This removes everything related to workspaces, as well as the current
RandR configuration, creating a (cleaner) slate for switching to tabs.
This was supposed to be committed earlier, but got broken by
clbot (see b/333).
Change-Id: I2d110bca0d6629a505699210f0aba12882f83d48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10115
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Sets up tab-bar-mode for EXWM, and adds simple initial configuration
and shortcuts to make it behave sanely. I had to assign tab switching
shortcuts myself, as the EXWM input key stuff doesn't work correctly
with the built-in way of setting these shortcuts in tab-bar-mode.
Change-Id: Icd96f03ae7bd2bd5f7c2d59f9aca7a1ca2e7f788
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10116
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Adds an `exwm-assign-workspaces` function that automatically creates
and assigns workspaces to each currently connected monitor. The first
workspace (index 0) is always on the primary monitor.
This function should be idempotent and can be called at any point to
synchronise X outputs and what EXWM is displaying on them.
This works because tabs are disconnected from workspaces completely,
so I don't have to care about what's going on on other workspaces
anymore.
Still missing:
* functions to connect/disconnect outputs
* switching to other outputs from within emacs commands (i.e. without
the mouse)
Change-Id: I7c24aa1b45218fe35de6939e799852b5d11d1272
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This one is a bit stupid because I couldn't figure out a way to
determine the active workspace. It's definitely possible (either
through some XCB calls, or through state management in screen change
hooks), but for now this is fine.
Change-Id: I5e4c531b248caa0021664bad9dc196bef60cfbac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10122
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
By default, this will be the (only) remaining monitor. In N>2
situations, ask the user.
Change-Id: Id68fcf60d56d0414d1072b8ffeef72c608678f52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10121
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Uses a bunch of weird xrandr invocations and completing reads to
configure screens the way I want.
Note that this has a known bug where disconnecting a primary screen
will *not* make one of the remaining screens primary.
Change-Id: Ide5322df446685cc4740d4ddd7b6ca8682375050
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10120
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Something changed in the machinery and broke the overriding. I didn't
notice this, as a I was temporarily using an unpatched EXWM.
Change-Id: I1a4e8ea63bd116d86a430e680c2b631474e9a0fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10047
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This was previously only in my Telegram channel, but it might as well
be on the blog itself.
Change-Id: I301ebeaa4dd1875f3858cee5259a5c689b950790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10009
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This can apparently work around some of the CPU throttling bugs on
~modern~ computers.
Change-Id: I807ece85d3eba53857a1cb1e73a33f7924538e96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9895
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
nixpkgs changed something in how it deals with configuration of the
package set itself when that is externally instantiated (like in
depot)
It seems like we can work around this mostly by just ... deleting some
code, as all instances of this were for allowing unfree code, which
we've already set on the top-level anyways.
* //users/sterni: fix nixpkgs config assertion to point at
pkgs.config
* //users/wpcarro: disable locate service, which is broken in nixpkgs
Change-Id: Iacf6f1c8fd5b5289e7265e155d74f8269a858ceb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9541
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Without this line, accessing external APIs from Gonic (e.g. scrobbling
to Listenbrainz) does not work (unless a local resolver exists). This
is because in the pure Go DNS implementation used in gonic, only
/etc/resolv.conf can provide resolvers.
Change-Id: I26dd9a845b0a70c4cfb983c68da2b76b7e57dfec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9502
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* zramSwap: during reindexing, geesefs can be pushed to the boundaries
of what the new overaggressive OOM killer accepts, and I don't want
to bother configuring that thing instead.
* umount: geesefs dying unexpectedly leaves broken mounts around,
clean these up before proceeding
This bakes in the assumption that there's only ever one geesefs
service, but that assumption is baked in anyways.
Change-Id: Id85c2f5bc2312a7246ea20229eb36d2cc1bd82c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9500
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... this will make sense soon!
Change-Id: I1f8f32d655afdf868fff4bd09e1fea2943fd7558
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9496
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Can't be bothered to make something more automated for now.
Change-Id: Ie245af90c1a62a5988b97d16f86b6567e1ffafd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9493
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Telega tries to use some random completing-read functions, but I just
want it to use the default one, which I've configured the way I want.
Change-Id: I33da24f257e8ac0cae4a7d25ba6c5e4e656fcad5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9478
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Some of these I don't use, some of these have been replaced with
tree-sitter, some of these have moved into core.
Change-Id: Id0a8aac4189607a89db861bbc09b95c75c45dc0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9310
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The mechanism in nixpkgs does not work, but doing it myself is not
that difficult.
