Whenever a BSS was set up,hostapd flushed all stations via the flush()
driver operation which maps to NL80211_CMD_DEL_STATION in the nl80211
interface. However, in case of MLO, a station could have been connected
to other links by the time this link is coming up. Since link ID was not
passed to flush(), all those stations entries were also removed in the
driver which is wrong.
Include the link ID along with the command in AP MLD so that the driver
can use this link ID and flush only the stations that use the passed
link ID as one of their links.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
This is needed for MLO group rekeying.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Group rekeying was not supported for ML stations when non-association
link initiates a group rekey. Support this by arming the group key rekey
timer on one of the affiliated links and whenever this timer fires,
rekey group keys on all the affiliated links.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Calculate links specific MLO GTK/IGTK/BIGTK KDE lengths based on
corresponding cipher and key instead of taking length of one link and
multiplying it by no of associated links. This is needed since the group
ciphers might be different between the affiliated links.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
This makes it easier to extend the design for MLO group rekeying.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Co-developed-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Make the code more readable by using a define for the PN length to avoid
potential confusion of this 6 octet length with the MAC address length.
In addition, Use ETH_ALEN more consistently for the latter.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add required ML specific members in struct wpa_authenticator and struct
wpa_state_machine to maintain self and partner link information.
Maintain state machine object in all associated link stations and
destroy/remove references from the same whenever link stations are
getting removed.
Increase the wpa_group object reference count for all links in which ML
station is getting associated and release the same whenever link
stations are getting removed.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
All links were iterated over during processing ML info in Association
Request frame. However, the association link info will not be present in
the ML info and hence the following debug print is observed during ML
association (assoc link is 1):
MLD: No link match for link_id=1
Skip processing for the association link to avoid this.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Whenever there is a beacon update for any one of the affiliated link,
all the other partner links' beacon should be refreshed.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Add link ID support into EAPOL RX handler so that the events can
be routed to the appropriate link BSSs.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Add link ID support into EAPOL TX status handler so that the events can
be routed to the appropriate link BSSs.
Check each BSS's other partner link BSS STA list as well in
hostapd_find_by_sta() to support this.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
hostapd_eapol_tx_status() function is used only in drv_callbacks.c.
However, it is defined in ieee802_11.c which is not really the correct
place for it.
Hence, move the function into drv_callbacks.c and make it static.
No functionality changes.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Control port TX status events were handled on drv's first BSS
only. However, to support multiple MLDs there is requirement to handle
this on a given BSS.
Use the passed BSS instead of always going with drv's first BSS.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Management frame TX status events were handled on drv's first BSS
only. However, to support multiple MLDs there is requirement to handle
this on a given BSS.
Use the passed BSS instead of always going with drv's first BSS.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Pass ctx in mlme_event_mgmt(). This will help in routing the event
properly to the link BSS.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
The get_hapd_bssid() function matched the given BSSID in all BSSs of its
own interface. However with MLO, there is requirement to check its own
partner BSS at least.
Compare the BSS's link partners as well and if the specified link ID
matches the link ID of the partner, return the BSS.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Modify necessary helper functions to support multiple BSS support for
MLO to make the changes scalable.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
AP MLD was added with an assumption of only a single BSS per link in the
hostapd configuration. This needs to be extended when a cohosted ML BSS
exist in the same configuration.
Extend the support for cohosted BSSs. This is required for MBSSID MLO
support as well.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Authenticator state machine ML info was set only when it was created.
However, if the association is tried again, the state machine will
already exist and hence the ML info will not be refreshed. This leads to
an issue where if in the subsequent association request, the MLD info is
different than the old info, validation of it will fail.
Fix this issue by refreshing the authenticator state machine's ML info
every time association request is handled.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
This became unused, so remove the argument from this function, all its
callers, and from places that became unused with these changes.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The nl80211 driver interface function mlme_event_mgmt_tx_status(),
filled in link_id only if the frame was the last transmitted on the
whole drv (driver) level. With co-hosted MLDs, there could be cases
where multiple frames are sent out by various interfaces (BSS) under the
same drv. Now while handling the TX status, only one interface will get
the proper link_id. Rest will get -1 and the event will be routed to the
first BSS always. If the frame was not sent from the first BSS this
leads to possibility of the frame getting dropped.
Hence to make the underlying link identification easier, modify
authentication and association frames to be always sent with the link
address as A1 and A3 for ease of TX status handling.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
The changes in nl80211 to get rid of the libnl3-route dependency are not
sufficient to fully remove the depency from other parts of the code.
