tvl-depot/third_party/git/t/chainlint.sed
Vincent Ambo f4609b896f merge(3p/git): Merge git subtree at v2.29.2
This also bumps the stable nixpkgs to 20.09 as of 2020-11-21, because
there is some breakage in the git build related to the netrc
credentials helper which someone has taken care of in nixpkgs.

The stable channel is not used for anything other than git, so this
should be fine.

Change-Id: I3575a19dab09e1e9556cf8231d717de9890484fb
2020-11-21 19:45:56 +01:00

369 lines
10 KiB
Sed

#------------------------------------------------------------------------------
# Detect broken &&-chains in tests.
#
# At present, only &&-chains in subshells are examined by this linter;
# top-level &&-chains are instead checked directly by the test framework. Like
# the top-level &&-chain linter, the subshell linter (intentionally) does not
# check &&-chains within {...} blocks.
#
# Checking for &&-chain breakage is done line-by-line by pure textual
# inspection.
#
# Incomplete lines (those ending with "\") are stitched together with following
# lines to simplify processing, particularly of "one-liner" statements.
# Top-level here-docs are swallowed to avoid false positives within the
# here-doc body, although the statement to which the here-doc is attached is
# retained.
#
# Heuristics are used to detect end-of-subshell when the closing ")" is cuddled
# with the final subshell statement on the same line:
#
# (cd foo &&
# bar)
#
# in order to avoid misinterpreting the ")" in constructs such as "x=$(...)"
# and "case $x in *)" as ending the subshell.
#
# Lines missing a final "&&" are flagged with "?!AMP?!", and lines which chain
# commands with ";" internally rather than "&&" are flagged "?!SEMI?!". A line
# may be flagged for both violations.
#
# Detection of a missing &&-link in a multi-line subshell is complicated by the
# fact that the last statement before the closing ")" must not end with "&&".
# Since processing is line-by-line, it is not known whether a missing "&&" is
# legitimate or not until the _next_ line is seen. To accommodate this, within
# multi-line subshells, each line is stored in sed's "hold" area until after
# the next line is seen and processed. If the next line is a stand-alone ")",
# then a missing "&&" on the previous line is legitimate; otherwise a missing
# "&&" is a break in the &&-chain.
#
# (
# cd foo &&
# bar
# )
#
# In practical terms, when "bar" is encountered, it is flagged with "?!AMP?!",
# but when the stand-alone ")" line is seen which closes the subshell, the
# "?!AMP?!" violation is removed from the "bar" line (retrieved from the "hold"
# area) since the final statement of a subshell must not end with "&&". The
# final line of a subshell may still break the &&-chain by using ";" internally
# to chain commands together rather than "&&", so "?!SEMI?!" is never removed
# from a line (even though "?!AMP?!" might be).
#
# Care is taken to recognize the last _statement_ of a multi-line subshell, not
# necessarily the last textual _line_ within the subshell, since &&-chaining
# applies to statements, not to lines. Consequently, blank lines, comment
# lines, and here-docs are swallowed (but not the command to which the here-doc
# is attached), leaving the last statement in the "hold" area, not the last
# line, thus simplifying &&-link checking.
#
# The final statement before "done" in for- and while-loops, and before "elif",
# "else", and "fi" in if-then-else likewise must not end with "&&", thus
# receives similar treatment.
#
# Swallowing here-docs with arbitrary tags requires a bit of finesse. When a
# line such as "cat <<EOF >out" is seen, the here-doc tag is moved to the front
# of the line enclosed in angle brackets as a sentinel, giving "<EOF>cat >out".
