3643 lines
120 KiB
Text
3643 lines
120 KiB
Text
Thu Sep 22 00:12:42 BST 2022
|
||
|
||
Making quite reasonable progress, though only running under emulation.
|
||
Since almost everything so far has been a recap of nixwrt, that's to
|
||
be expected.
|
||
|
||
The example config starts some services at boot, or at least attempts
|
||
to. Next we shoud
|
||
|
||
- add some network config to run-qemu
|
||
- implement udhcp and odhcp properly to write outputs
|
||
and create resolv.conf and all that
|
||
- write some kind of test so we can refactor the crap
|
||
- not let the tests write random junk everywhere
|
||
|
||
Thu Sep 22 12:46:36 BST 2022
|
||
|
||
We can store outputs in the s6 scan directory, it seems:
|
||
|
||
> There is, however, a guarantee that s6-supervise will never touch subdirectories named data or env. So if you need to store user information in the service directory with the guarantee that it will never be mistaken for a configuration file, no matter the version of s6, you should store that information in the data or env subdirectories of the service directory.
|
||
|
||
https://skarnet.org/software/s6/servicedir.html
|
||
|
||
> process 'store/pj0b27l5728cypa5mmagz0q8ibzpik0h-execline-mips-unknown-linux-musl-2.9.0.1-bin/bin/execlineb' started with executable stack
|
||
|
||
https://skarnet.org/lists/skaware/1550.html
|
||
|
||
|
||
Thu Sep 22 16:14:49 BST 2022
|
||
|
||
what network peers do we want to model for testing?
|
||
|
||
- wan: pppoe
|
||
- wan: ip over ethernet, w/ dhcp service provided
|
||
- wan: l2tp over (ip over ethernet, w/ dhcp service provided)
|
||
- lan: something with a dhcp client
|
||
|
||
https://accel-ppp.readthedocs.io/en/latest/ could use this for testing
|
||
pppoe and l2tp?
|
||
|
||
|
||
Thu Sep 22 22:57:47 BST 2022
|
||
|
||
To build a nixos vm with accel-ppp installed (not yet configured)
|
||
|
||
nix-build '<nixpkgs/nixos>' -A vm -I nixos-config=./tests/ppp-server-configuration.nix -o ppp-server
|
||
QEMU_OPTS="-display none -serial mon:stdio -nographic" ./ppp-server/bin/run-nixos-vm
|
||
|
||
To test it's configured I thought I'd run it against an OpenWrt qemu
|
||
install, so, fun with qemu networking ensues. This config in ../openwrt-qemu
|
||
is using two multicast socket networks -
|
||
|
||
nix-shell -p qemu --run "./run.sh ./openwrt-22.03.0-x86-64-generic-kernel.bin openwrt-22.03.0-x86-64-generic-ext4-rootfs.img "
|
||
|
||
so hopefully we can spin up other VMs connected either to its lan or
|
||
its wan: *however* we do first need to configure its wan to use pppoe
|
||
|
||
uci set network.wan=interface
|
||
uci set network.wan.device='eth1'
|
||
uci set network.wan.proto='pppoe'
|
||
uci set network.wan.username='db123@a.1'
|
||
uci set network.wan.password='NotReallyTheSecret'
|
||
|
||
(it's ext4 so this will probably stick)
|
||
|
||
|
||
Fri Sep 23 10:27:22 BST 2022
|
||
|
||
* mcast=230.0.0.1:1234 : access (interconnect between router and isp)
|
||
* mcast=230.0.0.1:1235 : lan
|
||
* mcast=230.0.0.1:1236 : world (the internet)
|
||
|
||
|
||
Sun Sep 25 20:56:28 BST 2022
|
||
|
||
TODO - bugs, missing bits, other infelicities as they occur to me:
|
||
|
||
DONE 1) shutdown doesn't work as its using the busybox one not s6.
|
||
|
||
2) perhaps we shouldn't have process-based services like dhcp, ppp
|
||
implement "address provider interface" - instead have a separate
|
||
service for interface address that depends on the service and uses its
|
||
output
|
||
|
||
* ppp is not like dhcp because dhcp finds addresses for an existing
|
||
interface but ppp makes a new one
|
||
|
||
3) when I killed ppp it restarted, but I don't think it reran
|
||
defaultroute which is supposed to depend on it. (Might be important
|
||
e.g. if we'd been assigned a different IP address). Investigate
|
||
semantics of s6-rc service dependencies
|
||
|
||
DONE 4) make the pppoe test run unattended
|
||
|
||
5) write a test for udhcp
|
||
|
||
6) squashfs size is ~ 14MB for a configuration with not much in it,
|
||
look for obvious wastes of space
|
||
|
||
7) some of the pppoe config should be moved into a ppp service
|
||
|
||
8) some of configuration.nix (e.g. defining routes) should be moved into
|
||
tools
|
||
|
||
DONE 9) split tools up instead of having it all one file
|
||
|
||
10) is it OK to depend on squashfs pseudofiles if we might want to
|
||
switch to ubifs? will there always be a squashfs underneath? might
|
||
we want to change the pseudofiles in an overlay?
|
||
|
||
11) haven't done (overlayfs) overlays at all
|
||
|
||
12) overlay.nix needs splitting up
|
||
|
||
13) upgrade ppp to something with an ipv6-up-script option
|
||
|
||
14) add ipv6 support generally
|
||
|
||
15) "ip address add" seems to magically recognise v4 vs v6 but
|
||
is that specified or fluke?
|
||
|
||
16) tighten up the module specs. (DONE) services.foo should be a s6-rc
|
||
service, (DONE) kernel config should be checked in some way
|
||
|
||
DONE 17) rename nixwrt references in kernel builder
|
||
|
||
18) maybe stop suffixing all the service names with .service
|
||
|
||
19) syslogd - use busybox or s6?
|
||
|
||
chat -s -S ogin:--ogin: root / "ip address show dev ppp0 | grep ppp0" 192.168.100.1 "/nix/store/*-s6-linux-init-*/bin/s6-linux-init-hpr -p"
|
||
|
||
|
||
Working towards a general goal of having a derivation we can
|
||
usefully run `nix path-info` on - or some other tool that will
|
||
tell us what's making the images big. The squashfs doesn't
|
||
have this information.
|
||
|
||
Towards that end (really? can't remember how ...) what would be a
|
||
way for packages to declare "I want to add files to /etc"? Is that
|
||
even a good idea?
|
||
|
||
Thinking we should turn s6-init-files back into a real derivation.
|
||
|
||
Tue Sep 27 00:31:45 BST 2022
|
||
|
||
> Thinking we should turn s6-init-files back into a real derivation.
|
||
|
||
This turns out to be Not That Simple, because it contains weird shit
|
||
(sticky bits and fifos).
|
||
|
||
Tue Sep 27 09:50:44 BST 2022
|
||
|
||
* allow modules to register activation scripts that are run on the
|
||
root filesystem once all packages are installed
|
||
|
||
- do they run on build or on host? if we're upgrading in place
|
||
how do we ship filesystem changes to the host?
|
||
|
||
or:
|
||
|
||
* allow modules to declare environment.*, use pseudofile on build and
|
||
create real files on host. will need to keep the implementation on
|
||
host faily simple because restricted environment
|
||
|
||
Tue Sep 27 16:14:18 BST 2022
|
||
|
||
TODO list is getting both longer and shorter, though longer on
|
||
average.
|
||
|
||
2) perhaps we shouldn't use process-based services like [ou]dhcp as
|
||
queryable endpoint for interface addresses (e.g. when adding routes).
|
||
Instead have a separate service for interface address that depends on
|
||
the *dhcp and uses its output
|
||
|
||
3) when I killed ppp it restarted, but I don't think it reran
|
||
defaultroute which is supposed to depend on it. (Might be important
|
||
e.g. if we'd been assigned a different IP address). Investigate
|
||
semantics of s6-rc service dependencies
|
||
|
||
4) figure out a nice way to fit ppp into this model as it actually
|
||
creates the interface instead of using an existing unconfigured one
|
||
|
||
5) write a test for udhcp
|
||
|
||
7) some of the pppoe config should be moved into a ppp service
|
||
|
||
11) haven't done (overlayfs) overlays at all
|
||
|
||
13) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
|
||
|
||
14) add ipv6 support generally
|
||
|
||
15) "ip address add" seems to magically recognise v4 vs v6 but
|
||
is that specified or fluke?
|
||
|
||
19) ship logs somehow to log collection system
|
||
|
||
21) dhcp, dns, hostap service for lan
|
||
|
||
22) support real hardware
|
||
|
||
Tue Sep 27 22:00:36 BST 2022
|
||
|
||
Found the cause of huge image size: rp-pppoe ships with scripts that
|
||
reference build-time packages, so we have x86-64 glibc in there
|
||
|
||
We don't need syslog just to accommodate ppp, there's an underdocumented
|
||
option for it to log to a file descriptor
|
||
|
||
Wed Sep 28 16:04:02 BST 2022
|
||
|
||
Based on https://unix.stackexchange.com/a/431953 if we can forge
|
||
ethernet packets we might be able to write tests for e.g. "is the vm
|
||
running a dhcp server"
|
||
|
||
Wed Sep 28 21:29:05 BST 2022
|
||
|
||
We can use Python "scapy" to generate dhcp request packets, and Python
|
||
'socket' model to send them encapsulated in UDP. Win
|
||
|
||
It's extremely janky python
|
||
|
||
Thu Sep 29 15:24:37 BST 2022
|
||
|
||
Two points to ponder
|
||
|
||
1) where service config depends on outputs of other services, we
|
||
do that rather ugly "$(cat ${output ....})" construct. Can we improve on
|
||
that? Maybe we could have some kind of tooling to read them as environment
|
||
variables ...
|
||
|
||
2) we have given no consideration yet to secrets. we want the secrets to
|
||
be not in the store; we want some way of refreshing them when they change
|
||
|
||
Sat Oct 1 14:24:21 BST 2022
|
||
|
||
The MAC80211_HWSIM kernel config creates virtual wlan[01] devices
|
||
which hostapd will work with, and a hwsim0 which we can use to monitor
|
||
(though not inject) trafic. Could we use this for wifi tests? How do
|
||
we make the guest hwsim0 visible to the host?
|
||
|
||
|
||
Sat Oct 1 18:41:31 BST 2022
|
||
|
||
virtual serial ports: I struggled with qemu for ages to get this to work.
|
||
You also need the unhelpfully named CONFIG_VIRTIO_CONSOLE option in
|
||
kconfig
|
||
|
||
QEMU_OPTIONS="-nodefaults -chardev socket,path=/tmp/wlan,server=on,wait=off,id=wlan -device virtio-serial-pci -device virtserialport,name=wlan,chardev=wlan"
|
||
|
||
Sun Oct 2 09:34:48 BST 2022
|
||
|
||
We could implement the secrets store as a service, then the secrets
|
||
are outputs.
|
||
|
||
Things we can do in qemu
|
||
|
||
1) make interface address service that depends on dhcp, instead of
|
||
being set by it directly
|
||
2) check out restart behaviour of dependent services when depended-on
|
||
service dies
|
||
3) pppd _creates_ an interface, work out how to fit it into this model
|
||
5) add bridge support for lan
|
||
8) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
|
||
9) get ipv6 address from pppoe
|
||
10) get ipv6 delegation from pppoe and add prefix to lan
|
||
11) support dhcp6 in dnsmasq, and advertise prefix on lan
|
||
12) firewalling and nat
|
||
- default deny or zero trust?
|
||
14) write secrets holder as a service with outputs
|
||
20) should we check that references to outputs actually correspond with
|
||
those provided by a service
|
||
|
||
Things we probably do on hardware
|
||
|
||
6) writable filesystem (ubifs?)
|
||
7) overlay with squashfs/ubifs - useful? think about workflows for
|
||
how this thing is installed
|
||
16) gl-ar750
|
||
17) mediatek device - gl-mt300 or whatever I have lying around
|
||
18) some kind of arm (banana pi router?)
|
||
19) should we give routeros a hardware ethernet and maybe an l2tp upstream,
|
||
then we could dogfood the hardware devices. we could run an l2tp service
|
||
at mythic-beasts, got a /48 there
|
||
|
||
|
||
|
||
https://skarnet.org/software/s6/s6-fghack.html looks like a handy thing
|
||
we hope we'll never have to use
|
||
|
||
Sun Oct 2 22:22:17 BST 2022
|
||
|
||
> make interface address service that depends on dhcp, instead of being set by it directly
|
||
|
||
We can do this for dhcp, but we can't do it for ppp. Running the ppp service
|
||
creates a ppp[012n] interface and assigns it an ipv4 address and there's not
|
||
a whole lot we can easily do to unbundle that.
|
||
|
||
So
|
||
|
||
- the ppp service needs to behave as if it were a "link" service
|
||
- either it *also* needs to behave as an address service, or we could
|
||
have an address service that subscribes to it and does nothing other than
|
||
translate output formats
|
||
|
||
Note regarding that second bullet: at the moment the static address
|
||
service has no outputs anyway!
|
||
|
||
|
||
Tue Oct 4 22:43:02 BST 2022
|
||
|
||
While trying to make the TFTP workflow not awful I seem to have written
|
||
a TFTP server.
|
||
|
||
|
||
Thu Oct 6 19:26:40 BST 2022
|
||
|
||
We have a booting kernel on gl-ar750, but we aren't at a point that it can
|
||
find a root filesystem
|
||
|
||
I'd *like* to be able to use the same delivery mechanism (kernel uimage
|
||
concatenated monolithic
|
||
|
||
|
||
Sat Oct 8 11:12:09 BST 2022
|
||
|
||
We have it booting on hardware, mounting root fs, running getty :-)
|
||
|
||
For NixWRT TFTP boots we used a single image with both kernel and squashfs, and
|
||
relied on CONFIG_MTD_SPLIT_FIRMWARE to identify where the boundary was and create
|
||
/dev/mdtn devices at the right offsets so that the kernel could find the
|
||
squashfs
|
||
|
||
For Liminix we're not going to do that.
|
||
|
||
* CONFIG_MTD_SPLIT_FIRMWARE is only available in OpenWrt patches
|
||
* it's an uncomfortable level of automagic just to save us doing two TFTPs
|
||
instea of one
|
||
* the generated image is anyway not the one we'd write to flash (has unneeded
|
||
PHRAM support)
|
||
* it means we need to memmap out enough ram for the whole image inc kernel when really
|
||
all we need to reserve is the rootfs bit
|
||
|
||
|
||
Sat Oct 8 11:23:08 BST 2022
|
||
|
||
"halt" and "reboot" don't work on gl-ar750
|
||
|
||
Sat Oct 8 13:10:00 BST 2022
|
||
|
||
Where do we go with this ar750?
|
||
|
||
- wired networking
|
||
- wifi
|
||
|
||
|
||
Sun Oct 9 09:57:35 BST 2022
|
||
|
||
We want to be able to package kernel modules as regular derivations, so that
|
||
they get added to the filesystem
|
||
|
||
This means they need access to kernel.modulesupport
|
||
|
||
This means kernel.modulesupport needs to be in pkgs too?
|
||
|
||
This is fine, probably, but we'd like to avoid closing over vmlinux because
|
||
there's no need for it to be in the filesystem
|
||
|
||
Mon Oct 10 22:57:23 BST 2022
|
||
|
||
The problem is that kernel kconfig options are manipulated in the
|
||
liminix modules, which means that data must be (transitively) available
|
||
to modules, so they can't be regular packages as they're tied so tightly
|
||
to the exact config. Unless we define a second overlay that references
|
||
the configuration object, but my head hurts when I start to think about that
|
||
so maybe not.
|
||
|
||
Tue Oct 11 00:00:13 BST 2022
|
||
|
||
Building ag71xx (ethernet driver) as a module doesn't work because
|
||
it references a symbol ath79_pll_base in the kernel that hasn't been
|
||
marked with EXPORT_SYMBOL.
|
||
|
||
We could forge an object file that "declares" it with a gross and disgusting hack like this
|
||
|
||
$ echo > empty # not actually "empty", objcopy complains about that
|
||
$ grep ath79_pll_base /nix/store/jcc114cd13xa8aa4mil35rlnmxnlmv09-vmlinux-mips-unknown-linux-musl-modulesupport/System.map
|
||
ffffffff807b2094 B ath79_pll_base
|
||
$ mips-unknown-linux-musl-objcopy -I binary -O elf32-big --add-section .bss=empty --add-symbol ath79_pll_base=.bss:0x807b2094 empty f.o
|
||
|
||
I don't claim this is a good idea, just an idea. Thought was that we would not
|
||
have to declare its type this way. Also it might not work with kaslr
|
||
https://stackoverflow.com/a/68903503
|
||
|
||
|
||
Backstory: why are we trying to build this as a module? because the
|
||
openwrt fork of it seems to be a bit more advanced than the mainline,
|
||
and I *suspect* that the mainline version doesn't work with our
|
||
openwrt-based device tree which ahs the mdio as a nested node inside
|
||
the ag71xx node - in mainline the driver seems to have all the mdio
|
||
stuff inline. So, could we build the openwrt driver without patching
|
||
the crap out of our kernel
|
||
|
||
Sun Oct 16 15:25:33 BST 2022
|
||
|
||
Executive decision: let's use the openwrt kernel (at least for
|
||
gl-ar750). Mainline kernel doesn’t have devicetree support for this
|
||
device or the SoC it’s based on, and the OpenWrt dts for it doesn’t
|
||
have the same "compatible"s, which makes me think that an indefinite
|
||
amount of patching will be necessary to make dts/modules for one of
|
||
them work with a kernel for the other
|
||
|
||
As a result: now we have eth0 appearing, but not eth1? Guessing we
|
||
need to add some kconfig for the switch
|
||
|
||
Mon Oct 17 21:23:37 BST 2022
|
||
|
||
we are spending ridiculous amounts of cpu/io time copying kernel source
|
||
trees from place to place, because we have kernel tree preparation
|
||
and actual building as two separate derivations.
|
||
|
||
I think the answer is to have a generic kernel build derivation
|
||
in the overlay, and then have the device overlays override it with
|
||
an additional phase to do openwrt patching or whatever else they
|
||
need to do.
|
||
|
||
Tue Oct 18 23:02:43 BST 2022
|
||
|
||
* previous TODO list is Aug 02, need to review
|
||
* dts is hardcoded to gl-ar750, that needs cleaning up
|
||
* figure out persistent addresses for ethernet
|
||
* fix halt/reboot
|
||
* "link" services have a "device" attribute, would much rather
|
||
have everything referenced using outputs than having two
|
||
different mechanisms for reading similar things
|
||
* Kconfig.local do we still need it?
|
||
* check all config instead of differentiating config/checkedConfig
|
||
|
||
Sun Feb 5 18:14:02 GMT 2023
|
||
|
||
We have resumed.