Revert the makefile related changes from that commit to avoid build
issues for cases where CONFIG_FULL_DYNAMIC_VLAN=y and
CONFIG_VLAN_NETLINK=y are used without CONFIG_DRIVER_MACSEC_LINUX=y
pulling in the needed library.
Fixes: a210fdb1c7 ("nl80211: Rewrite neigh code to not depend on libnl3-route")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Introduce an attribute QCA_WLAN_VENDOR_ATTR_CONFIG_KEEP_ALIVE_INTERVAL
in QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION to configure
station's keep-alive interval to the driver/firmware. This can be used
to resolve kickout issues from APs which kick out STAs before the BSS
maximum idle period expires.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a QCA vendor command for registering NL80211_CMD_GET_STATION
response as a unicast event when there is a NL80211_CMD_GET_STATION
request from any userspace module.
The driver will send the unicast events with the same netlink port ID
which is used by userspace application for sending the registration
command. If multiple registration commands are received with different
netlink port IDs, the driver will send unicast event with each netlink
port ID separately.
Userspace application can deregister the unicast events with disable
configuration. The registrations will be removed automatically by the
driver when the corresponding netlink socket is closed.
This will help avoid multiple NL80211_CMD_GET_STATION requests from
different userspace applications in short span. The userspace
application which registers for the unicast event can avoid sending
NL80211_CMD_GET_STATION request again if the response is available with
a recently received unicast event.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add support for TWT responder for AP operating in HT and VHT modes by
introducing a new configuration parameter ht_vht_twt_responder. When
this is enabled, TWT responder mode support in HT and VHT modes is
enabled if the driver supports this and is disabled otherwise.
Signed-off-by: Manaswini Paluri<quic_mpaluri@quicinc.com>
Add a feature flag to indicate driver support for TWT responder for AP
operating in HT and VHT modes.
Signed-off-by: Manaswini Paluri<quic_mpaluri@quicinc.com>
i802_sta_deauth() already has the link_id passed to it in its arguments.
Use that to pass it down to send MLME handler as well.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Function nl80211_link_add() created the link add netlink message on drv
basis which in turn always uses the drv's first BSS. To support link add
for various other interfaces, use the per-BSS function to create the
netlink message.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
for_each_mld_link() macro used three nested for loops. Since now the
affliated links are linked together via a linked list, the logic can be
improved by using dl_list_for_each() macro instead which uses one for
loop.
Modify for_each_mld_link() macro to use dl_list_for_each() instead.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Add support for additional (vendor) elements to be added
to only Probe Response frames, for testing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the build path is long, the contents of the _DIRS variable can be
very long, since it repeats the same directories very often. In some
cases, this has triggered an "Argument list too long" build error.
Reported-by: Robert Marko <robimarko@gmail.com>
Suggested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If authentication fails repeatedly, e.g., because of a weak signal, the
link can end up in blocked state. If one of the nodes tries to establish
a link again before it is unblocked on the other side, it will block the
link to that other side. The same happens on the other side when it
unblocks the link. In that scenario, the link never recovers on its own.
To fix this, allow restarting authentication even if the link is in
blocked state, but don't initiate the attempt until the blocked period
is over. This reverts commit 09d96de09e ("mesh: Drop Authentication
frames from BLOCKED STA").
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This fixes a segmentation fault on STA disconnect in case IPv6 addresses
where learned for the STA based on snooped neighbor solicication.
Fixes: bd00c4311c ("AP: Add Neighbor Discovery snooping mechanism for Proxy ARP")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
RRM link measurement request/report management frames are used to get
the radio link information between the connected stations.
Add new hostapd_cli command req_link_measurement to send an RRM link
measurement request to an associated station. Add support to handle the
link measurement report in hostapd.
RRM link measurement support can be enabled with the following new
configuration parameter:
rrm_link_measurement_report=1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com>
The DTIM information in the per-STA profile is set incorrectly. The DTIM
period is set in the LSB octet of the DTIM Info subfield (2 octets),
which is intended for the DTIM count.
Fix this by setting the DTIM period and DTIM count information properly
to the MSB and LSB octets of the DTIM Info subfield, respectively.
