hostapd/src/common/qca-vendor.h

8807 lines
375 KiB
C
Raw Normal View History

/*
* Qualcomm Atheros OUI and vendor specific assignments
* Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
Add QCA vendor command to support beacon reporting feature Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING to implement beacon reporting feature. Different operations required to implement this feature can be specified in QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. Userspace requests the driver/firmware to periodically report received Beacon frames whose BSSID matches the current connected BSS's MAC address. If userspace requests the driver/firmware to send beacon reports actively, the driver encapsulates the details of the beacon in an event and sends it to userspace asynchronously. Otherwise, the driver will only update the beacon in cfg80211 scan cache but will not send any event to userspace. If this command is not issued, the current behavior of the driver/firmware is to update the cfg80211 scan cache only when there is a scan issued by the host in progress or whenever there is a change in IEs of the Beacon frames from the current connected BSS. The userspace requests the driver/firmware to stop reporting beacons when reporting is not required anymore. If the driver/firmware is not able to receive Beacon frames because of other Wi-Fi operations such as off-channel activities, etc., the driver/firmware sends a pause event to userspace and stops reporting Beacon frames. The driver/firmware indicates whether the beacon reporting automatically resumes later by using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If userspace doesn't want the beacon reporting to be resumed automatically, userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to the driver to stop beacon reporting. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 21:23:05 +02:00
* Copyright (c) 2018-2019, The Linux Foundation
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#ifndef QCA_VENDOR_H
#define QCA_VENDOR_H
/*
* This file is a registry of identifier assignments from the Qualcomm Atheros
* OUI 00:13:74 for purposes other than MAC address assignment. New identifiers
* can be assigned through normal review process for changes to the upstream
* hostap.git repository.
*/
#define OUI_QCA 0x001374
#ifndef BIT
#define BIT(x) (1U << (x))
#endif
/**
* enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
*/
enum qca_radiotap_vendor_ids {
QCA_RADIOTAP_VID_WLANTEST = 0,
};
/**
* enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
*
* @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0
*
* @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event
*
* @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use
* internal BSS-selection. This command uses
* @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy
* for the current connection (i.e., changes policy set by the nl80211
* Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be
* included to indicate which BSS to use in case roaming is disabled.
*
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
* ranges to avoid to reduce issues due to interference or internal
* co-existence information in the driver. These frequencies aim to
* minimize the traffic but not to totally avoid the traffic. That said
* for a P2P use case, these frequencies are allowed for the P2P
* discovery/negotiation but avoid the group to get formed on these
* frequencies. The event data structure is defined in
* struct qca_avoid_freq_list.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
* for DFS offloading.
*
* @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
* NAN Request/Response and NAN Indication messages. These messages are
* interpreted between the framework and the firmware component. While
* sending the command from userspace to the driver, payload is not
* encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN
* is used when receiving vendor events in userspace from the driver.
*
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
* used to configure PMK to the driver even when not connected. This can
* be used to request offloading of key management operations. Only used
* if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
*
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
* NL80211_CMD_ROAM event with optional attributes including information
* from offloaded key management operation. Uses
* enum qca_wlan_vendor_attr_roam_auth attributes. Only used
* if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
*
* @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
* invoke the ACS function in device and pass selected channels to
* hostapd. Uses enum qca_wlan_vendor_attr_acs_offload attributes.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
* supported by the driver. enum qca_wlan_vendor_features defines
* the possible features.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
* which supports DFS offloading, to indicate a channel availability check
* start.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
* which supports DFS offloading, to indicate a channel availability check
* completion.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
* which supports DFS offloading, to indicate that the channel availability
* check aborted, no change to the channel status.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
* driver, which supports DFS offloading, to indicate that the
* Non-Occupancy Period for this channel is over, channel becomes usable.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
* which supports DFS offloading, to indicate a radar pattern has been
* detected. The channel is now unusable.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: Get information from the driver.
* Attributes defined in enum qca_wlan_vendor_attr_get_wifi_info.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: Get the feature bitmap
* based on enum wifi_logger_supported_features. Attributes defined in
* enum qca_wlan_vendor_attr_get_logger_features.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA: Get the ring data from a particular
* logger ring, QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID is passed as the
* attribute for this command. Attributes defined in
* enum qca_wlan_vendor_attr_wifi_logger_start.
*
* @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES: Get the supported TDLS
* capabilities of the driver, parameters includes the attributes defined
* in enum qca_wlan_vendor_attr_tdls_get_capabilities.
*
* @QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS: Vendor command used to offload
* sending of certain periodic IP packet to firmware, attributes defined in
* enum qca_wlan_vendor_attr_offloaded_packets.
*
* @QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI: Command used to configure RSSI
* monitoring, defines min and max RSSI which are configured for RSSI
* monitoring. Also used to notify the RSSI breach and provides the BSSID
* and RSSI value that was breached. Attributes defined in
* enum qca_wlan_vendor_attr_rssi_monitoring.
*
* @QCA_NL80211_VENDOR_SUBCMD_NDP: Command used for performing various NAN
* Data Path (NDP) related operations, attributes defined in
* enum qca_wlan_vendor_attr_ndp_params.
*
* @QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD: Command used to enable/disable
* Neighbour Discovery offload, attributes defined in
* enum qca_wlan_vendor_attr_nd_offload.
*
* @QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER: Used to set/get the various
* configuration parameter for BPF packet filter, attributes defined in
* enum qca_wlan_vendor_attr_packet_filter.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE: Gets the driver-firmware
* maximum supported size, attributes defined in
* enum qca_wlan_vendor_drv_info.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS: Command to get various
* data about wake reasons and datapath IP statistics, attributes defined
* in enum qca_wlan_vendor_attr_wake_stats.
*
* @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG: Command used to set configuration
* for IEEE 802.11 communicating outside the context of a basic service
* set, called OCB command. Uses the attributes defines in
* enum qca_wlan_vendor_attr_ocb_set_config.
*
* @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME: Command used to set OCB
* UTC time. Use the attributes defines in
* enum qca_wlan_vendor_attr_ocb_set_utc_time.
*
* @QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT: Command used to start
* sending OCB timing advert frames. Uses the attributes defines in
* enum qca_wlan_vendor_attr_ocb_start_timing_advert.
*
* @QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT: Command used to stop
* OCB timing advert. Uses the attributes defines in
* enum qca_wlan_vendor_attr_ocb_stop_timing_advert.
*
* @QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER: Command used to get TSF
* timer value. Uses the attributes defines in
* enum qca_wlan_vendor_attr_ocb_get_tsf_resp.
*
* @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: Command/event to update the
* link properties of the respective interface. As an event, is used
* to notify the connected station's status. The attributes for this
* command are defined in enum qca_wlan_vendor_attr_link_properties.
*
* @QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY: This command is used to configure
* DFS policy and channel hint for ACS operation. This command uses the
* attributes defined in enum qca_wlan_vendor_attr_acs_config and
* enum qca_acs_dfs_mode.
*
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
* start the P2P Listen offload function in device and pass the listen
* channel, period, interval, count, device types, and vendor specific
* information elements to the device driver and firmware.
* Uses the attributes defines in
* enum qca_wlan_vendor_attr_p2p_listen_offload.
*
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
* indicate stop request/response of the P2P Listen offload function in
* device. As an event, it indicates either the feature stopped after it
* was already running or feature has actually failed to start. Uses the
* attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload.
*
* @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts
* beaconing, this sub command provides the driver, the frequencies on the
* 5 GHz band to check for any radar activity. Driver selects one channel
* from this priority list provided through
* @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
* to check for radar activity on it. If no radar activity is detected
* during the channel availability check period, driver internally switches
* to the selected frequency of operation. If the frequency is zero, driver
* internally selects a channel. The status of this conditional switch is
* indicated through an event using the same sub command through
* @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
* listed in qca_wlan_vendor_attr_sap_conditional_chan_switch.
*
* @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the
* attributes defined in enum qca_wlan_gpio_attr.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities.
* This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which
* capabilities are to be fetched and other
* enum qca_wlan_vendor_attr_get_hw_capability attributes to return the
* requested capabilities.
*
* @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension.
* enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this
* command and event.
*
* @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for
* indoor location features. Capabilities are reported in
* QCA_WLAN_VENDOR_ATTR_LOC_CAPA.
*
* @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM
* (fine timing measurement) session with one or more peers.
* Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and
* peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS.
* On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT
* events will be reported, followed by
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate
* end of session.
* Refer to IEEE P802.11-REVmc/D7.0, 11.24.6
*
* @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session.
* A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with
* status code indicating session was aborted.
*
* @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement
* results for one peer. Results are reported in
* QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS.
*
* @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when
* FTM session is finished, either successfully or aborted by
* request.
*
* @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder
* mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether
* to enable or disable the responder. LCI/LCR reports can be
* configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and
* QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple
* times to update the LCI/LCR reports.
*
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of
* arrival) measurement with a single peer. Specify peer MAC address in
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR and optionally frequency (MHz) in
* QCA_WLAN_VENDOR_ATTR_FREQ (if not specified, locate peer in kernel
* scan results cache and use the frequency from there).
* Also specify measurement type in QCA_WLAN_VENDOR_ATTR_AOA_TYPE.
* Measurement result is reported in
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event.
*
* @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify
* peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
*
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports
* the AOA measurement result.
* Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
* success/failure status is reported in
* QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS.
* Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
* The antenna array(s) used in the measurement are reported in
* QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK.
*
* @QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST: Encrypt/decrypt the given
* data as per the given parameters.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a
* specific chain.
*
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG: Get low level
* configuration for a DMG RF sector. Specify sector index in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and RF modules
* to return sector information for in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK. Returns sector configuration
* in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. Also return the
* exact time where information was captured in
* QCA_WLAN_VENDOR_ATTR_TSF.
*
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG: Set low level
* configuration for a DMG RF sector. Specify sector index in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and sector configuration
* for one or more DMG RF modules in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG.
*
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR: Get selected
* DMG RF sector for a station. This is the sector that the HW
* will use to communicate with the station. Specify the MAC address
* of associated station/AP/PCP in QCA_WLAN_VENDOR_ATTR_MAC_ADDR (not
* needed for unassociated station). Specify sector type to return in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE. Returns the selected
* sector index in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX.
* Also return the exact time where the information was captured
* in QCA_WLAN_VENDOR_ATTR_TSF.
*
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR: Set the
* selected DMG RF sector for a station. This is the sector that
* the HW will use to communicate with the station.
* Specify the MAC address of associated station/AP/PCP in
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR, the sector type to select in
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and the sector index
* in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX.
* The selected sector will be locked such that it will not be
* modified like it normally does (for example when station
* moves around). To unlock the selected sector for a station
* pass the special value 0xFFFF in the sector index. To unlock
* all connected stations also pass a broadcast MAC address.
*
* @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior
* in the host driver. The different TDLS configurations are defined
* by the attributes in enum qca_wlan_vendor_attr_tdls_configuration.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Query device IEEE 802.11ax HE
* capabilities. The response uses the attributes defined in
* enum qca_wlan_vendor_attr_get_he_capabilities.
*
* @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: Abort an ongoing vendor scan that was
* started with QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN. This command
* carries the scan cookie of the corresponding scan request. The scan
* cookie is represented by QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE.
*
* @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS: Set the Specific
* Absorption Rate (SAR) power limits. A critical regulation for
* FCC compliance, OEMs require methods to set SAR limits on TX
* power of WLAN/WWAN. enum qca_vendor_attr_sar_limits
* attributes are used with this command.
*
* @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: This command/event is used by the
* host driver for offloading the implementation of Auto Channel Selection
* (ACS) to an external user space entity. This interface is used as the
* event from the host driver to the user space entity and also as the
* request from the user space entity to the host driver. The event from
* the host driver is used by the user space entity as an indication to
* start the ACS functionality. The attributes used by this event are
* represented by the enum qca_wlan_vendor_attr_external_acs_event.
* User space entity uses the same interface to inform the host driver with
* selected channels after the ACS operation using the attributes defined
* by enum qca_wlan_vendor_attr_external_acs_channels.
*
* @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE: Vendor event carrying the
* requisite information leading to a power save failure. The information
* carried as part of this event is represented by the
* enum qca_attr_chip_power_save_failure attributes.
*
* @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET: Start/Stop the NUD statistics
* collection. Uses attributes defined in enum qca_attr_nud_stats_set.
*
* @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These
* statistics are represented by the enum qca_attr_nud_stats_get
* attributes.
*
* @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch
* the BSS transition status, whether accept or reject, for a list of
* candidate BSSIDs provided by the userspace. This uses the vendor
* attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify
* the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an
* array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response
* the driver shall specify array of
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO.
*
* @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a
* specific QCA module. The trace levels are represented by
* enum qca_attr_trace_level attributes.
*
* @QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT: Set the Beam Refinement
* Protocol antenna limit in different modes. See enum
* qca_wlan_vendor_attr_brp_ant_limit_mode.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan
* parameters are specified by enum qca_wlan_vendor_attr_spectral_scan.
* This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE)
* identifying the operation in success case. In failure cases an
* error code (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE)
* describing the reason for the failure is returned.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses
* a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START to identify the scan to
* be stopped.
*
* @QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS: Set the active Type Of Service on the
* specific interface. This can be used to modify some of the low level
* scan parameters (off channel dwell time, home channel time) in the
* driver/firmware. These parameters are maintained within the host driver.
* This command is valid only when the interface is in the connected state.
* These scan parameters shall be reset by the driver/firmware once
* disconnected. The attributes used with this command are defined in
* enum qca_wlan_vendor_attr_active_tos.
*
* @QCA_NL80211_VENDOR_SUBCMD_HANG: Event indicating to the user space that the
* driver has detected an internal failure. This event carries the
* information indicating the reason that triggered this detection. The
* attributes for this command are defined in
* enum qca_wlan_vendor_attr_hang.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values
* of spectral parameters used. The spectral scan parameters are specified
* by enum qca_wlan_vendor_attr_spectral_scan.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats
* for spectral scan functionality. The debug stats are specified by
* enum qca_wlan_vendor_attr_spectral_diag_stats.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral
* scan system capabilities. The capabilities are specified
* by enum qca_wlan_vendor_attr_spectral_cap.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current
* status of spectral scan. The status values are specified
* by enum qca_wlan_vendor_attr_spectral_scan_status.
*
* @QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING: Sub-command to flush
* peer pending packets. Specify the peer MAC address in
* QCA_WLAN_VENDOR_ATTR_PEER_ADDR and the access category of the packets
* in QCA_WLAN_VENDOR_ATTR_AC. The attributes are listed
* in enum qca_wlan_vendor_attr_flush_pending.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative
* RF Operating Parameter (RROP) information. The attributes for this
* information are defined in enum qca_wlan_vendor_attr_rrop_info. This is
* intended for use by external Auto Channel Selection applications.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS: Get the Specific Absorption Rate
* (SAR) power limits. This is a companion to the command
* @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the
* settings currently in use. The attributes returned by this command are
* defined by enum qca_vendor_attr_sar_limits.
*
* @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO: Provides the current behavior of
* the WLAN hardware MAC. Also, provides the WLAN netdev interface
* information attached to the respective MAC.
* This works both as a query (user space asks the current mode) or event
* interface (driver advertising the current mode to the user space).
* Driver does not trigger this event for temporary hardware mode changes.
* Mode changes w.r.t Wi-Fi connection update (VIZ creation / deletion,
* channel change, etc.) are updated with this event. Attributes for this
* interface are defined in enum qca_wlan_vendor_attr_mac.
*
* @QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH: Set MSDU queue depth threshold
* per peer per TID. Attributes for this command are define in
* enum qca_wlan_set_qdepth_thresh_attr.
* @QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD: Provides the thermal shutdown action
* guide for WLAN driver. Request to suspend of driver and FW if the
* temperature is higher than the suspend threshold; resume action is
* requested to driver if the temperature is lower than the resume
* threshold. In user poll mode, request temperature data by user. For test
* purpose, getting thermal shutdown configuration parameters is needed.
* Attributes for this interface are defined in
* enum qca_wlan_vendor_attr_thermal_cmd.
* @QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT: Thermal events reported from
* driver. Thermal temperature and indication of resume completion are
* reported as thermal events. The attributes for this command are defined
* in enum qca_wlan_vendor_attr_thermal_event.
*
* @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi
* test configuration. Attributes for this command are defined in
* enum qca_wlan_vendor_attr_wifi_test_config.
*
* @QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER: This command is used to configure an
* RX filter to receive frames from stations that are active on the
* operating channel, but not associated with the local device (e.g., STAs
* associated with other APs). Filtering is done based on a list of BSSIDs
* and STA MAC addresses added by the user. This command is also used to
* fetch the statistics of unassociated stations. The attributes used with
* this command are defined in enum qca_wlan_vendor_attr_bss_filter.
*
* @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor
* command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN,
* carried a payload which was a binary blob of data. The command was not
* extendable to send more information. The newer version carries the
* legacy blob encapsulated within an attribute and can be extended with
* additional vendor attributes that can enhance the NAN command interface.
* @QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT: Event to indicate scan triggered
* or stopped within driver/firmware in order to initiate roaming. The
* attributes used with this event are defined in enum
* qca_wlan_vendor_attr_roam_scan. Some drivers may not send these events
* in few cases, e.g., if the host processor is sleeping when this event
* is generated in firmware.
*
* @QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG: This command is used to
* configure parameters per peer to capture Channel Frequency Response
* (CFR) and enable Periodic CFR capture. The attributes for this command
* are defined in enum qca_wlan_vendor_peer_cfr_capture_attr.
*
* @QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT: Event to indicate changes
* in throughput dynamically. The driver estimates the throughput based on
* number of packets being transmitted/received per second and indicates
* the changes in throughput to user space. Userspace tools can use this
* information to configure kernel's TCP parameters in order to achieve
* peak throughput. Optionally, the driver will also send guidance on
* modifications to kernel's TCP parameters which can be referred by
* userspace tools. The attributes used with this event are defined in enum
* qca_wlan_vendor_attr_throughput_change.
*
* @QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG: This command is used to set
* priorities among different types of traffic during coex scenarios.
* Current supported prioritization is among WLAN/BT/ZIGBEE with different
* profiles mentioned in enum qca_coex_config_profiles. The associated
* attributes used with this command are defined in enum
* qca_vendor_attr_coex_config.
*
* Based on the config provided, FW will boost the weight and prioritize
* the traffic for that subsystem (WLAN/BT/Zigbee).
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS: This command is used to query
* the supported AKM suite selectorss from the driver. It returns the list
* of supported AKMs in the attribute NL80211_ATTR_AKM_SUITES.
* @QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE: This command is used to get firmware
* state from the driver. It returns the firmware state in the attribute
* QCA_WLAN_VENDOR_ATTR_FW_STATE.
* @QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH: This vendor subcommand
* is used by the driver to flush per-peer cached statistics to user space
* application. This interface is used as an event from the driver to
* user space application. Attributes for this event are specified in
* enum qca_wlan_vendor_attr_peer_stats_cache_params.
* QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA attribute is expected to be
* sent in the event.
* @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to
* improve the success rate of Zigbee joining network.
* Due to PTA master limitation, Zigbee joining network success rate is
* low while WLAN is working. The WLAN driver needs to configure some
* parameters including Zigbee state and specific WLAN periods to enhance
* PTA master. All these parameters are delivered by the attributes
* defined in enum qca_mpta_helper_vendor_attr.
Add QCA vendor command to support beacon reporting feature Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING to implement beacon reporting feature. Different operations required to implement this feature can be specified in QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. Userspace requests the driver/firmware to periodically report received Beacon frames whose BSSID matches the current connected BSS's MAC address. If userspace requests the driver/firmware to send beacon reports actively, the driver encapsulates the details of the beacon in an event and sends it to userspace asynchronously. Otherwise, the driver will only update the beacon in cfg80211 scan cache but will not send any event to userspace. If this command is not issued, the current behavior of the driver/firmware is to update the cfg80211 scan cache only when there is a scan issued by the host in progress or whenever there is a change in IEs of the Beacon frames from the current connected BSS. The userspace requests the driver/firmware to stop reporting beacons when reporting is not required anymore. If the driver/firmware is not able to receive Beacon frames because of other Wi-Fi operations such as off-channel activities, etc., the driver/firmware sends a pause event to userspace and stops reporting Beacon frames. The driver/firmware indicates whether the beacon reporting automatically resumes later by using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If userspace doesn't want the beacon reporting to be resumed automatically, userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to the driver to stop beacon reporting. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 21:23:05 +02:00
* @QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING: This sub command is used to
* implement Beacon frame reporting feature.
*
* Userspace can request the driver/firmware to periodically report
* received Beacon frames whose BSSID is same as the current connected
* BSS's MAC address.
*
* In case the STA seamlessly (without sending disconnect indication to
* userspace) roams to a different BSS, Beacon frame reporting will be
* automatically enabled for the Beacon frames whose BSSID is same as the
* MAC address of the new BSS. Beacon reporting will be stopped when the
* STA is disconnected (when the disconnect indication is sent to
* userspace) and need to be explicitly enabled by userspace for next
* connection.
*
* When a Beacon frame matching configured conditions is received, and if
* userspace has requested to send asynchronous beacon reports, the
* driver/firmware will encapsulate the details of the Beacon frame in an
* event and send it to userspace along with updating the BSS information
* in cfg80211 scan cache, otherwise driver will only update the cfg80211
* scan cache with the information from the received Beacon frame but will
* not send any active report to userspace.
*
* The userspace can request the driver/firmware to stop reporting Beacon
* frames. If the driver/firmware is not able to receive Beacon frames due
* to other Wi-Fi operations such as off-channel activities, etc., the
* driver/firmware will send a pause event to userspace and stop reporting
* Beacon frames. Whether the beacon reporting will be automatically
* resumed or not by the driver/firmware later will be reported to
* userspace using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES
* flag. The beacon reporting shall be resumed for all the cases except
* either when userspace sets
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME flag in the command
* which triggered the current beacon reporting or during any disconnection
* case as indicated by setting
Add QCA vendor command to support beacon reporting feature Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING to implement beacon reporting feature. Different operations required to implement this feature can be specified in QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. Userspace requests the driver/firmware to periodically report received Beacon frames whose BSSID matches the current connected BSS's MAC address. If userspace requests the driver/firmware to send beacon reports actively, the driver encapsulates the details of the beacon in an event and sends it to userspace asynchronously. Otherwise, the driver will only update the beacon in cfg80211 scan cache but will not send any event to userspace. If this command is not issued, the current behavior of the driver/firmware is to update the cfg80211 scan cache only when there is a scan issued by the host in progress or whenever there is a change in IEs of the Beacon frames from the current connected BSS. The userspace requests the driver/firmware to stop reporting beacons when reporting is not required anymore. If the driver/firmware is not able to receive Beacon frames because of other Wi-Fi operations such as off-channel activities, etc., the driver/firmware sends a pause event to userspace and stops reporting Beacon frames. The driver/firmware indicates whether the beacon reporting automatically resumes later by using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If userspace doesn't want the beacon reporting to be resumed automatically, userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to the driver to stop beacon reporting. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 21:23:05 +02:00
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON to
* QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED by the
* driver.
*
* After QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_PAUSE event is received
* by userspace with QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES
* flag not set, the next first
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO event from the driver
* shall be considered as un-pause event.
*
* All the attributes used with this command are defined in
* enum qca_wlan_vendor_attr_beacon_reporting_params.
* @QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP: In practice, some APs have
* interop issues with the DUT. This sub command is used to transfer the
* AP info between the driver and user space. This works both as a command
* and an event. As a command, it configures the stored list of APs from
* user space to firmware; as an event, it indicates the AP info detected
* by the firmware to user space for persistent storage. The attributes
* defined in enum qca_vendor_attr_interop_issues_ap are used to deliver
* the parameters.
* @QCA_NL80211_VENDOR_SUBCMD_OEM_DATA: This command/event is used to
* send/receive OEM data binary blobs to/from application/service to/from
* firmware. The attributes defined in enum
* qca_wlan_vendor_attr_oem_data_params are used to deliver the
* parameters.
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT: This command/event is used
* to send/receive avoid frequency data using
* enum qca_wlan_vendor_attr_avoid_frequency_ext.
* This new command is alternative to existing command
* QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY since existing command/event
* is using stream of bytes instead of structured data using vendor
* attributes.
*
* @QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE: This vendor subcommand is used to
* add the STA node details in driver/firmware. Attributes for this event
* are specified in enum qca_wlan_vendor_attr_add_sta_node_params.
* @QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE: This command is used to set BT
* coex chain mode from application/service.
* The attributes defined in enum qca_vendor_attr_btc_chain_mode are used
* to deliver the parameters.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO: This vendor subcommand is used to
* get information of a station from driver to userspace. This command can
* be used in both STA and AP modes. For STA mode, it provides information
* of the current association when in connected state or the last
* association when in disconnected state. For AP mode, only information
* of the currently connected stations is available. This command uses
* attributes defined in enum qca_wlan_vendor_attr_get_sta_info.
*
* @QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT: This acts as an event.
* Host drivers can request the user space entity to set the SAR power
* limits with this event. Accordingly, the user space entity is expected
* to set the SAR power limits. Host drivers can retry this event to the
* user space for the SAR power limits configuration from user space. If
* the driver does not get the SAR power limits from user space for all
* the retried attempts, it can configure a default SAR power limit.
*
* @QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO: This acts as a vendor event and
* is used to update the information about the station from the driver to
* userspace. Uses attributes from enum
* qca_wlan_vendor_attr_update_sta_info.
*
* @QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON: This acts as an event.
* The host driver initiates the disconnection for scenarios such as beacon
* miss, NUD failure, peer kick out, etc. The disconnection indication
* through cfg80211_disconnected() expects the reason codes from enum
* ieee80211_reasoncode which does not signify these various reasons why
* the driver has triggered the disconnection. This event will be used to
* send the driver specific reason codes by the host driver to userspace.
* Host drivers should trigger this event and pass the respective reason
* code immediately prior to triggering cfg80211_disconnected(). The
* attributes used with this event are defined in enum
* qca_wlan_vendor_attr_driver_disconnect_reason.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
/* subcmds 2..8 not yet allocated */
QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11,
QCA_NL80211_VENDOR_SUBCMD_NAN = 12,
QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33,
QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41,
QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
/* 43..49 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
/* 53 - reserved - was used by QCA, but not in use anymore */
QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61,
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62,
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63,
QCA_NL80211_VENDOR_SUBCMD_ROAM = 64,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST = 65,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SSID_HOTLIST = 66,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_FOUND = 67,
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_LOST = 68,
QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST = 69,
QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST = 70,
QCA_NL80211_VENDOR_SUBCMD_PNO_RESET_PASSPOINT_LIST = 71,
QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND = 72,
QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND = 73,
/* Wi-Fi configuration subcommands */
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74,
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75,
QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET = 76,
QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA = 77,
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES = 78,
QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS = 79,
QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI = 80,
QCA_NL80211_VENDOR_SUBCMD_NDP = 81,
QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD = 82,
QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER = 83,
QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE = 84,
QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS = 85,
/* 86-90 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106,
QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107,
QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108,
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
/* 110..114 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115,
QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116,
/* 117 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
/* 121 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125,
QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127,
/* FTM/indoor location subcommands */
QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128,
QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129,
QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130,
QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131,
QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132,
QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133,
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134,
QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135,
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136,
QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137,
QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138,
/* DMG low level RF sector operations */
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139,
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140,
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141,
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142,
QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143,
QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144,
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145,
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147,
QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148,
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149,
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150,
QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151,
QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152,
QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT = 153,
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START = 154,
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155,
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156,
QCA_NL80211_VENDOR_SUBCMD_HANG = 157,
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158,
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159,
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160,
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161,
/* Flush peer pending data */
QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING = 162,
QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163,
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS = 164,
QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO = 165,
QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH = 166,
/* Thermal shutdown commands to protect wifi chip */
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD = 167,
QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT = 168,
/* Wi-Fi test configuration subcommand */
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,
/* Frame filter operations for other BSSs/unassociated STAs */
QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170,
QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171,
QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT = 172,
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG = 173,
QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,
QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG = 175,
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS = 176,
QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE = 177,
QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178,
QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179,
Add QCA vendor command to support beacon reporting feature Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING to implement beacon reporting feature. Different operations required to implement this feature can be specified in QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. Userspace requests the driver/firmware to periodically report received Beacon frames whose BSSID matches the current connected BSS's MAC address. If userspace requests the driver/firmware to send beacon reports actively, the driver encapsulates the details of the beacon in an event and sends it to userspace asynchronously. Otherwise, the driver will only update the beacon in cfg80211 scan cache but will not send any event to userspace. If this command is not issued, the current behavior of the driver/firmware is to update the cfg80211 scan cache only when there is a scan issued by the host in progress or whenever there is a change in IEs of the Beacon frames from the current connected BSS. The userspace requests the driver/firmware to stop reporting beacons when reporting is not required anymore. If the driver/firmware is not able to receive Beacon frames because of other Wi-Fi operations such as off-channel activities, etc., the driver/firmware sends a pause event to userspace and stops reporting Beacon frames. The driver/firmware indicates whether the beacon reporting automatically resumes later by using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If userspace doesn't want the beacon reporting to be resumed automatically, userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to the driver to stop beacon reporting. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 21:23:05 +02:00
QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING = 180,
QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP = 181,
QCA_NL80211_VENDOR_SUBCMD_OEM_DATA = 182,
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT = 183,
QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE = 184,
QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE = 185,
QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO = 186,
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187,
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
};
enum qca_wlan_vendor_attr {
QCA_WLAN_VENDOR_ATTR_INVALID = 0,
/* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
QCA_WLAN_VENDOR_ATTR_DFS = 1,
/* Used only when driver sends vendor events to the userspace under the
* command QCA_NL80211_VENDOR_SUBCMD_NAN. Not used when userspace sends
* commands to the driver.
*/
QCA_WLAN_VENDOR_ATTR_NAN = 2,
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3,
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
QCA_WLAN_VENDOR_ATTR_IFINDEX = 4,
/* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
* by enum qca_roaming_policy.
*/
QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
QCA_WLAN_VENDOR_ATTR_TEST = 8,
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
/* Unsigned 32-bit value. */
QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
/* Unsigned 32-bit value from enum qca_set_band. */
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
/* Dummy (NOP) attribute for 64 bit padding */
QCA_WLAN_VENDOR_ATTR_PAD = 13,
/* Unique FTM session cookie (Unsigned 64 bit). Specified in
* QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in
* the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE.