|
||
commit eb4efab6a215bf03cf5aab10d4ac909e83e9c148
|
||
Author: Daniel Barlow <dan@telent.net>
|
||
Date: Sat Jan 28 23:18:28 2023 +0000
|
||
|
||
|
||
* find out what works
|
||
* add that stuff to hydra
|
||
* fix the rest
|
||
* add that stuff to hydra
|
||
* convert to flake
|
||
* check if routeros can be run interactively
|
||
* some per-device docs in a form that can be transcluded for website
|
||
|
||
|
||
ci builds
|
||
|
||
* each of the tests has hardcoded device/config/etc
|
||
* build an "empty" configuration for each target device
|
||
* build an unstable configuration for qemu
|
||
|
||
|
||
Wed Feb 8 16:52:22 GMT 2023
|
||
|
||
We have hydra builds for all the previously-working devices, though we
|
||
don't yet know if any of those builds actually boots or does anything
|
||
useful.
|
||
|
||
[DONE] Would be nice to clean up the run-qemu and connect-qemu scripts
|
||
and put them in the buildEnv
|
||
|
||
Some thought needed about how to hook up the gl-ar750 to the internets,
|
||
ideally in a way that mirrors typical real uses. AAISP have an L2TP
|
||
service, but I would prefer to use pppoe on the device, so how to
|
||
translate one to t'other on an intermediary/gateway machine?
|
||
https://www.rfc-archive.org/getrfc.php?rfc=3817#gsc.tab=0 exists
|
||
as an RFC but I can't find anything that actually implements it
|
||
|
||
Actual Documentation (e.g. user and developer manuals) should live in
|
||
the liminix repo so it corresponds with the code, and can be rsynced
|
||
from there to the web site, maybe with a deploy hook or something.
|
||
Haven't decided what a good doc format is yet
|
||
|
||
If we create a flake for Hydra to run on, that _more or less_ means we
|
||
don't have any manual hydra jobset configuration to document.
|
||
|
||
There are still some tests that need adding to CI
|
||
|
||
[DONE] Should the per-device config be a module not an overlay? Given that
|
||
half of what's in it is kernel config (a module could set this)
|
||
and the rest is source tarball download specs (needs nixpkgs,
|
||
a module has this and could set it too) I wonder why it isn't already
|
||
|
||
[ALREADY DOES] Can we make Hydra report output sizes so we can plot closure size
|
||
trends and see if it all goes awful?
|
||
|
||
Thu Feb 9 08:14:39 GMT 2023
|
||
|
||
For better developer experience, I am thinking that either (1)
|
||
swap tasks 2 and 3 (writable filesystem before module system)
|
||
or (2) add NBD support so I can iterate on a real device without
|
||
full rebuilds every time
|
||
|
||
|
||
Fri Feb 10 06:18:25 PM GMT 2023
|
||
|
||
did the overlay->module thing
|
||
|
||
[DONE] Need to fix all the configuration around PHRAM, I can't see how it
|
||
would ever work
|
||
|
||
Sat Feb 11 14:37:45 GMT 2023
|
||
|
||
Consolidated TODO
|
||
|
||
* figure out persistent addresses for ethernet (?)
|
||
[SEEMS DONE] * fix halt/reboot
|
||
[DONE, NO] * Kconfig.local do we still need it?
|
||
[DONE] * check all config instead of differentiating config/checkedConfig
|
||
|
||
Things we can do in qemu
|
||
|
||
* "link" services have a "device" attribute, would much rather
|
||
have everything referenced using outputs than having two
|
||
different mechanisms for reading similar things
|
||
1) make interface address service that depends on dhcp, instead of
|
||
being set by it directly
|
||
2) check out restart behaviour of dependent services when depended-on
|
||
service dies
|
||
3) pppd _creates_ an interface, work out how to fit it into this model
|
||
5) add bridge support for lan
|
||
8) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
|
||
9) get ipv6 address from pppoe
|
||
10) get ipv6 delegation from pppoe and add prefix to lan
|
||
11) support dhcp6 in dnsmasq, and advertise prefix on lan
|
||
12) firewalling and nat
|
||
- default deny or zero trust?
|
||
14) write secrets holder as a service with outputs
|
||
20) should we check that references to outputs actually correspond with
|
||
those provided by a service
|
||
* Actual Documentation (e.g. user and developer manuals)
|
||
* make a flake
|
||
* There are still some tests that need adding to CI
|
||
|
||
Things we probably do on hardware
|
||
|
||
[DONE] * dts is hardcoded to gl-ar750, that needs cleaning up
|
||
6) writable filesystem (ubifs?)
|
||
7) overlay with squashfs/ubifs - useful? think about workflows for
|
||
how this thing is installed
|
||
16) gl-ar750
|
||
[DONE] * decide how to hook up the gl-ar750 to the internets
|
||
17) mediatek device - gl-mt300 or whatever I have lying around
|
||
18) some kind of arm (banana pi router?)
|
||
[DONE DIFERENTLY] 19) should we give routeros a hardware ethernet and maybe an l2tp upstream,
|
||
then we could dogfood the hardware devices. we could run an l2tp service
|
||
at mythic-beasts, got a /48 there
|
||
|
||
|
||
Sat Feb 11 15:57:31 GMT 2023
|
||
|
||
The reason we would like to run PPPoE instead of L2TP on the "rotuer" device is
|
||
|
||
- closer to real world scenario
|
||
- means no need to run dhcp client on the wan interface before we
|
||
even get to start the l2tpd
|
||
|
||
|
||
Sun Feb 12 14:57:28 GMT 2023
|
||
|
||
https://github.com/katalix/go-l2tp#kpppoed
|
||
|
||
|
||
Mon Feb 13 04:44:09 PM GMT 2023
|
||
|
||
if the gl-ar750 is connected to an ethernet card that linux is ignoring,
|
||
we're going to have to set up _some_ qemu thing just to run tftp from.
|
||
|
||
Tue Feb 14 17:59:34 GMT 2023
|
||
|
||
We should do a derivation that creates an ISO image and a qemu shell
|
||
script based on a configuration.nix, and put it in buildEnv. We'll
|
||
call it "borderNetVm" :
|
||
|
||
> A broadband remote access server (BRAS, B-RAS or BBRAS) routes
|
||
traffic to and from broadband remote access devices such as digital
|
||
subscriber line access multiplexers (DSLAM) on an Internet service
|
||
provider's (ISP) network.[1][2] BRAS can also be referred to as a
|
||
broadband network gateway or border network gateway (BNG).[3]
|
||
|
||
(for consistency we should rename the "access" qemu socket network to
|
||
match whatever we call this)
|
||
|
||
rm border.qcow2 ; nix-shell --argstr liminix `pwd` --argstr nixpkgs `pwd`/../nixpkgs --argstr unstable `pwd`/../unstable-nixpkgs/ ci.nix -A buildEnv --run "run-border-vm"
|
||
|
||
Wed Feb 15 22:56:59 GMT 2023
|
||
|
||
configuration for border vm needs to come from somewhere so it's good
|
||
for more people than just me
|
||
|
||
- pci device for setting up the ethernet
|
||
- lns address
|
||
- uid so it can do 9p shares? do we need to map things here?
|
||
|
||
also need to document the host-side bits so that people can set up
|
||
their spare ethernet as vfio
|
||
|
||
next step for hacking is to figure out what I was doing with pppoe
|
||
|
||
Wed Feb 15 22:59:56 GMT 2023
|
||
|
||
docs ...
|
||
|
||
* introduction
|
||
|
||
* user guide
|
||
** how to build it
|
||
** how to flash it on your device
|
||
** what to put in configuration.nix
|
||
** modules
|
||
|
||
* developer guide
|
||
** building/running with qemu
|
||
*** emulated upstream
|
||
** building/running on hardware
|
||
*** run in place with TFTP
|
||
*** emulated upstream
|
||
** CI
|
||
** Roadmap
|
||
** Contributing
|
||
|
||
|
||
|
||
nix-shell -p sphinx --run "make -C doc html"
|
||
|
||
https://francis.begyn.be/blog/nixos-home-router contains information about avahi reflector
|
||
|
||
|
||
Fri Feb 17 00:09:34 GMT 2023
|
||
|
||
29 11.282085831 81.187.76.242 → 8.8.8.8 ICMP 106 Echo (ping) request id=0x0187, seq=2/512, 4
|
||
30 11.286314642 90.155.53.19 → 81.187.76.242 ICMP 78 Destination unreachable (Communication admin)
|
||
|
||
We're getting packets over the pppoe-l2tp relay thing. Just have to
|
||
work out now why we're not routing
|
||
|
||
Fri Feb 17 16:54:41 GMT 2023
|
||
|
||
Haha. We weren't routing because we'd used the wrong CHAP password
|
||
|
||
|
||
|
||
Fri Feb 17 16:58:27 GMT 2023
|
||
|
||
This TODO is for nlnet task 1 and for bits of subsequent tasks that
|
||
are annoying enough that I might poke at them anyway:
|
||
|
||
|
||
1) gl-ar750, why do we get "ag71xx 19000000.eth: invalid MAC address, using random address"
|
||
2) gl-ar750, wifi
|
||
3) document services so I can remember how they work. Refer back to Oct 18 for notes that no longer make sense
|
||
4) check out restart behaviour of dependent services when depended-on service dies
|
||
5) pppd _creates_ an interface, work out how to fit it into this model
|
||
6) add bridge support for lan
|
||
7) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
|
||
8) get ipv6 address from pppoe
|
||
9) get ipv6 delegation from pppoe and add prefix to lan
|
||
10) support dhcp6 in dnsmasq, and advertise prefix on lan
|
||
11) firewalling and nat - default deny or zero trust?
|
||
13) should we check that references to outputs actually correspond with
|
||
14) make a flake?
|
||
15) see if there are other tests that need adding to CI
|
||
15a) is bordervm derivation tested?
|
||
18) gl-mt300a
|
||
19) gl-mt300n-v2
|
||
20) publish the manual using CI
|
||
|
||
12) write secrets holder as a service with outputs
|
||
16) writable filesystem (ubifs?)
|
||
17) overlay with squashfs/ubifs - useful? think about workflows for how this thing is installed
|
||
|
||
|
||
I could plug tninkpad into the gl-ar750 LAN port to dogfood the wired
|
||
networking
|
||
|
||
Sat Feb 18 14:26:45 GMT 2023
|
||
|
||
Apparently we're not currently doing anything special with busybox,
|
||
just using the default nixos build with the default applets.
|
||
|
||
We'd like to be able to say in modules which applets they need,
|
||
so that we build all necessary applets but don't waste any space.
|
||
But we don't want to build a busybox for each module because that
|
||
would be a big waste of space.
|
||
|
||
One option:
|
||
- add busybox configuration to `config` so that modules can maul it
|
||
- add a busybox module that builds it with union of all config and
|
||
adds link in /bin
|
||
- make everything else look in /bin instead of referencing pkgs.busybox
|
||
|
||
It would be good if services could assert somehow that their required
|
||
config is present
|
||
|
||
Sat Feb 18 23:45:13 GMT 2023
|
||
|
||
# lsmod
|
||
|
||
cd /lib/modules/mac80211
|
||
insmod ./compat/compat.ko
|
||
insmod ./net/wireless/cfg80211.ko
|
||
insmod ./net/mac80211/mac80211.ko
|
||
insmod ./drivers/net/wireless/ath/ath.ko
|
||
insmod ./drivers/net/wireless/ath/ath9k/ath9k_hw.ko
|
||
insmod ./drivers/net/wireless/ath/ath9k/ath9k_common.ko
|
||
insmod ./drivers/net/wireless/ath/ath9k/ath9k.ko
|
||
insmod ./drivers/net/wireless/ath/ath10k/ath10k_core.ko
|
||
insmod ./drivers/net/wireless/ath/ath10k/ath10k_pci.ko
|
||
|
||
[21.344930] ath9k 18100000.wmac: failed to load calibration data from mtd device
|
||
[21.352728] ath: phy0: parsing configuration from OF node
|
||
[21.362576] ath: phy0: serialize_regmode is 0
|
||
[21.367092] ath: phy0: UNDEFINED -> AWAKE
|
||
[21.372051] ath: phy0: Trying EEPROM access at Address 0x03ff
|
||
[21.377999] ath: phy0: Trying EEPROM access at Address 0x0fff
|
||
[21.383940] ath: phy0: Trying EEPROM access at Address 0x01ff
|
||
[21.389879] ath: phy0: Trying OTP access at Address 0x03ff
|
||
[21.400396] Data bus error, epc == 8027964c, ra == 83125880
|
||
[21.406156] Oops[#1]:
|
||
|
||
|
||
Sun Feb 19 18:15:27 GMT 2023
|
||
|
||
We have ath9k listening for packets. To make this ready to use:
|
||
|
||
- need to load the modules
|
||
- enable bridging lan with wlan
|
||
- packet forwarding
|
||
- firewall
|
||
|
||
|
||
Mon Feb 20 20:41:17 GMT 2023
|
||
|
||
need to fix all the other broken ci jobs :-(
|
||
|
||
The wlan test is failing because we moved mac80211 to a module and
|
||
there's nothing running to insmod it
|
||
|
||
Wed Feb 22 18:17:17 GMT 2023
|
||
|
||
bridge is e2b3738d0f8c3f2fd76ebcef65612de502a7b121 but it's the wrong
|
||
way around: the master interface needs to be up whether or not all
|
||
of its children are, so members depend on master not vice versa
|
||
|
||
Next steps:
|
||
- re-implement bridge, enable bridging lan with wlan
|
||
- packet forwarding
|
||
- firewall
|
||
- ath10k
|
||
- ipv6
|
||
|
||
Fri Feb 24 23:37:56 GMT 2023
|
||
|
||
bridging wlan was made complex because can't add a device to a bridge
|
||
until it's operational, and wlan0 is not operational until hostapd
|
||
has churned awhile. Therefore, "waitup" listens for netlink messages
|
||
and notifies s6 readiness stuff
|
||
|
||
we have a firewall nft script but we're not running it on boot
|
||
|
||
we have forwarding but no dns, maybe because we haven't told
|
||
dnsmasq about any upstream servers
|
||
|
||
Sun Feb 26 21:08:47 GMT 2023
|
||
|
||
to add firmware we need to put files in /lib/firmware, which means
|
||
a module
|
||
|
||
i guess we should do that in the device module
|
||
|
||
we can create the firmware files as packages
|
||
|
||
|
||
for the cal data we would like to get it from the device MTD "art"
|
||
partition at
|
||
boot time.
|
||
|
||
f
|
||
====from openwrt
|
||
|
||
|
||
|
||
case "$FIRMWARE" in
|
||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||
case $board in
|
||
allnet,all-wap02860ac|\
|
||
araknis,an-500-ap-i-ac|\
|
||
araknis,an-700-ap-i-ac|\
|
||
engenius,eap1200h|\
|
||
engenius,enstationac-v1|\
|
||
glinet,gl-x750|\
|
||
watchguard,ap300)
|
||
caldata_extract "art" 0x5000 0x844
|
||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
|
||
|
||
|
||
|
||
|
||
caldata_extract part offset count
|
||
caldata_dd $mtd /lib/firmware/$FIRMWARE $count $offset || \
|
||
caldata_die "failed to extract calibration data from $mtd"
|
||
dd if=$source of=$target iflag=skip_bytes,fullblock bs=$count skip=$offset count=1 2>/dev/null
|
||
|
||
=======
|
||
|
||
part=$(basename $(dirname $(grep -l art /sys/class/mtd/*/name)))
|
||
dd if=/dev/$part \
|
||
of=/run/cal-pci-0000:00:00.0.bin iflag=skip_bytes,fullblock \
|
||
bs=0x844 skip=0x5000 count=1
|
||
|
||
Mon Feb 27 22:46:37 GMT 2023
|
||
|
||
Found and fixed a bunchg of things that were stopping ath10k from
|
||
working. The remaining problem is (I think) that insmod is not
|
||
synchronous, so "ip link set up dev wlan1" doesn't work immediately
|
||
after the module is inserted. Maybe we need another netlink thing
|
||
to wait until the interface is present.
|
||
|
||
|
||
Wed Mar 1 18:26:44 GMT 2023
|
||
|
||
ath10k works, but the wlan module loading stuff is quite kludgey
|
||
|
||
I wonder if wlan0, wlan1, eth0, eth1 etc should be defined per-device
|
||
- how does the aplication config know which devices exist? If we
|
||
decide to switch to some form of persistent device naming, the names
|
||
will differ from one device to the next. Perhaps the device should
|
||
also provide standard names where possible?
|
||
|
||
services.network.links = {
|
||
lan = interface { ... };
|
||
wan = interface { ... };
|
||
wlan_24 = interface { ... };
|
||
wlan_5 = interface { ... };
|
||
}
|
||
|
||
Thu Mar 2 22:45:11 GMT 2023
|
||
|
||
We have a flashable image!
|
||
|
||
Now we can use the gl-ar750 for internet access in the shed, we can
|
||
apppropriate the other device that's in there and try Liminix on it
|
||
|
||
Fri Mar 3 23:08:58 GMT 2023
|
||
|
||
If we're going to unplug serial console from the gl-ar750 maybe we
|
||
should install an ssh server first.
|
||
|
||
0) set a root password
|
||
1) allow setting a root password from configuration.nix
|
||
(means defining config.users properly)
|
||
2) allow authorizedKeys per user
|
||
3) dropbear service
|
||
4) see if the wired lan works! :-)
|
||
|
||
|
||
Sat Mar 4 12:31:07 GMT 2023
|
||
|
||
To improve logging, each service should have its own s6-log service
|
||
which prefixes the service name onto the log line and then sends to
|
||
stdout
|
||
|
||
https://skarnet.org/software/s6/servicedir.html
|
||
https://skarnet.org/software/s6/s6-log.html
|
||
|
||
As far as I can tell, the `log` directory inside the service
|
||
directory should itself be a service directory for the s6-log
|
||
process that does this
|
||
|
||
.... hahaha no that doesn't work
|
||
|
||
s6-rc, for some reason, ignores the `log` directory and requires
|
||
that loggers be done with consumer-for and producer-for instead
|
||
|
||
|
||
Sat Mar 4 23:27:00 GMT 2023
|
||
|
||
notes for this week's news update
|
||
|
||
* ath10k kernel support and and firmware
|
||
|
||
- 5GHz wifi works
|
||
|
||
- need to retrieve the firmware from a special - partition on the
|
||
device itself, so we do that using a service that - the wlan
|
||
interface depends on
|
||
|
||
* replace waitup with more generally useful ifwait
|
||
|
||
to make the ath10k load at boot, we need to insert the module and then
|
||
wait for it to do something or other in the background before we can
|
||
configure the interface. so we need something like waitup but
|
||
for presence not operational state
|
||
|
||
it turns out that a program that just waits for a particular interface
|
||
state and then exits is quite simple to add into run scripts and
|
||
we don't need all that notification-fd stuff anyway
|
||
|
||
* move FW_LOADER* config to modules/base
|
||
|
||
* rejig config a bit.
|
||
- device hardware characteristics are now under
|
||
the `hardware` key and include the available network interfaces.
