Commit graph

18500 commits

Author SHA1 Message Date
Ainy Kumari
fc681995cf Increase MAX_NL80211_NOISE_FREQS in survey dump handler for 6 GHz
The current value of 50 is not sufficient for getting survey info for
all the frequencies when the 6 GHz band is enabled. Increase the limit
to 100 to be able to receive survey info for 6 GHz frequencies also.

Signed-off-by: Ainy Kumari <quic_ainykuma@quicinc.com>
2023-05-25 18:58:20 +03:00
Veerendranath Jakkam
df2f22faf9 MLD STA: Use AP MLD address as previous BSSID for reassociation requests
The Linux kernel expects to use the AP MLD address in
NL80211_ATTR_PREV_BSSID for reassociation requests when the current
association is MLO capable.

Previously, wpa_supplicant was using the BSSID value in
NL80211_ATTR_PREV_BSSID even if the connection is MLO capable. Fix this
by sending the AP MLD address in NL80211_ATTR_PREV_BSSID for
reassociation requests when MLO is used.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-05-25 18:06:50 +03:00
Veerendranath Jakkam
199b44213c MLD STA: Allow auth frames without ML IE for failure status codes
In some cases like unknown-group rejection, AP MLD can't parse the
received Authentication frame to the point of the Multi-Link element if
the group used by the peer is unknown to the AP MLD.

In such cases, AP MLD not including Multi-Link element in rejection
Authentication frames can be considered as standard compliant since AP
MLD doesn't know whether the received Authentication frame has
Multi-Link element or not.

To avoid connection issues in such cases, don't reject Authentication
frames without Multi-Link element when status code is other than
WLAN_STATUS_SUCCESS, WLAN_STATUS_SAE_HASH_TO_ELEMENT,
WLAN_STATUS_SAE_PK, and WLAN_STATUS_ANTI_CLOGGING_TOKEN_REQ.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-05-25 18:03:58 +03:00
Shivani Baranwal
57386a647a Add QCA vendor command to indicate STA MLD setup links removal
Add a new vendor command and attributes to indicate STA MLD setup links
removal.

Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
2023-05-25 17:27:27 +03:00
Shivani Baranwal
527cf095fe Add QCA vendor command to notify TID-to-Link mapping changes
Add a new vendor command and attributes to notify TID-to-link mapping
changes to the userspace.

Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
2023-05-25 17:22:04 +03:00
Sathishkumar Muruganandam
a1601aaa66 WPS: Fix multi-ap fronthaul association
Setting 4addr mode on fronthaul BSS breaks WPS association on backhaul
STA which is still on 3addr mode.

Fix the interop issue by not setting 4addr mode on fronthaul BSS with
WPS instead of setting by default for multi-ap case.

Fronthaul BSS for non-WPS STA shall continue to use 4addr mode.

Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
2023-05-25 17:16:31 +03:00
Adil Saeed Musthafa
2885660318 Store pmk_r1_name derived with wpa_ft_local_derive_pmk_r1() properly
The parameter req_pmk_r1_name was not used at all in the function
wpa_ft_local_derive_pmk_r1(). In addition, the PMK-R1-NAME should be
updated in this function along with the PMK-R1. This means the parameter
should change from "req_pmk_r1_name" to "out_pmk_r1_name" to match the
design used for other paths that derive the PMK-R1.

sm->pmk_r1_name needs to be properly updated when pmk_r1_name is derived
from the local pmk_r0.

Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
2023-05-25 17:11:59 +03:00
Adil Saeed Musthafa
e978072baa Do prune_association only after the STA is authorized
Prune-associations should be done only after the new station is
authorized. Otherwise any STA can cause denial of service to connected
stations in PMF case when more than a single interface is being
controlled by the same hostapd process.

Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
2023-05-25 17:08:57 +03:00
Kiran Kumar Lokere
a2c09eb95e Define a QCA vendor attribute to update the CTS channel width
Define a new QCA vendor attribute to configure channel bandwidth to the
driver for CTS frame transmission. This is used for testing purposes.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-05-22 20:05:48 +03:00
Purushottam Kushwaha
e49c3df630 Add a new driver feature flag for enhanced audio experience over WLAN
Add QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN in
enum qca_wlan_vendor_features to indicate the device supports enhanced
audio experience over WLAN feature.

Also, update the documentation where other subcommand(s) or attribute(s)
require this new feature flag. These subcommand(s) and attributes are
under development and would be restricted to the supported drivers
advertising QCA_WLAN_VENDOR_FEATURE_ENHANCED_AUDIO_EXPERIENCE_OVER_WLAN.
As such, it is still acceptable to introduce a new requirement for the
previously defined interface.

Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
2023-05-22 20:02:01 +03:00
Gururaj Pandurangi
cc8a09a48a Add vendor attributes for forcing MLO power save and STR TX
Add vendor attributes for EHT testbed STA configuration.
This includes enabling STR MLMR mode and forcing power save
on active MLO links for a defined number of beacon periods.

Signed-off-by: Gururaj Pandurangi <quic_panduran@quicinc.com>
2023-05-04 18:20:59 +03:00
Gururaj Pandurangi
c0e12a5183 Add vendor attributes for EHT OM control, EMLSR padding delay
Add vendor attributes related to MLO and EMLSR mode
capability configuration for EHT testbed STA. It includes
EHT OM control support and EMLSR padding delay configuration.
Also, generalise the naming of HE OMI control enumeration to
OMI control as it now consists of both HE and EHT OMI control
fields.

Signed-off-by: Gururaj Pandurangi <quic_panduran@quicinc.com>
2023-05-04 18:02:02 +03:00
Jouni Malinen
3e9fe727e5 tests: WPA2-EAP AP with PMF required and EAPOL-Logoff
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-05-04 11:10:16 +03:00
Jouni Malinen
386d59e00d Do not disconnect EAPOL-Logoff before authentication
Some station devices are apparently sending the EAPOL-Logoff message in
some cases before the initial authentication for WPA2/WPA3-Enterprise.
hostapd would have forced a "post EAP-Failure" disconnection in 10 ms
for such cases while still allowing the EAP authentication to try to
complete.

This is not ideal and could result in interoperability issues, so skip
the forced disconnection in the particular case where the EAPOL-Logoff
message is received before the first authentication is completed.

In addition, disconnect the STA without starting new EAP authentication
and the 10 ms delay if an EAPOL-Logoff message is received after
authentication has been completed successfully. This results in cleaner
behavior by avoiding the extra start of a new EAP authentication in a
case where the STA is going to be disconnected shortly.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-05-04 11:10:16 +03:00
Jintao Lin
7337232203 wpa_supplicant: Skip scan before starting a BSS in AP mode
When starting a new BSS as AP mode, the network configs have been passed
in from the BSS config. There is no need to scan before creating a new
BSS. Reuse connect_without_scan structure member to bypass scan when the
mode is WPAS_MODE_AP.

Signed-off-by: Jintao Lin <jintaolin@chromium.org>
2023-04-28 21:06:10 +03:00
Nick Hainke
f45cf609c7 wpa_supplicant: Fix compiling without IEEE8021X_EAPOL
If IEEE8021X_EAPOL is not defined wpa_supplicant will not compile with
following error:

  events.c: In function 'wpa_supplicant_connect':
  events.c:1827:14: warning: implicit declaration of function 'eap_is_wps_pbc_enrollee' [-Wimplicit-function-declaration]
   1827 |         if ((eap_is_wps_pbc_enrollee(&ssid->eap) &&
        |              ^~~~~~~~~~~~~~~~~~~~~~~
  events.c:1827:43: error: 'struct wpa_ssid' has no member named 'eap'
   1827 |         if ((eap_is_wps_pbc_enrollee(&ssid->eap) &&
        |                                           ^~

Add ifdef statements around the calling function to fix the issue.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2023-04-28 20:59:30 +03:00
Benjamin Poirier
c62e94d793 Add missing driver entries to wpa_supplicant documentation
There are possible more entries missing but I added only the ones I was
actually able to build.

Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
2023-04-28 20:53:24 +03:00
Andrew Pope
9122b60ffd DPP: Remove argument requirement for DPP push button command
The hostapd_cli command to initiate DPP push button mode mandates at
least one argument to be provided. Arguments provided to the command
are used to optionally supply configuration options when running in
this mode. They are not strictly required for DPP push button mode to
start. This patch removes the min requirement check on the command.

Signed-off-by: Andrew Pope (andrew.pope@morsemicro.com)
2023-04-28 17:55:38 +03:00
Gururaj Pandurangi
397d432f60 Add vendor attributes for MLO link active, EMLSR entry/exit
Add vendor attributes related to MLO and EMLSR mode
capability configuration for EHT DUT. This includes forcing
active MLO links and invoking EMLSR mode entry or exit.

