Sync with wireless-next.git include/uapi/linux/nl80211.h

This brings in nl80211 definitions as of 2024-07-09.

Signed-off-by: Jouni Malinen <j@w1.fi>
This commit is contained in:
Jouni Malinen 2024-08-09 20:26:01 +03:00
parent c3beaf6b86
commit c43e1e5a5f
2 changed files with 370 additions and 168 deletions

View file

@ -186,6 +186,7 @@ static const char * nl80211_command_to_string(enum nl80211_commands cmd)
C2S(NL80211_CMD_REMOVE_LINK_STA) C2S(NL80211_CMD_REMOVE_LINK_STA)
C2S(NL80211_CMD_SET_HW_TIMESTAMP) C2S(NL80211_CMD_SET_HW_TIMESTAMP)
C2S(NL80211_CMD_LINKS_REMOVED) C2S(NL80211_CMD_LINKS_REMOVED)
C2S(NL80211_CMD_SET_TID_TO_LINK_MAPPING)
C2S(__NL80211_CMD_AFTER_LAST) C2S(__NL80211_CMD_AFTER_LAST)
} }
#undef C2S #undef C2S

View file

@ -11,7 +11,7 @@
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2008 Colin McCabe <colin@cozybit.com>
* Copyright 2015-2017 Intel Deutschland GmbH * Copyright 2015-2017 Intel Deutschland GmbH
* Copyright (C) 2018-2023 Intel Corporation * Copyright (C) 2018-2024 Intel Corporation
* *
* Permission to use, copy, modify, and/or distribute this software for any * Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above * purpose with or without fee is hereby granted, provided that the above
@ -72,7 +72,7 @@
* For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
* and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
* - a setup station entry is added, not yet authorized, without any rate * - a setup station entry is added, not yet authorized, without any rate
* or capability information, this just exists to avoid race conditions * or capability information; this just exists to avoid race conditions
* - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
* to add rate and capability information to the station and at the same * to add rate and capability information to the station and at the same
* time mark it authorized. * time mark it authorized.
@ -87,7 +87,7 @@
* DOC: Frame transmission/registration support * DOC: Frame transmission/registration support
* *
* Frame transmission and registration support exists to allow userspace * Frame transmission and registration support exists to allow userspace
* management entities such as wpa_supplicant react to management frames * management entities such as wpa_supplicant to react to management frames
* that are not being handled by the kernel. This includes, for example, * that are not being handled by the kernel. This includes, for example,
* certain classes of action frames that cannot be handled in the kernel * certain classes of action frames that cannot be handled in the kernel
* for various reasons. * for various reasons.
@ -113,7 +113,7 @@
* *
* Frame transmission allows userspace to send for example the required * Frame transmission allows userspace to send for example the required
* responses to action frames. It is subject to some sanity checking, * responses to action frames. It is subject to some sanity checking,
* but many frames can be transmitted. When a frame was transmitted, its * but many frames can be transmitted. When a frame is transmitted, its
* status is indicated to the sending socket. * status is indicated to the sending socket.
* *
* For more technical details, see the corresponding command descriptions * For more technical details, see the corresponding command descriptions
@ -123,7 +123,7 @@
/** /**
* DOC: Virtual interface / concurrency capabilities * DOC: Virtual interface / concurrency capabilities
* *
* Some devices are able to operate with virtual MACs, they can have * Some devices are able to operate with virtual MACs; they can have
* more than one virtual interface. The capability handling for this * more than one virtual interface. The capability handling for this
* is a bit complex though, as there may be a number of restrictions * is a bit complex though, as there may be a number of restrictions
* on the types of concurrency that are supported. * on the types of concurrency that are supported.
@ -135,7 +135,7 @@
* Once concurrency is desired, more attributes must be observed: * Once concurrency is desired, more attributes must be observed:
* To start with, since some interface types are purely managed in * To start with, since some interface types are purely managed in
* software, like the AP-VLAN type in mac80211 for example, there's * software, like the AP-VLAN type in mac80211 for example, there's
* an additional list of these, they can be added at any time and * an additional list of these; they can be added at any time and
* are only restricted by some semantic restrictions (e.g. AP-VLAN * are only restricted by some semantic restrictions (e.g. AP-VLAN
* cannot be added without a corresponding AP interface). This list * cannot be added without a corresponding AP interface). This list
* is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
@ -164,7 +164,7 @@
* Packet coalesce feature helps to reduce number of received interrupts * Packet coalesce feature helps to reduce number of received interrupts
* to host by buffering these packets in firmware/hardware for some * to host by buffering these packets in firmware/hardware for some
* predefined time. Received interrupt will be generated when one of the * predefined time. Received interrupt will be generated when one of the
* following events occur. * following events occurs.
* a) Expiration of hardware timer whose expiration time is set to maximum * a) Expiration of hardware timer whose expiration time is set to maximum
* coalescing delay of matching coalesce rule. * coalescing delay of matching coalesce rule.
* b) Coalescing buffer in hardware reaches its limit. * b) Coalescing buffer in hardware reaches its limit.
@ -174,7 +174,7 @@
* rule. * rule.
* a) Maximum coalescing delay * a) Maximum coalescing delay
* b) List of packet patterns which needs to be matched * b) List of packet patterns which needs to be matched
* c) Condition for coalescence. pattern 'match' or 'no match' * c) Condition for coalescence: pattern 'match' or 'no match'
* Multiple such rules can be created. * Multiple such rules can be created.