*/
QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14,
/* Indoor location capabilities, returned by
* QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA.
* see enum qca_wlan_vendor_attr_loc_capa.
*/
QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15,
/* Array of nested attributes containing information about each peer
* in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info
* for supported attributes for each peer.
*/
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16,
/* Array of nested attributes containing measurement results for
* one or more peers, reported by the
* QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event.
* See enum qca_wlan_vendor_attr_peer_result for list of supported
* attributes.
*/
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17,
/* Flag attribute for enabling or disabling responder functionality. */
QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18,
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
* command to specify the LCI report that will be sent by
* the responder during a measurement exchange. The format is
* defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10.
*/
QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19,
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
* command to specify the location civic report that will
* be sent by the responder during a measurement exchange.
* The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13.
*/
QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20,
/* Session/measurement completion status code,
* reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT
* see enum qca_vendor_attr_loc_session_status.
*/
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21,
/* Initial dialog token used by responder (0 if not specified),
* unsigned 8 bit value.
*/
QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22,
/* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS
* and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if
* AOA measurements are needed as part of an FTM session.
* Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See
* enum qca_wlan_vendor_attr_aoa_type.
*/
QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23,
/* A bit mask (unsigned 32 bit value) of antenna arrays used
* by indoor location measurements. Refers to the antenna
* arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS.
*/
QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24,
/* AOA measurement data. Its contents depends on the AOA measurement
* type and antenna array mask:
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values,
* phase of the strongest CIR path for each antenna in the measured
* array(s).
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16
* values, phase and amplitude of the strongest CIR path for each
* antenna in the measured array(s).
*/
QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25,
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
* to specify the chain number (unsigned 32 bit value) to inquire
* the corresponding antenna RSSI value
*/
QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26,
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
* to report the specific antenna RSSI value (unsigned 32 bit value)
*/
QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27,
/* Frequency in MHz, various uses. Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_FREQ = 28,
/* TSF timer value, unsigned 64 bit value.
* May be returned by various commands.
*/
QCA_WLAN_VENDOR_ATTR_TSF = 29,
/* DMG RF sector index, unsigned 16 bit number. Valid values are
* 0..127 for sector indices or 65535 as special value used to
* unlock sector selection in
* QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR.
*/
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30,
/* DMG RF sector type, unsigned 8 bit value. One of the values
* in enum qca_wlan_vendor_attr_dmg_rf_sector_type.
*/
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31,
/* Bitmask of DMG RF modules for which information is requested. Each
* bit corresponds to an RF module with the same index as the bit
* number. Unsigned 32 bit number but only low 8 bits can be set since
* all DMG chips currently have up to 8 RF modules.
*/
QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32,
/* Array of nested attributes where each entry is DMG RF sector
* configuration for a single RF module.
* Attributes for each entry are taken from enum
* qca_wlan_vendor_attr_dmg_rf_sector_cfg.
* Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG
* and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG.
*/
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33,
/* Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command
* to report frame aggregation statistics to userspace.
*/
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34,
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35,
/* Unsigned 8-bit value representing MBO transition reason code as
* provided by the AP used by subcommand
* QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is
* specified by the userspace in the request to the driver.
*/
QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36,
/* Array of nested attributes, BSSID and status code, used by subcommand
* QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each
* entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info.
* The userspace space specifies the list/array of candidate BSSIDs in
* the order of preference in the request. The driver specifies the
* status code, for each BSSID in the list, in the response. The
* acceptable candidates are listed in the order preferred by the
* driver.
*/
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37,
/* Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command
* See enum qca_wlan_vendor_attr_brp_ant_limit_mode.
*/
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE = 38,
/* Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command
* to define the number of antennas to use for BRP.
* different purpose in each ANT_LIMIT_MODE:
* DISABLE - ignored
* EFFECTIVE - upper limit to number of antennas to be used
* FORCE - exact number of antennas to be used
* unsigned 8 bit value
*/
QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39,
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
* to report the corresponding antenna index to the chain RSSI value
*/
QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40,
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command to report
* the specific antenna EVM value (unsigned 32 bit value). With a
* determinate group of antennas, the driver specifies the EVM value
* for each antenna ID, and application extract them in user space.
*/
QCA_WLAN_VENDOR_ATTR_CHAIN_EVM = 41,
/*
* Used in QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE command to report
* wlan firmware current state. FW state is an unsigned 8 bit value,
* one of the values in enum qca_wlan_vendor_attr_fw_state.
*/
QCA_WLAN_VENDOR_ATTR_FW_STATE = 42,
/* keep last */
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
};
enum qca_roaming_policy {
QCA_ROAMING_NOT_ALLOWED,
QCA_ROAMING_ALLOWED_WITHIN_ESS,
};
/**
* enum qca_roam_reason - Represents the reason codes for roaming. Used by
* QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON.
*
* @QCA_ROAM_REASON_UNKNOWN: Any reason that do not classify under the below
* reasons.
*
* @QCA_ROAM_REASON_PER: Roam triggered when packet error rates (PER) breached
* the configured threshold.
*
* @QCA_ROAM_REASON_BEACON_MISS: Roam triggered due to the continuous configured
* beacon misses from the then connected AP.
*
* @QCA_ROAM_REASON_POOR_RSSI: Roam triggered due to the poor RSSI reported
* by the connected AP.
*
* @QCA_ROAM_REASON_BETTER_RSSI: Roam triggered for finding a BSS with a better
* RSSI than the connected BSS. Here the RSSI of the current BSS is not poor.
*
* @QCA_ROAM_REASON_CONGESTION: Roam triggered considering the connected channel
* or environment being very noisy or congested.
*
* @QCA_ROAM_REASON_EXPLICIT_REQUEST: Roam triggered due to an explicit request
* from the user (user space).
*
* @QCA_ROAM_REASON_BTM: Roam triggered due to BTM Request frame received from
* the connected AP.
*
* @QCA_ROAM_REASON_BSS_LOAD: Roam triggered due to the channel utilization
* breaching out the configured threshold.
*/
enum qca_roam_reason {
QCA_ROAM_REASON_UNKNOWN,
QCA_ROAM_REASON_PER,
QCA_ROAM_REASON_BEACON_MISS,
QCA_ROAM_REASON_POOR_RSSI,
QCA_ROAM_REASON_BETTER_RSSI,
QCA_ROAM_REASON_CONGESTION,
QCA_ROAM_REASON_USER_TRIGGER,
QCA_ROAM_REASON_BTM,
QCA_ROAM_REASON_BSS_LOAD,
};
enum qca_wlan_vendor_attr_roam_auth {
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS,
/* Indicates the status of re-association requested by user space for
* the BSSID specified by QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID.
* Type u16.
* Represents the status code from AP. Use
* %WLAN_STATUS_UNSPECIFIED_FAILURE if the device cannot give you the
* real status code for failures.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS,
/* This attribute indicates that the old association was maintained when
* a re-association is requested by user space and that re-association
* attempt fails (i.e., cannot connect to the requested BSS, but can
* remain associated with the BSS with which the association was in
* place when being requested to roam). Used along with
* WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS to indicate the current
* re-association status. Type flag.
* This attribute is applicable only for re-association failure cases.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION,
/* This attribute specifies the PMK if one was newly generated during
* FILS roaming. This is added to the PMKSA cache and is used in
* subsequent connections with PMKSA caching.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK = 11,
/* This attribute specifies the PMKID used/generated for the current
* FILS roam. This is used in subsequent connections with PMKSA caching.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID = 12,
/* A 16-bit unsigned value specifying the next sequence number to use
* in ERP message in the currently associated realm. This is used in
* doing subsequent ERP based connections in the same realm.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM = 13,
/* A 16-bit unsigned value representing the reasons for the roaming.
* Defined by enum qca_roam_reason.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON = 14,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
};
enum qca_wlan_vendor_attr_p2p_listen_offload {
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
/* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
* of the social channels.
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
/* A 32-bit unsigned value; the P2P listen offload period (ms).
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
/* A 32-bit unsigned value; the P2P listen interval duration (ms).
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
/* A 32-bit unsigned value; number of interval times the firmware needs
* to run the offloaded P2P listen operation before it stops.
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
/* An array of arbitrary binary data with one or more 8-byte values.
* The device types include both primary and secondary device types.
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
/* An array of unsigned 8-bit characters; vendor information elements.
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
/* A 32-bit unsigned value; a control flag to indicate whether listen
* results need to be flushed to wpa_supplicant.
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
/* A 8-bit unsigned value; reason code for P2P listen offload stop
* event.
*/
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
/* keep last */
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_acs_offload - Defines attributes to be used with
* vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: Required (u8).
* Used with event to notify the primary channel number selected in ACS
* operation.
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL is deprecated; use
* QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY instead.
* To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL
* is still used if either of the driver or user space application doesn't
* support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: Required (u8).
* Used with event to notify the secondary channel number selected in ACS
* operation.
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is deprecated; use
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY instead.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is still used if either of
* the driver or user space application doesn't support 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: Required (u8).
* (a) Used with command to configure hw_mode from
* enum qca_wlan_vendor_acs_hw_mode for ACS operation.
* (b) Also used with event to notify the hw_mode of selected primary channel
* in ACS operation.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: Flag attribute.
* Used with command to configure ACS operation for HT mode.
* Disable (flag attribute not present) - HT disabled and
* Enable (flag attribute present) - HT enabled.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: Flag attribute.
* Used with command to configure ACS operation for HT40 mode.
* Disable (flag attribute not present) - HT40 disabled and
* Enable (flag attribute present) - HT40 enabled.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED: Flag attribute.
* Used with command to configure ACS operation for VHT mode.
* Disable (flag attribute not present) - VHT disabled and
* Enable (flag attribute present) - VHT enabled.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH: Optional (u16) with command and
* mandatory with event.
* If specified in command path, ACS operation is configured with the given
* channel width (in MHz).
* In event path, specifies the channel width of the primary channel selected.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST: Required and type is NLA_UNSPEC.
* Used with command to configure channel list using an array of
* channel numbers (u8).
* Note: If both the driver and user-space application supports the 6 GHz band,
* the driver mandates use of QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST whereas
* QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST is optional.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL: Required (u8).
* Used with event to notify the VHT segment 0 center channel number selected in
* ACS operation. The value is the index of the channel center frequency for
* 20 MHz, 40 MHz, and 80 MHz channels. The value is the center frequency index
* of the primary 80 MHz segment for 160 MHz and 80+80 MHz channels.
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is deprecated; use
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY instead.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is still used if either of
* the driver or user space application doesn't support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL: Required (u8).
* Used with event to notify the VHT segment 1 center channel number selected in
* ACS operation. The value is zero for 20 MHz, 40 MHz, and 80 MHz channels.
* The value is the index of the channel center frequency for 160 MHz channels
* and the center frequency index of the secondary 80 MHz segment for 80+80 MHz
* channels.
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is deprecated; use
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY instead.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is still used if either of
* the driver or user space application doesn't support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST: Required and type is NLA_UNSPEC.
* Used with command to configure the channel list using an array of channel
* center frequencies in MHz (u32).
* Note: If both the driver and user-space application supports the 6 GHz band,
* the driver first parses the frequency list and if it fails to get a frequency
* list, parses the channel list specified using
* QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST (considers only 2 GHz and 5 GHz channels in
* QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST).
*
* @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY: Required (u32).
* Used with event to notify the primary channel center frequency (MHz) selected
* in ACS operation.
* Note: If the driver supports the 6 GHz band, the event sent from the driver
* includes this attribute along with QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY: Required (u32).
* Used with event to notify the secondary channel center frequency (MHz)
* selected in ACS operation.
* Note: If the driver supports the 6 GHz band, the event sent from the driver
* includes this attribute along with
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY: Required (u32).
* Used with event to notify the VHT segment 0 center channel frequency (MHz)
* selected in ACS operation.
* Note: If the driver supports the 6 GHz band, the event sent from the driver
* includes this attribute along with
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY: Required (u32).
* Used with event to notify the VHT segment 1 center channel frequency (MHz)
* selected in ACS operation.
* Note: If the driver supports the 6 GHz band, the event sent from the driver
* includes this attribute along with
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED: Flag attribute.
* Used with command to notify the driver of EDMG request for ACS
* operation.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL: Optional (u8).
* Used with event to notify the EDMG channel number selected in ACS
* operation.
* EDMG primary channel is indicated by QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL
*/
enum qca_wlan_vendor_attr_acs_offload {
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL = 1,
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL = 2,
QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE = 3,
QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED = 4,
QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED = 5,
QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED = 6,
QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH = 7,
QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST = 8,
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL = 9,
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL = 10,
QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST = 11,
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY = 12,
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY = 13,
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY = 14,
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY = 15,
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED = 16,
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL = 17,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ACS_MAX =
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_acs_hw_mode - Defines HW mode to be used with the
* vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS.
*
* @QCA_ACS_MODE_IEEE80211B: 802.11b mode
* @QCA_ACS_MODE_IEEE80211G: 802.11g mode
* @QCA_ACS_MODE_IEEE80211A: 802.11a mode
* @QCA_ACS_MODE_IEEE80211AD: 802.11ad mode
* @QCA_ACS_MODE_IEEE80211ANY: all modes
* @QCA_ACS_MODE_IEEE80211AX: 802.11ax mode
*/
enum qca_wlan_vendor_acs_hw_mode {
QCA_ACS_MODE_IEEE80211B,
QCA_ACS_MODE_IEEE80211G,
QCA_ACS_MODE_IEEE80211A,
QCA_ACS_MODE_IEEE80211AD,
QCA_ACS_MODE_IEEE80211ANY,
QCA_ACS_MODE_IEEE80211AX,
};
/**
* enum qca_wlan_vendor_features - Vendor device/driver feature flags
*
* @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
* management offload, a mechanism where the station's firmware
* does the exchange with the AP to establish the temporal keys
* after roaming, rather than having the user space wpa_supplicant do it.
* @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
* band selection based on channel selection results.
* @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
* simultaneous off-channel operations.
* @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
* Listen offload; a mechanism where the station's firmware takes care of
* responding to incoming Probe Request frames received from other P2P
* Devices whilst in Listen state, rather than having the user space
* wpa_supplicant do it. Information from received P2P requests are
* forwarded from firmware to host whenever the host processor wakes up.
* @QCA_WLAN_VENDOR_FEATURE_OCE_STA: Device supports all OCE non-AP STA
* specific features.
* @QCA_WLAN_VENDOR_FEATURE_OCE_AP: Device supports all OCE AP specific
* features.
* @QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON: Device supports OCE STA-CFON
* specific features only. If a Device sets this bit but not the
* %QCA_WLAN_VENDOR_FEATURE_OCE_AP, the userspace shall assume that
* this Device may not support all OCE AP functionalities but can support
* only OCE STA-CFON functionalities.
* @QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY: Device supports self
* managed regulatory.
* @QCA_WLAN_VENDOR_FEATURE_TWT: Device supports TWT (Target Wake Time).
* @QCA_WLAN_VENDOR_FEATURE_11AX: Device supports 802.11ax (HE)
* @QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT: Device supports 6 GHz band operation
* @QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG: Device is capable of receiving
* and applying thermal configuration through
* %QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL and
* %QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW attributes from
* userspace.
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
*/
enum qca_wlan_vendor_features {
QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
QCA_WLAN_VENDOR_FEATURE_OCE_STA = 4,
QCA_WLAN_VENDOR_FEATURE_OCE_AP = 5,
QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON = 6,
QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY = 7,
QCA_WLAN_VENDOR_FEATURE_TWT = 8,
QCA_WLAN_VENDOR_FEATURE_11AX = 9,
QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT = 10,
QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG = 11,
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
};
/**
* enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
*
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
* the offloaded data.
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
* data.
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
* indication.
*/
enum qca_wlan_vendor_attr_data_offload_ind {
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
/* keep last */
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_ocb_set_config - Vendor subcmd attributes to set
* OCB config
*
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_COUNT: Number of channels in the
* configuration
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_SIZE: Size of the schedule
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_ARRAY: Array of channels
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_ARRAY: Array of channels to be
* scheduled
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_CHANNEL_ARRAY: Array of NDL channel
* information
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_ACTIVE_STATE_ARRAY: Array of NDL
* active state configuration
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_FLAGS: Configuration flags such as
* OCB_CONFIG_FLAG_80211_FRAME_MODE
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_DEF_TX_PARAM: Default TX parameters to
* use in the case that a packet is sent without a TX control header
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_TA_MAX_DURATION: Max duration after the
* last TA received that the local time set by TA is synchronous to other
* communicating OCB STAs.
*/
enum qca_wlan_vendor_attr_ocb_set_config {
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_COUNT = 1,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_SIZE = 2,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_ARRAY = 3,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_ARRAY = 4,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_CHANNEL_ARRAY = 5,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_ACTIVE_STATE_ARRAY = 6,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_FLAGS = 7,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_DEF_TX_PARAM = 8,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_TA_MAX_DURATION = 9,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_ocb_set_utc_time - Vendor subcmd attributes to set
* UTC time
*
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_VALUE: The UTC time as an array of
* 10 bytes
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_ERROR: The time error as an array of
* 5 bytes
*/
enum qca_wlan_vendor_attr_ocb_set_utc_time {
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_VALUE = 1,
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_ERROR = 2,
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_MAX =
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_ocb_start_timing_advert - Vendor subcmd attributes
* to start sending timing advert frames
*
* @QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_CHANNEL_FREQ: Cannel frequency
* on which to send the frames
* @QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_REPEAT_RATE: Number of times
* the frame is sent in 5 seconds
*/
enum qca_wlan_vendor_attr_ocb_start_timing_advert {
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_CHANNEL_FREQ = 1,
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_REPEAT_RATE = 2,
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_MAX =
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_ocb_stop_timing_advert - Vendor subcmd attributes
* to stop timing advert
*
* @QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_CHANNEL_FREQ: The channel
* frequency on which to stop the timing advert
*/
enum qca_wlan_vendor_attr_ocb_stop_timing_advert {
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_CHANNEL_FREQ = 1,
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_MAX =
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_ocb_get_tsf_response - Vendor subcmd attributes to
* get TSF timer value
*
* @QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_HIGH: Higher 32 bits of the
* timer
* @QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_LOW: Lower 32 bits of the timer
*/
enum qca_wlan_vendor_attr_ocb_get_tsf_resp {
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_HIGH = 1,
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_LOW = 2,
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_MAX =
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_AFTER_LAST - 1
};
enum qca_vendor_attr_get_preferred_freq_list {
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
/* A 32-unsigned value; the interface type/mode for which the preferred
* frequency list is requested (see enum qca_iface_type for possible
* values); used in GET_PREFERRED_FREQ_LIST command from user-space to
* kernel and in the kernel response back to user-space.
*/
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
/* An array of 32-unsigned values; values are frequency (MHz); sent
* from kernel space to user space.
*/
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
/* An array of nested values as per enum qca_wlan_vendor_attr_pcl
* attribute. Each element contains frequency (MHz), weight, and flag
* bit mask indicating how the frequency should be used in P2P
* negotiation; sent from kernel space to user space.
*/
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_WEIGHED_PCL,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
};
enum qca_vendor_attr_probable_oper_channel {
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
/* 32-bit unsigned value; indicates the connection/iface type likely to
* come on this channel (see enum qca_iface_type).
*/
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
/* 32-bit unsigned value; the frequency (MHz) of the probable channel */
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
/* keep last */
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
};
enum qca_iface_type {
QCA_IFACE_TYPE_STA,
QCA_IFACE_TYPE_AP,
QCA_IFACE_TYPE_P2P_CLIENT,
QCA_IFACE_TYPE_P2P_GO,
QCA_IFACE_TYPE_IBSS,
QCA_IFACE_TYPE_TDLS,
};
enum qca_set_band {
QCA_SETBAND_AUTO,
QCA_SETBAND_5G,
QCA_SETBAND_2G,
};
/**
* enum qca_access_policy - Access control policy
*
* Access control policy is applied on the configured IE
* (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE).
* To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY.
*
* @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match
* the specific configuration (IE) set, i.e., allow all the
* connections which do not match the configuration.
* @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match
* the specific configuration (IE) set, i.e., deny all the
* connections which do not match the configuration.
*/
enum qca_access_policy {
QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED,
QCA_ACCESS_POLICY_DENY_UNLESS_LISTED,
};
/**
* enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture
* @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32)
* @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value
* @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized
* SOC timer value at TSF capture
*/
enum qca_vendor_attr_tsf_cmd {
QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_TSF_CMD,
QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE,
QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE,
QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TSF_MAX =
QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1
};
/**
* enum qca_tsf_operation: TSF driver commands
* @QCA_TSF_CAPTURE: Initiate TSF Capture
* @QCA_TSF_GET: Get TSF capture value
* @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value
*/
enum qca_tsf_cmd {
QCA_TSF_CAPTURE,
QCA_TSF_GET,
QCA_TSF_SYNC_GET,
};
/**
* enum qca_vendor_attr_wisa_cmd
* @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32)
* WISA setup vendor commands
*/
enum qca_vendor_attr_wisa_cmd {
QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_WISA_MODE,
QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WISA_MAX =
QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1
};
/* IEEE 802.11 Vendor Specific elements */
/**
* enum qca_vendor_element_id - QCA Vendor Specific element types
*
* These values are used to identify QCA Vendor Specific elements. The
* payload of the element starts with the three octet OUI (OUI_QCA) and
* is followed by a single octet type which is defined by this enum.
*
* @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
* This element can be used to specify preference order for supported
* channels. The channels in this list are in preference order (the first
* one has the highest preference) and are described as a pair of
* (global) Operating Class and Channel Number (each one octet) fields.
*
* This extends the standard P2P functionality by providing option to have
* more than one preferred operating channel. When this element is present,
* it replaces the preference indicated in the Operating Channel attribute.
* For supporting other implementations, the Operating Channel attribute is
* expected to be used with the highest preference channel. Similarly, all
* the channels included in this Preferred channel list element are
* expected to be included in the Channel List attribute.
*
* This vendor element may be included in GO Negotiation Request, P2P
* Invitation Request, and Provision Discovery Request frames.
*
* @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element.
* This element can be used for pre-standard publication testing of HE
* before P802.11ax draft assigns the element ID. The payload of this
* vendor specific element is defined by the latest P802.11ax draft.
* Please note that the draft is still work in progress and this element
* payload is subject to change.
*
* @QCA_VENDOR_ELEM_HE_OPER: HE Operation element.
* This element can be used for pre-standard publication testing of HE
* before P802.11ax draft assigns the element ID. The payload of this
* vendor specific element is defined by the latest P802.11ax draft.
* Please note that the draft is still work in progress and this element
* payload is subject to change.
*
* @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set
* element).
* This element can be used for pre-standard publication testing of HE
* before P802.11ax draft assigns the element ID extension. The payload of
* this vendor specific element is defined by the latest P802.11ax draft
* (not including the Element ID Extension field). Please note that the
* draft is still work in progress and this element payload is subject to
* change.
*
* @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element.
* This element can be used for pre-standard publication testing of HE
* before P802.11ax draft assigns the element ID extension. The payload of
* this vendor specific element is defined by the latest P802.11ax draft
* (not including the Element ID Extension field). Please note that the
* draft is still work in progress and this element payload is subject to
* change.
*
* @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element.
* This element can be used for pre-standard publication testing of HE
* before P802.11ax draft assigns the element ID extension. The payload of
* this vendor specific element is defined by the latest P802.11ax draft
* (not including the Element ID Extension field). Please note that the
* draft is still work in progress and this element payload is subject to
* change.
*/
enum qca_vendor_element_id {
QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
QCA_VENDOR_ELEM_HE_CAPAB = 1,
QCA_VENDOR_ELEM_HE_OPER = 2,
QCA_VENDOR_ELEM_RAPS = 3,
QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4,
QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5,
};
/**
* enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes
*
* @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan
* @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes
* with frequencies to be scanned (in MHz)
* @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned
* @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
* rates to be included
* @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
* at non CCK rate in 2GHz band
* @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
* @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
* driver for the specific scan request
* @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
* request decoded as in enum scan_status
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
* scan flag is set
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
* randomisation
* @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the
* specific BSSID to scan for.
* @QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME: Unsigned 64-bit dwell time in
* microseconds. This is a common value which applies across all
* frequencies specified by QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES.
*/
enum qca_wlan_vendor_attr_scan {
QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
QCA_WLAN_VENDOR_ATTR_SCAN_IE = 1,
QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES = 2,
QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS = 3,
QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES = 4,
QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE = 5,
QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS = 6,
QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE = 7,
QCA_WLAN_VENDOR_ATTR_SCAN_STATUS = 8,
QCA_WLAN_VENDOR_ATTR_SCAN_MAC = 9,
QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK = 10,
QCA_WLAN_VENDOR_ATTR_SCAN_BSSID = 11,
QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME = 12,
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
};
/**
* enum scan_status - Specifies the valid values the vendor scan attribute
* QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
*
* @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
* new scan results
* @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
*/
enum scan_status {
VENDOR_SCAN_STATUS_NEW_RESULTS,
VENDOR_SCAN_STATUS_ABORTED,
VENDOR_SCAN_STATUS_MAX,
};
/**
* enum qca_vendor_attr_ota_test - Specifies the values for vendor
* command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST
* @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test
*/
enum qca_vendor_attr_ota_test {
QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID,
/* 8-bit unsigned value to indicate if OTA test is enabled */
QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX =
QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1
};
/**
* enum qca_vendor_attr_txpower_scale - vendor sub commands index
*
* @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value
*/
enum qca_vendor_attr_txpower_scale {
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID,
/* 8-bit unsigned value to indicate the scaling of tx power */
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX =
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1
};
/**
* enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease
*
* These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB.
*/
enum qca_vendor_attr_txpower_decr_db {
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID,
/* 8-bit unsigned value to indicate the reduction of TX power in dB for
* a virtual interface.
*/
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX =
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1
};
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
*/
enum qca_wlan_vendor_attr_config {
QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0,
/* Unsigned 32-bit value to set the DTIM period.
* Whether the wifi chipset wakes at every dtim beacon or a multiple of
* the DTIM period. If DTIM is set to 3, the STA shall wake up every 3
* DTIM beacons.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM = 1,
/* Unsigned 32-bit value to set the wifi_iface stats averaging factor
* used to calculate statistics like average the TSF offset or average
* number of frame leaked.
* For instance, upon Beacon frame reception:
* current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000
* For instance, when evaluating leaky APs:
* current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2,
/* Unsigned 32-bit value to configure guard time, i.e., when
* implementing IEEE power management based on frame control PM bit, how
* long the driver waits before shutting down the radio and after
* receiving an ACK frame for a Data frame with PM bit set.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3,
/* Unsigned 32-bit value to change the FTM capability dynamically */
QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4,
/* Unsigned 16-bit value to configure maximum TX rate dynamically */
QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5,
/* Unsigned 32-bit value to configure the number of continuous
* Beacon Miss which shall be used by the firmware to penalize
* the RSSI.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6,
/* Unsigned 8-bit value to configure the channel avoidance indication
* behavior. Firmware to send only one indication and ignore duplicate
* indications when set to avoid multiple Apps wakeups.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7,
/* 8-bit unsigned value to configure the maximum TX MPDU for
* aggregation.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8,
/* 8-bit unsigned value to configure the maximum RX MPDU for
* aggregation.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9,
/* 8-bit unsigned value to configure the Non aggregrate/11g sw
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10,
/* 8-bit unsigned value to configure the aggregrate sw
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11,
/* 8-bit unsigned value to configure the MGMT frame
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12,
/* 8-bit unsigned value to configure the CTRL frame
* retry threshold (0 disable, 31 max).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13,
/* 8-bit unsigned value to configure the propagation delay for
* 2G/5G band (0~63, units in us)
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14,
/* Unsigned 32-bit value to configure the number of unicast TX fail
* packet count. The peer is disconnected once this threshold is
* reached.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15,
/* Attribute used to set scan default IEs to the driver.
*
* These IEs can be used by scan operations that will be initiated by
* the driver/firmware.
*
* For further scan requests coming to the driver, these IEs should be
* merged with the IEs received along with scan request coming to the
* driver. If a particular IE is present in the scan default IEs but not
* present in the scan request, then that IE should be added to the IEs
* sent in the Probe Request frames for that scan request.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16,
/* Unsigned 32-bit attribute for generic commands */
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17,
/* Unsigned 32-bit value attribute for generic commands */
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18,
/* Unsigned 32-bit data attribute for generic command response */
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19,
/* Unsigned 32-bit length attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20,
/* Unsigned 32-bit flags attribute for
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21,
/* Unsigned 32-bit, defining the access policy.
* See enum qca_access_policy. Used with
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22,
/* Sets the list of full set of IEs for which a specific access policy
* has to be applied. Used along with
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
* Zero length payload can be used to clear this access constraint.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23,
/* Unsigned 32-bit, specifies the interface index (netdev) for which the
* corresponding configurations are applied. If the interface index is
* not specified, the configurations are attributed to the respective
* wiphy.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24,
/* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */
QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
/* 8-bit unsigned value to configure the driver and below layers to
* ignore the assoc disallowed set by APs while connecting
* 1-Ignore, 0-Don't ignore
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
/* 32-bit unsigned value to trigger antenna diversity features:
* 1-Enable, 0-Disable
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27,
/* 32-bit unsigned value to configure specific chain antenna */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28,
/* 32-bit unsigned value to trigger cycle selftest
* 1-Enable, 0-Disable
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29,
/* 32-bit unsigned to configure the cycle time of selftest
* the unit is micro-second
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30,
/* 32-bit unsigned value to set reorder timeout for AC_VO */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31,
/* 32-bit unsigned value to set reorder timeout for AC_VI */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32,
/* 32-bit unsigned value to set reorder timeout for AC_BE */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33,
/* 32-bit unsigned value to set reorder timeout for AC_BK */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34,
/* 6-byte MAC address to point out the specific peer */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35,
/* 32-bit unsigned value to set window size for specific peer */
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36,
/* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37,
/* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38,
/* 32-bit unsigned value to configure 5 or 10 MHz channel width for
* station device while in disconnect state. The attribute use the
* value of enum nl80211_chan_width: NL80211_CHAN_WIDTH_5 means 5 MHz,
* NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or
* 10 MHz channel width, the station will not connect to a BSS using 20
* MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to
* clear this constraint.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39,
/* 32-bit unsigned value to configure the propagation absolute delay
* for 2G/5G band (units in us)
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40,
/* 32-bit unsigned value to set probe period */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41,
/* 32-bit unsigned value to set stay period */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD = 42,
/* 32-bit unsigned value to set snr diff */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SNR_DIFF = 43,
/* 32-bit unsigned value to set probe dwell time */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_DWELL_TIME = 44,
/* 32-bit unsigned value to set mgmt snr weight */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT = 45,
/* 32-bit unsigned value to set data snr weight */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT = 46,
/* 32-bit unsigned value to set ack snr weight */
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT = 47,
/* 32-bit unsigned value to configure the listen interval.