|
||
- options for users and groups are now defined a bit more
|
||
specifically than "attrset", making it possible to e.g. set a
|
||
root password
|
||
- dts is moved from `boot` to `hardware`
|
||
|
||
|
||
* now producing flashable images, so you can generate a liminix config
|
||
and write it to the device instead of having to boot using TFTP and
|
||
a serial console every time
|
||
|
||
* ssh support
|
||
|
||
* prefix logs with the service name
|
||
|
||
Sun Mar 5 22:51:21 GMT 2023
|
||
|
||
Added swconfig: it was a straight copy from nixwrt and hasn't changed
|
||
upstream since. But don't need it, because the lan port works fine
|
||
without it (I assume both lan ports and the cpu are all connected
|
||
untagged)
|
||
|
||
Mon Mar 6 09:42:33 GMT 2023
|
||
|
||
Today I plugged in the mt300a.
|
||
|
||
echo 17 >/sys/class/gpio/export
|
||
echo out >/sys/class/gpio/gpio17/direction
|
||
|
||
|
||
why are our images getting big
|
||
|
||
- lua links ncurses
|
||
- hostapd links openssl and sqlite
|
||
- nftables needs
|
||
- iptables?
|
||
- jansson? what is that?
|
||
- libedit/readline
|
||
- ifwait needs bash
|
||
|
||
|
||
File: result/squashfs
|
||
Size: 10371072 Blocks: 20256 IO Block: 4096 regular file
|
||
|
||
with smaller nftables: 9617408 Blocks: 18784
|
||
|
||
hostapd wqithout sqlite 9003008 Blocks: 17584
|
||
|
||
without bash: 8622080 Blocks: 16840 IO Block: 4096 regular file
|
||
|
||
without lua readline: bigger?! 8769536 Blocks: 17128 IO Block: 4096 regular file
|
||
|
||
|
||
Mon Mar 6 20:57:49 GMT 2023
|
||
|
||
[ 0.539992] mtk_soc_eth 10100000.ethernet: mdio-bus disabled
|
||
[ 10.493918] platform regulatory.0: Direct firmware load for regulatory.db fail
|
||
ed with error -2
|
||
[ 10.502828] cfg80211: failed to load regulatory.db
|
||
|
||
Check in morning, but whichever port the ethernet cable is plugged into,
|
||
is considered by the kernel as port 0 - which I think we should treat as
|
||
WAN
|
||
|
||
VLAN 1:
|
||
vid: 1
|
||
ports: 1 2 3 4 5 6t
|
||
VLAN 2:
|
||
vid: 2
|
||
ports: 0 6t
|
||
|
||
ip link add link eth0 name lan type vlan id 1
|
||
ip link add link eth0 name wan type vlan id 2
|
||
|
||
figure out how to add these to gl-mt300a device config
|
||
then extedner.nix can add a bridge
|
||
|
||
Tue Mar 7 20:13:15 GMT 2023
|
||
|
||
We need NTP or some other way to get accurate time
|
||
|
||
[done] Need to add regulatory.db somewhere standard, maybe modules/wlan?
|
||
|
||
Tue Mar 7 21:43:56 GMT 2023
|
||
|
||
When we get to phase 2, need to review how network interfaces and
|
||
their addresses interplay. It should be possible to have a network
|
||
interface and interrogate the addresses associated with it - esp
|
||
with ipv6 where there are multiple addresses for the device
|
||
|
||
This thought prompted by looking at the loopback interface, which is
|
||
a bundle of addresses and therefore we can't see what any of them are
|
||
|
||
|
||
Tue Mar 7 22:05:44 GMT 2023
|
||
|
||
[phase 1]
|
||
20) publish the manual using CI
|
||
30) document flashing process
|
||
31) go through all the unexpected dmesg and triage it
|
||
25) ntp or some other accurate time source
|
||
|
||
[phase 1.5]
|
||
26) ssh keys
|
||
8) get ipv6 address from pppoe
|
||
9) get ipv6 delegation from pppoe and add prefix to lan
|
||
10) support dhcp6 in dnsmasq, and advertise prefix on lan
|
||
11) firewalling and nat - default deny or zero trust?
|
||
7) upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
|
||
32) set up iperf and do some performance measurement
|
||
35) also we need to check our wireless country code
|
||
|
||
|
||
[phase 2]
|
||
3) document services so I can remember how they work. Refer back to Oct 18 for notes that no longer make sense
|
||
4) check out restart behaviour of dependent services when depended-on service dies
|
||
13) check that references to outputs correspond with declared outputs
|
||
33) network interfaces vs the services that manage their addresses
|
||
34) write a short guide explaining how to use s6-svc
|
||
|
||
[phase n]
|
||
12) write secrets holder as a service with outputs
|
||
16) writable filesystem (ubifs?)
|
||
17) overlay with squashfs/ubifs - useful? think about workflows for how this thing is installed
|
||
|
||
|
||
dmesg lines to investigate for gl-mt300a:
|
||
[ 0.467314] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partition
|
||
[ 0.539709] mtk_soc_eth 10100000.ethernet: mdio-bus disabled ?
|
||
[ 8.778513] compat: loading out-of-tree module taints kernel.
|
||
[ 17.686561] ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
|
||
[ 17.696025] ieee80211 phy0: rt2800_loft_iq_calibration: Warning - RF RX busy in LOFT IQ calibration
|
||
[ 17.875147] ieee80211 phy0: rt2800_rxiq_calibration: Warning - Timeout waiting for MAC status in RXIQ calibration
|
||
|
||
for gl-ar750:
|
||
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS0", will be passed to user space.
|
||
[ 0.416679] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
|
||
[ 0.825495] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
|
||
[ 1.632700] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
|
||
[ 1.639824] pci_bus 0000:00: root bus resource [io 0x0000]
|
||
[ 1.645601] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
|
||
[ 32.032326] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
|
||
[ 36.627844] ath10k_pci 0000:00:00.0: failed to receive initialized event from target: 00000000
|
||
|
||
|
||
Fri Mar 10 13:17:56 GMT 2023
|
||
|
||
Lunchtime notes on images for real devices, vs ci.nix
|
||
|
||
* successfully building an image doesn't mean that the image boots
|
||
or does anything useful
|
||
|
||
* don't want to faff with serial wires on every device every time
|
||
to test it. so
|
||
|
||
* ideally, build ram-based images of rotuer, extneder, arhcive in CI
|
||
with a watchdog timer that will reboot if it can't see the network
|
||
|
||
* figure out how to boot into the new image from an ssh connection. I
|
||
assume the challenging bit here is grabbing x MB of contiguous phys
|
||
mem after boot: I think we'd have to reserve it at _first_ boot and
|
||
then somehow copy into it before rebooting
|
||
|
||
An easier first goal might be a tool to flash from the shell command line,
|
||
but that runs a greater risk of bricking
|
||
|
||
|
||
Fri Mar 10 14:35:40 GMT 2023
|
||
|
||
programs.busybox = {
|
||
enable = true;
|
||
applets = [... ];
|
||
config = {
|
||
};
|
||
}
|
||
|
||
Fri Mar 10 23:49:04 GMT 2023
|
||
|
||
Well, we have the backup host config up and running - though haven't
|
||
plugged it back into its disk yet.
|
||
|
||
For task 1 what remains is
|
||
|
||
1) ntp sync
|
||
2) write up the flashing procedure
|
||
3) a video?
|
||
|
||
|
||
Sat Mar 11 13:58:20 GMT 2023
|
||
|
||
================== for video
|
||
|
||
what is liminix
|
||
- nix-based system for creating OS images for routers
|
||
- not "nixos on your router"
|
||
- nixos-like module system,
|
||
- musl for libc
|
||
- s6/s6-rc for services
|
||
- entirely cross-compiled
|
||
|
||
why am i making a video?
|
||
- unless you have a suitable spare device to install on,
|
||
and you want to take it apart, it's currently hard to
|
||
take liminix for a spin
|
||
- I have these things, so I can give you a tour
|
||
|
||
let's have a look at how the hardware's hooked up
|
||
|
||
web site & manual
|
||
|
||
a config file:
|
||
- observe the comments:
|
||
- not going to spend ages on this because it's not in its final form.
|
||
- as we get more configs for more use cases, we will
|
||
get a better feel for what can be abstracted
|
||
- that will come later: work so far has been on the
|
||
hardware support side
|
||
|
||
to show that it builds, we're going to add a package. otherwise,
|
||
everything from this build is probably already cached
|
||
|
||
build the config
|
||
|
||
tftpboot on hardware
|
||
|
||
flash on hardware
|
||
|
||
show ci
|
||
|
||
show a qemu target
|
||
|
||
Mon Mar 13 22:46:46 GMT 2023
|
||
|
||
1) rsync on arhcive is failing because no nogroup group
|
||
|
||
"/nix/store/gfzzl157r8xyp38lpcfxydkiiy6zrs3c-rsync-3.2.6/bin/rsync" "--verbose" "--stats" "--password-file" "/etc/nixos/secrets/arhcive-rsync" "-rltgoDz" "/var/spool/backup" "backup@arhcive.lan::srv/"
|
||
@ERROR: invalid gid nogroup
|
||
rsync error: error starting client-server protocol (code 5) at main.c(1837) [sender=3.2.6]
|
||
|
||
2) we can run findfs in a loop until the disk appears
|
||
|
||
3) still haven't decided how to do ntp but maybe we should just use
|
||
the busybox one
|
||
|
||
4) some way to do upgrades over the wire
|
||
|
||
- boot with reserved mem and a phram device at 110-128MB even in the
|
||
flashable version
|
||
|
||
- watchdog timer in kernel
|
||
|
||
- kexec in kernel
|
||
|
||
- userland service to feed the dog as long as local network is up
|
||
(may need to start it a couple of minutes after boot, how do we
|
||
do that?)
|
||
|
||
- can we use flashcp on a phram mtd?
|
||
|
||
5) maybe setup a vhost for hydra or something
|
||
|
||
[nix-shell:~/t]$ wget --reject-regex '\?' -D localhost -N -r --exclude-directories=/api --level=2 --convert-links -e robots=off http://localhost:3003/jobset/liminix/build/
|
||
|
||
is almost a mirror
|
||
|
||
Tue Mar 14 20:17:35 GMT 2023
|
||
|
||
- do we have a phram mtd? need config for size and location
|
||
|
||
- how do we set the boot device
|
||
- for first boot need to boot real flash, use dtb, ignore bootloader args
|
||
- for kexec, boot phram, specify args somehow (could rewrite dtb)
|
||
|
||
=> can use same kernel for both if we can give kexec a dtb with
|
||
different params, which seems to be possible
|
||
|
||
so we need a module for the initial kernel to say
|
||
- create phram mtd
|
||
- boot from real mtd (will be index + 1)
|
||
- enable KEXEC in kernel
|
||
- add kexec-tools
|
||
|
||
and for the kernel we boot into
|
||
- most of the above
|
||
- except for the boot device
|
||
- create an output with objects that kexec(8) can parse
|
||
|
||
Could be same module for both with different outputs
|
||
|
||
what do we call this thing? "revertable"
|
||
|
||
Wed Mar 15 19:11:09 GMT 2023
|
||
|
||
"revertable" implies mtd support for the rootfs and a ramdisk at
|
||
defined location
|
||
|
||
"tftpboot" implies "revertable", because it will use the same ramdisk
|
||
|
||
|
||
Fri Mar 17 11:44:40 GMT 2023
|
||
|
||
- patch the kernel kexec code to pass DTB to new kernel unconditionally
|
||
- unpatch pernel to pass command line to kexec (breaks DTB passing)
|
||
- decide how we specify rootfs. doing it by number is awkward
|
||
- may be phram
|
||
- may be real mtd root
|
||
- may be real mtd root but renumbered becuase phram exists
|
||
|
||
Wild idea: we could probably get rid of the need for declaring a phram
|
||
device in the first kernel, if we can use kexec to copy the squashfs into
|
||
physical ram. As far as I can see this is a simple(sic) matter of
|
||
specifying it as a segment, but we would have to extend kexec-tools
|
||
to do this and it's quite a niche option if we make it do all the
|
||
mtd setup.
|
||
|
||
kexec --dtb=foo.dtb --map-file=squashfs@0x120000
|
||
|
||
|
||
Sat Mar 18 18:02:26 GMT 2023
|
||
What if: we added derivations for "apply openwrt changes" as packages,
|
||
which could then be called from the kernel derivation's extraPatchPhase?
|
||
There could be one for generic and one for each openwrt targetop
|
||
|
||
Mon Mar 20 18:40:53 GMT 2023
|
||
|
||
- kexec patch is sent to mailing list, keep an eye for replies
|
||
- watchdog
|
||
- ntp
|
||
- rebuild images for live devices
|
||
- can we build a static busybox with flashcp applet and scp it
|
||
to arhcive etc?
|
||
- [DONE] install mailman and hyperkitty on myhtic, create mailing list
|
||
|
||
Tue Mar 21 22:59:54 GMT 2023
|
||
|
||
I haven't found a way to arm the watchdog before userland runs, which
|
||
would be really nice: although there's WATCHDOG_HANDLE_BOOT_ENABLED
|
||
and WATCHDOG_OPEN_TIMEOUT it doesn't seem to be sufficient, Maybe
|
||
those options work only when the hardware watchdog is already
|
||
armed. It might not be completely awful insofar as any failure to
|
||
mount root usually results in panic anyway, so provided we start
|
||
watching early in boot then there's not a big window for anything
|
||
to go wrong
|
||
|
||
What should the watchdog service do? Ideally we want something that
|
||
"ratchets" : can be started in early boot and signals health as long
|
||
as the system is starting up, then once the system is in "steady
|
||
state" it stops pinging as soon as any part of that steady state
|
||
becomes unhealthy. This feels like a refinement for a much later
|
||
phase though.
|
||
|
||
Maybe the health criteria might be
|
||
(sshd and lan services are running) or (time since boot < 120s)
|
||
|
||
Thu Mar 23 00:11:23 GMT 2023
|
||
|
||
tftpboot and (kexecboot || flashable) have incompatible DTB-finding
|
||
strategies which is painful if you add both modules and then
|
||
expect tftp booting to still work
|
||
|
||
Maybe we could patch the kernel to use some better strategy for when
|
||
to use/ignore the bootloader command line: e.g "only if it
|
||
contains the string 'liminix'". Could do this by patching
|
||
arch/mips/kernel/setup.c bootcmdline_init to
|
||
|
||
if(strstr(arcs_cmdline, "liminix") == NULL) arcs_cmdline[0] = '\0'
|
||
and then defining CONFIG_MIPS_CMDLINE_DTB_EXTEND. The
|
||
bootloader command line then needs to specify only the
|
||
_additional_ parameters that weren't in the DTB
|
||
|
||
(later: that turned out to be quite straighforward)
|
||
|
||
Fri Mar 24 23:45:12 GMT 2023
|
||
|
||
- add ntp support
|
||
- [DONE] expose hydra to internet
|
||
- check MAC address weirdness?
|
||
- call Task 1 "done"
|
||
|
||
Sun Mar 26 00:19:15 GMT 2023
|
||
|
||
Would be nice to have a flash.sh built in outputs.flashable
|
||
|
||
Sun Mar 26 15:27:14 BST 2023
|
||
|
||
Let's think about services and modules.
|
||
|
||
Module
|
||
+ can change global config
|
||
* add users, groups etc
|
||
* change kernel config
|
||
* change busybox config
|
||
+ well-typed parameters
|
||
- is a "singleton": can't have the same module included twice
|
||
with different config. e.g. can't have two hostap modules running on
|
||
different wlan radios.
|
||
- can't express dependencies: a depends on b
|
||
|
||
suppose:
|
||
|
||
* modules add service functions to the config? then there's no
|
||
way to define a service while forgetting to import the module
|
||
|
||
* we use the lib.types stuff for service function arguments
|
||
|
||
* maybe we stop naming services.foo for every damn thing
|
||
|
||
* but remember, s6 services do need unique names
|
||
|
||
|
||
imports = [ ../modules/dhcp4 ];
|
||
|
||
services.dhcp4 = config.services.udhcp {
|
||
interface = lan.device;
|
||
options = {
|
||
foo = true;
|
||
bar = 42;
|
||
};
|
||
depends = [ services.some_other_thing ];
|
||
}
|
||
|
||
modules/dhcp4 udhcp fn needs to define a type for its argument, then
|
||
use something like
|
||
|
||
if arg_type.check def.value then res
|
||
else throw "The option value `${showOption loc}' in `${def.file}' is not a ${arg_type.name}.")
|
||
|
||
(where def comes from I don't know yet)
|
||
|
||
Tue Mar 28 10:44:40 BST 2023
|
||
|
||
we should reserve the name "service" for actual instantiated
|
||
services. This means we need a name for the functions that
|
||
make services. "class", "template", "fn", "maker", "factory"?
|
||
And a namespace name so they're not interleaved with real
|
||
services, which sort of suggests they are packages
|
||
|
||
if we want to do services = {
|
||
foo = longrun { ... };
|
||
bar = longrun { ... };
|
||
}
|
||
|
||
without repeating the `name` as an attribute of the longrun,
|
||
then longrun can't return a derivation: it has to return some
|
||
function that accepts `name` as a parameter.
|
||
|
||
where services.a depends on services.b, at the time its builder is run
|
||
it needs to know what name s6-rc will use for service b
|
||
|
||
maybe an s6 service definition should be an attrset not a derivation.
|
||
|
||
maybe this is outside scope for phase 2
|
||
|
||
Tue Mar 28 13:22:06 BST 2023
|
||
|
||
Reading nixos/doc/manual/development/building-parts.chapter.md it
|
||
suggests to me that we should rename config.outputs to
|
||
config.system.outputs. The more general question here is whether it's
|
||
good to be augmenting a variable called "config" with all this
|
||
generated stuff that is patently not configuration - perhaps putting
|
||
it under a "system" key will keep it all in one place
|
||
|
||
Tue Mar 28 13:32:30 BST 2023
|
||
|
||
how should we handle filesystem state? e.g. resolvconf service
|
||
|
||
if a service provides a file at a known global pathname, it can't be
|
||
parametrised - it must be a singleton.
|
||
|
||
Tue Mar 28 20:25:20 BST 2023
|
||
|
||
wondering if we should swap phases 2 and 3. We can't really address
|
||
modules without addressing services, which is phase +n, whereas we
|
||
can tackle overlay/ubi whenever
|
||
|
||
nand flash may have bad blocks
|
||
nor flash (supposedly) doesn't
|
||
|
||
ubi provides erase counts and bad block remapping on top of the mtd
|
||
interface. this means we should avoid flashcp of a ubi image straight
|
||
onto (nand) mtd as we will lose the erase counts and bad block information
|
||
that UBI tracks.
|
||
|
||
overlayfs works on a filename basis, so might not be very effective :
|
||
any change that results in a new store path will mean the entire package
|
||
appears in two places. I think it's reasonable to offer squashfs or
|
||
ubifs without overlay.
|
||
|
||
open questions:
|
||
|
||
1) if uboot doesn't support UBI, we can't boot a kernel on a ubifs
|
||
so we need reserved space for the kernel.