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
When we are configuring automatic channel selection, we are not able to
switch to a given DFS channel because when we are trying to move to a
DFS channel, the interface is disabled and enabled again. When the
interface is disabled and enabled we are setting iface's freq and
channel to 0 in setup_interface2() in case ACS is enabled, and now we
don't know to which channel we were trying to move. Now ACS will run and
the interface will be up in the channel that is suitable.
To fix this issue add a flag named is_ch_switch_dfs to check if the
channel switch request is for a DFS channel and we can use this in
setup_interface2() to decide whther we have to set iface's freq and
channel to 0 or not. This way iface's freq and channel will retain the
values while channel switching to a DFS channel when ACS is enabled.
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Add a new flag radar_detected which is used in the following cases
when setting up a link on a DFS channel while the interface is not yet
enabled:
1. DFS link received CAC start event
2. If no radar detected, link setup succeeeds after CAC end
event is received. Else go to 3.
3. Radar detected on this link -> set radar_detected bit
4. CAC end received for the current freq -> Do not setup interface
as radar already detected. Clear radar_detected bit.
5. The driver sends channel switch event to switch to another channel
a. Switch to another DFS channel -> go to 1
b. Switch to non-DFS channel -> proceed to set up interface
Or when receiving a CAC start event when the interface is already set up:
1. DFS link already set up successfully
2. Radar detected on this link -> set radar_detected bit
a. Switch to DFS channel
a.1. CAC start -> clear radar_detected bit and partner RNR
a.2. If radar detected, go to 2.
a.3. CAC end -> clear radar_detected bit
a.4. Link enabled successfully
b. Switch to non-DFS channel
b.1 No op and the driver handles this
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
When one link is still under CAC or disabled, peer links should not
carry the information of this link in the RNR elements.
With this change, the RNR element will be included only if a peer link
is in HAPD_IFACE_ENABLED state.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Link ID is more accurate to specify the BSS for a radar event in some
corner cases, e.g., when there is a radar detection event and the driver
then switches to another DFS channel. There will then be two events
coming from the driver (CAC start and channel switch complete). In case
the CAC-start event comes first, hostapd still stores the previous
frequency and cannot find the correct link by calling
nl80211_get_mld_link_by_freq() with the new frequency.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
The AP MLD case missed the "else" branch which handles legacy STA's
disassociation. So this STA's sta_info will not be cleared ever.
Add the "else" check to make sure the sta_info gets cleared.
Fixes: 7ceafb6e9f ("AP MLD: Handle disassociation notification with SME offload to driver")
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
OBSS scan can be required in different links if operating as an AP MLD.
When triggering scan, specify the link ID for the driver to find the
correct link to scan.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
If the driver provides an identifying cookie value for scan operations,
use that to select which link processes the scan result. This is needed
for OBSS scans that can be required in different links if operating as
an AP MLD. Distinguish the scans using scan_cookie for QCA vendor scan
events.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
In AP MLD case, HT scan results need to be handled in the link that
triggered this scan. So find the link that has a valid scan_cb to handle
EVENT_SCAN_RESULTS.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Modules that use libpasn for PASN authentication need the context of
PASN data. PASN data is a common context for the library and the modules
using it. Hence, initialize the context through init and deinit
functions. Also use set and get functions to update the parameters.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
PMKSA cache API is included in libpasn.so used by external modules,
e.g., Wi-Fi Aware. To avoid dependency on IEEE8021X_EAPOL define for the
external modules at compile time, remove PMKSA cache static inline
functions from the header file and add wrapper function stubs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
PTKSA cache API is included in libpasn.so used by external modules,
e.g., Wi-Fi Aware. To avoid dependency on CONFIG_PTKSA_CACHE define for
the external modules at compile time, remove PTKSA cache static inline
functions from the header file and add wrapper function stubs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add the Extended Capabilities element for a non-TX BSS into the non-TX
BSSID profile subelement in the Multiple BSSID element if the non-TX BSS
has different extended capabilities than the TX BSS.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new attribute QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_IFINDEX
for QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT subcommand to
apply rules for avoid frequencies on a specific netdev. This is a
32-bit unsigned optional attribute.
Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
This reverts commit bffd2b3994.
Revert this commit to fix a regression when setting up P2P Group Owner
on some old device.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The OpenSSL 3.0 (or newer) version of omac1_aes_vector() did not free
the EVP_MAC. This resulted in a memory leak that shows up in a bit
strange way in valgrind reports and because of that, was not caught
during automated testing.
