Indicate the protocol version number that the Enrollee used during the
DPP exchange that resulted in the generation of the Connector.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
CONFIG_DPP3=y can now be used to configure hostapd and wpa_supplicant
builds to include DPP version 3 functionality. This functionality is
still under design and the implementation is experimental and not
suitable to be enabled in production uses before the specification has
been finalized.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Align the process logic for ap_vendor_elements and ap_assocresp_elements
parsing by using the wpabuf_parse_bin() helper function in both.
Signed-off-by: Chaoli Zhou <zchaoli@codeaurora.org>
wpa_add_scan_freqs_list() was updated to use bool for the is_6ghz
argument, but these callers were missed when updating the values from
0/1 to false/true.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
The channels included for the scan to connect to a P2P GO are optimized
such that the P2P GO preferred channel and the common channels are
included for the first few scans followed by a full scan in which all
the channels supported by the local device are included. This results in
P2P client including the 6 GHz channels for the full scan after GO
Negotiation even when 6 GHz channels are not used for the P2P
connection.
Exclude the 6 GHz channels from the full scan if 6 GHz channels are
supported but are not used for P2P connection.
Signed-off-by: Sreeramya Soratkal <ssramya@codeaurora.org>
Add a QCA vendor attribute to indicate the puncture pattern derived
by the automatic channel selection algorithm.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
After roaming to a new AP using driver-based SME and roaming trigger,
update proto type, AKMP suite, and pairwise cipher suite based on the
(Re)Association Request frame. Update PMF, group cipher, and group mgmt
cipher based on the AP's RSNE into wpa_sm. group_mgmt_cipher needs to be
updated based on PMF capabilities of STA and roamed AP.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Since the 6 GHz band has no DFS channels, enable 6 GHz 160 MHz bandwidth
as the default configuration for IEEE 802.11s mesh.
example:
network={
ssid="6gmesh160"
key_mgmt=SAE
mode=5
frequency=6275
psk="1234567890"
}
Signed-off-by: P Praneesh <ppranees@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
IEEE Std 802.11ax-2021 mandates 6 GHz STA to use Management Frame
Protection (MFP) when RSN is enabled.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Channel numbers of the 6 GHz band overlap those of the 2.4 GHz and 5 GHz
bands. Thus converting to frequency based mesh channel selection helps
accommodate 6 GHz mesh.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Reduced neighbor report has a field to indicate whether unsolicited
Probe Response transmission is active. Add a check to return failure if
both FILS discovery and unsolicited Probe Response are enabled at the
same time to ensure that RNR includes valid data.
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
When a Probe Request frame from a station includes an SSID matching that
of a co-located 6 GHz AP, AP should respond with a Probe Response frame
that includes Reduced Neighbor Report element containing information
regarding the requested BSS.
Signed-off-by: Muna Sinada <msinada@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Update 2.4/5 GHz Beacon frames every time Beacon frames for co-located 6
GHz AP(s) are set. This is required for 6 GHz out-of-band discovery so
that lower band Beacon frames will include RNR element with 6 GHz AP
information irrespective of the AP bring-up order. Similarly, RNR is
included in FILS Discovery frames by default in 6 GHz-only mode,
updating the Beacon frames will remove it when co-located 2.4/5 GHz
interfaces are brought up.
This change also ensures that the changes in 6 GHz AP configuration such
as new channel and bandwidth get reflected in the lower bands Beacon
frames.
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Add Reduced Neighbor Report element in Beacon, Probe Response, and FILS
Discovery frames.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Include Reduced Neighbor Report element in Beacon and Probe Response
frames by default if the reporting AP is 2.4/5 GHz and it is co-located
with a 6 GHz AP. Similarly, include RNR by default in FILS Discovery
frames if the AP is a standalone 6 GHz AP.
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Calculate the length and include data for the BSSes active on the same
radio as the reporting BSS in the Reduced Neighbor Report element. This
element is included in Beacon and Probe Response frames.
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Co-developed-by: Muna Sinada <msinada@codeaurora.org>
Signed-off-by: Muna Sinada <msinada@codeaurora.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Include data from the existing neighbor database in the Reduced Neighbor
Report element in Beacon frames if the configuration option 'rnr' is
enabled for the BSS.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Muna Sinada <msinada@codeaurora.org>
Co-developed-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Adds configuration option 'rnr' to enable the reduced neighbor report
elements in Beacon and Probe Response frames.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Add definitions for the fields described in IEEE Std 802.11-2020 and
IEEE Std 802.11ax-2021, 9.4.2.170 Reduced Neighbor Report element.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Muna Sinada <msinada@codeaurora.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Instead of constructing a custom error handler freeing the same set of
allocated memory areas on various error cases, share the success path
freeing implementation for the error cases as well.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Add a new field to include BSS Parameter subfield in the neighbor
database as described in IEEE Std 802.11ax-2021, Figure 9-632a (BSS
Parameters subfield format). This field holds information related to
multiple BSSID, access point co-location, and 20 TU probe response
active/inactive state.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Calculate and store short SSID in hostapd_data context during config
load time and in neighbor report.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
After roaming to a new AP using driver-based SME and roaming trigger,
AKMP and proto were not updated in wpa_sm. Hence, update AKMP and proto
used with roamed AP when association event received from the driver in
SME offloaded to the driver scenario to avoid incorrect AKMP details in
wpa_supplicant similarly to how the cipher suite updates were added in
commit 2b3e64a0fb ("Update ciphers to address GTK renewal failures
while roaming") .