Signed-off-by: Gururaj Pandurangi <quic_panduran@quicinc.com>
2023-04-28 10:39:55 +03:00
Jouni Malinen
230ca559cb tests: Additional 6 GHz band ACS coverage
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-26 23:10:03 +03:00
Jouni Malinen
c4034a69fe tests: Update regulatory database to VMs
Update the wireless-regdb database to the wireless-regdb.git version of
2023-02-13.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-26 23:10:03 +03:00
Jouni Malinen
5d285040d6 Rename VHT elements to match the standard
Some of the information elements added in IEEE Std 802.11ax-2013 for VHT
purposes have since then been taken into use for other cases and renamed
to remove the "VHT" prefix in the standard. Update the defines for those
elements in the implementation to match the names used in the current
standard.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-26 23:10:03 +03:00
Ramya Gnanasekar
8f8f68ba67 hostapd: Support channel switch to 320 MHz channels
Add validatation of center frequency, and filling of appropriate
bandwidth in the channel switch wrapper when the channel switch is done
to a 320 MHz channel.

Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
2023-04-26 23:10:03 +03:00
Jouni Malinen
4d0743d5e5 Fix file mode bits
The execute bits were not supposed to be added to a source code file.

Fixes: 927dbfb453 ("Fix 40 MHz channel bringup with ACS on the 6 GHz band")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-26 23:10:03 +03:00
Jouni Malinen
a2d4d4c98e tests: HE with ACS on 6 GHz using a 40 MHz channel
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-25 17:31:13 +03:00
Jouni Malinen
d930211bdd Select 6 GHz mode correctly for ACS cases
Use the op_class configuration to determine whether to select the 5 GHz
or 6 GHz mode for ACS. Without this, the first mode (5 GHz in most
cases) would have been selected regardless of the op_class value.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-25 17:29:46 +03:00
Hari Chandrakanthan
927dbfb453 Fix 40 MHz channel bringup with ACS on the 6 GHz band
When AP is brought up in HE40/EHT40 with ACS, the AP comes up with 20
MHz bandwidth. It is expected to come up with 40 MHz bandwidth.

conf->secondary_channel does not hold the correct value and it leads to
choosing 20 MHz in hostapd_set_freq_params(). conf->secondary_channel is
filled using the hostapd config he_oper_centr_freq_seg0_idx. When AP is
configured to use ACS, the hostapd config he_oper_centr_freq_seg0_idx is
not valid as the channel is not known during bring up. So using the
config he_oper_centr_freq_seg0_idx to fill the conf->secondary_channel
does not work with ACS.

Use op_class to determine the bandwidth and based on the bandwidth fill
the conf->secondary_channel to address this ACS case.

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
2023-04-25 17:05:52 +03:00
Veerendranath Jakkam
8bc84fceeb Allow MLO disabled connection to legacy open/WPA2-Personal-only AP MLDs
wpa_supplicant was skipping MLD APs from network selection when the AP
advertise legacy open, WPA2-Personal-only (PSK without SAE), or PMF
disabled. However, there are already some early Wi-Fi 7 APs in the
market which advertise legacy open, WPA2-Personal-only, or PMF disabled
even though these combinations are unlikely to be allowed for Wi-Fi 7 in
the end.

To avoid connectivity issues with such APs, allow stations to connect
with MLO disabled when an AP MLD is detected to advertise legacy open,
WPA2-Personal-only (PSK without SAE), or PMF disabled.

This reverts commit 7d8b96dcfd ("wpa_supplicant: Apply same
restrictions for MLD as for 6 GHz BSS") except WEP and TKIP checks,
i.e., AP MLDs which advertise only WEP or TKIP are still skipped from
network selection.

For the SME-in-wpa_supplicant case, skip configuring MLD parameters to
the driver if the STA can connect only in legacy open,
WPA2-Personal-only, or PMF disabled mode. For the SME-in-driver case, it
is the driver's responsibility to initiate connection with MLO disabled
with such APs.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-25 17:04:44 +03:00
Jouni Malinen
b9c3b57a99 Update AP RSNE/RSNXE to RSN state machine on driver-selected BSS cases
The driver-initiated BSS selection case and the "Network configuration
found for the current AP" case ended up clearing the RSN state machine
information on AP RSNE/RSNXE. That could result in incorrect behavior if
some key management operations depended on accurate information. For
example, this could result in not deriving the KDK as part of the PTK
derivation and failing to complete 4-way handshake if both the AP and
the STA indicated support for Secure LTF.