Fixes: 0c61f6234f ("OpenSSL: Implement CMAC using the EVP_MAC API")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The first link BSS was always disabled last. However, now the first BSS
can be dynamically adjusted. Hence, remove such restriction.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Whenever ap_free_sta() was called, it deleted the whole station entry
from the kernel as well. However, with MLD stations, there is a
requirement to delete only the link station.
Add support to remove the link station alone from an MLD station. If the
link going to be removed is the association link, the whole station
entry will be removed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
When the first link BSS of an interface was de-initialized/disabled, the
whole MLD was brought down. All other links were stopped beaconing and
links were removed. And if the non-first link BSS was
de-initialized/disabled, nothing happened. Even beaconing was not
stopped which is wrong.
Fix this by properly bringing down the intended link alone from the
interface.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Previously, hostapd directly advertised the MLD capabilities received
from the driver. Since this information is exchanged during
initialization time only, the driver will advertise the maximum
supported values. hostapd should parse it and then based on the current
situation fill the values accordingly.
For example, the maximum number of simultaneous links is supposed to be
a value between 0 and 14, which is the number of affiliated APs minus 1.
The driver advertises this value as 5 and hostapd, irrespective of the
current active links, puts 5 in the frames.
Fix this by parsing the value from the driver capabilities and then
using the values as per the current situation of the links. The
advertised values will be used as the upper limit.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
If one or more BSS from the interface is partnering with BSSs from
another interface and if this interface gets disabled, the Beacon frames
need to be refreshed for other interfaces. Similar thing should happen
when it gets enabled.
Add logic to refresh other interface Beacon frames when one of the
interfaces is disabled or enabled.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Previously, whenever if_remove() was called, the whole interface was
deleted. In an AP MLD, all partner BSS use the same driver private
context and hence removing the interface when only one of the links goes
down should be avoided.
Add a helper function to remove a link first whenever if_remove() is
called. Later while handling it, if the number of active links goes to
0, if_remove() would be called to clean up the interface.
This helper function will be used later when co-hosted AP MLD support is
added and as well later during ML reconfiguration support.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
When the interface was removed, the added links were not removed. While
removing the interface, kernel has removed the stale links but hostapd
has not. This is wrong since hostapd should remove and do the clean ups
properly while removing the interface.
Hence, remove the links when interface is removed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Construct the nl80211 remove link command using the per-BSS approach
instead of per-driver (drv->first_bss).
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
nl80211_remove_links() iterated over all active links in the given BSS
and removed all of them. However, at times it is required to remove only
one link and not all links.
Add a helper function nl80211_remove_link() which will remove just the
given link_id from the passed BSS. nl80211_remove_links() will use this
and will call this for each of the active links to be removed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
wpa_driver_nl80211_set_ap() called nl80211_put_freq_params() twice if AP
is an AP MLD. It called once while putting the MLO link ID and the other
time in the normal flow if frequency info is present. Doing this twice
is not required.
Call put_freq once during the normal flow only and separately of that,
add the link ID for AP MLD.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
This call was added within a conditional CONFIG_IEEE80211AX block even
though this can apply without that build option. Move this outside that
conditional block.
Fixes: b3921db426 ("nl80211: Add frequency info in start AP command")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Cache the corresponding hostapd_data struct context into the link entry
within the driver wrapper. This will be useful for driver events
callback processing.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Currently, whenever a new BSS is created, if it is an EHT BSS it is tied
to a corresponding MLD structure. If the structure does not exist
already, a new one is created and tied to it. Accordingly, the link ID
is assigned as well. However, when the BSS is deleted, the MLD structure
is not freed and when it is again created the next time, the link ID is
incremented further and the BSS gets a wrong link ID.
For example, 2.4 GHz single link AP MLD case: First ADD, link ID 0 would
be assigned and MLD interface wlan0 would be created. When REMOVE is
issued, the BSS would be deleted but MLD wlan0 will not. When ADD is
issued again, the BSS will tie back to MLD wlan0 but this time the link
ID will be incremented again and 1 would be assigned. Hence, at
subsequent REMOVE/ADD, the link ID keeps on incrementing.
Since the link ID remains same for the full lifetime of the BSS and MLD,
the next link ID counter cannot be just reset back to 0 when a BSS is
deleted. Otherwise, in interleaved link enable/disable case, the link ID
would be changed.
To overcome this situation, whenever a BSS is deleted, if the MLD is not
referenced by any other existing BSS, delete the MLD structure itself.
