diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index ee0ea837f..903207067 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -186,6 +186,7 @@ static const char * nl80211_command_to_string(enum nl80211_commands cmd)
 	C2S(NL80211_CMD_REMOVE_LINK_STA)
 	C2S(NL80211_CMD_SET_HW_TIMESTAMP)
 	C2S(NL80211_CMD_LINKS_REMOVED)
+	C2S(NL80211_CMD_SET_TID_TO_LINK_MAPPING)
 	C2S(__NL80211_CMD_AFTER_LAST)
 	}
 #undef C2S
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index dced2c49d..f97f5adc8 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2023 Intel Corporation
+ * Copyright (C) 2018-2024 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -72,7 +72,7 @@
  * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
  * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
  *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
+ *    or capability information; this just exists to avoid race conditions
  *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
  *    to add rate and capability information to the station and at the same
  *    time mark it authorized.
@@ -87,7 +87,7 @@
  * DOC: Frame transmission/registration support
  *
  * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
+ * management entities such as wpa_supplicant to react to management frames
  * that are not being handled by the kernel. This includes, for example,
  * certain classes of action frames that cannot be handled in the kernel
  * for various reasons.
@@ -113,7 +113,7 @@
  *
  * Frame transmission allows userspace to send for example the required
  * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
+ * but many frames can be transmitted. When a frame is transmitted, its
  * status is indicated to the sending socket.
  *
  * For more technical details, see the corresponding command descriptions
@@ -123,7 +123,7 @@
 /**
  * DOC: Virtual interface / concurrency capabilities
  *
- * Some devices are able to operate with virtual MACs, they can have
+ * Some devices are able to operate with virtual MACs; they can have
  * more than one virtual interface. The capability handling for this
  * is a bit complex though, as there may be a number of restrictions
  * on the types of concurrency that are supported.
@@ -135,7 +135,7 @@
  * Once concurrency is desired, more attributes must be observed:
  * To start with, since some interface types are purely managed in
  * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
+ * an additional list of these; they can be added at any time and
  * are only restricted by some semantic restrictions (e.g. AP-VLAN
  * cannot be added without a corresponding AP interface). This list
  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
@@ -164,7 +164,7 @@
  * Packet coalesce feature helps to reduce number of received interrupts
  * to host by buffering these packets in firmware/hardware for some
  * predefined time. Received interrupt will be generated when one of the
- * following events occur.
+ * following events occurs.
  * a) Expiration of hardware timer whose expiration time is set to maximum
  * coalescing delay of matching coalesce rule.
  * b) Coalescing buffer in hardware reaches its limit.
@@ -174,7 +174,7 @@
  * rule.
  * a) Maximum coalescing delay
  * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
+ * c) Condition for coalescence: pattern 'match' or 'no match'
  * Multiple such rules can be created.
  */
 
@@ -213,7 +213,7 @@
 /**
  * DOC: FILS shared key authentication offload
  *
- * FILS shared key authentication offload can be advertized by drivers by
+ * FILS shared key authentication offload can be advertised by drivers by
  * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
@@ -239,7 +239,7 @@
  * The PMKSA can be maintained in userspace persistently so that it can be used
  * later after reboots or wifi turn off/on also.
  *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
  * capable AP supporting PMK caching. It specifies the scope within which the
  * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
  * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
@@ -290,12 +290,12 @@
  * If the configuration needs to be applied for specific peer then the MAC
  * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
  * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * any peers that have peer-specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
  * will be overwritten.
  *
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
+ * All this configuration is valid only for STA's current connection,
+ * i.e., the configuration will be reset to default when the STA connects back
  * after disconnection/roaming, and this configuration will be cleared when
  * the interface goes down.
  */
@@ -413,8 +413,8 @@
  *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
  *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
  *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
  *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@@ -438,23 +438,19 @@
  *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
  *	of disconnection indication should be sent to the station
  *	(Deauthentication or Disassociation frame and reason code for that
- *	frame).
+ *	frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
+ *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
+ *	destination %NL80211_ATTR_MAC on the interface identified by
+ *	%NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
  *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *	%NL80211_ATTR_IFINDEX.
