tvl-depot/tests
Shea Levy 18fefacf7d Dynamic attrs
This adds new syntax for attribute names:

* attrs."${name}" => getAttr name attrs
* attrs ? "${name}" => isAttrs attrs && hasAttr attrs name
* attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def
* { "${name}" = value; } => listToAttrs [{ inherit name value; }]

Of course, it's a bit more complicated than that. The attribute chains
can be arbitrarily long and contain combinations of static and dynamic
parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively
straightforward for the getAttrs/hasAttrs cases but is more complex for
the listToAttrs case due to rules about duplicate attribute definitions.

For attribute sets with dynamic attribute names, duplicate static
attributes are detected at parse time while duplicate dynamic attributes
are detected when the attribute set is forced. So, for example, { a =
null; a.b = null; "${"c"}" = true; } will be a parse-time error, while
{ a = {}; "${"a"}".b = null; c = true; } will be an eval-time error
(technically that case could theoretically be detected at parse time,
but the general case would require full evaluation). Moreover, duplicate
dynamic attributes are not allowed even in cases where they would be
with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but {
a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction
might be relaxed in the future in cases where the static variant would
not be an error, but it is not obvious that that is desirable.

Finally, recursive attribute sets with dynamic attributes have the
static attributes in scope but not the dynamic ones. So rec { a = true;
"${"b"}" = a; } is equivalent to { a = true; b = true; } but rec {
"${"a"}" = true; b = a; } would be an error or use a from the
surrounding scope if it exists.

Note that the getAttr, getAttr or default, and hasAttr are all
implemented purely in the parser as syntactic sugar, while attribute
sets with dynamic attribute names required changes to the AST to be
implemented cleanly.