*/ */
@ -213,7 +213,7 @@
/** /**
* DOC: FILS shared key authentication offload * DOC: FILS shared key authentication offload
* *
* FILS shared key authentication offload can be advertized by drivers by * FILS shared key authentication offload can be advertised by drivers by
* setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
* FILS shared key authentication offload should be able to construct the * FILS shared key authentication offload should be able to construct the
* authentication and association frames for FILS shared key authentication and * authentication and association frames for FILS shared key authentication and
@ -239,7 +239,7 @@
* The PMKSA can be maintained in userspace persistently so that it can be used * The PMKSA can be maintained in userspace persistently so that it can be used
* later after reboots or wifi turn off/on also. * later after reboots or wifi turn off/on also.
* *
* %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
* capable AP supporting PMK caching. It specifies the scope within which the * capable AP supporting PMK caching. It specifies the scope within which the
* PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
* %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
@ -290,12 +290,12 @@
* If the configuration needs to be applied for specific peer then the MAC * If the configuration needs to be applied for specific peer then the MAC
* address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
* configuration will be applied for all the connected peers in the vif except * configuration will be applied for all the connected peers in the vif except
* any peers that have peer specific configuration for the TID by default; if * any peers that have peer-specific configuration for the TID by default; if
* the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
* will be overwritten. * will be overwritten.
* *
* All this configuration is valid only for STA's current connection * All this configuration is valid only for STA's current connection,
* i.e. the configuration will be reset to default when the STA connects back * i.e., the configuration will be reset to default when the STA connects back
* after disconnection/roaming, and this configuration will be cleared when * after disconnection/roaming, and this configuration will be cleared when
* the interface goes down. * the interface goes down.
*/ */
@ -413,8 +413,8 @@
* are like for %NL80211_CMD_SET_BEACON, and additionally parameters that * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
* do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
* %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
* %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
* %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@ -438,7 +438,8 @@
* %NL80211_ATTR_REASON_CODE can optionally be used to specify which type * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
* of disconnection indication should be sent to the station * of disconnection indication should be sent to the station
* (Deauthentication or Disassociation frame and reason code for that * (Deauthentication or Disassociation frame and reason code for that
* frame). * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
* stations connected and using at least that link as one of its links.
* *
* @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
* destination %NL80211_ATTR_MAC on the interface identified by * destination %NL80211_ATTR_MAC on the interface identified by
@ -450,11 +451,6 @@
* %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
* @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
* %NL80211_ATTR_MAC. * %NL80211_ATTR_MAC.
* @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
* interface identified by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
* or, if no MAC address given, all mesh paths, on the interface identified
* by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
* %NL80211_ATTR_IFINDEX. * %NL80211_ATTR_IFINDEX.
* *
@ -521,7 +517,7 @@
* %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
* not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
* scheduled scan will run in an infinite loop with the specified interval. * scheduled scan will run in an infinite loop with the specified interval.
* These attributes are mutually exculsive, * These attributes are mutually exclusive,
* i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
* NL80211_ATTR_SCHED_SCAN_PLANS is defined. * NL80211_ATTR_SCHED_SCAN_PLANS is defined.
* If for some reason scheduled scan is aborted by the driver, all scan * If for some reason scheduled scan is aborted by the driver, all scan
@ -552,7 +548,7 @@
* %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
* is brought down while a scheduled scan was running. * is brought down while a scheduled scan was running.
* *
* @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
* or noise level * or noise level
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
* NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
@ -563,12 +559,13 @@
* using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
* %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
* authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
* advertized by a FILS capable AP identifying the scope of PMKSA in an * advertised by a FILS capable AP identifying the scope of PMKSA in an
* ESS. * ESS.
* @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
* (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
* %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
* authentication. * authentication. Additionally in case of SAE offload and OWE offloads
* PMKSA entry can be deleted using %NL80211_ATTR_SSID.
* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
* *
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
@ -607,7 +604,7 @@
* BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
* the SSID (mainly for association, but is included in authentication * the SSID (mainly for association, but is included in authentication
* request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
* %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
* channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
* authentication type. %NL80211_ATTR_IE is used to define IEs * authentication type. %NL80211_ATTR_IE is used to define IEs
* (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
@ -816,7 +813,7 @@
* reached. * reached.
* @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
* and the attributes determining channel width) the given interface * and the attributes determining channel width) the given interface
* (identifed by %NL80211_ATTR_IFINDEX) shall operate on. * (identified by %NL80211_ATTR_IFINDEX) shall operate on.
* In case multiple channels are supported by the device, the mechanism * In case multiple channels are supported by the device, the mechanism
* with which it switches channels is implementation-defined. * with which it switches channels is implementation-defined.
* When a monitor interface is given, it can only switch channel while * When a monitor interface is given, it can only switch channel while
@ -888,7 +885,7 @@
* inform userspace of the new replay counter. * inform userspace of the new replay counter.
* *
* @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
* of PMKSA caching dandidates. * of PMKSA caching candidates.