If the scan results for the selected BSS are available, use those to
update the RSN state machine AP RSNE/RSNXE similarly to the way this is
done with wpa_supplicant selects the BSS instead of clearing that
information in the RSN state machine.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-25 13:30:08 +03:00
Jouni Malinen
566ab39a72 tests: KDK derivation based on Secure LTF capability
This adds more production-like testing coverage for KDK derivation. Both
SAE and OWE transition mode are covered. The latter has some corner
cases that did not work correctly previously.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-25 12:08:12 +03:00
Jouni Malinen
6972b0fa2b OWE: Update transition mode information on selecting a new BSS
It is possible for a new BSS entry to be added for the
hidden-SSID-OWE-BSS when running a new scan after having previously
learned the hidden SSID during a previous OWE connection attempt. That
new entry would not necessarily have the WPA_BSS_OWE_TRANSITION flag set
and that would result in not being able to recognize the appropriate OWE
profile when checking the association event against the transition mode
configuration.

Fix this by updating the BSS entry for OWE transition mode information
for the cases where this might happen.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-25 12:04:01 +03:00
Xinyue Ling
f54ce74335 Fix determining mode for 6 GHz band when using hw_mode=any
When 6 GHz band is specified and hw_mode parameter is set to any,
hostapd_determine_mode() may determine the wrong mode because there are
two hw modes (5 GHz and 6 GHz) with HOSTAPD_MODE_IEEE80211A. This will
cause 6 GHz AP to fail to start. Fix this by adding a check similar to
the changes in commit 99cd453720 ("hw_feature: Correctly select mode
in case of the 6 GHz band") into hostapd_determine_mode().

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-21 21:15:00 +03:00
Shivani Baranwal
5b568b21ae Add support to fetch link layer stats per MLO link
IEEE 802.11be enables multiple links between STA and AP. Each of the
link has its own set of statistics. Add additional attributes required
to fetch link layer statistics per MLO link.

For MLO connection, per MLO link statistics will be sent with the new
attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK. Also, cumulative
statistics of all the MLO links will be sent outside
QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to be compatible with legacy user
space.

For non-MLO connection, the statistics will be sent without being nested
inside QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK attribute.

Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
2023-04-20 10:55:50 +03:00
Shivani Baranwal
6422b0d72d Fix vendor attribute numbering and relocate attribute accordingly
The attributes QCA_WLAN_VENDOR_ATTR_LL_STATS_PAD and
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NF_CAL_VAL were allocated the same
attribute number in error. QCA_WLAN_VENDOR_ATTR_LL_STATS_PAD attribute
is known to not be used; thus, it is safe to be renumbered.

Fixes: 1491fc64a8 ("Define QCA vendor per-enum 64-bit pad attributes")
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
2023-04-20 10:44:24 +03:00
Chunquan Luo
c858a6360b Add a vendor specific roam status of background scan abort
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".

Signed-off-by: Chunquan Luo <quic_chunquan@quicinc.com>
2023-04-20 10:37:52 +03:00
Aditya Kodukula
b171c5e4d5 Update QCA LL_STATS vendor command
Define bitmap values used by LL_STATS vendor command
and update the corresponding kernel documentation.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-19 11:56:56 +03:00
Veerendranath Jakkam
6002fe87d8 SAE: Fix expected AP MLD address info in a debug print
Print correct expected AP MLD address information when the AP MLD
address validation fails in Authentication frames during external
authentication.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-19 11:51:43 +03:00
Veerendranath Jakkam
c70405cef6 MLD STA: Do not fail on unknown IEs in Authentication frames
Fail MLD address validation only if Authentication frames IE parsing
actually failed, i.e., ignore all unknown IEs.

This is needed to avoid authentication failure when the Authentication
frames include IEs which are not handled by ieee802_11_parse_elems(),
e.g., AKM Suite Selector IE.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-19 11:50:55 +03:00
Xin Deng
f8931fcbaf hostapd: Restore the flow of set beacon and WPA key init
hostapd start AP flow changed in commit 931e5d4f9e. However, that
could cause a regression in a legacy AP driver where the set key
operation for GTK, IGTK, and BIGTK before AP start (set beacon) would
cause the driver to ignore the key set command. Restore the flow of the
set beacon and WPA key init operations to make sure drivers can receive
and set group keys correctly.

