Add a test case 'eht_mld_cohosted_connectivity' which creates two 2 link
AP MLDs and connect a 2 link MLD client to each one of them and test
data traffic.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Add test cases to test basic cohosted MLDs functionality. Add helper
functions to create the configuration file, start hostapd instance.
Client connectivity test case will be added via a subsequent commit.
eht_mld_cohosted_discovery: 2 co-hosted MLDs without non-MLD RNR. Basic
bring up and beacon, MLD RNR, scan validation.
eht_mld_cohosted_discovery_with_rnr: Same like eht_mld_cohosted_discovery
but additionally non-MLD RNR (rnr=1) is also enabled. Validate the non-MLD
RNR as well.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
When AP is beaconing only on the 6 GHz band and unsol_bcast_presp
interval is set, AP sends unsolicited broadcast Probe Response frames
for in-band discovery. hostapd sent the Probe Response template for this
frame only when setting a new Beacon frame template.
Extend this to update the Probe Response template during BSS color
change.
Signed-off-by: Rathees Kumar R Chinannan <quic_rrchinan@quicinc.com>
When AP is beaconing only on the 6 GHz band and unsol_bcast_presp
interval is set, AP sends unsolicited broadcast Probe Response frames
for in-band discovery. hostapd sent the Probe Response template for this
frame only when setting a new Beacon frame template.
Extend this to update the Probe Response template during channel switch.
Signed-off-by: Rathees Kumar R Chinannan <quic_rrchinan@quicinc.com>
When AP is beaconing only on the 6 GHz band and unsol_bcast_presp
interval is set, AP sends unsolicited broadcast Probe Response frames
for in-band discovery. hostapd sent the Probe Response template for this
frame only when setting a new beacon.
As a preparation for extending this functionality to other cases, move
the generation of the unsolicited broadcast Probe Response template into
a more generic function and data structure.
Signed-off-by: Rathees Kumar R Chinannan <quic_rrchinan@quicinc.com>
This is needed to match the implementation change to map the 5 GHz
channels 149-175 to the global operating class 125 instead of 124.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
According to IEEE Std 802.11-2020, Operating classes Table E-2 (Europe)
and Table E-6 (China) map channels in the range 149 to 161 to the global
operating class 125, while Table E-1 (United States) maps these channels
to global operating classes 125 and 124 as well. The global operating
class 125 contains all channels from the global operating class 124 and
some additional channels.
Hence, to make the selection of the current operating class generic, use
operating class 125 for all 20 MHz channels in the range 149 to 161.
Signed-off-by: Amith A <quic_amitajit@quicinc.com>
If a non-PSC 6 GHz channel with bandwidth higher than 20 MHz is
configured, duplicate beacons/FD/UBPR will be transmitted in other 20
MHz channels of the current configured bandwidth to aid in faster scan.
In such cases the duplicate FD needs to carry the Operating Class and
Primary Channel subfields for non-AP STAs to identify the primary
non-PSC.
IEEE Std 802.11-2020, 9.6.7.36 (FILS Discovery frame format):
"The Operating Class subfield specifies the operating class of the
Primary Channel of the transmitting AP (see 9.4.1.36).
The Primary Channel subfield is set to the channel number of the primary
channel (see 11.15.2) if the FILS Discovery frame is transmitted as a
non-HT duplicate PPDU; otherwise, the subfield is not present."
Hence, add the Operating Class and Primary Channel subfields if the
current channel is non-PSC and the channel bandwidth is 40 MHz or
higher.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
There is a chance that the driver has switched the channel width so we
should update the bandwidth, too, when receiving a channel switch event.
Otherwise, this may cause out of sync for bandwidth between i802_link
and hostapd_config.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
If not set, 0 is set by default and this could fail in the following
code path when link ID is not matching:
hostapd_drv_set_ap -> wpa_driver_nl80211_set_ap -> nl80211_set_channel
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Add a new QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_AP_SUSPEND to
allow suspend and resume the AP interface. When an AP is suspended, it
disconnects all connected clients and stops all TX/RX operations on the
AP interface. The driver retains the AP configuration and on resume, all
AP operations are resumed with the same configuration.