* This is in units of beacon intervals. This configuration alters
* the negotiated listen interval with the AP during the connection.
* It is highly recommended to configure a value less than or equal to
* the one negotiated during the association. Configuring any greater
* value can have adverse effects (frame loss, AP disassociating STA,
* etc.).
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL = 48,
/*
* 8 bit unsigned value that is set on an AP/GO virtual interface to
* disable operations that would cause the AP/GO to leave its operating
* channel.
*
* This will restrict the scans to the AP/GO operating channel and the
* channels of the other band, if DBS is supported.A STA/CLI interface
* brought up after this setting is enabled, will be restricted to
* connecting to devices only on the AP/GO interface's operating channel
* or on the other band in DBS case. P2P supported channel list is
* modified, to only include AP interface's operating-channel and the
* channels of the other band if DBS is supported.
*
* These restrictions are only applicable as long as the AP/GO interface
* is alive. If the AP/GO interface is brought down then this
* setting/restriction is forgotten.
*
* If this variable is set on an AP/GO interface while a multi-channel
* concurrent session is active, it has no effect on the operation of
* the current interfaces, other than restricting the scan to the AP/GO
* operating channel and the other band channels if DBS is supported.
* However, if the STA is brought down and restarted then the new STA
* connection will either be formed on the AP/GO channel or on the
* other band in a DBS case. This is because of the scan being
* restricted on these channels as mentioned above.
*
* 1-Restrict / 0-Don't restrict offchannel operations.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL = 49,
/*
* 8 bit unsigned value to enable/disable LRO (Large Receive Offload)
* on an interface.
* 1 - Enable, 0 - Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_LRO = 50,
/*
* 8 bit unsigned value to globally enable/disable scan
* 1 - Enable, 0 - Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51,
/* 8-bit unsigned value to set the total beacon miss count
* This parameter will set the total beacon miss count.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52,
/* Unsigned 32-bit value to configure the number of continuous
* Beacon Miss which shall be used by the firmware to penalize
* the RSSI for BTC.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS_BTC = 53,
/* 8-bit unsigned value to configure the driver and below layers to
* enable/disable all FILS features.
* 0-enable, 1-disable
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54,
/* 16-bit unsigned value to configure the level of WLAN latency
* module. See enum qca_wlan_vendor_attr_config_latency_level.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL = 55,
/* 8-bit unsigned value indicating the driver to use the RSNE as-is from
* the connect interface. Exclusively used for the scenarios where the
* device is used as a test bed device with special functionality and
* not recommended for production. This helps driver to not validate the
* RSNE passed from user space and thus allow arbitrary IE data to be
* used for testing purposes.
* 1-enable, 0-disable.
* Applications set/reset this configuration. If not reset, this
* parameter remains in use until the driver is unloaded.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_RSN_IE = 56,
/* 8-bit unsigned value to trigger green Tx power saving.
* 1-Enable, 0-Disable
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GTX = 57,
/* Attribute to configure disconnect IEs to the driver.
* This carries an array of unsigned 8-bit characters.
*
* If this is configured, driver shall fill the IEs in disassoc/deauth
* frame.
* These IEs are expected to be considered only for the next
* immediate disconnection (disassoc/deauth frame) originated by
* the DUT, irrespective of the entity (user space/driver/firmware)
* triggering the disconnection.
* The host drivers are not expected to use the IEs set through
* this interface for further disconnections after the first immediate
* disconnection initiated post the configuration.
* If the IEs are also updated through cfg80211 interface (after the
* enhancement to cfg80211_disconnect), host driver is expected to
* take the union of IEs from both of these interfaces and send in
* further disassoc/deauth frames.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES = 58,
/* 8-bit unsigned value for ELNA bypass.
* 1-Enable, 0-Disable
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ELNA_BYPASS = 59,
/* 8-bit unsigned value. This attribute enables/disables the host driver
* to send the Beacon Report Response with failure reason for the
* scenarios where STA cannot honor the Beacon Report Request from AP.
* 1-Enable, 0-Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL = 60,
/* 8-bit unsigned value. This attribute enables/disables the host driver
* to send roam reason information in the Reassociation Request frame to
* the target AP when roaming within the same ESS.
* 1-Enable, 0-Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON = 61,
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1,
};
/* Compatibility defines for previously used incorrect enum
* qca_wlan_vendor_attr_config names. These values should not be used in any
* new implementation. */
#define QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES \
QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES
#define QCA_WLAN_VENDOR_ATTR_BEACON_REPORT_FAIL \
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL
/**
* enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
*
* @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Optional (u8)
* Channel number on which Access Point should restart.
* Note: If both the driver and user space application supports the 6 GHz band,
* this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY
* should be used.
* To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL
* is still used if either of the driver or user space application doesn't
* support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY: Optional (u32)
* Channel center frequency (MHz) on which the access point should restart.
*/
enum qca_wlan_vendor_attr_sap_config {
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL = 1,
/* List of frequencies on which AP is expected to operate.
* This is irrespective of ACS configuration. This list is a priority
* based one and is looked for before the AP is created to ensure the
* best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in
* the system.
*/
QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY = 3,
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP
* conditional channel switch
*/
enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
/* Priority based frequency list (an array of u32 values in host byte
* order)
*/
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
/* Status of the conditional switch (u32).
* 0: Success, Non-zero: Failure
*/
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
};
/**
* enum qca_wlan_gpio_attr - Parameters for GPIO configuration
*/
enum qca_wlan_gpio_attr {
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
/* Unsigned 32-bit attribute for GPIO command */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND,
/* Unsigned 32-bit attribute for GPIO PIN number to configure */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM,
/* Unsigned 32-bit attribute for GPIO value to configure */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE,
/* Unsigned 32-bit attribute for GPIO pull type */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE,
/* Unsigned 32-bit attribute for GPIO interrupt mode */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX =
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1
};
/**
* qca_wlan_set_qdepth_thresh_attr - Parameters for setting
* MSDUQ depth threshold per peer per tid in the target
*
* Associated Vendor Command:
* QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH
*/
enum qca_wlan_set_qdepth_thresh_attr {
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_INVALID = 0,
/* 6-byte MAC address */
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAC_ADDR,
/* Unsigned 32-bit attribute for holding the TID */
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_TID,
/* Unsigned 32-bit attribute for holding the update mask
* bit 0 - Update high priority msdu qdepth threshold
* bit 1 - Update low priority msdu qdepth threshold
* bit 2 - Update UDP msdu qdepth threshold
* bit 3 - Update Non UDP msdu qdepth threshold
* rest of bits are reserved
*/
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_UPDATE_MASK,
/* Unsigned 32-bit attribute for holding the threshold value */
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_VALUE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST,
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAX =
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST - 1,
};
/**
* enum qca_acs_dfs_mode - Defines different types of DFS channel
* configurations for ACS operation.
*
* @QCA_ACS_DFS_MODE_NONE: Refer to invalid DFS mode
* @QCA_ACS_DFS_MODE_ENABLE: Consider DFS channels in ACS operation
* @QCA_ACS_DFS_MODE_DISABLE: Do not consider DFS channels in ACS operation
* @QCA_ACS_DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in ACS operation
*/
enum qca_acs_dfs_mode {
QCA_ACS_DFS_MODE_NONE = 0,
QCA_ACS_DFS_MODE_ENABLE = 1,
QCA_ACS_DFS_MODE_DISABLE = 2,
QCA_ACS_DFS_MODE_DEPRIORITIZE = 3,
};
/**
* enum qca_wlan_vendor_attr_acs_config - Defines Configuration attributes
* used by the vendor command QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Required (u8)
* DFS mode for ACS operation from enum qca_acs_dfs_mode.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: Required (u8)
* channel number hint for ACS operation, if valid channel is specified then
* ACS operation gives priority to this channel.
* Note: If both the driver and user space application supports the 6 GHz band,
* this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT
* should be used.
* To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT
* is still used if either of the driver or user space application doesn't
* support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT: Required (u32).
* Channel center frequency (MHz) hint for ACS operation, if a valid center
* frequency is specified, ACS operation gives priority to this channel.
*/
enum qca_wlan_vendor_attr_acs_config {
QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE = 1,
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT = 2,
QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT = 3,
QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX =
QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability
*/
enum qca_wlan_vendor_attr_get_hw_capability {
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID,
/* Antenna isolation
* An attribute used in the response.
* The content of this attribute is encoded in a byte array. Each byte
* value is an antenna isolation value. The array length is the number
* of antennas.
*/
QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION,
/* Request HW capability
* An attribute used in the request.
* The content of this attribute is a u32 array for one or more of
* hardware capabilities (attribute IDs) that are being requested. Each
* u32 value has a value from this
* enum qca_wlan_vendor_attr_get_hw_capability
* identifying which capabilities are requested.
*/
QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY,
/* keep last */
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX =
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring
* offload which is an extension for LL_STATS.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms.
* If MAC counters do not exceed the threshold, FW will report monitored
* link layer counters periodically as this setting. The first report is
* always triggered by this timer.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99).
* For each MAC layer counter, FW holds two copies. One is the current value.
* The other is the last report. Once a current counter's increment is larger
* than the threshold, FW will indicate that counter to host even if the
* monitoring timer does not expire.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same
* failure code.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code
* 1: TX packet discarded
* 2: No ACK
* 3: Postpone
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold.
* Threshold for all monitored parameters. If per counter dedicated threshold
* is not enabled, this threshold will take effect.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this
* event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters
* Bit0: TX counter unit in MSDU
* Bit1: TX counter unit in MPDU
* Bit2: TX counter unit in PPDU
* Bit3: TX counter unit in byte
* Bit4: Dropped MSDUs
* Bit5: Dropped Bytes
* Bit6: MPDU retry counter
* Bit7: MPDU failure counter
* Bit8: PPDU failure counter
* Bit9: MPDU aggregation counter
* Bit10: MCS counter for ACKed MPDUs
* Bit11: MCS counter for Failed MPDUs
* Bit12: TX Delay counter
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters
* Bit0: MAC RX counter unit in MPDU
* Bit1: MAC RX counter unit in byte
* Bit2: PHY RX counter unit in PPDU
* Bit3: PHY RX counter unit in byte
* Bit4: Disorder counter
* Bit5: Retry counter
* Bit6: Duplication counter
* Bit7: Discard counter
* Bit8: MPDU aggregation size counter
* Bit9: MCS counter
* Bit10: Peer STA power state change (wake to sleep) counter
* Bit11: Peer STA power save counter, total time in PS mode
* Bit12: Probe request counter
* Bit13: Other management frames counter
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA
* Bit0: Idle time
* Bit1: TX time
* Bit2: time RX in current bss
* Bit3: Out of current bss time
* Bit4: Wireless medium busy time
* Bit5: RX in bad condition time
* Bit6: TX in bad condition time
* Bit7: time wlan card not available
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal
* Bit0: Per channel SNR counter
* Bit1: Per channel noise floor counter
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM:
* aggregation stats buffer length
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats
* buffer for ACKed MPDUs.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats
* buffer for failed MPDUs.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE:
* length of delay stats array.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets
* flagged as retransmissions
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets
* flagged as duplicated
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX
* packets discarded
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation
* stats buffer.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs
* stats buffer.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe
* requests received
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt
* frames received
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time
* there is no TX, nor RX, nor interference.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time
* transmitting packets.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time
* for receiving.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time
* interference detected.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time
* receiving packets with errors.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time
* TX no-ACK.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time
* the chip is unable to work in normal conditions.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time
* receiving packets in current BSS.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time
* receiving packets not in current BSS.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL:
* This is a container for per antenna signal stats.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME: u64
* Absolute timestamp from 1970/1/1, unit in ms. After receiving the
* message, user layer APP could call gettimeofday to get another
* timestamp and calculate transfer delay for the message.
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME: u32
* Real period for this measurement, unit in us.
*/
enum qca_wlan_vendor_attr_ll_stats_ext {
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0,
/* Attributes for configurations */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD,
QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD,
/* Peer STA power state change */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG,
/* TX failure event */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS,
/* MAC counters */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER,
/* Sub-attributes for PEER_AC_TX */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY,
/* Sub-attributes for PEER_AC_RX */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT,
/* Sub-attributes for CCA_BSS */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL,
/* sub-attribute for BSS_RX_TIME */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME,
/* Sub-attributes for PEER_SIGNAL */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF,
/* Sub-attributes for IFACE_BSS */
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX =
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1
};
/* Attributes for FTM commands and events */
/**
* enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities
*
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See
* enum qca_wlan_vendor_attr_loc_capa_flags.
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number
* of measurement sessions that can run concurrently.
* Default is one session (no session concurrency).
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique
* peers that are supported in running sessions. For example,
* if the value is 8 and maximum number of sessions is 2, you can
* have one session with 8 unique peers, or 2 sessions with 4 unique
* peers each, and so on.
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number
* of bursts per peer, as an exponent (2^value). Default is 0,
* meaning no multi-burst support.
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number
* of measurement exchanges allowed in a single burst.
* @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement
* types. A bit mask (unsigned 32 bit value), each bit corresponds
* to an AOA type as defined by enum qca_vendor_attr_aoa_type.
*/
enum qca_wlan_vendor_attr_loc_capa {
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID,
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS,
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS,
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS,
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP,
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST,
QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX =
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags
*
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver
* can be configured as an FTM responder (for example, an AP that
* services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
* will be supported if set.
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver
* can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION
* will be supported if set.
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
* supports immediate (ASAP) response.
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone
* AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS.
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports
* requesting AOA measurements as part of an FTM session.
*/
enum qca_wlan_vendor_attr_loc_capa_flags {
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0,
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1,
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2,
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3,
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4,
};
/**
* enum qca_wlan_vendor_attr_ftm_peer_info: Information about
* a single peer in a measurement session.
*
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related
* to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of
* FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0
* 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for
* list of supported attributes.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for
* secure measurement.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA
* measurement every <value> bursts. If 0 or not specified,
* AOA measurements will be disabled for this peer.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where
* the measurement frames are exchanged. Optional; if not
* specified, try to locate the peer in the kernel scan
* results cache and use frequency from there.
*/
enum qca_wlan_vendor_attr_ftm_peer_info {
QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ,
/* keep last */
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX =
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags,
* per-peer
*
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request
* immediate (ASAP) response from peer.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request
* LCI report from peer. The LCI report includes the absolute
* location of the peer in "official" coordinates (similar to GPS).
* See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request
* Location civic report from peer. The LCR includes the location
* of the peer in free-form format. See IEEE P802.11-REVmc/D7.0,
* 11.24.6.7 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set,
* request a secure measurement.
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided.
*/
enum qca_wlan_vendor_attr_ftm_peer_meas_flags {
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3,
};
/**
* enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters
*
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements
* to perform in a single burst.
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to
* perform, specified as an exponent (2^value).
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst
* instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167.
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts,
* as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must
* be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION.
*/
enum qca_wlan_vendor_attr_ftm_meas_param {
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID,
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST,
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP,
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION,
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD,
/* keep last */
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX =
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results
*
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported
* peer.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement
* request for this peer.
* See enum qca_wlan_vendor_attr_ftm_peer_result_status.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related
* to measurement results for this peer.
* See enum qca_wlan_vendor_attr_ftm_peer_result_flags.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when
* request failed and peer requested not to send an additional request
* for this number of seconds.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received
* from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
* 9.4.2.22.10.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when
* received from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
* 9.4.2.22.13.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer
* overridden some measurement request parameters. See
* enum qca_wlan_vendor_attr_ftm_meas_param.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement
* for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement
* results. Each entry is a nested attribute defined
* by enum qca_wlan_vendor_attr_ftm_meas.
*/
enum qca_wlan_vendor_attr_ftm_peer_result {
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS,
/* keep last */
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX =
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_ftm_peer_result_status
*
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results
* will be provided. Peer may have overridden some measurement parameters,
* in which case overridden parameters will be report by
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable
* of performing the measurement request. No more results will be sent
* for this peer in this session.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request
* failed, and requested not to send an additional request for number
* of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS
* attribute.
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation
* failed. Request was not sent over the air.
*/
enum qca_wlan_vendor_attr_ftm_peer_result_status {
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED,
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID,
};
/**
* enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags
* for measurement result, per-peer
*
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set,
* measurement completed for this peer. No more results will be reported
* for this peer in this session.
*/
enum qca_wlan_vendor_attr_ftm_peer_result_flags {
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0,
};
/**
* enum qca_vendor_attr_loc_session_status: Session completion status code
*
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed
* successfully.
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted
* by request.
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request
* was invalid and was not started.
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error
* and did not complete normally (for example out of resources).
*/
enum qca_vendor_attr_loc_session_status {
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK,
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED,
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID,
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED,
};
/**
* enum qca_wlan_vendor_attr_ftm_meas: Single measurement data
*
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as
* recorded by responder, in picoseconds.
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at
* initiator, in picoseconds.
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by
* initiator, in picoseconds.
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at
* responder, in picoseconds.
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded
* during this measurement exchange. Optional and will be provided if
* the hardware can measure it.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by
* responder. Not always provided.
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by
* responder. Not always provided.
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by
* initiator. Not always provided.
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by
* initiator. Not always provided.
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding.
*/
enum qca_wlan_vendor_attr_ftm_meas {
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD,
/* keep last */
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX =
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_aoa_type - AOA measurement type
*
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest
* CIR (channel impulse response) path for each antenna.
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude
* of the strongest CIR path for each antenna.
*/
enum qca_wlan_vendor_attr_aoa_type {
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE,
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP,
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX
};
/**
* enum qca_wlan_vendor_attr_encryption_test - Attributes to
* validate encryption engine
*
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute.
* This will be included if the request is for decryption; if not included,
* the request is treated as a request for encryption by default.
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value
* indicating the key cipher suite. Takes same values as
* NL80211_ATTR_KEY_CIPHER.
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value
* Key Id to be used for encryption
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values.
* Key (TK) to be used for encryption/decryption
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values.
* Packet number to be specified for encryption/decryption
* 6 bytes for TKIP/CCMP/GCMP.
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values
* representing the 802.11 packet (header + payload + FCS) that
* needs to be encrypted/decrypted.
* Encrypted/decrypted response from the driver will also be sent
* to userspace with the same attribute.
*/
enum qca_wlan_vendor_attr_encryption_test {
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX =
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of
* sector for DMG RF sector operations.
*
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector
*/
enum qca_wlan_vendor_attr_dmg_rf_sector_type {
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX
};
/**
* enum qca_wlan_vendor_attr_fw_state - State of firmware
*
* @QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR: FW is in bad state
* @QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE: FW is active
*/
enum qca_wlan_vendor_attr_fw_state {
QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR,
QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE,
QCA_WLAN_VENDOR_ATTR_FW_STATE_MAX
};
/**
* BRP antenna limit mode
*
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE: Disable BRP force
* antenna limit, BRP will be performed as usual.
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE: Define maximal
* antennas limit. the hardware may use less antennas than the
* maximum limit.
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE: The hardware will
* use exactly the specified number of antennas for BRP.
*/
enum qca_wlan_vendor_attr_brp_ant_limit_mode {
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE,
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE,
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE,
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_MAX
};
/**
* enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for
* DMG RF sector configuration for a single RF module.
* The values are defined in a compact way which closely matches
* the way it is stored in HW registers.
* The configuration provides values for 32 antennas and 8 distribution
* amplifiers, and together describes the characteristics of the RF
* sector - such as a beam in some direction with some gain.
*
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index
* of RF module for this configuration.
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge
* amplifier gain index. Unsigned 32 bit number containing
* bits for all 32 antennas.
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge
* amplifier gain index. Unsigned 32 bit number containing
* bits for all 32 antennas.
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge
* amplifier gain index. Unsigned 32 bit number containing
* bits for all 32 antennas.
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values
* for first 16 antennas, 2 bits per antenna.
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values
* for last 16 antennas, 2 bits per antenna.
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains
* DTYPE values (3 bits) for each distribution amplifier, followed
* by X16 switch bits for each distribution amplifier. There are
* total of 8 distribution amplifiers.
*/
enum qca_wlan_vendor_attr_dmg_rf_sector_cfg {
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7,
/* keep last */
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX =
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1
};
enum qca_wlan_vendor_attr_ll_stats_set {
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1,
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX =
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_ll_stats_clr {
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0,
/* Unsigned 32bit bitmap for clearing statistics
* All radio statistics 0x00000001
* cca_busy_time (within radio statistics) 0x00000002
* All channel stats (within radio statistics) 0x00000004
* All scan statistics (within radio statistics) 0x00000008
* All interface statistics 0x00000010
* All tx rate statistics (within interface statistics) 0x00000020
* All ac statistics (with in interface statistics) 0x00000040
* All contention (min, max, avg) statistics (within ac statisctics)
* 0x00000080.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1,
/* Unsigned 8 bit value: Request to stop statistics collection */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ = 2,
/* Unsigned 32 bit bitmap: Response from the driver
* for the cleared statistics
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK = 3,
/* Unsigned 8 bit value: Response from driver/firmware
* for the stop request
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP = 4,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX =
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_ll_stats_get {
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0,
/* Unsigned 32 bit value provided by the caller issuing the GET stats
* command. When reporting the stats results, the driver uses the same
* value to indicate which GET request the results correspond to.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1,
/* Unsigned 32 bit value - bit mask to identify what statistics are
* requested for retrieval.
* Radio Statistics 0x00000001
* Interface Statistics 0x00000020
* All Peer Statistics 0x00000040
* Peer Statistics 0x00000080
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX =
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_ll_stats_results {
QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0,
/* Unsigned 32bit value. Used by the driver; must match the request id
* provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5,
/* Signed 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6,
/* Signed 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7,
/* Signed 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are
* nested within the interface stats.
*/
/* Interface mode, e.g., STA, SOFTAP, IBSS, etc.
* Type = enum wifi_interface_mode.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9,
/* Interface MAC address. An array of 6 Unsigned int8 */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10,
/* Type = enum wifi_connection_state, e.g., DISCONNECTED,
* AUTHENTICATING, etc. valid for STA, CLI only.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11,
/* Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12,
/* Unsigned 32 bit value. WIFI_CAPABILITY_XXX */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13,
/* NULL terminated SSID. An array of 33 Unsigned 8bit values */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14,
/* BSSID. An array of 6 unsigned 8 bit values */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15,
/* Country string advertised by AP. An array of 3 unsigned 8 bit
* values.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16,
/* Country string for this association. An array of 3 unsigned 8 bit
* values.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could
* be nested within the interface stats.
*/
/* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26,
/* Unsigned int 32 value corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27,
/* Unsigned int 32 values corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28,
/* Unsigned int 32 values corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29,
/* Unsigned int 32 values corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30,
/* Unsigned int 32 values corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31,
/* Unsigned int 32 values corresponding to respective AC */
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32,
/* Unsigned 32 bit value. Number of peers */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are
* nested within the interface stats.
*/
/* Type = enum wifi_peer_type. Peer type, e.g., STA, AP, P2P GO etc. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34,
/* MAC addr corresponding to respective peer. An array of 6 unsigned
* 8 bit values.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35,
/* Unsigned int 32 bit value representing capabilities corresponding
* to respective peer.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36,
/* Unsigned 32 bit value. Number of rates */
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_*
* are nested within the rate stat.
*/
/* Wi-Fi Rate - separate attributes defined for individual fields */
/* Unsigned int 8 bit value; 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38,
/* Unsigned int 8 bit value; 0:1x1, 1:2x2, 3:3x3, 4:4x4 */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39,
/* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40,
/* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std
* in the units of 0.5 Mbps HT/VHT it would be MCS index
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41,
/* Unsigned 32 bit value. Bit rate in units of 100 kbps */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be
* nested within the peer info stats.
*/
/* Unsigned int 32 bit value. Number of successfully transmitted data
* packets, i.e., with ACK received corresponding to the respective
* rate.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43,
/* Unsigned int 32 bit value. Number of received data packets
* corresponding to the respective rate.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44,
/* Unsigned int 32 bit value. Number of data packet losses, i.e., no ACK
* received corresponding to the respective rate.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45,
/* Unsigned int 32 bit value. Total number of data packet retries for
* the respective rate.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46,
/* Unsigned int 32 bit value. Total number of short data packet retries
* for the respective rate.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47,
/* Unsigned int 32 bit value. Total number of long data packet retries
* for the respective rate.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48,
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49,
/* Unsigned 32 bit value. Total number of msecs the radio is awake
* accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50,
/* Unsigned 32 bit value. Total number of msecs the radio is
* transmitting accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51,
/* Unsigned 32 bit value. Total number of msecs the radio is in active
* receive accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52,
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
* to all scan accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53,
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
* to NAN accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54,
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
* to GSCAN accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55,
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
* to roam scan accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56,
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
* to PNO scan accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57,
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
* to Hotspot 2.0 scans and GAS exchange accruing over time.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58,
/* Unsigned 32 bit value. Number of channels. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could
* be nested within the channel stats.
*/
/* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60,
/* Unsigned 32 bit value. Primary 20 MHz channel. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61,
/* Unsigned 32 bit value. Center frequency (MHz) first segment. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62,
/* Unsigned 32 bit value. Center frequency (MHz) second segment. */
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63,
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_* could be
* nested within the radio stats.
*/
/* Unsigned int 32 bit value representing total number of msecs the
* radio is awake on that channel accruing over time, corresponding to
* the respective channel.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64,
/* Unsigned int 32 bit value representing total number of msecs the CCA
* register is busy accruing over time corresponding to the respective
* channel.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65,
QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66,
/* Signifies the nested list of channel attributes
* QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_*
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67,
/* Signifies the nested list of peer info attributes
* QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68,
/* Signifies the nested list of rate info attributes
* QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_*
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69,
/* Signifies the nested list of wmm info attributes
* QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_*
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70,
/* Unsigned 8 bit value. Used by the driver; if set to 1, it indicates
* that more stats, e.g., peers or radio, are to follow in the next
* QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event.
* Otherwise, it is set to 0.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71,
/* Unsigned 64 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77,
/* Number of msecs the radio spent in transmitting for each power level
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81,
/* Unsigned 32 bit value */
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82,
/* Unsigned int 32 value.
* Pending MSDUs corresponding to respective AC.
*/
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU = 83,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_ll_stats_type {
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3,
/* keep last */
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST,
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX =
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_tdls_configuration - Attributes for
* TDLS configuration to the host driver.
*
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger
* mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode
* represents the different TDLS trigger modes.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within
* which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number
* of packets shall meet the criteria for implicit TDLS setup.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx packets
* within a duration QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD
* to initiate a TDLS setup.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to initiate
* a TDLS Discovery to the peer.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of
* discovery attempts to know the TDLS capability of the peer. A peer is
* marked as TDLS not capable if there is no response for all the attempts.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32)
* within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD
* number of TX / RX frames meet the criteria for TDLS teardown.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number (u32)
* of Tx/Rx packets within a duration
* QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold
* corresponding to the RSSI of the peer below which a TDLS setup is
* triggered.
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold
* corresponding to the RSSI of the peer above which a TDLS teardown is
* triggered.
*/
enum qca_wlan_vendor_attr_tdls_configuration {
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1,
/* Attributes configuring the TDLS Implicit Trigger */
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in
* the driver
*
* The following are the different values for
* QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE.
*
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to initiate/teardown
* the TDLS connection to a respective peer comes from the user space.
* wpa_supplicant provides the commands TDLS_SETUP, TDLS_TEARDOWN,
* TDLS_DISCOVER to do this.
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS
* setup/teardown to the eligible peer once the configured criteria
* (such as TX/RX threshold, RSSI) is met. The attributes
* in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to
* the different configuration criteria for the TDLS trigger from the
* host driver.
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger
* the TDLS setup / teardown through the implicit mode only to the
* configured MAC addresses (wpa_supplicant, with tdls_external_control=1,
* configures the MAC address through TDLS_SETUP / TDLS_TEARDOWN commands).
* External mode works on top of the implicit mode. Thus the host driver
* is expected to configure in TDLS Implicit mode too to operate in
* External mode.
* Configuring External mode alone without Implicit mode is invalid.
*
* All the above implementations work as expected only when the host driver
* advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - representing
* that the TDLS message exchange is not internal to the host driver, but
* depends on wpa_supplicant to do the message exchange.
*/
enum qca_wlan_vendor_tdls_trigger_mode {
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0,
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1,
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2,
};
/**
* enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0
* that is hard-coded in the Board Data File (BDF).
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1
* that is hard-coded in the Board Data File (BDF).
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2
* that is hard-coded in the Board Data File (BDF).
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3
* that is hard-coded in the Board Data File (BDF).
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4
* that is hard-coded in the Board Data File (BDF).
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any
* source of SAR power limits, thereby disabling the SAR power
* limit feature.
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power
* limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR.
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0: Select the SAR power
* limits version 2.0 configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR.
*
* This enumerates the valid set of values that may be supplied for
* attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of
* the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command or in
* the response to an instance of the
* %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command.
*/
enum qca_vendor_attr_sar_limits_selections {
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0 = 7,
};
/**
* enum qca_vendor_attr_sar_limits_spec_modulations -
* SAR limits specification modulation
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK -
* CCK modulation
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM -
* OFDM modulation
*
* This enumerates the valid set of values that may be supplied for
* attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an
* instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an
* instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor
* command or in the response to an instance of the
* %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command.
*/
enum qca_vendor_attr_sar_limits_spec_modulations {
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1,
};
/**
* enum qca_vendor_attr_sar_limits - Attributes for SAR power limits
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE: Optional (u32) value to
* select which SAR power limit table should be used. Valid
* values are enumerated in enum
* %qca_vendor_attr_sar_limits_selections. The existing SAR
* power limit selection is unchanged if this attribute is not
* present.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value
* which specifies the number of SAR power limit specifications
* which will follow.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power
* limit specifications. The number of specifications is
* specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each
* specification contains a set of
* QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A
* specification is uniquely identified by the attributes
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND,
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always
* contains as a payload the attribute
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT,
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX.
