This allows to use the ROAM control interface command to force roaming
on a transition network. Previously, this was not possible, as the open
SSID is stored for the connection profile. Add a new function to also
return OWE transition networks if the profile SSID is set as the
transition-ssid for the OWE RSN network.
Signed-off-by: David Bauer <mail@david-bauer.net>
The value currently is simply incremented, but it must not
reach 255 and rather wrap around from 254 to 0, since in
the Reduced Neighbor Report 255 means unknown. Fix that.
Fixes: d95838b793 ("AP: Add support for testing ML link removal")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Link Id attribute is required for
qca_wlan_vendor_attr_external_acs_event to identify the link on which
the command is received for an AP MLD.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_LINKID attribute to the
ADD_STA_NODE command to identify a specific link affiliated to an AP
MLD.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new sub command QCA_NL80211_VENDOR_SUBCMD_AUDIO_TRANSPORT_SWITCH
to request the audio data transport switch in both the command and event
path. This is used when two or more audio data transports are available
between peers.
Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
The driver might delete the STA node details on receiving external auth
status. In SAE authentication failure case on the AP, an Authentication
frame with a failure status is sent to the driver after sending the
external auth status. Authentication frame transmission didn't have a
dependency with STA node details earlier, but with MLO, Authentication
frames should be transmitted using the link address for a given MLD MAC
address by the supplicant. Since MLD to link address translation is done
by the driver, the STA node details are required to transmit the
Authentication frame. Hence, send external auth status to the driver
after sending the Authentication frame.
SAE external auth was introduced in commit 4ffb0fefe4 ("hostapd:
Support external authentication offload in AP mode"), which requires the
change in order of sending Authentication frame and auth status in case
of failure when using MLO.
Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com>
Use the RSN Override Link KDE to include the override variants of the
RSNE/RSNXE for each link so that all variants are verifies when
processing the protected EAPOL-Key message 3/4.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This allows all variants to be verified based on a protected frame to
achieve robust downgrade protection.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This provides an implicitly protected (SNonce is used as an input to PTK
derivation) mechanism for a STA to indicate support for RSN overriding
in a manner that does not cause interopability issues with deployed APs.
In addition, update sm->SNonce on the Authenticator only based on
message 2/4 since that is the only EAPOL-Key message that is defined to
provide the actual SNonce value. While clearing of this internal buffer
on message 4/4 might not cause issues, it is better to keep the actual
SNonce value here since the SNonce cookie can be used at a later point
in the sequence.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This replaces the use of the RSNE Override and RSNE Override 2 elements
with empty payload to indicate which RSNE variant was used.
In addition, this adds stricter validation of the RSNE in
(Re)Association Request frame to allow only the pairwise cipher suites
and AKMs listed in the indicated RSNE variant to be used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The separate RSNOE/RSNO2E/RSNXOE buffers were not actually used on the
Authenticator, so remove them.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
hostapd_eid_assoc_fils_session() might return NULL if memory allocation
fails. This NULL value then will be used for invalid calculation and
cause unspecified behavior or be dereferenced unexpectedly. Avoid this
with an explicit check of the returned pointer.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Use else-if check for better clarity regarding usage of wpa_ie_buf3 to
make it explicit that memory is allocated for this pointer only once.
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
The new hostapd configuration parameter eapol_key_reserved_random=1 can
be used for testing STA/Supplicant functionality to accept a random
value in the Reserved field within EAPOL-Key frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is convenient for testing STA behavior with various RSN element
combinations and special cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The RSNXE generation function was extended to support this earlier, but
that update was missed from the RSNXOE variant.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add an explicit rsn_override_omit_rsnxe=1 configuration parameter to
allow the RSNXE to be omitted when using the RSNXOE and wanting to
minimize interoperability issues with STAs that might recognize the
RSNXE, but not handle it correctly, e.g., when multiple octets of
payload is included.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
wpa_supplicant select_network() relies on fast_associate to reuse old
scan results. However, this approach does not apply in some cases in
Android:
1 - If the selected network is hidden, and the SSID is in Chinese,
Android switches between fallback SSIDs, necessitating a new scan for
switching between different hidden SSIDs.