* *
* @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
* In addition, this can be used as an event to request userspace to take * In addition, this can be used as an event to request userspace to take
@ -924,7 +921,7 @@
* *
* @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
* by sending a null data frame to it and reporting when the frame is * by sending a null data frame to it and reporting when the frame is
* acknowleged. This is used to allow timing out inactive clients. Uses * acknowledged. This is used to allow timing out inactive clients. Uses
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
* direct reply with an %NL80211_ATTR_COOKIE that is later used to match * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
* up the event with the request. The event includes the same data and * up the event with the request. The event includes the same data and
@ -1118,7 +1115,7 @@
* current configuration is not changed. If it is present but * current configuration is not changed. If it is present but
* set to zero, the configuration is changed to don't-care * set to zero, the configuration is changed to don't-care
* (i.e. the device can decide what to do). * (i.e. the device can decide what to do).
* @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
* This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
* %NL80211_ATTR_COOKIE. * %NL80211_ATTR_COOKIE.
* *
@ -1135,11 +1132,15 @@
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
* configured PMK for the authenticator address identified by * configured PMK for the authenticator address identified by
* %NL80211_ATTR_MAC. * %NL80211_ATTR_MAC.
* @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
* completed successfully. Drivers that support 4 way handshake offload * open for regular data traffic. For STA/P2P-client, this event is sent
* should send this event after indicating 802.1X FT assocation with * with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
* %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT * client MAC address.
* should be indicated instead. * Drivers that support 4 way handshake offload should send this event for
* STA/P2P-client after successful 4-way HS or after 802.1X FT following
* NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
* handshake offload should send this event on successful completion of
* 4-way handshake with the peer (STA/P2P-client).
* @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
* and RX notification. This command is used both as a request to transmit * and RX notification. This command is used both as a request to transmit
* a control port frame and as a notification that a control port frame * a control port frame and as a notification that a control port frame
@ -1323,6 +1324,11 @@
* Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
* information about the removed STA MLD setup links. * information about the removed STA MLD setup links.
* *
* @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
* non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
* %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
* TID to Link mapping for downlink/uplink traffic.
*
* @NL80211_CMD_MAX: highest used command number * @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use * @__NL80211_CMD_AFTER_LAST: internal use
*/ */
@ -1578,6 +1584,8 @@ enum nl80211_commands {
NL80211_CMD_LINKS_REMOVED, NL80211_CMD_LINKS_REMOVED,
NL80211_CMD_SET_TID_TO_LINK_MAPPING,
/* add new commands above here */ /* add new commands above here */
/* used to define NL80211_CMD_MAX below */ /* used to define NL80211_CMD_MAX below */
@ -1835,7 +1843,7 @@ enum nl80211_commands {
* using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
* to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
* flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
* frames are not forwared over the control port. * frames are not forwarded over the control port.
* *
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this. * We recommend using nested, driver-specific attributes within this.
@ -1849,12 +1857,6 @@ enum nl80211_commands {
* that protected APs should be used. This is also used with NEW_BEACON to * that protected APs should be used. This is also used with NEW_BEACON to
* indicate that the BSS is to use protection. * indicate that the BSS is to use protection.
* *
* @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
* to indicate which unicast key ciphers will be used with the connection
* (an array of u32).
* @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
* indicate which group key cipher will be used with the connection (a
* u32).
* @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
* indicate which WPA version(s) the AP we want to associate with is using * indicate which WPA version(s) the AP we want to associate with is using
* (a u32 with flags from &enum nl80211_wpa_versions). * (a u32 with flags from &enum nl80211_wpa_versions).
@ -1885,6 +1887,7 @@ enum nl80211_commands {
* with %NL80211_KEY_* sub-attributes * with %NL80211_KEY_* sub-attributes
* *
* @NL80211_ATTR_PID: Process ID of a network namespace. * @NL80211_ATTR_PID: Process ID of a network namespace.
* @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
* *
* @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
* dumps. This number increases whenever the object list being * dumps. This number increases whenever the object list being
@ -1939,6 +1942,7 @@ enum nl80211_commands {
* *
* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
* acknowledged by the recipient. * acknowledged by the recipient.
* @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
* *
* @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
* *
@ -1972,10 +1976,10 @@ enum nl80211_commands {
* bit. Depending on which antennas are selected in the bitmap, 802.11n * bit. Depending on which antennas are selected in the bitmap, 802.11n
* drivers can derive which chainmasks to use (if all antennas belonging to * drivers can derive which chainmasks to use (if all antennas belonging to
* a particular chain are disabled this chain should be disabled) and if * a particular chain are disabled this chain should be disabled) and if
* a chain has diversity antennas wether diversity should be used or not. * a chain has diversity antennas whether diversity should be used or not.
* HT capabilities (STBC, TX Beamforming, Antenna selection) can be * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
* derived from the available chains after applying the antenna mask. * derived from the available chains after applying the antenna mask.
* Non-802.11n drivers can derive wether to use diversity or not. * Non-802.11n drivers can derive whether to use diversity or not.
* Drivers may reject configurations or RX/TX mask combinations they cannot * Drivers may reject configurations or RX/TX mask combinations they cannot
* support by returning -EINVAL. * support by returning -EINVAL.
* *
@ -2048,6 +2052,10 @@ enum nl80211_commands {
* @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
* interface combinations. In each nested item, it contains attributes * interface combinations. In each nested item, it contains attributes
* defined in &enum nl80211_if_combination_attrs. * defined in &enum nl80211_if_combination_attrs.
* If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
* this attribute contains the interface combinations of the first radio.
* See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
* combinations for the sum of all radios.
