Add support for TWT responder for AP operating in HT and VHT modes by
introducing a new configuration parameter ht_vht_twt_responder. When
this is enabled, TWT responder mode support in HT and VHT modes is
enabled if the driver supports this and is disabled otherwise.
Signed-off-by: Manaswini Paluri<quic_mpaluri@quicinc.com>
Add a feature flag to indicate driver support for TWT responder for AP
operating in HT and VHT modes.
Signed-off-by: Manaswini Paluri<quic_mpaluri@quicinc.com>
At least some of the previous versions have expired, so need to re-sign
these to avoid EAP test case failures. This contains updates from
running tests/hwsim/auth_server/update.sh.
Signed-off-by: Jouni Malinen <j@w1.fi>
i802_sta_deauth() already has the link_id passed to it in its arguments.
Use that to pass it down to send MLME handler as well.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Function nl80211_link_add() created the link add netlink message on drv
basis which in turn always uses the drv's first BSS. To support link add
for various other interfaces, use the per-BSS function to create the
netlink message.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
for_each_mld_link() macro used three nested for loops. Since now the
affliated links are linked together via a linked list, the logic can be
improved by using dl_list_for_each() macro instead which uses one for
loop.
Modify for_each_mld_link() macro to use dl_list_for_each() instead.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Add a test behaving like an Asus RT-AC53 with firmware
3.0.0.4.380_10760-g21a5898, which (in some cases?) can have an ECSA
element stuck in the probe response, when the channel switch is long
finished.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a few tests to validate what happens with connections
while an AP is doing CSA:
- quiet to diff channel (shouldn't connect)
- quiet to same channel (shouldn't connect)
- non-quiet to diff channel (shouldn't connect)
- non-quiet to same channel (should connect)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for additional (vendor) elements to be added
to only Probe Response frames, for testing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the build path is long, the contents of the _DIRS variable can be
very long, since it repeats the same directories very often. In some
cases, this has triggered an "Argument list too long" build error.
Reported-by: Robert Marko <robimarko@gmail.com>
Suggested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If authentication fails repeatedly, e.g., because of a weak signal, the
link can end up in blocked state. If one of the nodes tries to establish
a link again before it is unblocked on the other side, it will block the
link to that other side. The same happens on the other side when it
unblocks the link. In that scenario, the link never recovers on its own.
To fix this, allow restarting authentication even if the link is in
blocked state, but don't initiate the attempt until the blocked period
is over. This reverts commit 09d96de09e ("mesh: Drop Authentication
frames from BLOCKED STA").
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This fixes a segmentation fault on STA disconnect in case IPv6 addresses
where learned for the STA based on snooped neighbor solicication.
Fixes: bd00c4311c ("AP: Add Neighbor Discovery snooping mechanism for Proxy ARP")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
RRM link measurement request/report management frames are used to get
the radio link information between the connected stations.
Add new hostapd_cli command req_link_measurement to send an RRM link
measurement request to an associated station. Add support to handle the
link measurement report in hostapd.
RRM link measurement support can be enabled with the following new
configuration parameter:
rrm_link_measurement_report=1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com>
The DTIM information in the per-STA profile is set incorrectly. The DTIM
period is set in the LSB octet of the DTIM Info subfield (2 octets),
which is intended for the DTIM count.
Fix this by setting the DTIM period and DTIM count information properly
to the MSB and LSB octets of the DTIM Info subfield, respectively.
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
When we are configuring automatic channel selection, we are not able to
switch to a given DFS channel because when we are trying to move to a
DFS channel, the interface is disabled and enabled again. When the
interface is disabled and enabled we are setting iface's freq and
channel to 0 in setup_interface2() in case ACS is enabled, and now we
don't know to which channel we were trying to move. Now ACS will run and
the interface will be up in the channel that is suitable.
To fix this issue add a flag named is_ch_switch_dfs to check if the
channel switch request is for a DFS channel and we can use this in
setup_interface2() to decide whther we have to set iface's freq and
channel to 0 or not. This way iface's freq and channel will retain the
values while channel switching to a DFS channel when ACS is enabled.
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Add a new flag radar_detected which is used in the following cases
when setting up a link on a DFS channel while the interface is not yet
enabled:
1. DFS link received CAC start event
2. If no radar detected, link setup succeeeds after CAC end
event is received. Else go to 3.
3. Radar detected on this link -> set radar_detected bit
4. CAC end received for the current freq -> Do not setup interface
as radar already detected. Clear radar_detected bit.
5. The driver sends channel switch event to switch to another channel
a. Switch to another DFS channel -> go to 1
b. Switch to non-DFS channel -> proceed to set up interface
Or when receiving a CAC start event when the interface is already set up:
1. DFS link already set up successfully
2. Radar detected on this link -> set radar_detected bit
a. Switch to DFS channel
a.1. CAC start -> clear radar_detected bit and partner RNR
a.2. If radar detected, go to 2.
a.3. CAC end -> clear radar_detected bit
a.4. Link enabled successfully
b. Switch to non-DFS channel
b.1 No op and the driver handles this
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
When one link is still under CAC or disabled, peer links should not
carry the information of this link in the RNR elements.