|
||
|
||
- unless we add some padding after the kernel, every new kernel
|
||
that's bigger than its predecessor will trash the start of the
|
||
ubi space (and wipe out its erase count)
|
||
- This suggests we should build more stuff as modules and less as
|
||
compiled-in
|
||
|
||
2) once a device has had a ubi volume created on it, probably we want
|
||
to use ubi-aware tools to update that volume in future instead of a
|
||
whole new flash, because we wish to preserve erase counts. This means
|
||
running ubiformat --image-file=foo.ubi on the device instead of flashcp
|
||
|
||
we can add a "ubi-flashable" output that creates a .ubi image and
|
||
a flashcp image that wraps it, with instructions on which to use.
|
||
|
||
Fri Mar 31 22:13:54 BST 2023
|
||
|
||
Error: too small LEB size 3968, minimum is 15360
|
||
|
||
> This error means that you are trying to mount too small UBI
|
||
volume. Probably because your flash is too small? Try to use JFFS2,
|
||
then, because it suits small flashes better since it has much lower
|
||
space overhead. Indeed, UBIFS stores much more indexing information on
|
||
the flash media than JFFS2, so it has much higher overhead. Also, UBI
|
||
has some overhead (see here). Thus, if you have a small flash device
|
||
(e.g., about 64MiB), it makes sense to consider using JFFS2.
|
||
|
||
|
||
Argh. Oh well,
|
||
|
||
Sat Apr 1 15:27:39 BST 2023
|
||
|
||
There's limited value in recreating pseudofiles for jffs2 because
|
||
the system is writable - changes made to /bin, /dev etc in config.filesystem
|
||
should take effect on a running system.
|
||
|
||
Can we take inspiration from https://grahamc.com/blog/erase-your-darlings/ ?
|
||
|
||
in early boot:
|
||
mount ramfs on /
|
||
mount the writeable filesystem on /persist/
|
||
bind mount /persist/nix on /nix
|
||
run script to populate rootfs from pseudofiles
|
||
|
||
on a router, do we need _anything_ persistent that's outside the store?
|
||
|
||
- state for dhcp leases and stuff
|
||
- secrets
|
||
- maybe, files that the user has downloaded
|
||
|
||
this will probably require initramfs. if just use jffs2 as the rootfs and
|
||
don't worry about /persist, we can skip that step.
|
||
|
||
|
||
|
||
|
||
[ aside: I think we may be putting two busyboxes in the image:
|
||
see modules/s6/default.nix s6-init-scripts has buildInputs = [busybox]; ]
|
||
|
||
Mon Apr 3 18:34:26 BST 2023
|
||
|
||
suppose
|
||
- we boot the system with systemConfig=/nix/store/eeeeee-system
|
||
- the early-init script runs /target/$systemConfig/create-root /target
|
||
after mounting /target
|
||
- then it runs chroot /target $systemConfig/bin/init "$@"
|
||
|
||
or maybe we could combine those steps?
|
||
or maybe it doesn't matter too much ...
|
||
|
||
Thu Apr 6 21:25:41 BST 2023
|
||
|
||
what now?
|
||
|
||
- put a jffs2 onto some hardware device
|
||
- what do we do with uboot?
|
||
- should we pad the kernel?
|
||
- maybe kernel module support would be good if we're making it
|
||
hard to do kernel updates
|
||
- try the nix-copy-closure thing and work out what else we don't know
|
||
- [done] detect endian correctly
|
||
|
||
|
||
to ask a different question, what else do we need to dogfood a router?
|
||
|
||
Sun Apr 9 10:06:08 BST 2023
|
||
|
||
- rename outputs.flashable to outputs.flashimage
|
||
- rename modules/flashable to modules/flashable_ro
|
||
- create outputs.flashable in modules/jffs2
|
||
- rename modules/jffs2 to modules/flashable_rw
|
||
- add enable config to both?
|
||
- enable kernel module compilation
|
||
|
||
|
||
Mon Apr 10 23:50:41 BST 2023
|
||
|
||
- initramfs parses /proc/cmdline to find root fs, might not play
|
||
nice with defaulting
|
||
|
||
- how to build kernel modules
|
||
|
||
- look at closure size, is it this big because we've broken it
|
||
or is jffs2 usually this much bigger than squashfs
|
||
|
||
- maybe squashfs with overlay might be better if we could
|
||
ensure hardlinks?
|
||
|
||
- maybe there's something like overlayfs but content-addressable?
|
||
|
||
Sat Apr 15 18:57:46 BST 2023
|
||
|
||
for the same configuration:
|
||
|
||
-r--r--r-- 1 root root 6066176 Jan 1 1970 /nix/store/0x271rg45mcjjgbma9wi31h1yd109fpy-frob-squashfs
|
||
-r--r--r-- 1 root root 12255232 Jan 1 1970 /nix/store/zx11adagcbzqsnqkyz5kgvr392vhlrpr-make-jffs2
|
||
|
||
may want to reconsider not using squashfs with overlay
|
||
|
||
Wed Apr 19 22:22:48 BST 2023
|
||
|
||
Where next?
|
||
|
||
Sun Apr 23 18:24:34 BST 2023
|
||
|
||
- we are down to ~ 11MB image for a barely functional (IPV4) router
|
||
this is by avoiding all dependencies on openssl or gnutls
|
||
- rotuer is not recognising when I set the hostname
|
||
- I may have forgotten the root password :-(
|
||
- why is hello world 70K unless hardeningDisable?
|
||
|
||
Fri Apr 28 20:51:52 BST 2023
|
||
|
||
To do nix-copy-closure we need nix-store, which is a symlink to nix,
|
||
which is
|
||
|
||
-rwxr-xr-x 1 dan users 2.3M Apr 28 21:08 nix
|
||
|
||
(stripped). This is a lot bigger than, say, a simple script to
|
||
loop through the closure of a derivation and copy only the store
|
||
folders that don't exist already.
|
||
|
||
* we'd like to only transmit the packages that aren't already present
|
||
|
||
* we'd like to use a single ssh connection
|
||
|
||
|
||
S: here is a list of package names
|
||
C: these are the names of the packages I want
|
||
S: here are the packages
|
||
|
||
while read $f ; do
|
||
test -d $f || echo $f
|
||
end
|
||
|
||
Tue May 2 21:53:08 BST 2023
|
||
|
||
1) we have a script that runs on the receiver, which
|
||
|
||
- accepts a list of store paths
|
||
- prints the missing store paths
|
||
- runs cpio -i < stdio
|
||
|
||
2) we need a script for the sender that
|
||
|
||
- refs=$(nix-store -q --references $1 && echo end)
|
||
- opens ssh connection
|
||
- print ssh $refs
|
||
- needed= capture result until "end" received
|
||
- find needed | cpio -o > ssh-connection
|
||
- close connection
|
||
|
||
3) to have a reasonable hope of testing this we should do it with qemu. It would be nice
|
||
if we could connect without faff to the qemu lan interface : either we do this by bringing up
|
||
another qemu vm (preferably with the host store shared, otherwise it has to build a mips cross
|
||
compiler/libc) or maybe we could do something unholy with ssh ProxyCommand
|
||
|
||
ssh -o ProxyCommand "socat - UDP4-DATAGRAM:230.0.0.1:1234,sourceport=1234,reuseaddr,ip-add-membership=230.0.0.1:127.0.0.1"
|
||
|
||
|
||
|
||
4) we haven't solved garbage collection, though I think "remove everything not in
|
||
nix-path-registration" might be what's needed there
|
||
|
||
Wed May 3 22:01:19 BST 2023
|
||
|
||
Something weird is going on with qemu net device enumeration: when I
|
||
run it interactively I'm getting the access network (mac ending :02)
|
||
on eth0 and the lan (mac ending :01) on eth1, and if it's behaving the
|
||
same in CI then how come any of the tests work? vanilla-confinguration.nix
|
||
definitely assumes lan=eth0
|
||
|
||
By switching from -device virtio-net-pci to -device virtio-net then
|
||
I get the desired behaviour back
|
||
|
||
Sat May 6 18:42:28 BST 2023
|
||
|
||
Next:
|
||
|
||
- package min-copy-closure
|
||
- see if we can use it on some output to copy the whole system closure
|
||
- post-copying symlink munging
|
||
- try it on a real device, see if it works for config file updates
|
||
- collect-garbage/delete-old-generation
|
||
|
||
|
||
Sun May 7 23:03:03 BST 2023
|
||
|
||
Shortly after all the work to reduce system closure size last time, I
|
||
tried adding the necessary packages to support nix-copy-closure and
|
||
saw it start building a complete C++ system with Boost. My fears that
|
||
this would lead to quite a large increase in the system size were, it
|
||
turned out, entirely founded.
|
||
|
||
So I wrote my own - or at least, a quite minimal substitute. The core
|
||
logic is simple - on the sender, we get the list of required packages,
|
||
then we check for the existence of `/nix/store/eeeeeee-foo` for
|
||
each of them on the target, and whatever's missing we send across the
|
||
link using cpio.
|
||
|
||
It sounds simple, and it should be simple, and in retrospect it _was_
|
||
simple. Along the way I went on a bit of a Qemu networking tangent and
|
||
learned quite a lot about the bash `coproc` command
|
||
|
||
Tue May 9 21:06:53 BST 2023
|
||
|
||
General direction of my thoughts:
|
||
|
||
- get a baseline working rotuer system
|
||
- prove that min-copy-closure works with it
|
||
- refactor the crap out of it
|
||
- configurablise the bordervm usb ethernet setup
|
||
- when we have a good idea of how/whether min-copy-closure *actually*
|
||
works, declare "writeable filesystem" to be done
|
||
- start to get more of a feel for how the services/config hang together
|
||
|
||
? why does rotuer not have a hostname?
|
||
|
||
? how can we get a device hooked up to rotuer's lan port that we can
|
||
control remotely
|
||
|
||
Sun May 14 23:25:46 BST 2023
|
||
|
||
the outputs.systemConfiguration attribute builds a derivation
|
||
containing a single file bin/activate
|
||
|
||
_Presumably_, copying its closure will copy all the things, as
|
||
we already use it as the roots for jffs2 creation. However, there
|
||
is also a symlink created from /init at jffs2 creation
|
||
|
||
Mon May 15 21:32:38 BST 2023
|
||
|
||
Had a neat idea about uing an overlayfs combining jffs2 and ramfs
|
||
to do upgrades that would otherwise be larger than the flash.
|
||
Could use "overlay merge" from https://github.com/kmxz/overlayfs-tools
|
||
|
||
Wed May 17 15:18:55 BST 2023
|
||
|
||
liminix-rebuild doesn't collect garbage (this is a mising feature, not
|
||
a bug). We think we can fix this using nix-path-registration: specifically,
|
||
by deleting anything not in it.
|
||
|
||
What we're going to do: build a fresh system image for rotuer, then
|
||
dogfood liminix-rebuild until we've succeeded in getting it to
|
||
change its hostname
|
||
|
||
Also wondering if we should drop outputs.default, but maybe not
|
||
|
||
* systemConfiguration: used for updates
|
||
* vmroot: used for qemu
|
||
* flashimage: used for flashing
|
||
* tftproot: used for dev/test
|
||
|
||
As long as we're consistently setting the default output to whichever
|
||
is the appropriate "full production image" I think we're good.
|
||
|
||
Wed May 17 22:45:40 BST 2023
|
||
|
||
Random thought: when we bind mount /target/persist/nix to /target/nix
|
||
we could make it read-only. worth doing?
|
||
|
||
Thu May 18 10:59:39 BST 2023
|
||
|
||
- liminix-rebuild can't find reboot: probably the PATH is just
|
||
generally wrong for ssh sessions (maybe all non-login sessions?)
|
||
|
||
- need to copy path registration file somewhere useful and
|
||
delete stuff not in it at the appropriate time. Would be safest
|
||
to do that either late in the shutdown process before rebooting,
|
||
or during boot.
|
||
|
||
Fri May 19 15:18:13 BST 2023
|
||
|
||
If we make min-collect-garbage - just a command you can run whenever -
|
||
that will be fine for current capabilities. It won't work with the
|
||
theoretical overlayfs system, though: we need to copy-down from the
|
||
ramfs to real flash before rebooting, and that can't happen until
|
||
there's disk space to do it
|
||
|
||
Sat May 20 22:35:25 BST 2023
|
||
|
||
We have a working min-collect-garbage (seems to, anyway ...)
|
||
|
||
- having ssh host key wiped on reboot is sucky. maybe we can have
|
||
/persist/secrets and a service that looks there?
|
||
|
||
- find out what files ash sources on non-login shell startup
|
||
[ set ENV=/etc/ashrc in parent process env ]
|
||
|
||
- services.default is suboptimal as there is no way to add to it
|
||
without wiping it
|
||
|
||
- decide whether to use liminix- or min- as our prefix for nixy
|
||
commands
|
||
|
||
- should we move config.outputs -> config.system.outputs ? see Mar 28
|
||
|
||
- less crap firewall
|
||
|
||
- add ipv6 support to rotuer
|
||
|
||
- create an l2tp configuration
|
||
|
||
- iperf and tuning
|
||
|
||
- wlan country code
|
||
|
||
|
||
dropbear weak hashes? https://github.com/mkj/dropbear/issues/138
|
||
|
||
Sun May 21 11:48:07 BST 2023
|
||
|
||
dropbear will generate host keys on first connection. It's (probably) good that the
|
||
key is generated on-device and also that we wait until there's some randomness.
|
||
It's not so good that it will only write the key to DSS_PRIV_FILENAME which is
|
||
hardcoded to /run
|
||
|
||
Sun May 21 17:27:31 BST 2023
|
||
|
||
What do we need for ipv6?
|
||
|
||
- upgrade ppp to something with an ipv6-up-script option, move ppp and pppoe derivations into their own files
|
||
- get ipv6 address from pppoe
|
||
- get ipv6 delegation from DHCPv6
|
||
- support dhcp6 in dnsmasq, and advertise prefix on lan
|
||
- firewall settings
|
||
|
||
Sun May 21 21:30:17 BST 2023
|
||
|
||
Making hydra build the docs is straightforward, but making it
|
||
_publish_ the docs is outside scope, really. It can serve the files
|
||
but they're all text/plain
|
||
|
||
Should hydra push the docs to www.liminix.org or should www.liminix.org
|
||
pull?
|
||
|
||
TODO-at-some-point: assign uids and gids dynamically, somehow
|
||
|
||
Tue May 23 22:56:33 BST 2023
|
||
|
||
following the guidance at https://support.aa.net.uk/IPv6:
|
||
|
||
we run odhcp6c to do router solicitation/advertisement dance
|
||
|
||
|
||
odhcp6c environment variables:
|
||
|
||
RA_ADDRESSES=
|
||
RA_REACHABLE=0
|
||
CER=
|
||
PASSTHRU=00170020200108b0000000000000000000002020200108b0000000000000000000002021
|
||
SERVER=fe80::203:97ff:fed6:0
|
||
RA_MTU=0
|
||
RA_ROUTES=::/0,fe80::203:97ff:fed6:0,65535,512
|
||
OPTION_1=00030001e4956e4ef2fa
|
||
NTP_FQDN=
|
||
OPTION_2=00030001000397d60000
|
||
RA_DOMAINS=
|
||
DOMAINS=
|
||
AFTR=
|
||
SIP_IP=
|
||
NTP_IP=
|
||
PREFIXES=2001:8b0:de3a:40dc::/64,7198,7198
|
||
RA_HOPLIMIT=64
|
||
RA_DNS=
|
||
RDNSS=2001:8b0::2020 2001:8b0::2021
|
||
SNTP_IP=
|
||
RA_RETRANSMIT=0
|
||
SIP_DOMAIN=
|
||
ADDRESSES=2001:8b0:1111:1111:0:ffff:51bb:4cf2/128,3598,7198
|
||
|
||
# ip -6 route |grep default
|
||
default via fe80::203:97ff:fed6:0 dev ppp0 metric 1024 expires 65211sec
|
||
|
||
presumably from RA_ROUTES but why is the metric appaently doubled?
|
||
|
||
Tue May 30 21:25:37 BST 2023
|
||
|
||
We have an odhcpc script that preserves the prefix delegation from the
|
||
ISP. We need a service that notices whenever the state is
|
||
available/has changed, and updates the LAN IPv6 address.
|
||
|
||
The service can depend on odhcp
|
||
|
||
add inotify to packages
|
||
use writeFennelScript with that dep
|
||
see if it works
|
||
|
||
Wed May 31 23:33:00 BST 2023
|
||
|
||
We have a thing that sets ipv6 address on lan interface, yay us
|
||
|
||
A firewall would be a very good idea
|
||
|
||
Thu Jun 1 18:46:59 BST 2023
|
||
|
||
TODO for now:
|
||
|
||
- services.default is suboptimal as there is no way to add to it
|
||
without wiping it
|
||
|
||
- decide whether to use liminix- or min- as our prefix for nixy
|
||
commands
|
||
|
||
- should we move config.outputs -> config.system.outputs ? see Mar 28
|
||
|
||
- less crap firewall
|
||
|
||
- create an l2tp configuration
|
||
|
||
- iperf and tuning
|
||
|
||
- wlan country code
|
||
|
||
Thu Jun 1 21:26:37 BST 2023
|
||
|
||
how can a client machine "opt out" of using the firewall, to allow
|
||
incoming connections? Most convenient would be to have a separate SSID
|
||
for grownups. Assuming it shows up as a separate wlan device, we can
|
||
write firewall rules to allow incoming connections on that interface
|
||
(can we? only if the packet is identifiable as destined for that interface)
|
||
|
||
https://www.rfc-editor.org/rfc/rfc6092.html
|
||
https://emailstuff.org/rfc/rfc7084
|
||
|
||
We could block incoming for slaac and dhcp addresses and permit it for
|
||
stable private addresses. If we were fairly sure that devices won't
|
||
ask for stable private addresses just for funsies.
|
||
|
||
https://wiki.archlinux.org/title/IPv6_#Stable_private_addresses
|
||
|
||
|
||
|
||
Fri Jun 2 14:42:43 BST 2023
|
||
|
||
I found a handy guide to nftables at https://ww.telent.net/2023/6/2/turning_the_nftables
|
||
|
||
Mon Jun 5 16:56:44 BST 2023
|
||
|
||
|
||
How are we going to do this firewall thing then?
|
||
I can see no reason to have more than one table per family, so lets
|
||
just name the tables after families
|
||
|
||
There is nothing in nftables for functionally grouping rules by
|
||
requirement that may touch multiple hooks/chains, so we need our own
|
||
abstraction - and we can't call it any name that nftables uses already
|
||
(so, not "ruleset"). rulegroup?
|
||
|
||
"policy" would be a good name except that it's already taken
|
||
|
||
"concern"? "requirement"? "feature"?
|
||
|
||
Mon Jun 19 20:45:48 BST 2023
|
||
|
||
why is chrony using libedit?
|
||
|
||
Thu Jun 22 09:52:57 BST 2023
|
||
|
||
- There is a lot more lua being installed (luac, docs, static
|
||
libraries etc) than we really need.