* @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
* %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
* are managed in software: interfaces of these types aren't subject to * are managed in software: interfaces of these types aren't subject to
@ -2136,6 +2144,9 @@ enum nl80211_commands {
* @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
* this feature during association. This is a flag attribute. * this feature during association. This is a flag attribute.
* Currently only supported in mac80211 drivers. * Currently only supported in mac80211 drivers.
* @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
* this feature during association. This is a flag attribute.
* Currently only supported in mac80211 drivers.
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
* ATTR_HT_CAPABILITY to which attention should be paid. * ATTR_HT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature. * Currently, only mac80211 NICs support this feature.
@ -2145,6 +2156,12 @@ enum nl80211_commands {
* All values are treated as suggestions and may be ignored * All values are treated as suggestions and may be ignored
* by the driver as required. The actual values may be seen in * by the driver as required. The actual values may be seen in
* the station debugfs ht_caps file. * the station debugfs ht_caps file.
* @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
* ATTR_VHT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature.
* All values are treated as suggestions and may be ignored
* by the driver as required. The actual values may be seen in
* the station debugfs vht_caps file.
* *
* @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
* abides to when initiating radiation on DFS channels. A country maps * abides to when initiating radiation on DFS channels. A country maps
@ -2403,7 +2420,7 @@ enum nl80211_commands {
* scheduled scan is started. Or the delay before a WoWLAN * scheduled scan is started. Or the delay before a WoWLAN
* net-detect scan is started, counting from the moment the * net-detect scan is started, counting from the moment the
* system is suspended. This value is a u32, in seconds. * system is suspended. This value is a u32, in seconds.
*
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
* is operating in an indoor environment. * is operating in an indoor environment.
* *
@ -2545,7 +2562,7 @@ enum nl80211_commands {
* from successful FILS authentication and is used with * from successful FILS authentication and is used with
* %NL80211_CMD_CONNECT. * %NL80211_CMD_CONNECT.
* *
* @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
* identifying the scope of PMKSAs. This is used with * identifying the scope of PMKSAs. This is used with
* @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
* *
@ -2826,6 +2843,31 @@ enum nl80211_commands {
* @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
* disabled. * disabled.
* *
* @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
* include BSSes that can only be used in restricted scenarios and/or
* cannot be used at all.
*
* @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
* link mapping. The length is 8 * sizeof(u16). For each TID the link
* mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
* in Draft P802.11be_D4.0.
* @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
* link mapping. The length is 8 * sizeof(u16). For each TID the link
* mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
* in Draft P802.11be_D4.0.
*
* @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
* %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
* are used on this connection
*
* @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
* belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
*
* @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
* supported interface combinations for all radios combined. In each
* nested item, it contains attributes defined in
* &enum nl80211_if_combination_attrs.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined * @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use * @__NL80211_ATTR_AFTER_LAST: internal use
@ -3364,6 +3406,16 @@ enum nl80211_attrs {
NL80211_ATTR_MLO_LINK_DISABLED, NL80211_ATTR_MLO_LINK_DISABLED,
NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
NL80211_ATTR_MLO_TTLM_DLINK,
NL80211_ATTR_MLO_TTLM_ULINK,
NL80211_ATTR_ASSOC_SPP_AMSDU,
NL80211_ATTR_WIPHY_RADIOS,
NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
/* add attributes here, update the policy in nl80211.c */ /* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST, __NL80211_ATTR_AFTER_LAST,
@ -3504,6 +3556,7 @@ enum nl80211_iftype {
* @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
* that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
* previously added station into associated state * previously added station into associated state
* @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use * @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/ */
@ -3516,6 +3569,7 @@ enum nl80211_sta_flags {
NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_AUTHENTICATED,
NL80211_STA_FLAG_TDLS_PEER, NL80211_STA_FLAG_TDLS_PEER,
NL80211_STA_FLAG_ASSOCIATED, NL80211_STA_FLAG_ASSOCIATED,
NL80211_STA_FLAG_SPP_AMSDU,
/* keep last */ /* keep last */
__NL80211_STA_FLAG_AFTER_LAST, __NL80211_STA_FLAG_AFTER_LAST,
@ -3526,7 +3580,7 @@ enum nl80211_sta_flags {
* enum nl80211_sta_p2p_ps_status - station support of P2P PS * enum nl80211_sta_p2p_ps_status - station support of P2P PS
* *
* @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
* @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
* @NUM_NL80211_P2P_PS_STATUS: number of values * @NUM_NL80211_P2P_PS_STATUS: number of values
*/ */
enum nl80211_sta_p2p_ps_status { enum nl80211_sta_p2p_ps_status {
@ -3564,9 +3618,9 @@ enum nl80211_he_gi {
/** /**
* enum nl80211_he_ltf - HE long training field * enum nl80211_he_ltf - HE long training field
* @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
* @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
* @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
*/ */
enum nl80211_he_ltf { enum nl80211_he_ltf {
NL80211_RATE_INFO_HE_1XLTF, NL80211_RATE_INFO_HE_1XLTF,
@ -3681,7 +3735,7 @@ enum nl80211_eht_ru_alloc {
* @NL80211_RATE_INFO_HE_GI: HE guard interval identifier * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
* (u8, see &enum nl80211_he_gi) * (u8, see &enum nl80211_he_gi)
* @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
* @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
* non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
* @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
* @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@ -3813,8 +3867,8 @@ enum nl80211_sta_bss_param {
* Contains a nested array of signal strength attributes (u8, dBm) * Contains a nested array of signal strength attributes (u8, dBm)
* @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL. * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
* @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
* 802.11 header (u32, kbps) * the 802.11 header (u32, kbps)
* @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
* (u64) * (u64)
* @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@ -4140,7 +4194,7 @@ enum nl80211_band_attr {
* @NL80211_WMMR_CW_MAX: Maximum contention window slot. * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
* @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
* @NL80211_WMMR_TXOP: Maximum allowed tx operation time. * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
* @nl80211_WMMR_MAX: highest possible wmm rule. * @NL80211_WMMR_MAX: highest possible wmm rule.