  *
@@ -475,15 +471,15 @@
  *	after being queried by the kernel. CRDA replies by sending a regulatory
  *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
  *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ *	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ *	regulatory rule is a nested set of attributes  given by
+ *	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ *	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ *	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
  * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
+ *	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ *	store this as a valid request and then query userspace for it.
  *
  * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
  *	interface identified by %NL80211_ATTR_IFINDEX
@@ -521,7 +517,7 @@
  *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
  *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
  *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
+ *	These attributes are mutually exclusive,
  *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
  *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
  *	If for some reason scheduled scan is aborted by the driver, all scan
@@ -552,7 +548,7 @@
  *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
  *	is brought down while a scheduled scan was running.
  *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
@@ -563,40 +559,41 @@
  *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
  *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
  *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
+ *	advertised by a FILS capable AP identifying the scope of PMKSA in an
  *	ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
  *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
  *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
+ *	authentication. Additionally in case of SAE offload and OWE offloads
+ *	PMKSA entry can be deleted using %NL80211_ATTR_SSID.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
+ *	has been changed and provides details of the request information
+ *	that caused the change such as who initiated the regulatory request
+ *	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ *	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ *	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ *	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ *	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ *	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ *	to (%NL80211_ATTR_REG_ALPHA2).
  * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
+ *	has been found while world roaming thus enabling active scan or
+ *	any mode of operation that initiates TX (beacons) on a channel
+ *	where we would not have been able to do either before. As an example
+ *	if you are world roaming (regulatory domain set to world or if your
+ *	driver is using a custom world roaming regulatory domain) and while
+ *	doing a passive scan on the 5 GHz band you find an AP there (if not
+ *	on a DFS channel) you will now be able to actively scan for that AP
+ *	or use AP mode on your card on that same channel. Note that this will
+ *	never be used for channels 1-11 on the 2 GHz band as they are always
+ *	enabled world wide. This beacon hint is only sent if your device had
+ *	either disabled active scanning or beaconing on a channel. We send to
+ *	userspace the wiphy on which we removed a restriction from
+ *	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ *	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ *	the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *	This command is used both as a command (request to authenticate) and
@@ -607,7 +604,7 @@
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
  *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
  *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
  *	authentication type. %NL80211_ATTR_IE is used to define IEs
  *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
@@ -816,7 +813,7 @@
  *	reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
  *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	(identified by %NL80211_ATTR_IFINDEX) shall operate on.
  *	In case multiple channels are supported by the device, the mechanism
  *	with which it switches channels is implementation-defined.
  *	When a monitor interface is given, it can only switch channel while
@@ -888,7 +885,7 @@
  *	inform userspace of the new replay counter.
  *
  * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
+ *	of PMKSA caching candidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  *	In addition, this can be used as an event to request userspace to take
@@ -924,7 +921,7 @@
  *
  * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
  *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	acknowledged. This is used to allow timing out inactive clients. Uses
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
  *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
  *	up the event with the request. The event includes the same data and
@@ -1118,7 +1115,7 @@
  *	current configuration is not changed.  If it is present but
  *	set to zero, the configuration is changed to don't-care
  *	(i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
  *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *	%NL80211_ATTR_COOKIE.
  *
@@ -1135,11 +1132,15 @@
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
- *	completed successfully. Drivers that support 4 way handshake offload
- *	should send this event after indicating 802.1X FT assocation with
- *	%NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
- *	should be indicated instead.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
+ *	open for regular data traffic. For STA/P2P-client, this event is sent
+ *	with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
+ *	client MAC address.
+ *	Drivers that support 4 way handshake offload should send this event for
+ *	STA/P2P-client after successful 4-way HS or after 802.1X FT following
+ *	NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
+ *	handshake offload should send this event on successful completion of
+ *	4-way handshake with the peer (STA/P2P-client).
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
  *	a control port frame and as a notification that a control port frame
@@ -1323,6 +1324,11 @@
  *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
  *	information about the removed STA MLD setup links.
  *
+ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
+ *      non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
+ *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
+ *      TID to Link mapping for downlink/uplink traffic.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1578,6 +1584,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_LINKS_REMOVED,
 
+	NL80211_CMD_SET_TID_TO_LINK_MAPPING,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1702,21 +1710,21 @@ enum nl80211_commands {
  *	(see &enum nl80211_plink_action).
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
  *	&enum nl80211_mpath_info.