* Either %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT or
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX is
* needed based upon the value of
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to
* indicate for which band this specification applies. Valid
* values are enumerated in enum %nl80211_band (although not all
* bands may be supported by a given device). If the attribute is
* not supplied then the specification will be applied to all
* supported bands.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value
* to indicate for which antenna chain this specification
* applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the
* attribute is not supplied then the specification will be
* applied to all chains.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32)
* value to indicate for which modulation scheme this
* specification applies. Valid values are enumerated in enum
* %qca_vendor_attr_sar_limits_spec_modulations. If the attribute
* is not supplied then the specification will be applied to all
* modulation schemes.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32)
* value to specify the actual power limit value in units of 0.5
* dBm (i.e., a value of 11 represents 5.5 dBm).
* This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER.
*
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX: Required (u32)
* value to indicate SAR V2 indices (0 - 11) to select SAR V2 profiles.
* This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0.
*
* These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS
* and %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS.
*/
enum qca_vendor_attr_sar_limits {
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX = 8,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX =
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_get_wifi_info: Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO sub command.
*
* @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: In a request this attribute
* should be set to any U8 value to indicate that the driver version
* should be returned. When enabled in this manner, in a response this
* attribute will contain a string representation of the driver version.
*
* @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: In a request this attribute
* should be set to any U8 value to indicate that the firmware version
* should be returned. When enabled in this manner, in a response this
* attribute will contain a string representation of the firmware version.
*
* @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX: In a request this attribute
* should be set to any U32 value to indicate that the current radio
* index should be returned. When enabled in this manner, in a response
* this attribute will contain a U32 radio index value.
*
*/
enum qca_wlan_vendor_attr_get_wifi_info {
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1,
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2,
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX =
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1,
};
/*
* enum qca_wlan_vendor_attr_wifi_logger_start: Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START sub command.
*/
enum qca_wlan_vendor_attr_wifi_logger_start {
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1,
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2,
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_GET_MAX =
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_logger_results {
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0,
/* Unsigned 32-bit value; must match the request Id supplied by
* Wi-Fi HAL in the corresponding subcmd NL msg.
*/
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1,
/* Unsigned 32-bit value; used to indicate the size of memory
* dump to be allocated.
*/
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX =
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1,
};
/**
* enum qca_scan_freq_list_type: Frequency list types
*
* @QCA_PREFERRED_SCAN_FREQ_LIST: The driver shall use the scan frequency list
* specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as
* a preferred frequency list for roaming.
*
* @QCA_SPECIFIC_SCAN_FREQ_LIST: The driver shall use the frequency list
* specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as
* a specific frequency list for roaming.
*/
enum qca_scan_freq_list_type {
QCA_PREFERRED_SCAN_FREQ_LIST = 1,
QCA_SPECIFIC_SCAN_FREQ_LIST = 2,
};
/**
* enum qca_vendor_attr_scan_freq_list_scheme: Frequency list scheme
*
* @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST: Nested attribute of u32 values
* List of frequencies in MHz to be considered for a roam scan.
*
* @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE: Unsigned 32-bit value.
* Type of frequency list scheme being configured/gotten as defined by the
* enum qca_scan_freq_list_type.
*/
enum qca_vendor_attr_scan_freq_list_scheme {
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST = 1,
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE = 2,
/* keep last */
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST,
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_MAX =
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST - 1,
};
/*
* enum qca_vendor_roam_triggers: Bitmap of roaming triggers
*
* @QCA_ROAM_TRIGGER_REASON_PER: Set if the roam has to be triggered based on
* a bad packet error rates (PER).
* @QCA_ROAM_TRIGGER_REASON_BEACON_MISS: Set if the roam has to be triggered
* based on beacon misses from the connected AP.
* @QCA_ROAM_TRIGGER_REASON_POOR_RSSI: Set if the roam has to be triggered
* due to poor RSSI of the connected AP.
* @QCA_ROAM_TRIGGER_REASON_BETTER_RSSI: Set if the roam has to be triggered
* upon finding a BSSID with a better RSSI than the connected BSSID.
* Here the RSSI of the current BSSID need not be poor.
* @QCA_ROAM_TRIGGER_REASON_PERIODIC: Set if the roam has to be triggered
* by triggering a periodic scan to find a better AP to roam.
* @QCA_ROAM_TRIGGER_REASON_DENSE: Set if the roam has to be triggered
* when the connected channel environment is too noisy/congested.
* @QCA_ROAM_TRIGGER_REASON_BTM: Set if the roam has to be triggered
* when BTM Request frame is received from the connected AP.
* @QCA_ROAM_TRIGGER_REASON_BSS_LOAD: Set if the roam has to be triggered
* when the channel utilization is goes above the configured threshold.
*
* Set the corresponding roam trigger reason bit to consider it for roam
* trigger.
* Userspace can set multiple bits and send to the driver. The driver shall
* consider all of them to trigger/initiate a roam scan.
*/
enum qca_vendor_roam_triggers {
QCA_ROAM_TRIGGER_REASON_PER = 1 << 0,
QCA_ROAM_TRIGGER_REASON_BEACON_MISS = 1 << 1,
QCA_ROAM_TRIGGER_REASON_POOR_RSSI = 1 << 2,
QCA_ROAM_TRIGGER_REASON_BETTER_RSSI = 1 << 3,
QCA_ROAM_TRIGGER_REASON_PERIODIC = 1 << 4,
QCA_ROAM_TRIGGER_REASON_DENSE = 1 << 5,
QCA_ROAM_TRIGGER_REASON_BTM = 1 << 6,
QCA_ROAM_TRIGGER_REASON_BSS_LOAD = 1 << 7,
};
/**
* enum qca_vendor_attr_roam_candidate_selection_criteria:
*
* Each attribute carries a weightage in percentage (%).
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI: Unsigned 8-bit value.
* Represents the weightage to be given for the RSSI selection
* criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE: Unsigned 8-bit value.
* Represents the weightage to be given for the rate selection
* criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW: Unsigned 8-bit value.
* Represents the weightage to be given for the band width selection
* criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND: Unsigned 8-bit value.
* Represents the weightage to be given for the band selection
* criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS: Unsigned 8-bit value.
* Represents the weightage to be given for the NSS selection
* criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION: Unsigned 8-bit value.
* Represents the weightage to be given for the channel congestion
* selection criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING: Unsigned 8-bit value.
* Represents the weightage to be given for the beamforming selection
* criteria among other parameters.
*
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN: Unsigned 8-bit value.
* Represents the weightage to be given for the OCE selection
* criteria among other parameters.
*/
enum qca_vendor_attr_roam_candidate_selection_criteria {
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI = 1,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE = 2,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW = 3,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND = 4,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS = 5,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION = 6,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING = 7,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN = 8,
/* keep last */
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST,
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_MAX =
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST - 1,
};
/**
* enum qca_vendor_attr_roam_control - Attributes to carry roam configuration
* The following attributes are used to set/get/clear the respective
* configurations to/from the driver.
* For the get, the attribute for the configuration to be queried shall
* carry any of its acceptable values to the driver. In return, the driver
* shall send the configured values within the same attribute to the user
* space.
*
* @QCA_ATTR_ROAM_CONTROL_ENABLE: Unsigned 8-bit value.
* Signifies to enable/disable roam control in driver.
* 1-enable, 0-disable
* Enable: Mandates the driver to do the further roams using the
* configuration parameters set through
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET.
* Disable: Disables the driver/firmware roaming triggered through
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET. Further roaming is
* expected to continue with the default configurations.
*
* @QCA_ATTR_ROAM_CONTROL_STATUS: Unsigned 8-bit value.
* This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET.
* Roam control status is obtained through this attribute.
*
* @QCA_ATTR_ROAM_CONTROL_CLEAR_ALL: Flag attribute to indicate the
* complete config set through QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET
* is to be cleared in the driver.
* This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR
* and shall be ignored if used with other sub commands.
* If this attribute is specified along with subcmd
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR, the driver shall ignore
* all other attributes, if there are any.
* If this attribute is not specified when the subcmd
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR is sent, the driver shall
* clear the data corresponding to the attributes specified.
*
* @QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME: Nested attribute to carry the
* list of frequencies and its type, represented by
* enum qca_vendor_attr_scan_freq_list_scheme.
* Frequency list and its type are mandatory for this attribute to set
* the frequencies.
* Frequency type is mandatory for this attribute to get the frequencies
* and the frequency list is obtained through
* QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST.
* Frequency list type is mandatory for this attribute to clear the
* frequencies.
*
* @QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD: Unsigned 32-bit value.
* Carries the value of scan period in seconds to set.
* The value of scan period is obtained with the same attribute for get.
* Clears the scan period in the driver when specified with clear command.
* Scan period is the idle time in seconds between each subsequent
* channel scans.
*
* @QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD: Unsigned 32-bit value.
* Carries the value of full scan period in seconds to set.
* The value of full scan period is obtained with the same attribute for
* get.
* Clears the full scan period in the driver when specified with clear
* command. Full scan period is the idle period in seconds between two
* successive full channel roam scans.
*
* @QCA_ATTR_ROAM_CONTROL_TRIGGERS: Unsigned 32-bit value.
* Carries a bitmap of the roam triggers specified in
* enum qca_vendor_roam_triggers.
* The driver shall enable roaming by enabling corresponding roam triggers
* based on the trigger bits sent with this attribute.
* If this attribute is not configured, the driver shall proceed with
* default behavior.
* The bitmap configured is obtained with the same attribute for get.
* Clears the bitmap configured in driver when specified with clear
* command.
*
* @QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA: Nested attribute signifying the
* weightage in percentage (%) to be given for each selection criteria.
* Different roam candidate selection criteria are represented by
* enum qca_vendor_attr_roam_candidate_selection_criteria.
* The driver shall select the roam candidate based on corresponding
* candidate selection scores sent.
*
* An empty nested attribute is used to indicate that no specific
* preference score/criteria is configured (i.e., to disable this mechanism
* in the set case and to show that the mechanism is disabled in the get
* case).
*
* Userspace can send multiple attributes out of this enum to the driver.
* Since this attribute represents the weight/percentage of preference for
* the respective selection criteria, it is preferred to configure 100%
* total weightage. The value in each attribute or cumulative weight of the
* values in all the nested attributes should not exceed 100%. The driver
* shall reject such configuration.
*
* If the weights configured through this attribute are less than 100%,
* the driver shall honor the weights (x%) passed for the corresponding
* selection criteria and choose/distribute rest of the weight (100-x)%
* for the other selection criteria, based on its internal logic.
*
* The selection criteria configured is obtained with the same
* attribute for get.
*
* Clears the selection criteria configured in the driver when specified
* with clear command.
*/
enum qca_vendor_attr_roam_control {
QCA_ATTR_ROAM_CONTROL_ENABLE = 1,
QCA_ATTR_ROAM_CONTROL_STATUS = 2,
QCA_ATTR_ROAM_CONTROL_CLEAR_ALL = 3,
QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME= 4,
QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD = 5,
QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD = 6,
QCA_ATTR_ROAM_CONTROL_TRIGGERS = 7,
QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA = 8,
/* keep last */
QCA_ATTR_ROAM_CONTROL_AFTER_LAST,
QCA_ATTR_ROAM_CONTROL_MAX =
QCA_ATTR_ROAM_CONTROL_AFTER_LAST - 1,
};
/*
* enum qca_wlan_vendor_attr_roaming_config_params: Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_ROAM sub command.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: Unsigned 32-bit value.
* Represents the different roam sub commands referred by
* enum qca_wlan_vendor_roaming_subcmd.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Unsigned 32-bit value.
* Represents the Request ID for the specific set of commands.
* This also helps to map specific set of commands to the respective
* ID / client. e.g., helps to identify the user entity configuring the
* Blacklist BSSID and accordingly clear the respective ones with the
* matching ID.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: Unsigned
* 32-bit value.Represents the number of whitelist SSIDs configured.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: Nested attribute
* to carry the list of Whitelist SSIDs.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: SSID (binary attribute,
* 0..32 octets). Represents the white list SSID. Whitelist SSIDs
* represent the list of SSIDs to which the firmware/driver can consider
* to roam to.
*
* The following PARAM_A_BAND_XX attributes are applied to 5GHz BSSIDs when
* comparing with a 2.4GHz BSSID. They are not applied when comparing two
* 5GHz BSSIDs.The following attributes are set through the Roaming SUBCMD -
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD: Signed 32-bit
* value, RSSI threshold above which 5GHz RSSI is favored.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD: Signed 32-bit
* value, RSSI threshold below which 5GHz RSSI is penalized.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR: Unsigned 32-bit
* value, factor by which 5GHz RSSI is boosted.
* boost=(RSSI_measured-5GHz_boost_threshold)*5GHz_boost_factor
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR: Unsigned 32-bit
* value, factor by which 5GHz RSSI is penalized.
* penalty=(5GHz_penalty_threshold-RSSI_measured)*5GHz_penalty_factor
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST: Unsigned 32-bit
* value, maximum boost that can be applied to a 5GHz RSSI.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS: Unsigned 32-bit
* value, boost applied to current BSSID to ensure the currently
* associated BSSID is favored so as to prevent ping-pong situations.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER: Signed 32-bit
* value, RSSI below which "Alert" roam is enabled.
* "Alert" mode roaming - firmware is "urgently" hunting for another BSSID
* because the RSSI is low, or because many successive beacons have been
* lost or other bad link conditions.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: Unsigned 32-bit
* value. 1-Enable, 0-Disable. Represents "Lazy" mode, where
* firmware is hunting for a better BSSID or white listed SSID even though
* the RSSI of the link is good. The parameters enabling the roaming are
* configured through the PARAM_A_BAND_XX attrbutes.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS: Nested attribute,
* represents the BSSIDs preferred over others while evaluating them
* for the roaming.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID: Unsigned
* 32-bit value. Represents the number of preferred BSSIDs set.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID: 6-byte MAC
* address representing the BSSID to be preferred.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER: Signed
* 32-bit value, representing the modifier to be applied to the RSSI of
* the BSSID for the purpose of comparing it with other roam candidate.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: Nested attribute,
* represents the BSSIDs to get blacklisted for roaming.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: Unsigned
* 32-bit value, represents the number of blacklisted BSSIDs.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 6-byte MAC
* address representing the Blacklisted BSSID.
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT: Flag attribute,
* indicates this BSSID blacklist as a hint to the driver. The driver can
* select this BSSID in the worst case (when no other BSSIDs are better).
*
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL: Nested attribute to
* set/get/clear the roam control config as
* defined @enum qca_vendor_attr_roam_control.
*/
enum qca_wlan_vendor_attr_roaming_config_params {
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1,
QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2,
/* Attributes for wifi_set_ssid_white_list */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5,
/* Attributes for set_roam_params */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12,
/* Attribute for set_lazy_roam */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13,
/* Attribute for set_lazy_roam with preferences */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17,
/* Attribute for set_blacklist bssid params */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20,
/* Flag attribute indicates this BSSID blacklist as a hint */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT = 21,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL = 22,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX =
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1,
};
/*
* enum qca_wlan_vendor_roaming_subcmd: Referred by
* QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST: Sub command to
* configure the white list SSIDs. These are configured through
* the following attributes.
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS,
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST,
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS: Sub command to
* configure the Roam params. These parameters are evaluated on the GScan
* results. Refers the attributes PARAM_A_BAND_XX above to configure the
* params.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM: Sets the Lazy roam. Uses
* the attribute QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE
* to enable/disable Lazy roam.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS: Sets the BSSID
* preference. Contains the attribute
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS to set the BSSID
* preference.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID: Sets the Blacklist
* BSSIDs. Refers QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS to
* set the same.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET: Command to set the
* roam control config to the driver with the attribute
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET: Command to obtain the
* roam control config from driver with the attribute
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
* For the get, the attribute for the configuration to be queried shall
* carry any of its acceptable value to the driver. In return, the driver
* shall send the configured values within the same attribute to the user
* space.
*
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR: Command to clear the
* roam control config in the driver with the attribute
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
* The driver shall continue with its default roaming behavior when data
* corresponding to an attribute is cleared.
*/
enum qca_wlan_vendor_roaming_subcmd {
QCA_WLAN_VENDOR_ROAMING_SUBCMD_INVALID = 0,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST = 1,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM = 3,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS = 4,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PARAMS = 5,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID = 6,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET = 7,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET = 8,
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR = 9,
};
enum qca_wlan_vendor_attr_gscan_config_params {
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1,
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS sub command.
*/
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND
= 2,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS
= 3,
/* Attributes for input params used by
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_START sub command.
*/
/* Unsigned 32-bit value; channel frequency */
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CHANNEL = 4,
/* Unsigned 32-bit value; dwell time in ms. */
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_DWELL_TIME = 5,
/* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_PASSIVE = 6,
/* Unsigned 8-bit value; channel class */
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CLASS = 7,
/* Unsigned 8-bit value; bucket index, 0 based */
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_INDEX = 8,
/* Unsigned 8-bit value; band. */
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BAND = 9,
/* Unsigned 32-bit value; desired period, in ms. */
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_PERIOD = 10,
/* Unsigned 8-bit value; report events semantics. */
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_REPORT_EVENTS = 11,
/* Unsigned 32-bit value. Followed by a nested array of
* GSCAN_CHANNEL_SPEC_* attributes.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12,
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_* attributes.
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC = 13,
/* Unsigned 32-bit value; base timer period in ms. */
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14,
/* Unsigned 32-bit value; number of APs to store in each scan in the
* BSSID/RSSI history buffer (keep the highest RSSI APs).
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15,
/* Unsigned 8-bit value; in %, when scan buffer is this much full, wake
* up AP.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT
= 16,
/* Unsigned 8-bit value; number of scan bucket specs; followed by a
* nested array of_GSCAN_BUCKET_SPEC_* attributes and values. The size
* of the array is determined by NUM_BUCKETS.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17,
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_* attributes.
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC = 18,
/* Unsigned 8-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH
= 19,
/* Unsigned 32-bit value; maximum number of results to be returned. */
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX
= 20,
/* An array of 6 x unsigned 8-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_BSSID = 21,
/* Signed 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22,
/* Signed 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24,
/* Number of hotlist APs as unsigned 32-bit value, followed by a nested
* array of AP_THRESHOLD_PARAM attributes and values. The size of the
* array is determined by NUM_AP.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25,
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_* attributes.
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM = 26,
/* Unsigned 32-bit value; number of samples for averaging RSSI. */
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE
= 27,
/* Unsigned 32-bit value; number of samples to confirm AP loss. */
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE
= 28,
/* Unsigned 32-bit value; number of APs breaching threshold. */
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29,
/* Unsigned 32-bit value; number of APs. Followed by an array of
* AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30,
/* Unsigned 32-bit value; number of samples to confirm AP loss. */
QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE
= 31,
/* Unsigned 32-bit value. If max_period is non zero or different than
* period, then this bucket is an exponential backoff bucket.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_MAX_PERIOD = 32,
/* Unsigned 32-bit value. */
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BASE = 33,
/* Unsigned 32-bit value. For exponential back off bucket, number of
* scans to perform for a given period.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_STEP_COUNT = 34,
/* Unsigned 8-bit value; in number of scans, wake up AP after these
* many scans.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS
= 35,
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST sub command.
*/
/* Unsigned 3-2bit value; number of samples to confirm SSID loss. */
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE
= 36,
/* Number of hotlist SSIDs as unsigned 32-bit value, followed by a
* nested array of SSID_THRESHOLD_PARAM_* attributes and values. The
* size of the array is determined by NUM_SSID.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37,
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_*
* attributes.
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM = 38,
/* An array of 33 x unsigned 8-bit value; NULL terminated SSID */
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_SSID = 39,
/* Unsigned 8-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_BAND = 40,
/* Signed 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41,
/* Signed 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42,
/* Unsigned 32-bit value; a bitmask with additional gscan config flag.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_CONFIGURATION_FLAGS = 43,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_MAX =
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_gscan_results {
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_INVALID = 0,
/* Unsigned 32-bit value; must match the request Id supplied by
* Wi-Fi HAL in the corresponding subcmd NL msg.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_REQUEST_ID = 1,
/* Unsigned 32-bit value; used to indicate the status response from
* firmware/driver for the vendor sub-command.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_STATUS = 2,
/* GSCAN Valid Channels attributes */
/* Unsigned 32bit value; followed by a nested array of CHANNELS. */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_CHANNELS = 3,
/* An array of NUM_CHANNELS x unsigned 32-bit value integers
* representing channel numbers.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CHANNELS = 4,
/* GSCAN Capabilities attributes */
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN
= 7,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE
= 8,
/* Signed 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD
= 9,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS
= 11,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES
= 12,
/* GSCAN Attributes used with
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE sub-command.
*/
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13,
/* GSCAN attributes used with
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT sub-command.
*/
/* An array of NUM_RESULTS_AVAILABLE x
* QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_*
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST = 14,
/* Unsigned 64-bit value; age of sample at the time of retrieval */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15,
/* 33 x unsigned 8-bit value; NULL terminated SSID */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_SSID = 16,
/* An array of 6 x unsigned 8-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BSSID = 17,
/* Unsigned 32-bit value; channel frequency in MHz */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18,
/* Signed 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RSSI = 19,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT = 20,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21,
/* Unsigned 16-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22,
/* Unsigned 16-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23,
/* Unsigned 32-bit value; size of the IE DATA blob */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24,
/* An array of IE_LENGTH x unsigned 8-bit value; blob of all the
* information elements found in the beacon; this data should be a
* packed list of wifi_information_element objects, one after the
* other.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25,
/* Unsigned 8-bit value; set by driver to indicate more scan results are
* available.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26,
/* GSCAN attributes for
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT sub-command.
*/
/* Unsigned 8-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_TYPE = 27,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_STATUS = 28,
/* GSCAN attributes for
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND sub-command.
*/
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
* to indicate number of results.
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the
* list of results.
*/
/* GSCAN attributes for
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE sub-command.
*/
/* An array of 6 x unsigned 8-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL
= 30,
/* Unsigned 32-bit value. */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI
= 31,
/* A nested array of signed 32-bit RSSI values. Size of the array is
* determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST
= 32,
/* GSCAN attributes used with
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS sub-command.
*/
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
* to indicate number of gscan cached results returned.
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST to indicate
* the list of gscan cached results.
*/
/* An array of NUM_RESULTS_AVAILABLE x
* QCA_NL80211_VENDOR_ATTR_GSCAN_CACHED_RESULTS_*
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST = 33,
/* Unsigned 32-bit value; a unique identifier for the scan unit. */
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_SCAN_ID = 34,
/* Unsigned 32-bit value; a bitmask w/additional information about scan.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_FLAGS = 35,
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
* to indicate number of wifi scan results/bssids retrieved by the scan.
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the
* list of wifi scan results returned for each cached result block.
*/
/* GSCAN attributes for
* QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command.
*/
/* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE for
* number of results.
* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested
* list of wifi scan results returned for each
* wifi_passpoint_match_result block.
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE.
*/
/* GSCAN attributes for
* QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command.
*/
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES
= 36,
/* A nested array of
* QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_*
* attributes. Array size =
* *_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37,
/* Unsigned 32-bit value; network block id for the matched network */
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38,
/* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested
* list of wifi scan results returned for each
* wifi_passpoint_match_result block.
*/
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39,
/* An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values;
* ANQP data in the information_element format.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40,
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41,
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42,
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID
= 43,
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID
= 44,
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_BUCKETS_SCANNED = 45,
/* Unsigned 32-bit value; a GSCAN Capabilities attribute.
* This is used to limit the maximum number of BSSIDs while sending
* the vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM with subcmd
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID and attribute
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID.
*/
QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID = 46,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_MAX =
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST - 1,
};
enum qca_wlan_vendor_attr_pno_config_params {
QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0,
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command.
*/
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1,
/* Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_*
* attributes. Array size =
* QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM.
*/
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3,
/* An array of 256 x unsigned 8-bit value; NULL terminated UTF-8 encoded
* realm, 0 if unspecified.
*/
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4,
/* An array of 16 x unsigned 32-bit value; roaming consortium ids to
* match, 0 if unspecified.
*/
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5,
/* An array of 6 x unsigned 8-bit value; MCC/MNC combination, 0s if
* unspecified.
*/
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6,
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command.
*/
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7,
/* Array of nested
* QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_*
* attributes. Array size =
* QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS.
*/
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8,
/* An array of 33 x unsigned 8-bit value; NULL terminated SSID */
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9,
/* Signed 8-bit value; threshold for considering this SSID as found,
* required granularity for this threshold is 4 dBm to 8 dBm.
*/
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD
= 10,
/* Unsigned 8-bit value; WIFI_PNO_FLAG_XXX */
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11,
/* Unsigned 8-bit value; auth bit field for matching WPA IE */
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12,
/* Unsigned 8-bit to indicate ePNO type;
* It takes values from qca_wlan_epno_type
*/
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13,
/* Nested attribute to send the channel list */
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14,
/* Unsigned 32-bit value; indicates the interval between PNO scan
* cycles in msec.
*/
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15,
QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16,
QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17,
QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18,
QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19,
QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20,
QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21,
QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22,
/* Unsigned 32-bit value, representing the PNO Request ID */
QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID = 23,
/* keep last */
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_PNO_MAX =
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1,
};
/**
* qca_wlan_vendor_acs_select_reason: This represents the different reasons why
* the ACS has to be triggered. These values are used by
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON
*/
enum qca_wlan_vendor_acs_select_reason {
/* Represents the reason that the ACS triggered during the AP start */
QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT,
/* Represents the reason that DFS found with the current channel */
QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS,
/* Represents the reason that LTE co-exist in the current band. */
QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX,
/* Represents the reason that generic, uncategorized interference has
* been found in the current channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_GENERIC_INTERFERENCE,
/* Represents the reason that excessive 802.11 interference has been
* found in the current channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_80211_INTERFERENCE,
/* Represents the reason that generic Continuous Wave (CW) interference
* has been found in the current channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_CW_INTERFERENCE,
/* Represents the reason that Microwave Oven (MWO) interference has been
* found in the current channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_MWO_INTERFERENCE,
/* Represents the reason that generic Frequency-Hopping Spread Spectrum
* (FHSS) interference has been found in the current channel. This may
* include 802.11 waveforms.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_FHSS_INTERFERENCE,
/* Represents the reason that non-802.11 generic Frequency-Hopping
* Spread Spectrum (FHSS) interference has been found in the current
* channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_FHSS_INTERFERENCE,
/* Represents the reason that generic Wideband (WB) interference has
* been found in the current channel. This may include 802.11 waveforms.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_WB_INTERFERENCE,
/* Represents the reason that non-802.11 generic Wideband (WB)
* interference has been found in the current channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_WB_INTERFERENCE,
/* Represents the reason that Jammer interference has been found in the
* current channel.
*/
QCA_WLAN_VENDOR_ACS_SELECT_REASON_JAMMER_INTERFERENCE,
};
/**
* qca_wlan_vendor_attr_external_acs_policy: Attribute values for
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This represents the
* external ACS policies to select the channels w.r.t. the PCL weights.
* (QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL represents the channels and
* their PCL weights.)
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY: Mandatory to
* select a channel with non-zero PCL weight.
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED: Prefer a
* channel with non-zero PCL weight.
*
*/
enum qca_wlan_vendor_attr_external_acs_policy {
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY,
};
/**
* qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel.
* This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS.
*/
enum qca_wlan_vendor_channel_prop_flags {
/* Bits 0, 1, 2, and 3 are reserved */
/* Turbo channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4,
/* CCK channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5,
/* OFDM channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6,
/* 2.4 GHz spectrum channel. */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7,
/* 5 GHz spectrum channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8,
/* Only passive scan allowed */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9,
/* Dynamic CCK-OFDM channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10,
/* GFSK channel (FHSS PHY) */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11,
/* Radar found on channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12,
/* 11a static turbo channel only */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13,
/* Half rate channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14,
/* Quarter rate channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15,
/* HT 20 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16,
/* HT 40 with extension channel above */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17,
/* HT 40 with extension channel below */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18,
/* HT 40 intolerant */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19,
/* VHT 20 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20,
/* VHT 40 with extension channel above */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21,
/* VHT 40 with extension channel below */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22,
/* VHT 80 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23,
/* HT 40 intolerant mark bit for ACS use */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24,
/* Channel temporarily blocked due to noise */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25,
/* VHT 160 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26,
/* VHT 80+80 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27,
/* HE 20 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE20 = 1 << 28,
/* HE 40 with extension channel above */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40PLUS = 1 << 29,
/* HE 40 with extension channel below */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40MINUS = 1 << 30,
/* HE 40 intolerant */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31,
};
/**
* qca_wlan_vendor_channel_prop_flags_2: This represents the flags for a
* channel, and is a continuation of qca_wlan_vendor_channel_prop_flags. This is
* used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2.
*/
enum qca_wlan_vendor_channel_prop_flags_2 {
/* HE 40 intolerant mark bit for ACS use */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOLMARK = 1 << 0,
/* HE 80 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80 = 1 << 1,
/* HE 160 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE160 = 1 << 2,
/* HE 80+80 channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80_80 = 1 << 3,
};
/**
* qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for
* each channel. This is used by
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT.
*/
enum qca_wlan_vendor_channel_prop_flags_ext {
/* Radar found on channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0,
/* DFS required on channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1,
/* DFS required on channel for 2nd band of 80+80 */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2,
/* If channel has been checked for DFS */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3,
/* Excluded in 802.11d */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4,
/* Channel Switch Announcement received on this channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5,
/* Ad-hoc is not allowed */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6,
/* Station only channel */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7,
/* DFS radar history for slave device (STA mode) */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8,
/* DFS CAC valid for slave device (STA mode) */
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9,
};
/**
* qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel
* information. These attributes are sent as part of
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following
* attributes correspond to a single channel.
*/
enum qca_wlan_vendor_external_acs_event_chan_info_attr {
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0,
/* A bitmask (u32) with flags specified in
* enum qca_wlan_vendor_channel_prop_flags.
*/
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1,
/* A bitmask (u32) with flags specified in
* enum qca_wlan_vendor_channel_prop_flags_ext.
*/
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2,
/* frequency in MHz (u32) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3,
/* maximum regulatory transmission power (u32) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4,
/* maximum transmission power (u32) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5,
/* minimum transmission power (u32) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6,
/* regulatory class id (u8) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7,
/* maximum antenna gain in (u8) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8,
/* VHT segment 0 (u8) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9,
/* VHT segment 1 (u8) */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10,
/* A bitmask (u32) with flags specified in
* enum qca_wlan_vendor_channel_prop_flags_2.
*/
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11,
/*
* VHT segment 0 in MHz (u32) and the attribute is mandatory.
* Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
* along with
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0.