This is an alternative solution to and closes #167

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 20:59:49 +00:00
..
lang Dynamic attrs 2013-12-31 20:59:49 +00:00
add.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
binary-cache.sh Add support for uncompressed NARs in binary caches 2013-07-01 21:03:14 +02:00
binary-patching.nix * Urgh, FreeBSD doesn't have a "seq" command. 2011-02-09 14:03:16 +00:00
binary-patching.sh nix-push: Support generating a manifest again 2012-07-26 18:28:12 -04:00
build-hook.hook.sh * Made the build hook mechanism more efficient. Rather than starting 2010-08-25 20:44:28 +00:00
build-hook.nix Fix test 2013-10-17 11:18:37 +02:00
build-hook.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
check-refs.nix * Refactoring: renamed *.nix.in to *.nix. 2009-03-17 17:11:55 +00:00
check-refs.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
common.sh.in Urgggh 2013-01-02 23:52:15 +01:00
config.nix.in * Add a test for nix-channel. 2012-01-03 01:51:38 +00:00
dependencies.builder0.sh Test string semantics a bit more 2013-10-17 01:12:43 +02:00
dependencies.builder1.sh * Purify `make check'. 2006-07-21 13:21:43 +00:00
dependencies.builder2.sh * Purify `make check'. 2006-07-21 13:21:43 +00:00
dependencies.nix Test string semantics a bit more 2013-10-17 01:12:43 +02:00
dependencies.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
export-graph.nix Support quoted attribute names in -A 2013-11-18 10:21:12 +00:00
export-graph.sh Support quoted attribute names in -A 2013-11-18 10:21:12 +00:00
export.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
fallback.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
fetchurl.nix Add a test for the fetchurl function 2012-07-09 15:41:43 -04:00
fetchurl.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
filter-source.nix * Refactoring: renamed *.nix.in to *.nix. 2009-03-17 17:11:55 +00:00
filter-source.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
fixed.builder1.sh * Test the impureEnvVars feature. 2007-09-11 13:32:04 +00:00
fixed.builder2.sh * Test case to show that parallel builds of different fixed-output 2007-08-28 09:21:47 +00:00
fixed.nix * Refactoring: renamed *.nix.in to *.nix. 2009-03-17 17:11:55 +00:00
fixed.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
gc-concurrent.builder.sh * Increase the sleep periods a bit to make the test less likely to 2008-08-14 09:26:30 +00:00
gc-concurrent.nix * Refactoring: renamed *.nix.in to *.nix. 2009-03-17 17:11:55 +00:00
gc-concurrent.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
gc-concurrent2.builder.sh * Increase the sleep periods a bit to make the test less likely to 2008-08-14 09:26:30 +00:00
gc-runtime.nix * Refactoring: renamed *.nix.in to *.nix. 2009-03-17 17:11:55 +00:00
gc-runtime.sh Replace "make check" with "make installcheck" 2012-03-19 01:20:02 +01:00
gc.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
hash-check.nix * Purify `make check'. 2006-07-21 13:21:43 +00:00
hash.sh Replace "make check" with "make installcheck" 2012-03-19 01:20:02 +01:00
import-derivation.nix * Add a test for importing derivations. 2012-01-26 13:04:50 +00:00
import-derivation.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
init.sh Replace "make check" with "make installcheck" 2012-03-19 01:20:02 +01:00
install-package.sh nix-push: Support generating a manifest again 2012-07-26 18:28:12 -04:00
lang.sh Test the delayed with a bit more 2013-07-31 13:12:35 +02:00
logging.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
Makefile.am Urgggh 2013-01-02 23:52:15 +01:00
misc.sh Fix the test 2012-10-03 18:01:35 -04:00
multiple-outputs.nix Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
multiple-outputs.sh Fix the multiple-outputs test 2012-11-26 17:46:45 +01:00
negative-caching.nix * Negative caching, i.e. caching of build failures. Disabled by 2009-03-25 21:05:42 +00:00
negative-caching.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
nix-build.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
nix-channel.sh nix-push: Support generating a manifest again 2012-07-26 18:28:12 -04:00
nix-copy-closure.nix Adjust to the NixOS/Nixpkgs merge 2013-10-11 10:57:23 +02:00
nix-profile.sh Urgggh 2013-01-02 23:52:15 +01:00
nix-pull.sh Fix test failure on Darwin 2012-09-12 11:29:10 -04:00
nix-push.sh nix-push: Support generating a manifest again 2012-07-26 18:28:12 -04:00
optimise-store.sh Fix the store optimisation test 2012-09-13 12:54:23 -04:00
parallel.builder.sh * Make this test a bit more robust. It's still timing dependent 2009-03-23 15:16:36 +00:00
parallel.nix * Make this test a bit more robust. It's still timing dependent 2009-03-23 15:16:36 +00:00
parallel.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
referrers.sh Use "set -x" in the tests to see where a test fails 2012-07-27 14:33:01 -04:00
remote-builds.nix Adjust to the NixOS/Nixpkgs merge 2013-10-11 10:57:23 +02:00
remote-store.sh Drop support for running nix-worker in "slave" mode 2012-10-03 17:30:45 -04:00
secure-drv-outputs.nix * On FreeBSD, ‘touch’ is not in the test $PATH, so don't use it. 2011-08-08 14:08:38 +00:00
secure-drv-outputs.sh Don't put results symlinks in the tests directory 2012-09-11 19:14:15 -04:00
simple.builder.sh * Fix the tests. 2007-08-13 13:15:02 +00:00
simple.nix * Refactoring: renamed *.nix.in to *.nix. 2009-03-17 17:11:55 +00:00
simple.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
substituter.sh Don't keep "disabled" substituters running 2013-06-20 11:55:15 +02:00
substituter2.sh Don't keep "disabled" substituters running 2013-06-20 11:55:15 +02:00
substitutes.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
substitutes2.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00
timeout.builder.sh Adda test for build-max-log-size 2013-09-02 12:44:30 +02:00
timeout.nix Show that --timeout doesn't work if the build produces log output 2013-04-23 17:16:29 +02:00
timeout.sh Adda test for build-max-log-size 2013-09-02 12:44:30 +02:00
user-envs.builder.sh Test priorities 2012-12-04 14:47:50 +01:00
user-envs.nix Test priorities 2012-12-04 14:47:50 +01:00
user-envs.sh Test priorities 2012-12-04 14:47:50 +01:00
verify.sh * Refactoring: remove unnecessary variables from the tests. 2011-10-10 21:32:34 +00:00