Currently, AID is not allocated properly in hostapd for legacy non-MLD
STA in case of an AP MLD. All such stations have same AID.
Fix this issue by allocating AID properly in hostapd when operating as
an AP MLD and the STA is not an MLD.
Fixes: d924be3bd0 ("AP: AID allocation for MLD")
Signed-off-by: Harish Rachakonda <quic_rachakon@quicinc.com>
This is an event indicating to the user space to disassociate with
peer based on the peer MAC address provided.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
The test here wants to connect and then disconnect again, but it's
driven only by the GO side, so the client may end up (with UML
time-travel) not fully connecting, and then it all fails. Wait for the
client to have connected first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
OpenSSL 3.2 added support for HPKE. Use that implementation when
possible. At least for now, the internal version needs to be included as
well to be able to cover the special DPP use case with brainpool curves.
Signed-off-by: Jouni Malinen <j@w1.fi>
The use of a MAC KDE in the Key Data field of an EAPOL-Key Request frame
was only for the STAKey handshake. That handshake was implemented in
2005 as an experimental functionality and it was then removed in 2006.
However, this part of the functionality was forgotten. This does not do
anything in practice, so simplify the implementation and remove it.
Signed-off-by: Jouni Malinen <j@w1.fi>
The Encrypted Key Data field need to be set to 1 whenever using an AEAD
cipher. Without this, the Authenticator would discard the EAPOL-Key
request frame when using FILS.
Signed-off-by: Jouni Malinen <j@w1.fi>
EAPOL-Key request is accepted only if the MIC has been verified, so PTK
must have already been derived and Secure=1 needs to be used. Check the
Secure bit explicitly for completeness even though the MIC verification
is already taking care of validating that the sender is in the
possession of valid keys.
Signed-off-by: Jouni Malinen <j@w1.fi>
While the Authenticator state machine conditions are already checking
for sm->EAPOLKeyRequest, it seems clearer to explicitly discard any
EAPOL-Key Request frame that is received unexpectedly during a 4-way
handshake.
Signed-off-by: Jouni Malinen <j@w1.fi>
There is no need to try to process the EAPOL-Key frame if it has an
unexpected Key Descriptor Version value. Move these checks to happen
earlier in the sequence. In adition, use a separate helper function for
this to simplify wpa_receive() a bit.
Signed-off-by: Jouni Malinen <j@w1.fi>
Check that the EAPOL-Key frame Key Descriptor Version value is one of
the defined values explicitly instead of failing to process the Key Data
field later (or end up ignoring the unexpected value if no processing of
Key Data is needed).
Signed-off-by: Jouni Malinen <j@w1.fi>
IEEE Std 802.11-2020 describes the rule based on not-TKIP for value 2
and no pairwise cipher condition on value 3, so use that set of more
generic rules here.
Signed-off-by: Jouni Malinen <j@w1.fi>
p2p_go_neg_init() ignored the provided timeout value and used the
default 15 second timeout in discover_peer(). This did not allow the
recently added go_neg_pbc() timeout increase for concurrent cases to be
used fully.
Signed-off-by: Jouni Malinen <j@w1.fi>
In hostapd_set_freq_params(), if center_segment0 is 2, call
ieee80211_chan_to_freq() with operating class 136 instead of 131.
This is needed because, channel 2 is an exception in the 6 GHz band. It
comes before channel 1 and is part of operating class 136.
Channels order in 6 GHz:
2 (Operating Class 136)
1 5 9 .... (Operating Class 131)
Signed-off-by: Thirusenthil Kumaran J <quic_thirusen@quicinc.com>
Add a new attribute for
%QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION subcommand. This
attribute is an 8 bit unsigned value used to specify whether an
associated peer is a QCA device.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Accept any sequence and number of responses as long as the needed
Bonjour and UPnP services are found.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If a GAS response is received for a pending SD query, process it even if
the TX status event for the query has not yet been received. It is
possible for the TX status and RX events to be reordered especially when
using UML time-travel, so this is needed to avoid race conditions to
make SD more robust.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If both 6 GHz and S1G channels are included, the previously used timeout
was not long enough at least with mac80211_hwsim. Increase the initial
timeout to allow such a scan to be completed.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The full scan at the beginning of the chirping step can take over 15
seconds when 6 GHz and S1G channels are included and the timeout here is
not enough to handle that.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Explicitly flush the scan cache in wpa_supplicant and cfg80211 to avoid
test failures here. An additional BSS table entry from a scan based on a
previous test case could result in causing this test case to report
failure since each beacon response could include multiple entries and
the check for the details would fail due to the unexpected data.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Explicitly wait for the STA to complete connection or channel switch
processing before running the second connectivity check.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This makes it a bit easier to understand what happens with random
channel selection after radar detection.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It is possible for the parallel connection attempt with an AP and P2P
device discovery with P2P search on social channels to take close to the
15 second timeout and these test cases could fail because of that
instead of a real issue. Increase the timeout to make this less likely
to cause test failures. In addition, add a debug entry to the log on the
r_dev timeout to avoid confusing print from the i_dev thread reporting a
timeout even when the first timeout was on the rdev_
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
wpa_supplicant disables BTM capability in Extended Capabilities element
when wpa_supplicant selects a misbehaving MBO/OCE AP that uses RSN
without PMF, but this is disabling BTM support for whole ESS connection
lifetime though the BTM support can be enabled when the driver takes
care of BSS selection and selects/roams to a BSS which is MBO and OCE
specification compliant. Thus, always set the actual BTM capability in
Extended Capabilities element when the driver takes care of BSS
selection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Commit 0660f31ba0 ("wlantest: wlantest: Adjust kdk_len according to
RSNX capability") added support for PTK derivation and the additional
KDK component when Secure LTF support is used in the non-FT case.
