Sometimes there is a program error to send a large number of commands to
wpa_supplicant, and the source address can help quickly find the program
that sends commands.
Signed-off-by: xinpeng wang <wangxinpeng@uniontech.com>
EINTR will cause the loop to restart, which means that the total
time could be significantly longer than 10 seconds.
Signed-off-by: Alan DeKok <aland@deployingradius.com>
This is needed to work with TLS 1.3 key derivation. It looks the needed
functionality was added in wolfSSL 4.7.0.
Signed-off-by: Jouni Malinen <j@w1.fi>
These were testing only of SAE, not SAE-PK capability, and needs to be
skipped in SAE-PK is not included in the build.
Signed-off-by: Jouni Malinen <j@w1.fi>
priv_sz and pub_sz needs to be initialized to the buffer size before the
wc_DhGenerateKeyPair() call. The previous version happened to work in
some cases where a separate handled prime length was used, but not for
the generic case.
Signed-off-by: Jouni Malinen <j@w1.fi>
It looks like crypto_ecdh_set_peerkey() had started failing at some
point with a wolfSSL update due to ECC_TIMING_RESISTANT from
--enable-harden requiring RNG to be set.
Signed-off-by: Jouni Malinen <j@w1.fi>
Add support for EAP server to cache TLS sessions (see hostapd
configuration parameter tls_session_lifetime).
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
eapol_test.c contains variants of couple of functions from the hostapd
implementation. Those had not been updated for a while and this commit
brings in the main changes to keep the implementations closer to
each other.
Signed-off-by: Jouni Malinen <j@w1.fi>
This is needed to allow wpa_supplicant to be built with EAP-pwd, but
without any other EAP method that pulled in MS_FUNCS.
Signed-off-by: Jouni Malinen <j@w1.fi>
It was possible to miss the HMAC functions if some other build
configuration parameters ended up setting NEED_SHA384/512=y.
Signed-off-by: Jouni Malinen <j@w1.fi>
The acs_exclude_dfs parameter is documented as a way to exclude DFS
channels when performing ACS without disabling DFS altogether. The
problem is this parameter is only enforced when ACS is offloaded to the
driver (WPA_DRIVER_FLAGS_ACS_OFFLOAD). So from now on, lets also check
acs_exclude_dfs in the internal ACS implementation to exclude channels
marked with radar detection.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
The previous mechanism of unloaded the providers from tls_deinit() did
not work correctly for some cases. In particular, it was possible for
hostapd to end up unloading both providers and not being able to recover
from this if TLS server was not enabled.
Address this more cleanly by introducing a new crypto_unload() function
that will be called when the process is exiting.
Fixes: 097ca6bf0b ("OpenSSL: Unload providers on deinit")
Signed-off-by: Jouni Malinen <j@w1.fi>
This commit activates the functionality of the previous commits by
handling the actual events that will trigger the CCA process.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Process the color collision and color change related events.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
To start the CCA process we need to send NL80211_CMD_COLOR_CHANGE to the
kernel. This commit adds the required code.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
While we are doing CCA the BSS Color Disabled field inside the HE
Operation Parameters field needs to be set.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
This information element is similar to the CSA one. It contains a
counter and the target color. Once the counter expired, the change to
the new color happens.
Just note the current implementation is based on CCA counter attributes
that only take Beacon and Probe Response framesinto account.
(Re)Association Response frames do not currently have kernel APIs to
decrement the CCA counter since mediatek mcu firmware does not support
it yet and it will be added in future firmware release.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Add the core code for handling BSS color collision events and triggering
CCA inside the kernel. The caller of hostapd_switch_color() will be
added in the following commits.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
We don't particularly care about the quality of random numbers
during the test. So far, there hasn't been an issue with the
RNG not being initialized completely, we only get a few prints
about uninitialized reads from urandom. However, if some tool
were to actually use /dev/random, it might get stuck. Call the
RNDADDTOENTCNT ioctl to unblock this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The previous versions are going to be expiring soon, so need to re-sign
these to avoid EAP test case failures. This contains updates from
running tests/hwsim/auth_server/update.sh.
Signed-off-by: Jouni Malinen <j@w1.fi>
Comment out the call to SSL_use_RSAPrivateKey_ASN1() function when using
OpenSSL 3.0 since that function was deprecated and there does not seem
to be any significant use case for supporting DER encoded RSAPrivateKey
structure in the private key blob.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 3.0 has deprecated low-level DH/DSA functions. Convert this
loading of the dh_file parameter to use newer API.
Signed-off-by: Jouni Malinen <j@w1.fi>
This was used earlier in the wpa_supplicant configuration, but there was
no real use for that, so remove the now completely unused parameter to
simplify implementation.
Signed-off-by: Jouni Malinen <j@w1.fi>
These operations do not really have any effect since
tls_connection_set_params() is used only in the TLS client case and the
client receives the DH parameters from the server instead of local
configuration.
Signed-off-by: Jouni Malinen <j@w1.fi>
The DH file parameters are applicable only for the TLS server, so this
parameter did not really have any impact to functionality. Remove it to
get rid of useless code and confusing documentation for the network
block configuration.
Signed-off-by: Jouni Malinen <j@w1.fi>
This parameter has no impact to TLS client functionality, so these is
not really any point to maintain these test cases.
Signed-off-by: Jouni Malinen <j@w1.fi>
Use vendor specific RADIUS attributes for sending ANonce and EAPOL-Key
msg 2/4 for the wpa_psk_radius=3 case. The vendor specific attributes
for this are defined in FreeRADIUS as follows:
BEGIN-VENDOR FreeRADIUS format=Extended-Vendor-Specific-5
ATTRIBUTE FreeRADIUS-802.1X-Anonce 1 octets[32]
ATTRIBUTE FreeRADIUS-802.1X-EAPoL-Key-Msg 2 octets
END-VENDOR FreeRADIUS
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL does not support group 25, so replace these cases with a
supported group 20 to meet the real testing need here.
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL is known not to support this option, so skip it to allow rest
of the test case to be performed without known failures.
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL commit dddb60eb9700110835ff6e2b429de40a17006429 ("Make most of
crypto/x509 opaque.") broke the direct access to these variables, so use
the accessor functions instead.
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL commit dddb60eb9700110835ff6e2b429de40a17006429 ("Make most of
crypto/x509 opaque.") broke the stack-allocated version, so move to
using X509_STORE_CTX_new() to get an opaque pointer to X509_STORE_CTX
instead.
Signed-off-by: Jouni Malinen <j@w1.fi>