This subcommand is also used in the event path to notify userspace about
AP suspended or resumed state changes.
This uses attributes defined in enum qca_wlan_vendor_attr_ap_suspend.
Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
Wait for both peers to be connected before checking MESH_LINK_PROBE
behavior. Without this, it was possible for a MESH_LINK_PROBE command to
be issues before the specific peer had been added and that would result
in the nl80211 command failing.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This test case ended up dropping HT capability on channel switch which
is now resulting in mac80211 disconnecting. Avoid this by leaving HT
enabled. In addition, check the P2P Client events explicitly.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Previously, MLO Link KDE was added only for each link that was
negotiated for the ML association. However, IEEE Std 802.11be/D5.0,
12.7.6.1 defines the MLO Link KDE to be included "for each affiliated
AP" which is not constrained by what the non-AP MLD might have requested
or what the negotiation outcome for this particular ML association is.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
There is no need to store the AP MLD's RSNE/RSNXE within per-supplicant
data structure in struct wpa_state_machine since those elements are
available from the generic authenticator data in struct
wpa_authenticator.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
There is no need to store the AP MLD's link MAC addresses within
per-supplicant data structure in struct wpa_state_machine since those
MAC addresses are available from the generic authenticator data in
struct wpa_authenticator.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
There is no need to store the AP MLD MAC address within per-supplicant
data structure in struct wpa_state_machine since that MLD MAC address is
available from the generic authenticator data in struct
wpa_authenticator.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add QCA_ROAMING_MODE_AGGRESSIVE in enum qca_roaming_policy to set
aggressive roaming mode. In addition, document the existing enum values.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When the RADIUS response included a Session-Timeout attribute, but is
otherwise valid (an Access-Accept with a valid Tunnel-Password), the
association still failed due to the strict comparison of the accepted
value with HOSTAPD_ACL_ACCEPT. Apparently this combination wasn't
previously tested.
Extend this to allow a packet containing a valid Session-Timeout
attribute to be accepted by extending the "success" comparison to
include HOSTAPD_ACL_ACCEPT_TIMEOUT.
Fixes: 1c3438fec4 ("RADIUS ACL/PSK check during 4-way handshake")
Signed-off-by: Lee Harding <somerandomstring@gmail.com>
Make the channel switch complete event, WPA_EVENT_CHANNEL_SWITCH,
accessible to the action script.
Signed-off-by: arun.jose <arun.jose.wg@bp.renesas.com>
Hardcoded conversion for 5 GHz band was used, but this won't work for
other cases. Set the correct center segment indexes in channel switch
fallback for non-5GHz band.
Signed-off-by: Jurijs Soloveckis <jsoloveckis@maxlinear.com>
If the TX success response races with the RX frame then the state
machine was simply move to P2P_SD_DURING_FIND to continue the operation.
However, this does not take into account broadcast queries where the
callback handler updates the peer's sd_pending_bcast_queries.
Fix this by exporting the callback and calling it directly. This is
fine, as the operation is cancelled immediately afterwards, ensuring
that the callback is not called a second time.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
D-Bus expects "persistent" to be a bool (0/1) and crashes otherwise.
Since persistent may also be 2 convert it to boolean.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
In case the channel map was updated to include the 6 GHz but these channels
were not scanned yet, do not allow fast associate.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
If one sends a Probe Request frame to a non-TX BSSID, no AP MLD ID
should be included in the request. Permit mld_id to be -1 so that it is
not a required argument and can be left out.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
When the authentication is an MLD authentication need to use the AP MLD
MAC address when requesting the driver to deauthenticate.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
In case of failure handling an Authentication frame from the AP MLD,
clear the MLD state only after the deauthentication is done. This allows
deauthentication process to use the AP MLD MAC address.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
If parsing the basic ML element in the Authenticate frame fails,
instead of only disassociating, completely deauthenticate so all
state machines would be in a consistent state.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
When considering to roam to a different BSS and the connection
is an MLD connection, do not roam to a BSS which is already
included in the MLD connection.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
When a BSS is removed, the flow continues without actually
waiting for the AP to be stopped. This is racy in flows that
actually expect the AP to be stopped, e.g., test_ap_bss_add_remove().
