Fixes a race condition where freeing a buffer and immediately re-allocating and
adding it would fail to pass the file descriptor to udebugd
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Can be used to reserve worst case length using udebug_entry_append,
then setting the final length using udebug_entry_set_length
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The structure passed to `sigaction()` left it's `sa_mask` member uninitialized.
Fixes: beb356b ("uloop: add support for user defined signal handlers")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Reuse and extend the existing signal waker pipe mechanism to add user
defined signal handling functionality to uloop.
This commit introduces two new api functions `uloop_signal_add()` and
`uloop_signal_remove()` along with a new structure type `uloop_signal`
to allow adding and removing arbitrary signal handlers.
Registered signal handlers are maintained in a linked list and matched
by their signo member value which allows registering multiple handlers
for the same signal numbers.
Upon registering a new signal handler, the existing handler is saved
in the `uloop_signal` structure. When removing the user defined signal
handler, the original behavior is restored.
The Lua binding has been updated as well to support the new signal
handler mechanism.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
So far, the only way to implement periodic interval timers was to use
one-shot uloop_timeout timers which are rearmed within their completion
callback immediately on expiration.
While simple, this approach is not very precise and interval lengths will
slowly drift over time, due to callback execution overhead, scheduling
granularity etc.
In order to make uloop provide stable and precise interval timer
capabilities, this commit introduces a new `uloop_interval` structure
along with the new related `uloop_interval_set()`, `uloop_interval_cancel()`
and `uloop_interval_remaining()` api functions.
Periodic timers are implemented using the timerfd facility an Linux and
kqueue EVFILT_TIMER events on macOS/BSD.
The Lua binding has been updated to include support for the new timer type
as well.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- support reading the next timeout in order to determine the poll timeout
- add a callback for fd add/delete/update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Repeatedly calling a run-time function like strlen() on an
invariant value is inefficient, especially if that value can be
computed once (at initialization) or better yet, computed at
compile-time.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
If a JSON file might be read by a human, say for debugging, it
could be useful to pretty-print it. We do this in places by
calling "json_dump -i" but it shouldn't be necessary to know the
arguments to "jshn" (and indeed, that's not portable if we retool
the underlying implementation). Conversely output that's ephemeral
doesn't need to be pretty (say being piped as input to another
command).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
errno needs to be compared against EINTR/EAGAIN instead of the return code,
and only if the return code is < 0.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Using the return value of blobmsg_name as input argument to strcpy can lead
to warnings like these:
error: 'strcpy' offset 6 from the object at 'cur' is out of the bounds of referenced subobject 'name' with type 'uint8_t[]' {aka 'unsigned char[]'} at offset 6 [-Werror=array-bounds]
Fix this by replacing hdr->name with the equivalent hdr + 1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It may not be clear to all users of this API if the provided maxlen argument
refers to the maximum string length or the maximum buffer size.
In order to improve safety and convenience of this API, make it refer to
the maximum string length.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Yet another macro wrapper around the corresponding avl_* macro.
This new macro makes it possible to iterate over vlists in ways which
may have destructive consequences without being punished by segfault.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This uses the same return type as tv_diff so we don't need to check for
integer overflow.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: John Crispin <john@phrozen.org>
The uloop_timeout_remaining function is public and changing its return
type breaks ABI. Change the return type back to int, and return INT_MIN
or INT_MAX if the value returned by tv_diff would overflow integer.
Fixes: be3dc7223a ("uloop: avoid integer overflow in tv_diff")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: John Crispin <john@phrozen.org>
The tv_diff function can potentially overflow as soon as t2->tv_sec is
larger than 2147483. This is very easily hit in ujail, after only
2147484 seconds of uptime, or 24.85 days.
Improve the behaviour by changing the return type to int64_t.
Fixes: FS#3943
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Currently there is no measure in place to prevent the blob buffer
to exceed its maximum allowed length of 16MB. Continuously
calling blob_add() will expand the buffer until it exceeds
BLOB_ATTR_LEN_MASK and after that will return valid blob_attr
pointer without increasing the buflen.
A test program was added in the previous commit, this one fixes
the issue by asserting that the new bufflen after grow does not
exceed BLOB_ATTR_LEN_MASK.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@gmail.com>
The blob buffer has no limitation in place
to prevent buflen to exceed maximum size.
This commit adds a test to demonstrate how
a blob increases past the maximum allowd
size of 16MB. It continuously adds chunks
of 64KB and with the 255th one blob_add()
returns a valid attribute pointer but the
blob's buflen does not increase.
The test is used to demonstrate the
failure, which is fixed with a follow-up
commit.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@gmail.com>
[adjusted test case for cram usage]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Add new utility function mkdir_p(char *path, mode_t mode) to replace
the partially buggy implementations found accross fstools and procd.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
When dealing with 64-bit integers in JSON documents, blobmsg_parse
becomes useless as blobmsg-json only uses BLOBMSG_TYPE_INT64 if the
value exceeds the range of a 32-bit integer, otherwise
BLOBMSG_TYPE_INT32 is used. This is because blobmsg-json parses the
JSON document ad-hoc without knowing the schema in advance and hence
a result of the design of blobmsg-json (and the absence of JSON
schema definitions).
In practise, this made code less readable as instead of using
blobmsg_parse() one had to to deal with *all* attributes manually just
to catch fields which can be both, BLOBMSG_TYPE_INT32 or
BLOBMSG_TYPE_INT64, but are always dealt with as uint64_t in code as
they potentially could exceed the 32-bit range.
To resolve this issue, introduce as special wildcard attribute
type BLOBMSG_CAST_INT64 which should only be used in policies used
by blobmsg_parse(). If used for an attribute in the policy,
blobmsg_parse shall accept all integer types and allow the user
to retrieve the value using the uint64_t blobmsg_cast_u64() and
int64_t blobmsg_cast_s64() functions which is also introduced by this
commit.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ran into some issues with my fd event being garbage collected. As I
never wanted to call :delete, I had seen no reason to keep the returned
object, as my callback and upvalues were still valid.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Instead of having to adjust the index repeatedly as the stack is
manipulated, use absolute addressing for the function arguments, so they
stay the same throughout the call. Zero functional change, just
subjectively easier to follow variables.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Actually check for flags being valid, instead of simply ignoring the
call if flags was zero.
Use standard lua checks for the function argument, so you can get a
normal "argument #2 was invalid, expected function, got xxx" instead of
the vague, "invalid arg list"
Signed-off-by: Karl Palsson <karlp@etactica.com>
Those functions were moved out of blobmsg.h.
Fixes: 0918243e90 ("move json formatting to the blobmsg_json library")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
blobmsg_check_attr_len was calling blobmsg_check_data for some, but not all
attribute types. These checks was missing for arrays and tables.
Additionally, the length check in blobmsg_check_data was a bit off, since
it was comparing the blobmsg data length against the raw blob attr length.
Fix this by checking the raw blob length against the buffer length in
blobmsg_hdr_from_blob
Signed-off-by: Felix Fietkau <nbd@nbd.name>
blobmsg_hdr_valid_namelen was omitted when name==false
The blob_len vs blobmsg_namelen changes were not taking into account
potential padding between name and data
Signed-off-by: Felix Fietkau <nbd@nbd.name>