  *
  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_mntr_flags.
  *
  * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11 country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
+ *	current regulatory domain should be set to or is already set to.
+ *	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ *	to query the CRDA to retrieve one regulatory domain. This attribute can
+ *	also be used by userspace to query the kernel for the currently set
+ *	regulatory domain. We chose an alpha2 as that is also used by the
+ *	IEEE-802.11 country information element to identify a country.
+ *	Users can also simply ask the wireless core to set regulatory domain
+ *	to a specific alpha2.
  * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
  *	rules.
  *
@@ -1759,9 +1767,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSS: scan result BSS
  *
  * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ *	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
  *
  * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
  *	an array of command numbers (i.e. a mapping index to command number)
@@ -1780,15 +1788,15 @@ enum nl80211_commands {
  *	a u32
  *
  * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _before_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
+ *	due to considerations from a beacon hint. This attribute reflects
+ *	the state of the channel _after_ the beacon hint processing. This
+ *	attributes consists of a nested attribute containing
+ *	NL80211_FREQUENCY_ATTR_*
  *
  * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
  *	cipher suites
@@ -1835,7 +1843,7 @@ enum nl80211_commands {
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
  *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- *	frames are not forwared over the control port.
+ *	frames are not forwarded over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -1849,12 +1857,6 @@ enum nl80211_commands {
  *	that protected APs should be used. This is also used with NEW_BEACON to
  *	indicate that the BSS is to use protection.
  *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
  * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *	indicate which WPA version(s) the AP we want to associate with is using
  *	(a u32 with flags from &enum nl80211_wpa_versions).
@@ -1885,6 +1887,7 @@ enum nl80211_commands {
  *	with %NL80211_KEY_* sub-attributes
  *
  * @NL80211_ATTR_PID: Process ID of a network namespace.
+ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
  *
  * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
  *	dumps. This number increases whenever the object list being
@@ -1939,6 +1942,7 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
+ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
  *
  * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
  *
@@ -1972,10 +1976,10 @@ enum nl80211_commands {
  *	bit. Depending on which antennas are selected in the bitmap, 802.11n
  *	drivers can derive which chainmasks to use (if all antennas belonging to
  *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
+ *	a chain has diversity antennas whether diversity should be used or not.
  *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
  *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Non-802.11n drivers can derive whether to use diversity or not.
  *	Drivers may reject configurations or RX/TX mask combinations they cannot
  *	support by returning -EINVAL.
  *
@@ -2048,6 +2052,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
  *	interface combinations. In each nested item, it contains attributes
  *	defined in &enum nl80211_if_combination_attrs.
+ *	If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
+ *	this attribute contains the interface combinations of the first radio.
+ *	See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
+ *	combinations for the sum of all radios.
  * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
  *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
  *	are managed in software: interfaces of these types aren't subject to
@@ -2136,6 +2144,9 @@ enum nl80211_commands {
  * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
@@ -2145,6 +2156,12 @@ enum nl80211_commands {
  *      All values are treated as suggestions and may be ignored
  *      by the driver as required.  The actual values may be seen in
  *      the station debugfs ht_caps file.
+ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_VHT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs vht_caps file.
  *
  * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
  *    abides to when initiating radiation on DFS channels. A country maps
@@ -2403,7 +2420,7 @@ enum nl80211_commands {
  *	scheduled scan is started.  Or the delay before a WoWLAN
  *	net-detect scan is started, counting from the moment the
  *	system is suspended.  This value is a u32, in seconds.
-
+ *
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
@@ -2545,7 +2562,7 @@ enum nl80211_commands {
  *	from successful FILS authentication and is used with
  *	%NL80211_CMD_CONNECT.
  *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
  *	identifying the scope of PMKSAs. This is used with
  *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
@@ -2826,6 +2843,31 @@ enum nl80211_commands {
  * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
  *	disabled.
  *
+ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
+ *	include BSSes that can only be used in restricted scenarios and/or
+ *	cannot be used at all.
