Commit graph

1718 commits

Author SHA1 Message Date
Ahmad Kholaif
480994dafb nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events
When DFS offloading capability is supported by the driver, the driver
should use these events to indicate when a radar pattern has been
detected, channel availability check (CAC) has been completed, aborted
or finished after the non-occupancy period is over on a DFS channel.

Also, add a new driver.h event to be used by NL80211 to indicate CAC
Started event on a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:51:33 +02:00
Jouni Malinen
106fa1e97e nl80211: Indicate interface-down event only for the main netdev
RTM_NEWLINK event without IFF_UP were processed for all related
interfaces (including VLANs and bridge). While these events may need to
be processed for other purposes, they should not end up claiming that
the main interface has been disabled, so indicate
EVENT_INTERFACE_DISABLED only if the ifname matches the first BSS ifname
for the interface. In addition, fix some of the ifup/down checks from
if_indextoname() cases to actually use the resolved ifname (namebuf)
rather than hardcoding the first configured ifname to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 10:31:12 +02:00
Jouni Malinen
f33c8606f4 Re-enable beaconing on interface disable+enable
This is a step towards enabling hostapd to restart AP mode functionality
if the interface is disabled and re-enabled, e.g., with ifconfig down
and up. This commit takes care of beaconining only which may be
sufficient for open mode connection, but not for WPA2 cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 20:27:00 +02:00
Jouni Malinen
fc99fab7e5 nl80211: Print a debug log entry on NL80211_CMD_PROBE_CLIENT failures
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 20:27:00 +02:00
Jouni Malinen
1db718b3ce nl80211: Test vendor command and event
This adds testing code (for CONFIG_TESTING_OPTIONS=y builds only) to
send an nl80211 vendor command and report a test vendor event in case
the driver supports this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:07:29 +02:00
Masashi Honma
0cb5f8d945 mesh: Fix inactivity timer for 32 bit system
Commit 5a2a6de6a5 ('mesh: Make inactivity
timer configurable') has a problem on 32 bit systems. Setting
NL80211_MESHCONF_PLINK_TIMEOUT to 0xffffffff causes expiration of STA in
a minute by NL80211_CMD_DEL_STATION event. this is the kernel rule for
STA expiration:

(current jiffies) > (frame Rx jiffies + NL80211_MESHCONF_PLINK_TIMEOUT * 250)

On a 32 bit system, the right side could overflow and be unexpected
small value if NL80211_MESHCONF_PLINK_TIMEOUT is sufficiently large. STA
expiration occurs by this reason.

This patch solves the problem by disabling the STA expiration
functionality in mac80211. However, old kernel does not support
disabling it. If so, this patch sets mac80211 inactivity timer 60
seconds into future from the wpa_supplicant inactivity timer.

And I mis-understood that mesh_max_inactivity=0 disables inactivity
timer in wpa_supplicant. This commit fixes it also.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-02-07 22:20:45 +02:00
Jouni Malinen
fa38860c5e nl80211: Fix build with libnl 1.1
Commit 630b3230c8 ('nl80211: Increase
netlink receive buffer size') added unconditional use of
nl_socket_set_buffer_size() which was not included in libnl 1.1. Fix use
of that old version by making this conditional on CONFIG_LIBNL20.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:50:02 +02:00
Jouni Malinen
399e61353a Add Suite B AKMs to key_mgmt capability list
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
5e3b5197cc Add Suite B 192-bit AKM
WPA-EAP-SUITE-B-192 can now be used to select 192-bit level Suite B into
use as the key management method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:52 +02:00
Jouni Malinen
98cd3d1c3b Preparations for variable length KCK and KEK
This modifies struct wpa_ptk to allow the length of KCK and KEK to be
stored. This is needed to allow longer keys to be used, e.g., with
Suite B 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:26:49 +02:00
Jouni Malinen
86f9b1c706 nl80211: Fix default group key management index configuration
The correct nl80211 flag for group key management cipher was set only
for BIP (AES-CMAC-128). The same flag needs to be used with the newer
ciphers BIP-CMAC-256, BIP-GMAC-128, and BIP-GMAC-256.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-24 19:37:42 +02:00
Jouni Malinen
630b3230c8 nl80211: Increase netlink receive buffer size
libnl uses a pretty small buffer (32 kB that gets converted to 64 kB) by
default. It is possible to hit that limit in some cases where operations
are blocked, e.g., with a burst of Deauthentication frames to hostapd
and STA entry deletion. Try to increase the buffer to make this less
likely to occur.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 13:51:15 +02:00
Luciano Coelho
7b7b4449a9 nl80211: Fix reading of the extended capabilities mask
We were copying the NL80211_ATTR_EXT_CAPA attribute into the
extended_capa_mask element, which is incorrect. Use
NL80211_ATTR_EXT_CAPA_MASK instead.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-01-20 01:57:59 +02:00
Janusz Dziedzic
95ff306988 nl80211: Allow HT/VHT to be disabled for IBSS
Allow HT/VHT overrides to be used for IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-19 02:35:43 +02:00
Masashi Honma
7451a217be mesh: Return negative value on join failed
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-01-19 02:35:43 +02:00
Masashi Honma
5a2a6de6a5 mesh: Make inactivity timer configurable
Current mesh code uses ap_max_inactivity as inactivity timer. This patch
makes it configurable.

There is another mesh inactivity timer in mac80211. The timer works even
if user_mpm=1. So this patch sets the max value to the timer for
workaround.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-01-19 02:35:43 +02:00
Masashi Honma
b9749bac81 AP: Expire STA without entry in kernel
If the inactivity check returns that there is no entry remaining for the
STA in the kernel, drop the STA in hostapd as well.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-01-19 02:35:43 +02:00
Jouni Malinen
1fef85c7c5 nl80211: Fix AP-scan-in-STA-mode error path behavior
If a second scan trigger attempt fails in STA mode, the error path was
supposed to restore the old mode that was in use before changing to STA
mode. However, wpa_driver_nl80211_set_mode() changes drv->nlmode on
success, so the recovery path needs to use the saved old_mode value
instead.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-15 00:59:14 +02:00
Jouni Malinen
21c74e8462 nl80211: Use a helper function to put mesh_id
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
85e1fad8a5 nl80211: Use a helper function for putting beacon interval
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
f7e889fa2d mesh: Convert channel configuration to use common routines
Use struct hostapd_freq_params just like other modes do instead of
mesh-specific freq and ht_mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
1fc4ab2367 nl80211: Move debug prints into nl80211_put_freq_params()
This way all callers can get the benefit of the same debug prints.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
cae87abd13 nl80211: Add a helper function for putting basic rates
There is no need for maintaining two more or less identical copies of
this functionality.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
1830817ece IBSS: Add WPA_DRIVER_FLAGS_HT_IBSS
Add WPA_DRIVER_FLAGS_HT_IBSS driver feature flag. Some drivers could not
set this feature and next could fail when we will enable HT support for
IBSS with error message: nl80211: Join IBSS failed: ret=-22 (Invalid
argument).

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Imre Vadasz
28c91ee124 bsd: Fix parsing of ieee80211req_scan_result on FreeBSD and DragonFly
On FreeBSD and DragonFly BSD, we additionally need to skip the
isr_meshid_len bytes of the MESH ID, to get the correct address for
copying the IE data.

The isr_meshid_len field was added in the FreeBSD svn revision r195618
in 2009, so I don't think we need to check the FreeBSD version here.

Signed-off-by: Imre Vadász <imre@vdsz.com>
2015-01-10 11:43:29 +02:00
Jouni Malinen
d58ade2121 nl80211: Fix compilation with libnl 1.1 and 2.0
Unfortunately, libnl 3.0 has changed the API in a way that is not
backwards compatible by renaming nlmsg_len() to nlmsg_datalen() without
leaving the older nlmsg_len() defined. As such, there does not seem to
be any clean way of using this function without breaking the build with
some libnl versions. For now, replace this call with direct calculation
of the data length since it can be done with a simple one-liner that
compiles with all libnl versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-06 18:30:20 +02:00
Jouni Malinen
dcf8fbc058 nl80211: Simplify event processing error paths
These are practically unreachable code since cfg80211 fills in the
required attributes or does not send the event. Keep the checks in
place, but minimize the extra code in wpa_supplicant/hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-05 13:40:07 +02:00
Jouni Malinen
38751d8bd5 nl80211: Remove cfg80211 state mismatch workaround for authentication
cfg80211 dropped support for tracking BSS authentication state and
setting NL80211_BSS_STATUS_AUTHENTICATED in 'cfg80211: stop tracking
authenticated state' three years ago (starting in Linux 3.4). As such,
this workaround code in wpa_supplicant cannot be reached anymore. There
is no real need for maintaining it for older kernels either, since there
are other ways of detecting and working around state mismatches with the
actual authentication operations failing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-05 12:21:12 +02:00
Jouni Malinen
64ae244763 nl80211: Check support for rekey offload on first use
While there is no explicit driver capability advertisement for this in
nl80211, the EOPNOTSUPP response can be interpreted as a clear
indication of NL80211_CMD_SET_REKEY_OFFLOAD not being supported. Check
for that and don't try to offload keys again if the driver has not use
for them.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-05 12:00:09 +02:00
Ilan Peer
86056fea63 nl80211: Handle MAC address randomization in scan/sched_scan
1. Process supported driver capabilities.
2. Populate scan request with MAC address randomization data

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-01-04 23:06:31 +02:00
Ilan Peer
ff23ed221d driver: Add definitions for MAC address randomization in scan
1. Add parameters to the scan command to allow MAC address
   randomization during scan and scheduled scan.
2. Add capability bits to publish MAC address randomization support
   in scan and scheduled scan.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-01-04 21:46:38 +02:00
Arik Nemtsov
72b2605f15 nl80211: Pass TDLS channel-switch start/stop params to kernel
The kernel-driver/firmware are responsible for performing periodic
switches to the target channel with the given peer. Propagate all TDLS
channel switching related information to kernel.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 21:46:37 +02:00
Arik Nemtsov
6b90deae4d TDLS: Propagate enable/disable channel-switch commands to driver
The supplicant code does not try to control the actual channel of the
radio at any point. It simply passes the target peer and channel
parameters to the driver. It's the driver's responsibility to
periodically initiate TDLS channel-switch operations when TDLS
channel-switching is enabled.

Allow enable/disable operations to be invoked via the control interface.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 20:30:11 +02:00
Arik Nemtsov
4daa572925 TDLS: Add channel-switch capability flag
Propagate a driver TDLS channel-switch support bit from nl80211 to
TDLS code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 18:59:31 +02:00
Jouni Malinen
ca16586afe Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-26.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-04 18:59:31 +02:00
Avraham Stern
730a0d16bf nl80211: Always register management frames handler
If registering WMM-AC ADDTS response action frame or WMM-AC DELTS
action frame fails, the management frame handler is not being
registered. This results with a segmentation fault when trying to
unsubscribe the handler when the interface is removed.
Fix it by always registering the handler and just returning a negative
value to note that the action frame could not be registered.

This fixes an issue introduced in the commit
dfa8787833 ('nl80211: Implement
add_ts/del_ts ops').

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-01-04 18:28:03 +02:00
Jouni Malinen
4e8f31e2ef doc: Extend driver.h documentation
This documents some more parts of the driver wrapper interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 18:24:20 +02:00
Jouni Malinen
bbd89bfca0 nl80211: Clear nlmsg payload with keys before freeing
This reduces the time possible keys could remain in heap memory. Couple
of the nl80211 messages include keys (TK for normal ciphers and
KCK/KEK/PMK for various offloading cases).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 01:15:34 +02:00
Jouni Malinen
f2535da879 nl80211: Note linux_set_iface_flags() failure in debug log
There was one final remaining linux_set_iface_flags() call that did not
check the result. This specific one does not really matter much, but
anyway, be more consistent by checking the result and log any error in
debug log. (CID 74146)

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:56:04 +02:00
Jouni Malinen
49e3eea8d9 Avoid -Wshadow warnings from older gcc versions
It looks like gcc 4.8.2 would warn about these with -Wshadow, but 4.6.3
did.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:21:00 +02:00
Jouni Malinen
a193231dfb Clean up debug prints to use wpa_printf()
This converts most of the remaining perror() and printf() calls from
hostapd and wpa_supplicant to use wpa_printf().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:20:57 +02:00
Jouni Malinen
36f0cf3774 privsep: Fix compilation due to associate() parameter updates
struct wpa_driver_associate_params moved to using struct
hostapd_freq_params instead of just frequency. Need to update wpa_priv
to do same.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
40e7639600 nl80211: Check if_indextoname() return value for bridge events
It would be at least theoretically possible for the bridge netdev to
have disappeared at the time hostapd processes the RTM newlink/dellink
message. As such, it is better to verify that if_indextoname() actually
returned success before printing the bridge ifname in debug. In
addition, there is not much point trying to add the bridge ifindex into
the list of own ifindexes in case the interface has already been
removed, so skip that part as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 19:43:24 +02:00
Jouni Malinen
ce20a3702c nl80211: Remove practically unused process_drv_event()
This was used in the past, but all the event processing is now either
through process_global_event() or process_bss_event().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 16:12:11 +02:00
Masashi Honma
4b4093686b mesh: Make maximum number of peer links configurable
Maximum number of peer links is maximum number of connecting mesh peers
at the same time. This value is 0..255 based on the
dot11MeshNumberOfPeerings range.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:52:31 +02:00
Masashi Honma
9c58c5f72c mesh: Make beacon interval configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:38:20 +02:00
Jouni Malinen
5ef8e39fa7 nl80211: Fix interface-in-different-bridge case
The local ifindex list needs to be updated only if the current bridge
interface is the correct one. If hostapd is going to move the interface
to another bridge, the old bridge ifindex must not be added. In
addition, when removing the bridge interface on deinit, it may need to
be set down to allow bridge removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:00:08 +02:00
Jouni Malinen
666e508ccf nl80211: Fix cfg80211 workaround for IBSS join
The interface was incorrectly changed to station mode between the two
IBSS join requests and that made the second attempt fail. Remove that
undesired mode clearing from this special case of IBSS leave sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:35:23 +02:00
Jouni Malinen
533fe09b78 nl80211: Fix no-encrypt for IEEE 802.1X WEP EAPOL
Commit 9f12614b8c ('nl80211: Do not
encrypt IEEE 802.1X WEP EAPOL') tried to use
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT to disable encryption of EAPOL
frames for WEP IEEE 802.1X. However, it used incorrect key management
suite (IEEE 802.1X with WPA/WPA2 while the non-WPA version is needed
here). Consequently, the no-encrypt flag was never set to the driver
(WPA/WPA2 cases do not meet the WEP as pairwise criteria).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:35:03 +02:00
Jouni Malinen
1033315fbe nl80211: Remove send_and_recv_msgs_global() wrapper
There was only a single user for this and calling send_and_recv()
directly is as simple as using this wrapper.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:45:28 +02:00
Jouni Malinen
bdf5ccb264 nl80211: Remove unnecessary function declarations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:37:16 +02:00
Masashi Honma
5b78493f3b mesh: Add mesh interface creation command for mesh gate
The mesh gate is used to bridge (or route) between mesh network and
another network. For example, mesh gate acts as router between mesh
network and IEEE 802.11 BSS network.

This command makes a virtual mesh interface to be used for mesh gate.

This command expects to be used like this.

wpa_cli -i wlan0 MESH_INTERFACE_ADD ifname=mesh0
wpa_cli -i mesh0 add_network
wpa_cli -i mesh0 set_network 0 ssid '"commell_2X_mmm"'
wpa_cli -i mesh0 set_network 0 mode 5
wpa_cli -i mesh0 set_network 0 frequency 2412
wpa_cli -i mesh0 set_network 0 key_mgmt SAE
wpa_cli -i mesh0 set_network 0 psk '"01234567"'
wpa_cli -i mesh0 mesh_group_add 0
wpa_cli -i wlan0 mesh_group_remove mesh0

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-14 23:27:43 +02:00
Jörg Krause
33c7eb810a wext: Fix musl build error
Building wpa_supplicant with the musl C library fails since musl does
not define type names such as '__uint32_t'. To support building
wpa_supplicant with the musl C library use the integer types declared in
the ISO C standard header file <stdint.h>.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
2014-12-14 18:05:32 +02:00
Rafał Miłecki
7c4027f604 nl80211: Report new station / assoc event for the correct BSS
drv->ctx always points to the first BSS and we should report event using
BSS related to the interface we got NL80211_CMD_NEW_STATION from.
This fixes STA association for drivers using NL80211_CMD_NEW_STATION and
multiple virtual interfaces.