|
||
|
||
- update User docs to include a list of supported targets
|
||
|
||
Thu Jun 22 23:43:06 BST 2023
|
||
|
||
- is there a sysfs to enable ipv6 forwarding?
|
||
- we haven't an ipv4 firewall yet
|
||
|
||
|
||
PATH=`echo /nix/store/*nftables*/bin`:$PATH
|
||
nft list ruleset
|
||
|
||
Thu Jun 22 23:58:58 BST 2023
|
||
|
||
Looks like we're missing at least one kernel config setting for
|
||
nftables. Would this be a good time to do a derivation for building
|
||
kernel modules?
|
||
|
||
|
||
Sun Jul 9 21:21:17 BST 2023
|
||
|
||
|
||
Tue Jul 11 22:10:17 BST 2023
|
||
|
||
- s6 cheatsheet, find or write
|
||
- could we have > 1 module add to services.default?
|
||
- odhcp should parse values from environ and write more files, to save readers
|
||
from parsing it
|
||
- pkgs.liminix, who knows what thats for any more?
|
||
- interface.device, as a general rule, doesn't work because the
|
||
device name may be known only at runtime (e.g. for ppp)
|
||
- iperf
|
||
- figure out wifi regdomain
|
||
|
||
Tue Jul 11 23:01:59 BST 2023
|
||
|
||
We can make services depend on kernel modules, however not on bakedin
|
||
kernel config
|
||
|
||
[from March: "Let's think about services and modules."]
|
||
|
||
Module
|
||
+ can change global config
|
||
* add users, groups etc
|
||
* change kernel config
|
||
* change busybox config
|
||
+ well-typed parameters
|
||
- is a "singleton": can't have the same module included twice
|
||
with different config. e.g. can't have two hostap modules running on
|
||
different wlan radios.
|
||
- can't express dependencies: a depends on b
|
||
|
||
thought I had then was: modules provide services. requiring the
|
||
ppp module causes config.services.ppp to exist, so you can
|
||
|
||
services.default = [
|
||
(config.services.ppp {
|
||
tty = "17";
|
||
baud = "57600";
|
||
secrets = blah;
|
||
})
|
||
...
|
||
]
|
||
|
||
this might work. also though we should find out how to do type checking on
|
||
service params
|
||
|
||
Wed Jul 12 23:23:02 BST 2023
|
||
|
||
https://github.com/NixOS/mobile-nixos/pull/406 // why mobile nixos uses
|
||
mobile.outputs instead of system.build
|
||
|
||
suggests that system.build may not be a thing to blindly emulate
|
||
|
||
if a service is a derivation should we expect to want to be able to call
|
||
it with .override? maybe we want to override the package containing the
|
||
daemon it runs. How do we best pass service config as well?
|
||
|
||
Maybe a service template is a function that returns a derivation
|
||
|
||
|
||
imports = [ ./modules/pqmud.nix ];
|
||
services.mud = system.services.pqmud {
|
||
realm = "A deep cavern";
|
||
port = 4067;
|
||
users = import ./allowed-users.nix;
|
||
# etc etc
|
||
};
|
||
services.mudBeta = let mud =
|
||
system.services.pqmud {
|
||
realm = "A very deep cavern";
|
||
port = 4068;
|
||
users = import ./allowed-users.nix;
|
||
};
|
||
in mud.overrideAttrs { pqmud = pkgs.pkmudLatest; };
|
||
|
||
so we have
|
||
|
||
config.system.services # services provided by modules
|
||
config.system.outputs # build artefacts of various types
|
||
|
||
the services provided by a module must be introspectable in some way
|
||
so that we can compile a list of service options per module
|
||
|
||
service parameters are defined using the module type system.
|
||
Something like this?
|
||
|
||
# mud.nix
|
||
|
||
system.services.pqmud = args :
|
||
let t = {
|
||
name = mkOption { type = types.str; };
|
||
realm = mkOption { type = types.str; };
|
||
port = mkOption { type = types.port; default = 12345; };
|
||
users = mkOption { type = types.any; };
|
||
};
|
||
in assert isType (submodule { options = t; }) args; longrun {
|
||
inherit (args) name;
|
||
run = "${pkgs.pqmud}/bin/pqmud --port ${port} ....."
|
||
};
|
||
|
||
Fri Jul 14 19:07:59 BST 2023
|
||
|
||
It works for pppoe, though typechecking error messages could be
|
||
better.
|
||
|
||
- We need to find a good place to keep the typeCheck function so that
|
||
everyone can use it.
|
||
|
||
- also the type_service type defn exists only locally in modules.nix,
|
||
and we would like to refer to it elsewhere
|
||
|
||
Thu Aug 10 21:46:36 BST 2023
|
||
|
||
to finish service/modules milestone
|
||
|
||
[done] there are some modules not using serviceDefn
|
||
- modules included by standard.nix should have all their options
|
||
grouped together in docs
|
||
how can we determine which they are? or maybe "modules that
|
||
don't contain services" is an acceptable criterion
|
||
maybe this is not actually an issue, if the modules are
|
||
reasonably coherent. It looks odd now because base.nix is a mess
|
||
[done] print the module pathname so people know what to import
|
||
[done] docs don't print the examples
|
||
[check?] and seem to be getting the default wrong too
|
||
- decide what we deem to be "internal" (if anything)
|
||
is `filesystem` internal, for example? or `busybox`? they're
|
||
both mostly _used_ internally but may still be valuable to expose
|
||
[done] maybe document outputs separately or not at all?
|
||
[done] bridge to be one service instead of two?
|
||
[done] get rid of services/
|
||
- anything else in rotuer.nix that we should servicify
|
||
- services for liminix.networking
|
||
- a nice way to specify service dependencies
|
||
[done] - do another video
|
||
|
||
Mon Aug 21 20:02:55 BST 2023
|
||
|
||
a nice way to do dependencies would be somethng like
|
||
|
||
services.thething =
|
||
let s = svc.thing { .... };
|
||
in addDependencies s (with config.services; [otherthing yetanother]);
|
||
|
||
except that addDependencies is a really klunky name. dependsOn is very
|
||
slightly better? or maybe it could be a function of the derivation?
|
||
|
||
services.thething =
|
||
svc.thing { .... }.depends (with config.services; [otherthing yetanother]);
|
||
|
||
---
|
||
|
||
what does it mean to be dependent on an interface? that's it up? running?
|
||
has an address? has a collection of addresses?
|
||
|
||
|
||
services.defaultroute4 = route {
|
||
name = "defaultroute4";
|
||
via = "$(output ${services.wan} address)";
|
||
target = "default";
|
||
dependencies = [ services.wan ];
|
||
};
|
||
|
||
- this route requires the interface to have an address (if wan is an
|
||
interface, anyway ...)
|
||
|
||
- but otoh a dhcp client doesn't want to wait for an address, because
|
||
it is assigning the address.
|
||
|
||
should an address provider have "interface name" as an output?
|
||
is there a set of outputs that every address provider should have -
|
||
whether static, dhcp, pppoe?
|
||
|
||
maybe we're in decision paralysis and should just move forward with
|
||
what we know
|
||
|
||
Wed Aug 23 18:56:08 BST 2023
|
||
|
||
We may want to change the hardware device files to specify network
|
||
interface names not services. Otherwise hardware devices (boards)
|
||
depend on module-based-services, which is a bit weird.
|
||
|
||
Thu Aug 24 18:54:03 BST 2023
|
||
|
||
- we want network and bridge to be separate modules, because bridge
|
||
introduces extra kernel config
|
||
|
||
- bridge/service wants to create a network device ("ip link"),
|
||
using quite similar code as network/link.nix
|
||
|
||
- but bridge/service is a derivation: it has sight of pkgs but not
|
||
config
|
||
|
||
offtopic: useful s6-rc commands at https://www.skarnet.org/software/s6-rc/faq.html
|
||
|
||
Fri Aug 25 23:37:57 BST 2023
|
||
|
||
where we left off: bridge is a bundle, and bundles can't have outputs,
|
||
so how do we set the ifname of the bridge?
|
||
|
||
- ifname of the primary is set
|
||
- actually, most things that depend on the bridge really just depend
|
||
on the primary anyway (it's OK if 1 <= n < #members are down)
|
||
- but *something* should depeond on all the members
|
||
|
||
turns out maybe we needed two services after all?
|
||
|
||
Sun Aug 27 23:50:18 BST 2023
|
||
|
||
I've done enough to make rotuer build, but in the process
|
||
trashed vanilla-configuration as I entirely forgot we don't have
|
||
a dhcpv4 client service. Need to fix that ...
|
||
|
||
- anything else in rotuer.nix that we should servicify
|
||
- anything in vanilla-configuration ditto
|
||
- and arhcive (rsync, watchdog)
|
||
- services for liminix.networking
|
||
- tidy up the dependency handling in serviceDefn build
|
||
(interface is fine, implementation is a bit brutal)
|
||
- write a blog entry
|
||
|
||
Mon Aug 28 16:58:49 BST 2023
|
||
|
||
- [done] ntp is not setting the time
|
||
- nftables syntax error
|
||
|
||
Thu Aug 31 23:53:54 BST 2023
|
||
|
||
- anything else in rotuer.nix that we should servicify
|
||
[done] - packet forwarding
|
||
- dhcp6 client
|
||
- what to do with acquire-{wan,lan} scripts?
|
||
- resolvconf
|
||
- [done] anything in vanilla-configuration ditto
|
||
- packet forwarding
|
||
- and arhcive
|
||
- [not doing] rsync
|
||
- [done] watchdog
|
||
- [done] mount
|
||
- nftables syntax error
|
||
- tidy up the dependency handling in serviceDefn build
|
||
(interface is fine, implementation is a bit brutal)
|
||
- [done] services for liminix.networking
|
||
- [done] write a blog entry
|
||
- [done] ntp is not setting the time
|
||
- [done] static dhcp(6) lease support reqd for dogfooding
|
||
|
||
Sat Sep 2 21:35:41 BST 2023
|
||
|
||
Considerations for "mount" service: each filesystem needs to depend on
|
||
any mount points for its parent directories, and maybe also on other
|
||
services (e.g. filesystem modules, network devices, routes)
|
||
|
||
mountpoints = {
|
||
mnt = {
|
||
media = svc.mountpoint.build {
|
||
fstype = "msdos";
|
||
device = "/dev/sda1";
|
||
options = [ ...];
|
||
};
|
||
archive = svc.mountpoint.build {
|
||
fstype = "ext4";
|
||
device = "/dev/sda2";
|
||
options = [ ...];
|
||
mountpoints = {
|
||
remote = svc.mountpoint.build {
|
||
fstype = "nfs";
|
||
device = "doc.ic.ac.uk:/public";
|
||
};
|
||
};
|
||
};
|
||
};
|
||
}
|
||
|
||
services.somethingelse = svc.ftpd.build {
|
||
# ...
|
||
dependencies = [ mountpoints.mnt.archive ];
|
||
}
|
||
|
||
what don't we like about this? we have to walk the nested attrset in a
|
||
weird way, because the services may contain other mountpoints. Maybe
|
||
just keep it simple and do
|
||
|
||
|
||
services.mountpoints = bundle {
|
||
name = "mountpoints";
|
||
contents = [
|
||
svc.mountpoint.build {
|
||
device = "/dev/sda2"; fstype = "ext4"; directory = "/mnt/isos";
|
||
};
|
||
svc.mountpoint.build {
|
||
device = "/dev/sdb1"; fstype = "msdos"; directory = "/mnt/backup";
|
||
dependencies = [ load-vfat-module ];
|
||
};
|
||
];
|
||
}
|
||
|
||
Sun Sep 3 17:34:36 BST 2023
|
||
|
||
how to dogfood
|
||
|
||
DHCP6 server: static lease support
|
||
DHCP client and acquire-{lan-prefix,wan-address}
|
||
|
||
The emergency boot thingy in glinet u-boot won't help because it
|
||
expects to flash from its tftp request instead of booting it. So we
|
||
could use kexec instead except that the openwrt install doesn't have
|
||
it. So we could swap the hardware devices, the only downside of that
|
||
being that then I don't have a test system any more. Or we could YOLO it.
|
||
|
||
Sun Sep 3 22:11:02 BST 2023
|
||
|
||
I think we should rejigger the documentation ...
|
||
|
||
- "getting started": worked example, building and installing Liminix
|
||
with a very simple config (wifi AP with ssh daemon)
|
||
|
||
- using modules
|
||
- link to module reference
|
||
|
||
- creating custom services
|
||
- longrun or oneshot
|
||
- dependencies
|
||
- outputs
|
||
|
||
- creating your own modules
|
||
|
||
- hacking on Liminix itself
|
||
|
||
- contributing
|
||
|
||
- external links and resources
|
||
|
||
- module reference
|
||
|
||
- hardware device reference
|
||
|
||
---
|
||
|
||
I think we might rename wlan_24 to wlan and wlan_5 to wlan1.
|
||
This is on the assumption that almost no device is 5GHz only, so
|
||
would make it easier to write a basic wlan example that works
|
||
both on 2.4GHz boards and dual radio boards
|
||
|
||
Mon Sep 4 23:15:26 BST 2023
|
||
|
||
If dhcpcd parsed the update-script output into separate files, half
|
||
the complexity of acquire-lan-prefix would go away. The other half is
|
||
because it subscribes to changes in the outputs instead of just
|
||
running once. Perhaps there's a better way to do that?
|
||
|
||
Could separate prefixes and addresses something like this...
|
||
|
||
outputs/prefix/2001\:8b0\:de3a\:40dc\:\:/prefix
|
||
outputs/prefix/2001\:8b0\:de3a\:40dc\:\:/length
|
||
outputs/prefix/2001\:8b0\:de3a\:40dc\:\:/preferred
|
||
outputs/prefix/2001\:8b0\:de3a\:40dc\:\:/valid
|
||
outputs/prefix/2001\:8b0\:de3a\:80\:\:/prefix
|
||
outputs/prefix/2001\:8b0\:de3a\:80\:\:/length
|
||
outputs/prefix/2001\:8b0\:de3a\:80\:\:/preferred
|
||
outputs/prefix/2001\:8b0\:de3a\:80\:\:/valid
|
||
|
||
the directory name is arbitrary as long as it's unique. Might even be better to
|
||
remove the colons
|
||
|
||
outputs/prefix/200108b0de3a40dc/valid
|
||
|
||
or we could adopt the MS convention and replace with hyphens
|
||
|
||
outputs/prefix/2001-8b0-de3a-40dc--/prefix
|
||
|
||
Also: we should write some kind of test for this...
|
||
|
||
|
||
Tue Sep 5 21:36:39 BST 2023
|
||
|
||
How do we set the cpu governor?
|
||
|
||
|
||
Fri Sep 8 21:26:36 BST 2023
|
||
|
||
We want a fennel thing that reads a filesystem tree into a nested
|
||
table. And a thing to diff two tables
|
||
|
||
Sat Sep 9 22:40:50 BST 2023
|
||
|
||
Subscribers to odhcp6c outputs need to be able to tell which addresses
|
||
are new and which have been removed since the last run, which now we
|
||
have ohdcp-script producing parsed data means they need to compare
|
||
tables by value. Which is a faff.
|
||
|
||
What if the directory name were a hash of all the relevant fields
|
||
such that clients could just say "new directory, must be new address"
|
||
|
||
We can have literal prefix, then need to encode
|
||
length,preferred,valid,extra space-efficiently. I cannot currently see
|
||
any way to use whatever hashing Lua uses for its table lookups,
|
||
which is a bit disapppointing, so we might have to make our own
|
||
|
||
|
||
https://gist.github.com/scheler/26a942d34fb5576a68c111b05ac3fabe
|
||
this is DJBHash, though doesn't appear to deal with integer overflow
|
||
|
||
|
||
function hash(str)
|
||
h = 5381;
|
||
|
||
for c in str:gmatch"." do
|
||
h = ((h << 5) + h) + string.byte(c)
|
||
end
|
||
return h
|
||
end
|
||
|
||
|
||
Mon Sep 11 20:31:25 BST 2023
|
||
|
||
acquire-lan/wan-foo have no tests, and the test setup is a bit of a
|
||
faff as they are both waiting on the filesystem
|
||
|
||
also, testing lua scripts is a faff without splitting them into
|
||
script/module
|
||
|
||
am wondering if we could do some kind of convention that we only write
|
||
modules not scripts but something in the fennel->lua can call the
|
||
module's `run` method.
|
||
|
||
Tuesday
|
||
|
||
Here is a working shebang for write-fennel:
|
||
|
||
#!/nix/store/5iwv3h2jjbk2vib2bpwx3g9knpb02x3y-lua-5.3.6/bin/lua -e dofile(arg[0]).run()
|
||
|
||
Tue Sep 12 20:47:52 BST 2023
|
||
|
||
We don't handle unbound or stopped states in odhcp consumers. I think
|
||
probably we should do this in odhcp-script by deleting the outputs,
|
||
rather than making each consumer do it.
|
||
|
||
... turns out that odhcp6c itself unsets ADDRESSES and PREFIXES before
|
||
calling the script with "unbound", so maybe we don't need to do
|
||
anything special.
|
||
|
||
Wed Sep 13 17:55:33 BST 2023
|
||
|
||
|
||
|
||
@400000000000001f2723b3cb eth1.link.pppoe Script /nix/store/nyks8zl86dcp44k5sjcc76digrnfgm17-ip-up finished (pid 403), status = 0x0
|
||
@400000000000001f27b2db3b eth1.link.pppoe Script /nix/store/ds0lc4qd1zfiyxsva87rpplyr21awjh1-ip6-up finished (pid 404), status = 0x1
|
||
|
||
@400000000000001f30a7c5c5 /nix/store/v9ijgyywizqbbd9y73r2wifkxc0d1jjm-route-default-1a22c69d0e1f-up: line 4: input: not found
|
||
@400000000000001f31abf9b5 ip: command line is not complete, try "help"
|
||
@400000000000001f31ca1395 s6-rc: warning: unable to start service route-default-1a22c69d0e1f: command exited 1
|
||
@400000000000001f31f236b4 s6-rc: info: service route-default-d2586cf00da0 successfully started
|
||
@
|
||
|
||
|
||
Wed Sep 13 18:05:38 BST 2023
|
||
|
||
TODO
|
||
|
||
- service for dhcp6 client
|
||
- move acquire-{wan,lan} scripts out of examples/
|
||
- service for resolvconf
|
||
- nftables syntax error
|
||
- tidy up the dependency handling in serviceDefn build
|
||
(interface is fine, implementation is a bit brutal)
|
||
- docs
|
||
|
||
considerations:
|
||
|
||
1) in some ways, we should be able to specify acquire-{wan,lan} as if
|
||
they were just additional addresses on the respective
|
||
interfaces. However, they're longruns so the implementation of
|
||
"address" doesn't really fit.