# As each subsequent line is read, it is appended to the target line and a
# (whitespace-loose) back-reference match /^<(.*)>\n\1$/ is attempted to see if
# the content inside "<...>" matches the entirety of the newly-read line. For
# instance, if the next line read is "some data", when concatenated with the
# target line, it becomes "<EOF>cat >out\nsome data", and a match is attempted
# to see if "EOF" matches "some data". Since it doesn't, the next line is
# attempted. When a line consisting of only "EOF" (and possible whitespace) is
# encountered, it is appended to the target line giving "<EOF>cat >out\nEOF",
# in which case the "EOF" inside "<...>" does match the text following the
# newline, thus the closing here-doc tag has been found. The closing tag line
# and the "<...>" prefix on the target line are then discarded, leaving just
# the target line "cat >out".
#
# To facilitate regression testing (and manual debugging), a ">" annotation is
# applied to the line containing ")" which closes a subshell, ">>" to a line
# closing a nested subshell, and ">>>" to a line closing both at once. This
# makes it easy to detect whether the heuristics correctly identify
# end-of-subshell.
#------------------------------------------------------------------------------
# incomplete line -- slurp up next line
:squash
/\\$/ {
N
s/\\\n//
bsquash
}
# here-doc -- swallow it to avoid false hits within its body (but keep the
# command to which it was attached)
/<<[ ]*[-\\'"]*[A-Za-z0-9_]/ {
s/^\(.*\)<<[ ]*[-\\'"]*\([A-Za-z0-9_][A-Za-z0-9_]*\)['"]*/<\2>\1<</
s/[ ]*<<//
:hered
N
/^<\([^>]*\)>.*\n[ ]*\1[ ]*$/!{
s/\n.*$//
bhered
}
s/^<[^>]*>//
s/\n.*$//
}
# one-liner "(...) &&"
/^[ ]*!*[ ]*(..*)[ ]*&&[ ]*$/boneline
# same as above but without trailing "&&"
/^[ ]*!*[ ]*(..*)[ ]*$/boneline
# one-liner "(...) >x" (or "2>x" or "<x" or "|x" or "&"
/^[ ]*!*[ ]*(..*)[ ]*[0-9]*[<>|&]/boneline
# multi-line "(...\n...)"
/^[ ]*(/bsubsh
# innocuous line -- print it and advance to next line
b
# found one-liner "(...)" -- mark suspect if it uses ";" internally rather than
# "&&" (but not ";" in a string)
:oneline
/;/{
/"[^"]*;[^"]*"/!s/^/?!SEMI?!/
}
b
:subsh
# bare "(" line? -- stash for later printing
/^[ ]*([ ]*$/ {
h
bnextln
}
# "(..." line -- split off and stash "(", then process "..." as its own line
x
s/.*/(/
x
s/(//
bslurp
:nextln
N
s/.*\n//
:slurp
# incomplete line "...\"
/\\$/bicmplte
# multi-line quoted string "...\n..."?
/"/bdqstr
# multi-line quoted string '...\n...'? (but not contraction in string "it's")
/'/{
/"[^'"]*'[^'"]*"/!bsqstr
}
:folded
# here-doc -- swallow it
/<<[ ]*[-\\'"]*[A-Za-z0-9_]/bheredoc
# comment or empty line -- discard since final non-comment, non-empty line
# before closing ")", "done", "elsif", "else", or "fi" will need to be
# re-visited to drop "suspect" marking since final line of those constructs
# legitimately lacks "&&", so "suspect" mark must be removed
/^[ ]*#/bnextln
/^[ ]*$/bnextln
# in-line comment -- strip it (but not "#" in a string, Bash ${#...} array
# length, or Perforce "//depot/path#42" revision in filespec)
/[ ]#/{
/"[^"]*#[^"]*"/!s/[ ]#.*$//
}
# one-liner "case ... esac"
/^[ ]*case[ ]*..*esac/bchkchn
# multi-line "case ... esac"
/^[ ]*case[ ]..*[ ]in/bcase
# multi-line "for ... done" or "while ... done"
/^[ ]*for[ ]..*[ ]in/bcont
/^[ ]*while[ ]/bcont
/^[ ]*do[ ]/bcont
/^[ ]*do[ ]*$/bcont
/;[ ]*do/bcont
/^[ ]*done[ ]*&&[ ]*$/bdone
/^[ ]*done[ ]*$/bdone
/^[ ]*done[ ]*[<>|]/bdone
/^[ ]*done[ ]*)/bdone
/||[ ]*exit[ ]/bcont
/||[ ]*exit[ ]*$/bcont
# multi-line "if...elsif...else...fi"
/^[ ]*if[ ]/bcont
/^[ ]*then[ ]/bcont