Before:
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0-1 (ifindex:7)
nl80211: New station 02:00:00:00:01:00
wlan0: STA 02:00:00:00:01:00 IEEE 802.11: associated

After:
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0-1 (ifindex:7)
nl80211: New station 02:00:00:00:01:00
wlan0-1: STA 02:00:00:00:01:00 IEEE 802.11: associated

This is not applicable to the cases where authentication (AP SME & MLME)
is in hostapd and hostapd_assoc_cb() instead of hostapd_notif_assoc()
handles BSS selection.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2014-12-14 17:29:26 +02:00
Jouni Malinen
a0a34d536e nl80211: Add rrm_flags to STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 21:09:11 +02:00
Jouni Malinen
2961bfa8e1 Remove unused send_eapol() driver op
The send_eapol() callback was used by driver_test.c, but with that
removed, there is no remaining users of the alternative EAPOL frame
transmitting mechanism in wpa_supplicant, i.e., all remaining driver
interfaces use l2_packet instead. Remove the send_eapol() to get rid of
unused code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:40:07 +02:00
Chet Lanctot
15badebd47 nl80211: Add QCA vendor specific query of device/driver features
This commit introduces a QCA vendor command that allows interrogation of
the vendor-specific features supported by the device/driver. Currently
the only defined feature is the ability to offload key management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 21:08:21 +02:00
Jouni Malinen
1f90dfd2cd nl80211: Add frame control and sequence control field in RX frame debug
This makes it easier to debug issues related to duplicated management
frames on receive path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-09 01:19:20 +02:00
Jouni Malinen
4bd7195466 nl80211: Try to unmask 11b rates again on next connection request
It is possible for unmasking of 11b rates to fail if a P2P group is
terminated while the netdev is down (e.g., due to rfkill block). This
could result in the 11b TX rates being left masked for non-P2P
operations. This would be particularly unfortunate for channel 14 use
since OFDM rates are not allowed on channel 14 and only OFDM rates were
configured P2P. This issue showed up, e.g., when running hwsim test case
rfkill_autogo followed by ap_wps_conf_chan14.

It may be possible to allow the failed operation in cfg80211/mac80211,
but it looks better to work around this on wpa_supplicant side as well.
Try to unmask the 11b rates again on the next connection request if the
rate unmasking operation had failed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-08 16:10:46 +02:00
Jouni Malinen
3e208481b5 nl80211: Add more debug prints for 11b rate disabling and re-enabling
This makes it easier to debug issues related to TX rate masking for P2P
use cases (and unmasking for non-P2P).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-08 16:01:51 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a80ba67a26 Check os_snprintf() result more consistently - success case
This converts os_snprintf() result validation cases to use
os_snprintf_error() in cases where success condition was used to execute
a step. These changes were done automatically with spatch using the
following semantic patch:

@@
expression E1,E2,E3;
statement S1;
@@

  E1 = os_snprintf(E2, E3, ...);
- if (\( E1 >= 0 \| E1 > 0 \) && \( (size_t) E1 < E3 \| E1 < (int) E3 \| E1 < E3 \))
+ if (!os_snprintf_error(E3, E1))
  S1

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a9aaacbb50 Check os_snprintf() result more consistently - maximum length
This adds verification of os_snprintf() result against the maximum
buffer length. These changes were done automatically with spatch
using the following semantic patch:

@@
expression E1,E2,E3;
statement S1;
@@

  E1 = os_snprintf(E2, E3, ...);
- if (\( E1 < 0 \| E1 <= 0 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
8105821b39 Replace send_ft_action() driver_op with send_action()
This reduced number of unnecessarily duplicated driver interface
callback functions for sending Action frames by using the more generic
send_action() instead of FT specific send_ft_action().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 18:13:29 +02:00
Jouni Malinen
477af8f869 nl80211: Move scanning related functionality to a separate file
This helps in making the still overly large driver_nl80211.c somewhat
more manageable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:59:26 +02:00
Jouni Malinen
3f63614f18 nl80211: Clean up nl80211_scan_common() to use nl80211_cmd_msg()
This helper function had not used the nl80211_set_iface_id() helper, but
there is no reason why it couldn't re-use the same helper as other
places using nl80211_cmd_msg().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:51 +02:00
Jouni Malinen
95376e1a99 nl80211: Use nl80211_iface_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:51 +02:00
Jouni Malinen
13f83980f0 nl80211: Use nl80211_bss_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and either bss->ifindex or if_nametoindex(bss->ifname).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:46 +02:00
Jouni Malinen
a3249fdfb8 nl80211: Use nl80211_cmd_msg() for P2P Device operations
bss->wdev_id_set is set for the non-detdev P2P Device, so
nl80211_cmd_msg() can be used as-is for these cases as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:19 +02:00
Jouni Malinen
9725b78421 nl80211: Use nl80211_drv_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and drv->ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:12 +02:00
Jouni Malinen
350acc354d nl80211: Move nl80211_set_iface_id() next its only remaining user
This function was in a bit strange location between struct family_data
and family_handler() definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:26 +02:00
Jouni Malinen
56f77852e5 nl80211: Use the new nl80211_cmd_msg() helper
This removes duplicated code for building nl80211 commands for a BSS.
This commit handles the functions that were already using
nl80211_set_iface_id().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:25 +02:00
Jouni Malinen
07c7757cb1 nl80211: Add nl80211_*_msg() helpers
These new functions can be used to both allocate and build a header for
most nl80211 commands.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:01 +02:00
Jouni Malinen
a862e4a38f nl80211: Continue getting rid of NLA_PUT* macro use
This gets rid of more NLA_PUT* macro uses in nl80211 to reduce the
number of functions that depend on the hidden behavior of jumping to the
nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:50:15 +02:00
Jouni Malinen
9589a91e0e nl80211: Get rid of NLA_PUT* macro use in capability checking
This gets rid of NLA_PUT* macro use in checking nl80211 capabilities to
reduce the number of functions that depend on the hidden behavior of
jumping to the nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:18:38 +02:00
Jithu Jance
0d4e3d1d13 nl80211: Ignore Connect failure for the previous association
Suppose there are two APs (AP1 & AP2) and user attempted to connect to
AP2 before the previous connection with AP1 could succeed. Now, if the
connection event comes for the older AP with failed status, we should
just ignore it as the wpa_supplicant state has moved to "ASSOCIATING"
with the new AP (AP2).

This is a similar to the case where a disconnection event is ignored for
a case where local disconnect request can cause the extra event to show
up during the next association process following that command.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-12-04 00:34:08 +02:00
Peng Xu
16689c7cfc hostapd: Allow ACS to be offloaded to the driver
Using QCA vendor command, allow ACS function to be offloaded to the
driver. Once channels are selected, hostapd is notified to perform OBSS
operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-03 22:31:53 +02:00
Vivek Natarajan
b685e2aab7 atheros: Cleanup atheros_raw_receive to process all management frames
Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com>
2014-12-02 16:20:35 +02:00
Jouni Malinen
0ecff8d7c3 Add hostapd driver_params config parameter
This is mainly for development testing purposes to allow driver_nl80211
behavior to be modified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 13:24:42 +02:00
Jouni Malinen
ebd557288c Remove forgotten driver_test.c variables
hostapd was still providing couple of parameters that were used only in
the already removed driver_test.c framework.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 12:49:55 +02:00
Jouni Malinen
bd26031b4b wext: Fix non-WPA/WPA2 connection with extra IEs
The associate() handler was not prepared for params->wpa_ie containing
some other IEs than WPA/RSN IE and ended up configuring security policy
incorrectly for open networks if such IEs were present. Fix this by
using wpa_proto parameter instead of IEs to determine security policy
for driver configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Johannes Berg
d306df7919 wext: Add very basic status command support
Just to make the test framework happy, it uses the driver
status command to obtain the interface MAC address.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
f33c82d23e nl80211: Change iftype to station on leaving mesh
This is needed to make following operations behave as expected since
mesh iftypes may prevent various operations (e.g., registering Probe
Request frame RX). Use same design as leave_ibss does to handle this
consistently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 17:12:47 +02:00
Jouni Malinen
7a94120ea9 nl80211: Clear ignore_if_down_event if interface is up
It was possible for the ignore_if_down_event flag to remain set in some
cases where interface mode change required the interface to be set down
temporarily. If that happened, the following rfkill interface down could
have been ignored and device could have been left trying to scan or
connect (which would all fail due to the interface beign down). Clean
this up by clearing the ignore_if_down_event flag on the interface down
event regardless of whether the interface is up at the time this event
is processed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:59:28 +02:00
Jouni Malinen
8997613c90 nl80211: Fix br_ifindex storing when hostapd creates the bridge
Commit 6c6678e7a4 ('nl80211: Make
br_ifindex available in i802_bss') did not cover the case where
i802_check_bridge() ends up creating the bridge interface. That left
bss->br_ifindex zero and prevented neighbor addition. Extend that
functionality to update br_ifindex once the bridge netdev has been
added.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-26 01:16:35 +02:00
Andrei Otcheretianski
7dc0338806 nl80211: Register Link Measurement Request Action frame
Add link measurement request to registration of Action frames to be
handled by wpa_supplicant if the driver supports TX power value
insertation.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-22 21:38:30 +02:00
Assaf Krauss
2526ccd95a nl80211: Register Neighbor Report Response Action frame
Add Neighbor Report Response Action frame to registration of Action
frames to be handled by wpa_supplicant.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:16:25 +02:00
Assaf Krauss
58162adf06 nl80211: Populate RRM flags in nl80211 driver
Set the RRM capability flags, based on the capabilities reported
by the underlying driver.

In addition, upon connection, notify the underlying driver regarding
RRM support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:06:32 +02:00
Assaf Krauss
0dc957b93d driver: Add RRM-related definitions to driver interface
Add definitions for RRM (Radio Resource Measurement) support:
1. Flags that specify the RRM capabilities of the underlying driver
2. Flag for RRM in Capability Info field in Management frames
3. Indication in association parameters regarding an RRM connection

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:05:55 +02:00
Jouni Malinen
e503861f4d nl80211: Do not try to change STA capability on NL80211_CMD_SET_STATION
cfg80211 will reject any of these attributes regardless of whether the
values actually change or not when NL80211_CMD_SET_STATION is used for
something else than TDLS. This path is hit at least when setting up
mesh, so filter out the attributes from NL80211_CMD_SET_STATION to match
the rules in cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-20 16:31:05 +02:00
Kyeyoon Park
ed4ddb6d77 AP: Extend the BSS bridge neighbor entry management to support IPv6
This allows adding/deleting an IPv6 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:23:38 +02:00
Jouni Malinen
01b24c52df wired: Fix deinit path to unregister eloop read_sock
The previous version was leaving behind registered eloop socket
instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 00:57:15 +02:00
Moshe Benji
dfa8787833 nl80211: Implement add_ts/del_ts ops
Add ops to notify about TSPECs to add/remove. Additionally, subscribe to
ADDTS/DELTS Action frames to be able to process WMM AC Action frames.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:21:22 +02:00
Moshe Benji
471cd6e10c WMM AC: Add add_tx_ts and del_tx_ts driver ops
Add add_tx_ts() and del_tx_ts() ops to notify the driver about
TSPEC add / delete.

Additionally, add wmm_ac_supported flag to indicate
whether the driver supports WMM AC.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 20:47:36 +02:00
Eliad Peller
7e0e10693a nl80211: Parse WMM parameters on association
Set the relevant WMM parameters in the assoc_data event.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:19:04 +02:00
Eliad Peller
0f14a44e6b drivers: Add WMM parameters to association event data
The WMM parameters will be used later for setting default tspec values.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:16:58 +02:00
Jouni Malinen
d308d1a899 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-11.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 20:08:00 +02:00
Jason Mobarak
5cfb672dde mesh: Enable mesh HT mode
Add a new option "mesh_ht_mode" that specifies the HT mode for the
mesh, with this option on, mesh beacons, actions frames, and probe
responses with include the appropriate HT information elements.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-16 19:43:11 +02:00
Dmitry Shmidt
88cb27c7a5 hostapd: Add wowlan_triggers config param
New kernels in wiphy_suspend() will call cfg80211_leave_all() that will
eventually end up in cfg80211_stop_ap() unless wowlan_triggers were set.
For now, use the parameters from the station mode as-is. It may be
desirable to extend (or constraint) this in the future for specific AP
mode needs.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-11-16 17:09:11 +02:00
Ilan Peer
f03996565a nl80211: Fix Android compilation by adding include for fcntl.h
This is needed for fcntl() at least with Android KK.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-16 17:09:11 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Jouni Malinen
68ee1cdca0 Remove unused EVENT_MLME_RX
This was used in driver_test.c, but that driver wrapper has been removed
and there are no remaining or expected users for EVENT_MLME_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:31:23 +02:00
Jouni Malinen
0f812c993b Remove unused EVENT_FT_RRB_RX
This was used in hostapd driver_test.c, but that driver wrapper has been
removed and there are no remaining or expected users for
EVENT_FT_RRB_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:27:48 +02:00
Jouni Malinen
f21495ad38 madwifi: Remove obsolete madwifi driver interface
The MadWifi project is not active anymore and the last release happened
in early 2008. As such, there is no remaining justification for
maintaining the madwifi-specific driver interface for hostapd either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 16:15:29 +02:00
Jouni Malinen
10bbe8b8ed nl80211: Fix a copy-paste error in key offload management
Commit b41f26845a ('Add support for
offloading key management operations to the driver') used incorrect
variable for determining the KCK length. This does not get triggered in
normal use cases since KCK and KEK are always included and of the same
length (in currently supported key management cases). Anyway, this needs
to be fixed to check the correct attribute. (CID 74491)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 01:41:57 +02:00
Kyeyoon Park
7565752d47 AP: Add support for setting bridge network parameter
This allows setting a network parameter on the bridge that the BSS
belongs to.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
73d2294fbe AP: Add support for setting bridge port attributes
This allows setting a bridge port attribute. Specifically, the bridge
port in this context is the port to which the BSS belongs.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
71103bed42 AP: Add support for IPv4 neighbor entry management to the BSS bridge
This allows adding/deleting an IPv4 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
6c6678e7a4 nl80211: Make br_ifindex available in i802_bss
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Jouni Malinen
159a17916f nl80211: Move more event processing into driver_nl80211_event.c
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
8a906d1251 nl80211: Move event handling into a separate file
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
0fafeb5454 nl80211: Move capability determination into a separate file
This moves significant amount of code away from large driver_nl80211.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
906bc4c7d3 nl80211: Move QCA DFS offload capability determination to init time
There is no need to fetch this capability for each get_capa() call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
981cf85a41 nl80211: Move AP monitor interface handling to a separate file
This moves the old monitor interface design to driver_nl80211_monitor.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
f3407c66c2 nl80211: Make some helper functions non-static
This allows more functionality to be moved to separate files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
70a96c8116 nl80211: Move most of the Android code into a separate file
This moves most of the Android specific implementation from
driver_nl80211.c to driver_nl80211_android.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
1474e6e917 nl80211: Move definitions into separate header files
This is an initial step in starting to split the large driver_nl80211.c
implementation into somewhat smaller parts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:03:24 +02:00
Jouni Malinen
392dfd37e8 nl80211: Store externally managed bridge name in driver status
This makes it easier to figure out from hostapd control interface
whether an interface had been added to a bridge externally at the time
hostapd interface was enabled or if the interface gets added during
hostapd operations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 11:27:31 +02:00
Ilan Peer
9bc5cfa338 nl80211: Clear beacon_set when deleting a beacon from deinit_ap()
When a beacon was deleted from the kernel in
wpa_driver_nl80211_deinit_ap(), bss->beacon_set was not cleared so
restarting the AP again was not possible.

Fix this by clearing the variable once the beacon was deleted.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:24:03 +03:00
Ilan Peer
ea6bf29ea3 nl80211: Add indoor only and GO concurrent flags
Add the following channel flags:

* INDOOR_ONLY: The channel can be used if and only if there is a clear
  assessment that the device is operating in an indoor environment, i.e.,
  it is AC power.

* CONCURRENT_GO: The channel can be used for instantiating a GO if and
  only if there is an additional station interface that is currently
  connected to an AP on the same channel or on the same U-NII band
  (assuming that the AP is an authorized master).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:23:46 +03:00
Ilan Peer
0a44358055 wpa_supplicant: Use the 'no_ir' notation
Use the 'no_ir' notation instead of the 'passive scan' and
'no_ibss' notations to match the earlier change in nl80211.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:23:43 +03:00
Thomas Pedersen
476e6bb68d mesh: Add mesh mode config option
Modify network mode to support mode number 5 when CONFIG_MESH is
enabled.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-10-25 17:45:35 +03:00
Bob Copeland
5551bc9cb2 nl80211: Do not try to change supported rates
For mesh mode to work properly, set supported rates only once.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:57 +03:00
Bob Copeland
7a228b5c3f nl80211: Add STA flag WPA_STA_AUTHENTICATED
This is needed for managing STA entries for mesh use cases.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:47 +03:00
Bob Copeland
7c7e7877fc nl80211: Add plink_action_field to hostapd_sta_add_params
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:38 +03:00
Bob Copeland
0d391b03e7 nl80211: Reject deauth/disassoc for mesh interface
sta_info call these to send out the disassoc and deauth frame
which are both not relevent to mesh. So don't send them.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 13:47:48 +03:00
Bob Copeland
afb0550a39 nl80211: Register to receive mesh frames
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 13:47:12 +03:00
Jouni Malinen
aed8d4d1ff nl80211: Write channel type in debug log on channel switch event
This makes it easier to understand what kind of channel switch was
indicated by the driver.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 11:28:56 +03:00
Eliad Peller
da1080d721 nl80211: Advertise and configure SMPS modes
Advertise static/dynamic SMPS mode support (according to the wiphy
feature bits) and pass the configured smps_mode when starting the AP.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:29:08 +03:00
Eliad Peller
8f461b50cf HT: Pass the smps_mode in AP parameters
The driver needs to know what SMPS mode it should use.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:27:31 +03:00
Eliad Peller
04ee647d58 HT: Let the driver advertise its supported SMPS modes for AP mode
Add smps_modes field, and let the driver fill it with its supported SMPS
modes (static/dynamic). This will let us start an AP with specific SMPS
mode (e.g., dynamic) that will allow it to reduce its power usage.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:25:29 +03:00
Chet Lanctot
b41f26845a Add support for offloading key management operations to the driver
This commit introduces a QCA vendor command and event to provide an
option to use extended versions of the nl80211 connect/roam operations
in a way that allows drivers to offload key management operations to the
driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 18:38:50 +03:00
Johannes Berg
97752f7930 Revert "nl80211: Do not indicate P2P_DEVICE support by default"
This reverts commit 851b0c5581.