Try to mitigate such cases by adding a short sleep after the
AP is removed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
wpa_s->connect_without_scan could have been left pointing to invalid
network when a network profile was removed. It seems to be possible for
this to happen in some hwsim test case scenarios under specific timing,
but the exact reason for this is not clear. In any case, this pointer
needs to be cleared.
Signed-off-by: Jouni Malinen <j@w1.fi>
This is needed to avoid unexpected behavior if a previously executed
test case has left a BSS entry with Interworking emabled into the case.
Signed-off-by: Jouni Malinen <j@w1.fi>
The functions that determine the length of the RNR information and that
build the actual RNR need to use the same conditions for skipping BSSs.
Use a shared helper function for this to avoid having to maintain two
copies of the same implementation and the risking those getting out of
sync.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
RNR formation for co-location or MLO did not work as expected. Fix this.
For example, during co-location, if the BSS is also its ML partner
there is no need to include a separate TBTT for it.
Also, during co-location, if the BSS is not its partner but it is ML
capable, the TBTT length should be 16 bytes and it should include the
MLD Parameters for it in the RNR.
During co-location, for a given Neighbor AP (operating on a given
channel and op-class) if it has BSSs which are ML capable as well as
BSSs which are not, there should be two Neighbor AP Info present: one
indicating TBTT length as 13 bytes and one indicating TBTT info length
as 16 bytes.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Include link ID and partner link details in the STATUS command output
for AP MLDs.
The details would be seen as below for an AP MLD interface:
$ hostapd_cli -i wlan0 status | grep link
num_links=1
link_id=0
link_addr=AA:BB:CC:DD:EE:FF
$ hostapd_cli -i wlan1 status | grep link
num_links=2
link_id=0
link_addr=AA:BB:CC:DD:EE:FF
partner_link[1]=AA:BB:CC:DD:EE:AA
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Co-developed-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Whenever a BSS was set up,hostapd flushed all stations via the flush()
driver operation which maps to NL80211_CMD_DEL_STATION in the nl80211
interface. However, in case of MLO, a station could have been connected
to other links by the time this link is coming up. Since link ID was not
passed to flush(), all those stations entries were also removed in the
driver which is wrong.
Include the link ID along with the command in AP MLD so that the driver
can use this link ID and flush only the stations that use the passed
link ID as one of their links.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
This is needed for MLO group rekeying.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Group rekeying was not supported for ML stations when non-association
link initiates a group rekey. Support this by arming the group key rekey
timer on one of the affiliated links and whenever this timer fires,
rekey group keys on all the affiliated links.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Calculate links specific MLO GTK/IGTK/BIGTK KDE lengths based on
corresponding cipher and key instead of taking length of one link and
multiplying it by no of associated links. This is needed since the group
ciphers might be different between the affiliated links.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
This makes it easier to extend the design for MLO group rekeying.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Make the code more readable by using a define for the PN length to avoid
potential confusion of this 6 octet length with the MAC address length.
In addition, Use ETH_ALEN more consistently for the latter.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add required ML specific members in struct wpa_authenticator and struct
wpa_state_machine to maintain self and partner link information.
Maintain state machine object in all associated link stations and
destroy/remove references from the same whenever link stations are
getting removed.
Increase the wpa_group object reference count for all links in which ML
station is getting associated and release the same whenever link
stations are getting removed.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
All links were iterated over during processing ML info in Association
Request frame. However, the association link info will not be present in
the ML info and hence the following debug print is observed during ML
association (assoc link is 1):
MLD: No link match for link_id=1
Skip processing for the association link to avoid this.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