+ *
+ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ *
+ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
+ *	%NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
+ *	are used on this connection
+ *
+ * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
+ *	belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
+ *
+ * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
+ *	supported interface combinations for all radios combined. In each
+ *	nested item, it contains attributes defined in
+ *	&enum nl80211_if_combination_attrs.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3364,6 +3406,16 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MLO_LINK_DISABLED,
 
+	NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
+
+	NL80211_ATTR_MLO_TTLM_DLINK,
+	NL80211_ATTR_MLO_TTLM_ULINK,
+
+	NL80211_ATTR_ASSOC_SPP_AMSDU,
+
+	NL80211_ATTR_WIPHY_RADIOS,
+	NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3504,6 +3556,7 @@ enum nl80211_iftype {
  * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
  *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
  *	previously added station into associated state
+ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -3516,6 +3569,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_AUTHENTICATED,
 	NL80211_STA_FLAG_TDLS_PEER,
 	NL80211_STA_FLAG_ASSOCIATED,
+	NL80211_STA_FLAG_SPP_AMSDU,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -3526,7 +3580,7 @@ enum nl80211_sta_flags {
  * enum nl80211_sta_p2p_ps_status - station support of P2P PS
  *
  * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
  * @NUM_NL80211_P2P_PS_STATUS: number of values
  */
 enum nl80211_sta_p2p_ps_status {
@@ -3564,9 +3618,9 @@ enum nl80211_he_gi {
 
 /**
  * enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
  */
 enum nl80211_he_ltf {
 	NL80211_RATE_INFO_HE_1XLTF,
@@ -3681,7 +3735,7 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
  *	(u8, see &enum nl80211_he_gi)
  * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
  * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@@ -3784,7 +3838,7 @@ enum nl80211_sta_bss_param {
  *	(u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
+ *	containing info as possible, see &enum nl80211_rate_info
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
  *	(u32, from this station)
  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
@@ -3813,8 +3867,8 @@ enum nl80211_sta_bss_param {
  *	Contains a nested array of signal strength attributes (u8, dBm)
  * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
  *	Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- *	802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
+ *	the 802.11 header (u32, kbps)
  * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
  *	(u64)
  * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@@ -4000,7 +4054,7 @@ enum nl80211_mpath_flags {
  * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
  * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
+ *	&enum nl80211_mpath_flags;
  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
  * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
@@ -4140,7 +4194,7 @@ enum nl80211_band_attr {
  * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
  * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
  * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @NL80211_WMMR_MAX: highest possible wmm rule.
  * @__NL80211_WMMR_LAST: Internal use.
  */
 enum nl80211_wmm_rule {
@@ -4162,15 +4216,16 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
  *	regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
- * 	are permitted on this channel, this includes sending probe
- * 	requests, or modes of operation that require beaconing.
+ *	are permitted on this channel, this includes sending probe
+ *	requests, or modes of operation that require beaconing.
+ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
  *	(100 * dBm).
  * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
  *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
  *	this channel is in this DFS state.
  * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
  *	channel as the control channel
@@ -4226,6 +4281,19 @@ enum nl80211_wmm_rule {
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
  *	is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ *	allowed for peer-to-peer or adhoc communication under the control
+ *	of a DFS master which operates on the same channel (FCC-594280 D01
+ *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
+ *	mode despite other (regulatory) restrictions, even if the channel is
+ *	otherwise completely disabled.
+ * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
+ *	very low power (VLP) AP, despite being NO_IR.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4265,6 +4333,11 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
+	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
+	NL80211_FREQUENCY_ATTR_CAN_MONITOR,
+	NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4277,6 +4350,10 @@ enum nl80211_frequency_attr {
 #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
 					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
@@ -4299,16 +4376,16 @@ enum nl80211_bitrate_attr {
 };
 
 /**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
  * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
+ *	regulatory domain.
  * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
+ *	wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
+ *	802.11 country information element with regulatory information it
+ *	thinks we should consider. cfg80211 only processes the country
  *	code from the IE, and relies on the regulatory domain information
  *	structure passed by userspace (CRDA) from our wireless-regdb.
  *	If a channel is enabled but the country code indicates it should
@@ -4327,11 +4404,11 @@ enum nl80211_reg_initiator {
  *	to a specific country. When this is set you can count on the
  *	ISO / IEC 3166 alpha2 country code being valid.
  * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
+ *	domain.
  * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
+ *	driver specific world regulatory domain. These do not apply system-wide
+ *	and are only applicable to the individual devices which have requested
+ *	them to be applied.
  * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
  *	of an intersection between two regulatory domains -- the previously
  *	set regulatory domain on the system and the last accepted regulatory
@@ -4348,21 +4425,21 @@ enum nl80211_reg_type {
  * enum nl80211_reg_rule_attr - regulatory rule attributes
  * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
+ *	considerations for a given frequency range. These are the
+ *	&enum nl80211_reg_rule_flags.
  * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
+ *	rule in KHz. This is not a center of frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
+ *	in KHz. This is not a center a frequency but an actual regulatory
+ *	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
  *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
+ *	for a given frequency range. The value is in mBi (100 * dBi).
+ *	If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
+ *	a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
  * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
@@ -4414,14 +4491,7 @@ enum nl80211_reg_rule_attr {
  *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
  *	(this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- *	band specific minimum rssi thresholds for the bands defined in
- *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- *	band shall be encapsulated in attribute with type value equals to one
- *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- *	attributes will be nested within this attribute.
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -4434,7 +4504,7 @@ enum nl80211_sched_scan_match_attr {
 	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
-	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
+	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4456,8 +4526,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
  * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * 	this includes probe requests or modes of operation that require
- * 	beaconing.
+ *	this includes probe requests or modes of operation that require
+ *	beaconing.
+ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
@@ -4470,6 +4541,14 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+ *	peer-to-peer or adhoc communication under the control of a DFS master
+ *	which operates on the same channel (FCC-594280 D01 Section B.3).
+ *	Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
+ * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
+ *	despite NO_IR configuration.
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4491,6 +4570,10 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_320MHZ		= 1<<18,
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
+	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
+	NL80211_RRF_NO_6GHZ_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_6GHZ_AFC_CLIENT	= 1<<23,
+	NL80211_RRF_ALLOW_6GHZ_VLP_AP	= 1<<24,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4499,6 +4582,8 @@ enum nl80211_reg_rule_flags {
 #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
 					 NL80211_RRF_NO_HT40PLUS)
 #define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
+#define NL80211_RRF_NO_UHB_VLP_CLIENT	NL80211_RRF_NO_6GHZ_VLP_CLIENT
+#define NL80211_RRF_NO_UHB_AFC_CLIENT	NL80211_RRF_NO_6GHZ_AFC_CLIENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -4645,8 +4730,8 @@ enum nl80211_mntr_flags {
  *	alternate between Active and Doze states, but may not wake up
  *	for neighbor's beacons.
  *
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
+ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
+ * @NL80211_MESH_POWER_MAX: highest possible power save level
  */
 
 enum nl80211_mesh_power_mode {
@@ -5027,6 +5112,36 @@ enum nl80211_bss_scan_width {
 	NL80211_BSS_CHAN_WIDTH_2,
 };
 
+/**
+ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
+ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
+ *	including IBSS/MBSS depending on the type.
+ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
+ *	MLO connection. Note that for an MLO connection, all links including
+ *	the assoc link must have this flag set, and the assoc link must
+ *	additionally have %NL80211_BSS_USE_FOR_NORMAL set.
+ */
+enum nl80211_bss_use_for {
+	NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
+	NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
+};
+
+/**
+ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
+ *	BSS isn't possible
+ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
+ *	supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
+ *	the AP power type (SP, VLP, AP) that the AP uses.
+ */
+enum nl80211_bss_cannot_use_reasons {
+	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH	= 1 << 1,
+};
+
+#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
+
 /**
  * enum nl80211_bss - netlink attributes for a BSS
  *
@@ -5079,6 +5194,14 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
+ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
+ *	used for, see &enum nl80211_bss_use_for.
+ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
+ *	be used for all or some of the possible uses by the device reporting it,
+ *	even though its presence was detected.
+ *	This is a u64 attribute containing a bitmap of values from
+ *	&enum nl80211_cannot_use_reasons, note that the attribute may be missing
+ *	if no reasons are specified.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -5106,6 +5229,8 @@ enum nl80211_bss {
 	NL80211_BSS_FREQUENCY_OFFSET,
 	NL80211_BSS_MLO_LINK_ID,
 	NL80211_BSS_MLD_ADDR,
+	NL80211_BSS_USE_FOR,
+	NL80211_BSS_CANNOT_USE_REASONS,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -5454,7 +5579,7 @@ enum nl80211_tx_rate_setting {
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
  *	that the new configuration overrides all previous peer
  *	configurations, otherwise previous peer specific configurations
  *	should be left untouched.