2 - Similarly, if the selected SSID is OWE (Opportunistic Wireless
Encryption), and the OWE SSID bands have been changed, select_network()
requires a fresh scan to discover hidden OWE SSIDs.
To address these, enhance select_network() to trigger new scans instead
of relying on fast_associate. This improves network selection behavior
in Android.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use current connection MLO capability to fetch the appropriate
RSNE/RSNXE variant while processing association event.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
wpa_supplicant was ignoring RSNXE also if the AP is not using valid
RSN overriding combination when the STA supports RSN overriding. Fix
this fallback to the RSNXE when AP is not using valid RSN overriding.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add a new QCA command QCA_NL80211_VENDOR_SUBCMD_USD and related
attributes to support Unsynchronized Service Discovery (USD).
Device in active subscriber role sends SDF frames with service
information to find devices that advertise or publish the required
services. Device address, operation type, instance id, service_id,
channel info, service specific info, element container attribute, and
timeout are sent to the driver to initiate USD publish or USD subscribe
operation. The driver sends QCA_NL80211_VENDOR_SUBCMD_USD event with
instance_id and the USD operation status. QCA_NL80211_VENDOR_SUBCMD_USD
is also used to update publish operation and to cancel the publish or
subscribe operation for a service. It also allows all the operations to
be terminated using the USD flush command.
Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com>
Add support for RSNE/RSNXE Override elements. Use these elements to
determine AP's extended RSN parameters.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new capability flag based on the nl80211 feature advertisement for
RSN overriding support.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Allow hostapd to be configured to advertised two separate sets of
RSNE/RSNXE parameters so that RSNE/RSNXE can use a reduced set of
capabilities (e.g., WPA2-Personal only) for supporting deployed STAs
that have issues with transition modes while the new override elements
can use a newer security option (e.g., WPA3-Personal only) for STAs that
support the new mechanism.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Update the version number for the build and also add the ChangeLog
entries for both hostapd and wpa_supplicant to describe main changes
between v2.10 and v2.11. Update the copyright years for the main
programs.
Signed-off-by: Jouni Malinen <j@w1.fi>
Using D-Bus, it is possible to add a valid UPnP service where 'query'
and 'response' are specified. In this case, memory for 'query' and
'response' is allocated but not used nor freed. Valgrind complains as
follows:
42 bytes in 1 blocks are definitely lost in loss record 32 of 75
at 0x484C214: calloc (vg_replace_malloc.c:1675)
by 0x41C673: wpabuf_alloc (wpabuf.c:124)
by 0x41C673: wpabuf_alloc_copy (wpabuf.c:162)
by 0x54F41A: wpas_dbus_handler_p2p_add_service (dbus_new_handlers_p2p.c:2762)
by 0x53B9A2: msg_method_handler (dbus_new_helpers.c:356)
by 0x53B9A2: message_handler (dbus_new_helpers.c:412)
by 0x4EAB4B8: dbus_connection_dispatch (in /usr/lib64/libdbus-1.so.3.19.13)
by 0x5495DF: dispatch_data (dbus_common.c:37)
by 0x5495DF: process_watch (dbus_common.c:73)
by 0x5495DF: process_watch_read (dbus_common.c:89)
by 0x41EE8E: eloop_sock_table_dispatch.part.0 (eloop.c:603)
by 0x41FA46: eloop_sock_table_dispatch (eloop.c:597)
by 0x41FA46: eloop_run (eloop.c:1233)
by 0x56A3CE: wpa_supplicant_run (wpa_supplicant.c:8074)
by 0x40DB06: main (main.c:393)
49 bytes in 1 blocks are definitely lost in loss record 37 of 75
at 0x484C214: calloc (vg_replace_malloc.c:1675)
by 0x41C673: wpabuf_alloc (wpabuf.c:124)
