RSA low-level routines were deprecated in OpenSSL 3.0.
EVP_PKEY_get_bits(), or its older and more backwards compatible name
EVP_PKEY_bits() can be used here instead.
Signed-off-by: Jouni Malinen <j@w1.fi>
EVP_PKEY_get0_EC_KEY() and EC_KEY_get0_group() were deprecated in
OpenSSL 3.0. Add a version of this by determining the group without
fetching the EC_KEY itself from an EVP_PKEY.
Signed-off-by: Jouni Malinen <j@w1.fi>
EC_GROUP_get_curve_GFp() was deprecated in OpenSSL 3.0.
EC_GROUP_get_curve() can be used to do the exact same thing. Add a
backwards compatibility wrapper for older OpenSSL versions to be able to
use this newer function.
Signed-off-by: Jouni Malinen <j@w1.fi>
The first sock.recv() may return both the status,RUNNING and the
following status line if the sigma_dut process ends up being faster in
writing the result than the test script is in reading the result. This
resulted in unexpected behavior and odd error messages when parsing the
result in the test cases. Fix this by dropping the status,RUNNING line
from the result in case the buffer includes multiple lines.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 3.0 deprecated EVP_PKEY_cmp() and replaced it with EVP_PKEY_eq()
which is not available in older versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
Since commit 200c7693c9 ('Make WEP functionality an optional build
parameter'), WEP support is optional and, indeed, off by default.
The distributions are now catching up and disabling WEP in their builds.
Unfortunately, there's no indication prior to an attempt to connect to a
WEP network that it's not going to work. Add a capability to communicate
that.
Unlike other capabilities, this one is negative. That is, it indicates
lack of a WEP support as opposed to its presence. This is necessary
because historically there has been no capability to indicate presence
of WEP support and therefore NetworkManager (and probably others) just
assumes it's there.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Davide Caratti <davide.caratti@gmail.com>
There can be some discrepancy between the theorical dfs cac end (as
computed with the cac duration and cac start) and the actual cac end as
reported by the driver. During that window, the value of remaining time
outputed by the status command on the socket control interface will
display an overflowed, invalid value.
To mitigate this lets compute the remaining time as signed and display
it only when positive, otherwise defaulting it to 0.
Status command shows something like that when polling every seconds:
state=DFS
cac_time_seconds=60
cac_time_left_seconds=1
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=0
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=4294967294
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=4294967293
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=4294967292
...
state=ENABLED
cac_time_seconds=60
cac_time_left_seconds=N/A
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
The current code generates a warning when compiled by Clang, because if
we goto 'fail:', password_len can be uninitialised when we pass it in to
bin_clear_free().
Note that the actual usage is safe, because bin_clear_free() ignores
the second argument if the first argument is NULL, but it still seems
worth cleaning up.
Signed-off-by: Alasdair Mackintosh <alasdair at google.com>
CurrentAuthMode should be set as a real auth type when authentication is
in progress. wpa_supplicant has a property "State" which indicates the
authentication stage already. I think setting auth mode as "INACTIVE" in
all auth progress stages is not a good idea, because sometimes we need
to handle this connection according to the auth type even when
authentication is not complete. For example, NetworkManager may recall
ask-password-dialog when auth mode is "wpa-psk" and "sae", try next
access point when auth mode is "EAP-xx" when password is incorrect.
Since "CurrentAuthMode" is set as "INACTIVE" in all not fully completed
situations, we do not know how to handle it.
Signed-off-by: Aris Aachen <chenyunxiong@unionitech.com>
Signed-off-by: ArisAachen <chenyunxiong@uniontech.com>
The EST server does not have to be sharing the same host name with the
OSU server. Use the host name from the EST URL instead of the SPP server
URL when validating the EST server certificate.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This makes it easier for non-SOAP cases to validate HTTP server name
(from the URL) match against the certificate.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make the error reason clearer in the event log for the case where the
requested realm has not been configured.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
hs20-osu-client compilation fails on Android O onwards because of
undefined reference for __android_log_print/__android_log_vprint.