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
OpenSSL 1.0.2 did not define the 'bytes' argument to
X509_NAME_add_entry_by_NID() to be const like it did for the previously
used X509_NAME_add_entry_by_txt(). Add a backwards compatible version of
this call to avoid compilation issues.
Fixes: d51939f2c4 ("DPP: Move CSR routines to use crypto.h")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
When checking DPP capabilities the Brainpool flag was not always set
when needed, leading to run a test with the Brainpool curves not
supported by BoringSSL.
Use a short form for the DER length of EC privateKey with NIST P-521
curve. Indeed BoringSSL returns an error when parsing DER sequence 30 81
50 ... because the length 81 50 could have been encoded as 50 and
according comment in BoringSSL:
ITU-T X.690 section 10.1 (DER length forms) requires encoding the
length with the minimum number of octets.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
As BoringSSL version of i2d_PUBKEY() doesn't respect the
POINT_CONVERSION_COMPRESSED flag redefine a specific
crypto_ec_key_get_subject_public_key() version for BoringSSL based on
dpp_bootstrap_key_der().
The only other user of crypto_ec_key_get_subject_public_key() is SAE-PK
for which the public key should also be formatted using compressed
format.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Use crypto.h API to implement ECDH in DPP. This needs a new
initialization function in crypto.h to initialize an ECDH with a given
EC key.
Using crypto_ecdh_set_peerkey() to generate the ECDH secret in an
intermediate and dynamically allocated buffer removed the need for the
DPP-specific workaround for inconsistent length returned by
EVP_PKEY_derive() since that crypto_ecdh_set_peerkey() implementation
already had functionality for covering the changing secret_len value
from commit d001fe31ab ("OpenSSL: Handle EVP_PKEY_derive() secret_len
changes for ECDH").
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
In case the public key was not included in the EC private key ASN.1
sequence, the flag that was cleared was not the right one. Fix this by
using EC_KEY_set_enc_flags() for both setting and clearing the
EC_PKEY_NO_PUBKEY flag instead of trying to clear that with the
unrelated EC_KEY_clear_flags() function.
Fixes: 2d5772e691 ("DPP: Factorize conversion to ASN.1 ECPrivateKey")
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Wi-Fi Display functionality needs P2P to be enabled. Ignore
CONFIG_WIFI_DISPLAY if CONFIG_P2P is not enabled for the build. This
avoids following compilation issue with invalid build configuration:
../src/ap/ap_drv_ops.c: In function 'hostapd_build_ap_extra_ies':
../src/ap/ap_drv_ops.c:163:10: error: 'struct hostapd_data' has no member named 'p2p_group'
163 | if (hapd->p2p_group) {
| ^~
../src/ap/ap_drv_ops.c:165:35: error: 'struct hostapd_data' has no member named 'p2p_group'
165 | a = p2p_group_assoc_resp_ie(hapd->p2p_group, P2P_SC_SUCCESS);
| ^~
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
/usr/bin/ld: /home/honma/git/hostap/build/wpa_supplicant/src/wps/wps.o: in function `wps_deinit':
/home/honma/git/hostap/wpa_supplicant/../src/wps/wps.c:184: undefined reference to `dh5_free'
/usr/bin/ld: /home/honma/git/hostap/build/wpa_supplicant/src/wps/wps_common.o: in function `wps_derive_keys':
/home/honma/git/hostap/wpa_supplicant/../src/wps/wps_common.c:83: undefined reference to `dh5_derive_shared'
/usr/bin/ld: /home/honma/git/hostap/wpa_supplicant/../src/wps/wps_common.c:84: undefined reference to `dh5_free'
/usr/bin/ld: /home/honma/git/hostap/build/wpa_supplicant/src/wps/wps_attr_build.o: in function `wps_build_public_key':
/home/honma/git/hostap/wpa_supplicant/../src/wps/wps_attr_build.c:68: undefined reference to `dh5_free'
/usr/bin/ld: /home/honma/git/hostap/wpa_supplicant/../src/wps/wps_attr_build.c:69: undefined reference to `dh5_init'
collect2: error: ld returned 1 exit status
make: *** [Makefile:1892: wpa_supplicant] Error 1
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Keep the locally defined ASN.1 sequence DPP_BOOTSTRAPPING_KEY for now to
avoid losing a workaround for BoringSSL from commit 746c1792ac ("DPP:
Build bootstrapping key DER encoding using custom routine").
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Instead of generating EC point with random coordinates, generate a
valid EC point and then corrupt the coordinates after exporting them
in binary format.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Remove one more direct call to OpenSSL using crypto_ec_key_group() to
compare group of c-sign-key and ppKey when creating Configurator from
backup data.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Rewrite functions related to reconfig feature using EC point/bignum
primitives defined in crypto.h API.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Add two new functions in crypto.h that "wrap" around already defined
signing function with (r,s) interface instead of DER Ecdsa-Sig-Value.
Using those functions implies to compute the hash to sign manually
before.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Rewrite dpp_auth_derive_l_responder/initiator() using EC point/bignum
primitives defined in crypto.h API.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Rewrite EC point/bignum computation done in PKEX protocol using EC
point/bignum primitives already defined in crypto.h and couple of small
new helper functions.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Function crypto_ec_key_parse_priv() already parses ASN.1 ECPrivateKey so
use it when possible.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
The extra validation steps through the OpenSSL X509 API are not really
necessary here and they most duplicate checks that happen implicitly
within d2i_PUBKEY() and the EVP_PKEY_get0_EC_KEY() checks in
crypto_ec_key_parse_pub().
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
Move code of dpp_set_pubkey_point_group() into crypto.h API. This
function initializes an EC public key using coordinates of the EC point
in binary format.
Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