* @__NL80211_WMMR_LAST: Internal use. * @__NL80211_WMMR_LAST: Internal use.
*/ */
enum nl80211_wmm_rule { enum nl80211_wmm_rule {
@ -4164,13 +4218,14 @@ enum nl80211_wmm_rule {
* @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
* are permitted on this channel, this includes sending probe * are permitted on this channel, this includes sending probe
* requests, or modes of operation that require beaconing. * requests, or modes of operation that require beaconing.
* @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain. * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
* (100 * dBm). * (100 * dBm).
* @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
* (enum nl80211_dfs_state) * (enum nl80211_dfs_state)
* @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
* this channel is in this DFS state. * this channel is in this DFS state.
* @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
* channel as the control channel * channel as the control channel
@ -4226,6 +4281,19 @@ enum nl80211_wmm_rule {
* in current regulatory domain. * in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
* is allowed on this channel in current regulatory domain. * is allowed on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
* allowed for peer-to-peer or adhoc communication under the control
* of a DFS master which operates on the same channel (FCC-594280 D01
* Section B.3). Should be used together with %NL80211_RRF_DFS only.
* @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
* not allowed using this channel
* @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
* not allowed using this channel
* @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
* mode despite other (regulatory) restrictions, even if the channel is
* otherwise completely disabled.
* @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
* very low power (VLP) AP, despite being NO_IR.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined * currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@ -4265,6 +4333,11 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_320MHZ, NL80211_FREQUENCY_ATTR_NO_320MHZ,
NL80211_FREQUENCY_ATTR_NO_EHT, NL80211_FREQUENCY_ATTR_NO_EHT,
NL80211_FREQUENCY_ATTR_PSD, NL80211_FREQUENCY_ATTR_PSD,
NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
NL80211_FREQUENCY_ATTR_CAN_MONITOR,
NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
/* keep last */ /* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST, __NL80211_FREQUENCY_ATTR_AFTER_LAST,
@ -4277,6 +4350,10 @@ enum nl80211_frequency_attr {
#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR
#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
NL80211_FREQUENCY_ATTR_IR_CONCURRENT NL80211_FREQUENCY_ATTR_IR_CONCURRENT
#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
/** /**
* enum nl80211_bitrate_attr - bitrate attributes * enum nl80211_bitrate_attr - bitrate attributes
@ -4299,7 +4376,7 @@ enum nl80211_bitrate_attr {
}; };
/** /**
* enum nl80211_initiator - Indicates the initiator of a reg domain request * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
* @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
* regulatory domain. * regulatory domain.
* @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
@ -4414,14 +4491,7 @@ enum nl80211_reg_rule_attr {
* value as specified by &struct nl80211_bss_select_rssi_adjust. * value as specified by &struct nl80211_bss_select_rssi_adjust.
* @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
* (this cannot be used together with SSID). * (this cannot be used together with SSID).
* @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
* band specific minimum rssi thresholds for the bands defined in
* enum nl80211_band. The minimum rssi threshold value(s32) specific to a
* band shall be encapsulated in attribute with type value equals to one
* of the NL80211_BAND_* defined in enum nl80211_band. For example, the
* minimum rssi threshold value for 2.4GHZ band shall be encapsulated
* within an attribute of type NL80211_BAND_2GHZ. And one or more of such
* attributes will be nested within this attribute.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined * attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@ -4434,7 +4504,7 @@ enum nl80211_sched_scan_match_attr {
NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
/* keep last */ /* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@ -4458,6 +4528,7 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
* this includes probe requests or modes of operation that require * this includes probe requests or modes of operation that require
* beaconing. * beaconing.
* @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross * base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges. * multiple contiguous/overlapping frequency ranges.
@ -4470,6 +4541,14 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
* @NL80211_RRF_NO_EHT: EHT operation not allowed * @NL80211_RRF_NO_EHT: EHT operation not allowed
* @NL80211_RRF_PSD: Ruleset has power spectral density value * @NL80211_RRF_PSD: Ruleset has power spectral density value
* @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
* peer-to-peer or adhoc communication under the control of a DFS master
* which operates on the same channel (FCC-594280 D01 Section B.3).
* Should be used together with %NL80211_RRF_DFS only.
* @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
* @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
* @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
* despite NO_IR configuration.