by 0x41C673: wpabuf_alloc_copy (wpabuf.c:162)
by 0x54F348: wpas_dbus_handler_p2p_add_service (dbus_new_handlers_p2p.c:2755)
by 0x53B9A2: msg_method_handler (dbus_new_helpers.c:356)
by 0x53B9A2: message_handler (dbus_new_helpers.c:412)
by 0x4EAB4B8: dbus_connection_dispatch (in /usr/lib64/libdbus-1.so.3.19.13)
by 0x5495DF: dispatch_data (dbus_common.c:37)
by 0x5495DF: process_watch (dbus_common.c:73)
by 0x5495DF: process_watch_read (dbus_common.c:89)
by 0x41EE8E: eloop_sock_table_dispatch.part.0 (eloop.c:603)
by 0x41FA46: eloop_sock_table_dispatch (eloop.c:597)
by 0x41FA46: eloop_run (eloop.c:1233)
by 0x56A3CE: wpa_supplicant_run (wpa_supplicant.c:8074)
by 0x40DB06: main (main.c:393)
Fix this ensuring that query and resp are freed both in the error and
non-error path of wpas_dbus_handler_p2p_add_service(). Also, add a test
in test_dbus.py to verify the correct behavior.
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
SignalChange should be defined as a property of an interface.
Previously, it was incorrectly defined as a property of P2P peers.
Fixes: 7a7ce95746 ("dbus: Emit more information over D-Bus")
Signed-off-by: David Ruth <druth@chromium.org>
In the hostapd_cleanup_driver() function, the NULL check for the driver
private data (drv_priv) is located within the CONFIG_IEEE80211BE feature
flag. As a result, on platforms where CONFIG_IEEE80211BE is not defined,
driver->hapd_deinit(drv_priv) is called with drv_priv set to NULL. This
leads to a null pointer exception in wpa_driver_nl80211_deinit().
To address this issue, move the NULL check for drv_priv outside the
CONFIG_IEEE80211BE build flag. This ensures that the check is performed
regardless of the value of CONFIG_IEEE80211BE, preventing the NULL
pointer exception.
Fixes: df34c2ced3 ("AP MLD: De-initialize/disable link BSS properly")
Signed-off-by: Sunil Ravi <sunilravi@google.com>
Currently wpa_ft_parse_ies() is setting FTE information to wpa_buf
pointer data which is generated after defragmentation. This data will
not contain FTE and Fragment element(s) headers.
IEEE P802.11be/D5.0 describes the MIC to be calculated on the
concatenation of FTE and corresponding Fragment element(s) which
implies the element headers are included for each element in the
fragmented case.
Fix this by correctly populating FTE information when FTE is
fragmented.
Fixes: 43b5f11d9 ("Defragmentation of FTE")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Non-AP MLD finds AP MLD's partner links by BSSID from the scan results.
However, if the scan results contain BSSs with the same BSSID but
different BSS information, the non-AP MLD might assign a wrong BSS to
one of the AP MLD's partner links.
Avoids the problem by using both BSSID and SSID to find the AP MLD's
partner links.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
During CSA with DFS channels, disable, enable interface is a part of the
algorithm. When interface was enabled old operating class before switch
and new channel were used causing mismatch in
configured_fixed_chan_to_freq() function.
Example of log when switch from channel 157 to 108 was triggered:
"Could not convert op_class 124 channel 108 to operating frequency"
Fixes: bb781c763 ("AP: Populate iface->freq before starting AP")
Signed-off-by: Marek Kwaczynski <marek@mazekey.pl>
When multi_ap is active, hostapd creates an AP-VLAN interface for 4addr
stations, even though wds_sta is not configured.
A check should be added to determine if wds_sta is active before
re-enabling the WDS mode by creating an AP-VLAN for 4addr stations.
Signed-off-by: Baligh Gasmi <gasmibal@gmail.com>
Going through five extra rounds of SAE commit messages in cases where
SAE peers are somehow unsynchronized feels unnecessary much to do by
default, so drop the default value to 3.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