Fixes: 931e5d4f9e ("mbssid: Configure all BSSes before beacon setup")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-19 11:47:52 +03:00
Chaoli Zhou
e8912452ed Export wpa_supplicant config item 'he' for external configuration
Export the "he" network profile item to be configurable from external
client side, like wpa_cli or NetworkManager. This follows the earlier
changes to allow the previously internal-only parameter (e.g., vht) to
be used for additional purposes for AP mode.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2023-04-19 11:34:38 +03:00
Veerendranath Jakkam
9932ff30c4 Allowed frequency list configuration for AP operation
Add support to configure the allowed frequency list for AP operation
using a QCA vendor interface before NL80211_CMD_NEW_BEACON/
NL80211_CMD_START_AP. hostapd generates the allowed frequency list by
intersecting user configured frequency list and all the frequencies
advertised by the driver including disabled channels. If user doesn't
specify allowed frequency list, all the frequencies advertised by the
driver, including disabled channels, will be configured.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-19 11:32:07 +03:00
Jouni Malinen
9bad3c975d tests: Update server and user certificates (2023)
At least some of the previous versions have expired, so need to re-sign
these to avoid EAP test case failures. This contains updates from
running tests/hwsim/auth_server/update.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2023-04-18 11:40:10 +03:00
Jouni Malinen
07a7bcd7ea WMM: Advertise support for 16 PTKSA replay counters for non-AP STA
In theory, each device that supports WMM (or the IEEE 802.11 QoS for
that matter) is expected to advertise how many replay counters it
supports and the peer device is supposed to use that information to
restrict the total number of different MSDU priorities (AC/UP) that
might be used. In practice, this is not really done in deployed devices
and instead, it is just assumed that everyone supports the eight
different replay counters so that there is no need to restrict which
MSDU priorities can be used.

hostapd implementation of WMM has advertised support for 16 PTKSA replay
counters from the beginning while wpa_supplicant has not had any code
for setting the supported replay counter fields in RSNE, i.e., has left
the value to 0 which implies that only a single replay counter is
supported. While this does not really result in any real issues with
deployed devices, this is not really correct behavior based on the
current IEEE 802.11 standard and the WMM specification.

Update wpa_supplicant to use similar design to the hostapd RSNE
generation by setting the number of supported PTKSA replay counters to
16 whenever WMM is enabled. For now, this is done based on the
association being for HT/VHT/HE/EHT and also based on the AP supporting
WMM since it is much more likely for the local device to support WMM and
eight replay counters (which can be indicated only with the value that
implies support for 16 counters since there is no separate value for 8).

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-18 11:40:10 +03:00
Aloka Dixit
ac54b61273 nl80211: Support for RNR elements
Add new nested netlink attribute, NL80211_ATTR_EMA_RNR_ELEMS, to send
the reduced neighbor report (RNR) elements to the driver when EMA is
enabled. This attribute includes the count of RNR elements and data at
each index. While generating EMA beacons, the driver will include RNR
group at a given index along with MBSSID group. The last element, if
present, has RNR data common for all EMA beacons such as neighbor APs.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-04-18 11:39:32 +03:00
Aloka Dixit
5d06acefdd RNR: Add elements by default for EMA AP
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of
a nontransmitted BSSID profile, an EMA AP that transmits a Beacon
frame carrying a partial list of nontransmitted BSSID profiles
should include in the frame a Reduced Neighbor Report element
carrying information for at least the nontransmitted BSSIDs that
are not present in the Multiple BSSID element carried in that frame.

Add this support by splitting the reduced neighbor report (RNR) in as
many elements as the number of multiple BSSID elements. Each RNR element
excludes the non-transmitting profiles already included in the MBSSID
element at the same index. If present, the last additional group will
have the data common for all EMA beacons such as neighbor AP information
gathered through neighbor reports.

The hwsim test case he_ap_ema demonstrates this support.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-04-18 11:35:06 +03:00
Aloka Dixit
8f1d384197 RNR: Skip interfaces on the same radio for MBSSID
Do not include interfaces on the same radio in reduced neighbor
report elements (RNR) as multiple BSSID elements from the same
management frame already include these if MBSSID feature is enabled.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-04-18 11:14:07 +03:00
Jouni Malinen
921f82cf18 Sync with wireless-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2023-03-30.

Signed-off-by: Jouni Malinen <j@w1.fi>
2023-04-06 13:03:23 +03:00
Veerendranath Jakkam
302d761a85 Add QCA vendor feature flag for allowed frequency list
Add a vendor feature flag for the driver to indicate support for allowed
frequency configuration in AP mode.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-03 23:09:07 +03:00
Ainy Kumari
44c38af04f Add QCA vendor interface to get connected channels utilization
Add a new vendor command to trigger computation of connected channel
statistics such as channel utilization in STA mode.

Signed-off-by: Ainy Kumari <quic_ainykuma@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-03 23:04:13 +03:00
Veerendranath Jakkam
bb4560252d Add QCA vendor attribute to configure list of allowed frequencies for AP
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST
to configure the full list of allowed frequencies for the AP operation.
The configuration is valid only from the next BSS start until the BSS is
stopped. The drivers shall filter out channels on top of this list of
channels based on regulatory or other constraints. This can be used to
specify user's choice of frequencies, allowed list of channels with
static puncturing feature, etc.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-03 23:00:00 +03:00