With this change, the RNR element will be included only if a peer link
is in HAPD_IFACE_ENABLED state.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Link ID is more accurate to specify the BSS for a radar event in some
corner cases, e.g., when there is a radar detection event and the driver
then switches to another DFS channel. There will then be two events
coming from the driver (CAC start and channel switch complete). In case
the CAC-start event comes first, hostapd still stores the previous
frequency and cannot find the correct link by calling
nl80211_get_mld_link_by_freq() with the new frequency.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
The AP MLD case missed the "else" branch which handles legacy STA's
disassociation. So this STA's sta_info will not be cleared ever.
Add the "else" check to make sure the sta_info gets cleared.
Fixes: 7ceafb6e9f ("AP MLD: Handle disassociation notification with SME offload to driver")
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
OBSS scan can be required in different links if operating as an AP MLD.
When triggering scan, specify the link ID for the driver to find the
correct link to scan.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
If the driver provides an identifying cookie value for scan operations,
use that to select which link processes the scan result. This is needed
for OBSS scans that can be required in different links if operating as
an AP MLD. Distinguish the scans using scan_cookie for QCA vendor scan
events.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
In AP MLD case, HT scan results need to be handled in the link that
triggered this scan. So find the link that has a valid scan_cb to handle
EVENT_SCAN_RESULTS.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Modules that use libpasn for PASN authentication need the context of
PASN data. PASN data is a common context for the library and the modules
using it. Hence, initialize the context through init and deinit
functions. Also use set and get functions to update the parameters.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
PMKSA cache API is included in libpasn.so used by external modules,
e.g., Wi-Fi Aware. To avoid dependency on IEEE8021X_EAPOL define for the
external modules at compile time, remove PMKSA cache static inline
functions from the header file and add wrapper function stubs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
PTKSA cache API is included in libpasn.so used by external modules,
e.g., Wi-Fi Aware. To avoid dependency on CONFIG_PTKSA_CACHE define for
the external modules at compile time, remove PTKSA cache static inline
functions from the header file and add wrapper function stubs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Verify that the Extended Capabilities element for the TX BSS shows
beacon protection disabled and the Extended Capabilities element for the
non-TX BSS (within the Multiple BSSID element) shows it enabled.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add the Extended Capabilities element for a non-TX BSS into the non-TX
BSSID profile subelement in the Multiple BSSID element if the non-TX BSS
has different extended capabilities than the TX BSS.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new attribute QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_IFINDEX
for QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT subcommand to
apply rules for avoid frequencies on a specific netdev. This is a
32-bit unsigned optional attribute.
Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
These can cause unexpected test failures, so dump the pending monitor
socket events more frequently in some cases where event throttling is
seen.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This reverts commit bffd2b3994.
Revert this commit to fix a regression when setting up P2P Group Owner
on some old device.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Try to find the BSS entry that contains the most likely current
information for the target BSS. This is mainly needed to avoid some
unusual behavior with APs changing their Beacon frame information in a
manner that shows up in automated testing, but this might help with some
more dynamic real world uses as well, so better do the BSS entry search
for the newest entry.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This test could have failed if scan results from a previously executed
test case were still the in the driver cache.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The OpenSSL 3.0 (or newer) version of omac1_aes_vector() did not free
the EVP_MAC. This resulted in a memory leak that shows up in a bit
strange way in valgrind reports and because of that, was not caught
during automated testing.
Fixes: 0c61f6234f ("OpenSSL: Implement CMAC using the EVP_MAC API")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The first link BSS was always disabled last. However, now the first BSS
can be dynamically adjusted. Hence, remove such restriction.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Whenever ap_free_sta() was called, it deleted the whole station entry
from the kernel as well. However, with MLD stations, there is a
requirement to delete only the link station.
Add support to remove the link station alone from an MLD station. If the
link going to be removed is the association link, the whole station
entry will be removed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
When the first link BSS of an interface was de-initialized/disabled, the
whole MLD was brought down. All other links were stopped beaconing and
links were removed. And if the non-first link BSS was
de-initialized/disabled, nothing happened. Even beaconing was not
stopped which is wrong.
Fix this by properly bringing down the intended link alone from the
interface.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Previously, hostapd directly advertised the MLD capabilities received
from the driver. Since this information is exchanged during
initialization time only, the driver will advertise the maximum
supported values. hostapd should parse it and then based on the current
situation fill the values accordingly.
For example, the maximum number of simultaneous links is supposed to be
a value between 0 and 14, which is the number of affiliated APs minus 1.
The driver advertises this value as 5 and hostapd, irrespective of the
current active links, puts 5 in the frames.
Fix this by parsing the value from the driver capabilities and then
using the values as per the current situation of the links. The
advertised values will be used as the upper limit.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>