|
||
|
||
2) should they be bundled into a dhcp client service? I think the
|
||
answer is "no" because which of the dhcp config we want to
|
||
honour locally (and how) is policy not mechainmsm
|
||
|
||
svc.dhcp6c.client.build { interface = wan; };
|
||
svc.dhcp6c.address.build {
|
||
inherit client;
|
||
interface = lan;
|
||
};
|
||
svc.dhcp6c.address.build {
|
||
inherit client;
|
||
interface = wan;
|
||
};
|
||
svc.dhcp6c.prefix.build {
|
||
inherit client;
|
||
interface = lan;
|
||
index = 1; # default to first interface
|
||
};
|
||
svc.dhcp6c.prefix.build {
|
||
inherit client;
|
||
interface = vpn;
|
||
index = 2;
|
||
};
|
||
|
||
|
||
|
||
Fri Sep 15 12:04:25 BST 2023
|
||
|
||
Qemu worked example provides dhcp and ssh service
|
||
|
||
Hardware worked example needs to be plugged into same lan as build
|
||
machine if we are going to tftp the image onto it - so it might be
|
||
awkward if we run dhcp on it
|
||
|
||
The device I have lying around is the A
|
||
|
||
How do we do the actual flash step? Assuming the device is running
|
||
stock firmware, from a laptop we can wifi to it and use the web ui to
|
||
upgrade
|
||
|
||
we can't build the hellonet config because it requires tftp
|
||
|
||
plug in mt300a
|
||
put stock firmware on it
|
||
|
||
Sun Sep 17 00:08:03 BST 2023
|
||
|
||
I don't think the user manual needs a full justification of why we
|
||
have the module/service split. Maybe we should have "decision records"
|
||
in the git tree instead
|
||
|
||
Sun Sep 17 16:44:31 BST 2023
|
||
|
||
Can we figure out which bits of the old doc are missing from the new
|
||
one and just transplant those? Then we can merge it sooner
|
||
instead of blocking on writig all the new stuff
|
||
|
||
Mon Sep 25 16:58:51 BST 2023
|
||
|
||
jffs2 on mt300a isn't finding root partition in initramfs, and it
|
||
seems to be because MTD_SPLIT_UIMAGE_FW isn't working
|
||
|
||
[ 0.426792] spi spi0.0: force spi mode3
|
||
[ 0.431305] spi-nor spi0.0: w25q128 (16384 Kbytes)
|
||
[ 0.436322] 5 fixed-partitions partitions found on MTD device spi0.0
|
||
[ 0.442875] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
|
||
[ 0.450400] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
|
||
[ 0.458208] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
|
||
[ 0.465751] OF: Bad cell count for /palmbus@10000000/spi@b00/flash@0/partitions
|
||
[ 0.473522] Creating 5 MTD partitions on "spi0.0":
|
||
[ 0.478466] 0x000000000000-0x000000030000 : "u-boot"
|
||
[ 0.484447] 0x000000030000-0x000000040000 : "u-boot-env"
|
||
[ 0.490888] 0x000000040000-0x000000050000 : "factory"
|
||
[ 0.497110] 0x000000050000-0x000000fd0000 : "firmware"
|
||
[ 0.596423] 0x000000ff0000-0x000001000000 : "art"
|
||
[ 0.611508] gsw: setting port4 to ephy mode
|
||
|
||
with squashfs root it's the same but for the extra split partitions:
|
||
|
||
[ 0.468715] Creating 5 MTD partitions on "spi0.0":
|
||
[ 0.473653] 0x000000000000-0x000000030000 : "u-boot"
|
||
[ 0.479652] 0x000000030000-0x000000040000 : "u-boot-env"
|
||
[ 0.486085] 0x000000040000-0x000000050000 : "factory"
|
||
[ 0.492318] 0x000000050000-0x000000fd0000 : "firmware"
|
||
[ 0.499304] 2 uimage-fw partitions found on MTD device firmware
|
||
[ 0.505457] Creating 2 MTD partitions on "firmware":
|
||
[ 0.510543] 0x000000000000-0x000000260000 : "kernel"
|
||
[ 0.516616] 0x000000260000-0x000000f80000 : "rootfs"
|
||
[ 0.522570] mtd: device 5 (rootfs) set to be root filesystem
|
||
[ 0.528565] 0x000000ff0000-0x000001000000 : "art"
|
||
|
||
turns out this is because the device thinks it has 4k erase block size
|
||
because MTD_SPI_NOR_USE_4K_SECTORS was set, and that was causing
|
||
mtdsplit to look in the wrong place for a root filesystem
|
||
|
||
Mon Sep 25 18:50:05 BST 2023
|
||
|
||
No, that wasn't it. Turned out to be an endianness-dependent check for
|
||
JFFS2 magic in mtdsplit.
|
||
|
||
setenv serverip 10.0.0.1
|
||
setenv ipaddr 10.0.0.8
|
||
tftp 0xa00000 result/uimage
|
||
bootm 0xa00000
|
||
|
||
Fri Sep 29 20:50:39 BST 2023
|
||
|
||
setenv bootargs 'liminix mtdparts=phram0:M(rootfs) phram.phram=phram0,0x40411f28,4194304,65536 memmap=4194304$0x40411f28 root=/dev/mtdblock0 console=ttyAMA0,115200 earlycon'
|
||
|
||
setenv serverip 10.0.0.1
|
||
setenv ipaddr 10.0.0.5
|
||
setenv bootargs 'liminix console=ttyS0,115200 panic=10 oops=panic earlycon=uart8250,mmio32,0x11002000 root=/dev/mtdblock0'
|
||
tftp 0x4007ff28 result/uimage ; tftp 0x40432f28 result/rootfs
|
||
bootm 0x4007ff28
|
||
|
||
setenv bootargs 'liminix console=ttyS0,115200 panic=1 oops=panic earlycon root=/dev/mtdblock0'
|
||
|
||
md 0x42ff0000
|
||
|
||
Cannot find regmap for /infracfg@10000000: -524.
|
||
|
||
# "console=ttyAMA0,38400 panic=10 oops=panic init=/bin/init loglevel=8 root=/dev/mtdblock0 rootfstype=squashfs fw_devlink=off"
|
||
|
||
|
||
40812468: 69726553 203a6c61 41424d41 304c5020 Serial: AMBA PL0
|
||
40812478: 55203131 20545241 76697264 3c0a7265 11 UART driver.<
|
||
40812488: 61723e33 706f6f6d 61203a73 6165726c 3>ramoops: alrea
|
||
40812498: 69207964 6974696e 7a696c61 3c0a6465 dy initialized.<
|
||
408124a8: 61723e34 706f6f6d 70203a73 65626f72 4>ramoops: probe
|
||
408124b8: 20666f20 66663234 30303030 6d61722e of 42ff0000.ram
|
||
408124c8: 73706f6f 69616620 2064656c 68746977 oops failed with
|
||
408124d8: 72726520 2d20726f 3c0a3232 61433e33 error -22.<3>Ca
|
||
408124e8: 746f6e6e 6e696620 65722064 70616d67 nnot find regmap
|
||
408124f8: 726f6620 6e692f20 63617266 31406766 for /infracfg@1
|
||
40812508: 30303030 3a303030 32352d20 333c0a34 0000000: -524.<3
|
||
40812518: 6e61433e 20746f6e 646e6966 67657220 >Cannot find reg
|
||
MT7622>
|
||
40812528: 2070616d 20726f66 666e692f 66636172 map for /infracf
|
||
40812538: 30314067 30303030 203a3030 3432352d g@10000000: -524
|
||
40812548: 3e333c0a 6e6e6143 6620746f 20646e69 .<3>Cannot find
|
||
40812558: 6d676572 66207061 2f20726f 72666e69 regmap for /infr
|
||
40812568: 67666361 30303140 30303030 2d203a30 acfg@10000000: -
|
||
40812578: 0a343235 433e333c 6f6e6e61 69662074 524.<3>Cannot fi
|
||
40812588: 7220646e 616d6765 6f662070 702f2072 nd regmap for /p
|
||
40812598: 63697265 31406766 32303030 3a303030 ericfg@10002000:
|
||
408125a8: 32352d20 313c0a34 616e553e 20656c62 -524.<1>Unable
|
||
408125b8: 68206f74 6c646e61 656b2065 6c656e72 to handle kernel
|
||
408125c8: 67617020 20676e69 75716572 20747365 paging request
|
||
408125d8: 76207461 75747269 61206c61 65726464 at virtual addre
|
||
408125e8: 66207373 66666666 66666666 66666666 ss fffffffffffff
|
||
408125f8: 0a656666 4d3e313c 61206d65 74726f62 ffe.<1>Mem abort
|
||
|
||
|
||
CONFIG_SERIAL_8250_FSL=y
|
||
CONFIG_SERIAL_8250_MT6577=y
|
||
CONFIG_SERIAL_8250_NR_UARTS=3
|
||
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
|
||
CONFIG_SERIAL_DEV_BUS=y
|
||
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
|
||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||
CONFIG_SERIAL_OF_PLATFORM=y
|
||
|
||
Mon Oct 2 10:17:04 BST 2023
|
||
|
||
We have a bootable aarch64 kernel for the Belkin, but it does not
|
||
understand the memmap= parameter we're using to protect the
|
||
phram image from being used as general memory.
|
||
|
||
One option is to add a reserved-memory stanza in the device tree,
|
||
using u-boot "fdt" command, but we don't know the fdt address in u-boot
|
||
because it doesn't have any commands to parse the image and set
|
||
variables pointing at the sub-components. (There's iminfo, but it's
|
||
onyl human-readable)
|
||
|
||
Second option is to amend the dtb in the tftpboot module: this
|
||
would mean regenerating the uimage
|
||
|
||
Third option: for tftpboot do we _have_ to use FIT? maybe we could
|
||
grab the fdt as a separate tftp transaction
|
||
|
||
we need to apply kernel patch 9401911f2d9f89035f7acebab16e72d43d1282fb
|
||
to avoid using ioremap on sysem ram which is not allowed on arm
|
||
|
||
|
||
Tue Oct 3 14:15:38 BST 2023
|
||
|
||
Progress on Liminix ARM support. The device I'm starting with is
|
||
the Belkin RT3200 (also known as [Linksys E8450](https://openwrt.org/toh/linksys/e8450)) which seems to be a featureful piece of kit, and whioch I snagged for a
|
||
very good price on the Bay of E
|
||
|
||
# Where are we right now?
|
||
|
||
* we can TFTP boot it to userland
|
||
* ethernet works
|
||
|
||
## What else needs doing?
|
||
|
||
* it has dual band wifi with many interesting features. I've built the
|
||
|
||
* we're only running in RAM, probably need to add some kernel config
|
||
to support the flash
|
||
* initramfs support is not yet implemented
|
||
* the flash is NAND flash and it's quite large compared with the
|
||
existing Liminix devices, so we're going to add UBIFS which will
|
||
use it better than JFFS2 does
|
||
* all this work is on a branch and needs to be cleaned up a lot before
|
||
I'm letting it into main
|
||
|
||
## What have we found?
|
||
|
||
There are some significant differences between this and the MIPS
|
||
devices (yes, other than an entirely different architecture), mostly
|
||
to do with "legacy boot" support or the lack thereof. For example:
|
||
|
||
* there aren't any options like `MIPS_RAW_APPENDED_DTB` to glom
|
||
together a kernel and device tree (FDT), because the bootloader is
|
||
expected to be able to provide a FDT following "standards".
|
||
U-Boot will do this, provided that we use the newer "FIT" Uimage
|
||
format which allows a kernel and DTB and initrd to be combined in
|
||
the same container. (Sadly we can't use FIT everywhere because a
|
||
lot of MIPS devices use really old forks of U-Boot that don't
|
||
understand it)
|
||
|
||
* for tftpboot, on MIPS we use the `memmap` kernel command line option
|
||
to reserve some RAM for the root filesystem. On Arm there's no such
|
||
option, so we have to add a
|
||
[reserved-memory](https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml)
|
||
node in the device tree instead. Which means, given that we _only_
|
||
want to do this when tftp booting (the memory is wasted
|
||
otherwise), we have to rewrite the device tree in that
|
||
scenario.
|
||
|
||
* then it turns out that phram doesn't (didn't) work anyway, because
|
||
it calls ioremap() and [you can't use ioremap on system memory on ARM](https://lwn.net/Articles/409689/). In newer kernels this is
|
||
fixed: there is a [conditional](https://github.com/torvalds/linux/blob/master/drivers/mtd/devices/phram.c#L127) here to use whichever of ioremap or
|
||
memremap is appropriate for the memory passed to phram, but it looks
|
||
non-trivial to backport so I've gone for a [much less sophisticated approach](https://gti.telent.net/dan/liminix/commit/f7cd9c2b6e6c99a228e066b09e3febcf71c63fa1#diff-d8e355f1b2dcde7378ebb40c92cdd2ce3125753c)
|
||
|
||
* we're using [DSA](https://www.kernel.org/doc/Documentation/networking/dsa/dsa.txt) instead of the OpenWrt [swconfig](https://openwrt.org/docs/techref/swconfig) program. There was actually surprisingly little work needed to adjust to this.
|
||
|
||
|
||
Other than that, it was mostly the usual process of "did the kernel
|
||
crash silently, or has it just been unable to open a console device?".
|
||
In this regard, *one neat trick*: even though U-Boot on this device
|
||
doesn't support pstore, we can use it anyway if we don't do compression.
|
||
Enable
|
||
|
||
```
|
||
PSTORE = "y";
|
||
PSTORE_RAM = "y";
|
||
PSTORE_CONSOLE = "y";
|
||
PSTORE_DEFLATE_COMPRESS = "n";
|
||
```
|
||
|
||
then boot with `panic=3 oops=panic`, then when it resets use the
|
||
U_Boot `md` command to see what happened:
|
||
|
||
```
|
||
MT7622> md 0x42ff0000
|
||
42ff0000: 43474244 00000000 00000ff4 3d3d3d3d DBGC........====
|
||
42ff0010: 39342e31 36373031 500a442d 63696e61 1.491076-D.Panic
|
||
42ff0020: 50203123 31747261 3e363c0a 20505050 #1 Part1.<6>PPP
|
||
42ff0030: 20445342 706d6f43 73736572 206e6f69 BSD Compression
|
||
[....]
|
||
42ff0ca0: 20676e69 73756e75 6b206465 656e7265 ing unused kerne
|
||
42ff0cb0: 656d206c 79726f6d 3731203a 0a4b3832 l memory: 1728K.
|
||
42ff0cc0: 523e363c 2f206e75 74696e69 20736120 <6>Run /init as
|
||
42ff0cd0: 74696e69 6f727020 73736563 3e373c0a init process.<7>
|
||
```
|
||
|
||
Wed Oct 4 21:08:44 BST 2023
|
||
|
||
By randomly including chinks of the openwrt config we have made it
|
||
find the mt7915e on the pcie bus. I just don't yet know which bit of
|
||
the openwrt config it was.
|
||
|
||
It doesn't actually work yet though. 5GHz wifi gets calibration data
|
||
from the flash, so it is not going to work unless (1) we reflash the
|
||
firmware partition, or (2) we find another way to provide it
|
||
calibration data.
|
||
|
||
https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/401
|
||
|
||
Sat Oct 7 22:56:40 BST 2023
|
||
|
||
We're almost ready to merge the rt3200 support (it's not finished
|
||
but it mostly won't break mips) except for the uimage module
|
||
which needs all that FIT stuff, and the tftpboot contortions
|
||
to amend the dtb for memmap
|
||
|
||
For legacy uimage
|
||
|
||
1) add commandline params to dtb
|
||
2) objcopy fdt into vmlinux.elf
|
||
3) strip to raw image and compress
|
||
4) mkimage
|
||
|
||
|
||
For FIT uimage
|
||
|
||
1) add commandline params to dtb
|
||
2) strip to raw image and compress
|
||
3) create its file
|
||
4) mkimage
|
||
|
||
Do we still want to handle the no-dtb case? what about
|
||
standards-compliant boot, where u-boot is providing the dtb? No option
|
||
to provide a commandline in that case, but maybe also no need to.
|
||
|
||
For tftpboot, am undecided. We could use the dtb rewriting thing
|
||
everywhere, in the interest of consistency.
|
||
|
||
Mon Oct 9 20:45:54 BST 2023
|
||
|
||
we bumped the kernel entry point to the 32MB mark, as
|
||
|
||
(1) when using jffs2 (big rootfs image) it was clobbering the dtb at
|
||
the end of the filesystem
|
||
|
||
(2) it should be 2MB aligned anyway and wasn't
|
||
|
||
However, this has given us the next problem:
|
||
|
||
OF: fdt: Reserved memory: failed to reserve memory for node 'secmon@43000000': base 0x00000000430B
|
||
OF: reserved mem: OVERLAP DETECTED!
|
||
phram-rootfs (0x0000000040400000--0x0000000053a31488) overlaps with ramoops@42ff0000 (0x000000004)
|
||
Zone ranges:
|
||
DMA [mem 0x0000000040000000-0x000000005fffffff]
|
||
DMA32 empty
|
||
Normal empty
|
||
Movable zone start for each node
|
||
|
||
the end of that phram-rootfs region looks well sus.
|
||
|
||
[ turns out that decimal is not hex ]
|
||
|
||
Tue Oct 10 21:37:31 BST 2023
|
||
|
||
UBI bleurgh ...
|
||
|
||
The DTB for this device, and/or the OpenWrt installer, seems to
|
||
expect already that mtd4 is a UBI thing
|
||
|
||
mtdinfo -a says:
|
||
mtd4
|
||
Name: ubi
|
||
Type: nand
|
||
Eraseblock size: 131072 bytes, 128.0 KiB
|
||
Amount of eraseblocks: 1000 (131072000 bytes, 125.0 MiB)
|
||
Minimum input/output unit size: 2048 bytes
|
||
Sub-page size: 2048 bytes
|
||
OOB size: 64 bytes
|
||
Character device major/minor: 90:8
|
||
Bad blocks are allowed: true
|
||
Device is writable: true
|
||
|
||
<5>UBI: auto-attach mtd4
|
||
<5>ubi0: attaching mtd4
|
||
<5>ubi0: scanning is finished
|
||
<5>ubi0: attached mtd4 (name "ubi", size 125 MiB)
|
||
<5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
|
||
<5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
|
||
|
||
we made a volume using "ubimkvol /dev/ubi0 -N liminix -S 825"
|
||
|
||
and from ubinfo -a we can see
|
||
|
||
0 ubootenv
|
||
1 ubootenv2
|
||
2 recovery
|
||
3 boot_backup
|
||
4 liminix
|
||
|
||
Now we could use "ubiupdatevol /dev/ubi0_4 /path/to/ubifs.img"
|
||
to put a ubifs on that volume, but obviously we'd have to boot the
|
||
device into Liminix somehow first.
|
||
|
||
Alternatively in the build environment we could use ubinize to
|
||
create the entire image that can be flashed to MTD, but
|
||
|
||
- this will overwrite erase counters.