The kernel now has full support for this (and it is turned off
by default for hwsim) so wpa_supplicant should really go back
to autodetecting this so clients don't have to figure out what
to do.

Also add a debug message stating that P2P_DEVICE support is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:54:02 +03:00
Bob Copeland
a52024c976 nl80211: Add new peer candidate event for mesh
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
7e31703e4d nl80211: Add support for sta_add flags_mask
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
6c1664f605 nl80211: Add new commands to support mesh interfaces
Create init_mesh, mesh_join, and mesh_leave actions to kernel.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
24bd4e0be5 nl80211: Add driver flag to indicate mesh support
Convert the driver flags variable to u64 since there was no room for
more flags.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Jouni Malinen
54a800dd51 netlink: Fix RTM_SETLINK padding at the end of the message
While the kernel seems to have accepted the message to set linkmode and
operstate without the final attribute getting padded to 32-bit length,
it is better to get this cleaned up to match expected format. The double
NLMSG_ALIGN() followed by RTA_LENGTH() did not make much sense here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 19:27:16 +03:00
Jouni Malinen
3eafc494d8 Fix CONFIG_NO_SCAN_PROCESSING=y build
ht_supported() was used but not defined in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:02:23 +03:00
Jouni Malinen
93da049851 nl80211: Be more consistent with linux_set_iface_flags() result
Check the return value and write a debug message if this operation
failes (CID 74146).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:43:30 +03:00
Jouni Malinen
01b3bbfc66 test: Remove driver_test.c
The driver_test.c driver wrapper (-Dtest in wpa_supplicant and
driver=test in hostapd) was previously used for testing without real
Wi-Fi hardware. mac80211_hwsim-based tests have practically replaced all
these needs and there has been no improvements or use for driver_test.c
in a long while. Because of this, there has not really been any effort
to maintain this older test tool and no justification to change this
either. Remove the obsoleted test mechanism to clean up the repository.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 17:46:04 +03:00
Jouni Malinen
59d7148ad7 nl80211: Provide subtype and reason code for AP SME drivers
This allows drivers that implement AP SME internally to generate a
Deauthentication or Disassociation frame with the specified reason code.
This was already done with drivers that use hostapd/wpa_supplicant for
AP SME.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 20:05:37 +03:00
Janusz Dziedzic
4ec68377ef wpa_supplicant: Use hostapd_freq_params in assoc_params
Use hostapd_freq_params instead of simple frequency parameter for driver
commands. This is preparation for IBSS configuration to allow use of
HT/VHT in IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-10-04 18:43:42 +03:00
Dan Williams
3e0272ca00 nl80211: Re-read MAC address on RTM_NEWLINK
Commit 97279d8d (after hostap-2.0) dropped frame events from foreign
addresses. Unfortunately this commit did not handle the case where the
interface's MAC address might be changed externally, which other
wpa_supplicant code already handled. This causes the driver to reject
any MLME event because the address from the event doesn't match the
stale address in the driver data.

Changing an interface's MAC address requires that the interface be
down, the change made, and then the interface brought back up. This
triggers an RTM_NEWLINK event which driver_nl80211.c can use to
re-read the MAC address of the interface.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-10-04 16:41:20 +03:00
Jouni Malinen
5dfbd725a9 nl80211: Add get_bss_ifindex() helper
This can be used to fetch a BSS entry based on interface index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:21:03 +03:00
Arik Nemtsov
984dadc23a TDLS: Set the initiator during tdls_mgmt operations
Some drivers need to know the initiator of a TDLS connection in order
to generate a correct TDLS mgmt packet. It is used to determine
the link identifier IE. Pass this information to the driver.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2014-10-03 11:52:21 +03:00
Jouni Malinen
01cb5df20c Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-10-02.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:39:27 +03:00
Ilan Peer
ca3c6b4da7 nl80211: Fix compatibility with older version of libnl
Commit 97ed9a06df ('nl80211: Remove bridge
FDB entry upon sta_remove()') used nl_sock and nl_socket_* functions
which are not compatible with older versions of libnl. Fix this.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-03 11:34:51 +03:00
Kyeyoon Park
97ed9a06df nl80211: Remove bridge FDB entry upon sta_remove()
The FDB entry removal ensures that the traffic destined for a
disassociated station's MAC address is no longer forwarded from the
bridge to the BSS.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-09-29 13:10:13 +03:00
Janusz Dziedzic
dbdc9a1d48 nl80211: Fix memory leak on start radar detection error path
Free nlmsg if failing to start radar detection.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-09-28 11:03:48 +03:00
Janusz Dziedzic
ed8e005973 hostap: nl80211 use nl80211_put_freq_params
Use nl80211_put_freq_params when it possible. Remove
duplicated code.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-09-27 21:47:40 +03:00
Jouni Malinen
fee354c74d nl80211: Add command for changing local MAC address
This can be used to allow wpa_supplicant to control local MAC address
for connections.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 19:11:24 +03:00
Jouni Malinen
b497a21267 nl80211: Ignore auth/assoc events when testing driver-SME
Previously, extra connect/roam events were ignored when user space SME
was used to avoid confusing double events for association. However,
there was no matching code for ignoring auth/assoc events when using
driver SME. Such events would not normally show up since the driver SME
case would not generated them. However, when testing forced connect
command with force_connect_cmd=1 driver param, these events are
indicated.

Ignore the extra events in testing cases to make the hwsim test cases
match more closely the real code path for driver SME. In addition, this
resolves some test case failures where double association event could
end up causing a failure, e.g., when doing PMKSA caching in
pmksa_cache_oppurtunistic_connect.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Dan Williams
7a4a93b959 dbus: Add SignalPoll() method to report current signal properties
Analogous to the control interface's SIGNAL_POLL request.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-13 17:21:54 +03:00
Jouni Malinen
0800f9ee6c nl80211: Add roaming policy update using QCA vendor command
This allows updating roaming policy for drivers that select the BSS
internally so that wpa_supplicant (based on bssid parameter
configuration) and the driver remain in sync.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
0ef023e478 Add support for driver command to update roaming policy
The network block bssid parameter can be used to force a specific BSS to
be used for a connection. It is also possible to modify this parameter
during an association. Previously, that did not result in any
notification to the driver which was somewhat problematic with drivers
that take care of BSS selection. Add a new mechanism to allow
wpa_supplicant to provide a driver update if the bssid parameter change
for the current connection modifies roaming policy (roaming
allowed/disallowed within ESS).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
0cd9846c63 nl80211: Print debug info on STA flag changes
This makes it easier to follow how kernel STA flags are managed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 11:25:04 +03:00
Eduardo Abinader
3ee18569f5 nl80211: Register eloop after hs20 action frame
Even when hs20 action frame is unable to be registered,
for whatever reason, it should be possible to register
event handle for received driver messages. This patch also
avoids a segmentation fault, when p2p and hs20 were enabled
and GO NEG was unable to create p2p iface, the destroy eloop
was crashing by reading an invalid handle.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-09-07 19:22:49 +03:00
Jouni Malinen
f2e9083549 nl80211: Add more RTM_NEWLINK/DELLINK debug messages
This makes it easier to figure out what operations are generating each
RTM_DELLINK message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:18:01 +03:00
Jouni Malinen
728ff2f469 nl80211: Fix RTM_DELLINK processing for bridge events
When a netdev is removed from a bridge, RTM_DELLINK message is received
with ifname (IFLA_IFNAME) pointing to the main netdev event though that
netdev is not deleted. This was causing issues with P2P GO interface
getting disabled when the netdev was removed from a bridge. Fix this by
filtering RTM_DELLINK events that are related to the bridge when
indicating interface status changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:14:07 +03:00
Avinash Patil
b8d87ed296 nl80211: Disable Probe Request reporting for static AP during deinit
Disable Probe Request reporting for statically created AP interfaces
during de-initialization. We will enable it again while starting AP
operations.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:22:30 +03:00
Avinash Patil
bf144cf649 nl80211: Do not change iftype for static AP interface
Some devices have limitations which do not allow changing virtual
interface mode from AP to station or vice versa. To work around this,
check if such AP interface is not dynamic. If such an interface is
enumarated, just set ifmode to AP and avoid setting nlmode to default
station mode on deinit.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:19:11 +03:00
Jean-Marie Lemetayer
61157afb1c wext: Add signal_poll callback
Add a basic implementation of a signal_poll callback for wext drivers.

Signed-off-by: Jean-Marie Lemetayer <jeanmarie.lemetayer@gmail.com>
2014-08-10 11:07:05 +03:00
Cedric IZOARD
6d00ab0430 nl80211: Ensure nl_preq unregistration on driver deinit
When driver interface is destroyed (via wpa_driver_nl80211_deinit) the
"preq" nl socket isn't always deleted but the callback struct associated
is. After the interface is destroyed we may still get event on the
socket but as the callback has been freed this will cause wpa_supplicant
to crash.

This patch ensures that the "preq" socket is destroyed when destroying
the interface.

Signed-off-by: Cedric IZOARD <cedricx.izoard@intel.com>
2014-07-08 16:01:43 +03:00
Michal Kazior
5841958f26 hostapd: Use channel switch fallback on error
It's worth giving a try to fallback to re-starting BSSes at least once
hoping it works out instead of just leaving BSSes disabled.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:13:11 +03:00
Michal Kazior
6782b6846b hostapd: Move CSA parameters to hostapd_data
This prepares CSA structure and logic in hostapd for multi-BSS channel
switching.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:02:39 +03:00
Christopher Wiley
3c5d34e30b Change channel before IBSS associations
Fix a bug where changing the mode of the interface to IBSS
fails because the interface is sitting on a channel where IBSS is
disallowed because of a previous association.

Signed-off-by: Christopher Wiley <wiley@chromium.org>
2014-06-28 10:46:33 +03:00
Christopher Wiley
ebffdbc493 nl80211: Refactor mode switch logic
In preparation for another wrinkle around switching into IBSS mode,
refactor existing mode switch logic for simplicity at the expense
of some brevity.

Signed-off-by: Christopher Wiley <wiley@chromium.org>
2014-06-28 10:42:05 +03:00
Pontus Fuchs
f95a4524c2 nl80211: Improve debug output by printing SA and DA in frames
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:54:06 +03:00
Pontus Fuchs
dedfa440ed Print frame type name in debug output
"stype=4" becomes "stype=4 (WLAN_FC_STYPE_PROBE_REQ)" etc.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:51:39 +03:00
Johannes Berg
57a8f8af38 nl80211: Use low-priority scan for OBSS scan
Some drivers may support low-priority scans, if they do then
use that for OBSS scanning.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-22 00:47:06 +03:00
Jithu Jance
d1bb7aeda4 nl80211: Fix non-hostapd interface addition to not call add_ifidx()
Commit b36935be1a ('nl80211: Fix EAPOL
frames not being delivered') and commit
147848ec4d ('nl80211: Do not add all
virtual interfaces to drv->if_indices') were not fully in sync and it
was possible for some non-hostapd use cases to end up adding undesired
ifindexes into the list of interfaces from which events and EAPOL frames
are processed on the parent interface. This could result, e.g., in P2P
Device management interface on getting unexpected events, including
RTM_NEWLINK event that could end up getting interpreted as an
indication of the interface being down and unavailable.

Make both add_ifidx() calls use the same criteria for adding interfaces
to the local list. This is not really a complete solution, but it is
good enough for now to fix the most visible side effects of this issue.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-06-17 01:35:07 +03:00
Jouni Malinen
ac79fcfa76 wext: Verify set_ssid results consistently (CID 62842)
Note in debug log if SSID clearing to stop pending cfg80211 association
attempts fail.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 12:32:53 +03:00
Ashok Kumar Ponnaiah
3dacd3ece7 atheros: Add support for new GCMP/CCMP/CMAC/GMAC cipher suites
Extend the set of supported cipher suites to include CCMP-256, GCMP,
GCMP-256, CMAC-256, GMAC, and GMAC-256 when ATH_GCM_SUPPORT=y is set in
the build configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-09 19:21:48 +03:00
Jithu Jance
d3d048310c nl80211: Work around error case prints for nl_recvmsgs on Android
I got the below prints on a particular Android platform:

I/wpa_supplicant( 2637): nl80211: send_and_recv->nl_recvmsgs failed: 20
I/wpa_supplicant( 2637): nl80211: send_and_recv->nl_recvmsgs failed: 20

In JellyBean libnl_2 code, I see that the nl_recvmsgs returns postive values
too. In some cases, nl_recvmgs return the output of nl_recv function. nl_recv
function can return Number of bytes read, 0 or a negative error code.

Looks like this positive return value for nl_recvmsgs may be specific to
Android. While this is not how the API is supposed to work, this does no
harm with upstream libnl which returns only 0 or -1 from the function.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-06-01 11:25:02 +03:00
Michal Kazior
ea39367c1b nl80211: Fix wpa_driver_nl80211_if_add() failure paths
Make sure to not remove interfaces that were not created by
hostapd/wpa_supplicant. This was already done on number of the error
paths, but not all.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-05-31 13:43:27 +03:00
Jouni Malinen
147848ec4d nl80211: Do not add all virtual interfaces to drv->if_indices
Commit 04eff7d5ba or something around that
timeframe may have caused a regression on how drv->if_indices gets used
with wpa_supplicant. Most (curretly likely all) wpa_supplicant virtual
interface use cases should not actually use this. This could result in
issues with P2P group interfaces delivering events to incorrect
interface (parent rather than the group interface). The previous commit
removed some of the issues, but more complete fix is to undo some of
those merged hostapd/wpa_supplicant operations.

Filter add_ifidx() uses based on hostapd vs. wpa_supplicant and iftype
to get closer to the earlier wpa_supplicant behavior for the driver
events from virtual interfaces.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 18:47:41 +03:00
Jouni Malinen
de88430311 nl80211: Fix del_ifidx() with mixed parent interface cases
It is possible for a virtual interface to be added and removed by
different parent interfaces. This can happen, e.g., with P2P group
interfaces if the P2P parent interface does not happen to be the first
entry in the wpa_supplicant global interface list. That first entry is
used to remove the group interface while the addition would have
happened with the dedicated P2P management interface.

This can result in the interface that added a new virtual interface
getting stuck with an obsolete ifindex value in the drv->if_indeces list
and as such, deliver some extra events to incorrect destination wpa_s
instance. In particular, this can result in INTERFACE_DISABLED event
from deletion of a P2P group interface getting delivered incorrectly to
the parent wpa_s instance which would disable that interface even though
the interface remains in enabled state.

Fix this by clearing the removed interface from all if_indeces lists
instead of just the one that was used to delete the interface. This is
the simplest approach since the ifindex is unique and there is no need
to track which interface added the new virtual interface to always hit
the same one when removing the interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 18:16:58 +03:00
Jithu Jance
8802326ff9 nl80211: Indicate SHA256-based AKM suites in CONNECT/ASSOCIATE
Previously, the NL80211_ATTR_AKM_SUITES was skipped if either of these
SHA256-based AKMs was negotiated.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-05-21 23:48:00 +03:00
Jouni Malinen
c7caac56b7 nl80211: Fix send_frame freq for IBSS
bss->freq was not updated for IBSS, so whatever old value was stored
from a previous AP mode operation could end up having been used as the
channel when trying to send Authentication frames in an RSN IBSS. This
resulted in the frame not sent (cfg80211 rejects it) and potentially not
being able to re-establish connection due to 4-way handshake failing
with replay counter mismatches. Fix this by learning the operating
channel of the IBSS both when join event is received and when a
management frame is being transmitted since the IBSS may have changed
channels due to merges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Hu Wang
8d0dd4eebc Add macsec_qca driver wrapper
This is based on driver_wired.c and provides driver interface for the
QCA MACsec driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:42:44 +03:00
Hu Wang
7baec808ef MACsec: Add driver_ops
This defines new driver_ops to be used with MACsec.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:05:28 +03:00
Chandrasekaran, Manishekar
ea40a575ae nl80211: Use max associated STAs information in AP mode
Propagate max associated STAs in AP mode advertised by the driver to
core wpa_supplicant implemantion. This allows wpa_supplicant to update
the P2P GO group limit information automatically without having to
configure this limit manually. The information (if available) is also
used in the generic AP implementation to control maximum number of STA
entries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 17:12:19 +03:00
Eliad Peller
e4fa8b120b wpa_supplicant: Add Wake-on-WLAN configuration support
Add a new wowlan_triggers option to wpa_supplicant.conf. The triggers in
this key will be used to configure the kernel wowlan configuration.