To know how many BSSs are referring a given MLD, introduce a new member
refcount in MLD. If the value is 0 it is safe to delete the MLD.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link ID was assigned when BSS is going through setup and the driver
interface init. Later if interface is disabled and enabled again, setup
BSS is called which will give a new link ID to it. However, Link ID
should be same for a BSS affliated to an AP MLD for the full lifetime of
the BSS.
Hence, assign the link ID during BSS creation itself. And it will remain
until BSS entry is completely freed. Hence, link ID will not change as
part of disable/enable.
Also, since link ID would be decided now, it will help in creating link
level control sockets in a subsequent patch.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
MLD level structure is present to store the MLD level information.
Add changes to use the MLD structure instead of link specific struct
hostapd_data to get/set the MLD level information.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
MLD level information like MLD MAC address, next link ID, etc. was
stored in each BSS. However, only the first link BSS assigns values to
these members and the other link BSSs store references to the first BSS.
However, if the first BSS is disabled, the first BSS reference in all
BSS should be updated which is an overhead. Also, this does not seem to
scale.
Instead, a separate MLD level structure can be maintained which can
store all this ML related information. All affiliated link BSSs can keep
reference to this MLD structure.
This commit adds that MLD level structure. However, assigning values to
it and using that instead of BSS level members will be done in
subsequent commits.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
mld_id was provided as a user configuration to identify partner BSS
belonging to the same AP MLD. The same id is used at the protocol level
also to indicate the AP MLD ID of the MLD.
But, in general mld_id is a relative reference of the MLD where 0 is
used as the mld_id to represent the self MLD and in case of MLO MBSSID
mld_id of a non transmitted BSS affiliated to an AP MLD is based on the
relative BSS index of the non transmitted BSS from the transmitted BSS.
Hence mld_id need not be fetched from users, rather it can be identified
wherever required.
To verify if the partners belong to the same AP MLD the interface name
can be checked, since all link BSS partners of the same AP MLD belong to
the same interface.
Hence, remove use of mld_id user config and instead introduce two
functions hostapd_is_ml_partner() and hostapd_get_mld_id(). The former
is used to verify whether partners belong to the same AP MLD and the
latter is used to get the MLD ID of the BSS.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
In the code review, it was found that param->freq is accessed without
NULL check in wpa_driver_nl80211_set_ap(), while in other sections of
the code, freq is accessed only after NULL validation. This situation
could result in a segmentation fault at least in theory.
Add a NULL check for freq before accessing it to be consistent with the
other uses.
Fixes: 0c6c948047 ("nl80211: Support setting up an AP on a specified link")
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
mlme_event() calls nl80211_get_link_id_by_freq() to determine the link
to handle reported events. However, in channel switch event it is always
setting freq to the default link that leads to the issue that all other
events that go to mlme_event() will be handled in the default link.
Fix this by setting freq to the correct link specified by the link ID
when processing the event for a completed channel switch.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
The NL80211_CMD_DEL_BEACON command was always sent to the main interface
of the radio instead of the desired BSS interface, e.g., when sending a
STOP_AP control interface command from upper layer.
Signed-off-by: Nikita Chernikov <nchernikov@maxlinear.com>
Define attribute QCA_WLAN_VENDOR_ATTR_RATEMASK_PARAMS_LINK_ID in
enum qca_wlan_vendor_attr_ratemask_params to configure ratemask
per MLO link. If the attribute is not provided, ratemask will be
applied for setup link.
Signed-off-by: Shailendra Singh <quic_shasing@quicinc.com>
Add a new QCA vendor sub-command
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_COMPLETE which will be used as a
netlink event to indicate the completion of a spectral scan request.
This event can also be sent incase of the spectral scan request timeout.
To be able to configure the timeout the value, add a new vendor
attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COMPLETION_TIMEOUT in
enum qca_wlan_vendor_attr_spectral_scan.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a vendor attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_DATA_TRANSPORT_MODE
to indicate the current spectral data transport mechanism to be used to
get spectral scan samples from the driver to userspace.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When wpa_supplicant needed to update the internal BSS table with the
latest scan results from the driver, it fetched all BSSs and processed
them all. This is unnecessary for cases where an update is needed only
for a specific BSS. Optimize this by filtering out the unnecessary
entries from the results.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Update EAP-WSC parameters to include Multi-AP profile info to pass the
profile information through the provisioning steps. This is needed for
provisioning the STA configuration when different profiles are used.