Change-Id: I91b12e9c1f5d381c9990fd46e02169f5275f88da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9309
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially interested in the C++ mode, as I am regularly dealing with
extremely large C++ files where the existing mode is having trouble.
Change-Id: I8c17a35011a23b67043de5de58c4269c636de68b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9308
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I want to experiment with the new tree-sitter modes in Emacs, maybe
they're good.
Change-Id: I706fc8a889fcfa61d0f11d50ecbc67a2899b5bbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9307
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Also expose both formats, then use it from
users/tazjin/presentations/tvix-eval-2023.
Change-Id: Id906e8aff5510a7a4f33336326472e86db18ea32
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9280
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Makes it possible for people in the audience to get to the link
collection reasonably quickly.
Later on that post can also have the talk itself added. For now it is
unlisted.
Change-Id: If9ae1d88d3c6f22bbd70b2b3cbea0b0d42895a93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9208
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Tested-by: BuildkiteCI
This demonstrates a Rust stdlib call that just causes runtime panics
on WASM, for explaining the problems with porting Tvixbolt.
Change-Id: Ief974f1bba509fdac4b9bc9f862ee8f4dfc5158e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9206
Tested-by: BuildkiteCI
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Autosubmit: tazjin <tazjin@tvl.su>
refine doesn't work anymore, inspector seems to be a more modern
alternative.
it's impressive that they managed to write elisp code that broke.
Change-Id: I672de68abdc3d780f66769043afefd8d37438548
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9209
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I spent way too much time fighting LaTeX to do roughly what I want
here again, but all the alternatives are even worse.
Change-Id: Ibe12a4ce175ceb73e9d6e276613dcd4827dd76c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9150
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Tested-by: BuildkiteCI
This gives me the ability to override the Emacs per-machine easily.
Change-Id: Id480889c108833b0a11c377a9b1e946900c5aba1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9166
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I only wrote this as a hack to make my Emacs config run on gLinux, but
that isn't relevant anymore.
Change-Id: I19c49d500e0ec75bb85644d25a63b0b6c530aa62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9165
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of staying up-to-date with Emacs master, I'd like to be a bit
more laid back and stay with stable releases. Now that native
compilation is in this is not a big difference.
I tried to use `-pgtk`, but it broke EXWM.
Change-Id: I0789a1f73d0149bda912987e726de396545abce1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9164
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of producing a binary that gets called by Emacs, with
input/output serialisation, use a dynamic Emacs module that lets Emacs
more-or-less directly call the relevant GTK functions.
I'm doing this mostly as an experiment. Might be interesting to end up
with a dynamic module that I can dump some experimental code into that
improves my workflows.
To do this, I've exposed the emacs binary used by my Emacs
configuration in an additional `passthru` field. This ensures that the
module is linked against the right version of Emacs.
Change-Id: I1426994fe3455ed1b2a685c5a09705e29fa40950
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9163
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
This built-in emacs library actually provides a data structure that
can work as an LRU list through the existing helper function to move
an element to the front of the ring if it already exists.
As a result, the code for workspace history moving becomes a lot less
brittle and complicated than it was before. No more carefully figuring
out when to modify state, just push it in the ring unless it's being
rotated already.
Change-Id: If354e0618fc5a6d7333776468eec077596cfe9df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9162
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I haven't used that since ... 2018 or so, time for it to go.
Change-Id: I5e1b729bd553940b98335e3d9c7ca5b134fdf692
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9161
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This does nothing other than dump out the list of XDG apps to stdout
in JSON format. There are no options or anything.
This can be used for selection in app launchers (e.g. dmenu, something
based on completing-read in emacs, rofi, etc.).
I wrote this because I don't want to deal with having to do this in
Elisp. It's also unclear what logic actually hides behind under the
hood here, so why not just use the official library.
Change-Id: I16fed2c92760cadecc02c59a4e537a1fa247aff9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9157
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
vertico and consult are more modern versions of interactive narrowing
helpers, as those implemented by ivy and its related packages.
The primary differences (and what I care about here) is that they are
more focused on integration with the core Emacs primitives, rather
than building an ecosystem around them.
For example:
* vertico enhances `completing-read' and friends, but does not attempt
to provide its own ecosystem of functions to *trigger* completions.
* vertico integrates with the default `completion-style' system,
meaning that I can continue to use things like prescient without
extra packages that integrate it with vertico
* consult does not rely on vertico or any other specific completion
framework (such as counsel/swiper do with ivy), and simply
implements its functions using completing-read
This reduces the overall amount of code in the dependency closure and
leads to a less special setup.