For now, support only simple flags. More complex triggers can be added
later on.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-04-29 18:59:12 +03:00
Dmitry Shmidt
959214b260 Android: Use extended P2P functionality (ANDROID_P2P) for all vendors
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-04-29 18:59:12 +03:00
Ilan Peer
52f5877afa nl80211: Take ownership of dynamically added interfaces
Indicate to cfg80211 that interfaces created by the wpa_supplicant
or hostapd are owned by them, and that in case that the socket that
created them closes, these interfaces should be removed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-04-29 18:59:12 +03:00
Eduardo Abinader
e390df0553 nl80211: Cancel rfkill timeout on deinit
Got segfault, when freeing drv and there exists registered timeout for
blocked rfkill. This patch adds cancel timeout to avoid this.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-04-29 17:55:27 +03:00
Jouni Malinen
0bceb8d6f4 Make dl_list_first() and dl_list_last() uses easier for static analyzers
The previous check for dl_list_len() or having an entry from the list is
sufficient, but some static analyzers cannot figure out that
dl_list_first() and dl_list_last() will return non-NULL in this type of
cases. Avoid invalid reports by explicitly checking for NULL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
13a524a30d nl80211: Remove unnecessary wpa_driver_nl80211_set_freq() wrapper
This is not of any real use anymore with nl80211_set_channel() taking
care of channel setting operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Peng Xu
e87ef7517e nl80211: Add support for changing AP mode channel bandwidth
Configure driver with the new channel parameters (mainly, HT 20/40 MHz
bandwidth changes) as part of set_ap().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:09 +03:00
Jouni Malinen
30575183f6 Sync with mac80211-next.git nl80211.h
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:09 +03:00
Peng Xu
196c9c7cd2 Make channel parameters available in set_ap() driver operation
This provides information to allow the driver to be configured for
updated channel parameters, e.g., when dynamically changing HT20/HT40
bandwidth.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:16:51 +03:00
Jouni Malinen
0e80ea2c70 nl80211: Fix some coding style issues
Some trailing whitespace and spaces for indentation were present in the
driver wrapper and header files.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 19:27:07 +03:00
Jouni Malinen
a26582cb98 Make qca-vendor.h independent of other header files
Move the definitions that depended in common.h into a separate header
file so that qca-vendor.h can be copied and used as-is in other
projects.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 11:41:36 +03:00
Jouni Malinen
6d99bd8076 nl80211: Debug print HT/VHT capability override information
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-17 17:11:11 +03:00
Johannes Berg
bacb984b2d radiotap: Update radiotap parser to library version
Update the radiotap parser to the latest version of the
http://git.sipsolutions.net/radiotap.git/ library to get
parsing for vendor namespaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:49:59 +03:00
Jouni Malinen
142817b2f9 Add a wpa_supplicant ctrl_iface event for regdom changes
CTRL-EVENT-REGDOM-CHANGE event provides an external notification of
regulatory domain (and any driver channel list) changes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 16:32:38 +03:00
Jouni Malinen
d6a36f3956 nl80211: Mask out deauth even after own deauth request
This was already done for the disconnect event, but
SME-in-wpa_supplicant case needs to do same with the deauth event to
avoid getting extra events during WPS disconnect-and-reconnect sequence.
This can speed up WPS processing by removing unnecessary failures or
retries due to the extra event being processed during the next
association attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 11:39:49 +03:00
Felix Fietkau
83c4cb5217 nl80211: Handle multiple interface combinations for P2P
The first combination may allow single-channel concurrency for
P2P + managed, but there may be others that allow multi-channel
concurrency. Parse all of them to find the maximum number of channels.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2014-04-11 19:22:00 +03:00
Abhishek Singh
9392c9be7a nl80211: Use LEAVE_IBSS with driver-based-SME
NL80211_CMD_LEAVE_IBSS was used only with wpa_supplicant-based SME.
Extend this to drivers that implement SME internally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-10 19:51:51 +03:00
Janusz Dziedzic
bbbacbf2f8 DFS: Print CAC info in ctrl_iface STATUS command
Print CAC time and CAC left time in control interface STATUS command.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-03-28 23:02:45 +02:00
Maxime Bizon
5c9da160a5 nl80211: Set all BSS interfaces down when tearing down AP in MBSS mode
If the interface was not added by hostapd, it could have been left up
when disabling the AP.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
2014-03-27 16:45:25 +02:00
Sunil Dutt
96ecea5eb1 Pass TDLS peer capability information in tdls_mgmt
While framing the TDLS Setup Confirmation frame, the driver needs to
know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the
VHT/HT operation / WMM parameter elements accordingly. Supplicant
determines if the TDLS peer is VHT/HT/WMM capable based on the presence
of the respective IEs in the received TDLS Setup Response frame.

The host driver should not need to parse the received TDLS Response
frame and thus, should be able to rely on the supplicant to indicate
the capability of the peer through additional flags while transmitting
the TDLS Setup Confirmation frame through tdls_mgmt operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-27 15:18:48 +02:00
Jouni Malinen
78cd7e69de Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-03-25.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-27 14:50:39 +02:00
Maxime Bizon
b36935be1a nl80211: Fix EAPOL frames not being delivered
When hostapd choose to reuse an existing interface, it does not add it
to the set of interfaces from which we accept EAPOL packets.

Make sure we always add it to that set.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
2014-03-26 16:37:42 +02:00
Jouni Malinen
6997f8baab nl80211: Set interface address even if using old interface
If an existing interface is allowed to be used, its address better be
updated to match the requested one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-26 16:33:03 +02:00
Jouni Malinen
9b4d9c8bbc nl80211: Print if_indices list in debug log
This makes it easier to debug dynamic interface addition/removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-26 00:42:24 +02:00
Jouni Malinen
163f801ef2 nl80211: Indicate HS 2.0 OSEN AKM in connect/associate command
This allows drivers that build the WPA/RSN IEs internally to use similar
design for building the OSEN IE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Amar Singhal
65d645ce43 nl80211: Fetch DFS offload capability from driver
This uses a QCA vendor extension to determine if the driver supports
fully offloaded DFS operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-22 21:20:32 +02:00
Jouni Malinen
1b5df9e591 nl80211: Do not indicate scan started event on scan_for_auth
The scan_for_auth workaround for cfg80211 missing a BSS entry for the
target BSS during authentication uses a single channel scan controlled
within driver_nl80211.c. This operation does not indicate
EVENT_SCAN_RESULTS to the upper layer code. However, it did report
EVENT_SCAN_STARTED and this resulted in the radio work protection code
assuming that an external program triggered a scan, but that scan never
completed. This resulted in all new radio work items getting stuck
waiting for this scan to complete.

Fix this by handling the scan_for_auth situation consistently within
driver_nl80211.c by filtering both the EVENT_SCAN_STARTED and
EVENT_SCAN_RESULTS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-18 22:48:44 +02:00
Jouni Malinen
e8d70a739b nl80211: Hide deauth event due to forced deauth-during-auth
If NL80211_CMD_AUTHENTICATE fails due to exiting authentication, forced
deauthentication is used to clear cfg80211 start and a new
authentication command is retried. This resulted in an extra
disconnection event getting delivered to the core wpa_supplicant code
and that could end up confusing state there, e.g., by clearing
connection parameters like wpa_s->key_mgmt and preventing the following
association from reaching proper COMPLETED state with open networks.

Fix this by hiding the unnecessary disconnection event when using the
deauth-for-auth workaround.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 20:02:23 +02:00
Moshe Benji
8c06db703d nl80211: Fix P2P Device handling when starting with RF-kill blocked
On RF-kill, we should not request the kernel to start a P2P device. In
addition, we should call i802_set_iface_flags() both for a P2P Device
interface and any other interface instead of calling a dedicated
function for each.

Signed-off-by: Moshe Benji <Moshe.Benji@intel.com>
2014-03-11 19:22:03 +02:00
Simon Wunderlich
1d91f504e4 hostapd: Process management frames only once per BSS
At least in nl80211, broadcast management frames like Probe Request
frames, may be processed multiple times per BSS if multi-BSS is active
and NL80211_CMD_FRAME event is used to deliver them. In the case of
Probe Request frames, hostapd will create multiple redundant Probe
Response frames which are problematic when many BSS are on one channel.

This problem is caused by driver_nl80211 generating an event for
wpa_supplicant_event() for each BSS, and hostapd_mgmt_rx() calls
ieee802_11_mgmt() for each BSS, too.

Fix this by processing broadcast events only for the BSS the driver
intended to. The behavior is not changed for drivers not setting a BSS.

Signed-hostap: Simon Wunderlich <simon@open-mesh.com>
2014-03-11 19:07:25 +02:00
Jouni Malinen
e6ef73f188 nl80211: Add debug print of KEY_DATA and KEY_SEQ
While these were already available from elsewhere in the debug log, it
is convenient to have the values also available at the location where
the actual nl80211 command is issued.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 14:59:15 +02:00
Jouni Malinen
8f05577d11 Configure beacon interval for IBSS command
wpa_supplicant already allowed beacon interval to be configured for AP
mode operations, but this was not passed to the driver for IBSS even
though the same parameter can used for that case. Add this for the
nl80211 driver interface to allow beacon interval to be controlled for
IBSS as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 23:09:20 +02:00
Moshe Benji
354c903f8e AP/GO interface teardown optimization
This commit adds an option to optimize AP teardown by leaving the
deletion of keys (including group keys) and stations to the driver.

This optimization option should be used if the driver supports stations
and keys removal when stopping an AP.

For example, the optimization option will always be used for cfg80211
drivers since cfg80211 shall always remove stations and keys when
stopping an AP (in order to support cases where the AP is disabled
without the knowledge of wpa_supplicant/hostapd).

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
2014-03-05 23:57:02 +02:00
Jouni Malinen
6b9f7af651 nl80211: Extend the new vendor command for testing nl80211
CONFIG_TESTING_OPTIONS=y build of wpa_supplicant now allows arbitrary
cfg80211 commands to be performed through the new VENDOR ctrl_iface
command by using a special vendor_id ffffffff. The command identifier
(NL80211_CMD_*) is encoded as the subcmd and the attributes in the
hexformatted data area. Response attributes are returned as a hexdump.

For example, this shows a NL80211_CMD_FRAME and a response (cookie
attribute) on a little endian host:

wpa_cli -i wlan0 vendor ffffffff 59 080003004d0000000800260085090000....
0c00580000d7868c0388ffff

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-05 17:19:58 +02:00
Andrei Otcheretianski
819f096f5b nl80211: Fix RTM event handling for dynamic interfaces
When an interface is disabled through rtm event, wpa_supplicant's
EVENT_INTERFACE_DISABLED is generated, which in turn, may
completely destroy wpa_driver_nl80211_data struct (drv). This
scenario happens now when P2P GO interface is disabled. Since this
struct may be used later in this function it causes segmentation fault.

Fix it by trying to find drv again in the interface list after
wpa_supplicant's event handling.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-03-04 22:30:48 +02:00
Beni Lev
adef89480d nl80211: Add vendor command support
Add a callback to the driver interface that allows vendor specific
commands to be sent. In addition, a control interface command is added
to expose this new interface outside wpa_supplicant:

Vendor command's format:
VENDOR <vendor id> <sub command id> [<hex formatted data>]

The 3rd argument will be converted to binary data and then passed as
argument to the sub command.

This interface is driver independent, but for now, this is only
implemented for the nl80211 driver interface using the cfg80211 vendor
commands.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2014-03-04 22:24:20 +02:00
Felix Fietkau
d0595b25b4 nl80211: Fix tearing down WDS STA interfaces
wpa_driver_nl80211_if_remove() checks bss->if_added before deleting an
interface, which is 0 for the first BSS. The only part of
wpa_driver_nl80211_if_remove() that should get called for WDS STA
interfaces is the call to nl80211_remove_iface(), which can be pulled in
here directly.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2014-03-04 20:13:01 +02:00
Jouni Malinen
a8716d13bf roboswitch: Verify that register read succeeds before comparing result
If wpa_driver_roboswitch_read() fails before such comparison, the values
that are being compared are not initialized properly and as such, there
is not much point in comparing them either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:12 +02:00
Jouni Malinen
d12eb581f9 test: Use more consistent NULL checking for associate ssid parameter
This was checked once against NULL, but not on the following uses.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:11 +02:00
Jouni Malinen
64abb725ba nl80211: Allow old r-o-c offchannel TX to be tested
no_offchannel_tx=1 driver parameter can now be used to force the older
remain-on-channel -based offchannel TX design to be used with
mac80211_hwsim. This can be used to increase test coverage with the
hwsim test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Kyeyoon Park
0052ce499a atheros: Add support for OSEN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-01 00:38:04 +02:00
Jouni Malinen
a14896e8bb HS 2.0R2 AP: Add OSEN implementation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
95a3ea9426 HS 2.0R2: Add WNM-Notification Request for Subscription Remediation
Subscription remediation notification WNM-Notification Request is now
shown in the following way in wpa_supplicant control interface:
<3>HS20-SUBSCRIPTION-REMEDIATION http://example.com/foo/

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
ae6f927258 nl80211: Add driver capability for GTK_NOT_USED
Many drivers support operation without GTK configured, but most (if any)
today do not advertise this. Handle this by skipping GTK cipher suite
configuration if the driver did not advertise support in order to work
around cfg80211 validation steps.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:22 +02:00
Jouni Malinen
bfb79dde63 nl80211: Show regulatory rule flags in debug output
These can be useful in understanding why some channels are disabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 13:55:07 +02:00
Ilan Peer
be24917df6 nl80211: Use nl80211_set_iface_id() to get hw features data
Use nl80211_set_iface_id() in wpa_driver_nl80211_get_hw_feature_data(),
as otherwise the function fails for a P2P Device interface (which does
not have a netdev associated with it).

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2014-02-14 19:30:27 +02:00
Marek Kwaczynski
8a45811638 hostapd: Add Operating Mode Notification support
Handle Operating Mode Notification received in (Re)Association Request
frames.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2014-02-14 19:30:05 +02:00
Dmitry Shmidt
7ac7fd43aa Add bssid/freq hint for driver-based BSS selection
This uses the new nl80211 attributes to allow the connect command to
provide bssid and freq hints to the driver without limiting roaming to
the specific BSS/frequency. This can be used by drivers that perform
internal BSS selection (WPA_DRIVER_FLAGS_BSS_SELECTION) as a candidate
for initial association.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-02-13 15:14:18 +02:00
Jouni Malinen
56ec49c540 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-02-12.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-13 14:35:01 +02:00
Yun Park
72e7fb3fd9 nl80211: Fix regression in returning to AP mode after scan
Commit b1f625e0d8 extended
ap_scan_as_station to be able to distinguish between AP and P2P GO
iftypes. However, it did this in a way that completely lost the original
mode because drv->nlmode had already been replaced with the station
mode. Fix this by storing the correct old mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-05 22:53:59 +02:00
Jouni Malinen
8597ebdbd4 Fix hostapd segfault on beacon hint event
Commit 795baf773f ('hostapd: Filter
channel list updated events after country code change') uses the
EVENT_CHANNEL_LIST_CHANGED data pointer, but it updated only one of the
callers to provide that data. NL80211_CMD_REG_BEACON_HINT event was
still sending the event without the initiator data and resulted in NULL
pointer dereference, e.g., if a scan was run while hostapd was running
and the driver was in world roaming state and enabled a channel for
active scans.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-03 19:34:59 +02:00
Masashi Honma
c69ed4dd49 bsd: Fix hostapd compiler warning
The hostapd compilation displays a below warning On NetBSD 6.1.2.

../src/drivers/driver_bsd.c:72:1: warning: 'get80211opmode' defined but not used

This patch solves it and moves other functions to appropriate position to
reduce #ifdef.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2014-02-03 19:34:49 +02:00
Janusz Dziedzic
1412beeee9 nl80211: Show DFS region info in debug messages
Print DFS region info, if provided, when printing regulatory
information.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-01-30 14:10:25 +02:00
Johannes Berg
ff5e1d14af nl80211: Treat RSSI as part of each sched scan matchset
The original RSSI filter semantics for scheduled scan were
really confusing - a separate matchset was created, but it
wasn't actually treated as a separate matchset in the kernel
but rather used as the global RSSI value. The RSSI matchset
thus behaved like an RSSI filter outside of the matchsets,
being ANDed rather than ORed (as normal between matchsets.)

To make this less confusing, I changed the kernel API a bit
to actually treat the RSSI inside each matchset properly,
but keeping it compatible with the old approach by using a
matchset with only an RSSI value as the default for all the
other matchsets, and adding it as a separate matchset only
if it's the only one.

The proper way for wpa_supplicant to do this then would be
to add the RSSI to each SSID matchset, and only add another
matchset without SSID if there's none with.

However, to keep compatibility with older kernels, always
keep the non-SSID matchset and only add the RSSI to all the
other matchsets. This gets close to the desired behaviour,
the only difference would be that we shouldn't add the RSSI
matchset if there are others, but stays compatible with old
and new kernels, as new ones ignore the RSSI-only matchset
if there are others and those others have an RSSI.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2014-01-30 14:03:53 +02:00
Michal Kazior
4b0f2282cb nl80211: Fix channel switching with VHT80
It is possible for channel switch notification to be missing channel
type attribute. This is true at least for VHT80. This led to
iface->conf->secondary_channel being set to 0. This in turn made
subsequent DFS-triggered CSA to fail due to invalid frequency
parameters.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2014-01-30 13:58:48 +02:00
Shital Jaju
e28f39b7e9 nl80211: Verify that ifindex attribute is included in survey
This checks if the NL80211_ATTR_IFINDEX attribute is present before
trying to get the value of interface index.