*
* If both the driver and user-space application supports the 6 GHz
* band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0
* is deprecated and
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
* should be used.
*
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
* is still used if either of the driver or user space application
* doesn't support the 6 GHz band.
*/
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 = 12,
/*
* VHT segment 1 in MHz (u32) and the attribute is mandatory.
* Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
* along with
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1.
*
* If both the driver and user-space application supports the 6 GHz
* band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1
* is deprecated and
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
* should be considered.
*
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
* is still used if either of the driver or user space application
* doesn't support the 6 GHz band.
*/
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 = 13,
/* keep last */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1,
};
/**
* qca_wlan_vendor_attr_pcl: Represents attributes for
* preferred channel list (PCL). These attributes are sent as part of
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL and
* QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST.
*/
enum qca_wlan_vendor_attr_pcl {
QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0,
/* Channel number (u8) */
QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1,
/* Channel weightage (u8) */
QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2,
/* Channel frequency (u32) in MHz */
QCA_WLAN_VENDOR_ATTR_PCL_FREQ = 3,
/* Channel flags (u32)
* bit 0 set: channel to be used for GO role,
* bit 1 set: channel to be used on CLI role,
* bit 2 set: channel must be considered for operating channel
* selection & peer chosen operating channel should be
* one of the channels with this flag set,
* bit 3 set: channel should be excluded in GO negotiation
*/
QCA_WLAN_VENDOR_ATTR_PCL_FLAG = 4,
};
/**
* qca_wlan_vendor_attr_external_acs_event: Attribute to vendor sub-command
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This attribute will be sent by
* host driver.
*/
enum qca_wlan_vendor_attr_external_acs_event {
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0,
/* This reason (u8) refers to enum qca_wlan_vendor_acs_select_reason.
* This helps ACS module to understand why ACS needs to be started.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1,
/* Flag attribute to indicate if driver supports spectral scanning */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2,
/* Flag attribute to indicate if 11ac is offloaded to firmware */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3,
/* Flag attribute to indicate if driver provides additional channel
* capability as part of scan operation
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4,
/* Flag attribute to indicate interface status is UP */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5,
/* Operating mode (u8) of interface. Takes one of enum nl80211_iftype
* values.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6,
/* Channel width (u8). It takes one of enum nl80211_chan_width values.
* This is the upper bound of channel width. ACS logic should try to get
* a channel with the specified width and if not found, look for lower
* values.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7,
/* This (u8) will hold values of one of enum nl80211_bands */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8,
/* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode
* values
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9,
/* Array of (u32) supported frequency list among which ACS should choose
* best frequency.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10,
/* Preferred channel list by the driver which will have array of nested
* values as per enum qca_wlan_vendor_attr_pcl attribute.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11,
/* Array of nested attribute for each channel. It takes attr as defined
* in enum qca_wlan_vendor_external_acs_event_chan_info_attr.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12,
/* External ACS policy such as PCL mandatory, PCL preferred, etc.
* It uses values defined in enum
* qca_wlan_vendor_attr_external_acs_policy.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13,
/* Reference RF Operating Parameter (RROP) availability information
* (u16). It uses values defined in enum
* qca_wlan_vendor_attr_rropavail_info.
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14,
/* keep last */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX =
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels
* in priority order as decided after ACS operation in userspace.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: Required (u8).
* One of reason code from enum qca_wlan_vendor_acs_select_reason.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Required
* Array of nested values for each channel with following attributes:
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST is deprecated and use
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST
* is still used if either of the driver or user space application doesn't
* support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Required (u8).
* Primary channel number
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY is deprecated and use
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY
* is still used if either of the driver or user space application doesn't
* support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Required (u8).
* Secondary channel number, required only for 160 and 80+80 MHz bandwidths.
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY is deprecated and use
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY
* is still used if either of the driver or user space application
* doesn't support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: Required (u8).
* VHT seg0 channel number
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 is deprecated and use
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0
* is still used if either of the driver or user space application
* doesn't support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: Required (u8).
* VHT seg1 channel number
* Note: If both the driver and user-space application supports the 6 GHz band,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 is deprecated and use
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1.
* To maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1
* is still used if either of the driver or user space application
* doesn't support the 6 GHz band.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH: Required (u8).
* Takes one of enum nl80211_chan_width values.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST: Required
* Array of nested values for each channel with following attributes:
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY in MHz (u32),
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY in MHz (u32),
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 in MHz (u32),
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 in MHz (u32),
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
* Note: If user-space application has no support of the 6 GHz band, this
* attribute is optional.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY: Required (u32)
* Primary channel frequency in MHz
* Note: If user-space application has no support of the 6 GHz band, this
* attribute is optional.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY: Required (u32)
* Secondary channel frequency in MHz used for HT 40 MHz channels.
* Note: If user-space application has no support of the 6 GHz band, this
* attribute is optional.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0: Required (u32)
* VHT seg0 channel frequency in MHz
* Note: If user-space application has no support of the 6GHz band, this
* attribute is optional.
*
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1: Required (u32)
* VHT seg1 channel frequency in MHz
* Note: If user-space application has no support of the 6 GHz band, this
* attribute is optional.
*/
enum qca_wlan_vendor_attr_external_acs_channels {
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
/* One of reason code (u8) from enum qca_wlan_vendor_acs_select_reason
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1,
/* Array of nested values for each channel with following attributes:
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
*/
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2,
/* This (u8) will hold values of one of enum nl80211_bands */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3,
/* Primary channel (u8) */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4,
/* Secondary channel (u8) used for HT 40 MHz channels */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5,
/* VHT seg0 channel (u8) */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6,
/* VHT seg1 channel (u8) */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7,
/* Channel width (u8). Takes one of enum nl80211_chan_width values. */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST = 9,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY = 10,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY = 11,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 = 12,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 = 13,
/* keep last */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX =
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1
};
enum qca_chip_power_save_failure_reason {
/* Indicates if the reason for the failure is due to a protocol
* layer/module.
*/
QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0,
/* Indicates if the reason for the failure is due to a hardware issue.
*/
QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1,
};
/**
* qca_attr_chip_power_save_failure: Attributes to vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE. This carries the requisite
* information leading to the power save failure.
*/
enum qca_attr_chip_power_save_failure {
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0,
/* Reason to cause the power save failure.
* These reasons are represented by
* enum qca_chip_power_save_failure_reason.
*/
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1,
/* keep last */
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST,
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX =
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1,
};
/**
* qca_wlan_vendor_nud_stats_data_pkt_flags: Flag representing the various
* data types for which the stats have to get collected.
*/
enum qca_wlan_vendor_nud_stats_data_pkt_flags {
QCA_WLAN_VENDOR_NUD_STATS_DATA_ARP = 1 << 0,
QCA_WLAN_VENDOR_NUD_STATS_DATA_DNS = 1 << 1,
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_HANDSHAKE = 1 << 2,
QCA_WLAN_VENDOR_NUD_STATS_DATA_ICMPV4 = 1 << 3,
QCA_WLAN_VENDOR_NUD_STATS_DATA_ICMPV6 = 1 << 4,
/* Used by QCA_ATTR_NUD_STATS_PKT_TYPE only in nud stats get
* to represent the stats of respective data type.
*/
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_SYN = 1 << 5,
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_SYN_ACK = 1 << 6,
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_ACK = 1 << 7,
};
enum qca_wlan_vendor_nud_stats_set_data_pkt_info {
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_INVALID = 0,
/* Represents the data packet type to be monitored (u32).
* Host driver tracks the stats corresponding to each data frame
* represented by these flags.
* These data packets are represented by
* enum qca_wlan_vendor_nud_stats_data_pkt_flags
*/
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_TYPE = 1,
/* Name corresponding to the DNS frame for which the respective DNS
* stats have to get monitored (string). Max string length 255.
*/
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DNS_DOMAIN_NAME = 2,
/* source port on which the respective proto stats have to get
* collected (u32).
*/
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_SRC_PORT = 3,
/* destination port on which the respective proto stats have to get
* collected (u32).
*/
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_PORT = 4,
/* IPv4 address for which the destined data packets have to be
* monitored. (in network byte order), u32.
*/
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_IPV4 = 5,
/* IPv6 address for which the destined data packets have to be
* monitored. (in network byte order), 16 bytes array.
*/
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_IPV6 = 6,
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_LAST,
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_MAX =
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_LAST - 1,
};
/**
* qca_wlan_vendor_attr_nud_stats_set: Attributes to vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carries the requisite
* information to start/stop the NUD statistics collection.
*/
enum qca_attr_nud_stats_set {
QCA_ATTR_NUD_STATS_SET_INVALID = 0,
/* Flag to start/stop the NUD statistics collection.
* Start - If included, Stop - If not included
*/
QCA_ATTR_NUD_STATS_SET_START = 1,
/* IPv4 address of the default gateway (in network byte order), u32 */
QCA_ATTR_NUD_STATS_GW_IPV4 = 2,
/* Represents the list of data packet types to be monitored.
* Host driver tracks the stats corresponding to each data frame
* represented by these flags.
* These data packets are represented by
* enum qca_wlan_vendor_nud_stats_set_data_pkt_info
*/
QCA_ATTR_NUD_STATS_SET_DATA_PKT_INFO = 3,
/* keep last */
QCA_ATTR_NUD_STATS_SET_LAST,
QCA_ATTR_NUD_STATS_SET_MAX =
QCA_ATTR_NUD_STATS_SET_LAST - 1,
};
enum qca_attr_nud_data_stats {
QCA_ATTR_NUD_DATA_STATS_INVALID = 0,
/* Data packet type for which the stats are collected (u32).
* Represented by enum qca_wlan_vendor_nud_stats_data_pkt_flags
*/
QCA_ATTR_NUD_STATS_PKT_TYPE = 1,
/* Name corresponding to the DNS frame for which the respective DNS
* stats are monitored (string). Max string length 255.
*/
QCA_ATTR_NUD_STATS_PKT_DNS_DOMAIN_NAME = 2,
/* source port on which the respective proto stats are collected (u32).
*/
QCA_ATTR_NUD_STATS_PKT_SRC_PORT = 3,
/* destination port on which the respective proto stats are collected
* (u32).
*/
QCA_ATTR_NUD_STATS_PKT_DEST_PORT = 4,
/* IPv4 address for which the destined data packets have to be
* monitored. (in network byte order), u32.
*/
QCA_ATTR_NUD_STATS_PKT_DEST_IPV4 = 5,
/* IPv6 address for which the destined data packets have to be
* monitored. (in network byte order), 16 bytes array.
*/
QCA_ATTR_NUD_STATS_PKT_DEST_IPV6 = 6,
/* Data packet Request count received from netdev (u32). */
QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_FROM_NETDEV = 7,
/* Data packet Request count sent to lower MAC from upper MAC (u32). */
QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_TO_LOWER_MAC = 8,
/* Data packet Request count received by lower MAC from upper MAC
* (u32)
*/
QCA_ATTR_NUD_STATS_PKT_REQ_RX_COUNT_BY_LOWER_MAC = 9,
/* Data packet Request count successfully transmitted by the device
* (u32)
*/
QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_TX_SUCCESS = 10,
/* Data packet Response count received by lower MAC (u32) */
QCA_ATTR_NUD_STATS_PKT_RSP_RX_COUNT_BY_LOWER_MAC = 11,
/* Data packet Response count received by upper MAC (u32) */
QCA_ATTR_NUD_STATS_PKT_RSP_RX_COUNT_BY_UPPER_MAC = 12,
/* Data packet Response count delivered to netdev (u32) */
QCA_ATTR_NUD_STATS_PKT_RSP_COUNT_TO_NETDEV = 13,
/* Data Packet Response count that are dropped out of order (u32) */
QCA_ATTR_NUD_STATS_PKT_RSP_COUNT_OUT_OF_ORDER_DROP = 14,
/* keep last */
QCA_ATTR_NUD_DATA_STATS_LAST,
QCA_ATTR_NUD_DATA_STATS_MAX =
QCA_ATTR_NUD_DATA_STATS_LAST - 1,
};
/**
* qca_attr_nud_stats_get: Attributes to vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET. This carries the requisite
* NUD statistics collected when queried.
*/
enum qca_attr_nud_stats_get {
QCA_ATTR_NUD_STATS_GET_INVALID = 0,
/* ARP Request count from netdev (u32) */
QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_FROM_NETDEV = 1,
/* ARP Request count sent to lower MAC from upper MAC (u32) */
QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TO_LOWER_MAC = 2,
/* ARP Request count received by lower MAC from upper MAC (u32) */
QCA_ATTR_NUD_STATS_ARP_REQ_RX_COUNT_BY_LOWER_MAC = 3,
/* ARP Request count successfully transmitted by the device (u32) */
QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TX_SUCCESS = 4,
/* ARP Response count received by lower MAC (u32) */
QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_LOWER_MAC = 5,
/* ARP Response count received by upper MAC (u32) */
QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_UPPER_MAC = 6,
/* ARP Response count delivered to netdev (u32) */
QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_TO_NETDEV = 7,
/* ARP Response count dropped due to out of order reception (u32) */
QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_OUT_OF_ORDER_DROP = 8,
/* Flag indicating if the station's link to the AP is active.
* Active Link - If included, Inactive link - If not included
*/
QCA_ATTR_NUD_STATS_AP_LINK_ACTIVE = 9,
/* Flag indicating if there is any duplicate address detected (DAD).
* Yes - If detected, No - If not detected.
*/
QCA_ATTR_NUD_STATS_IS_DAD = 10,
/* List of Data packet types for which the stats are requested.
* This list does not carry ARP stats as they are done by the
* above attributes. Represented by enum qca_attr_nud_data_stats.
*/
QCA_ATTR_NUD_STATS_DATA_PKT_STATS = 11,
/* keep last */
QCA_ATTR_NUD_STATS_GET_LAST,
QCA_ATTR_NUD_STATS_GET_MAX =
QCA_ATTR_NUD_STATS_GET_LAST - 1,
};
enum qca_wlan_btm_candidate_status {
QCA_STATUS_ACCEPT = 0,
QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1,
QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2,
QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3,
QCA_STATUS_REJECT_LOW_RSSI = 4,
QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5,
QCA_STATUS_REJECT_UNKNOWN = 6,
};
enum qca_wlan_vendor_attr_btm_candidate_info {
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0,
/* 6-byte MAC address representing the BSSID of transition candidate */
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1,
/* Unsigned 32-bit value from enum qca_wlan_btm_candidate_status
* returned by the driver. It says whether the BSSID provided in
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by
* the driver, if not it specifies the reason for rejection.
* Note that the user-space can overwrite the transition reject reason
* codes provided by driver based on more information.
*/
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1,
};
enum qca_attr_trace_level {
QCA_ATTR_TRACE_LEVEL_INVALID = 0,
/*
* Nested array of the following attributes:
* QCA_ATTR_TRACE_LEVEL_MODULE,
* QCA_ATTR_TRACE_LEVEL_MASK.
*/
QCA_ATTR_TRACE_LEVEL_PARAM = 1,
/*
* Specific QCA host driver module. Please refer to the QCA host
* driver implementation to get the specific module ID.
*/
QCA_ATTR_TRACE_LEVEL_MODULE = 2,
/* Different trace level masks represented in the QCA host driver. */
QCA_ATTR_TRACE_LEVEL_MASK = 3,
/* keep last */
QCA_ATTR_TRACE_LEVEL_AFTER_LAST,
QCA_ATTR_TRACE_LEVEL_MAX =
QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_get_he_capabilities - IEEE 802.11ax HE capabilities
*/
enum qca_wlan_vendor_attr_get_he_capabilities {
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0,
/* Whether HE capabilities is supported
* (u8 attribute: 0 = not supported, 1 = supported)
*/
QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1,
/* HE PHY capabilities, array of 3 u32 values */
QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2,
/* HE MAC capabilities (u32 attribute) */
QCA_WLAN_VENDOR_ATTR_MAC_CAPAB = 3,
/* HE MCS map (u32 attribute) */
QCA_WLAN_VENDOR_ATTR_HE_MCS = 4,
/* Number of SS (u32 attribute) */
QCA_WLAN_VENDOR_ATTR_NUM_SS = 5,
/* RU count (u32 attribute) */
QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK = 6,
/* PPE threshold data, array of 8 u32 values */
QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD = 7,
/* keep last */
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX =
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_spectral_scan - Spectral scan config parameters
*/
enum qca_wlan_vendor_attr_spectral_scan {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INVALID = 0,
/* Number of times the chip enters spectral scan mode before
* deactivating spectral scans. When set to 0, chip will enter spectral
* scan mode continuously. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_COUNT = 1,
/* Spectral scan period. Period increment resolution is 256*Tclk,
* where Tclk = 1/44 MHz (Gmode), 1/40 MHz (Amode). u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_PERIOD = 2,
/* Spectral scan priority. u32 attribute. */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PRIORITY = 3,
/* Number of FFT data points to compute. u32 attribute. */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_SIZE = 4,
/* Enable targeted gain change before starting the spectral scan FFT.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_GC_ENA = 5,
/* Restart a queued spectral scan. u32 attribute. */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RESTART_ENA = 6,
/* Noise floor reference number for the calculation of bin power.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NOISE_FLOOR_REF = 7,
/* Disallow spectral scan triggers after TX/RX packets by setting
* this delay value to roughly SIFS time period or greater.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INIT_DELAY = 8,
/* Number of strong bins (inclusive) per sub-channel, below
* which a signal is declared a narrow band tone. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NB_TONE_THR = 9,
/* Specify the threshold over which a bin is declared strong (for
* scan bandwidth analysis). u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_STR_BIN_THR = 10,
/* Spectral scan report mode. u32 attribute. */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_WB_RPT_MODE = 11,
/* RSSI report mode, if the ADC RSSI is below
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR,
* then FFTs will not trigger, but timestamps and summaries get
* reported. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_RPT_MODE = 12,
/* ADC RSSI must be greater than or equal to this threshold (signed dB)
* to ensure spectral scan reporting with normal error code.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR = 13,
/* Format of frequency bin magnitude for spectral scan triggered FFTs:
* 0: linear magnitude, 1: log magnitude (20*log10(lin_mag)).
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PWR_FORMAT = 14,
/* Format of FFT report to software for spectral scan triggered FFTs.
* 0: No FFT report (only spectral scan summary report)
* 1: 2-dword summary of metrics for each completed FFT + spectral scan
* report
* 2: 2-dword summary of metrics for each completed FFT + 1x-oversampled
* bins (in-band) per FFT + spectral scan summary report
* 3: 2-dword summary of metrics for each completed FFT + 2x-oversampled
* bins (all) per FFT + spectral scan summary report
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RPT_MODE = 15,
/* Number of LSBs to shift out in order to scale the FFT bins.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BIN_SCALE = 16,
/* Set to 1 (with spectral_scan_pwr_format=1), to report bin magnitudes
* in dBm power. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DBM_ADJ = 17,
/* Per chain enable mask to select input ADC for search FFT.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_CHN_MASK = 18,
/* An unsigned 64-bit integer provided by host driver to identify the
* spectral scan request. This attribute is included in the scan
* response message for @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START
* and used as an attribute in
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP to identify the
* specific scan to be stopped.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19,
/* Skip interval for FFT reports. u32 attribute */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20,
/* Set to report only one set of FFT results.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21,
/* Debug level for spectral module in driver.
* 0 : Verbosity level 0
* 1 : Verbosity level 1
* 2 : Verbosity level 2
* 3 : Matched filterID display
* 4 : One time dump of FFT report
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22,
/* Type of spectral scan request. u32 attribute.
* It uses values defined in enum
* qca_wlan_vendor_attr_spectral_scan_request_type.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23,
/* This specifies the frequency span over which spectral
* scan would be carried out. Its value depends on the
* value of QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and
* the relation is as follows.
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL
* Not applicable. Spectral scan would happen in the
* operating span.
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE
* Center frequency (in MHz) of the span of interest or
* for convenience, center frequency (in MHz) of any channel
* in the span of interest. If agile spectral scan is initiated
* without setting a valid frequency it returns the error code
* (QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED).
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY = 24,
/* Spectral scan mode. u32 attribute.
* It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
* If this attribute is not present, it is assumed to be
* normal mode (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL).
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE = 25,
/* Spectral scan error code. u32 attribute.
* It uses values defined in enum
* qca_wlan_vendor_spectral_scan_error_code.
* This attribute is included only in failure scenarios.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE = 26,
/* 8-bit unsigned value to enable/disable debug of the
* Spectral DMA ring.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG = 27,
/* 8-bit unsigned value to enable/disable debug of the
* Spectral DMA buffers.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG = 28,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS.
*/
enum qca_wlan_vendor_attr_spectral_diag_stats {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0,
/* Number of spectral TLV signature mismatches.
* u64 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1,
/* Number of spectral phyerror events with insufficient length when
* parsing for secondary 80 search FFT report. u64 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2,
/* Number of spectral phyerror events without secondary 80
* search FFT report. u64 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3,
/* Number of spectral phyerror events with vht operation segment 1 id
* mismatches in search fft report. u64 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4,
/* Number of spectral phyerror events with vht operation segment 2 id
* mismatches in search fft report. u64 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX =
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO.
*/
enum qca_wlan_vendor_attr_spectral_cap {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0,
/* Flag attribute to indicate phydiag capability */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1,
/* Flag attribute to indicate radar detection capability */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2,
/* Flag attribute to indicate spectral capability */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3,
/* Flag attribute to indicate advanced spectral capability */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4,
/* Spectral hardware generation. u32 attribute.
* It uses values defined in enum
* qca_wlan_vendor_spectral_scan_cap_hw_gen.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN = 5,
/* Spectral bin scaling formula ID. u16 attribute.
* It uses values defined in enum
* qca_wlan_vendor_spectral_scan_cap_formula_id.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID = 6,
/* Spectral bin scaling param - low level offset.
* s16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_LOW_LEVEL_OFFSET = 7,
/* Spectral bin scaling param - high level offset.
* s16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HIGH_LEVEL_OFFSET = 8,
/* Spectral bin scaling param - RSSI threshold.
* s16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RSSI_THR = 9,
/* Spectral bin scaling param - default AGC max gain.
* u8 attribute.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_DEFAULT_AGC_MAX_GAIN = 10,
/* Flag attribute to indicate agile spectral scan capability
* for 20/40/80 MHz modes.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL = 11,
/* Flag attribute to indicate agile spectral scan capability
* for 160 MHz mode.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_160 = 12,
/* Flag attribute to indicate agile spectral scan capability
* for 80+80 MHz mode.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_80_80 = 13,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX =
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS.
*/
enum qca_wlan_vendor_attr_spectral_scan_status {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0,
/* Flag attribute to indicate whether spectral scan is enabled */
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1,
/* Flag attribute to indicate whether spectral scan is in progress*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2,
/* Spectral scan mode. u32 attribute.
* It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
* If this attribute is not present, normal mode
* (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL is assumed to be
* requested.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE = 3,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX =
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1,
};
/**
* qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the
* spectral scan request types.
* @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to
* set the spectral parameters and start scan.
* @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to
* only set the spectral parameters.
* @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to
* only start the spectral scan.
*/
enum qca_wlan_vendor_attr_spectral_scan_request_type {
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG,
};
/**
* qca_wlan_vendor_spectral_scan_mode: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START and
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. This represents the
* spectral scan modes.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL: Normal spectral scan:
* spectral scan in the current operating span.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE: Agile spectral scan:
* spectral scan in the configured agile span.
*/
enum qca_wlan_vendor_spectral_scan_mode {
QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL = 0,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE = 1,
};
/**
* qca_wlan_vendor_spectral_scan_error_code: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED: Changing the value
* of a parameter is not supported.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED: Requested spectral scan
* mode is not supported.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE: A parameter
* has invalid value.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED: A parameter
* is not initialized.
*/
enum qca_wlan_vendor_spectral_scan_error_code {
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED = 0,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED = 1,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE = 2,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED = 3,
};
/**
* qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the
* spectral hardware generation.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1: generation 1
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2: generation 2
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3: generation 3
*/
enum qca_wlan_vendor_spectral_scan_cap_hw_gen {
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1 = 0,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2 = 1,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3 = 2,
};
enum qca_wlan_vendor_tos {
QCA_WLAN_VENDOR_TOS_BK = 0,
QCA_WLAN_VENDOR_TOS_BE = 1,
QCA_WLAN_VENDOR_TOS_VI = 2,
QCA_WLAN_VENDOR_TOS_VO = 3,
};
/**
* enum qca_wlan_vendor_attr_active_tos - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS.
*/
enum qca_wlan_vendor_attr_active_tos {
QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_INVALID = 0,
/* Type Of Service - Represented by qca_wlan_vendor_tos */
QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS = 1,
/* Flag attribute representing the start (attribute included) or stop
* (attribute not included) of the respective TOS.
*/
QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_START = 2,
};
enum qca_wlan_vendor_hang_reason {
/* Unspecified reason */
QCA_WLAN_HANG_REASON_UNSPECIFIED = 0,
/* No Map for the MAC entry for the received frame */
QCA_WLAN_HANG_RX_HASH_NO_ENTRY_FOUND = 1,
/* Peer deletion timeout happened */
QCA_WLAN_HANG_PEER_DELETION_TIMEDOUT = 2,
/* Peer unmap timeout */
QCA_WLAN_HANG_PEER_UNMAP_TIMEDOUT = 3,
/* Scan request timed out */
QCA_WLAN_HANG_SCAN_REQ_EXPIRED = 4,
/* Consecutive Scan attempt failures */
QCA_WLAN_HANG_SCAN_ATTEMPT_FAILURES = 5,
/* Unable to get the message buffer */
QCA_WLAN_HANG_GET_MSG_BUFF_FAILURE = 6,
/* Current command processing is timedout */
QCA_WLAN_HANG_ACTIVE_LIST_TIMEOUT = 7,
/* Timeout for an ACK from FW for suspend request */
QCA_WLAN_HANG_SUSPEND_TIMEOUT = 8,
/* Timeout for an ACK from FW for resume request */
QCA_WLAN_HANG_RESUME_TIMEOUT = 9,
/* Transmission timeout for consecutive data frames */
QCA_WLAN_HANG_TRANSMISSIONS_TIMEOUT = 10,
/* Timeout for the TX completion status of data frame */
QCA_WLAN_HANG_TX_COMPLETE_TIMEOUT = 11,
/* DXE failure for TX/RX, DXE resource unavailability */
QCA_WLAN_HANG_DXE_FAILURE = 12,
/* WMI pending commands exceed the maximum count */
QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13,
/* Timeout for peer STA connection accept command's response from the
* FW in AP mode. This command is triggered when a STA (peer) connects
* to AP (DUT).
*/
QCA_WLAN_HANG_AP_STA_CONNECT_REQ_TIMEOUT = 14,
/* Timeout for the AP connection accept command's response from the FW
* in STA mode. This command is triggered when the STA (DUT) connects
* to an AP (peer).
*/
QCA_WLAN_HANG_STA_AP_CONNECT_REQ_TIMEOUT = 15,
/* Timeout waiting for the response to the MAC HW mode change command
* sent to FW as a part of MAC mode switch among DBS (Dual Band
* Simultaneous), SCC (Single Channel Concurrency), and MCC (Multi
* Channel Concurrency) mode.
*/
QCA_WLAN_HANG_MAC_HW_MODE_CHANGE_TIMEOUT = 16,
/* Timeout waiting for the response from FW to configure the MAC HW's
* mode. This operation is to configure the single/two MACs in either
* SCC/MCC/DBS mode.
*/
QCA_WLAN_HANG_MAC_HW_MODE_CONFIG_TIMEOUT = 17,
/* Timeout waiting for response of VDEV start command from the FW */
QCA_WLAN_HANG_VDEV_START_RESPONSE_TIMED_OUT = 18,
/* Timeout waiting for response of VDEV restart command from the FW */
QCA_WLAN_HANG_VDEV_RESTART_RESPONSE_TIMED_OUT = 19,
/* Timeout waiting for response of VDEV stop command from the FW */
QCA_WLAN_HANG_VDEV_STOP_RESPONSE_TIMED_OUT = 20,
/* Timeout waiting for response of VDEV delete command from the FW */
QCA_WLAN_HANG_VDEV_DELETE_RESPONSE_TIMED_OUT = 21,
/* Timeout waiting for response of peer all delete request command to
* the FW on a specific VDEV.
*/
QCA_WLAN_HANG_VDEV_PEER_DELETE_ALL_RESPONSE_TIMED_OUT = 22,
};
/**
* enum qca_wlan_vendor_attr_hang - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_HANG.
*/
enum qca_wlan_vendor_attr_hang {
QCA_WLAN_VENDOR_ATTR_HANG_INVALID = 0,
/* Reason for the hang - u32 attribute with a value from enum
* qca_wlan_vendor_hang_reason.
*/
QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1,
/* The binary blob data associated with the hang reason specified by
* QCA_WLAN_VENDOR_ATTR_HANG_REASON. This binary data is expected to
* contain the required dump to analyze the reason for the hang.
* NLA_BINARY attribute, the max size is 1024 bytes.
*/
QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA = 2,
QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_HANG_MAX =
QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_flush_pending - Attributes for
* flushing pending traffic in firmware.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_ADDR: Configure peer MAC address.
* @QCA_WLAN_VENDOR_ATTR_AC: Configure access category of the pending
* packets. It is u8 value with bit 0~3 represent AC_BE, AC_BK,
* AC_VI, AC_VO respectively. Set the corresponding bit to 1 to
* flush packets with access category.
*/
enum qca_wlan_vendor_attr_flush_pending {
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_PEER_ADDR = 1,
QCA_WLAN_VENDOR_ATTR_AC = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_MAX =
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST - 1,
};
/**
* qca_wlan_vendor_spectral_scan_cap_formula_id: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID in the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the
* Spectral bin scaling formula ID.
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING: No scaling
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED: AGC gain
* and RSSI threshold based formula.
*/
enum qca_wlan_vendor_spectral_scan_cap_formula_id {
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING = 0,
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED = 1,
};
/**
* enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative
* RF Operating Parameter (RROP) information is available, and if so, at which
* point in the application-driver interaction sequence it can be retrieved by
* the application from the driver. This point may vary by architecture and
* other factors. This is a u16 value.
*/
enum qca_wlan_vendor_attr_rropavail_info {
/* RROP information is unavailable. */
QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE,
/* RROP information is available and the application can retrieve the
* information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS
* event from the driver.
*/
QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START,
/* RROP information is available only after a vendor specific scan
* (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has
* successfully completed. The application can retrieve the information
* after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from
* the driver.
*/
QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END,
};
/**
* enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific
* Representative RF Operating Parameter (RROP) information. It is sent for the
* vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is
* intended for use by external Auto Channel Selection applications. It provides
* guidance values for some RF parameters that are used by the system during
* operation. These values could vary by channel, band, radio, and so on.