*/ */
enum nl80211_reg_rule_flags { enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0, NL80211_RRF_NO_OFDM = 1<<0,
@ -4491,6 +4570,10 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_NO_320MHZ = 1<<18, NL80211_RRF_NO_320MHZ = 1<<18,
NL80211_RRF_NO_EHT = 1<<19, NL80211_RRF_NO_EHT = 1<<19,
NL80211_RRF_PSD = 1<<20, NL80211_RRF_PSD = 1<<20,
NL80211_RRF_DFS_CONCURRENT = 1<<21,
NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22,
NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23,
NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24,
}; };
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
@ -4499,6 +4582,8 @@ enum nl80211_reg_rule_flags {
#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
NL80211_RRF_NO_HT40PLUS) NL80211_RRF_NO_HT40PLUS)
#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT
#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT
#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT
/* For backport compatibility with older userspace */ /* For backport compatibility with older userspace */
#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@ -4645,8 +4730,8 @@ enum nl80211_mntr_flags {
* alternate between Active and Doze states, but may not wake up * alternate between Active and Doze states, but may not wake up
* for neighbor's beacons. * for neighbor's beacons.
* *
* @__NL80211_MESH_POWER_AFTER_LAST - internal use * @__NL80211_MESH_POWER_AFTER_LAST: internal use
* @NL80211_MESH_POWER_MAX - highest possible power save level * @NL80211_MESH_POWER_MAX: highest possible power save level
*/ */
enum nl80211_mesh_power_mode { enum nl80211_mesh_power_mode {
@ -5027,6 +5112,36 @@ enum nl80211_bss_scan_width {
NL80211_BSS_CHAN_WIDTH_2, NL80211_BSS_CHAN_WIDTH_2,
}; };
/**
* enum nl80211_bss_use_for - bitmap indicating possible BSS use
* @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
* including IBSS/MBSS depending on the type.
* @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
* MLO connection. Note that for an MLO connection, all links including
* the assoc link must have this flag set, and the assoc link must
* additionally have %NL80211_BSS_USE_FOR_NORMAL set.
*/
enum nl80211_bss_use_for {
NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
};
/**
* enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
* BSS isn't possible
* @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
* supported by the device, and this BSS entry represents one.
* @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
* the AP power type (SP, VLP, AP) that the AP uses.
*/
enum nl80211_bss_cannot_use_reasons {
NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0,
NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1,
};
#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
/** /**
* enum nl80211_bss - netlink attributes for a BSS * enum nl80211_bss - netlink attributes for a BSS
* *
@ -5079,6 +5194,14 @@ enum nl80211_bss_scan_width {
* @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
* @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
* @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
* @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
* used for, see &enum nl80211_bss_use_for.
* @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
* be used for all or some of the possible uses by the device reporting it,
* even though its presence was detected.
* This is a u64 attribute containing a bitmap of values from
* &enum nl80211_cannot_use_reasons, note that the attribute may be missing
* if no reasons are specified.
* @__NL80211_BSS_AFTER_LAST: internal * @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute * @NL80211_BSS_MAX: highest BSS attribute
*/ */
@ -5106,6 +5229,8 @@ enum nl80211_bss {
NL80211_BSS_FREQUENCY_OFFSET, NL80211_BSS_FREQUENCY_OFFSET,
NL80211_BSS_MLO_LINK_ID, NL80211_BSS_MLO_LINK_ID,
NL80211_BSS_MLD_ADDR, NL80211_BSS_MLD_ADDR,
NL80211_BSS_USE_FOR,
NL80211_BSS_CANNOT_USE_REASONS,
/* keep last */ /* keep last */
__NL80211_BSS_AFTER_LAST, __NL80211_BSS_AFTER_LAST,
@ -5454,7 +5579,7 @@ enum nl80211_tx_rate_setting {
* (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
* @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
* per peer instead. * per peer instead.
* @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
* that the new configuration overrides all previous peer * that the new configuration overrides all previous peer
* configurations, otherwise previous peer specific configurations * configurations, otherwise previous peer specific configurations
* should be left untouched. * should be left untouched.
@ -5626,7 +5751,7 @@ struct nl80211_pattern_support {
* "TCP connection wakeup" for more details. This is a nested attribute * "TCP connection wakeup" for more details. This is a nested attribute
* containing the exact information for establishing and keeping alive * containing the exact information for establishing and keeping alive
* the TCP connection. * the TCP connection.
* @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
* wakeup packet was received on the TCP connection * wakeup packet was received on the TCP connection
* @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
* TCP connection was lost or failed to be established * TCP connection was lost or failed to be established
@ -5655,6 +5780,8 @@ struct nl80211_pattern_support {
* %NL80211_ATTR_SCAN_FREQUENCIES contains more than one * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
* frequency, it means that the match occurred in more than one * frequency, it means that the match occurred in more than one
* channel. * channel.
* @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
* Wake up happened due to unprotected deauth or disassoc frame in MFP.
* @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
* @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
* *
@ -5682,6 +5809,7 @@ enum nl80211_wowlan_triggers {
NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
NL80211_WOWLAN_TRIG_NET_DETECT, NL80211_WOWLAN_TRIG_NET_DETECT,
NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
/* keep last */ /* keep last */
NUM_NL80211_WOWLAN_TRIG, NUM_NL80211_WOWLAN_TRIG,
@ -5837,7 +5965,7 @@ enum nl80211_attr_coalesce_rule {
/** /**
* enum nl80211_coalesce_condition - coalesce rule conditions * enum nl80211_coalesce_condition - coalesce rule conditions
* @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
* in a rule are matched. * in a rule are matched.
* @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
* in a rule are not matched. * in a rule are not matched.