Signed-hostap: Shital Jaju <shitalj@broadcom.com>
2014-01-30 13:44:07 +02:00
Arif Hussain
253f2e3795 P2P: Apply unsafe frequency rules to available channels
This adds a QCA vendor specific nl80211 event to allow the driver to
indicate a list of frequency ranges that should be avoided due to
interference or possible known co-existance constraints. Such
frequencies are marked as not allowed for P2P use to force groups to be
formed on different channels.

If a P2P GO is operating on a channel that the driver recommended not to
use, a notification about this is sent on the control interface and
upper layer code may decide to tear down the group and optionally
restart it on another channel. As a TODO item, this could also be changed
to use CSA to avoid removing the group.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 11:49:05 +02:00
Jouni Malinen
1682c62360 Add a header file defining QCA OUI and vendor extensions
This file is used as a registry of identifier assignments from the
Qualcomm Atheros OUI 00:13:74 for purposes other than MAC address
assignment. One of the first uses will be for nl80211 vendor
commands/events which is reason for the preparation change in
driver_nl80211.c

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-24 15:58:00 +02:00
Jouni Malinen
c5a64e2d51 GAS client: Use Protected Dual of Public Action frames with PMF
When GAS is used with PMF negotiated, Protected Dual of Public Action
frames are expected to be used instead of Public Action frames, i.e.,
the GAS/ANQP frames are expected to be encrypted. Conver Public Action
GAS queries to use Dual of Public Action frame if PMF has been
negotiated with the AP to which the frame is being sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:50:28 +02:00
Max Stepanov
080cc445df nl80211: Fix sizeof check in vendor command/event handling
Fix sizeof in a validity comparison of nl80211_vendor_cmd_info size. The
incorrect version happened to work on 64-bit builds due the structure
being eight octets, but this was incorrect and would not used with
32-bit builds.

Signed-hostap: Max Stepanov <Max.Stepanov@intel.com>
2014-01-22 19:30:20 +02:00
Sunil Dutt
efc64886b8 nl80211: Pass station supported channel and oper class info
Pass station supported channel and operating class information to kernel
for TDLS peers.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>x
2014-01-14 17:24:33 +02:00
Sunil Dutt
3ed97271ba TDLS: Pass peer's Supported channel and oper class info during sta_add
The information of the peer's supported channel and operating class
is required for the driver to do TDLS off channel operations with a
compatible peer. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-14 17:24:33 +02:00
Jouni Malinen
bfdc2a3172 bsd: Fix NULL pointer dereference on error path
The error path in bsd_init() on struct bsd_driver_data allocation was
jumping to location where drv is dereferenced. That will crash and it is
easier to just return from the function since no cleanup steps are
needed in this case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 15:58:01 +02:00
Masashi Honma
38bbd06ecf bsd: Prepare event buffer on init process
Currently these three steps runs for each event.
1. get buffer size via system
2. allocate a memory for event
3. free the memory

The wpa_supplicant receives 4 events from boot to be connected.
So this patch prepare the event buffer at the init process.

I have tested wpa_supplicant on NetBSD 6.1.2.
But I could not tested hostapd because I do not have AP enabled device.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2014-01-07 15:56:06 +02:00
Jouni Malinen
90a545ccba nl80211: Clean up netlink parsing and debug prints
This makes the RTM_NEWLINK, RTM_DELLINK, and operstate debug messages
easier to understand.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Andrei Otcheretianski
991aa9c73f nl80211: Move CS supported flag to wpa_driver_capa
Replace channel_switch_supported flag of the
wpa_driver_nl80211_data by WPA_DRIVER_FLAGS_AP_CSA inside
wpa_driver_capa.flags. It makes more sense and also can
be accessed by wpa_supplicant.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-01-07 10:45:12 +02:00
Jouni Malinen
dd43aaa509 Add helper functions for cloning and freeing scan parameters
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:35:52 +02:00
Jouni Malinen
949938aadf Ask driver to report only new scan results if requested
If the BSS table within wpa_supplicant is flushed, request the driver to
flush its own scan result table during the next scan. This can avoid
unexpected old BSS entries showing up after BSS_FLUSH or FLUSH command
in cases where the driver may maintain its internal cache of scan
results (e.g., cfg80211 BSS table persists at least for 15 seconds).

In addition to doing this automatically on BSS_FLUSH/FLUSH, a new SCAN
command argument, only_new=1, can be used to request a manual scan
request to do same. Though, it should be noted that this maintains the
BSS table within wpa_supplicant. BSS_FLUSH followed by SCAN command can
be used to clear all BSS entries from both the driver and
wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 23:03:31 +02:00
Jouni Malinen
101bdc2e8c Remove forgotten notes about already removed driver wrappers
These old driver wrappers have been removed quite some time ago, but
some of the build configuration notes were still describing how they
are configured.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 10:23:30 +02:00
Jouni Malinen
17b79e65a9 nl80211: Initial support for vendor commands and events
Print into the debug log the list of vendor commands and events that the
driver supports. In addition, add a generic handler for vendor events.
This can be extended for each vendor/subcmd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 23:47:35 +02:00
Jouni Malinen
fcc61230d1 Declare wpa_drivers in src/drivers/driver.h
This avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:19:37 +02:00
Jouni Malinen
327b01d3d7 nl80211: Add driver param for forcing monitor and connect APIs
use_monitor=1 and force_connect_cmd=1 driver parameters can now be used
to force older monitor interface design and the connect API (SME in
driver) to increase hwsim testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
6f06766e71 nl80211: Fix nl_mgmt handling in partial error case
If Action frame registration in nl80211_mgmt_subscribe_non_ap() failed
for any frame type, the previous implementation skipped
nl80211_mgmt_handle_register_eloop() call. This is not desirable since
none of the Action frame types could be received and even worse, the
following nl80211_destroy_eloop_handle() call for nl_mgmt would likely
result in crashing the process due to the ELOOP_SOCKET_INVALID XOR
operation. This could be triggered at least in a P2P group interface
startup failure case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
4ea6a47133 nl80211: Prefer newer scan result over older during duplicate removal
Previously, it was possible for bss_info_handler() to end up dropping a
newer scan result entry if there were two entries with the same BSSID
and SSID (i.e., only frequency was different) and we were not associated
with either. This could happen, e.g., in some P2P use cases where device
discovery may happen on different channels. Fix this by checking the age
of the scan entries as well to prefer the most recent response.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
2eef5177ad nl80211: Report set_supp_port failures in debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
a0bdd1916f nl80211: Share a helper function for connect and associate commands
Most of the attributes to these commands are identical and there is no
need to maintain two copies of the same functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
4848a38d85 Get rid of duplicated cipher suite and AKM definitions
WPA_CIPHER_* and CIPHER_* are used for the exact same set of cipher
suites with the main difference being that the WPA_CIPHER_* version is
suitable to be used as a bitfield. Similarly, WPA_KEY_MGMT_* and
KEY_MGMT_* have similar design for AKMs. There is no need to maintain
two separate copies of the definitions since the bitfield compatible
version can be used for both needs. Get rid of the CIPHER_* and
KEY_MGMT_* versions to clean up the implementation by getting rid of
unnecessary mapping functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
de4ed4a89b nl80211: Use helper functions for cipher suite mapping
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
a565084f96 nl80211: Set control port for NL80211_CMD_COMMAND
NL80211_ATTR_CONTROL_PORT was previously set only for
NL80211_CMD_ASSOCIATE, but it should also be set when using
NL80211_CMD_COMMAND (driver-based SME) even though none of the current
non-mac80211 drivers use this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:15:49 +02:00
Jouni Malinen
35f3d3ed5f nl80211: Clean up regulatory rule debug prints
Combine maximum bandwidth and EIRP into a single debug print.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-30 23:35:48 +02:00
Jouni Malinen
880de8851e nl80211: Print frame registration match on same debug line
This makes debug log a bit more readable.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-30 23:35:48 +02:00
Jouni Malinen
152cff6ba6 P2P: Remove WPA_DRIVER_FLAGS_P2P_MGMT option
The option of handling upper layer P2P management operations within the
driver/firmware was originally planned to be used with wpa_supplicant,
but this has not really happened and there is no clear sign of this
being needed in the near term either. This functionality has not been
completed and it is certainly not being kept up-to-date or tested. As
such, it is best to remove it for now and if this or something similar
is needed in the future, it can be brought back once a clear need for it
has been demonstrated first.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 18:20:47 +02:00
Jouni Malinen
dbfb8e82ff Remove unnecessary EVENT_RX_ACTION
This driver event was used separately for some Action frames, but all
the driver wrappers converted to this from information that would have
been enough to indicate an EVENT_RX_MGMT event. In addition, the
received event was then converted back to a full IEEE 802.11 management
frame for processing in most cases. This is unnecessary complexity, so
get rid of the extra path and use EVENT_RX_MGMT for Action frames as
well as other management frame subtypes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
2d2ecf51aa nl80211: Fix protected Action frame reporting for AP mode
Action frame RX report through EVENT_RX_ACTION did not indicate whether
the frame was protected or not even though that information is available
in mlme_event_mgmt(). hostapd_rx_action() has a workaround for setting
the protected flag for SA Query frames, but that did not apply for other
frames, like FT Action. This broke FT-over-DS when PMF is enabled with
newer kernel versions (i.e., the ones that do not use monitor interface
for receiving management frames).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
a5f40eff18 Track whether scan was started by us or an external program
This can be used to improve scan behavior in cases external programs
request scans directly from the driver.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
18ae237783 Fix comment format
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
3ae3ec2727 nl80211: Add scanned frequencies/SSIDs into debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
bee25cc932 nl80211: Fetch cipher capabilities from the driver
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-25 11:07:58 +02:00
Jouni Malinen
5f9c134ab4 Remove obsolete license notifications
These files have been distributed only under the BSD license option
since February 2012. Clarify the license statements in the files to
match that to avoid confusion.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:59:52 +02:00
Jouni Malinen
bd1e328047 Android: Remove old WEXT extensions
Android has moved to nl80211, so no need to maintain these old WEXT
extensions in wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:52:18 +02:00
Jouni Malinen
30675c3416 Add definitions for new cipher suites from IEEE Std 802.11ac-2013
This adds initial parts for supporting the new GCMP-256, CCMP-256,
BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 22:21:04 +02:00
Johannes Berg
acb69cec6f wpa_supplicant: Use monotonic time for RX/BSS times
The BSS table, scan timeout, and related functionality should use
monotonic time since they care about relative values (age) only.
Unfortunately, these are all connected, so the patch can't be split
further. Another problem with this is that it changes the driver wrapper
API. Though, it seems only the test driver is using this.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:27:02 +02:00
Jouni Malinen
429dd9aff1 Advertise QoS Map support based on driver capability
Do not assume the driver supports QoS Mapping, but instead, advertise
support for this only if CONFIG_INTERWORKING is defined and driver
indicates support for configuring QoS Map.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-23 11:05:20 +02:00
Kyeyoon Park
049105b486 nl80211: Add support for QoS Map configuration
This allows nl80211-based drivers to configure QoS Mapping in both AP
and station modes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-23 10:44:59 +02:00
Jouni Malinen
74ddd64b26 nl80211: Sync with mac80211-next.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-23 10:44:54 +02:00
Jouni Malinen
9fcd300db6 nl80211: Sync with wireless-testing.git
The driver_nl80211.c changes are needed to avoid compiler warnings
with two frequency attributes pointing to the same value.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-23 10:44:48 +02:00
Janusz Dziedzic
8d1fdde7f0 nl80211/hostapd: Extend channel switch notify handling
Adds support for VHT by parsing bandwidth and center_freq{1,2}.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-12-07 20:50:15 -08:00
Masashi Honma
e706d2d30d bsd: Fix compilation error for NetBSD
Commit 5dd82c634c causes compilation error
on NetBSD 6.1.2. Fix compilation with #ifdef blocks.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2013-12-07 17:46:41 -08:00
Jouni Malinen
7feff06567 Add CONFIG_CODE_COVERAGE=y option for gcov
This can be used to measure code coverage from test scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:16:12 +02:00
Jouni Malinen
158b090cda nl80211: Fix regression in P2P group interface removal
Commit 390e489c0d extended hostapd BSS
interface removal capabilities. However, it ended up causing a
regression in wpa_supplicant P2P group interface handling. That P2P
group interface is removed through another driver_nl80211.c BSS context
and as such, the bss->added_if is not set. Fix this by verifying whether
the request is for another ifindex and if so, removing the interface
even if added_if is not marked.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 12:41:32 +02:00
Dmitry Shmidt
982189632f Android: Revert static field back to send_and_recv_msgs()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 23:12:40 +02:00
Jouni Malinen
5e2c3490d5 Android: Add driver_cmd for arbitrary driver commands
This is a mechanism used in Android to extend driver interface in vendor
specific ways. This is included only for the purpose of Android
compatibility. Proper interface commands should be used for any new
functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:08 +02:00
Jouni Malinen
0de3803610 Android: Add P2P/WPS wrappers for private lib
Android uses a vendor specific library for implementing couple of driver
interface functions. Add the wrapper code to allow that mechanism to be
used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:03 +02:00
Andrei Otcheretianski
e44a384b68 Move AP parameter filling into a helper function
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
1c4ffa8746 nl80211: Add channel switch implementation
Implement nl80211 switch_channel() operation.
Publish flags indicating kernel support for channel switch.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:49 +02:00
Andrei Otcheretianski
dcca2219ae wpa_supplicant: Update channel switch driver interface
Add csa_settings struct which holds parameters for CSA. Change driver
interface for switch_channel(), so that it will receive this struct and
not only the new frequency as it was before. This allows wpa_supplicant
to provide all the required parameters (beacons, proberesp, assocresp,
CSA IE) which are required by cfg80211 implementation.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 16:48:33 +02:00
Jouni Malinen
3505743395 Sync with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 16:48:03 +02:00
Abhishek Singh
795baf773f hostapd: Filter channel list updated events after country code change
We were not filtering the EVENT_CHANNEL_LIST_CHANGED events based on the
regulatory hint initiator. So wait for EVENT_CHANNEL_LIST_CHANGED event
after our own change was triggered even when regulatory hint initiator
was the driver. This could result in the wait for the channel list to be
updated to be terminated before the real change has occurred and as
such, old channel list remaining in use when configuring
hostapd/wpa_supplicant country parameter. Fix this by filtering the
hints according to the initiator and only regulatory hints initiated by
user will be used to stop the wait.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-15 02:59:55 +02:00
Jouni Malinen
146fa9b38f nl80211: Do not force interface down on deinit
If wpa_supplicant or hostapd was started with the interface
already up, do not force interface down on deinit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-09 18:05:54 +02:00
Jouni Malinen
49b4b2058b nl80211: Do not for station mode on hostapd deinit
If hostapd was started with the interface already in AP mode, leave the
interface in AP mode on deinit instead of unconditionally forcing it to
station mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-09 17:29:32 +02:00
Jouni Malinen
04eff7d5ba nl80211: Remove build time condition on HOSTAPD define
It is common to build wpa_supplicant with AP mode support and it is
justifiable to clean up driver_nl80211.c by removing the conditional
build blocks based on hostapd vs. wpa_supplicant builds.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-09 17:22:49 +02:00
Jouni Malinen
0d547d5ff8 nl80211: Share more code between hostapd and wpa_supplicant
This gets rid of some ifdef HOSTAPD constructs and shares more
of the initialization code between hostapd and wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-09 17:09:02 +02:00
Jouni Malinen
7b7de4cf94 nl80211: Remove read-only last_freq/last_freq_ht
These variables were originally used in hostapd to clear HT channel
information when exiting. However, that functionality was lost with
commit f019981aee when moving to a common
code for setting the channel. Taken into account that no one seems to
have missed this functionality over the last four years, it seems safe
to drop this rather than try to fix the old hostapd behavior.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-09 17:02:05 +02:00
Jouni Malinen
1c6edec60c nl80211: Work around nl_socket_set_nonblocking on Android
system/core/libnl_2 does not include nl_socket_set_nonblocking(), so
need to implement that to fix the build.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 17:10:34 +02:00
Jouni Malinen
149338020b drivers: Do not call hostapd_logger()
This call requires a struct hostapd_data pointer and that is not really
something that the driver wrappers should be using.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-06 00:19:46 +02:00
Jouni Malinen
f0793bf191 hostapd: Wait for channel list update after country code change
If hostapd is requested to set the country code and the previous country
code differs from the new one, the channel list information from the
driver may change. This change may not be instant, so wait for an
EVENT_CHANNEL_LIST_CHANGED event before continuing interface setup with
fetching of the channel list information. This fixes issues where the
selected channel is not available based on the previous regulatory data
and update through CRDA takes some time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
884f1a3c65 nl80211: Verify radar event attributes exist before using them
While these attributes may be expected to be present always, this needs
to be verified within driver_nl80211.c since we cannot depend on the
kernel/driver working correctly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 11:31:48 +02:00
Jouni Malinen
2aec4f3c0c Allow add-BSS operation to re-use existing netdev
When removing and re-adding the first wlan# netdev to hostapd
dynamically, the netdev is already present and should not be removed and
re-added to maintain its state as not-added-by-hostapd so that it does
not get removed automatically.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:34:25 +02:00
Kyeyoon Park
390e489c0d hostapd: Allow the first BSS in a multi-BSS setup to be removed
This moves the vif added check from core hostapd to the driver wrapper
(only driver_nl80211.c uses this) and reorders operations a bit to allow
the first BSS (vif) to be removed from a multi-BSS setup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:31 +02:00
Kyeyoon Park
834ee56f78 nl80211: Make wpa_driver_nl80211_data::first_bss pointer
This is needed to allow the first BSS to be removed and replaced by the
next one in the list.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:31 +02:00
Jouni Malinen
748c0ac0e7 nl80211: Fix monitor interface reference counting
The first user of monitor interface was not counted and that could
result in the monitor interface getting removed if the initial interface
was removed from a multi-BSS setup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:31 +02:00
Jouni Malinen
08e55ebbb0 nl80211: Add a debug print for DEL_BEACON
This is quite helpful in debugging beaconing issues.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-31 22:00:12 +02:00
Jouni Malinen
bbc706a3c3 nl80211: Add debug prints for NL80211_CMD_SET_STATION
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-30 00:38:57 +02:00
Eliad Peller
53cfad46e2 nl80211: Mark VHT 80 MHz channels
Later on, we'll consider the availability of these
channels when starting P2P GO with VHT support.