/^[ ]*then[ ]*$/bcont
/;[ ]*then/bcont
/^[ ]*elif[ ]/belse
/^[ ]*elif[ ]*$/belse
/^[ ]*else[ ]/belse
/^[ ]*else[ ]*$/belse
/^[ ]*fi[ ]*&&[ ]*$/bdone
/^[ ]*fi[ ]*$/bdone
/^[ ]*fi[ ]*[<>|]/bdone
/^[ ]*fi[ ]*)/bdone
# nested one-liner "(...) &&"
/^[ ]*(.*)[ ]*&&[ ]*$/bchkchn
# nested one-liner "(...)"
/^[ ]*(.*)[ ]*$/bchkchn
# nested one-liner "(...) >x" (or "2>x" or "<x" or "|x")
/^[ ]*(.*)[ ]*[0-9]*[<>|]/bchkchn
# nested multi-line "(...\n...)"
/^[ ]*(/bnest
# multi-line "{...\n...}"
/^[ ]*{/bblock
# closing ")" on own line -- exit subshell
/^[ ]*)/bclssolo
# "$((...))" -- arithmetic expansion; not closing ")"
/\$(([^)][^)]*))[^)]*$/bchkchn
# "$(...)" -- command substitution; not closing ")"
/\$([^)][^)]*)[^)]*$/bchkchn
# multi-line "$(...\n...)" -- command substitution; treat as nested subshell
/\$([^)]*$/bnest
# "=(...)" -- Bash array assignment; not closing ")"
/=(/bchkchn
# closing "...) &&"
/)[ ]*&&[ ]*$/bclose
# closing "...)"
/)[ ]*$/bclose
# closing "...) >x" (or "2>x" or "<x" or "|x")
/)[ ]*[<>|]/bclose
:chkchn
# mark suspect if line uses ";" internally rather than "&&" (but not ";" in a
# string and not ";;" in one-liner "case...esac")
/;/{
/;;/!{
/"[^"]*;[^"]*"/!s/^/?!SEMI?!/
}
}
# line ends with pipe "...|" -- valid; not missing "&&"
/|[ ]*$/bcont
# missing end-of-line "&&" -- mark suspect
/&&[ ]*$/!s/^/?!AMP?!/
:cont
# retrieve and print previous line
x
n
bslurp
# found incomplete line "...\" -- slurp up next line
:icmplte
N
s/\\\n//
bslurp
# check for multi-line double-quoted string "...\n..." -- fold to one line
:dqstr
# remove all quote pairs
s/"\([^"]*\)"/@!\1@!/g
# done if no dangling quote
/"/!bdqdone
# otherwise, slurp next line and try again
N
s/\n//
bdqstr
:dqdone
s/@!/"/g
bfolded
# check for multi-line single-quoted string '...\n...' -- fold to one line
:sqstr
# remove all quote pairs
s/'\([^']*\)'/@!\1@!/g
# done if no dangling quote
/'/!bsqdone
# otherwise, slurp next line and try again
N
s/\n//
bsqstr
:sqdone
s/@!/'/g
bfolded
# found here-doc -- swallow it to avoid false hits within its body (but keep
# the command to which it was attached)
:heredoc
s/^\(.*\)<<[ ]*[-\\'"]*\([A-Za-z0-9_][A-Za-z0-9_]*\)['"]*/<\2>\1<</
s/[ ]*<<//
:hdocsub
N
/^<\([^>]*\)>.*\n[ ]*\1[ ]*$/!{
s/\n.*$//
bhdocsub
}
s/^<[^>]*>//
s/\n.*$//
bfolded
# found "case ... in" -- pass through untouched
:case
x
n
/^[ ]*esac/bslurp
bcase
# found "else" or "elif" -- drop "suspect" from final line before "else" since
# that line legitimately lacks "&&"
:else
x
s/?!AMP?!//
x
bcont
# found "done" closing for-loop or while-loop, or "fi" closing if-then -- drop
# "suspect" from final contained line since that line legitimately lacks "&&"
:done
x
s/?!AMP?!//
x
# is 'done' or 'fi' cuddled with ")" to close subshell?
/done.*)/bclose
/fi.*)/bclose
bchkchn
# found nested multi-line "(...\n...)" -- pass through untouched
:nest
x
:nstslrp
n
# closing ")" on own line -- stop nested slurp
/^[ ]*)/bnstcl
# comment -- not closing ")" if in comment
/^[ ]*#/bnstcnt
# "$((...))" -- arithmetic expansion; not closing ")"
/\$(([^)][^)]*))[^)]*$/bnstcnt
# "$(...)" -- command substitution; not closing ")"
/\$([^)][^)]*)[^)]*$/bnstcnt
# closing "...)" -- stop nested slurp
/)/bnstcl
:nstcnt
x
bnstslrp
:nstcl
s/^/>>/
# is it "))" which closes nested and parent subshells?
/)[ ]*)/bslurp
bchkchn
# found multi-line "{...\n...}" block -- pass through untouched
:block
x
n
# closing "}" -- stop block slurp
/}/bchkchn
bblock
# found closing ")" on own line -- drop "suspect" from final line of subshell
# since that line legitimately lacks "&&" and exit subshell loop
:clssolo
x
s/?!AMP?!//
p
x
s/^/>/
b
# found closing "...)" -- exit subshell loop
:close
x
p
x
s/^/>/
b