*/
enum qca_wlan_vendor_attr_rrop_info {
QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0,
/* Representative Tx Power List (RTPL) which has an array of nested
* values as per attributes in enum qca_wlan_vendor_attr_rtplinst.
*/
QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1,
QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list
* entry instances in the Representative Tx Power List (RTPL). It provides
* simplified power values intended for helping external Auto channel Selection
* applications compare potential Tx power performance between channels, other
* operating conditions remaining identical. These values are not necessarily
* the actual Tx power values that will be used by the system. They are also not
* necessarily the max or average values that will be used. Instead, they are
* relative, summarized keys for algorithmic use computed by the driver or
* underlying firmware considering a number of vendor specific factors.
*/
enum qca_wlan_vendor_attr_rtplinst {
QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0,
/* Primary channel number (u8).
* Note: If both the driver and user space application support the
* 6 GHz band, this attribute is deprecated and
* QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY should be used. To
* maintain backward compatibility,
* QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if either the
* driver or user space application or both do not support the 6 GHz
* band.
*/
QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1,
/* Representative Tx power in dBm (s32) with emphasis on throughput. */
QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2,
/* Representative Tx power in dBm (s32) with emphasis on range. */
QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3,
/* Primary channel center frequency (u32) in MHz */
QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY = 4,
QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX =
QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_config_latency_level - Level for
* wlan latency module.
*
* There will be various of Wi-Fi functionality like scan/roaming/adaptive
* power saving which would causing data exchange out of service, this
* would be a big impact on latency. For latency sensitive applications over
* Wi-Fi are intolerant to such operations and thus would configure them
* to meet their respective needs. It is well understood by such applications
* that altering the default behavior would degrade the Wi-Fi functionality
* w.r.t the above pointed WLAN operations.
*
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL:
* Default WLAN operation level which throughput orientated.
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE:
* Use moderate level to improve latency by limit scan duration.
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW:
* Use low latency level to benifit application like concurrent
* downloading or video streaming via constraint scan/adaptive PS.
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW:
* Use ultra low latency level to benefit for gaming/voice
* application via constraint scan/roaming/adaptive PS.
*/
enum qca_wlan_vendor_attr_config_latency_level {
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL = 1,
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE = 2,
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW = 3,
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW = 4,
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MAX =
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_wlan_mac - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO.
*/
enum qca_wlan_vendor_attr_mac {
QCA_WLAN_VENDOR_ATTR_MAC_INVALID = 0,
/* MAC mode info list which has an array of nested values as
* per attributes in enum qca_wlan_vendor_attr_mac_mode_info.
*/
QCA_WLAN_VENDOR_ATTR_MAC_INFO = 1,
/* keep last */
QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_MAC_MAX =
QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_mac_iface_info - Information of the connected
* Wi-Fi netdev interface on a respective MAC.
* Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO.
*/
enum qca_wlan_vendor_attr_mac_iface_info {
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_INVALID = 0,
/* Wi-Fi netdev's interface index (u32) */
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_IFINDEX = 1,
/* Associated frequency in MHz of the connected Wi-Fi interface (u32) */
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_mac_info - Points to MAC the information.
* Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_INFO of the
* vendor command QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO.
*/
enum qca_wlan_vendor_attr_mac_info {
QCA_WLAN_VENDOR_ATTR_MAC_INFO_INVALID = 0,
/* Hardware MAC ID associated for the MAC (u32) */
QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID = 1,
/* Band supported by the MAC at a given point.
* This is a u32 bitmask of BIT(NL80211_BAND_*) as described in %enum
* nl80211_band.
*/
QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND = 2,
/* Refers to list of WLAN netdev interfaces associated with this MAC.
* Represented by enum qca_wlan_vendor_attr_mac_iface_info.
*/
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_get_logger_features - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET.
*/
enum qca_wlan_vendor_attr_get_logger_features {
QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID = 0,
/* Unsigned 32-bit enum value of wifi_logger_supported_features */
QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED = 1,
/* keep last */
QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_LOGGER_MAX =
QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - 1,
};
/**
* enum wifi_logger_supported_features - Values for supported logger features
*/
enum wifi_logger_supported_features {
WIFI_LOGGER_MEMORY_DUMP_FEATURE = (1 << (0)),
WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_FEATURE = (1 << (1)),
WIFI_LOGGER_CONNECT_EVENT_FEATURE = (1 << (2)),
WIFI_LOGGER_POWER_EVENT_FEATURE = (1 << (3)),
WIFI_LOGGER_WAKE_LOCK_FEATURE = (1 << (4)),
WIFI_LOGGER_VERBOSE_FEATURE = (1 << (5)),
WIFI_LOGGER_WATCHDOG_TIMER_FEATURE = (1 << (6)),
WIFI_LOGGER_DRIVER_DUMP_FEATURE = (1 << (7)),
WIFI_LOGGER_PACKET_FATE_FEATURE = (1 << (8)),
};
/**
* enum qca_wlan_tdls_caps_features_supported - Values for TDLS get
* capabilities features
*/
enum qca_wlan_tdls_caps_features_supported {
WIFI_TDLS_SUPPORT = (1 << (0)),
WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT = (1 << (1)),
WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2))
};
/**
* enum qca_wlan_vendor_attr_tdls_get_capabilities - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES.
*/
enum qca_wlan_vendor_attr_tdls_get_capabilities {
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0,
/* Indicates the max concurrent sessions */
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX_CONC_SESSIONS,
/* Indicates the support for features */
/* Unsigned 32-bit bitmap qca_wlan_tdls_caps_features_supported
*/
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_FEATURES_SUPPORTED,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX =
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST - 1,
};
/**
* enum qca_wlan_offloaded_packets_sending_control - Offload packets control
* command used as value for the attribute
* QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL.
*/
enum qca_wlan_offloaded_packets_sending_control {
QCA_WLAN_OFFLOADED_PACKETS_SENDING_CONTROL_INVALID = 0,
QCA_WLAN_OFFLOADED_PACKETS_SENDING_START,
QCA_WLAN_OFFLOADED_PACKETS_SENDING_STOP
};
/**
* enum qca_wlan_vendor_attr_offloaded_packets - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS.
*/
enum qca_wlan_vendor_attr_offloaded_packets {
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID = 0,
/* Takes valid value from the enum
* qca_wlan_offloaded_packets_sending_control
* Unsigned 32-bit value
*/
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID,
/* array of u8 len: Max packet size */
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA,
/* 6-byte MAC address used to represent source MAC address */
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR,
/* 6-byte MAC address used to represent destination MAC address */
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR,
/* Unsigned 32-bit value, in milli seconds */
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD,
/* This optional unsigned 16-bit attribute is used for specifying
* ethernet protocol type. If not specified ethertype defaults to IPv4.
*/
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_ETHER_PROTO_TYPE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX =
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST - 1,
};
/**
* enum qca_wlan_rssi_monitoring_control - RSSI control commands used as values
* by the attribute QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL.
*/
enum qca_wlan_rssi_monitoring_control {
QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID = 0,
QCA_WLAN_RSSI_MONITORING_START,
QCA_WLAN_RSSI_MONITORING_STOP,
};
/**
* enum qca_wlan_vendor_attr_rssi_monitoring - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI.
*/
enum qca_wlan_vendor_attr_rssi_monitoring {
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID = 0,
/* Takes valid value from the enum
* qca_wlan_rssi_monitoring_control
* Unsigned 32-bit value enum qca_wlan_rssi_monitoring_control
*/
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL,
/* Unsigned 32-bit value */
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_REQUEST_ID,
/* Signed 8-bit value in dBm */
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI,
/* Signed 8-bit value in dBm */
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI,
/* attributes to be used/received in callback */
/* 6-byte MAC address used to represent current BSSID MAC address */
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID,
/* Signed 8-bit value indicating the current RSSI */
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI,
/* keep last */
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX =
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_ndp_params - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_NDP.
*/
enum qca_wlan_vendor_attr_ndp_params {
QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID = 0,
/* Unsigned 32-bit value
* enum of sub commands values in qca_wlan_ndp_sub_cmd
*/
QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD,
/* Unsigned 16-bit value */
QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID,
/* NL attributes for data used NDP SUB cmds */
/* Unsigned 32-bit value indicating a service info */
QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID,
/* Unsigned 32-bit value; channel frequency in MHz */
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL,
/* Interface Discovery MAC address. An array of 6 Unsigned int8 */
QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR,
/* Interface name on which NDP is being created */
QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR,
/* Unsigned 32-bit value for security */
/* CONFIG_SECURITY is deprecated, use NCS_SK_TYPE/PMK/SCID instead */
QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY,
/* Unsigned 32-bit value for QoS */
QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS,
/* Array of u8: len = QCA_WLAN_VENDOR_ATTR_NAN_DP_APP_INFO_LEN */
QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO,
/* Unsigned 32-bit value for NDP instance Id */
QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID,
/* Array of instance Ids */
QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY,
/* Unsigned 32-bit value for initiator/responder NDP response code
* accept/reject
*/
QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE,
/* NDI MAC address. An array of 6 Unsigned int8 */
QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR,
/* Unsigned 32-bit value errors types returned by driver
* The wifi_nan.h in AOSP project platform/hardware/libhardware_legacy
* NanStatusType includes these values.
*/
QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE,
/* Unsigned 32-bit value error values returned by driver
* The nan_i.h in AOSP project platform/hardware/qcom/wlan
* NanInternalStatusType includes these values.
*/
QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE,
/* Unsigned 32-bit value for Channel setup configuration
* The wifi_nan.h in AOSP project platform/hardware/libhardware_legacy
* NanDataPathChannelCfg includes these values.
*/
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG,
/* Unsigned 32-bit value for Cipher Suite Shared Key Type */
QCA_WLAN_VENDOR_ATTR_NDP_CSID,
/* Array of u8: len = NAN_PMK_INFO_LEN 32 bytes */
QCA_WLAN_VENDOR_ATTR_NDP_PMK,
/* Security Context Identifier that contains the PMKID
* Array of u8: len = NAN_SCID_BUF_LEN 1024 bytes
*/
QCA_WLAN_VENDOR_ATTR_NDP_SCID,
/* Array of u8: len = NAN_SECURITY_MAX_PASSPHRASE_LEN 63 bytes */
QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE,
/* Array of u8: len = NAN_MAX_SERVICE_NAME_LEN 255 bytes */
QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME,
/* Unsigned 32-bit bitmap indicating schedule update
* BIT_0: NSS Update
* BIT_1: Channel list update
*/
QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON,
/* Unsigned 32-bit value for NSS */
QCA_WLAN_VENDOR_ATTR_NDP_NSS,
/* Unsigned 32-bit value for NUMBER NDP CHANNEL */
QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS,
/* Unsigned 32-bit value for CHANNEL BANDWIDTH
* 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz
*/
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH,
/* Array of channel/band width */
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO,
/* IPv6 address used by NDP (in network byte order), 16 bytes array.
* This attribute is used and optional for ndp request, ndp response,
* ndp indication, and ndp confirm.
*/
QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR = 27,
/* Unsigned 16-bit value indicating transport port used by NDP.
* This attribute is used and optional for ndp response, ndp indication,
* and ndp confirm.
*/
QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT = 28,
/* Unsigned 8-bit value indicating protocol used by NDP and assigned by
* the Internet Assigned Numbers Authority (IANA) as per:
* https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
* This attribute is used and optional for ndp response, ndp indication,
* and ndp confirm.
*/
QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29,
/* Unsigned 8-bit value indicating if NDP remote peer supports NAN NDPE.
* 1:support 0:not support
*/
QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT = 30,
/* keep last */
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX =
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST - 1,
};
enum qca_wlan_ndp_sub_cmd {
QCA_WLAN_VENDOR_ATTR_NDP_INVALID = 0,
/* Command to create a NAN data path interface */
QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE = 1,
/* Command to delete a NAN data path interface */
QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE = 2,
/* Command to initiate a NAN data path session */
QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST = 3,
/* Command to notify if the NAN data path session was sent */
QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE = 4,
/* Command to respond to NAN data path session */
QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST = 5,
/* Command to notify on the responder about the response */
QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE = 6,
/* Command to initiate a NAN data path end */
QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST = 7,
/* Command to notify the if end request was sent */
QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE = 8,
/* Command to notify the peer about the end request */
QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND = 9,
/* Command to confirm the NAN data path session is complete */
QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND = 10,
/* Command to indicate the peer about the end request being received */
QCA_WLAN_VENDOR_ATTR_NDP_END_IND = 11,
/* Command to indicate the peer of schedule update */
QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND = 12
};
/**
* enum qca_wlan_vendor_attr_nd_offload - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD.
*/
enum qca_wlan_vendor_attr_nd_offload {
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID = 0,
/* Flag to set Neighbour Discovery offload */
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG,
/* Keep last */
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX =
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - 1,
};
/**
* enum packet_filter_sub_cmd - Packet filter sub commands
*/
enum packet_filter_sub_cmd {
/**
* Write packet filter program and/or data. The driver/firmware should
* disable APF before writing into local buffer and re-enable APF after
* writing is done.
*/
QCA_WLAN_SET_PACKET_FILTER = 1,
/* Get packet filter feature capabilities from driver */
QCA_WLAN_GET_PACKET_FILTER = 2,
/**
* Write packet filter program and/or data. User space will send the
* %QCA_WLAN_DISABLE_PACKET_FILTER command before issuing this command
* and will send the %QCA_WLAN_ENABLE_PACKET_FILTER afterwards. The key
* difference from that %QCA_WLAN_SET_PACKET_FILTER is the control over
* enable/disable is given to user space with this command. Also,
* user space sends the length of program portion in the buffer within
* %QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH.
*/
QCA_WLAN_WRITE_PACKET_FILTER = 3,
/* Read packet filter program and/or data */
QCA_WLAN_READ_PACKET_FILTER = 4,
/* Enable APF feature */
QCA_WLAN_ENABLE_PACKET_FILTER = 5,
/* Disable APF feature */
QCA_WLAN_DISABLE_PACKET_FILTER = 6,
};
/**
* enum qca_wlan_vendor_attr_packet_filter - BPF control commands used by
* vendor QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER.
*/
enum qca_wlan_vendor_attr_packet_filter {
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID = 0,
/* Unsigned 32-bit enum passed using packet_filter_sub_cmd */
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SUB_CMD,
/* Unsigned 32-bit value indicating the packet filter version */
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION,
/* Unsigned 32-bit value indicating the packet filter id */
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_ID,
/**
* Unsigned 32-bit value indicating the packet filter size including
* program + data.
*/
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE,
/* Unsigned 32-bit value indicating the packet filter current offset */
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET,
/* Program and/or data in bytes */
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM,
/* Unsigned 32-bit value of the length of the program section in packet
* filter buffer.
*/
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH = 7,
/* keep last */
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_MAX =
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_drv_info - WLAN driver info used by vendor command
* QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE.
*/
enum qca_wlan_vendor_drv_info {
QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID = 0,
/* Maximum Message size info between firmware & HOST
* Unsigned 32-bit value
*/
QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_DRV_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_wake_stats - Wake lock stats used by vendor
* command QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS.
*/
enum qca_wlan_vendor_attr_wake_stats {
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_INVALID = 0,
/* Unsigned 32-bit value indicating the total count of wake event */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_CMD_EVENT_WAKE,
/* Array of individual wake count, each index representing wake reason
*/
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_CMD_EVENT_WAKE_CNT_PTR,
/* Unsigned 32-bit value representing wake count array */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_CMD_EVENT_WAKE_CNT_SZ,
/* Unsigned 32-bit total wake count value of driver/fw */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_DRIVER_FW_LOCAL_WAKE,
/* Array of wake stats of driver/fw */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_DRIVER_FW_LOCAL_WAKE_CNT_PTR,
/* Unsigned 32-bit total wake count value of driver/fw */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_DRIVER_FW_LOCAL_WAKE_CNT_SZ,
/* Unsigned 32-bit total wake count value of packets received */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_RX_DATA_WAKE,
/* Unsigned 32-bit wake count value unicast packets received */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_UNICAST_CNT,
/* Unsigned 32-bit wake count value multicast packets received */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_MULTICAST_CNT,
/* Unsigned 32-bit wake count value broadcast packets received */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_BROADCAST_CNT,
/* Unsigned 32-bit wake count value of ICMP packets */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP_PKT,
/* Unsigned 32-bit wake count value of ICMP6 packets */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_PKT,
/* Unsigned 32-bit value ICMP6 router advertisement */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_RA,
/* Unsigned 32-bit value ICMP6 neighbor advertisement */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_NA,
/* Unsigned 32-bit value ICMP6 neighbor solicitation */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_NS,
/* Unsigned 32-bit wake count value of receive side ICMP4 multicast */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP4_RX_MULTICAST_CNT,
/* Unsigned 32-bit wake count value of receive side ICMP6 multicast */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_RX_MULTICAST_CNT,
/* Unsigned 32-bit wake count value of receive side multicast */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_OTHER_RX_MULTICAST_CNT,
/* Unsigned 32-bit wake count value of a given RSSI breach */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RSSI_BREACH_CNT,
/* Unsigned 32-bit wake count value of low RSSI */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_LOW_RSSI_CNT,
/* Unsigned 32-bit value GSCAN count */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_GSCAN_CNT,
/* Unsigned 32-bit value PNO complete count */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_PNO_COMPLETE_CNT,
/* Unsigned 32-bit value PNO match count */
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_PNO_MATCH_CNT,
/* keep last */
QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST,
QCA_WLAN_VENDOR_GET_WAKE_STATS_MAX =
QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_thermal_level - Defines various thermal levels
* configured by userspace to the driver/firmware. The values will be
* encapsulated in QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL attribute.
* The driver/firmware takes actions requested by userspace such as throttling
* wifi TX etc. in order to mitigate high temperature.
*
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE: Stop/clear all throttling actions.
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT: Throttle TX lightly.
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE: Throttle TX moderately.
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE: Throttle TX severely.
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL: Critical thermal level reached.
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY: Emergency thermal level reached.
*/
enum qca_wlan_vendor_thermal_level {
QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE = 0,
QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT = 1,
QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE = 2,
QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE = 3,
QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL = 4,
QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY = 5,
};
/**
* enum qca_wlan_vendor_attr_thermal_cmd - Vendor subcmd attributes to set
* cmd value. Used for NL attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
*/
enum qca_wlan_vendor_attr_thermal_cmd {
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_INVALID = 0,
/* The value of command, driver will implement different operations
* according to this value. It uses values defined in
* enum qca_wlan_vendor_attr_thermal_cmd_type.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE = 1,
/* Userspace uses this attribute to configure thermal level to the
* driver/firmware. Used in request, u32 attribute, possible values
* are defined in enum qca_wlan_vendor_thermal_level.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL = 2,
/* Userspace uses this attribute to configure the time in which the
* driver/firmware should complete applying settings it received from
* userspace with QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL
* command type. Used in request, u32 attribute, value is in
* milliseconds. A value of zero indicates to apply the settings
* immediately. The driver/firmware can delay applying the configured
* thermal settings within the time specified in this attribute if
* there is any critical ongoing operation.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_MAX =
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST - 1
};
/**
* qca_wlan_vendor_attr_thermal_cmd_type: Attribute values for
* QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE to the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD. This represents the
* thermal command types sent to driver.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS: Request to
* get thermal shutdown configuration parameters for display. Parameters
* responded from driver are defined in
* enum qca_wlan_vendor_attr_get_thermal_params_rsp.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE: Request to
* get temperature. Host should respond with a temperature data. It is defined
* in enum qca_wlan_vendor_attr_thermal_get_temperature.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND: Request to execute thermal
* suspend action.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME: Request to execute thermal
* resume action.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL: Configure thermal level to
* the driver/firmware.
*/
enum qca_wlan_vendor_attr_thermal_cmd_type {
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL,
};
/**
* enum qca_wlan_vendor_attr_thermal_get_temperature - vendor subcmd attributes
* to get chip temperature by user.
* enum values are used for NL attributes for data used by
* QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE command for data used
* by QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
*/
enum qca_wlan_vendor_attr_thermal_get_temperature {
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_INVALID = 0,
/* Temperature value (degree Celsius) from driver.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_DATA,
/* keep last */
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_MAX =
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_get_thermal_params_rsp - vendor subcmd attributes
* to get configuration parameters of thermal shutdown feature. Enum values are
* used by QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS command for data
* used by QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
*/
enum qca_wlan_vendor_attr_get_thermal_params_rsp {
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_INVALID = 0,
/* Indicate if the thermal shutdown feature is enabled.
* NLA_FLAG attribute.
*/
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SHUTDOWN_EN,
/* Indicate if the auto mode is enabled.
* Enable: Driver triggers the suspend/resume action.
* Disable: User space triggers the suspend/resume action.
* NLA_FLAG attribute.
*/
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SHUTDOWN_AUTO_EN,
/* Thermal resume threshold (degree Celsius). Issue the resume command
* if the temperature value is lower than this threshold.
* u16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_RESUME_THRESH,
/* Thermal warning threshold (degree Celsius). FW reports temperature
* to driver if it's higher than this threshold.
* u16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_WARNING_THRESH,
/* Thermal suspend threshold (degree Celsius). Issue the suspend command
* if the temperature value is higher than this threshold.
* u16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SUSPEND_THRESH,
/* FW reports temperature data periodically at this interval (ms).
* u16 attribute.
*/
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SAMPLE_RATE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_MAX =
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_thermal_event - vendor subcmd attributes to
* report thermal events from driver to user space.
* enum values are used for NL attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT sub command.
*/
enum qca_wlan_vendor_attr_thermal_event {
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_INVALID = 0,
/* Temperature value (degree Celsius) from driver.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_TEMPERATURE,
/* Indication of resume completion from power save mode.
* NLA_FLAG attribute.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_RESUME_COMPLETE,
/* keep last */
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_MAX =
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST - 1,
};
/**
* enum he_fragmentation_val - HE fragmentation support values
* Indicates level of dynamic fragmentation that is supported by
* a STA as a recipient.
* HE fragmentation values are defined in IEEE P802.11ax/D2.0, 9.4.2.237.2
* (HE MAC Capabilities Information field) and are used in HE Capabilities
* element to advertise the support. These values are validated in the driver
* to check the device capability and advertised in the HE Capabilities
* element. These values are used to configure testbed device to allow the
* advertised hardware capabilities to be downgraded for testing purposes.
*
* @HE_FRAG_DISABLE: no support for dynamic fragmentation
* @HE_FRAG_LEVEL1: support for dynamic fragments that are
* contained within an MPDU or S-MPDU, no support for dynamic fragments
* within an A-MPDU that is not an S-MPDU.
* @HE_FRAG_LEVEL2: support for dynamic fragments that are
* contained within an MPDU or S-MPDU and support for up to one dynamic
* fragment for each MSDU, each A-MSDU if supported by the recipient, and
* each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an
* MPDU or S-MPDU.
* @HE_FRAG_LEVEL3: support for dynamic fragments that are
* contained within an MPDU or S-MPDU and support for multiple dynamic
* fragments for each MSDU and for each A-MSDU if supported by the
* recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic
* fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU.
*/
enum he_fragmentation_val {
HE_FRAG_DISABLE,
HE_FRAG_LEVEL1,
HE_FRAG_LEVEL2,
HE_FRAG_LEVEL3,
};
/**
* enum he_mcs_config - HE MCS support configuration
*
* Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth.
* These values are used in driver to configure the HE MCS map to advertise
* Tx/Rx MCS map in HE capability and these values are applied for all the
* streams supported by the device. To configure MCS for different bandwidths,
* vendor command needs to be sent using this attribute with appropriate value.
* For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS
* attribute with HE_80_MCS0_7. And to configure HE MCS for HE_160_MCS0_11
* send this command using HE MCS config attribute with value HE_160_MCS0_11.
* These values are used to configure testbed device to allow the advertised
* hardware capabilities to be downgraded for testing purposes. The enum values
* are defined such that BIT[1:0] indicates the MCS map value. Values 3,7 and
* 11 are not used as BIT[1:0] value is 3 which is used to disable MCS map.
* These values are validated in the driver before setting the MCS map and
* driver returns error if the input is other than these enum values.
*
* @HE_80_MCS0_7: support for HE 80/40/20 MHz MCS 0 to 7
* @HE_80_MCS0_9: support for HE 80/40/20 MHz MCS 0 to 9
* @HE_80_MCS0_11: support for HE 80/40/20 MHz MCS 0 to 11
* @HE_160_MCS0_7: support for HE 160 MHz MCS 0 to 7
* @HE_160_MCS0_9: support for HE 160 MHz MCS 0 to 9
* @HE_160_MCS0_11: support for HE 160 MHz MCS 0 to 11
* @HE_80P80_MCS0_7: support for HE 80p80 MHz MCS 0 to 7
* @HE_80P80_MCS0_9: support for HE 80p80 MHz MCS 0 to 9
* @HE_80P80_MCS0_11: support for HE 80p80 MHz MCS 0 to 11
*/
enum he_mcs_config {
HE_80_MCS0_7 = 0,
HE_80_MCS0_9 = 1,
HE_80_MCS0_11 = 2,
HE_160_MCS0_7 = 4,
HE_160_MCS0_9 = 5,
HE_160_MCS0_11 = 6,
HE_80P80_MCS0_7 = 8,
HE_80P80_MCS0_9 = 9,
HE_80P80_MCS0_11 = 10,
};
/**
* enum qca_wlan_ba_session_config - BA session configuration
*
* Indicates the configuration values for BA session configuration attribute.
*
* @QCA_WLAN_ADD_BA: Establish a new BA session with given configuration.
* @QCA_WLAN_DELETE_BA: Delete the existing BA session for given TID.
*/
enum qca_wlan_ba_session_config {
QCA_WLAN_ADD_BA = 1,
QCA_WLAN_DELETE_BA = 2,
};
/**
* enum qca_wlan_ac_type - Access category type
*
* Indicates the access category type value.
*
* @QCA_WLAN_AC_BE: BE access category
* @QCA_WLAN_AC_BK: BK access category
* @QCA_WLAN_AC_VI: VI access category
* @QCA_WLAN_AC_VO: VO access category
* @QCA_WLAN_AC_ALL: All ACs
*/
enum qca_wlan_ac_type {
QCA_WLAN_AC_BE = 0,
QCA_WLAN_AC_BK = 1,
QCA_WLAN_AC_VI = 2,
QCA_WLAN_AC_VO = 3,
QCA_WLAN_AC_ALL = 4,
};
/**
* enum qca_wlan_he_ltf_cfg - HE LTF configuration
*
* Indicates the HE LTF configuration value.
*
* @QCA_WLAN_HE_LTF_AUTO: HE-LTF is automatically set to the mandatory HE-LTF,
* based on the GI setting
* @QCA_WLAN_HE_LTF_1X: 1X HE LTF is 3.2us LTF
* @QCA_WLAN_HE_LTF_2X: 2X HE LTF is 6.4us LTF
* @QCA_WLAN_HE_LTF_4X: 4X HE LTF is 12.8us LTF
*/
enum qca_wlan_he_ltf_cfg {
QCA_WLAN_HE_LTF_AUTO = 0,
QCA_WLAN_HE_LTF_1X = 1,
QCA_WLAN_HE_LTF_2X = 2,
QCA_WLAN_HE_LTF_4X = 3,
};
/**
* enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration
*
* Indicates the HE trigger frame MAC padding duration value.
*
* @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to
* process the trigger frame.
* @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for
* trigger frame.
* @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for
* trigger frame.
*/
enum qca_wlan_he_mac_padding_dur {
QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0,
QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1,
QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2,
};
/**
* enum qca_wlan_he_om_ctrl_ch_bw - HE OM control field BW configuration
*
* Indicates the HE Operating mode control channel width setting value.
*
* @QCA_WLAN_HE_OM_CTRL_BW_20M: Primary 20 MHz
* @QCA_WLAN_HE_OM_CTRL_BW_40M: Primary 40 MHz
* @QCA_WLAN_HE_OM_CTRL_BW_80M: Primary 80 MHz
* @QCA_WLAN_HE_OM_CTRL_BW_160M: 160 MHz and 80+80 MHz
*/
enum qca_wlan_he_om_ctrl_ch_bw {
QCA_WLAN_HE_OM_CTRL_BW_20M = 0,
QCA_WLAN_HE_OM_CTRL_BW_40M = 1,
QCA_WLAN_HE_OM_CTRL_BW_80M = 2,
QCA_WLAN_HE_OM_CTRL_BW_160M = 3,
};
/**
* enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for
* HE operating mode control transmit request. These attributes are
* sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value
* indicates the maximum number of spatial streams, NSS, that the STA
* supports in reception for PPDU bandwidths less than or equal to 80 MHz
* and is set to NSS - 1.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW: Mandatory 8-bit unsigned value
* indicates the operating channel width supported by the STA for both
* reception and transmission. Uses enum qca_wlan_he_om_ctrl_ch_bw values.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE: Mandatory 8-bit unsigned value
* indicates the all trigger based UL MU operations by the STA.
* 0 - UL MU operations are enabled by the STA.
* 1 - All triggered UL MU transmissions are suspended by the STA.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS: Mandatory 8-bit unsigned value
* indicates the maximum number of space-time streams, NSTS, that
* the STA supports in transmission and is set to NSTS - 1.
*
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE: 8-bit unsigned value
* combined with the UL MU Disable subfield and the recipient's setting
* of the OM Control UL MU Data Disable RX Support subfield in the HE MAC
* capabilities to determine which HE TB PPDUs are possible by the
* STA to transmit.
* 0 - UL MU data operations are enabled by the STA.
* 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable
* bit is not set, else UL MU Tx is suspended.
*
*/
enum qca_wlan_vendor_attr_he_omi_tx {
QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1,
QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2,
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3,
QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4,
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5,
/* keep last */
QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX =
QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
};
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
*/
enum qca_wlan_vendor_attr_wifi_test_config {
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0,
/* 8-bit unsigned value to configure the driver to enable/disable
* WMM feature. This attribute is used to configure testbed device.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1,
/* 8-bit unsigned value to configure the driver to accept/reject
* the addba request from peer. This attribute is used to configure
* the testbed device.
* 1-accept addba, 0-reject addba
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2,
/* 8-bit unsigned value to configure the driver to send or not to
* send the addba request to peer.
* This attribute is used to configure the testbed device.
* 1-send addba, 0-do not send addba
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3,
/* 8-bit unsigned value to indicate the HE fragmentation support.