@ -5936,7 +6064,7 @@ enum nl80211_if_combination_attrs {
* enum nl80211_plink_state - state of a mesh peer link finite state machine * enum nl80211_plink_state - state of a mesh peer link finite state machine
* *
* @NL80211_PLINK_LISTEN: initial state, considered the implicit * @NL80211_PLINK_LISTEN: initial state, considered the implicit
* state of non existent mesh peer links * state of non-existent mesh peer links
* @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
* this mesh peer * this mesh peer
* @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@ -5972,7 +6100,7 @@ enum nl80211_plink_state {
* @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
* @NUM_NL80211_PLINK_ACTIONS: number of possible actions * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
*/ */
enum plink_actions { enum nl80211_plink_action {
NL80211_PLINK_ACTION_NO_ACTION, NL80211_PLINK_ACTION_NO_ACTION,
NL80211_PLINK_ACTION_OPEN, NL80211_PLINK_ACTION_OPEN,
NL80211_PLINK_ACTION_BLOCK, NL80211_PLINK_ACTION_BLOCK,
@ -6229,7 +6357,7 @@ enum nl80211_feature_flags {
* request to use RRM (see %NL80211_ATTR_USE_RRM) with * request to use RRM (see %NL80211_ATTR_USE_RRM) with
* %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
* the ASSOC_REQ_USE_RRM flag in the association request even if * the ASSOC_REQ_USE_RRM flag in the association request even if
* NL80211_FEATURE_QUIET is not advertized. * NL80211_FEATURE_QUIET is not advertised.
* @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
* sniffer which means that it can be configured to hear packets from * sniffer which means that it can be configured to hear packets from
* certain groups which can be configured by the * certain groups which can be configured by the
@ -6241,13 +6369,15 @@ enum nl80211_feature_flags {
* the BSS that the interface that requested the scan is connected to * the BSS that the interface that requested the scan is connected to
* (if available). * (if available).
* @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
* time the last beacon/probe was received. The time is the TSF of the * time the last beacon/probe was received. For a non-MLO connection, the
* BSS that the interface that requested the scan is connected to * time is the TSF of the BSS that the interface that requested the scan is
* (if available). * connected to (if available). For an MLO connection, the time is the TSF
* of the BSS corresponding with link ID specified in the scan request (if
* specified).
* @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
* channel dwell time. * channel dwell time.
* @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
* configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. * configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
* @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
* configuration (AP/mesh) with HT rates. * configuration (AP/mesh) with HT rates.
* @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
@ -6297,6 +6427,7 @@ enum nl80211_feature_flags {
* receiving control port frames over nl80211 instead of the netdevice. * receiving control port frames over nl80211 instead of the netdevice.
* @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
* (average) ACK signal strength reporting. * (average) ACK signal strength reporting.
* @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
* @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
* TXQs. * TXQs.
* @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@ -6321,8 +6452,7 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
* (set/del PMKSA operations) in AP mode. * (set/del PMKSA operations) in AP mode.
* *
* @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
* filtering of sched scan results using band specific RSSI thresholds.
* *
* @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
* to a station. * to a station.
@ -6426,6 +6556,16 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
* handling in AP mode. * handling in AP mode.
* *
* @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
* ad hoc operation on DFS channels under the control of a concurrent
* DFS master on the same channel as described in FCC-594280 D01
* (Section B.3). This, for example, allows P2P GO and P2P clients to
* operate on DFS channels as long as there's a concurrent BSS connection.
*
* @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
* (signaling and payload protected) A-MSDUs and this shall be advertised
* in the RSNXE.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features. * @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index. * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/ */
@ -6467,7 +6607,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
NL80211_EXT_FEATURE_AP_PMKSA_CACHING, NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_EXT_KEY_ID,
NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_STA_TX_PWR,
NL80211_EXT_FEATURE_SAE_OFFLOAD, NL80211_EXT_FEATURE_SAE_OFFLOAD,
@ -6499,6 +6639,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
NL80211_EXT_FEATURE_OWE_OFFLOAD, NL80211_EXT_FEATURE_OWE_OFFLOAD,
NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
NL80211_EXT_FEATURE_DFS_CONCURRENT,
NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
/* add new features before the definition below */ /* add new features before the definition below */
NUM_NL80211_EXT_FEATURES, NUM_NL80211_EXT_FEATURES,
@ -6583,7 +6725,7 @@ enum nl80211_timeout_reason {
* request parameters IE in the probe request * request parameters IE in the probe request
* @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
* rate of at least 5.5M. In case non OCE AP is discovered in the channel, * rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
* only the first probe req in the channel will be sent in high rate. * only the first probe req in the channel will be sent in high rate.
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
* tx deferral (dot11FILSProbeDelay shall be set to 15ms) * tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@ -6619,7 +6761,7 @@ enum nl80211_timeout_reason {
* received on the 2.4/5 GHz channels to actively scan only the 6GHz * received on the 2.4/5 GHz channels to actively scan only the 6GHz
* channels on which APs are expected to be found. Note that when not set, * channels on which APs are expected to be found. Note that when not set,
* the scan logic would scan all 6GHz channels, but since transmission of * the scan logic would scan all 6GHz channels, but since transmission of
* probe requests on non PSC channels is limited, it is highly likely that * probe requests on non-PSC channels is limited, it is highly likely that
* these channels would passively be scanned. Also note that when the flag * these channels would passively be scanned. Also note that when the flag
* is set, in addition to the colocated APs, PSC channels would also be * is set, in addition to the colocated APs, PSC channels would also be
* scanned if the user space has asked for it. * scanned if the user space has asked for it.