Signed-off-by: Manoj Sekar <quic_sekar@quicinc.com>
Add support to fill "multi_ap_vlanid" info to the hostapd config file.
Add the Multi-AP Default 802.1Q Setting subelement into Multi-AP element
generating and parsing.
Signed-off-by: Manoj Sekar <quic_sekar@quicinc.com>
Add a new config option "multi_ap_client_disallow" to control allowing
backhaul STA with certain profiles alone to associate. This is done to
adhere to Wi-Fi EasyMesh specification which defined rules to
allow/disallow association of backhaul STA of certain profiles.
Signed-off-by: Manoj Sekar <quic_sekar@quicinc.com>
Allow both hostapd and wpa_supplicant to be configured with the
supported Multi-AP profile. The configured value will be advertised in
the Multi-AP element.
Signed-off-by: Manoj Sekar <quic_sekar@quicinc.com>
This makes it more convenient to handle extensions to the element and
allows code to be shared between hostapd and wpa_supplicant.
Signed-off-by: Manoj Sekar <quic_sekar@quicinc.com>
Replace the hardcoded buffer length with the actually number of
remaining bytes on the buffer. This is needed to be able to do real
buffer size validation within add_multi_ap_ie().
Furthermore, make hostapd_eid_multi_ap() static since it is not used
outside this file.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
To implement an action script that listens for DPP push button events
and for example blinks a LED it is useful to know when push button has
started. Emit an event when push button starts.
Signed-off-by: Evan Benn <evan.benn@morsemicro.com>
This is needed to allow some cases where puncturing prevents HT/VHT/HE
from using the full channel bandwidth.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is needed to be able to check validity of the channel parameters
for cases where EHT puncturing impacts what can be enabled for
HT/VHT/HE.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The testing functionality for overriding EHT puncturing bitmap was
applied only for the EHT elements. The mac80211 has been updated to
enforce compartibility between EHT and HT/VHT information and that made
the related test cases fail. Apply the override value for VHT element
generation to avoid some of those issues.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
A previous workaround was used to move the special operating class 130
to the end of the Supported Operating Classes element to avoid getting
any following entry being ignored or misunderstood. That is not really
the correct way of encoding the special cases, i.e., 80+80 MHz channels
that use two nonadjacent frequency segments.
Add support for encoding the 80+80 MHz channel with the 2-octet
operating class design using the Operating Class Duple sequence field of
the Supported Operating Classes element instead of listing the operating
classes that have the 80+ behavior limit set indication in Table E-4
(i.e., opclass 130 and 135) as 1-octet operating classes in the
Operating Classes field.
Fixes: a92660a00e ("Work around Supported Operating Classes element issues for 6 GHz")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Commit 085a3fc76e ("EHT: Add 320 channel width support") added this in
various places, but it did not cover everything. Extend this support to
be more complete. In particular, this allows wpa_supplicant to report
the operating class 137 in the Supported Operating Classes element and
to use it when processing beacon requests.
Signed-off-by: Ainy Kumari <quic_ainykuma@quicinc.com>
short_ssid in the own neighbor report might get out of sync, causing
advertising RNR element based on the old SSID, when SSID is changed
either with control interface command SET or with SIGHUP. Therefore,
sync the own report entry by removing the old entry and setting own
report again if the short SSID value has changed.
Signed-off-by: Nikita Chernikov <nchernikov@maxlinear.com>
Once the non-AP MLD is added to the driver, the driver handles the
address translation so that hostapd receives Management frames with
SA/DA being translated into MLD MAC addresses.
If the Authentication frmae is retransmitted with transaction being 1,
SA of the retransmitted Authentication frame is translated into the MLD
MAC address by the driver, and then in the function handle_auth(),
sta->mld_info.links[].peer_addr would be replaced by the MLD MAC address
even though it is supposed to be the link address.
Therefore, update the MLD information only when the STA has not yet been
added into the driver to avoid replacing the previously determined link
address with the MLD MAC address.
Fixes: bcbe80a66 ("AP: MLO: Handle Multi-Link element during authentication")
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
In theory, os_snprintf() could return a negative value and as such,
os_snprintf_error() should be used in all cases where the buffer might
not be large enough.
Signed-off-by: Jouni Malinen <j@w1.fi>
The event indicating expiration of an offchannel TX is useful for cases
where the wait is for a frame that was explicitly requested to have the
pending cookie to be saved.
