Verify that the MAC Address KDE includes enough data to contain a MAC
address as a part of the parsing function so that each caller would not
need to verify this separately. None of the existing users of this
parser actually needed the MAC address value, so there was not any use
for the length field before. The updated design is more robust for
future uses and gets rid of that unused length field as well.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When an entry is added to the PTKSA cache, timer expiration is not set.
Check the list and set the timer expiration when the list is empty also.
When another entry is added to the list, it is placed before the relavant
entry in the order of expiry time of all entries present in the list.
Fixes: a4e3691616 ("WPA: Add PTKSA cache implementation")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
After the secure association and PTK derivation are completed, if the
device supports LTF keyseed, generate the LTF keyseed using KDK and set
the ranging context to the driver by using the command
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
AP as a responder, on successful completion of PASN authentication
configures the required keys by using the command
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT to the driver.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This defines the QCA vendor interface functions to offload PASN
authentication from the driver.
The driver sends the QCA_NL80211_VENDOR_SUBCMD_PASN event requesting to
perform PASN authentication with a list of peers with which the driver
needs to do ranging. wpa_supplicant performs PASN handshake with all the
peer devices and sets the required keys using the command
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT to the driver. After
PASN handshake is completed with all requested peers, wpa_supplicant
sends consolidated status for all peers to the driver.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Set secure ranging context to the driver for a valid PTKSA entry in the
PTKSA cache, if available. When the driver requests for PASN keys,
wpa_supplicant configures the keys from its cache if the keys for the
peer derived with the same own MAC address are available in the cache
instead of doing the full PASN handshake again.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
To support secure ranging with a random MAC address, PASN handshake is
performed with a different source MAC address from the device's own
interface address. Hence, allow PASN Authentication frames with any
foreign MAC address to further process the Authentication frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add an option for an alternative processing of PTKSA life time expiry.
Register a callback in wpa_supplicant to handle the life time expiry of
the keys in PTKSA cache. Send PASN deauthentication when a PTKSA cache
entry expires.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This brings in the functionality to hold multiple peers and perform PASN
authentication with each peer at a time and send the PASN response to
the driver. PASN parameters such as AKMP and cipher suite are obtained
from the BSS information of the cached scan results. Also add
functionality to trigger deauthentication to the peer for which PASN
request with action PASN_ACTION_DELETE_SECURE_RANGING_CONTEXT is
received.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This brings in the function declarations and data structures that are
required for handling PASN request from the driver, sending secure
ranging context and PASN response to the driver.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a function to derive the LTF keyseed from KDK. This function is
built only in case that CONFIG_PASN is enabled at build time.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The driver requests PASN authentication for a peer with a specified
source (own) MAC address. Use the specified own MAC address for PASN
operations. This is needed to allow random MAC addresses to be used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
On successful PASN handshake or 4-way handshake with a peer, PTK is
derived using the local and peer MAC addresses as input. Store the own
MAC address that is used for key derivation in PTKSA cache to maintain
that state over potential MAC addresses changes.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use separate capabilities for AP and STA modes for P802.11az security
parameters secure LTF support, secure RTT measurement exchange support,
and protection of range negotiation and measurement management frames
support.
P802.11az security parameters are considered to be supported for both
station and AP modes if the driver sets NL80211_EXT_FEATURE_SECURE_LTF,
NL80211_EXT_FEATURE_SECURE_RTT, and
NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE flags. The driver can
advertize capabilities specific to each mode using
QCA_WLAN_VENDOR_FEATURE_SECURE_LTF*,
QCA_WLAN_VENDOR_FEATURE_SECURE_RTT*, and
QCA_WLAN_VENDOR_FEATURE_PROT_RANGE_NEGO_AND_MEASURE* flags.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
With introduction of newer AKMs, there is a need to update the PMK
length plumbed for the driver based 4-way handshake. To support this,
the current update the PMK length to 48, if the key management type uses
SHA-384. This is needed, e.g., for SUITE-B-192.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
This fixes the build with OpenSSL 1.1.1:
../src/crypto/crypto_openssl.c: In function 'crypto_rsa_oaep_sha256_decrypt':
../src/crypto/crypto_openssl.c:4404:49: error: 'RSA_PKCS1_OAEP_PADDING' undeclared (first use in this function)
Signed-off-by: Andre Heider <a.heider@gmail.com>
If 6 GHz is supported by the device but 6 GHz P2P is disabled, P2P
invitation would fail if the GO select an operating channel which is not
the preferred channel. The root cause is that the 5 GHz and 6 GHz bands
are both HOSTAPD_MODE_IEEE80211A so the 5 GHz channels would be added
twice for the P2P Client's following scanning frequency list. This will
cause scanning to fail with -EINVAL. Fix this by adding the 5 GHz
channels only once.
Signed-off-by: Hector Jiang <jianghaitao@zeku.com>
According to the OCE specification, the STA shall select the AKM in
priority order from the list below.
