store without default features, this variable doesn't
need to be mutable. Silence the warning.
Change-Id: Iec61be0064c0cef276a29ef22e5c4af3b052efe8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8267
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We currently send two warnings in case of detecting dead code - W008
inside compile_dead_code, and a more detailed warning in all places that
invoke compile_dead_code:
```
warning[W007]: useless operation on boolean: this expression is always false
--> /nix/store/qz3gjn95gazab4fkb7s8lm6hz17rdzzy-414z9nnj1wy66ymq6vgb693x9xjz6hf2-nixpkgs-src/pkgs/top-level/perl-packages.nix:12079:15
|
12079 | doCheck = false && !stdenv.isDarwin;
| ^^^^^^^^^^^^^^^^^^^^^^^^^
warning[W008]: this code will never be executed
--> /nix/store/qz3gjn95gazab4fkb7s8lm6hz17rdzzy-414z9nnj1wy66ymq6vgb693x9xjz6hf2-nixpkgs-src/pkgs/top-level/perl-packages.nix:12079:24
|
12079 | doCheck = false && !stdenv.isDarwin;
| ^^^^^^^^^^^^^^^^
```
The place invoking `compile_dead_code` has more context to why the code
is unused, so it's error message is much more useful.
Stop emitting the less informative warning inside compile_dead_code
(W008), and update the comment that we expect the caller to emit a
warning.
I kept W008 itself still around, in case we end up having places this
will get used again.
Change-Id: I2c5d84fc0cb4035872cd4b71cc3e9e34e120eb37
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8024
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This removes the use of Box::new, switching fastcdc to version 3.0.2
with https://github.com/nlfiedler/fastcdc-rs/issues/25 fixed.
Change-Id: I64f388b9e0a7f358e25a8bb7ca0e4df1d3bb01c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8249
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
We're using this in a bunch of places. Let's move it into a helper
function.
Change-Id: I118fba35f6d343704520ba37280e4ca52a61da44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8251
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is useful not only in blobwriter contexts.
Change-Id: I4c584b5264ff7b4bb3b1a9671affc39e18bf4ccf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8245
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This already is a &CS, so we don't need to clone().
Change-Id: I5397a5948ae7fe4781f18df760a79047f83dca01
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8243
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Look at the data that's written to us, and upload all chunks but the
rest in parallel, using rayon. This required moving `upload_chunk`
outside the struct, and accepting a ChunkService to use for upload
(which it was previously getting from `self.chunk_service`).
This doesn't speed up things too much for now, because things are still
mostly linear.
Change-Id: Id785b5705c3392214d2da1a5b6a182bcf5048c8d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8195
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
The Directory service does already reject inserting invalid (wrongly
sorted) Directory messages, but our test case didn't provoke it.
Change-Id: I228e201925e8999186659a2d8da0118db184d9ab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8167
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This exposes the previous default behavior at the `tvix-store daemon`
subcommand.
It also adds a `tvix-store import` command, which will ingest a given
path into the store.
Change-Id: Ide14f1d409b9364e7f98090690c744326486e470
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8166
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This provides a service using /dev/shm, that's deleted once the
reference is dropped.
Refactor all tests to use these, which allows getting rid of most
TempDir usage in the tests.
The only place where we still use TempDir is in the importer tests,
which work on a filesystem path.
Change-Id: I08a950aa774bf9b46d9f5c92edf5efba36053242
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8193
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
While we don't want to keep all of the data in memory, we want to
feed a reasonably-enough buffer to the chunking function, to prevent
unnecessarily trying to chunk over and over again.
Change-Id: I5bbe2d55e8c1c63f8f7ce343889d374b528b559e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8160
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This imports the contents at a given Path into the tvix store.
It doesn't register the contents at a Path in the store itself, that's up
to the PathInfoService.
Change-Id: I2c493532d65b90f199ddb7dfc90249f5c2957dee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8159
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This also uploaded HELLOWORLD_BLOB_CONTENTS before, but it's not
referred from anywhere in the fixture.
Change-Id: I823133afe0f08d18a59e2ac4e4d4bb7d34ce8a2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8158
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This allows hiding to tests what exact implementation we're using, when
testing things that do something with a store, but don't care what's
used for underlying storage.
Change-Id: I7cdf60fd73c25d5050159cb31ec177db2bc2a7f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8155
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This will moves the chunking-as-we-receive logic that so far only lived
in grpc_blobservice_wrapper.rs into a generic BlobWriter.
Change-Id: Ief7d1bda3c6280129f7139de3f6c4174be2ca6ea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8154
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Use the FastCDC::cut function to ask fastcd for cutting points as we
receive the data. Make sure to keep the last chunk in the temporary
buffer, as we might not actually cut at the end.
Also, use rayon to calculate the blake3 hash if the input data is
> 128KiB.
Change-Id: I6195f3b74eac5516965cb12d8d026aa720c8b891
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8135
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This switches away from the less canonical "ronomon" version to the
implementation as described in the
[paper](https://ieeexplore.ieee.org/document/9055082) by Wen Xia, et
al., in 2020.
That version uses 64-bit hash values and tends to be faster than both
the ronomon and v2016 versions, and produces the same chunking as the
2016 version.
As per https://docs.rs/fastcdc/latest/fastcdc/#implementations-1, it's
the recommended choice.
The crate also gained support for streaming version of chunkers:
https://docs.rs/fastcdc/latest/fastcdc/#large-data, which might be
useful.
Change-Id: Ieabec3da54eb2b73c045cb54e51f7a216f63641e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8134
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
