Daniel Barlow
efa1919e04
move squashfs kernel options into module
2023-08-30 22:59:28 +01:00
Daniel Barlow
de77635490
move bridge-related kernel config to the module
2023-08-30 17:29:42 +01:00
Daniel Barlow
2e50368bd2
rename config.outputs to config.system.outputs
...
New rules: everything under "config" that isn't actually configuration
(e.g. build products) will in future live in config.system. This is
the first step.
2023-07-13 19:24:59 +01:00
Daniel Barlow
4cfaed7303
specify root device as /dev/mtdblockn
...
the (openwrt?) magic that autodetects it based on mtd labels
won't work with a two-stage boot
2023-04-26 22:16:15 +01:00
Daniel Barlow
2f3b108ef1
tftpboot: set phram erase block size to match hardware
...
this is needed for tftp boot with a jffs2 filesystem
2023-04-23 21:24:37 +01:00
Daniel Barlow
633a4f8003
move BLK_DEV_INITRD to base.nix
2023-04-10 22:57:50 +01:00
Daniel Barlow
4ea60a6082
watchdog support for mt300n-v2
2023-03-24 17:11:36 +00:00
Daniel Barlow
efd878dc5e
extract common code for patching kernel source fdorm openwrt
2023-03-18 19:17:58 +00:00
Daniel Barlow
ce05f4e44c
extract phram.mtd ramdisk support from tftpboot module
...
also rename tftproot output to tftpboot for consistency
2023-03-18 14:30:10 +00:00
Daniel Barlow
ad3f241af9
support mt300n-v2 flash
2023-03-10 23:24:05 +00:00
Daniel Barlow
2594239bbc
can't use builtins.fetchurl on hydra?
2023-03-10 18:51:07 +00:00
Daniel Barlow
be06363e4f
new example for rsync/usb backup server
2023-03-10 18:42:32 +00:00
Daniel Barlow
d83bcc643e
add wifi firmware, move things around in ram
...
* at the base address we were using, the filesystem was getting
corrupted presumably because the kernel unpacked into it
* leave a little more space between compressed kernel and
squashfs. this is probably ineffective but also harmless
2023-03-10 00:48:47 +00:00
Daniel Barlow
f50b0627a2
gl-mt300n-v2: initialize switch & define networkInterfaces
...
It booted and mounted rootfs the first time I tried, which
was nice. Wireless doesn't work yet, it needs firmware
2023-03-09 19:30:57 +00:00
Daniel Barlow
e0ea576674
rename "device" config tree as "hardware"
...
we are also using "device" for "network device" (as in eth0,
wlan0 etc) so this makes it a bit less confusing perhaps
2023-03-03 22:52:33 +00:00
Daniel Barlow
263882cbe4
move dts config option from boot to device
2023-03-03 22:43:44 +00:00
Daniel Barlow
41ff5a1fe6
move FW_LOADER* config to modules/base
2023-03-01 18:16:01 +00:00
Daniel Barlow
f2e5f65149
add wireless support for hardware devices
...
* gl-ar750 the ath9k works, ath10k is untested
* gl-mt300[an] build but may not boot
2023-02-22 19:17:47 +00:00
Daniel Barlow
a2d8eaf95d
make kernel config visually consistent: symbols are unquoted
2023-02-22 18:28:48 +00:00
Daniel Barlow
4faf529dc3
define kernel MODULE_SIG everywhere
2023-02-22 18:20:56 +00:00
Daniel Barlow
817c3793d4
move dts config from kernel to boot
...
The kernel does not need to know about the DTS. I am prepared
to be very slightly injured on this hill.
2023-02-18 15:13:19 +00:00
Daniel Barlow
5b51aa0826
tftp load address is per-device, IP addresses are local config
2023-02-15 22:06:28 +00:00
Daniel Barlow
dd8c8edd9c
rewrite phram boot to use correct sizes and offsets
2023-02-15 22:06:28 +00:00
Daniel Barlow
1a08aaad01
move outputs into a module
2023-02-10 23:10:44 +00:00
Daniel Barlow
0a06319d0c
make loadAddress and entryPoint device configuration
...
... already having second thoughts about loadAddress
2023-02-10 18:20:01 +00:00
Daniel Barlow
8cead61740
convert devices from overlay to module
...
this makes it possible for devices to stash things in
`config` (e.g. pathname to DTS) that can later be overwritten
(even by the end user)
2023-02-10 17:54:33 +00:00
Daniel Barlow
afd9bbbc80
building but untested kernels for gl-mt300a, gl-mt300n-v2
2023-02-06 23:19:53 +00:00