|
||
- we have to give it a config file that describes all the volumes,
|
||
and I'm guessing they need to match up with the existing ones
|
||
otherwise we trash the uboot env
|
||
|
||
|
||
Wed Oct 11 17:37:09 BST 2023
|
||
|
||
We can write ubi volumes from u-boot. Let's for the moment use
|
||
mkfs.ubifs and tftp those files to u-boot - we can figure out the
|
||
ubinize dance later
|
||
|
||
We need either
|
||
|
||
(a) to write an analogue of our jffs2 graft option for mkfs.ubifs, or
|
||
(b) to have a "cpio-like" mkfs.ubifs variant that reads filenames on stdin
|
||
and writes only those, or
|
||
(c) to create a "staging" directory during build with all the store folders that need to go into the filesystem
|
||
|
||
although the least elegant, option (c) is the simplest and probably
|
||
not even slow, at least by comparison with unpacking the kernel source
|
||
tarball
|
||
|
||
we used
|
||
uboot> tftpboot 0x40400000 result/rootfs
|
||
uboot> ubi write 40400000 liminix $filesize
|
||
|
||
then can use ubifsmount ubi0:liminix ; ubifsls / to check that it wrote
|
||
something valid. To boot this:
|
||
|
||
setenv serverip 10.0.0.1
|
||
setenv ipaddr 10.0.0.8
|
||
setenv bootargs 'liminix console=ttyS0,115200 panic=10 oops=panic init=/bin/init loglevel=8 root=ubi0:liminix rootfstype=ubifs fw_devlink=off'
|
||
tftpboot 0x4007ff28 result/uimage
|
||
bootm 0x4007ff28
|
||
|
||
The other thing we had to fix here is that activate wasn't being built
|
||
statically. Have to add -Xlinker -static to CFLAGS - I don't know if
|
||
this is a no-op on MIPS
|
||
|
||
Mon Oct 16 20:51:08 BST 2023
|
||
|
||
Here's a thing: the u-boot installed by openwrt on this device has a
|
||
ubifsload command, and it has a writable ubootenv. So instead of
|
||
having a separate partition for the kernel we could put the kernel in
|
||
the actual filesystem
|
||
|
||
I think we should do this by excluding flashimage and including some
|
||
other module (to be written) instead. ubimage or somesuch, perhaps.
|
||
|
||
So the image we wish to create is a ubifs with a kernel inside it in
|
||
/boot and we also need to change the u-boot env value of
|
||
|
||
boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
|
||
|
||
so that it mounts the rootfs and finds /boot/uimage inside it
|
||
|
||
From uboot this is setenv and saveenv; from a running linux this is fw_setenv
|
||
|
||
Thu Oct 19 09:34:15 BST 2023
|
||
|
||
setenv bootargs 'liminix console=ttyS0,115200 panic=10 oops=panic init=/bin/init loglevel=8 root=ubi0:liminix rootfstype=ubifs fw_devlink=off'
|
||
|
||
|
||
ubifsmount ubi0:liminix
|
||
ubifsload 4007ff28 boot/uimage
|
||
bootm 0x4007ff28
|
||
|
||
|
||
Thu Oct 19 23:11:17 BST 2023
|
||
|
||
Assuming you've done the openwrt installer to repartion the device,
|
||
what are the steps to install Liminix?
|
||
|
||
1) build rootfs, which incorporates kernel
|
||
|
||
2) from u-boot:
|
||
|
||
uboot> ubimkvol /dev/ubi0 -N liminix -S 825
|
||
uboot> tftpboot 0x40400000 result/rootfs
|
||
uboot> ubi write 40400000 liminix $filesize
|
||
uboot> setenv boot_production 'led $bootled_pwr on ; ubifsmount ubi0:liminix; ubifsload 4007ff28 boot/uimage; bootm 4007ff28'
|
||
|
||
What if we don't have a serial console? can we do all this from openwrt?
|
||
|
||
Fri Oct 27 23:21:08 BST 2023
|
||
|
||
setenv serverip 10.0.0.1
|
||
setenv ipaddr 10.0.0.8
|
||
setenv bootargs 'liminix earlyprintk earlycon=uart8250,mmio32,0xf1012000 ramoops.mem_address=0x8000000 ramoops.mem_size=0x40000 ramoops=max_reason=2 mem=128M earlycon=ttyS0 console=ttyS0,115200 panic=10 oops=panic init=/bin/init loglevel=8 root=ubi0:liminix rootfstype=ubifs fw_devlink=off'
|
||
setenv bootargs 'liminix ramoops.mem_address=0x8000000 ramoops.mem_size=0x40000 ramoops=max_reason=2 mem=128M console=ttyS0,115200 panic=10 oops=panic init=/bin/init loglevel=8 root=ubi0:liminix rootfstype=ubifs fw_devlink=off'
|
||
tftpboot ${kernel_addr_r} result
|
||
bootm ${kernel_addr_r}
|
||
|
||
|
||
---
|
||
this is potentially worth checkng out because we do have very slow
|
||
decompress speed
|
||
|
||
https://scm.linefinity.com/common/u-boot/commit/5818198e6a184963c6afc82178b23a64435ace6a
|
||
|
||
Commit 5bb2c550b1 ("arm: mvebu: Move internal registers in
|
||
arch_very_early_init() function") implemented code movement according to
|
||
(now incomplete) comments which resulted in semi-broken code.
|
||
|
||
The result is that I-cache is currently disabled for all Armada 38x boards
|
||
and maybe there are some other (unreported / undetected) issues.
|
||
|
||
[...] After this change lzmadec command with lzma image of 0x7000000 bytes is
|
||
doing decompression just 5 seconds. Before this change it was 30 seconds.
|
||
|
||
|
||
Mon Oct 30 21:03:55 GMT 2023
|
||
|
||
We have a kernel that boots on the Omnia, now we need to build a
|
||
rootfs. Given this device uses mmc for its primary storage, we should
|
||
use a block filesystem not a flash filesystem.
|
||
|
||
|
||
setenv serverip 10.0.0.1
|
||
setenv ipaddr 10.0.0.8
|
||
setenv bootargs 'liminix console=ttyS0,115200 panic=10 oops=panic init=/bin/init loglevel=8 root=/dev/mtdblock0 rootfstype=ext4fs fw_devlink=off mtdparts=phram0:22M(rootfs) phram.phram=phram0,0x1300000,23068672,65536 root=/dev/mtdblock0'
|
||
tftpboot 0x1000000 tftpboot/uimage ; tftpboot 0x1300000 tftpboot/dtb ; tftpboot 0x29b0000 tftpboot/dtb; tftpboot 0x29c0000 initrd.img
|
||
|
||
|
||
Sat Nov 4 12:22:37 GMT 2023
|
||
|
||
setenv serverip 10.0.0.1
|
||
setenv ipaddr 10.0.0.8
|
||
setenv bootargs 'liminix console=ttyS0,115200 panic=10 oops=panic init=/bin/init loglevel=8 root=/dev/mtdblock0 rootfstype=ext4 fw_devlink=off mtdparts=phram0:22M(rootfs) phram.phram=phram0,0x40300000,23068672,65536 root=/dev/mtdblock0'
|
||
tftpboot 0x40000800 tftpboot/uimage ; tftpboot 0x419b0800 tftpboot/dtb ; tftpboot 0x41a00000 initrd.img ; tftpboot 0x40300000 tftpboot/rootfs
|
||
bootm 0x40000800 0x41a00000 0x419b0800
|
||
|
||
kernel 0x40000800 + 2af400 = "402afc00"
|
||
rootfs 0x40300000 + 15f9400 = "418f9400"
|
||
dtb 0x419b0800 + 4e00 = "419b5600"
|
||
|
||
Sun Nov 5 00:01:56 GMT 2023
|
||
|
||
Open questions
|
||
|
||
1) using -device loader for qemu phram, how do we choose appropriate
|
||
start address for all architectures? we could try to unify this
|
||
with the tftpboot approach, but that would mean providing the dtb
|
||
ourselves somehow which seems silly when qemu already does it
|
||
|
||
2) flash erase block size for tftpboot phram, it need to match the hardware
|
||
- we don't use it at all for squashfs
|
||
- for jffs2 it needs to match if tftpboot is to use same rootfs image
|
||
as flash
|
||
- we don't have any way to do a tftpboot ubifs
|
||
- ext4 doesn't care
|
||
|
||
3) the rootfstype needs thought.
|
||
|
||
- for all but squashfs it implies an initramfs
|
||
- jffs2 can be flashed naively
|
||
- ubifs needs an installer to not clobber erase counts
|
||
- ext4 (for omnia) needs a block device and can't be flashed along
|
||
with the kernel/initramfs because it's a separate disk. or maybe
|
||
the omnia can load kernel from mmc?
|
||
|
||
phram plus mtd_block is ok for ext4 for qemu, so that's one thing
|
||
fewer to deal with
|
||
|
||
4) for tftpboot with a separate initramfs, is there any way to
|
||
make address selection easier?
|
||
|
||
5) ubifs needs a different set of flash parameters (PEB, LEB etc)
|
||
|
||
Tue Nov 7 23:19:10 GMT 2023
|
||
|
||
We can flash the turris omnia from a USB stick
|
||
https://docs.turris.cz/hw/omnia/rescue-modes/
|
||
|
||
it looks for omnia-medkit-latest.tar.gz and (I'm guessing) just
|
||
unpacks it onto the emmc.
|
||
|
||
Perhaps we need per-device installation instructions in the docs.
|
||
|
||
* rename defaultOutput to installerOutput
|
||
* attach some docs to the various options for installerOutput
|
||
* add a link from the device's rendered manual section to the
|
||
relevant installer output doc
|
||
|
||
do we expect that outputs will build on each other? e.g.
|
||
turris omnia output is basically a tarball (other devices
|
||
might want this too) but with docs describing how to reset the
|
||
device and hold the button down until the led flashes four times
|
||
(other devices probably won't want this). maybe the model here
|
||
is that the turris output is a directory with a symlink to the
|
||
tarball and an informative README containing the instructions.
|
||
Although we also want the instructions in the manual where people
|
||
can read them before building anything.
|
||
|
||
Fri Nov 10 21:27:50 GMT 2023
|
||
|
||
Realising now that outputs and installers aren't the same thing.
|
||
|
||
e.g. flashimage can be installed from u-boot or from kexecboot
|
||
|
||
perhaps we distinguish between the
|
||
|
||
"installation image":
|
||
- firmware.bin
|
||
- tarball
|
||
- ubifs image
|
||
- kernel + rootfs
|
||
|
||
and "installer"
|
||
- kexecboot script
|
||
- u-boot script to flash squashfs image
|
||
|
||
Sun Nov 12 17:17:30 GMT 2023
|
||
|
||
What TODO?
|
||
|
||
- "does the kernel live on the filesystem" depends on the bootloader
|
||
not the filesystem
|
||
- could we implement this with a module that adds to config.filesystem ?
|
||
it would depend on whether the bootloader can follow symlinks to
|
||
files not in /boot (probably fine unless crossing filesystems)
|
||
- the other question is how much futzing around in u-boot can/do we do
|
||
to tell u-boot how to boot? for grown-up u-boot it's not a
|
||
problem as we can saveenv but are there broken u-boots that would
|
||
prevent this?
|
||
|
||
- kexecboot is unloved and documented in the wrong place. do we have a
|
||
test for it even?
|
||
- it won't work on aarch64 because it needs memmap=
|
||
- hardcodes memory size, which we should probably work out dynamically
|
||
|
||
- how to put device name into the device docs
|
||
maybe devices
|
||
|
||
- make config.boot.commandLine a single string
|
||
- finish omnia
|
||
- for installation on turris omnia we need tarball not ext4 image
|
||
(but keep the ext4 image anyway for tftpboot and possibly kexecboot)
|
||
[done] - now we have lim.parseInt should we use it consistently?
|
||
- usefulness tiers for devices ("stable", "experimental", "wip")
|
||
- params for ubi(fs) are a mess
|
||
- create an l2tp configuration
|
||
- iperf and tuning
|
||
- wlan country code
|
||
|
||
|
||
Fri Nov 17 17:30:39 GMT 2023
|
||
|
||
kexec is fraught. I spent some time trying (unsuccesfully) to get a
|
||
kexecboot test running, but it doesn't work in qemu for the reason
|
||
that the kernel I built for qemu has SMP support but does not have
|
||
kexec_nonboot_cpu_func() - which is the needed function to stop
|
||
non-boot CPUs before jumping into the new kernel. That this code is
|
||
all MIPS-specific (I have to assume that other architectures have
|
||
entirely different ways to stop non-boot CPUs?) is a bit worrisome: how
|
||
many other ways is kexec hardware-dependent?
|
||
|
||
We have two scenarios where we may want to use it:
|
||
|
||
1) the "installer": e.g. for UBI platforms, we want to plonk
|
||
a new ubifs on the device without clobbering the erase counters, which
|
||
means either doing it from U-Boot - needs serial connection -
|
||
or doing it from a Linux of some kind that is not running on the
|
||
filesystem we're toasting.
|
||
|
||
2) reinstalling after the initial install - this is a big deal for
|
||
squashfs where there is no other way to change data, and an only slightly
|
||
smaller deal for jffs2, where there isn't much room to change much
|
||
data.
|
||
|
||
Maybe instead of kexec we could do this by stopping services and then
|
||
pivot_root into a ramfs. We would, I assume, need to stop any processes
|
||
that have open files on the root fs, but we would need to have network
|
||
interfaces running. So we need a subset of services that run in recovery:
|
||
can make this a bundle
|
||
|
||
* mount a ramfs
|
||
* copy the closure of the bundle into the ramfs
|
||
* stop all processes (including init?)
|
||
|
||
sending pid 1 a signal FOO will cause it to run .s6-svscan/SIGFOO
|
||
|
||
Fri Nov 17 23:53:43 GMT 2023
|
||
|
||
So we need to extend .s6-svscan/finish to
|
||
|
||
if test -e /maintenance/bin/init
|
||
cd /maintenance
|
||
mount --bind /maintenance/ /
|
||
chroot .
|
||
exec /bin/init -D maintenance
|
||
fi
|
||
|
||
|
||
foreground {
|
||
if { test -e /maintenance/bin/init }
|
||
cd /maintenance
|
||
foreground { mount --move /maintenance/ / }
|
||
foreground { chroot . }
|
||
redirfd -r 0 /dev/console
|
||
redirfd -w 1 /dev/console
|
||
fdmove -c 2 1
|
||
emptyenv /bin/init -D maintenance
|
||
}
|
||
${s6-linux-init}/bin/s6-linux-init-hpr -fr
|
||
|
||
|
||
https://openwrt.org/docs/techref/sysupgrade
|
||
|
||
s6-svscanctl -t /run/service
|
||
|
||
Sun Nov 19 10:23:17 GMT 2023
|
||
|
||
# cat `type -p reboot`
|
||
#!/nix/store/0v3q2lnh7bwg0ldk24lzmsdnmidmdvm6-execline-mips-unknown-linux-musl-2.9.3.0-bin/bin/execlineb -S0
|
||
/nix/store/j41b85ccx0rmf7lm5g13zqb7fs68l8y2-s6-linux-init-mips-unknown-linux-musl-1.1.1.0-bin/bin/s6-linux-init-hpr -r \$@
|
||
|
||
|
||
s6-linux-init-hpr calls hpr_send("", 0)
|
||
then
|
||
hpr_shutdown(what, &tain_zero, 0))
|
||
which sends "Shpr"[what] to SCANDIRFULL "/" SHUTDOWND_SERVICEDIR "/" SHUTDOWND_FIFO
|
||
|
||
which I assume is s6-linux-init-shutdownd.c
|
||
|
||
it calls prepare_shutdown on socket read, which sets deadline, grace_time.
|
||
later (when?) it calls
|
||
|
||
run_stage3(basedir) ; # we can see this by adding a message to rc.shutdown
|
||
# this causes s6-rc services to be downed gently
|
||
s6-rc -v2 -bDa change
|
||
|
||
prepare_stage4(basedir, what)
|
||
|
||
creates a file STAGE4_FILE with the contents:
|
||
s6-linux-init-umountall
|
||
scripts/rc.shutdown.final
|
||
s6-linux-init-hpr -f -r
|
||
|
||
unsupervise_tree() ;
|
||
|
||
goes through /run/service/*/supervise/control fifos
|
||
except shutdownd and logger, sending
|
||
"d" to each
|
||
|
||
then does
|
||
s6_svc_write(SCANDIRFULL "/" S6_SVSCAN_CTLDIR "/control", "an", 2)
|
||
(this is a rescan not a terminate)
|
||
|
||
#define SCANDIRFULL S6_LINUX_INIT_TMPFS "/" S6_LINUX_INIT_SCANDIR
|
||
(works out to be /run/service "/" ".s6-svscan")
|
||
|
||
ls
|
||
kill(-1, SIGTERM) ;
|
||
|
||
s6-rc -v2 -bDa change
|
||
cd /run/service
|
||
for i in s6-linux-init-runleveld s6rc-oneshot-runner s6rc-fdholder eth* getty ; do s6-svc -d /run/service/$i; done
|
||
|
||
|
||
s6-rc -v2 -bDa change
|
||
cd /run/service
|
||
for i in s6-linux-init-runleveld s6rc-oneshot-runner s6rc-fdholder eth* ; do s6-svc -d /run/service/$i; done
|
||
s6-svscanctl -an /run/service
|
||
|
||
Wed Nov 22 22:01:02 GMT 2023
|
||
|
||
- define a subset of services that run in maintenance mode.
|
||
- write a command that copies the closure of this bundle into
|
||
/run/maintenance
|
||
- create enough non-store filesystem (proc dev etc) to make it run
|
||
|
||
Thu Nov 23 00:09:44 GMT 2023
|
||
|
||
I was as surprised as anybody that this seems to work, at least
|
||
insofar as it has started a busybox sh process. there is a serious
|
||
deficit of symlinks to busybox, so almost no shell scripts work. and I
|
||
think we need an rc.init
|
||
|
||
It would be worth tidying up the main s6 run-image quite a lot before
|
||
we go further with this
|
||
|
||
We'd like to be able to reuse the s6 pseudofile structure (/etc/s6-rc
|
||
and /etc/s6-linux-init) but we can't make it a derivation because it's
|
||
pseudofiles (with funny permissions) not real files. Maybe we can
|
||
invoke the module as a function?
|
||
|
||
Fri Nov 24 23:29:48 GMT 2023
|
||
|
||
Turris TODO
|
||
|
||
- see if network works (eth[012], which is which?)
|
||
- wireless drivers
|
||
[DONE] ath9k and ath10k, it's like old times
|
||
https://docs.turris.cz/hw/omnia/omnia/#turris-omnia-wi-fi-6
|
||
(note: other variant of the device has a MT7915AN, should we add
|
||
support for that as well?)
|
||
|
||
- [DONE] feed the watchdog
|
||
it looks like compiling watchdog support is sufficient to stop the
|
||
thing from rebooting after three minutes, there is no need to actually
|
||
feed it from userspace.
|
||
|
||
- "does the kernel live on the filesystem" depends on the bootloader
|
||
not the filesystem
|
||
- could we implement this with a module that adds to config.filesystem ?
|
||
it would depend on whether the bootloader can follow symlinks to
|
||
files not in /boot (probably fine unless crossing filesystems)
|
||
- the other question is how much futzing around in u-boot can/do we do
|
||
to tell u-boot how to boot? for grown-up u-boot it's not a
|
||
problem as we can saveenv but are there broken u-boots that would
|
||
prevent this?