Signed-off-by: Jouni Malinen <j@w1.fi>
Most places in the codebase use a valid_links bitmask with an array.
Switch the bss->links array to use the same design with the Link ID
being used as the array index instead of having a link_id inside.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
This was done using the below semantic patch. There are a few more
places that were missed due to variable declarations or additional
checks in the for loop.
@@
iterator name for_each_link;
identifier max_links =~ "MAX_NUM_MLD_LINKS|MAX_NUM_MLO_LINKS";
expression links;
expression further_tests;
identifier i;
statement stmt;
@@
-for (i = 0; i < max_links; i++)
+for_each_link(links, i)
{
(
- if (!(links & BIT(i)))
- continue;
...
|
- if (!(links & BIT(i)) || further_tests)
+ if (further_tests)
continue;
...
|
- if (further_tests || !(links & BIT(i)))
+ if (further_tests)
continue;
...
|
- if (links & BIT(i))
stmt
|
- if (further_tests && (links & BIT(i)))
+ if (further_tests)
stmt
|
- if ((links & BIT(i)) && further_tests)
+ if (further_tests)
stmt
)
}
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
This is a simple macro iterating the given bitmask using the given
variable. Having the macro avoids the for loop-continuation making it
more readable overall.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
In some places the wrong index variable was used to access the link
configuration. Fix this by simply using link_id instead of i.
With this, the i loop variable is not needed anymore. We can simply
always pass 0 to nla_nest_start(). Also, the kernel does not care about
the order that the links are provides, so just remove the special
handling for the association link.
Fixes: a2c4c0b1b6 ("nl80211: Support MLD association request")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
When a device supports both the 5 GHz band and the 6 GHz band,
these are reported as two separate modes, both with mode set to
HOSTAPD_MODE_IEEE80211A. However, as these are different modes,
each with its own characteristics, e.g., rates, capabilities etc.,
specifically differentiate between them by adding a flag to indicate
whether the mode describes a 6 GHz band capabilities or not.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
When wpa_supplicant assigns the IP address (WFA EAPOL IP address
allocation feature), the assigned IP address of the P2P Client on the GO
side is notified in the AP-STA-CONNECTED event. So to obtain the IP info
to external programs, modify the STA authorized event to include the the
assigned IP address of the P2P Client.
Test: Establish P2P connection and verified from the logs that
the P2P Client IP address is notified.
Signed-off-by: Sunil Ravi <sunilravi@google.com>
For AP MLD cases, the link id is required to determine the correct link
to stop in the stop_ap() driver op.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
The check for the non-AP MLD link being valid can be done one level
outside the loop that tries to find a matching AP link.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
For non-AP MLDs, clear STA entry from all affiliated links.
For legacy non-MLO case, find association link to clear the STA entry.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
This adds initial parts for RADIUS/TLS support in the RADIUS client.
This can be used with eapol_test and hostapd. This functionality is not
included by default and CONFIG_RADIUS_TLS=y in .config can be used to
enable it.
This version does not yet include all the needed functionality for TLS
validation and the rules for dropping a TCP connection based on invalid
RADIUS attributes.
Signed-off-by: Jouni Malinen <j@w1.fi>
There is only one connection in use in parallel to a RADIUS
authentication server (and similarly to a RADIUS accounting server). As
such, there is not really any need to maintain separate open IPv4 and
IPv6 sockets. Instead, open the socket for the appropriate IP version
only when actually connecting to a specific server.
Signed-off-by: Jouni Malinen <j@w1.fi>
There is no need for passing the sock and sock6 parameters separately
since they were always the same values for auth == 0 or auth == 1 cases.
Signed-off-by: Jouni Malinen <j@w1.fi>
ETHER_VLAN_ENCAP_LEN does not seem to be defined in macOS
net/ethernet.h, so define that, if needed, to avoid build issues.
Fixes: 5b21f4861c ("l2_packet_freebsd: Enable receiving priority tagged (VID=0) frames")
Signed-off-by: Jouni Malinen <j@w1.fi>
When the station (non-AP MLD) is associated with an AP MLD the link ID
for TDLS setup is derived from the discovery response frame and the link
ID is used in TDLS setup operation when acting as initiator. The driver
sends the received discovery response frame followed by the TDLS setup
request event. But the discovery response frame is received after the
setup request event leading to use incorrect link ID value for TDLS
setup operation causing the setup failure. Process the TDLS setup
request if the discovery response frame is received, else defer the
process until the discovery response frame is received and process the
setup request after discovery response frame is processed.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When the CHAN_SWITCH command is executed during multi BSSID case (say
BSS1, BSS2, and BSS3), if one of the BSS is disabled (say BSS2), the
CHAN_SWITCH command returns an error in BSS2 and does not proceed to the
next BSS (BSS3).