1. FT Authentication over FILS (SHA-384) 00-0F-AC:17
2. FILS (SHA-384) 00-0F-AC:15
3. FT Authentication over FILS (SHA-256) 00-0F-AC:16
4. FILS (SHA-256) 00-0F-AC:14
5. FT Authentication using IEEE Std 802.1X (SHA-256) 00-0F-AC:3
6. Authentication using IEEE Std 802.1X (SHA-256) 00-0F-AC:5
7. Authentication using IEEE Std 802.1X 00-0F-AC:1
Move the FT-FILS-SHA256 check to be after the FILS-SHA384 one to match
this.
Signed-off-by: Seongsu Choi <seongsu.choi@samsung.com>
Data frame processing had already been extended to support additional
cipher suites, but Robust Management frame processing was still using a
hardcoded cipher suite (CCMP-128). Extend it to support GCMP-128,
GCMP-256, and CCMP-256 as well.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Reorder PKEX initiation function to send out the PKEX Exchange Request
frame at the end after all possible error cases have been checked. This
prevents Enrollee from seeing a PKEX frame when the session is about to
fail.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add QCA_NL80211_VENDOR_SUBCMD_GET_SAR_CAPABILITY to get various SAR
capabilities supported by the WLAN firmware to userspace. These
capabilites are usually reported by the firmware during the initial
bootup handshake with the driver. Based on these capabilities, user
space can choose proper SAR indexes.
Signed-off-by: Mukul Sharma <quic_mukul@quicinc.com>
Add support to configure SAE, PSK, and PSK-SHA256 AKMs in connect
request when driver's SME in use. This is needed for implementing
WPA3-Personal transition mode correctly with any driver that handles
roaming internally.
Send additional AKMs configured in network block to driver based on
the maximum number of AKMs allowed by driver in connect request. Keep
first AKM in the list AKMs in the connect request as AKM selected by
wpa_supplicant to maintain backwards compatibility.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Use the recently added attribute to determine whether the kernel
supports a larger number of AKM suites in various commands.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
4-way handshake was failing after the driver roam from SAE to WPA-PSK
due to wpa_sm having an old PMK which was generated during previous SAE
connection.
To fix this update PSK to wpa_sm when AKM changes from SAE to WPA-PSK
for the target AP to have a correct PMK for 4-way handshake. Also,
update PSK to the driver when key management offload is enabled.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
This brings in nl80211 definitions as of 2022-07-22. In addition, update
nl80211_command_to_string() to cover the new defined commands.
Signed-off-by: Jouni Malinen <j@w1.fi>
hostapd_dpp_add_controller() ended up trying to parse the IP address
without nul terminating it. This might work with some C libraries, but
not all. And anyway, this was already supposed to nul terminate the
string since a temporary copy is created of the constant string. Fix
this by adding the missed replacement of the space with nul.
Fixes: bfe3cfc382 ("DPP: Allow Relay connections to Controllers to be added and removed")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The part about checking the supported curves from the peer depends on
CONFIG_DPP3 and this test case needs to be skipped without that.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
u64 needs "long long unsigned int" on 32-bit, so print this using a
typecase value so that both 32 and 64-bit builds work fine.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This design was changed in the draft specification, so update
implementation to match the new design. Instead of including all
supported 2.4 and 5 GHz channels, generate the channel list using the
same mechanism that was already used for chirping.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Prepare for an implementation change for the PB discovery channel list.
Move the standlone (not an AP) PB Configurators to a preferred channel
and enable Configurator connectivity indication in APs that act as PB
Configurators.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This procedure will be used for PB discovery as well, so move the
frequency array generation into a helper function.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
EVP_PKEY_derive() might report a larger maximum size of the output than
HPKE_MAX_SHARED_SECRET_LEN under some conditions. That should be allowed
as long as the real final length is within the maximum limit.
Furthermore, since we are using a fixed length buffer for this, there is
no need to call EVP_PKEY_derive() twice to first learn the maximum
length. Use a bit longer buffer and allow OpenSSL to take care of the
update to the final length internally with than single call.
This showed up using the following test case sequence:
dbus_pkcs11 dpp_private_peer_introduction
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
dpp_discard_public_action=1 was not supposed to prevent network
introduction, i.e., it was only for frames that could go through the
DPP-over-TCP path. Fix this not to prevent network introduction when
using DPP-over-TCP to configure a DPP AKM profile.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
For now, do not include 6 GHz channels since finding a Configurator from
a large number of channels would take excessive amount of time.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This can be helpful for upper layers to be able to determine whether the
configuration was rejected.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Enhance QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH event for the
driver to indicate the information of the associated links of MLO
roaming.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Configurator station seems to be unable to get the first Authentication
Request frame transmitted through mac80211_hwsim for some reason. It is
not really clear why this happens and why it started happening now, but
as a temporary workaround, wait a second here since that seems to avoid
this for some unknown reason.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
sae.c depends on wpa_common.c now and as such, this test build needs to
pull in whatever is needed there and that happens to include sha1-prf.c.
Add that to the fuzzer to fix the build.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This test case assumed that the p2p_pref_chan 128:44 parameter would
have resulted in channel 44 (5220 MHz) being selected. That does not
work anymore since that channel was marked to require DFS/radar
detection in regdb. Fix the text case by changing to use another country
with rules that match the test case expectations.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It looks like some test cases could fail due to timeouts since the 10
second wait may not be sufficient to cover some cases where 6 GHz
channels get scanned. Increase the timeouts to avoid hitting such cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