|
||
- perhaps we need different boot "recipes" - e.g. some device
|
||
might want boot.scr and another something different
|
||
|
||
|
||
|
||
|
||
- create installable tarball and test
|
||
- gpio thingy for SFP switching
|
||
- iperf
|
||
|
||
- document the watchdog
|
||
- remove kexecboot? it's unloved and documented in the wrong place. do we have a
|
||
test for it even?
|
||
- it won't work on aarch64 because it needs memmap=
|
||
- hardcodes memory size, which we should probably work out dynamically
|
||
|
||
- how to put device name into the device docs
|
||
|
||
- [WONT] make config.boot.commandLine a single string
|
||
this sounds sensible but it just makes it harder to put useful comments
|
||
against command line fragments so that we know why they're there
|
||
|
||
- usefulness tiers for devices ("stable", "experimental", "wip")
|
||
- params for ubi(fs) are a mess
|
||
- iperf and tuning
|
||
- wlan country code
|
||
- create an l2tp configuration
|
||
|
||
Sun Nov 26 15:37:07 GMT 2023
|
||
|
||
hatching a plan ... we could do "predictable" network interfaces like this:
|
||
|
||
. add a devpath attr to network/link.nix
|
||
. get the kernel-issued name from "/sys${devpath}/net"
|
||
. use ip link set ${oldname} name ${newname}
|
||
|
||
if we had the full iproute2 thng we could keep the old name as well:
|
||
# ip link property add dev wan altname eth1
|
||
|
||
maybe we could do this with lua/netlink? no support in there currently
|
||
for RTM_NEWLINKPROP though
|
||
|
||
Maybe we'll skip doing the altname. The attraction of it is that it
|
||
means the existing name isn't removed, so there's no possibility of a
|
||
race.
|
||
|
||
The kernel will allocate eth0 when asked for eth%d and there is no
|
||
eth0. This might be the case where eth0 previously existed but it
|
||
just got renamed to lan
|
||
|
||
Sun Nov 26 21:20:23 GMT 2023
|
||
|
||
The wrinkle here is ifwait: using netlink we can't wait for an
|
||
interface by devpath but have to do it by name - which is a problem if
|
||
the interface is not yet present, because there won't be a devpath
|
||
in which to look up the name until it is.
|
||
|
||
So we need a new flow
|
||
|
||
- wait for devpath to exist
|
||
- get the ifindex (which shouldn't change, even if the name does)
|
||
- churn rtnetlink messages for that index
|
||
|
||
We don't want to poll the sysfs file, but we can check it whenever
|
||
we get a netlink message
|
||
|
||
Sun Nov 26 22:33:16 GMT 2023
|
||
|
||
There is no way to refer to the hardware device for a bridge interface
|
||
by sysfs path because it has none. This is probably true of other
|
||
virtual devices as well.
|
||
|
||
ls: cannot access '/sys/class/net/vbridge0/device': No such file or directory
|
||
|
||
Also, there is no way to refer to the _netdevice_ of a hardware
|
||
interface without also knowing its default name, which doesn't help us
|
||
if enumeration changes
|
||
|
||
ls /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/net/
|
||
enp1s0
|
||
|
||
So we should only be specifying devices by devpath if they're
|
||
hardware devices discovered by the kernel, not synthetic devices (that
|
||
we pick the name of anyway).
|
||
|
||
So maybe we don't need to rewrite ifwait, we just do it after renaming
|
||
the device
|
||
|
||
Wed Nov 29 21:28:37 GMT 2023
|
||
|
||
How do we name outputs?
|
||
|
||
fileystem image
|
||
with-boot filesystem image (e.g. ubifs for belkin)
|
||
tarball
|
||
with-boot tarball (e.g. omnia)
|
||
flashable combined image of kernel + filesystem (e.g. gl-mt*)
|
||
kernel + filesystem image + dtb + tftpboot glue
|
||
kernel + filesystem image + qemu script
|
||
|
||
we could add initramfs as a separate thing for tftpboot and qemu
|
||
(and FIT images) but it would mean not sharing a kernel with
|
||
the outputs that require embedded initramfs
|
||
|
||
we can enable with-boot variants of outputs by adding a
|
||
boot.loader config option. if we go that route, can we
|
||
use config options to drive the whole output thingy?
|
||
We could have a config option that just changes "defaultOutput"
|
||
but is that useful?
|
||
|
||
Maybe the question is: we can choose a different output at build time
|
||
rather than editing configuration - how often is this useful? I think
|
||
tftpboot vs installable is about the only case.
|
||
|
||
adding a /boot to a filesystem differs from making a combined
|
||
flashable image because it is a config change and not a composition
|
||
of two other already-built outputs.
|
||
|
||
we could have done tftpboot that way as well, but we chose to unpack
|
||
and repack the fdt so we don't have to build two kernels - and also so
|
||
that we can have both outputs from the same configuration without
|
||
editing any files.
|
||
|
||
for tftpboot we don't want to make the filesystem embed the kernel
|
||
if we need a separate kernel for booting (guessing we can't usually make
|
||
u-boot loopback mount a downloaded filesystem image). so that points to
|
||
not making it a config option, _or_ to making the inclusion logic
|
||
(hardware wants a kernel in filesystem) && !(output == tftpboot)
|
||
which itself means the output somehow needs to be injected into the
|
||
config
|
||
|
||
nix-build -I liminix-config=./examples/hello-from-mt300.nix --arg device "import ./devices/my-device" --arg output=tftpboot
|
||
|
||
let's see if we can not do that?
|
||
|
||
repacking a ubifs to add /boot is awkward and unpleasant
|
||
|
||
Thu Nov 30 14:33:08 GMT 2023
|
||
|
||
~~We need a new boot-in-rootfs output which calls rootfs with
|
||
(config.filesystem // { /boot ... }) when the device
|
||
boot type is extlinux~~
|
||
|
||
~~Do we need to put it in systemConfiguration as well? Yes,
|
||
otherwise liminix-rebuild won't install it~~
|
||
|
||
We may have a problem here actually: if /boot is only set up after
|
||
reboot, by adding a link while running the initramfs, how did the
|
||
bootloader find the kernel to boot in the first place? So
|
||
we need /boot to exist and to point to the new kernel before rebooting
|
||
into it, so we need to create it as a real directory along with /nix/store
|
||
when making the filesystem,
|
||
instead of relying on activate which will be too late.
|
||
|
||
maybe we could extract the root directory structure creation
|
||
as a separate output from rootfs, then there is a single place
|
||
to put "and also add /boot"
|
||
|
||
we will need to update pkgs/min-copy-closure/liminix-rebuild.sh
|
||
to add /boot
|
||
|
||
we could make the contents of /boot a derivation and then
|
||
/boot itself is just a symlink to it. we would need to ensure that
|
||
the derivation is part of the system closure, though
|
||
|
||
Sat Dec 2 15:33:07 GMT 2023
|
||
|
||
- make rootfs the directory structure
|
||
|
||
Sun Dec 3 23:31:35 GMT 2023
|
||
|
||
Spent too much of the weekend first fighting run-liminix-vm.sh and
|
||
then rewriting it in Fennel, but we are now at the point that we can
|
||
boot u-boot in qemu. However, it maps the rootfs into high memory
|
||
where phram can find it, instead of putting it into a flash that
|
||
_qemu_ can see as flash, so u-boot is not able to boot the kernel or
|
||
at least not in a similar-to-hardware fashion. Once we've added that,
|
||
we need to write a test for boots-a-kernel-in-the-filesystem
|
||
|
||
Mon Dec 4 19:46:58 GMT 2023
|
||
|
||
We wanted a test that we are creating an image that u-boot can boot
|
||
using extlinux. Turns out that u-boot only has scripts to do this in
|
||
the case that the storage device has a partition table. Which is
|
||
representative of the Omnia mmc, but maybe not going to work for
|
||
jffs2/ubifs
|
||
|
||
(For ubifs it might be OK, there's some concept of partitions
|
||
|
||
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
|
||
|
||
)
|
||
|
||
So what do we need? a disk image with a partition table and an ext4fs
|
||
image in the only partition, and that partition to be bootable. Then
|
||
run-liminix-vm gets a --disk-image option which causes it to use
|
||
U-Boot instead of direct load (can we wrap it with something that sets
|
||
up the paths so it can find u-boot and qemu?)
|
||
|
||
ok, we're going to define outputs.diskimage which is like
|
||
outputs.flashimage but it has a partition table. Then we can make a
|
||
qemu configuration with an ext4 filesystem and defaultOutput="diskimage"
|
||
and config.boot.loader.extlinux.enable = true
|
||
|
||
sfdisk default behaviour for GPT partitioned disk is to start at sector 2048
|
||
(sectors are 512 bytes)
|
||
|
||
Device Start End Sectors Size Type
|
||
disk.bin1 2048 14335 12288 6M Linux filesystem
|
||
|
||
Tue Dec 5 23:54:22 GMT 2023
|
||
|
||
Need mbr not gpt. At least, it takes up less space and it doesn't
|
||
inveigle us into EFI boot.
|
||
|
||
This is close to working except that it doesn't want to boot a uimage
|
||
|
||
Enter choice: 1
|
||
1: Liminix
|
||
Retrieving file: /boot/initramfs
|
||
Retrieving file: /boot/kernel.gz
|
||
append: console=ttyAMA0 panic=10 oops=panic init=/bin/init loglevel=8 root=/dev/mtdblock0 rootfstype=ext4 fw_devlink=off
|
||
zimage: Bad magic!
|
||
|
||
Thu Dec 7 19:33:02 GMT 2023
|
||
|
||
virtio devices don't have standard major/minor so we can't create
|
||
device nodes for them at build time. Either we mount devtmpfs in the
|
||
initramfs (do we then have to move it to /target?) or we parse the
|
||
/sys/block/vda/vda1/dev node to get 253:1 or whatever
|
||
|
||
Fri Dec 8 16:36:07 GMT 2023
|
||
|
||
We'd like to remove the ugly special handling of qemu dtb. Here are
|
||
some thoughts
|
||
|
||
1) qemu provides its guest the correct DTB for the configured hardware.
|
||
This is a desirable thing and we wish more platforms did it, so would
|
||
like not to replace it with a static dtb if we can avoid that
|
||
|
||
2) so we need some kind of config option that says "platform provides the
|
||
device tree" (or alternatively, "we need a static dtb, platform doesn't
|
||
provide it").
|
||
|
||
config.boot.platformProvidesDeviceTree
|
||
|
||
|
||
|
||
Monday
|
||
|
||
so where are we? we've removed the need for every hardware device to
|
||
be able to build flashimage, because not every hw device (looking at you,
|
||
bellkin/turris) works like that.
|
||
|
||
for the belkin we can have imports = [ modules/outputs/ubimage ]
|
||
and extlinux enabled
|
||
|
||
for the nwa from Raito we'd like to have imports = [ modules/outputs/ubimage ]
|
||
but the bootloader is mtd partition-based (or ubi volume? check?) -
|
||
so ubimage needs to know how to do that
|
||
|
||
perhaps we need an output for "smash together a kernel and a
|
||
filesystem image that does not also contain a kernel, and don't
|
||
put a partition table on the front"
|
||
|
||
diskimage {
|
||
partitionType = "mtd" ; # or "mbr" or maybe "gpt"
|
||
partitions = [ o.uimage o.rootfs ];
|
||
}
|
||
|
||
|
||
|
||
|
||
for the turris we need to check but proceeding on the assumption
|
||
it wants a tarball with extlinux enabled
|
||
|
||
https://docs.turris.cz/geek/schnapps/schnapps/#export-and-import
|
||
https://wiki.turris.cz/en/howto/omnia_booting_from_external_storage
|
||
|
||
if we adopt this as our installation format then we are not
|
||
reformatting the flash and will keep the btrfs that the device
|
||
was shipped with.
|
||
|
||
https://forum.turris.cz/t/update-to-5-1-x-by-medkit/13986/12
|
||
suggests that we could install a custom medkit from the
|
||
vendor OS
|
||
|
||
=> btrsubvol mmc 0:1
|
||
ID 257 parent 5 name /@
|
||
ID 259 parent 5 name /@factory
|
||
|
||
there don't seem to be any other btr commands in u-boot
|
||
|
||
Tue Dec 12 14:38:53 GMT 2023
|
||
|
||
from the source code, to get to the various omnia revovery modes
|
||
|
||
uboot> setenv omnia_reset 3 # or 1..n
|
||
uboot> setenv boot_targets rescue
|
||
uboot> boot
|
||
|
||
// reset boot_targets to default value.
|
||
|
||
Tue Dec 12 22:44:34 GMT 2023
|
||
|
||
The hold-down-reset-until-n-leds-flash support depends quite heavily
|
||
on the post-boot Linux environment, in that it appears to be passing
|
||
omniarescue=3 rescue_mode=3 to the kernel command line -> pid 1
|
||
cmdline
|
||
|
||
On the other hand, it is described as being able to boot from usb
|
||
stick if there's a boot.scr on the usb stick, so maybe we just do
|
||
that. The installation process could then be "boot usb, dd the
|
||
disk image to mmc, reboot, remove usb, realise we got the wrong root=".
|
||
Hmm.
|
||
|
||
* Could we edit extlinux.conf for first boot? But bear in mind it's a
|
||
link to a store file.
|
||
|
||
* Could we have extlinux.conf point at mmc0 and somehow override it for the
|
||
usb stick boot?
|
||
|
||
* Could preinit try multiple root mounts until it gets one that works?
|
||
|
||
* maybe we could detect omniarescue on kernel command line and switch to
|
||
usb root?
|
||
|
||
* maybe outputs.usbstick could generate a customised rootfs image?
|
||
it might be unworkable to
|
||
|
||
(narrator: it boots from mmc0 first and usb stick second, so that's not
|
||
particularly useful)
|
||
|
||
|
||
|
||
|
||
Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
|
||
Type: Removable Hard Disk
|
||
Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
|
||
... is now current device
|
||
Scanning usb 0:1...
|
||
No EFI system partition
|
||
fdt_find_or_add_subnode: chosen: FDT_ERR_BADSTRUCTURE
|
||
ERROR: /chosen node create failed
|
||
- must RESET the board to recover.
|
||
|
||
Thu Dec 14 15:32:39 GMT 2023
|
||
|
||
from the omnia rescue image, we have
|
||
|
||
## Loading kernel from FIT Image at 01700000 ...
|
||
|
||
Load Address: 0x00800000
|
||
Entry Point: 0x00800000
|
||
|
||
|
||
int lzmaBuffToBuffDecompress(unsigned char *outStream, SizeT *uncompressedSize,
|
||
const unsigned char *inStream, SizeT length)
|
||
|
||
err = image_decomp(os.comp, load, os.image_start, os.type,
|
||
load_buf, image_buf, image_len,
|
||
CONFIG_SYS_BOOTM_LEN, &load_end);
|
||
|
||
configs/mvebu_db_armada8k_defconfig:CONFIG_SYS_BOOTM_LEN=0x800000
|
||
default 0x4000000 if PPC || ARM64
|
||
default 0x1000000 if X86 || ARCH_MX6 || ARCH_MX7
|
||
default 0x800000
|
||
|
||
Fri Dec 15 19:21:53 GMT 2023
|
||
|
||
Let's put some English words on the page to explain the above
|
||
gibberish. Since I upgraded the U-Boot on my Turris Omnia, it has
|
||
stopped being able to tftpboot.
|
||
|
||
Uncompressing Kernel Image
|
||
lzma compressed: uncompress error 7
|
||
Must RESET board to recover
|
||
|
||
"uncompress error 7" means there is not enough space in the output
|
||
buffer, and the output buffer is set by CONFIG_SYS_BOOTM_LEN which is
|
||
8192k, smaller than the uncompressed 12104200 of our kernel.
|
||
|
||
So how can we fix?
|
||
|
||
* one possibility is to do what the turris rescue mode does: build an
|
||
uncompressed uimage and then lzma the result. u-boot can uncompress
|
||
the received file using lzmadec command. we'd want to do this without
|
||
breaking tftpboot on every other device that might not have an lzmadec
|
||
command
|
||
|
||
* is there bloat in the kernel we could trim? probably not 4MB of it
|
||
|
||
* we could build a custom u-boot with a bigger buffer. this _might_
|
||
not be a completely stupid idea as it's only the people prepared to
|
||
open the box that would be doing tftp workflows anyway, so provided
|
||
it's possible to replace u-boot without bricking it
|
||
|
||
* we could try building zimage instead of uimage and use bootz to
|
||
start it
|
||
|
||
Sat Dec 16 11:15:56 GMT 2023
|
||
|
||
there is another use case for weird tftpboot derivation, which is the
|
||
device Raito has ported to where you need to wave a magic chicken at
|
||
u-boot on each command line
|
||
|
||
Sat Dec 16 23:32:11 GMT 2023
|
||
|
||
Turns out that even when using an uncompressed uimage, u-boot runs the
|
||
code to check the decompressed size, so that doesn't help at all. But
|
||
booting a zImage works fine. I am committing a first pass of
|
||
modules/outputs/tftpbootlz.nix which does this using a lot of
|
||
copy-paste and (ironically) no lzma stuff at all.
|
||
|
||
Sun Dec 17 16:25:30 GMT 2023
|
||
|
||
it's started failing to mount root on arm32 because it's not recognising
|
||
the reserved-memory and something is trashing the phram filesystem
|
||
|
||
reserved-memory {
|
||
|
||
phram-rootfs {
|
||
reg = <0x1400000 0x1900000>;
|
||
compatible = "phram";
|
||
};
|
||
};
|
||
|
||
Sun Dec 17 17:13:54 GMT 2023
|
||
|
||
* We need to write the fdt phram differently on 64 bit vs 32 bit
|
||
(address-cells and size-cells should be 2 or 1)
|
||
|
||
* this might be why it wasn't working on mips (can we test this
|
||
somehow in qemu or do we need to plug a device in?)
|
||
|
||
qemu user-mode networking has a builtin tftp server.
|
||
|
||
so we need a test that builds the tftpboot target for each qemu arch,
|
||
and then does run-liminix-vm with the --lan and --u-boot options, then
|
||
drives it with expect
|
||
|
||
|
||
* maybe tftpboot[lz] could be reintegrated with the regular one somehow
|
||
|
||
Fri Dec 22 15:11:35 GMT 2023
|
||
|
||
We have a working test for tftpboot, on all platforms, which took a
|
||
while.
|
||
|
||
* tftpbootlz needs to be updated with what we learned, or merged
|
||
back into it
|
||
|
||
* omnia install
|
||
|
||
- build a stripped-down installer image which can be put on a
|
||
usb stick
|
||
- from openwrt on the device, use fw_setenv to set boot order
|
||
- boot into the installer image
|
||
- reformat the emmc as per requirements
|
||
- ???
|
||
- profit
|
||
|
||
the missing step might be to do a cpio from installer onto
|
||
the emmc
|
||
|
||
or something with chroot
|
||
|
||
is levitate useful here?
|