The CHAN_SWITCH command handler iterates over all configured BSSs and
attempts to send the switch_channel to each one. However, if any one of
the BSSs fails, the entire command is aborted and returns a failure.
Continue the iteration even if one BSS is failing to make sure the
configuration is applied to other BSSs.
Signed-off-by: Haribabu Krishnasamy <quic_hkr@quicinc.com>
During high battery voltage scenario, higher MCS data rate leads to poor
EVM accuracy which causes poor user experience. Hence to provide better
user experience, EVM accuracy needs to be improved by adjusting TX power
for MCS rate of specific band/radio chain. To achieve this, add a new
vendor command to configure required parameters in the WLAN driver.
Signed-off-by: Mukul Sharma <quic_mukul@quicinc.com>
Add hostapd support for interacting with the NAN discovery engine to
allow single-channel (i.e., the AP's operating channel) USD as Publisher
or Subscriber.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add wpa_supplicant support for interacting with the NAN discovery engine
to allow USD as Publisher or Subscriber.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add NAN discovery engine and wpa_supplicant interface to use it for the
subset of NAN functionality that is needed for USD.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This was missing a check for the Category field and could have matched
other Action frames than Public Action frames.
Fixes: 9c2b8204e6 ("DPP: Integration for hostapd")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The standard is somewhat unclear on whether the PMKIDs used in
(Re)Association Request frame (i.e., potential PMKIDs that could be used
for PMKSA caching during the initial mobility domain association) are to
be retained or removed when generating EAPOL-Key msg 2/4.
wpa_supplicant has replaced the PMKID List contents from (Re)Association
Request frame with PMKR1Name when generating EAPOL-Key msg 2/4 for FT.
Allow it to be configured (ft_prepend_pmkid=1) to prepend the PMKR1Name
without removing the PMKIDs from (Re)Association Request frame.
Signed-off-by: Jouni Malinen <j@w1.fi>
The standard is somewhat unclear on whether the PMKIDs used in
(Re)Association Request frame (i.e., potential PMKIDs that could be used
for PMKSA caching during the initial mobility domain association) are to
be retained or removed when generating EAPOL-Key msg 2/4.
hostapd used to require that only the PMKR1Name is included in the PMKID
List of RSNE in EAPOL-Key msg 2/4. Extend this to allow the PMKIDs that
were included in the (Re)Association Request frame to be present as long
as the correct PMKR1Name is also present. This would allow PMKSA caching
to be used in initial mobility domain association with supplicant
implementations that insert the PMKR1Name without removing the PMKIDs
used in the (Re)Association Request frame. wpa_supplicant did not use to
that, but other implementations might.
Signed-off-by: Jouni Malinen <j@w1.fi>
For some implementation, there is no link id in EAPOL event, e.g., use
drv_event_eapol_rx for receiving. Current design for such case is switch
to a link that stores the peer. However, this is error-prone because for
non-AP MLD case, sta_info is stored in all valid links but EAPOL sm is
only initialized in the association link. If EAPOL RX event is handled
in a non-association link, it will be discarded and this leads to EAPOL
timeout.
So find the association link to handle received EAPOL frame in such
case. This replaces the previously used workaround for RSN/wpa_sm for
the no link id specified case.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Disabling the first interface calls hapd_deinit(), which causes some
issues, e.g., failure when trying to disable other interfaces due to
NULL drv_priv.
So check that all other interfaces are already disabled before disable
the first interface.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
When association is handled in hostapd, a non-AP MLD's info is stored in
all valid links. This should be the same when SME is offloaded to the
driver.
Also skip some operations that are already done by the driver
when SME is offloaded.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Return the result from the first hostapd_is_usable_chan() call instead
of the following attempts in case of ht40_plus_minus_allowed to have
consistent behavior with the case where only one option is specified.
This allows the fallback to 20 MHz to work in additional cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When ACS offloaded to the driver, the channel selected event carries
link id to specify the link if operating as AP MLD.
Find the specified link to handle this event.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
ACS is triggered per link, so link id is needed for the driver to handle
when the ACS operation is offloaded.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