@@ -5626,7 +5751,7 @@ struct nl80211_pattern_support {
  *	"TCP connection wakeup" for more details. This is a nested attribute
  *	containing the exact information for establishing and keeping alive
  *	the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
  *	wakeup packet was received on the TCP connection
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
  *	TCP connection was lost or failed to be established
@@ -5655,6 +5780,8 @@ struct nl80211_pattern_support {
  *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
  *	frequency, it means that the match occurred in more than one
  *	channel.
+ * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
+ *	Wake up happened due to unprotected deauth or disassoc frame in MFP.
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  *
@@ -5682,6 +5809,7 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 	NL80211_WOWLAN_TRIG_NET_DETECT,
 	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
+	NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -5837,7 +5965,7 @@ enum nl80211_attr_coalesce_rule {
 
 /**
  * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
  *	in a rule are matched.
  * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
  *	in a rule are not matched.
@@ -5936,7 +6064,7 @@ enum nl80211_if_combination_attrs {
  * enum nl80211_plink_state - state of a mesh peer link finite state machine
  *
  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existent mesh peer links
+ *	state of non-existent mesh peer links
  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
  *	this mesh peer
  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@@ -5972,7 +6100,7 @@ enum nl80211_plink_state {
  * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
  * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
  */
-enum plink_actions {
+enum nl80211_plink_action {
 	NL80211_PLINK_ACTION_NO_ACTION,
 	NL80211_PLINK_ACTION_OPEN,
 	NL80211_PLINK_ACTION_BLOCK,
@@ -6229,7 +6357,7 @@ enum nl80211_feature_flags {
  *	request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
+ *	NL80211_FEATURE_QUIET is not advertised.
  * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
  *	sniffer which means that it can be configured to hear packets from
  *	certain groups which can be configured by the
@@ -6241,13 +6369,15 @@ enum nl80211_feature_flags {
  *	the BSS that the interface that requested the scan is connected to
  *	(if available).
  * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
- *	BSS that the interface that requested the scan is connected to
- *	(if available).
+ *	time the last beacon/probe was received. For a non-MLO connection, the
+ *	time is the TSF of the BSS that the interface that requested the scan is
+ *	connected to (if available). For an MLO connection, the time is the TSF
+ *	of the BSS corresponding with link ID specified in the scan request (if
+ *	specified).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
  * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ *	configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
  * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
  *	configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
@@ -6297,6 +6427,7 @@ enum nl80211_feature_flags {
  *	receiving control port frames over nl80211 instead of the netdevice.
  * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
  *	(average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
  * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
  *      TXQs.
  * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -6321,8 +6452,7 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
  *	(set/del PMKSA operations) in AP mode.
  *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- *	filtering of sched scan results using band specific RSSI thresholds.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
  *
  * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
  *	to a station.
@@ -6426,6 +6556,16 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
  *	handling in AP mode.
  *
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ *	ad hoc operation on DFS channels under the control of a concurrent
+ *	DFS master on the same channel as described in FCC-594280 D01
+ *	(Section B.3). This, for example, allows P2P GO and P2P clients to
+ *	operate on DFS channels as long as there's a concurrent BSS connection.
+ *
+ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
+ *	(signaling and payload protected) A-MSDUs and this shall be advertised
+ *	in the RSNXE.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6467,7 +6607,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
 	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
 	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
-	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
 	NL80211_EXT_FEATURE_EXT_KEY_ID,
 	NL80211_EXT_FEATURE_STA_TX_PWR,
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
@@ -6499,6 +6639,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_DFS_CONCURRENT,
+	NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6583,7 +6725,7 @@ enum nl80211_timeout_reason {
  *	request parameters IE in the probe request
  * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ *	rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
  *	only the first probe req in the channel will be sent in high rate.
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
  *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@@ -6619,7 +6761,7 @@ enum nl80211_timeout_reason {
  *	received on the 2.4/5 GHz channels to actively scan only the 6GHz
  *	channels on which APs are expected to be found. Note that when not set,
  *	the scan logic would scan all 6GHz channels, but since transmission of
- *	probe requests on non PSC channels is limited, it is highly likely that
+ *	probe requests on non-PSC channels is limited, it is highly likely that
  *	these channels would passively be scanned. Also note that when the flag
  *	is set, in addition to the colocated APs, PSC channels would also be
  *	scanned if the user space has asked for it.