@ -6669,6 +6811,8 @@ enum nl80211_acl_policy {
* @NL80211_SMPS_STATIC: static SMPS (use a single antenna) * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
* @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
* turn on other antennas after CTS/RTS). * turn on other antennas after CTS/RTS).
* @__NL80211_SMPS_AFTER_LAST: internal
* @NL80211_SMPS_MAX: highest used enumeration
*/ */
enum nl80211_smps_mode { enum nl80211_smps_mode {
NL80211_SMPS_OFF, NL80211_SMPS_OFF,
@ -6890,6 +7034,8 @@ enum nl80211_bss_select_attr {
* @NL80211_NAN_FUNC_PUBLISH: function is publish * @NL80211_NAN_FUNC_PUBLISH: function is publish
* @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
* @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
* @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
* @NL80211_NAN_FUNC_MAX_TYPE: internal use
*/ */
enum nl80211_nan_function_type { enum nl80211_nan_function_type {
NL80211_NAN_FUNC_PUBLISH, NL80211_NAN_FUNC_PUBLISH,
@ -6951,7 +7097,7 @@ enum nl80211_nan_func_term_reason {
* The instance ID for the follow up Service Discovery Frame. This is u8. * The instance ID for the follow up Service Discovery Frame. This is u8.
* @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
* is follow up. This is a u8. * is follow up. This is a u8.
* The requestor instance ID for the follow up Service Discovery Frame. * The requester instance ID for the follow up Service Discovery Frame.
* @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
* follow up Service Discovery Frame. This is a binary attribute. * follow up Service Discovery Frame. This is a binary attribute.
* @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
@ -7050,7 +7196,7 @@ enum nl80211_nan_match_attributes {
}; };
/** /**
* nl80211_external_auth_action - Action to perform with external * enum nl80211_external_auth_action - Action to perform with external
* authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
* @NL80211_EXTERNAL_AUTH_START: Start the authentication. * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
* @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@ -7068,7 +7214,7 @@ enum nl80211_external_auth_action {
* @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
* (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
* i.e. starting with the measurement token * i.e. starting with the measurement token
* @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
* (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
* i.e. starting with the measurement token * i.e. starting with the measurement token
* @__NL80211_FTM_RESP_ATTR_LAST: Internal * @__NL80211_FTM_RESP_ATTR_LAST: Internal
@ -7341,7 +7487,7 @@ enum nl80211_peer_measurement_attrs {
* @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
* trigger based ranging measurement is supported * trigger based ranging measurement is supported
* @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
* if non trigger based ranging measurement is supported * if non-trigger-based ranging measurement is supported
* *
* @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@ -7395,7 +7541,7 @@ enum nl80211_peer_measurement_ftm_capa {
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
* ranging will be used. * ranging will be used.
* @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
* ranging measurement (flag) * ranging measurement (flag)
* This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
* mutually exclusive. * mutually exclusive.
@ -7473,7 +7619,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
* transmitted (u32, optional) * transmitted (u32, optional)
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
* that were acknowleged (u32, optional) * that were acknowledged (u32, optional)
* @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
* busy peer (u32, seconds) * busy peer (u32, seconds)
* @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
@ -7711,6 +7857,7 @@ enum nl80211_sae_pwe_mechanism {
* *
* @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
* *
* @NUM_NL80211_SAR_TYPE: internal
*/ */
enum nl80211_sar_type { enum nl80211_sar_type {
NL80211_SAR_TYPE_POWER, NL80211_SAR_TYPE_POWER,
@ -7724,6 +7871,8 @@ enum nl80211_sar_type {
/** /**
* enum nl80211_sar_attrs - Attributes for SAR spec * enum nl80211_sar_attrs - Attributes for SAR spec
* *
* @__NL80211_SAR_ATTR_INVALID: Invalid
*
* @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
* *
* @NL80211_SAR_ATTR_SPECS: Nested array of SAR power * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@ -7755,6 +7904,8 @@ enum nl80211_sar_attrs {
/** /**
* enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
* *
* @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
*
* @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
* power limit value in units of 0.25 dBm if type is * power limit value in units of 0.25 dBm if type is
* NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
@ -7869,4 +8020,54 @@ enum nl80211_ap_settings_flags {
NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
}; };
/**
* enum nl80211_wiphy_radio_attrs - wiphy radio attributes
*
* @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
*
* @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)
* @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this
* radio. Attribute may be present multiple times.
* @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface
* combination for this radio. Attribute may be present multiple times
* and contains attributes defined in &enum nl80211_if_combination_attrs.
*
* @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
* @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
*/
enum nl80211_wiphy_radio_attrs {
__NL80211_WIPHY_RADIO_ATTR_INVALID,
NL80211_WIPHY_RADIO_ATTR_INDEX,
NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,
NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,
/* keep last */
__NL80211_WIPHY_RADIO_ATTR_LAST,
NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
};
/**
* enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
*
* @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
*
* @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).
* The unit is kHz.
* @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).
* The unit is kHz.
*
* @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
* @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
*/
enum nl80211_wiphy_radio_freq_range {
__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
NL80211_WIPHY_RADIO_FREQ_ATTR_START,
NL80211_WIPHY_RADIO_FREQ_ATTR_END,
__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
};
#endif /* __LINUX_NL80211_H */ #endif /* __LINUX_NL80211_H */