Signed-hostap: Eliad Peller <eliadx.peller@intel.com>
2013-10-27 19:37:10 +02:00
Helmut Schaa
6651f1f9f1 nl80211: Use max tx power from regulatory domain
Previously the Country element contained the max TX power the local
hardware was capable of. Change this to just use the regulatory limit.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2013-10-27 18:42:16 +02:00
Jouni Malinen
7ac3616d0f nl80211: Replace perror() and printf() calls with wpa_printf()
This avoids use of stderr and makes debug messages more consistent.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-27 17:58:12 +02:00
Jouni Malinen
e7ecab4a3b Use ARRAY_SIZE() macro
Replace the common sizeof(a)/sizeof(a[0]) constructions with a more
readable version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:49:05 +03:00
Jouni Malinen
34068ac3b1 nl80211: Add debug prints on nl_recvmsgs() failure
These libnl calls could potentially fail and it is useful to know if
that has happened.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:48:28 +03:00
Johannes Berg
10b8592183 nl80211: Make eloop sockets non-blocking
To avoid a problem where the beacon socket occasionally
blocks, mark any sockets on the eloop as non-blocking.
The previous patch reordered the code to never send a
command after a socket was put on the eloop, but now also
invalidate the nl handle pointer while it's on there.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-26 17:48:22 +03:00
Johannes Berg
5f65e9f717 nl80211: Abstract handling of sockets on eloop
Abstract the handling of sockets on the eloop to avoid
destroying sockets still on the eloop and also to allow
the next patch to mark the socket non-blocking.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-26 17:48:17 +03:00
Johannes Berg
e8d1168b73 nl80211: Register for IBSS auth frames before eloop
The IBSS code registers the bss nl_mgmt socket for auth
frames when the join event happens, but that is too late
as then the socket is already on the eloop, which could
cause problems when other events are received at the
same time as the registration is done.

Move the auth frame registration to the initial setup
before the socket is put onto the eloop.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-10-26 17:48:09 +03:00
Jouni Malinen
0f0120148a Verify that readlink() did not truncate result
linux_br_get() was forcing null termination on the buffer, but did not
check whether the string could have been truncated. Make this more
strict by rejecting any truncation case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:39 +03:00
Jouni Malinen
f5eb9da304 nl80211: Clean up if_add() for hostapd use
The allocation of new_bss and its use was separated by a lot of code in
this function. This can be cleaned up by moving the allocation next to
the use, so that this all can be within a single #ifdef HOSTAPD block.
The i802_check_bridge() call was outside type == WPA_IF_AP_BSS case, but
in practice, it is only used for WPA_IF_AP_BSS (and if used for
something else, this would have resulted in NULL pointer dereference
anyway).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:30 +03:00
Jouni Malinen
6cb4f11dba nl80211: Fix strerror() value in P2P Dev debug messages
send_and_recv_msgs() returns negative errno, so need to use -ret in the
strerror() call.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:18 +03:00
Jouni Malinen
24f051eb14 Replace remainining strncpy() uses with strlcpy()
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:54:47 +03:00
Michal Kazior
cd3b0700df nl80211: Fix DFS radar event parsing
Incorrect nla_get variants were used to get event type and frequency.
Kernel passes both as u32. This caused issues on tinynl/big-endian hosts
- CAC finished was treated as radar detection and frequency was 0.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-10-22 15:50:07 +03:00
Jouni Malinen
2b72df6374 nl80211: Free BSS structure even if netdev does not exists
It is possible for a vif netdev to be removed by something else than
hostapd and if that happens for a virtual AP interface, if_remove()
handler should still free the local data structure to avoid memory leaks
if something external removes a netdev.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-22 13:35:32 +03:00
Jouni Malinen
41cc50d19e nl80211: Update send_action_cookie on AP-offchannel-TX path
Previously, the send_mlme->send_frame->send_frame_cmd path that could be
used when a GO sends an offchannel Action frame ended up not updating
drv->send_action_cookie. This can result in an issue with not being able
to cancel wait for the response, e.g., in invitation-to-running-group
case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-21 18:24:20 +03:00
Jouni Malinen
56f5af489c Interworking: Add support for QoS Mapping functionality for the STA
Indicate support for QoS Mapping and configure driver to update the QoS
Map if QoS Map Set elements is received from the AP either in
(Re)Association Response or QoS Map Configure frame.

This commit adds support for receiving the frames with nl80211 drivers,
but the actual QoS Map configuration command is still missing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Kyeyoon Park
850e1c2579 atheros: Add support for QoS Mapping configuration
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Kyeyoon Park
c551700f1f Interworking: Add support for QoS Mapping functionality for the AP
This allows QoS Map Set element to be added to (Re)Association Response
frames and in QoS Map Configure frame. The QoS Mapping parameters are
also made available for the driver interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Janusz Dziedzic
846de15d7b DFS: Add more parameters to radar events
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:39 +03:00
Janusz Dziedzic
04e8003c6c nl80211: Use struct hostapd_freq_params with start_dfs_cac
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:31 +03:00
Jouni Malinen
a771c07dfc Add driver status information to control interface
STATUS-DRIVER command can now be used to fetch driver interface status
information. This is mainly for exporting low-level driver interface
information for debug purposes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 17:19:30 +03:00
Jouni Malinen
739faee2a9 nl80211: Add some more debug prints for mgmt frame TX
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 12:10:57 +03:00
Jouni Malinen
f78f278520 nl80211: Fix off-channel Action frame TX from GO with use_monitor
TX frequency gets lost when going through the monitor send MLME option
and this resulted in P2P operations like invitation from a GO failing
when the driver needs monitor socket, but would support offchannel TX.
Fix this by using frame_cmd path instead in case the monitor socket
would have been hit for action frame TX.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-28 12:08:19 +03:00
Jouni Malinen
af96448488 nl80211: Add more debug prints for send_mlme operations
This makes it easier to debug issues in incorrect channel use in
management frame transmission.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 23:18:33 +03:00
Jouni Malinen
5d4c78fb1f nl80211: Reset nlmode to station on leaving IBSS
Previously, IBSS mode (NL80211_IFTYPE_ADHOC) was left in drv->nlmode
when leaving IBSS. This causes issues for send_mlme() handler for P2P
Probe Response transmission in Listen state. Fix this by clearing nlmode
back to NL80211_IFTYPE_STATION on leaving IBSS so that following P2P
operations can be executed correctly. Previously, this was fixed only
when the next authentication/association attempt in station mode
occured.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 23:14:41 +03:00
Jouni Malinen
f18b7817ec nl80211: Print more debug info on management frame RX information
This can be useful in figuring out how drv->last_mgmt_freq gets set
to debug issues with P2P frames being sent on incorrect channel.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 17:42:00 +03:00
Kyeyoon Park
3ca96df596 atheros: Compile fix for driver code not defining IEEE80211_APPIE_FRAME_WNM
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-25 14:44:16 +03:00
Michal Kazior
50f4f2a066 hostapd: Add Automatic Channel Selection (ACS) support
This adds ACS support to hostapd. Currently only survey-based
algorithm is available.

To use ACS you need to enable CONFIG_ACS=y in .config and use
channel=0 (or channel=acs_survey) in hostapd.conf.

For more details see wiki page [1] or comments in src/ap/acs.c.

[1]: http://wireless.kernel.org/en/users/Documentation/acs

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-08-31 11:51:06 +03:00
Michal Kazior
0185007c2e hostapd: Add survey dump support
This adds survey dump support for all frequencies
and for specific desired frequencies. This will later
be used by ACS code for spectrum heuristics.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-08-25 18:35:25 +03:00
Rui Paulo
ba873bdf86 wired: Wait for the link to become active before sending packets
Interfaces that take one or two seconds to reconfigure the link after we
set IFF_ALLMULTI or after we bring the interface up were dropping the
initial TX EAPOL packet which caused excessive delays in authentication.
This change applies to FreeBSD/DragonFly only.

Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-25 11:40:19 +03:00
Ilan Peer
bf83eab553 nl80211: Start P2P Device when rfkill is unblocked
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-08-25 10:43:52 +03:00
Ilan Peer
60b13c2017 nl80211: Do not change type to station on P2P interfaces
It is possible that when trying to remove a dynamically added interface,
changing its type to station mode is not possible (since the kernel does
not support so in its interface combinations).

Since P2P interfaces are always dynamically added, avoid changing their
type to station in the deinit_ap() and deinit_p2p_client() nl80211
callbacks, assuming that the interface is about to be removed.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-08-25 10:20:54 +03:00
Jouni Malinen
b378c41fbc nl80211: Fix deinit path to unregister nl_mgmt socket
Commit 8e12685c43 replaced call to
nl80211_mgmt_unsubscribe() on the deinit path with a
wpa_driver_nl80211_set_mode() call. This is not enough to unregister the
bss->nl_mgmt read socket in all cases. Fix this by unconditionally
unsubscribing from the nl80211 events after having change mode to
station.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-08-24 23:45:11 +03:00
Sunil Dutt
30158a0d80 nl80211: Update the assoc_freq during connect
drv->assoc_freq was not updated during the connect command (neither
during the command's invocation nor after getting the event) unlike with
auth/assoc case where assoc_freq is updated. This resulted in
nl80211_get_link_noise() (and any other function for that matter) using
the improper drv->assoc_freq value with drivers that use the connect
API. Fix this by updating drv->assoc_freq on connect command and when
fetching the frequency from the driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 15:41:05 +03:00
Jouni Malinen
83e7bb0e5d nl80211: Add more debug prints for DEL_STATION commands
This makes the debug log clearer on AP mode STA operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 12:03:28 +03:00
Rui Paulo
646f12ad4c bsd: Add a commit routine
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 11:03:44 +03:00
Rui Paulo
32dc6a319e bsd: Mark define sta_set_flags() only for hostapd
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 11:02:55 +03:00
Rui Paulo
70a867c268 bsd: Mark the interface down before opening the routing socket
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 11:01:12 +03:00
Rui Paulo
89f4690005 bsd: Compute the RSSI level
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 10:57:51 +03:00
Rui Paulo
5dd82c634c bsd: Set IEEE80211_KEY_NOREPLAY in IBSS/AHDEMO mode
Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 10:57:10 +03:00
Rui Paulo
cb76af8a35 bsd: Skip SIOCSIFFFLAGS ioctl when there is no change.
Don't issue SIOCSIFFLAGS if the interface is already up or already down.

Signed-hostap: Rui Paulo <rpaulo@FreeBSD.org>
2013-08-07 10:54:16 +03:00
Sameer Thalappil
7239ea7f01 nl80211: Add stop AP mode event API
Stop AP command can be used by the driver as an event to indicate that
AP mode has stopped operation. WLAN driver may have encountered errors
that has forced the driver to report this event or concurrent operations
on virtual interfaces may have forced AP operation to be stopped. When
in P2P GO mode, wpa_supplicant uses this event to remove P2P group to
keep in sync with the driver state.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-06 23:28:40 +03:00
Jouni Malinen
dc01de8a0e nl80211: Fix TDLS key configuration to not set TX key index
The nl80211 command for setting the TX index does not distinguish TDLS
vs. AP key and as such, the driver would not know what this set TX key
index operation is doing in the TDLS case. This could result in the TX
key index for AP being changed instead if static WEP is used in the AP
connection. Fix the issue by not setting TX key index when configuring a
TDLS key.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 18:34:16 +03:00
Ilan Peer
932659696e nl80211: Remove unused WPA_DRIVER_FLAGS_MULTI_CHANNEL_CONCURRENT
This is not used anymore after the previous commits that changed the
driver interface to use number of supported concurrent channels instead
of this flag.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:52:09 +03:00
Ilan Peer
4752147d88 nl80211: Report the number of concurrent support channels
Previously, drivers only reported if they support multiple concurrent
channels, but did not report the maximum number of supported channels.
Add this reporting to the driver capabilities and add the implementation
to driver_nl80211.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 19:49:47 +03:00
Antonio Quartulli
b21990b4bb nl80211: Register for AUTH frames when joining an IBSS network
In order to correctly handle IBSS/RSN, wpa_supplicant has to register
for any incoming Authentication frmae to properly react when those are
received.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:27:19 +03:00
Nicolas Cavallari
c91f796fb4 nl80211: Support not specifying the frame frequency
If the frequency is not specified the frame is now sent over
the channel used by the current BSS.

This will also log the payload of each sent CMD_FRAME.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
[antonio@open-mesh.com: commit message reworded]
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:24:50 +03:00
Mohammed Shafi Shajakhan
ed07764699 nl80211: Remove redundant assignment of ifindex
wpa_driver_nl80211_finish_drv_init() takes care of assigning
the interface index.

Signed-hostap: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
2013-07-21 13:20:27 +03:00
Sujith Manoharan
69dd2967db WDS: Fix WEP usage with nl80211 wds_sta=1
The static WEP keys have to be configured for the new VLAN
interface that is created for a 4addr WDS peer, not doing so
breaks WEP functionality in nl80211/4addr based WDS links.

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:41:22 +03:00
Michal Kazior
c8ebeda406 wpa_supplicant: Add support for VHT BSS membership selector
This allows wpa_supplicant to associate to an AP that has VHT BSS
membership selector set to indicate VHT support is required for the BSS.

Without the patch it was impossible to connect to, e.g., hostapd-based
AP that has require_vht=1. wpa_supplicant was complaining with:
  hardware does not support required rate 63.0 Mbps

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:28:42 +03:00
Jithu Jance
3f53c006c7 nl80211: Ignore disconnect event in case of locally generated request
Previously, there could be two disconnection events in core
wpa_supplicant when going through a case of wpa_supplicant-requested
disconnection with a driver that implements SME internally. This could
result in undesired behavior when a disconnection is followed by a new
connection attempt before the extra event has been received (e.g.,
during fast reassoc or WPS provisioning). Avoid such issues by ignoring
locally generated disconnect events after requesting cfg80211 to
disconnect.