@@ -6669,6 +6811,8 @@ enum nl80211_acl_policy {
  * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
  * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
  *	turn on other antennas after CTS/RTS).
+ * @__NL80211_SMPS_AFTER_LAST: internal
+ * @NL80211_SMPS_MAX: highest used enumeration
  */
 enum nl80211_smps_mode {
 	NL80211_SMPS_OFF,
@@ -6890,6 +7034,8 @@ enum nl80211_bss_select_attr {
  * @NL80211_NAN_FUNC_PUBLISH: function is publish
  * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
  * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
+ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
  */
 enum nl80211_nan_function_type {
 	NL80211_NAN_FUNC_PUBLISH,
@@ -6951,7 +7097,7 @@ enum nl80211_nan_func_term_reason {
  *	The instance ID for the follow up Service Discovery Frame. This is u8.
  * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
  *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
+ *	The requester instance ID for the follow up Service Discovery Frame.
  * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
  *	follow up Service Discovery Frame. This is a binary attribute.
  * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
@@ -7050,7 +7196,7 @@ enum nl80211_nan_match_attributes {
 };
 
 /**
- * nl80211_external_auth_action - Action to perform with external
+ * enum nl80211_external_auth_action - Action to perform with external
  *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
  * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
  * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@@ -7068,7 +7214,7 @@ enum nl80211_external_auth_action {
  * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
  *	i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
  *	(9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
  *	i.e. starting with the measurement token
  * @__NL80211_FTM_RESP_ATTR_LAST: Internal
@@ -7341,7 +7487,7 @@ enum nl80211_peer_measurement_attrs {
  * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
  *	trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- *	if non trigger based ranging measurement is supported
+ *	if non-trigger-based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7395,7 +7541,7 @@ enum nl80211_peer_measurement_ftm_capa {
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *	ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
  *	ranging measurement (flag)
  *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
  *	mutually exclusive.
@@ -7473,7 +7619,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
  *	transmitted (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- *	that were acknowleged (u32, optional)
+ *	that were acknowledged (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
  *	busy peer (u32, seconds)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
@@ -7711,6 +7857,7 @@ enum nl80211_sae_pwe_mechanism {
  *
  * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
  *
+ * @NUM_NL80211_SAR_TYPE: internal
  */
 enum nl80211_sar_type {
 	NL80211_SAR_TYPE_POWER,
@@ -7724,6 +7871,8 @@ enum nl80211_sar_type {
 /**
  * enum nl80211_sar_attrs - Attributes for SAR spec
  *
+ * @__NL80211_SAR_ATTR_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
  *
  * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@@ -7755,6 +7904,8 @@ enum nl80211_sar_attrs {
 /**
  * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
  *
+ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
+ *
  * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
  *	power limit value in units of 0.25 dBm if type is
  *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
@@ -7869,4 +8020,54 @@ enum nl80211_ap_settings_flags {
 	NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT	= 1 << 1,
 };
 
+/**
+ * enum nl80211_wiphy_radio_attrs - wiphy radio attributes
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)
+ * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this
+ *	radio. Attribute may be present multiple times.
+ * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface
+ *	combination for this radio. Attribute may be present multiple times
+ *	and contains attributes defined in &enum nl80211_if_combination_attrs.
+ *
+ * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_attrs {
+	__NL80211_WIPHY_RADIO_ATTR_INVALID,
+
+	NL80211_WIPHY_RADIO_ATTR_INDEX,
+	NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,
+	NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,
+
+	/* keep last */
+	__NL80211_WIPHY_RADIO_ATTR_LAST,
+	NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
+ *
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).
+ *	The unit is kHz.
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).
+ *	The unit is kHz.
+ *
+ * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
+ * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
+ */
+enum nl80211_wiphy_radio_freq_range {
+	__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
+
+	NL80211_WIPHY_RADIO_FREQ_ATTR_START,
+	NL80211_WIPHY_RADIO_FREQ_ATTR_END,
+
+	__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
+	NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
+};
+
 #endif /* __LINUX_NL80211_H */