Modify hs20-osu-client's Android.mk to include liblog library and use
tag 'hs20-osu-client' in logcat logs. Additionally, compile
hs20-osu-client to /vendor/bin in non-production builds.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add QCA_WLAN_TWT_NOTIFY command type to send event to userspace when AP
changes TWT required bit field in its capabilities.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add support for new QCA nested attributes to pass the AFC channel
information as part of the external ACS request command,
EXTERNAL_ACS_EVENT_CHAN_INFO.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This test case was assuming the Configurator would change the
netAccessKey curve every time based on the protocol keys, but that is
not the case anymore, so force that change here for a negative test.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This test case was assuming the Configurator would change the
netAccessKey curve every time based on the protocol keys, but that is
not the case anymore, so force that change here for a negative test.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is mainly for testing purposes to allow a Configurator to the curve
between provisioning cases. This would not work for real deployement
cases unless every Enrollee were reconfigured.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
DPP network introduction requires all devices to use the same curve for
netAccessKey. Enforce that this happens based on hardcoding the curve
based on the first successful configuration object generation if no
explicit configuration of the curve was used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is not properly defined in the technical specification and will
need to be clarified there. Change the implementation to use a design
that is more likely to be used in the cleaned up tech spec.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow the Configurator to be configured to use a specific curve for the
netAccessKey so that it can request the Enrollee to generate a new key
during the configuration exchange to allow a compatible Connector to be
generated when the network uses a different curve than the protocol keys
used during the authentication exchange.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The encoded CSR could have been leaked if another memory allocation were
to fail in this function. Use a shared return path to free the allocated
temporary buffers to avoid this.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Extend dpp_test testing functionality to allow the Protocol Version
attribute to be removed or modified to invalid value in Reconfig
Authentication Request.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow PKEX v1-only or v2-only behavior to be specific for the Responder
role. This is mainly for testing purposes.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a QCA vendor attribute to enable FFT recapture on user trigger.
Enable FFT recapture only when spectral scan period is greater than 52
us.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow the first Tunnel-Password RADIUS entry to be used for SAE in
addition to the sae_password entries and wpa_passphrase parameters from
the static configuration file.
Signed-off-by: Mario Hros <git@reversity.org>
Report background radar/CAC detection capability if supported
by the underlying driver/hardware.
Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Introduce type parameter to dfs_get_valid_channel() routine to allow
selection of a radar-only channel where the CAC detection has not been
performed yet. This is a preliminary patch to enable background
radar/CAC detection.
Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
This is a preliminary change to introduce radar/CAC background detection
support.
Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Commit a41a29192e ("build: Pull common fragments into a build.rules
file") introduced a regression into wpa_supplicant build process. The
build target libwpa_client.so is not built regardless of whether the
option CONFIG_BUILD_WPA_CLIENT_SO is set or not. This happens because
this config option is used before it is imported from the configuration
file. Moving its use after including build.rules does not help: the
variable ALL is processed by build.rules and further changes are not
applied. Similarly, option CONFIG_NO_WPA_PASSPHRASE also does not work
as expected: wpa_passphrase is always built regardless of whether the
option is set or not.
Re-enable these options by adding both build targets to _all
dependencies.
Fixes: a41a29192e ("build: Pull common fragments into a build.rules file")
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Do not use the first octet of the PPE Thresholds field without
explicitly confirming that that octet was included in the element.
Furthermore, allow the received element to have additional octets in the
end since IEEE Std 802.11ax-2021 defines this to be an extensible
element and new fields could be added to the end of it in the future.
Fixes: 0497e41481 ("HE: Fix HE Capabilities element size")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The previously used calculation was not correct for the cases where the
extra padding field was needed. Fix this by properly calculating the
number of full octets in the field.
Fixes: 0497e41481 ("HE: Fix HE Capabilities element size")
Signed-off-by: Shiva Sankar Gajula <quic_sgajula@quicinc.com>
Do not leave a large number of network added/removed events remaining
for the following test case to handle. This removes some possible
failure test case sequences like the following one:
wpas_ctrl_many_networks dbus_ap_scan_2_ap_mode_scan
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