This makes the previously used ignore_next_local_disconnect more
consistent by setting the variable within
wpa_driver_nl80211_disconnect() so that both callers get the same
behavior.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-07-20 16:06:13 +03:00
Jouni Malinen
54d4ba427c nl80211: Silence a compiler warning with older gcc versions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 12:54:47 +03:00
Jouni Malinen
851b0c5581 nl80211: Do not indicate P2P_DEVICE support by default
Since the P2P_DEVICE support indication was added to kernel before
everything was working properly, there may be kernel versions in use
with the new mechanism breaking P2P functionality (especially with
mac80211_hwsim). For now, disable P2P_DEVICE support by default and
allow it to be enabled with driver_param=p2p_device=1 in the
configuration file. This default behavior may be changed in the future
once the kernel issues has been resolved in stable releases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 10:50:13 +03:00
Arend van Spriel
7940c7902e nl80211: Use wdev id when cancelling wait for frame using P2P_DEVICE
Another function that needs the wdev id when P2P management is done
using the P2P_DEVICE interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
f608081c1d nl80211: Verify P2P GO/client address with all interface addresses
With P2P Device support there will be two interfaces with their
own MAC address. The P2P Interface Address must be unique so verify
it is.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
5fbcb45daf nl80211: Fix determining phy name for P2P Device
The phy name was determined using /sys/class/net/<ifname> but the P2P
Device is not listed there since it does not have an associated net
device. This patch changes name determination to obtain the name from
the wiphy information provide by nl80211.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
27ce1d64c4 nl80211: Fix nl80211_get_wiphy_index() for P2P Device
For P2P Device the netlink message should have wdev identifier
instead of the interface index. This fixes a failure which occurred
executing the P2P_GROUP_ADD command.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
ab7a1addf2 nl80211: Fix P2P group interface creating using P2P Device
When P2P Device is used as P2P management interface the creation of the
P2P group interface fails because MAC address retrieval fails for the
P2P Device interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:52:58 +03:00
Arend van Spriel
fa93de4059 nl80211: Use wdev_id in nl80211_create_iface_once()
For P2P an interface may be created for the P2P client/group. The
create request is done on the P2P management interface, which may
be a P2P Device interface. In that case it needs to use the wdev_id.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:51:59 +03:00
Arend van Spriel
fdc554b8ae nl80211: Use wdev id to obtain P2P Device scan results
In order to get a P2P-DEVICE-FOUND event the supplicant needs to
see a peer device during SEARCH and LISTEN phase. The SEARCH
phase does a scan so obtaining the scan results for the P2P Device
interface needs to be supported, i.e., use the wdev_id.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:51:14 +03:00
Arend van Spriel
597b94f5f4 nl80211: Add .get_mac_addr() callback for P2P Device
For P2P Device the MAC address is determined upon .init2(). The
wpa_s for this interface retrieves this address in
wpa_supplicant_update_mac_addr() using the .get_mac_addr() callback.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:50:21 +03:00
Arend van Spriel
8e12685c43 nl80211: Rework setting interface mode
The function setting the interface mode also handles management
frame subscription. Rework it so subscription is done for the
P2P Device interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:49:16 +03:00
Arend van Spriel
91724d6faa nl80211: Introduce i802_set_iface_flags()
The driver uses linux_set_iface_flags() in several places. Introduce and
use i802_set_iface_flags() which also works for P2P Device interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:48:03 +03:00
Arend van Spriel
eb4582f273 nl80211: Remove P2P Device interface upon .deinit()
The .deinit() closes netlink for P2P Device. Before doing that remove
the P2P Device interface that was created by wpa_supplicant.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:46:34 +03:00
Arend van Spriel
f632e483b1 nl80211: Fix P2P Device interface initialization
Couple of issues upon initializing a P2P Device interface needed
to be solved.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:44:54 +03:00
Arend van Spriel
e472e1b458 nl80211: Handle creation of P2P Device interface
Add specific handler for creating the P2P Device to store the wdev_id as
this type of interface does not have an interface index.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-25 13:41:55 +03:00
Johannes Berg
01517c8b30 nl80211: Allow Android P2P functionality
To support Android the kernel may have a "p2p0" netdev for a P2P Device
even though this isn't very useful, but Android requires a netdev. To
support this in the supplicant, if the interface mode is P2P_DEVICE,
re-set it to the same instead of STATION mode.

Note that this is only possible with a kernel that creates a
netdev for the P2P Device wdev.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-06-25 13:38:03 +03:00
David Spinadel
6bae92e0f2 nl80211: Add support for P2P Device in add interface
Don't try to assign ifindex for P2P Device interface.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2013-06-25 13:36:04 +03:00
David Spinadel
d6dcfcdaac nl80211: Add a handler to create_interface
Add an option to pass a handler to nl80211_create_iface() and
nl80211_create_interface_once() that will be called after receiving the
message from the kernel. This handler will add the option to process the
message in different ways for different interfaces.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2013-06-25 13:35:05 +03:00
David Spinadel
d3aaef8034 nl80211: Hold wdev identification for P2P Device
Add wdev_id to i802_bss. wdev_id_set indicates whether this id is
available. Use wdev_id if assigned, instead of ifindex. Use wdev_id for
events that come from the kernel to identify the relevant interface.
This commit does not assign wdev_id value for the BSS yet, i.e., this is
only preparation for the value to be used in a future commit.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2013-06-25 13:33:45 +03:00
Nirav Shah
7aad838c92 nl80211: Identify if nl80211 is capable of P2P Device abstraction
Check the supported interfaces attribute to identify support for
a dedicated P2P Device interface type. If set, update the driver
capabilities flag to notify the supplicant.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2013-06-25 13:29:48 +03:00
David Spinadel
6a71413ef2 nl80211: Rename is_p2p_interface
Rename is_p2p_interface() to is_p2p_net_interface() since it used to
identify network P2P interfaces to disable 802.11b rates on them.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2013-06-25 13:26:17 +03:00
Michael Braun
8393e1a024 nl80211: Print interface name on set_key()
Sometimes an interface name that cannot be resolved is given to the
set_key function, so print the ifname in addition to the ifidx.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-06-25 12:25:15 +03:00
Andrei Otcheretianski
9578329874 Add AVG_RSSI report in signal_poll
Add AVG_RSSI report to the signal_poll command if it is reported by
the kernel.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:01:05 +03:00
Andrei Otcheretianski
2cc8d8f4e8 Add bandwidth and center freq info to signal_poll
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 12:00:46 +03:00
David Spinadel
2090a0b42e nl80211: Add prints for kernel events
Add prints for kernel event, including the event ID and event string.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-06-22 11:12:48 +03:00
Jouni Malinen
e112764e6d nl80211: Use NL80211_ATTR_PEER_AID to set TDLS peer AID
This is needed for TDLS with VHT to allow partial AID to be set
correctly for the direct link frames. cfg80211 validation rules
prevented NL80211_ATTR_STA_AID from being used for this in set_station
case, so the new attribute is used instead.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-30 10:25:23 +03:00
Jouni Malinen
f8a5fd4243 Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-30 10:22:47 +03:00
Jouni Malinen
1ba51ec02b nl80211: Add debug print for set_supp_port operation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-27 20:32:54 +03:00
Jouni Malinen
add9b7a46a nl80211: Ignore deauth/disassoc event from old AP
It looks like cfg80211 can deliver a deauth/disassoc event during some
roaming cases while we are already in progress with a new
authentication/association. This happens at least with FT protocol.
Avoid issues with such disconnection event resulting in core
wpa_supplicant stopping the new connection attempt by tracking
auth/assoc BSSID more carefully within driver_nl80211.c and filtering
out events that do not apply for the current AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-27 20:10:57 +03:00
Vivek Natarajan
3c4ca36330 hostapd: Support MAC address based access control list
Enable MAC address based ACL for the drivers which advertise
this capabilty with NL80211_ATTR_MAC_ACL_MAX. Either of blacklist
or whitelist is supported, though, not simultaneously.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-05-24 13:26:35 +03:00
Jouni Malinen
1045ec36a3 nl80211: Add couple of additional iftypes to debug prints
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-21 16:51:06 +03:00
Jouni Malinen
ed496f131f P2P: Clean up debug prints
Replace direct wpa_msg() calls with p2p_dbg(), p2p_info(), and p2p_err()
calls that use a new debug_print() callback to handle actual debug
printing outside the P2P module.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:47:36 +03:00
Jouni Malinen
455299fb40 nl80211: Fix foreign address filtering for MLME frame events
Commit 97279d8d1a started filtering MLME
frame events based on Address 1 (destination) field. This works fine for
frames sent to us, but it did filter out some corner cases where we
actually want to process an event based on a frame sent by us. The main
such case is deauthentication or disassociation triggered by something
external to wpa_supplicant in the system. Fix this by accepting events
for frames where either Address 1 or 2 (transmitter) matches the
interface address.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-13 11:53:21 +03:00
Simon Wunderlich
695c70381f nl80211: Add driver_ops for stopping AP beaconing
This can be used to stop AP mode beaconing temporarily, e.g., in
response to a radar detected event.

This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:06:33 +03:00
Simon Wunderlich
f90e9c1c8b nl80211: Add driver_ops for starting radar detection
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:05:01 +03:00
Simon Wunderlich
fc96522eb9 nl80211: Add channel flags for DFS state information
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:02:57 +03:00
Simon Wunderlich
f295d0c86a nl80211: Add driver capability flag for radar detection
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 19:59:47 +03:00
Simon Wunderlich
04be54fa09 nl80211: Add driver events for radar detection
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 19:59:40 +03:00
Jouni Malinen
03565bc2d6 Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-06 15:59:49 +03:00
Jouni Malinen
f11b72c3e9 TDLS: Move AID=1 workaround into driver_nl80211.c
The use of AID=1 for the nl80211 dummy STA case is specific to the
driver (cfg80211), so better move this into the driver wrapper instead
of generic TDLS implementation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-06 15:57:03 +03:00
Jouni Malinen
048edb1070 Revert "nl80211: Add nla_put_u32() wrapper for Android"
This reverts commit df2f9ec6b2.

The current AOSP snapshot for JB includes nla_put_u32(), so this is not
needed anymore and is also causing linking issues due to duplicated
definition.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-04 20:19:43 +03:00
Ilan Peer
b691dcb129 nl80211: Fix max_remain_on_chan capability reading
In case that NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP is supported,
wiphy_info_handler() is called several times, where
NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION is present only in one
of these calls. Thus capa->max_remain_on_chan is overridden in
all other calls.

Fix it so the default value is set only after all the wiphy info was
received.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2013-05-04 11:28:54 +03:00
Jouni Malinen
b57b560034 wpa_supplicant: Default to nl80211 instead of wext
nl80211 has obsoleted WEXT as the preferred kernel interface for
controlling wireless drivers. Update wpa_supplicant driver interface
list order so that nl80211 gets used first if both nl80211 and wext
interfaces are included in the build. In addition, update README to
reflect the fact that WEXT is obsolete.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-29 16:55:44 +03:00
Jouni Malinen
5e24dc8a4b Add dup_binstr() to help common binary string tasks
There are quite a few places in the current implementation where a nul
terminated string is generated from binary data. Add a helper function
to simplify the code a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 23:44:59 +03:00
Jouni Malinen
e864c0aefe Use a common frequency to channel conversion function
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 22:11:51 +03:00
Jouni Malinen
97279d8d1a nl80211: Drop frame events that are for foreign address
This avoids duplicate processing of events when multiple BSSes are
configured.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-24 01:02:01 +03:00
Jouni Malinen
cc2ada868e nl80211: Reduce debug on Probe Request frames
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-04-24 01:01:21 +03:00
Johannes Berg
adc96dc2ad nl80211: Fix nla_nest_start conversion
Dmitry reported that the kernel could no longer parse the
scheduled scan attributes correctly after my patch to use
nla_nest_start/nla_nest_end. The reason is that the wrong
attribute is closed I accidentally made it close the full
scan config instead of just the SSID match set.

Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-04-23 17:19:20 +03:00
Johannes Berg
8cd6b7bce8 hostapd/wpa_s: Use driver's extended capabilities
Some extended capabilities (I'm currently interested in "Operating Mode
Notification" for VHT) are implemented by the kernel driver and exported
in nl80211. Use these in hostapd/wpa_supplicant.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-31 21:51:44 +03:00
Johannes Berg
8970bae806 nl80211: Use nla_nest_start/end instead of nla_put_nested
Instead of allocating a new message and then moving that into
the message being built, use nla_nest_start() and put the data
into the message directly.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-30 20:37:44 +02:00
Jouni Malinen
b92e08fc72 nl80211: Add debug prints for set_ap parameters
This makes it easier to see how exactly the driver is configured for AP
mode operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-21 15:40:25 +02:00
Johannes Berg
c30a4ab045 nl80211: Fix mode settings with split wiphy dump
When the wiphy information is split, there's no guarantee that the
channels are processed before the bitrates; in fact, with the current
kernel it happens the other way around. Therefore, the mode information
isn't set up correctly and there's no 11g mode.

Fix this by doing the 11b/11g determination as part of the
postprocessing.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-19 02:01:46 +02:00
Jouni Malinen
565110cd55 nl80211: Include interface name in more debug prints
This makes it easier to understand how scan operations and events occur
when multiple interfaces is being controlled by a single wpa_supplicant
process.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 16:05:24 +02:00
Bruno Randolf
65d52fc103 Add capability flag for IBSS and add get_capability modes
Add a driver capability flag for drivers which support IBSS mode and set
it for nl80211 drivers which have set the NL80211_IFTYPE_ADHOC.

Add a new option "modes" to "get_capability" which will return "AP" and
"IBSS" if the corresponding capability flags are set.

The idea is that this can be used for UIs to find out if the driver
supports IBSS mode.

Signed-hostap: Bruno Randolf <br1@einfach.org>
2013-03-16 12:42:15 +02:00
Deepthi Gowri
6a1ce39599 FT: Add support for IEEE 802.11r with driver-based SME
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the
WLAN driver. Add NL80211_CMD_FT_EVENT to send FT event from the
WLAN driver. This will carry the target AP's MAC address along
with the relevant Information Elements. This event is used to
report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).

Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:08:53 +02:00
Johannes Berg
e9ee8dc394 wpa_supplicant: Support VHT capability overrides
Add support for VHT capability overrides to allow testing connections
with a subset of the VHT capabilities that are actually supported by
the device. The only thing that isn't currently supported (by mac80211
and this code) is the RX/TX highest rate field.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 18:04:39 +02:00
Jouni Malinen
214a77b016 nl80211: Use helper function for phy_info_freqs()
This allows one level of indentation to be removed by using a helper
function to process each frequency.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:44:23 +02:00
Jouni Malinen
e62a1d43f9 nl80211: Split phy_info_band() into smaller helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:35:23 +02:00
Jouni Malinen
3cfcad1bb1 nl80211: Use helper function for phy_info_handler()
This allows one level of indentation to be removed by using a helper
function to process each wiphy band.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:17:18 +02:00
Jouni Malinen
5f43910727 nl80211: Split wiphy_info_handler() into smaller helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:05:55 +02:00
Dennis H Jensen
4324555222 nl80211: Support splitting wiphy information in dumps
This implements support for the new NL80211_ATTR_SPLIT_WIPHY_DUMP in
nl80211 to handle wiphy information that cannot fit in one message.

Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-hostap: Dennis H Jensen <dennis.h.jensen@siemens.com>
2013-03-10 13:22:43 +02:00
Jouni Malinen
3b365d4e9a Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 13:06:31 +02:00
Jouni Malinen
316a9e4d30 nl80211: Add debug print for cancel-frame-wait command
This makes it easier to interpret the logs for offloaded TX frame
operations.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-28 22:09:32 +02:00
Felix Fietkau
c3e3a5b90c nl80211: Fix WDS STA handling with multiple BSS interfaces
The MAC address of the AP VLAN needs to be the same as the BSS that the
STA belongs to.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2013-02-28 16:55:13 +02:00
Srinivasan B
bdaf17489a hostapd: Fix Max SP Length derivation from QoS Info
Hostapd provides QoS info of the STA (Service Period & AC mask) to the
kernel during wpa_driver_nl80211_sta_add call. Bit 5 and Bit 6 of QoS
info represents the Max SP length. Fix an issue in the code to fetch the
Max SP by shifting right the QoS info by value WMM_QOSINFO_STA_SP_SHIFT.
(operator ">" is replaced with ">>" operator).

Signed-off-by: Srinivasan <srinivasanb@posedge.com>
2013-02-16 11:15:13 +02:00
Sunil Dutt
122d16f25d nl80211: Configure STA Capabilities and Extended Capabilities
These are needed to allow drivers to implement all TDLS functionality
properly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-15 23:45:48 +02:00
Jouni Malinen
542e7c406d Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-15 23:45:02 +02:00
Sunil Dutt
d16531c40c TDLS: Pass peer's Capability and Ext Capability info during sta_add
The contents of the peer's capability and extended capability
information is required for the driver to perform TDLS P-UAPSD and Off
Channel operations. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:02:34 +02:00
Jouni Malinen
e4dea253b7 nl80211: Add debug prints for STA add/set operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-14 21:01:19 +02:00
Jouni Malinen
cd8db7c3ba Synchronize with wireless-testing.git include/uapi/linux/nl80211.h
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-14 21:00:56 +02:00
Jouni Malinen
c5f10e804a Use more accurate timestamps for scan results
For various P2P use cases, it is useful to have more accurate timestamp
for the peer information update. This commit improves scan result
handling by using a single timestamp that is taken immediately after
fetching the results from the driver and then using that value to
calculate the time when the driver last updated the BSS entry. In
addition, more debug information is added for P2P peer updates to be
able to clearly see how old information is being used here.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-12 19:14:32 +02:00
Vladimir Kondratiev
ff3ad3c531 Capability matching for 60 GHz band
On the DMG (60 GHz) band, capability bits defined differently from
non-DMG ones. Adjust capability matching to cover both cases.

Also, for non-DMG bands, check ESS bit is set.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2013-02-07 16:20:18 +02:00
Raja Mani
3140803b6d nl80211: Add ctrl_iface message for AP mode connection rejection
When AP mode operation reject the client, nl80211 layer advertises the
connect failed event with the reason for failures (for example, max
client reached, etc.) using NL80211_CMD_CONN_FAILED.

This patch adds some debug messages whenever such an event is received
from the nl80211 layer and also the same event is posted to the upper
layer via wpa_msg().

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
2013-02-07 15:24:53 +02:00
Mark Kettenis
5f7ae5e61c Add driver for OpenBSD net80211 layer
Very basic support for OpenBSD.  No support for scanning yet, so this needs
ap_scan=0 and expects that the user has configured the interface manually
using ifconfig(8).

Signed-hostap: Mark Kettenis <kettenis@openbsd.org>
2013-02-03 21:16:29 +02:00
Jouni Malinen
9ebce9c546 nl80211: Do not use void pointer for driver_ops used internally
This allows some more pointer type validation at compile time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 15:46:47 +02:00
Ben Greear
085b29f1fe hostapd: Fix crash when scan fails
When scan failed, the wpa_driver_nl80211_scan method tried
to recursively call itself, but it passed in the wrong argument
for the void*, and so then it crashed accessing bad memory.