* Uses enum he_fragmentation_val values.
* This attribute is used to configure the testbed device to
* allow the advertised hardware capabilities to be downgraded
* for testing purposes.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4,
/* 8-bit unsigned value to indicate the HE MCS support.
* Uses enum he_mcs_config values.
* This attribute is used to configure the testbed device to
* allow the advertised hardware capabilities to be downgraded
* for testing purposes.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5,
/* 8-bit unsigned value to configure the driver to allow or not to
* allow the connection with WEP/TKIP in HT/VHT/HE modes.
* This attribute is used to configure the testbed device.
* 1-allow WEP/TKIP in HT/VHT/HE, 0-do not allow WEP/TKIP.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WEP_TKIP_IN_HE = 6,
/* 8-bit unsigned value to configure the driver to add a
* new BA session or delete the existing BA session for
* given TID. ADDBA command uses the buffer size and TID
* configuration if user specifies the values else default
* value for buffer size is used for all TIDs if the TID
* also not specified. For DEL_BA command TID value is
* required to process the command.
* Uses enum qca_wlan_ba_session_config values.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADD_DEL_BA_SESSION = 7,
/* 16-bit unsigned value to configure the buffer size in addba
* request and response frames.
* This attribute is used to configure the testbed device.
* The range of the value is 0 to 256.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADDBA_BUFF_SIZE = 8,
/* 8-bit unsigned value to configure the buffer size in addba
* request and response frames.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BA_TID = 9,
/* 8-bit unsigned value to configure the no ack policy.
* To configure no ack policy, access category value is
* required to process the command.
* This attribute is used to configure the testbed device.
* 1 - enable no ack, 0 - disable no ack.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_NO_ACK = 10,
/* 8-bit unsigned value to configure the AC for no ack policy
* This attribute is used to configure the testbed device.
* Uses the enum qca_wlan_ac_type values.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_NO_ACK_AC = 11,
/* 8-bit unsigned value to configure the HE LTF
* This attribute is used to configure the testbed device.
* Uses the enum qca_wlan_he_ltf_cfg values.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_LTF = 12,
/* 8-bit unsigned value to configure the tx beamformee.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13,
/* 8-bit unsigned value to configure the tx beamformee number
* of space-time streams.
* This attribute is used to configure the testbed device.
* The range of the value is 0 to 8.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14,
/* 8-bit unsigned value to configure the MU EDCA params for given AC
* This attribute is used to configure the testbed device.
* Uses the enum qca_wlan_ac_type values.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15,
/* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC
* To configure MU EDCA AIFSN value, MU EDCA access category value
* is required to process the command.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16,
/* 8-bit unsigned value to configure the MU EDCA ECW min value for
* given AC.
* To configure MU EDCA ECW min value, MU EDCA access category value
* is required to process the command.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17,
/* 8-bit unsigned value to configure the MU EDCA ECW max value for
* given AC.
* To configure MU EDCA ECW max value, MU EDCA access category value
* is required to process the command.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18,
/* 8-bit unsigned value to configure the MU EDCA timer for given AC
* To configure MU EDCA timer value, MU EDCA access category value
* is required to process the command.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19,
/* 8-bit unsigned value to configure the HE trigger frame MAC padding
* duration.
* This attribute is used to configure the testbed device.
* Uses the enum qca_wlan_he_mac_padding_dur values.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20,
/* 8-bit unsigned value to override the MU EDCA params to defaults
* regardless of the AP beacon MU EDCA params. If it is enabled use
* the default values else use the MU EDCA params from AP beacon.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21,
/* 8-bit unsigned value to configure the support for receiving
* an MPDU that contains an operating mode control subfield.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22,
/* Nested attribute values required to setup the TWT session.
* enum qca_wlan_vendor_attr_twt_setup provides the necessary
* information to set up the session. It contains broadcast flags,
* set_up flags, trigger value, flow type, flow ID, wake interval
* exponent, protection, target wake time, wake duration, wake interval
* mantissa. These nested attributes are used to setup a host triggered
* TWT session.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23,
/* This nested attribute is used to terminate the current TWT session.
* It does not currently carry any attributes.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24,
/* This nested attribute is used to suspend the current TWT session.
* It does not currently carry any attributes.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25,
/* Nested attribute values to indicate the request for resume.
* This attribute is used to resume the TWT session.
* enum qca_wlan_vendor_attr_twt_resume provides the necessary
* parameters required to resume the TWT session.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26,
/* 8-bit unsigned value to set the HE operating mode control
* (OM CTRL) Channel Width subfield.
* The Channel Width subfield indicates the operating channel width
* supported by the STA for both reception and transmission.
* Uses the enum qca_wlan_he_om_ctrl_ch_bw values.
* This setting is cleared with the
* QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
* flag attribute to reset defaults.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_BW = 27,
/* 8-bit unsigned value to configure the number of spatial
* streams in HE operating mode control field.
* This setting is cleared with the
* QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
* flag attribute to reset defaults.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_NSS = 28,
/* Flag attribute to configure the UL MU disable bit in
* HE operating mode control field.
* This setting is cleared with the
* QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
* flag attribute to reset defaults.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_UL_MU_DISABLE = 29,
/* Flag attribute to clear the previously set HE operating mode
* control field configuration.
* This attribute is used to configure the testbed device to reset
* defaults to clear any previously set HE operating mode control
* field configuration.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG = 30,
/* 8-bit unsigned value to configure HE single user PPDU
* transmission. By default this setting is disabled and it
* is disabled in the reset defaults of the device configuration.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_SUPPDU = 31,
/* 8-bit unsigned value to configure action frame transmission
* in HE trigger based PPDU transmission.
* By default this setting is disabled and it is disabled in
* the reset defaults of the device configuration.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_ACTION_TX_TB_PPDU = 32,
/* Nested attribute to indicate HE operating mode control field
* transmission. It contains operating mode control field Nss,
* channel bandwidth, Tx Nsts and UL MU disable attributes.
* These nested attributes are used to send HE operating mode control
* with configured values.
* Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes.
* This attribute is used to configure the testbed device.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33,
/* 8-bit unsigned value to configure +HTC_HE support to indicate the
* support for the reception of a frame that carries an HE variant
* HT Control field.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_HTC_HE_SUPP = 34,
/* 8-bit unsigned value to configure VHT support in 2.4G band.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_2G_VHT = 35,
/* 8-bit unsigned value to configure HE testbed defaults.
* This attribute is used to configure the testbed device.
* 1-set the device HE capabilities to testbed defaults.
* 0-reset the device HE capabilities to supported config.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SET_HE_TESTBED_DEFAULTS = 36,
/* 8-bit unsigned value to configure TWT request support.
* This attribute is used to configure the testbed device.
* 1-enable, 0-disable.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TWT_REQ_SUPPORT = 37,
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_bss_filter - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
* The user can add/delete the filter by specifying the BSSID/STA MAC address in
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR, filter type in
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE, add/delete action in
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION in the request. The user can get the
* statistics of an unassociated station by specifying the MAC address in
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR, station type in
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE, GET action in
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION in the request. The user also can get
* the statistics of all unassociated stations by specifying the Broadcast MAC
* address (ff:ff:ff:ff:ff:ff) in QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR with
* above procedure. In the response, driver shall specify statistics
* information nested in QCA_WLAN_VENDOR_ATTR_BSS_FILTER_STA_STATS.
*/
enum qca_wlan_vendor_attr_bss_filter {
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR = 1,
/* Other BSS filter type, unsigned 8 bit value. One of the values
* in enum qca_wlan_vendor_bss_filter_type.
*/
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE = 2,
/* Other BSS filter action, unsigned 8 bit value. One of the values
* in enum qca_wlan_vendor_bss_filter_action.
*/
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION = 3,
/* Array of nested attributes where each entry is the statistics
* information of the specified station that belong to another BSS.
* Attributes for each entry are taken from enum
* qca_wlan_vendor_bss_filter_sta_stats.
* Other BSS station configured in
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER with filter type
* QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA.
* Statistics returned by QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER
* with filter action QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET.
*/
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_STA_STATS = 4,
/* keep last */
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAX =
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_bss_filter_type - Type of
* filter used in other BSS filter operations. Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
*
* @QCA_WLAN_VENDOR_BSS_FILTER_TYPE_BSSID: BSSID filter
* @QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA: Station MAC address filter
*/
enum qca_wlan_vendor_bss_filter_type {
QCA_WLAN_VENDOR_BSS_FILTER_TYPE_BSSID,
QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA,
};
/**
* enum qca_wlan_vendor_bss_filter_action - Type of
* action in other BSS filter operations. Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
*
* @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_ADD: Add filter
* @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_DEL: Delete filter
* @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET: Get the statistics
*/
enum qca_wlan_vendor_bss_filter_action {
QCA_WLAN_VENDOR_BSS_FILTER_ACTION_ADD,
QCA_WLAN_VENDOR_BSS_FILTER_ACTION_DEL,
QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET,
};
/**
* enum qca_wlan_vendor_bss_filter_sta_stats - Attributes for
* the statistics of a specific unassociated station belonging to another BSS.
* The statistics provides information of the unassociated station
* filtered by other BSS operation - such as MAC, signal value.
* Used by the vendor command QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER.
*
* @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAC: MAC address of the station.
* @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI: Last received signal strength
* of the station. Unsigned 8 bit number containing RSSI.
* @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI_TS: Time stamp of the host
* driver for the last received RSSI. Unsigned 64 bit number containing
* nanoseconds from the boottime.
*/
enum qca_wlan_vendor_bss_filter_sta_stats {
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_INVALID = 0,
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAC = 1,
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI = 2,
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI_TS = 3,
/* keep last */
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST,
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAX =
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST - 1
};
/* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute
* QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
*/
enum qca_wlan_nan_ext_subcmd_type {
/* Subcmd of type NAN Enable Request */
QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1,
/* Subcmd of type NAN Disable Request */
QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2,
};
/**
* enum qca_wlan_vendor_attr_nan_params - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
*/
enum qca_wlan_vendor_attr_nan_params {
QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0,
/* Carries NAN command for firmware component. Every vendor command
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a
* payload containing the NAN command. NLA_BINARY attribute.
*/
QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1,
/* Indicates the type of NAN command sent with
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type
* describes the possible range of values. This attribute is mandatory
* if the command being issued is either
* QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or
* QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2,
/* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz
* band. This attribute is mandatory when command type is
* QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3,
/* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz
* band. This attribute is optional and should be included when command
* type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery
* has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4,
/* keep last */
QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX =
QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
* TWT (Target Wake Time) setup request. These attributes are sent as part of
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
* %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
* Disable (flag attribute not present) - Individual TWT
* Enable (flag attribute present) - Broadcast TWT.
* Individual means the session is between the STA and the AP.
* This session is established using a separate negotiation between
* STA and AP.
* Broadcast means the session is across multiple STAs and an AP. The
* configuration parameters are announced in Beacon frames by the AP.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8).
* Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to
* specify the TWT request type
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute
* Enable (flag attribute present) - TWT with trigger support.
* Disable (flag attribute not present) - TWT without trigger support.
* Trigger means the AP will send the trigger frame to allow STA to send data.
* Without trigger, the STA will wait for the MU EDCA timer before
* transmitting the data.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8)
* 0 - Announced TWT - In this mode, STA may skip few service periods to
* save more power. If STA wants to wake up, it will send a PS-POLL/QoS
* NULL frame to AP.
* 1 - Unannounced TWT - The STA will wakeup during every SP.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8)
* Flow ID is the unique identifier for each TWT session.
* Currently this is not required and dialog ID will be set to zero.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
* This attribute (exp) is used along with the mantissa to derive the
* wake interval using the following formula:
* pow(2,exp) = wake_intvl_us/wake_intvl_mantis
* Wake interval is the interval between 2 successive SP.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute
* Enable (flag attribute present) - Protection required.
* Disable (flag attribute not present) - Protection not required.
* If protection is enabled, then the AP will use protection
* mechanism using RTS/CTS to self to reserve the airtime.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32)
* This attribute is used as the SP offset which is the offset from
* TSF after which the wake happens. The units are in microseconds. If
* this attribute is not provided, then the value will be set to zero.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32)
* This is the duration of the service period. The units are in TU.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32)
* This attribute is used to configure wake interval mantissa.
* The units are in TU.
*/
enum qca_wlan_vendor_attr_twt_setup {
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX =
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_twt_resume: Represents attributes for
* TWT (Target Wake Time) resume request. These attributes are sent as part of
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
* %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
* This attribute is used as the SP offset which is the offset from
* TSF after which the wake happens. The units are in microseconds.
* If this attribute is not provided, then the value will be set to
* zero.
*
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32)
* This attribute represents the next TWT subfield size.
*/
enum qca_wlan_vendor_attr_twt_resume {
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1,
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX =
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_twt_setup_req_type - Required (u8)
* Represents the setup type being requested for TWT.
* @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT
* parameters but relying on AP to fill the parameters during the negotiation.
* @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested
* values which the AP may accept or AP may provide alternative parameters
* which the STA may accept.
* @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any
* alternate parameters than the requested ones.
*/
enum qca_wlan_vendor_twt_setup_req_type {
QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1,
QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2,
QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3,
};
/**
* enum qca_wlan_roam_scan_event_type - Type of roam scan event
*
* Indicates the type of roam scan event sent by firmware/driver.
*
* @QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT: Roam scan trigger event type.
* @QCA_WLAN_ROAM_SCAN_STOP_EVENT: Roam scan stopped event type.
*/
enum qca_wlan_roam_scan_event_type {
QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT = 0,
QCA_WLAN_ROAM_SCAN_STOP_EVENT = 1,
};
/**
* enum qca_wlan_roam_scan_trigger_reason - Roam scan trigger reason
*
* Indicates the reason for triggering roam scan by firmware/driver.
*
* @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI: Due to low RSSI of current AP.
* @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER: Due to high packet error rate.
*/
enum qca_wlan_roam_scan_trigger_reason {
QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI = 0,
QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER = 1,
};
/**
* enum qca_wlan_vendor_attr_roam_scan - Vendor subcmd attributes to report
* roam scan related details from driver/firmware to user space. enum values
* are used for NL attributes sent with
* %QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT sub command.
*/
enum qca_wlan_vendor_attr_roam_scan {
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_INVALID = 0,
/* Encapsulates type of roam scan event being reported. enum
* qca_wlan_roam_scan_event_type describes the possible range of
* values. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_EVENT_TYPE = 1,
/* Encapsulates reason for triggering roam scan. enum
* qca_wlan_roam_scan_trigger_reason describes the possible range of
* values. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_TRIGGER_REASON = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_MAX =
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by
* attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor
* command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG.
* @QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL: CFR method using QoS Null frame
* @QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE: CFR method using QoS Null frame
* with phase
* @QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE: CFR method using Probe Response frame
*/
enum qca_wlan_vendor_cfr_method {
QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL = 0,
QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE = 1,
QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE = 2,
};
/**
* enum qca_wlan_vendor_cfr_capture_type - QCA vendor CFR capture type used by
* attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE.
* @QCA_WLAN_VENDOR_CFR_DIRECT_FTM: Filter directed FTM ACK frames.
* @QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK: Filter all FTM ACK frames.
* @QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP: Filter NDPA NDP directed frames.
* @QCA_WLAN_VENDOR_CFR_TA_RA: Filter frames based on TA/RA/Subtype which
* is provided by one or more of below attributes:
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER
* @QCA_WLAN_CFR_ALL_PACKET: Filter all packets.
* @QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL: Filter all NDPA NDP frames.
*/
enum qca_wlan_vendor_cfr_capture_type {
QCA_WLAN_VENDOR_CFR_DIRECT_FTM = 0,
QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK = 1,
QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP = 2,
QCA_WLAN_VENDOR_CFR_TA_RA = 3,
QCA_WLAN_VENDOR_CFR_ALL_PACKET = 4,
QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL = 5,
};
/**
* enum qca_wlan_vendor_peer_cfr_capture_attr - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG to configure peer
* Channel Frequency Response capture parameters and enable periodic CFR
* capture.
*
* @QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR: Optional (6-byte MAC address)
* MAC address of peer. This is for CFR version 1 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE: Required (flag)
* Enable peer CFR capture. This attribute is mandatory to enable peer CFR
* capture. If this attribute is not present, peer CFR capture is disabled.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH: Optional (u8)
* BW of measurement, attribute uses the values in enum nl80211_chan_width
* Supported values: 20, 40, 80, 80+80, 160.
* Note that all targets may not support all bandwidths.
* This attribute is mandatory for version 1 if attribute
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY: Optional (u32)
* Periodicity of CFR measurement in milliseconds.
* Periodicity should be a multiple of Base timer.
* Current Base timer value supported is 10 milliseconds (default).
* 0 for one shot capture.
* This attribute is mandatory for version 1 if attribute
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD: Optional (u8)
* Method used to capture Channel Frequency Response.
* Attribute uses the values defined in enum qca_wlan_vendor_cfr_method.
* This attribute is mandatory for version 1 if attribute
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
*
* @QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE: Optional (flag)
* Enable periodic CFR capture.
* This attribute is mandatory for version 1 to enable Periodic CFR capture.
* If this attribute is not present, periodic CFR capture is disabled.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION: Optional (u8)
* Value is 1 or 2 since there are two versions of CFR capture. Two versions
* can't be enabled at same time. This attribute is mandatory if target
* support both versions and use one of them.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP: Optional (u32)
* This attribute is mandatory for version 2 if
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY is used.
* Bits 15:0 bitfield indicates which group is to be enabled.
* Bits 31:16 Reserved for future use.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION: Optional (u32)
* CFR capture duration in microsecond. This attribute is mandatory for
* version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL: Optional (u32)
* CFR capture interval in microsecond. This attribute is mandatory for
* version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION is used.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE: Optional (u32)
* CFR capture type is defined in enum qca_wlan_vendor_cfr_capture_type.
* This attribute is mandatory for version 2.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK: Optional (u64)
* Bitfield indicating which user in the current UL MU transmissions are
* enabled for CFR capture. Bits 36 to 0 indicate user indexes for 37 users in
* a UL MU transmission. If bit 0 is set, the CFR capture will happen for user
* index 0 in the current UL MU transmission. If bits 0 and 2 are set, CFR
* capture for UL MU TX corresponds to user indices 0 and 2. Bits 63:37 are
* reserved for future use. This is for CFR version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT: Optional (u32)
* Indicates the number of consecutive RX frames to be skipped before CFR
* capture is enabled again. This is for CFR version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE: Nested attribute containing
* one or more %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY attributes.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY: Nested attribute containing
* the following group attributes:
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER,
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER: Optional (u32)
* Target supports multiple groups for some configurations. The group number
* can be any value between 0 and 15. This is for CFR version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA: Optional (6-byte MAC address)
* Transmitter address which is used to filter frames. This MAC address takes
* effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK. This is for CFR
* version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA: Optional (6-byte MAC address)
* Receiver address which is used to filter frames. This MAC address takes
* effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK. This is for CFR
* version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK: Optional (6-byte MAC address)
* Mask of transmitter address which is used to filter frames. This is for CFR
* version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK: Optional (6-byte MAC address)
* Mask of receiver address which is used to filter frames. This is for CFR
* version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS: Optional (u32)
* Indicates frames with a specific NSS will be filtered for CFR capture.
* This is for CFR version 2 only. This is a bitmask. Bits 7:0 request CFR
* capture to be done for frames matching the NSS specified within this bitmask.
* Bits 31:8 are reserved for future use. Bits 7:0 map to NSS:
* bit 0 : NSS 1
* bit 1 : NSS 2
* ...
* bit 7 : NSS 8
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW: Optional (u32)
* Indicates frames with a specific bandwidth will be filtered for CFR capture.
* This is for CFR version 2 only. This is a bitmask. Bits 4:0 request CFR
* capture to be done for frames matching the bandwidths specified within this
* bitmask. Bits 31:5 are reserved for future use. Bits 4:0 map to bandwidth
* numerated in enum nl80211_band (although not all bands may be supported
* by a given device).
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER: Optional (u32)
* Management frames matching the subtype filter categories will be filtered in
* by MAC for CFR capture. This is a bitmask in which each bit represents the
* corresponding Management frame subtype value per IEEE Std 802.11-2016,
* 9.2.4.1.3 Type and Subtype subfields. For example, Beacon frame control type
* is 8 and its value is 1 << 8 = 0x100. This is for CFR version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER: Optional (u32)
* Control frames matching the subtype filter categories will be filtered in by
* MAC for CFR capture. This is a bitmask in which each bit represents the
* corresponding Control frame subtype value per IEEE Std 802.11-2016,
* 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER: Optional (u32)
* Data frames matching the subtype filter categories will be filtered in by
* MAC for CFR capture. This is a bitmask in which each bit represents the
* corresponding Data frame subtype value per IEEE Std 802.11-2016,
* 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only.
*/
enum qca_wlan_vendor_peer_cfr_capture_attr {
QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR = 1,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE = 2,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH = 3,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY = 4,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD = 5,
QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE = 6,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION = 7,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP = 8,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION = 9,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL = 10,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE = 11,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK = 12,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT = 13,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE = 14,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY = 15,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER = 16,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA = 17,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA = 18,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK = 19,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK = 20,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS = 21,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW = 22,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER = 23,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER = 24,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER = 25,
/* Keep last */
QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_PEER_CFR_MAX =
QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST - 1,
};
/**
* enum qca_wlan_throughput_level - Current throughput level
*
* Indicates the current level of throughput calculated by the driver. The
* driver may choose different thresholds to decide whether the throughput level
* is low or medium or high based on variety of parameters like physical link
* capacity of the current connection, the number of packets being dispatched
* per second, etc. The throughput level events might not be consistent with the
* actual current throughput value being observed.
*
* @QCA_WLAN_THROUGHPUT_LEVEL_LOW: Low level of throughput
* @QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM: Medium level of throughput
* @QCA_WLAN_THROUGHPUT_LEVEL_HIGH: High level of throughput
*/
enum qca_wlan_throughput_level {
QCA_WLAN_THROUGHPUT_LEVEL_LOW = 0,
QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM = 1,
QCA_WLAN_THROUGHPUT_LEVEL_HIGH = 2,
};
/**
* enum qca_wlan_vendor_attr_throughput_change - Vendor subcmd attributes to
* report throughput changes from the driver to user space. enum values are used
* for netlink attributes sent with
* %QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT sub command.
*/
enum qca_wlan_vendor_attr_throughput_change {
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_INVALID = 0,
/* Indicates the direction of throughput in which the change is being
* reported. u8 attribute. Value is 0 for TX and 1 for RX.
*/
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_DIRECTION = 1,
/* Indicates the newly observed throughput level. enum
* qca_wlan_throughput_level describes the possible range of values.
* u8 attribute.
*/
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_THROUGHPUT_LEVEL = 2,
/* Indicates the driver's guidance on the new value to be set to
* kernel's TCP parameter tcp_limit_output_bytes. u32 attribute. The
* driver may optionally include this attribute.
*/
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_LIMIT_OUTPUT_BYTES = 3,
/* Indicates the driver's guidance on the new value to be set to
* kernel's TCP parameter tcp_adv_win_scale. s8 attribute. Possible
* values are from -31 to 31. The driver may optionally include this
* attribute.
*/
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_ADV_WIN_SCALE = 4,
/* Indicates the driver's guidance on the new value to be set to
* kernel's TCP parameter tcp_delack_seg. u32 attribute. The driver may
* optionally include this attribute.
*/
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_DELACK_SEG = 5,
/* keep last */
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_MAX =
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1,
};
/**
* enum qca_coex_config_profiles - This enum defines different types of
* traffic streams that can be prioritized one over the other during coex
* scenarios.
* The types defined in this enum are categorized in the below manner.
* 0 - 31 values corresponds to WLAN
* 32 - 63 values corresponds to BT
* 64 - 95 values corresponds to Zigbee
* @QCA_WIFI_STA_DISCOVERY: Prioritize discovery frames for WLAN STA
* @QCA_WIFI_STA_CONNECTION: Prioritize connection frames for WLAN STA
* @QCA_WIFI_STA_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN STA
* @QCA_WIFI_STA_DATA : Prioritize data frames for WLAN STA
* @QCA_WIFI_STA_ALL: Priritize all frames for WLAN STA
* @QCA_WIFI_SAP_DISCOVERY: Prioritize discovery frames for WLAN SAP
* @QCA_WIFI_SAP_CONNECTION: Prioritize connection frames for WLAN SAP
* @QCA_WIFI_SAP_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN SAP
* @QCA_WIFI_SAP_DATA: Prioritize data frames for WLAN SAP
* @QCA_WIFI_SAP_ALL: Prioritize all frames for WLAN SAP
* @QCA_BT_A2DP: Prioritize BT A2DP
* @QCA_BT_BLE: Prioritize BT BLE
* @QCA_BT_SCO: Prioritize BT SCO
* @QCA_ZB_LOW: Prioritize Zigbee Low
* @QCA_ZB_HIGH: Prioritize Zigbee High
*/
enum qca_coex_config_profiles {
/* 0 - 31 corresponds to WLAN */
QCA_WIFI_STA_DISCOVERY = 0,
QCA_WIFI_STA_CONNECTION = 1,
QCA_WIFI_STA_CLASS_3_MGMT = 2,
QCA_WIFI_STA_DATA = 3,
QCA_WIFI_STA_ALL = 4,
QCA_WIFI_SAP_DISCOVERY = 5,
QCA_WIFI_SAP_CONNECTION = 6,
QCA_WIFI_SAP_CLASS_3_MGMT = 7,
QCA_WIFI_SAP_DATA = 8,
QCA_WIFI_SAP_ALL = 9,
QCA_WIFI_CASE_MAX = 31,
/* 32 - 63 corresponds to BT */
QCA_BT_A2DP = 32,
QCA_BT_BLE = 33,
QCA_BT_SCO = 34,
QCA_BT_CASE_MAX = 63,
/* 64 - 95 corresponds to Zigbee */
QCA_ZB_LOW = 64,
QCA_ZB_HIGH = 65,
QCA_ZB_CASE_MAX = 95,
/* 0xff is default value if the u8 profile value is not set. */
QCA_COEX_CONFIG_PROFILE_DEFAULT_VALUE = 255
};
/**
* enum qca_vendor_attr_coex_config_types - Coex configurations types.
* This enum defines the valid set of values of coex configuration types. These
* values may used by attribute
* %QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE.
*
* @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET: Reset all the
* weights to default values.
* @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START: Start to config
* weights with configurability value.
*/
enum qca_vendor_attr_coex_config_types {
QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET = 1,
QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START = 2,
};
/**
* enum qca_vendor_attr_coex_config - Specifies vendor coex config attributes
*
* @QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES: This attribute contains variable
* length array of 8-bit values from enum qca_coex_config_profiles.
* FW will prioritize the profiles in the order given in the array encapsulated
* in this attribute.
* For example:
* -----------------------------------------------------------------------
* | 1 | 34 | 32 | 65 |
* -----------------------------------------------------------------------
* If the attribute contains the values defined in above array then it means
* 1) Wifi STA connection has priority over BT_SCO, BT_A2DP and ZIGBEE HIGH.
* 2) BT_SCO has priority over BT_A2DP.
* 3) BT_A2DP has priority over ZIGBEE HIGH.
* Profiles which are not listed in this array shall not be preferred over the
* profiles which are listed in the array as a part of this attribute.
*/
enum qca_vendor_attr_coex_config {
QCA_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES = 1,
/* Keep last */
QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST,
QCA_VENDOR_ATTR_COEX_CONFIG_MAX =
QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST - 1,
};
/**
* enum qca_vendor_attr_coex_config_three_way - Specifies vendor coex config
* attributes
* Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG
*
* QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE: u32 attribute.
* Indicate config type.
* The config types are 32-bit values from qca_vendor_attr_coex_config_types
*
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1: u32 attribute.
* Indicate the Priority 1 profiles.
* The profiles are 8-bit values from enum qca_coex_config_profiles.
* In same priority level, maximum to 4 profiles can be set here.
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2: u32 attribute.
* Indicate the Priority 2 profiles.
* The profiles are 8-bit values from enum qca_coex_config_profiles.
* In same priority level, maximum to 4 profiles can be set here.
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3: u32 attribute.
* Indicate the Priority 3 profiles.
* The profiles are 8-bit values from enum qca_coex_config_profiles.
* In same priority level, maximum to 4 profiles can be set here.
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4: u32 attribute.
* Indicate the Priority 4 profiles.
* The profiles are 8-bit values from enum qca_coex_config_profiles.
* In same priority level, maximum to 4 profiles can be set here.
* NOTE:
* Limitations for QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_x priority
* arrangement:
* 1: In the same u32 attribute (priority x), the profiles enum values own
* same priority level.
* 2: 0xff is default value if the u8 profile value is not set.
* 3: max to 4 rules/profiles in same priority level.
* 4: max to 4 priority level (priority 1 - priority 4)
* 5: one priority level only supports one scenario from WLAN/BT/ZB,
* hybrid rules not support.
* 6: if WMI_COEX_CONFIG_THREE_WAY_COEX_RESET called, priority x will
* remain blank to reset all parameters.
* For example:
*
* If the attributes as follow:
* priority 1:
* ------------------------------------
* | 0xff | 0 | 1 | 2 |
* ------------------------------------
* priority 2:
* -------------------------------------
* | 0xff | 0xff | 0xff | 32 |
* -------------------------------------
* priority 3:
* -------------------------------------
* | 0xff | 0xff | 0xff | 65 |
* -------------------------------------
* then it means:
* 1: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
* owns same priority level.
* 2: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
* has priority over BT_A2DP and ZB_HIGH.
* 3: BT_A2DP has priority over ZB_HIGH.
*/
enum qca_vendor_attr_coex_config_three_way {
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_INVALID = 0,
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE = 1,
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1 = 2,
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2 = 3,
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3 = 4,
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4 = 5,
/* Keep last */
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST,
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_MAX =
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_link_properties - Represent the link properties.
*
* @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR: MAC address of the peer
* (STA/AP) for the connected link.
* @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS: Attribute containing a
* &struct nl80211_sta_flag_update for the respective connected link. MAC
* address of the peer represented by
* QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR.