Cover the same for the FT case to derive the correct PTK and consider
the additional KDK component when Secure LTF support is used.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Similar to other cases before, this may end up trying to
send the frame before the carrier state is ready. Ensure
it's ready before sending the frame.
To do that, rename the sync_carrier() function and make
the ifname argument optional.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to scheduling in UML time-travel, the test may continue
running and find that the failure didn't trigger when really
the frame just didn't make it through to the other side. Add
some time for the necessary processing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST needs be to set per
link if operating as an AP MLD.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
The previous os_strncmp() calls have already verified that there is a
space in the string, so this os_strchr() call cannot really return NULL.
Anyway, make this easier for static analyzers to understand.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The file needs to be closed on all paths before exiting from the
function.
Fixes: e748e50c62 ("SAE passwords from a separate file")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It looks like best might be NULL in some cases, so check for this
explicitly before trying to dereference it for a debug print.
Fixes: 733de85680 ("ACS: Fix not selecting the best channel in the segment")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
key_data_buf is already freed on the common exit path, so do not try to
free it here on error.
Fixes: 4abc37e67b ("Support Key Data field decryption for EAPOL-Key msg 2/4 and 4/4")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
src/ap/ap_config.c is not really supposed to call directly into a
function in hostapd/config_file.c. Furthermore, the wrapper through
ap_config.c did not really have any real value since it just called a
function that is within hostapd/*.c and that wrapper was called from
hostapd/*.c.
Instead of the wrapper, just call the function directly within the
hostapd directory.
Fixes: 392114a179 ("FT: Add dynamic reload of RxKH definitions from file")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
peerkey from EVP_PKEY_new() needs to be freed on all error paths.
Fixes: b062507670 ("OpenSSL: Implement crypto_ecdh routines without EC_KEY for OpenSSL 3.0")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This makes valgrind reports somewhat cleaner when external libraries
have memory leaks that are not straighforward to fix. In addition,
increase the number of functions to include backtraces since the default
was not large enough to cover some cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If the driver fetch for the current sequency number fails, do not try to
print the value in a debug print without having cleared it.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
put_changed_properties() might fail, e.g., due to memory allocation
failure or a failure in a property getter function. Such an error case
would have leaked the message iteration container since the call to
dbus_message_iter_close_container() would have been skipped.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Radar detection event could have resulted in the driver interface
instance getting deinitialized and the related memory freed in the
middle of the loop. This was not an issue when the event was passed only
into a single interface, but it became an issue when the loop tried to
send it to all interfaces. If the driver were removed, that loop check
would have used freed memory. Avoid this by explicitly checking that the
driver interface instance is still valid.
Fixes: f136837202 ("nl80211: Pass wiphy events to all affected interfaces")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The TX status handler for DPP Authentication Confirm message might have
resulted in use-after-free if the start of a GAS query were to fail,
e.g., due to being somehow unable to transmit the initial request. Avoid
this by explicitly confirming that the authentication session was not
removed.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The current connection (struct dpp_connection) might get removed during
the dpp_tcp_send_msg() call, so the code setting the
on_tcp_tx_complete_remove flag needs to check whether that happened to
avoid a potential use-after-free.
Fixes: 33cb47cf01 ("DPP: Fix connection result reporting when using TCP")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When removing the bootstrap info for the PB context, all the possible
pointers to that information needs to be cleared to avoid accesses to
freed memory.
Fixes: 37bccfcab8 ("DPP3: Push button bootstrap mechanism")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