With this fix, hostapd still will not retry the scan later, but
at least it will exit cleanly and won't polute the file system
with core files.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2013-02-03 13:51:54 +02:00
Jouni Malinen
8b706a99b8 nl80211: Add MFP information for NL80211_CMD_CONNECT
This was previously included only with NL80211_CMD_ASSOCIATE, but the
information is as useful (if not even more useful) for
NL80211_CMD_CONNECT. It should be noted that cfg80211 does not yet use
this attribute with NL80211_CMD_CONNECT, but that can be added easily.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-12 17:51:54 +02:00
Johannes Berg
05a8d4221d nl80211: Pass station VHT capabilities to kernel
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
a9a1d0f08a hostapd: Pass VHT capabilities to driver wrapper
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
89b800d726 nl80211: Support VHT configuration
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Jouni Malinen
ebeca8e3d1 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-12 17:51:52 +02:00
Johannes Berg
fa4763369a hostapd: Allow configuring driver to VHT
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Jouni Malinen
708bc8e0e4 nl80211: Restore previous nlmode if set_freq for AP mode fails
wpa_driver_nl80211_ap() returned error if set_freq failed, but left the
previously set nlmode to GO/AP. While this should not be issue for most
purposes, it leaves the interface in somewhat unexpected state and could
potentially affect operations prior to next connection attempt. Address
this by restoring the previous nlmode if AP mode cannot be started for
some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-08 00:34:08 +02:00
Baruch Siach
50d405ec87 atheros: Release sock_raw and reset appfilter on hapd_init failure
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-12-25 13:50:41 +02:00
Yoni Divinsky
3dfd0484fc P2P: Consider age for the P2P scan results
cfg80211 caches the scan results according the channel number. Due to
the 15 sec aging this might cause the user mode to see more than one
scan result with the same BSSID, e.g. - one scan result for the
P2P Device and one for the P2P GO (once it's enabled).

Fix this by updating the device entry only if the new peer entry is
newer than the one previously stored.

Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com>
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-hostap: Arik Nemtsov <arik@wizery.com>
2012-12-25 11:22:42 +02:00
Sven Eckelmann
a5e1eb2092 nl80211: Run TKIP countermeasures in correct hostapd_data context
hostapd can run with different VIF when using nl80211. Events about MIC
failures have to be processed in context of the VIF which received it
and not in context of the primary VIF. Otherwise the station belonging
to this VIF may not be found in the primary VIF station hash and
therefore no countermeasures are started or the countermeasures are
started for the wrong VIF.

Signed-hostap: Sven Eckelmann <sven@open-mesh.com>
Signed-hostap: Simon Wunderlich <simon@open-mesh.com>
2012-12-22 16:19:52 +02:00
Vladimir Kondratiev
7829894c21 Introduce 60 GHz band
Basic support for the 60 GHz band. Neither P2P nor WPS are yet taken
care off. Allows to start AP with very simple config:

network={
        ssid="test"
        mode=2
        frequency=60480
        key_mgmt=NONE
}

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-18 11:50:35 +02:00
Jouni Malinen
ad3872a372 WNM: Use CONFIG_WNM more consistently
Replace CONFIG_IEEE80211V with CONFIG_WNM to get more consistent build
options for WNM-Sleep Mode operations. Previously it was possible to
define CONFIG_IEEE80211V without CONFIG_WNM which would break the build.
In addition, IEEE 802.11v has been merged into IEEE Std 802.11-2012 and
WNM is a better term to use for this new functionality anyway.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-16 18:22:54 +02:00
Jouni Malinen
bd896433af nl80211: Register to process WNM-Sleep Mode Response frames
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:42:26 +02:00
Amitkumar Karwar
368b1957a6 Allow OBSS scan and 20/40 coex reports to non-SME drivers
We enable this feature for non-SME drivers as well if
they explicitly indicate need for it.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
2012-11-24 18:08:48 +02:00
Jouni Malinen
3d83a6b9b6 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 18:04:55 +02:00
Pontus Fuchs
fb660a9431 Do not double free cfg struct if netlink_init() fails
If netlink_init() fails on socket create or bind the cfg struct
provided as parameter is freed by netlink_init(). Callers of
netlink_init() also free this struct on their error paths leading
to double free.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2012-11-24 16:47:20 +02:00
Jouni Malinen
6201b052c8 nl80211: Add support for TDLS request event from the driver
The NL80211_CMD_TDLS_OPER command can be used as an event based on a
recent cfg80211 commit, so add code to map that to internal
wpa_supplicant event to request TDLS link setup/teardown.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-19 17:00:07 +02:00
Jouni Malinen
1ce0aa044c Remove unused disassociate() driver_ops
Commits 07783eaaa0 and
3da372fae8 removed the only users of the
disassociate() driver operation, so these driver wrapper functions can
also be removed now.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-15 00:06:12 +02:00
Jouni Malinen
9d7a63dc20 nl80211: Avoid strict-aliasing warning with gcc 4.7
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 20:28:27 +02:00
Christopher Wiley
a8c5b43ad3 nl80211: Roam correctly through cfg80211 without SME
Change the nl80211 driver in wpa_supplicant to correctly handle
connecting to a new AP through cfg80211 without SME capability. As
before, the driver will disconnect from the previously associated AP,
but now we attempt to immediately connect to our intended AP. This
prevents us from blacklisting the AP we were trying to connect to
because of a semantic mismatch between cfg80211 and wpa_supplicant. The
disconnect/connect patch generates a local disconnect nl80211 event
which we discard because we're already correctly tracking the pending
association request.

In detail:

cfg80211 does not support connecting to a new BSS while already
connected to another BSS, if the underlying driver doesn't support
separate authenticate and associate commands. wpa_supplicant is written
to expect that this is a supported operation, except for a little error
handling that disconnects from the current BSS when roaming fails and
relies on autoconnect logic to reconnect later. However, this failure to
connect is incorrectly attributed to the new AP we attempted to
associate with, rather than a local condition in cfg80211.

The combined effect of these two conditions is that full-mac drivers
accessible through cfg80211 but without SME capability take a long time
to roam across BSS's because wpa_supplicant will:
1) Fail to associate for local reasons
2) Disconnect and return that the association request failed
3) Blacklist the association target (incorrectly)
4) Do a scan
5) Pick a less desirable AP to associate with

Signed-hostap: Christoper Wiley <wiley@chromium.org>
2012-11-11 16:15:29 +02:00
Baruch Siach
b49019dd3d atheros: Remove redundant l2_packet_get_own_addr call
Commit deca6eff74 added a redundant call
to l2_packet_get_own_addr. Use the information we already have in
atheros_init.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-11-11 16:07:28 +02:00
Jouni Malinen
7d81932d27 nl80211: Make debug log more readable for driver events
Print the full name of the nl80211 event message in the debug log to
make it easier to parse the debug log.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-03 13:54:43 +02:00
Jouni Malinen
04a3e69dd1 P2P: Allow all channels with multi-channel concurrency
If the driver indicates support for multi-channel concurrency, change
the p2p_connect behavior to not force the current operating channel, but
instead, just mark it as preferred for GO Negotiation. This change
applies only for the case when the freq parameter is not used with the
p2p_connect command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-10-26 18:10:46 +03:00
Jouni Malinen
569fed9045 nl80211: Add support for SAE operations
This uses the recent cfg80211 changes to allow SAE authentication to be
implemented with the nl80211 driver interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-24 09:10:42 +03:00
Jouni Malinen
516059c753 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-24 09:08:38 +03:00
Vladimir Kondratiev
c097652828 60 GHz: Fix error while processing scan results
Channel frequency for 60 GHz band do not fit into 'short int', as was
used. Expand it to 'int'

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-10-04 16:32:23 +03:00
Jouni Malinen
369c8d7bcd Reserve AKM and cipher suite values
These values are used with WAPI and CCX and reserving the definitions
here reduces the number of merge conflicts with repositories that
include these functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 20:26:55 +03:00
Jouni Malinen
c10347f246 Add initial parts for SAE
This introduces new AKM for SAE and FT-SAE and adds the initial parts
for going through the SAE Authentication frame exchange. The actual SAE
algorithm and new fields in Authentication frames are not yet included
in this commit and will be added separately. This version is able to
complete a dummy authentication with the correct authentication
algorithm and transaction values to allow cfg80211/mac80211 drivers to
be tested (all the missing parts can be handled with
hostapd/wpa_supplicant changes).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 19:51:07 +03:00
Jouni Malinen
905029097c Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 10:49:46 +03:00
Mykyta Iziumtsev
817762d9c4 nl80211: Don't send BSSID with disconnect command
NL80211_CMD_DISCONNECT doesn't need BSSID, because cfg80211
uses locally saved value.

Signed-hostap: Mykyta Iziumtsev <mykyta.iziumtsev@gmail.com>
2012-09-29 19:01:50 +03:00
Felix Fietkau
73a3c6ffca nl80211: Use the monitor interface if socket tx status is not supported
Fixes hostapd on recent compat-wireless builds with older kernels.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-23 13:28:31 +03:00
Felix Fietkau
92d521d89c hostapd: Send EAPOL frames from the VO queue if WMM is active
This avoids extra latency caused by establishing an aggregation session
and makes the initial connection attempt more reliable

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-15 22:40:00 -07:00
Felix Fietkau
c34e618d47 hostapd: Fix WDS VLAN bridge handling
This patch fixes an issue where removing a WDS VLAN interface also
removed the main AP interface from the same bridge.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-15 22:38:14 -07:00
Baruch Siach
ac947e2a83 atheros: Fix RSN capabilities debug print
Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-09-05 19:01:11 +03:00
Jouni Malinen
d732463c47 nl80211: Register read_sta_data() handler for station only builds
This driver_op can now be used in station mode, too, to fetch
information about the connection with the AP, so allow this to be used
even if wpa_supplicant is built without AP mode support.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-05 17:07:03 +03:00
Yuhao Zheng
dc7785f845 wpa_supplicant: Add PKTCNT_POLL command to get TX/RX packet counters
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-09-05 17:02:02 +03:00
Jouni Malinen
eb7719ff22 Add support for using GCMP cipher from IEEE 802.11ad
This allows both hostapd and wpa_supplicant to be used to derive and
configure keys for GCMP. This is quite similar to CCMP key
configuration, but a different cipher suite and somewhat different rules
are used in cipher selection. It should be noted that GCMP is not
included in default parameters at least for now, so explicit
pairwise/group configuration is needed to enable it. This may change in
the future to allow GCMP to be selected automatically in cases where
CCMP could have been used.

This commit does not included changes to WPS or P2P to allow GCMP to be
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 11:52:15 +03:00
Wei-Jen Lin
e3e234fa35 nl80211: Set P2P multichan concurrency based on interface combinations
Use the NL80211_IFACE_COMB_NUM_CHANNELS value > 1 as a trigger for
enabling support for P2P multichannel channel concurrency. This does not
handle all possible details of enforcing driver capabilities, but it is
a good first step for allowing nl80211 drivers to enable multichannel
concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 19:31:58 +03:00
Jouni Malinen
1e05192eec test: Fix driver data pointer for the P2P commands
The driver_test.c data structures had been changed to use a separate
BSS structure, but the P2P commands were not using the new design.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-24 20:44:24 +03:00
Jouni Malinen
37448ede31 P2P: Add option for adding extra delay to p2p_find
A new optional delay=<search delay in milliseconds> parameter can now be
used with p2p_find command to request an extra delay between search
iterations. This can be used, e.g., to make p2p_find friendlier to
concurrent operations by avoiding it from taking 100% of the radio
resources.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 18:20:58 +03:00
Jouni Malinen
75227f3ada nl80211: Print an error if WDS STA interface cannot be set up
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:28:55 +03:00
Dan Williams
e7ecddf33a build: Use updated libnl3 header paths
libnl3's headers live in /usr/include/libnl3 for some time now.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2012-08-15 20:44:33 +03:00
Jouni Malinen
067ffa2696 Convert os_realloc() for an array to use os_realloc_array()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:21:23 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00
Michael Braun
03a6a2e972 Add option to use netlink to create and remove VLAN interfaces
CONFIG_VLAN_NETLINK=y build option can now be used to replace the
ioctl()-based interface for creating and removing VLAN interfaces
with netlink-based interface.

Signed-hostap: M. Braun <michael-dev@fami-braun.de>
2012-08-10 14:09:05 +03:00
Jouni Malinen
1d0c6fb1eb nl80211: Fix re-enabling of 802.11b rates after P2P use
Commit a11241fa11 removed the 802.11b rate
enabling/disabling code from wpa_driver_nl80211_set_mode() and while
doing that, removed the only place where drv->disabled_11b_rates was
set. Fix this by updating the flag in nl80211_disable_11b_rates(). In
addition, re-enable the 802.11b rates when changing to non-P2P mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 11:48:57 +03:00
Rajkumar Manoharan
edb9bfba89 nl80211: Disable 11b rates on configuring P2P interface
Right now 11b rates are masked out while creating a P2P interface,
but this is always failing as the interface is down. Most drivers
allow to configure rates only when the interface is UP and running.
So let us disable 11b rates when interface type is changed into a
P2P type and it is UP and running.

Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-10 11:35:33 +03:00
Jouni Malinen
d99619b243 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 11:21:16 +03:00
Jouni Malinen
df2f9ec6b2 nl80211: Add nla_put_u32() wrapper for Android
The system/core/libnl_2 re-implementation in AOSP does not include
nla_put_u32().

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-09 18:45:39 +03:00
Jouni Malinen
95ac3bf49f nl80211: Share common function for scan parameters
trigger_scan and start_sched_scan can share code for building the
common attributes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:48:52 +03:00
Jouni Malinen
f0494d0f95 nl80211: Check nla_put_nested() return value and handle errors
Couple of functions did not verify that nla_put_nested() succeeded. Fix
these by checking the return value and handling error cases cleanly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:27:55 +03:00
Jouni Malinen
6afbc3d698 nl80211: Fix netlink error paths in sched_scan() handler
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:11:08 +03:00
Ben Greear
addde1399e Better logging for ioctl set flags failure
Let user know if the call failed setting interface up vs. down.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-08-04 20:41:35 +03:00
Paul Stewart
21270bb4b3 Fix a couple memory leaks
Found using valgrind.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-04 20:10:08 +03:00
Xi Chen
c7673de462 atheros: Implement WNM-Sleep Mode driver operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:30 +03:00
Xi Chen
a884be9da1 WNM: Add placeholders for WNM driver commands and events
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:20 +03:00
Jay Katabathuni
ada8a5bd60 atheros: Add HS 2.0 Action frame TX/RX support
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:21:17 +03:00
Jay Katabathuni
e1e3b5bb34 atheros: Add support for Action frame TX/RX
This allows hostapd to send and receive various Action frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:11:59 +03:00
Mahesh Palivela
7d9c0cd345 Add support for using SA Query with drivers that implement MLME
This allows the SA Query mechanism in hostapd to be used with drivers
that implement authentication and association MLME/SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-01 13:11:56 +03:00
Jouni Malinen
e509167495 Add new drv_flag for indicating user space AP MLME
This makes it easier for hostapd to determine at runtime which
operations to use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-01 10:34:35 +03:00
Jouni Malinen
8342185012 HS 2.0: Add mechanism for disabling DGAF
disable_dgaf=1 in hostapd.conf can now be used to disable downstream
group-addressed forwarding (DGAF). In this configuration, a unique
GTK (and IGTK) is provided to each STA in the BSS to make sure the
keys do not match and no STA can forge group-addressed frames.

An additional mechanism in the AP needs to be provided to handle some
group-addressed frames, e.g., by converting DHCP packets to unicast
IEEE 802.11 frames regardless of their destination IP address and by
providing Proxy ARP functionality.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-30 18:23:52 +03:00
Thomas Pedersen
bf8d6d2430 nl80211: Support setting sched scan RSSI threshold
Allow the user to configure an RSSI threshold in dBm below which the
nl80211 driver won't report scan results. Currently only supported
during scheduled (PNO) scans.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-25 16:56:43 +03:00
Mahesh Palivela
990933fb1d nl80211: Save VHT capabilities from the driver
Save VHT capabilities coming through nl80211 within hostapd.

Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-07-04 21:42:56 +03:00
Jouni Malinen
80518c073b Sync with linux/nl80211.h from wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-04 21:40:31 +03:00
Jouni Malinen
0cb87fdeb5 Update license notification in driver_wired.c
This updates the license notification to use only the BSD license. The
changes were acknowledged by email (Gunter Burchardt, tmisu@gmx.de,
Mon, 02 Jul 2012 17:54:28 +0200).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 20:50:03 +03:00
Jouni Malinen
cb2b381169 Update license notification in roboswitch interface file
This updates the license notification to use only the BSD license. The
changes were acknowledged by email (Jouke Witteveen
<j.witteveen@gmail.com>, Mon, 2 Jul 2012 11:38:34 +0200).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 12:43:16 +03:00
Jouni Malinen
3df2f4fe99 P2P: Remove unused P2P_SCAN_SPECIFIC
This is not used anymore after the commit
e6ecfc4fd3.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-30 20:20:29 +03:00