*/
enum qca_wlan_vendor_attr_link_properties {
QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0,
/* 1 - 3 are reserved */
QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR = 4,
QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS = 5,
/* Keep last */
QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST,
QCA_VENDOR_ATTR_LINK_PROPERTIES_MAX =
QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1,
};
/**
* enum qca_vendor_attr_peer_stats_cache_type - Represents peer stats cache type
* This enum defines the valid set of values of peer stats cache types. These
* values are used by attribute
* %QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS: Represents peer TX rate statistics
* @QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS: Represents peer RX rate statistics
* @QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS: Represents peer TX sojourn
* statistics
*/
enum qca_vendor_attr_peer_stats_cache_type {
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS,
QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS,
QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS,
};
/**
* enum qca_wlan_vendor_attr_peer_stats_cache_params - This enum defines
* attributes required for QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH
* Information in these attributes is used to flush peer rate statistics from
* the driver to user application.
*
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE: Unsigned 32-bit attribute
* Indicate peer statistics cache type.
* The statistics types are 32-bit values from
* enum qca_vendor_attr_peer_stats_cache_type.
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC: Unsigned 8-bit array
* of size 6 octets, representing the peer MAC address.
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA: Opaque data attribute
* containing buffer of statistics to send to application layer entity.
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE: Unsigned 64-bit attribute
* representing a cookie for peer unique session.
*/
enum qca_wlan_vendor_attr_peer_stats_cache_params {
QCA_WLAN_VENDOR_ATTR_PEER_STATS_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE = 1,
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC = 2,
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA = 3,
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE = 4,
/* Keep last */
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST,
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_MAX =
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST - 1
};
/**
* enum qca_mpta_helper_attr_zigbee_state - Current Zigbee state
* This enum defines all the possible states of Zigbee, which can be
* delivered in the QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE attribute.
*
* @ZIGBEE_IDLE: Zigbee in idle state
* @ZIGBEE_FORM_NETWORK: Zigbee forming network
* @ZIGBEE_WAIT_JOIN: Zigbee waiting for joining network
* @ZIGBEE_JOIN: Zigbee joining network
* @ZIGBEE_NETWORK_UP: Zigbee network is up
* @ZIGBEE_HMI: Zigbee in HMI mode
*/
enum qca_mpta_helper_attr_zigbee_state {
ZIGBEE_IDLE = 0,
ZIGBEE_FORM_NETWORK = 1,
ZIGBEE_WAIT_JOIN = 2,
ZIGBEE_JOIN = 3,
ZIGBEE_NETWORK_UP = 4,
ZIGBEE_HMI = 5,
};
/*
* enum qca_mpta_helper_vendor_attr - Attributes used in vendor sub-command
* QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG.
*/
enum qca_mpta_helper_vendor_attr {
QCA_MPTA_HELPER_VENDOR_ATTR_INVALID = 0,
/* Optional attribute used to update Zigbee state.
* enum qca_mpta_helper_attr_zigbee_state.
* NLA_U32 attribute.
*/
QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE = 1,
/* Optional attribute used to configure WLAN duration for Shape-OCS
* during interrupt.
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION.
* Value range 0 ~ 300 (ms).
* NLA_U32 attribute.
*/
QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION = 2,
/* Optional attribute used to configure non-WLAN duration for Shape-OCS
* during interrupt.
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION.
* Value range 0 ~ 300 (ms).
* NLA_U32 attribute.
*/
QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION = 3,
/* Optional attribute used to configure WLAN duration for Shape-OCS
* monitor period.
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION.
* Value range 0 ~ 300 (ms)
* NLA_U32 attribute
*/
QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION = 4,
/* Optional attribute used to configure non-WLAN duration for Shape-OCS
* monitor period.
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION.
* Value range 0 ~ 300 (ms)
* NLA_U32 attribute
*/
QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION = 5,
/* Optional attribute used to configure OCS interrupt duration.
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION.
* Value range 1000 ~ 20000 (ms)
* NLA_U32 attribute
*/
QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION = 6,
/* Optional attribute used to configure OCS monitor duration.
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION.
* Value range 1000 ~ 20000 (ms)
* NLA_U32 attribute
*/
QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION = 7,
/* Optional attribute used to notify WLAN firmware the current Zigbee
* channel.
* Value range 11 ~ 26
* NLA_U32 attribute
*/
QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_CHAN = 8,
/* Optional attribute used to configure WLAN mute duration.
* Value range 0 ~ 400 (ms)
* NLA_U32 attribute
*/
QCA_MPTA_HELPER_VENDOR_ATTR_WLAN_MUTE_DURATION = 9,
/* keep last */
QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST,
QCA_MPTA_HELPER_VENDOR_ATTR_MAX =
QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST - 1
};
Add QCA vendor command to support beacon reporting feature Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING to implement beacon reporting feature. Different operations required to implement this feature can be specified in QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. Userspace requests the driver/firmware to periodically report received Beacon frames whose BSSID matches the current connected BSS's MAC address. If userspace requests the driver/firmware to send beacon reports actively, the driver encapsulates the details of the beacon in an event and sends it to userspace asynchronously. Otherwise, the driver will only update the beacon in cfg80211 scan cache but will not send any event to userspace. If this command is not issued, the current behavior of the driver/firmware is to update the cfg80211 scan cache only when there is a scan issued by the host in progress or whenever there is a change in IEs of the Beacon frames from the current connected BSS. The userspace requests the driver/firmware to stop reporting beacons when reporting is not required anymore. If the driver/firmware is not able to receive Beacon frames because of other Wi-Fi operations such as off-channel activities, etc., the driver/firmware sends a pause event to userspace and stops reporting Beacon frames. The driver/firmware indicates whether the beacon reporting automatically resumes later by using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If userspace doesn't want the beacon reporting to be resumed automatically, userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to the driver to stop beacon reporting. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 21:23:05 +02:00
/**
* enum qca_wlan_vendor_beacon_reporting_op_types - Defines different types of
* operations for which %QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING can be used.
* Will be used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE.
*
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START: Sent by userspace to the driver
* to request the driver to start reporting Beacon frames.
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP: Sent by userspace to the driver to
* request the driver to stop reporting Beacon frames.
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO: Sent by the driver to
* userspace to report received Beacon frames.
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE: Sent by the driver to userspace
* to indicate that the driver is going to pause reporting Beacon frames.
*/
enum qca_wlan_vendor_beacon_reporting_op_types {
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START = 0,
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP = 1,
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO = 2,
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE = 3,
};
/**
* enum qca_wlan_vendor_beacon_reporting_pause_reasons - Defines different types
* of reasons for which the driver is pausing reporting Beacon frames. Will be
* used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON.
*
* @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED: For unspecified
* reasons.
* @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED: When the
* driver/firmware is starting a scan.
* @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED: When the
* driver/firmware disconnects from the ESS and indicates the disconnection to
* userspace (non-seamless roaming case). This reason code will be used by the
* driver/firmware to indicate stopping of beacon report events. Userspace will
* need to start beacon reporting again (if desired) by sending vendor command
* QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START after the next connection is
* completed.
*/
enum qca_wlan_vendor_beacon_reporting_pause_reasons {
QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED = 0,
QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED = 1,
QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED = 2,
};
/*
* enum qca_wlan_vendor_attr_beacon_reporting_params - List of attributes used
* in vendor sub-command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING.
*/
enum qca_wlan_vendor_attr_beacon_reporting_params {
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_INVALID = 0,
/* Specifies the type of operation that the vendor command/event is
* intended for. Possible values for this attribute are defined in
* enum qca_wlan_vendor_beacon_reporting_op_types. u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE = 1,
/* Optionally set by userspace to request the driver to report Beacon
* frames using asynchronous vendor events when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute.
* If this flag is not set, the driver will only update Beacon frames in
* cfg80211 scan cache but not send any vendor events.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_ACTIVE_REPORTING = 2,
/* Optionally used by userspace to request the driver/firmware to report
* Beacon frames periodically when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START.
* u32 attribute, indicates the period of Beacon frames to be reported
* and in the units of beacon interval.
* If this attribute is missing in the command, then the default value
* of 1 will be assumed by driver, i.e., to report every Beacon frame.
* Zero is an invalid value.
* If a valid value is received for this attribute, the driver will
* update the cfg80211 scan cache periodically as per the value received
* in this attribute in addition to updating the cfg80211 scan cache
* when there is significant change in Beacon frame IEs.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PERIOD = 3,
/* Used by the driver to encapsulate the SSID when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
* u8 array with a maximum size of 32.
*
* When generating beacon report from non-MBSSID Beacon frame, the SSID
* will be taken from the SSID element of the received Beacon frame.
*
* When generating beacon report from Multiple BSSID Beacon frame and if
* the BSSID of the current connected BSS matches the BSSID of the
* transmitting BSS, the SSID will be taken from the SSID element of the
* received Beacon frame.
*
* When generating beacon report from Multiple BSSID Beacon frame and if
* the BSSID of the current connected BSS matches the BSSID of one of
* the* nontransmitting BSSs, the SSID will be taken from the SSID field
* included in the nontransmitted BSS profile whose derived BSSID is
* same as the BSSID of the current connected BSS. When there is no
* nontransmitted BSS profile whose derived BSSID is same as the BSSID
* of current connected* BSS, this attribute will not be present.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_SSID = 4,
/* Used by the driver to encapsulate the BSSID of the AP to which STA is
* currently connected to when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array with a
* fixed size of 6 bytes.
*
* When generating beacon report from a Multiple BSSID beacon and the
* current connected BSSID matches one of the nontransmitted BSSIDs in a
* Multiple BSSID set, this BSSID will be that particular nontransmitted
* BSSID and not the transmitted BSSID (i.e., the transmitting address
* of the Beacon frame).
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BSSID = 5,
/* Used by the driver to encapsulate the frequency in MHz on which
* the Beacon frame was received when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is
* set to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_FREQ = 6,
/* Used by the driver to encapsulate the Beacon interval
* when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
* u16 attribute. The value will be copied from the Beacon frame and the
* units are TUs.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BI = 7,
/* Used by the driver to encapsulate the Timestamp field from the Beacon
* frame when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set
* to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
* u64 attribute.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_TSF = 8,
/* Used by the driver to encapsulate the CLOCK_BOOTTIME when this
* Beacon frame is received in the driver when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u64 attribute, in
* the units of nanoseconds. This value is expected to have accuracy of
* about 10 ms.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BOOTTIME_WHEN_RECEIVED = 9,
/* Used by the driver to encapsulate the IEs of the Beacon frame from
* which this event is generated when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_IES = 10,
/* Used by the driver to specify the reason for the driver/firmware to
* pause sending beacons to userspace when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. Possible values are
* defined in enum qca_wlan_vendor_beacon_reporting_pause_reasons, u32
* attribute.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON = 11,
/* Used by the driver to specify whether the driver will automatically
* resume reporting beacon events to userspace later (for example after
* the ongoing off-channel activity is completed etc.) when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. NLA_FLAG attribute.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES = 12,
/* Optionally set by userspace to request the driver not to resume
* beacon reporting after a pause is completed, when the
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute.
* If this flag is set, the driver will not resume beacon reporting
* after any pause in beacon reporting is completed. Userspace has to
* send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command again in order
* to initiate beacon reporting again. If this flag is set in the recent
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command, then in the
* subsequent QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE event (if any)
* the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES shall not be
* set by the driver. Setting this flag until and unless there is a
* specific need is not recommended as there is a chance of some beacons
* received after pause command and next start command being not
* reported.
*/
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME = 13,
Add QCA vendor command to support beacon reporting feature Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING to implement beacon reporting feature. Different operations required to implement this feature can be specified in QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. Userspace requests the driver/firmware to periodically report received Beacon frames whose BSSID matches the current connected BSS's MAC address. If userspace requests the driver/firmware to send beacon reports actively, the driver encapsulates the details of the beacon in an event and sends it to userspace asynchronously. Otherwise, the driver will only update the beacon in cfg80211 scan cache but will not send any event to userspace. If this command is not issued, the current behavior of the driver/firmware is to update the cfg80211 scan cache only when there is a scan issued by the host in progress or whenever there is a change in IEs of the Beacon frames from the current connected BSS. The userspace requests the driver/firmware to stop reporting beacons when reporting is not required anymore. If the driver/firmware is not able to receive Beacon frames because of other Wi-Fi operations such as off-channel activities, etc., the driver/firmware sends a pause event to userspace and stops reporting Beacon frames. The driver/firmware indicates whether the beacon reporting automatically resumes later by using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If userspace doesn't want the beacon reporting to be resumed automatically, userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to the driver to stop beacon reporting. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-03 21:23:05 +02:00
/* Keep last */
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST,
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_MAX =
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST - 1
};
/**
* enum qca_vendor_interop_issues_ap_type - Interop issue types
* This enum defines the valid set of values of interop issue types. These
* values are used by attribute %QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE.
*
* @QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS: The AP has power save interop issue
* when the STA's Qpower feature is enabled.
*/
enum qca_vendor_interop_issues_ap_type {
QCA_VENDOR_INTEROP_ISSUES_AP_INVALID = 0,
QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS = 1,
};
/**
* enum qca_vendor_attr_interop_issues_ap - attribute for AP with interop issues
* Values are used by %QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP.
*
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID: Invalid value
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE: Interop issue type
* 32-bit unsigned value. The values defined in enum
* qca_vendor_interop_issues_ap_type are used.
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST: APs' BSSID container
* array of nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID attributes.
* It is present and mandatory for the command but is not used for the event
* since only a single BSSID is reported in an event.
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID: AP's BSSID 6-byte MAC address.
* It is used within the nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST
* attribute in command case and without such encapsulation in the event case.
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST: last value
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX: max value
*/
enum qca_vendor_attr_interop_issues_ap {
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID,
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE,
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST,
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID,
/* keep last */
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX =
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST - 1
};
/**
* enum qca_vendor_oem_device_type - Represents the target device in firmware.
* It is used by QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO.
*
* @QCA_VENDOR_OEM_DEVICE_VIRTUAL: The command is intended for
* a virtual device.
*
* @QCA_VENDOR_OEM_DEVICE_PHYSICAL: The command is intended for
* a physical device.
*/
enum qca_vendor_oem_device_type {
QCA_VENDOR_OEM_DEVICE_VIRTUAL = 0,
QCA_VENDOR_OEM_DEVICE_PHYSICAL = 1,
};
/**
* enum qca_wlan_vendor_attr_oem_data_params - Used by the vendor command/event
* QCA_NL80211_VENDOR_SUBCMD_OEM_DATA.
*
* @QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA: The binary blob for the vendor
* command/event QCA_NL80211_VENDOR_SUBCMD_OEM_DATA are carried through this
* attribute.
* NLA_BINARY attribute, the max size is 1024 bytes.
*
* @QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO: The binary blob will be routed
* based on this field. This optional attribute is included to specify whether
* the device type is a virtual device or a physical device for the
* command/event. This attribute can be omitted for a virtual device (default)
* command/event.
* This u8 attribute is used to carry information for the device type using
* values defined by enum qca_vendor_oem_device_type.
*/
enum qca_wlan_vendor_attr_oem_data_params {
QCA_WLAN_VENDOR_ATTR_OEM_DATA_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA = 1,
QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_MAX =
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST - 1
};
/**
* enum qca_wlan_vendor_attr_avoid_frequency_ext - Defines attributes to be
* used with vendor command/event QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT.
*
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE: Required
* Nested attribute containing multiple ranges with following attributes:
* QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START and
* QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END.
*
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START: Required (u32)
* Starting center frequency in MHz.
*
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END: Required (u32)
* Ending center frequency in MHz.
*/
enum qca_wlan_vendor_attr_avoid_frequency_ext {
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE = 1,
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START = 2,
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END = 3,
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_MAX =
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST - 1
};
/*
* enum qca_wlan_vendor_attr_add_sta_node_params - Used by the vendor command
* QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE.
*/
enum qca_wlan_vendor_attr_add_sta_node_params {
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_INVALID = 0,
/* 6 byte MAC address of STA */
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_MAC_ADDR = 1,
/* Authentication algorithm used by the station of size u16;
* defined in enum nl80211_auth_type.
*/
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_AUTH_ALGO = 2,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_MAX =
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST - 1
};
/**
* enum qca_btc_chain_mode - Specifies BT coex chain mode.
* This enum defines the valid set of values of BT coex chain mode.
* These values are used by attribute %QCA_VENDOR_ATTR_BTC_CHAIN_MODE of
* %QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
*
* @QCA_BTC_CHAIN_SHARED: chains of BT and WLAN 2.4G are shared.
* @QCA_BTC_CHAIN_SEPARATED: chains of BT and WLAN 2.4G are separated.
*/
enum qca_btc_chain_mode {
QCA_BTC_CHAIN_SHARED = 0,
QCA_BTC_CHAIN_SEPARATED = 1,
};
/**
* enum qca_vendor_attr_btc_chain_mode - Specifies attributes for BT coex
* chain mode.
* Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
*
* @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE: u32 attribute.
* Indicates the BT coex chain mode, are 32-bit values from
* enum qca_btc_chain_mode. This attribute is mandatory.
*
* @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE_RESTART: flag attribute.
* If set, vdev should be restarted when BT coex chain mode is updated.
* This attribute is optional.
*/
enum qca_vendor_attr_btc_chain_mode {
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_INVALID = 0,
QCA_VENDOR_ATTR_BTC_CHAIN_MODE = 1,
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_RESTART = 2,
/* Keep last */
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST,
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_MAX =
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST - 1,
};
/**
* enum qca_vendor_wlan_sta_flags - Station feature flags
* Bits will be set to 1 if the corresponding features are enabled.
* @QCA_VENDOR_WLAN_STA_FLAG_AMPDU: AMPDU is enabled for the station
* @QCA_VENDOR_WLAN_STA_FLAG_TX_STBC: TX Space-time block coding is enabled
for the station
* @QCA_VENDOR_WLAN_STA_FLAG_RX_STBC: RX Space-time block coding is enabled
for the station
*/
enum qca_vendor_wlan_sta_flags {
QCA_VENDOR_WLAN_STA_FLAG_AMPDU = BIT(0),
QCA_VENDOR_WLAN_STA_FLAG_TX_STBC = BIT(1),
QCA_VENDOR_WLAN_STA_FLAG_RX_STBC = BIT(2),
};
/**
* enum qca_vendor_wlan_sta_guard_interval - Station guard interval
* @QCA_VENDOR_WLAN_STA_GI_800_NS: Legacy normal guard interval
* @QCA_VENDOR_WLAN_STA_GI_400_NS: Legacy short guard interval
* @QCA_VENDOR_WLAN_STA_GI_1600_NS: Guard interval used by HE
* @QCA_VENDOR_WLAN_STA_GI_3200_NS: Guard interval used by HE
*/
enum qca_vendor_wlan_sta_guard_interval {
QCA_VENDOR_WLAN_STA_GI_800_NS = 0,
QCA_VENDOR_WLAN_STA_GI_400_NS = 1,
QCA_VENDOR_WLAN_STA_GI_1600_NS = 2,
QCA_VENDOR_WLAN_STA_GI_3200_NS = 3,
};
/**
* enum qca_wlan_vendor_attr_get_sta_info - Defines attributes
* used by QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC:
* Required attribute in request for AP mode only, 6-byte MAC address,
* corresponding to the station's MAC address for which information is
* requested. For STA mode this is not required as the info always correspond
* to the self STA and the current/last association.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS:
* Optionally used in response, u32 attribute, contains a bitmap of different
* fields defined in enum qca_vendor_wlan_sta_flags, used in AP mode only.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL:
* Optionally used in response, u32 attribute, possible values are defined in
* enum qca_vendor_wlan_sta_guard_interval, used in AP mode only.
* Guard interval used by the station.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT:
* Optionally used in response, u32 attribute, used in AP mode only.
* Value indicates the number of data frames received from station with retry
* bit set to 1 in FC.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT:
* Optionally used in response, u32 attribute, used in AP mode only.
* Counter for number of data frames with broadcast or multicast address in
* the destination address received from the station.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED:
* Optionally used in response, u32 attribute, used in both STA and AP modes.
* Value indicates the number of data frames successfully transmitted only
* after retrying the packets and for which the TX status has been updated
* back to host from target.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED:
* Optionally used in response, u32 attribute, used in both STA and AP mode.
* Value indicates the number of data frames not transmitted successfully even
* after retrying the packets for the number of times equal to the total number
* of retries allowed for that packet and for which the TX status has been
* updated back to host from target.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL:
* Optionally used in response, u32 attribute, used in AP mode only.
* Counter in the target for the number of data frames successfully transmitted
* to the station.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY:
* Optionally used in response, u32 attribute, used in AP mode only.
* Value indicates the number of data frames successfully transmitted only
* after retrying the packets.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED:
* Optionally used in response, u32 attribute, used in both STA & AP mode.
* Value indicates the number of data frames not transmitted successfully even
* after retrying the packets for the number of times equal to the total number
* of retries allowed for that packet.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT: u32, used in
* the STA mode only. Represent the number of probe requests sent by the STA
* while attempting to roam on missing certain number of beacons from the
* connected AP. If queried in the disconnected state, this represents the
* count for the last connected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT: u32, used in
* the STA mode. Represent the number of probe responses received by the station
* while attempting to roam on missing certain number of beacons from the
* connected AP. When queried in the disconnected state, this represents the
* count when in last connected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT: u32, used in the
* STA mode only. Represents the total number of frames sent out by STA
* including Data, ACK, RTS, CTS, Control Management. This data is maintained
* only for the connect session. Represents the count of last connected session,
* when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT: u32, used in the STA mode.
* Total number of RTS sent out by the STA. This data is maintained per connect
* session. Represents the count of last connected session, when queried in the
* disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT: u32, used in the
* STA mode.Represent the number of RTS transmission failure that reach retry
* limit. This data is maintained per connect session. Represents the count of
* last connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT: u32, used in
* the STA mode. Represent the total number of non aggregated frames transmitted
* by the STA. This data is maintained per connect session. Represents the count
* of last connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT: u32, used in the
* STA mode. Represent the total number of aggregated frames transmitted by the
* STA. This data is maintained per connect session. Represents the count of
* last connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT: u32, used in
* the STA mode. Represents the number of received frames with a good PLCP. This
* data is maintained per connect session. Represents the count of last
* connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT: u32,
* used in the STA mode. Represents the number of occasions that no valid
* delimiter is detected by A-MPDU parser. This data is maintained per connect
* session. Represents the count of last connected session, when queried in the
* disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT: u32, used in the
* STA mode. Represents the number of frames for which CRC check failed in the
* MAC. This data is maintained per connect session. Represents the count of
* last connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT: u32, used in the
* STA mode. Represents the number of unicast ACKs received with good FCS. This
* data is maintained per connect session. Represents the count of last
* connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT: u32, used in the STA
* mode. Represents the number of received Block Acks. This data is maintained
* per connect session. Represents the count of last connected session, when
* queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT: u32, used in the STA
* mode. Represents the number of beacons received from the connected BSS. This
* data is maintained per connect session. Represents the count of last
* connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT: u32, used in the
* STA mode. Represents the number of beacons received by the other BSS when in
* connected state (through the probes done by the STA). This data is maintained
* per connect session. Represents the count of last connected session, when
* queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT: u64, used in
* the STA mode. Represents the number of received DATA frames with good FCS and
* matching Receiver Address when in connected state. This data is maintained
* per connect session. Represents the count of last connected session, when
* queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT: u32, used in the
* STA mode. Represents the number of RX Data multicast frames dropped by the HW
* when in the connected state. This data is maintained per connect session.
* Represents the count of last connected session, when queried in the
* disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS: u32, used in the
* STA mode. This represents the target power in dBm for the transmissions done
* to the AP in 2.4 GHz at 1 Mbps (DSSS) rate. This data is maintained per
* connect session. Represents the count of last connected session, when
* queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS: u32, used in the
* STA mode. This represents the Target power in dBm for transmissions done to
* the AP in 2.4 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect
* session. Represents the count of last connected session, when queried in the
* disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0: u32, used in the
* STA mode. This represents the Target power in dBm for transmissions done to
* the AP in 2.4 GHz at MCS0 rate. This data is maintained per connect session.
* Represents the count of last connected session, when queried in the
* disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS: u32, used in the
* STA mode. This represents the Target power in dBm for transmissions done to
* the AP in 5 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect
* session. Represents the count of last connected session, when queried in
* the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0: u32, used in the
* STA mode. This represents the Target power in dBm for for transmissions done
* to the AP in 5 GHz at MCS0 rate. This data is maintained per connect session.
* Represents the count of last connected session, when queried in the
* disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT: u32, used
* in the STA mode. This represents the Nested attribute representing the
* overflow counts of each receive buffer allocated to the hardware during the
* STA's connection. The number of hw buffers might vary for each WLAN
* solution and hence this attribute represents the nested array of all such
* HW buffer count. This data is maintained per connect session. Represents
* the count of last connected session, when queried in the disconnected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER: u32, Max TX power (dBm)
* allowed as per the regulatory requirements for the current or last connected
* session. Used in the STA mode.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER: u32, Latest TX power
* (dBm) used by the station in its latest unicast frame while communicating
* to the AP in the connected state. When queried in the disconnected state,
* this represents the TX power used by the STA with last AP communication
* when in connected state.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL: u32, Adaptive noise immunity
* level used to adjust the RX sensitivity. Represents the current ANI level
* when queried in the connected state. When queried in the disconnected
* state, this corresponds to the latest ANI level at the instance of
* disconnection.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES: Binary attribute containing
* the raw information elements from Beacon frames. Represents the Beacon frames
* of the current BSS in the connected state. When queried in the disconnected
* state, these IEs correspond to the last connected BSSID.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES: Binary attribute
* containing the raw information elements from Probe Response frames.
* Represents the Probe Response frames of the current BSS in the connected
* state. When queried in the disconnected state, these IEs correspond to the
* last connected BSSID.
*
* @QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON: u32, Driver
* disconnect reason for the last disconnection if the disconnection is
* triggered from the host driver. The values are referred from
* enum qca_disconnect_reason_codes.
*/
enum qca_wlan_vendor_attr_get_sta_info {
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC = 1,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS = 2,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL = 3,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT = 4,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT = 5,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED = 6,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED = 7,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL = 8,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY = 9,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED = 10,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT = 11,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT = 12,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT = 13,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT = 14,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT = 15,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT = 16,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT = 17,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT = 18,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT = 19,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT = 20,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT = 21,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT = 22,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT = 23,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT = 24,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT = 25,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT = 26,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS = 27,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS = 28,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0 = 29,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS = 30,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0 = 31,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT = 32,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER = 33,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER = 34,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL = 35,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES = 36,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES = 37,
QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON = 38,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST - 1,
};
/**
* enum qca_wlan_vendor_attr_update_sta_info - Defines attributes
* used by QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO vendor command.
*
* @QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS: Type is NLA_UNSPEC.
* Used in STA mode. This attribute represents the list of channel center
* frequencies in MHz (u32) the station has learnt during the last connection
* or roaming attempt. This information shall not signify the channels for
* an explicit scan request from the user space. Host drivers can update this
* information to the user space in both connected and disconnected state.
* In the disconnected state this information shall signify the channels
* scanned in the last connection/roam attempt that lead to the disconnection.
*/
enum qca_wlan_vendor_attr_update_sta_info {
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS = 1,
/* keep last */
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_MAX =
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST - 1,
};
/**
* enum qca_disconnect_reason_codes - Specifies driver disconnect reason codes.
* Used when the driver triggers the STA to disconnect from the AP.
*
* @QCA_DISCONNECT_REASON_UNSPECIFIED: The host driver triggered the
* disconnection with the AP due to unspecified reasons.
*
* @QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE: The host driver triggered the
* disconnection with the AP due to a roaming failure. This roaming is triggered
* internally (host driver/firmware).
*
* @QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE: The driver disconnected from
* the AP when the user/external triggered roaming fails.
*
* @QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE: This reason code is used
* by the host driver whenever gateway reachability failure is detected and the
* driver disconnects with AP.
*
* @QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA: The driver disconnected from
* the AP on a channel switch announcement from it with an unsupported channel.
*
* @QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR: On a concurrent AP start
* with indoor channels disabled and if the STA is connected on one of these
* disabled channels, the host driver disconnected the STA with this reason
* code.
*
* @QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED: Disconnection due to an
* explicit request from the user to disable the current operating channel.
*
* @QCA_DISCONNECT_REASON_DEVICE_RECOVERY: STA disconnected from the AP due to
* the internal host driver/firmware recovery.
*
* @QCA_DISCONNECT_REASON_KEY_TIMEOUT: The driver triggered the disconnection on
* a timeout for the key installations from the user space.
*
* @QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE: The dDriver disconnected the
* STA on a band change request from the user space to a different band from the
* current operation channel/band.
*
* @QCA_DISCONNECT_REASON_IFACE_DOWN: The STA disconnected from the AP on an
* interface down trigger from the user space.
*
* @QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL: The host driver disconnected the
* STA on getting continuous transmission failures for multiple Data frames.
*
* @QCA_DISCONNECT_REASON_PEER_INACTIVITY: The STA does a keep alive
* notification to the AP by transmitting NULL/G-ARP frames. This disconnection
* represents inactivity from AP on such transmissions.
* @QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT: This reason code is used on
* disconnection when SA Query times out (AP does not respond to SA Query).
*
* @QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE: The host driver disconnected the
* STA on missing the beacons continuously from the AP.
*
* @QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE: Disconnection due to STA not
* able to move to the channel mentioned by the AP in CSA.
*
* @QCA_DISCONNECT_REASON_USER_TRIGGERED: User triggered disconnection.
*/
enum qca_disconnect_reason_codes {
QCA_DISCONNECT_REASON_UNSPECIFIED = 0,
QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE = 1,
QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE = 2,
QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE = 3,
QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA = 4,
QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR = 5,
QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED = 6,
QCA_DISCONNECT_REASON_DEVICE_RECOVERY = 7,
QCA_DISCONNECT_REASON_KEY_TIMEOUT = 8,
QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE = 9,
QCA_DISCONNECT_REASON_IFACE_DOWN = 10,
QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL = 11,
QCA_DISCONNECT_REASON_PEER_INACTIVITY = 12,
QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT = 13,
QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE = 14,
QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE = 15,
QCA_DISCONNECT_REASON_USER_TRIGGERED = 16,
};
/**
* enum qca_wlan_vendor_attr_driver_disconnect_reason - Defines attributes
* used by %QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command.
*
* @QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE: u32 attribute.
* This attribute represents the driver specific reason codes (local
* driver/firmware initiated reasons for disconnection) defined
* in enum qca_disconnect_reason_codes.
*/
enum qca_wlan_vendor_attr_driver_disconnect_reason {
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE = 1,
/* keep last */
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_MAX =
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1,
};
#endif /* QCA_VENDOR_H */