Functionality is basically equivalent, except for two things which
counsel came with that I will need to substitute:
* counsel-notmuch (actually this was a separate package, but I didn't
use it much anyways, so just ignoring it for now)
* counsel-linux-app (opening desktop shortcuts, this I will need to make)
As a side note, consult notes "This package is a part of GNU Emacs",
but it doesn't seem to be the case.
Change-Id: Ia046b763bf3d401b505e0f6393cfe1ccd6f41293
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9155
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
When entering an incorrect GPG key password, I don't want my whole
buffer layout ruined. A small error message in the modeline is enough.
Change-Id: I7318d685e74fa4e110a9bff30d0de9f7f18b2be4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9149
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially the recursive minibuffers only cause a mess.
Change-Id: I6f7f790acd6a2f8cc4cec26c9cf97d5e53e77106
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9148
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Adds a completing-read function (defaulting to ivy for me, but it
doesn't matter) that offers a reliable alternative to standard
buffer-switching implementations.
In particular, this implementation retains a mapping of
buffer names to their buffer *objects*, so that the correct buffer is
selected even if some renaming took place during the selection.
I tried to account for a bunch of the common behaviours I could think
of:
* invisible buffers are ... invisible
* entering a buffer name manually creates that buffer, if there is no
match
* ... unless that buffer is an invisible buffer, in which case it is
selected and switched to
* the first element is always `(other-buffer (current-buffer))`,
because of the ordering of #'buffer-list
Yet, the entire code of my implementation is less than the *setup*
code of ivy-switch-buffers, so it's possible I missed something. Well,
I'll find out ...
Change-Id: I08be0da0863d06c9a930e5efaf916719655db90e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9147
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This allows pinning the name of the sparse tree derivation, which
stops the continous rebuilding of tvix-store-proto dependents.
I've opted to let the function take an attribute set instead and
refactored the call sites appropriately.
Change-Id: I3e57785094b1adbfffa24caf9f1c3384844fa200
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8965
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The `a` shortcut of telega makes it dangerously easy to accidentally
add users whose username starts with `a` to a group.
This unbinds the shortcut, and leaves the member-adding function to be
called manually and explicitly only.
Change-Id: Iedb6291f16a299fc5d4ef824a1be6eb0a449001f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9015
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Work projects are not in git, but I still want to fuzzy jump to them.
Change-Id: Iced78519da69b6992d253e2a0c9ed485f1347164
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9005
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Gonna try to use this not for what it's intended ))
Change-Id: I669422323197cd4dc3812af399f17ed429871108
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9002
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I keep setting this manually to launch Java applications, might as
well just set it system-wide.
Change-Id: I3a3477cd4364b4c170b98320e2cab1359dd399fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8982
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
It does the emoji completion, very important!
Change-Id: I1160e2cf0415b2a4e2b6ebc194cd643a2b18793e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8966
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
the ecdsa-cert key is not welcomed by many ssh setups ...
Change-Id: Ic1bc583105226324a9c3ff26924eb2faa38f10fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8912
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
The images displayed by telega are usually not displaying correctly,
this is fixed by simply .. not rendering them, and letting emacs do it
through an emoji-supporting font (which I do have installed).
Change-Id: I429ff2865c60633329437687c1c09a1aaf8ae29d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8884
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* //3p/sources: switch stable channel from 21.11 (!) to 23.05
* //users: adapt to emacsUnstable to emacs-unstable rename
* //users/grfn: use default Linux kernel version everywhere,
as 5.15 has broken in this version of nixos-unstable.
* //3p/cgit: adapt to git 2.41.0
The committed changes are the same as the [patch1] I've submitted
to cgit-pink which is in turn based on Christian Hesse's [patch2].
patch1: https://causal.agency/list/thread/20230624144033.802270-1-sternenseemann%40systemli.org.html#20230624144033.802270-2-sternenseemann@systemli.org>
patch2: https://lists.zx2c4.com/pipermail/cgit/2023-June/004843.html
Co-authored-by: Christian Hesse <mail@eworm.de>
Change-Id: I549a62e7c85c66d772edda997819a40f2d5835d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8855
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: grfn <grfn@gws.fyi>
This runs a headscale server on sanduny which lets users join their
machines to the TVL tailscale network.
This would theoretically let people communicate with each other on the
internal network, but also more notably joined servers can advertise
exit node capability so that we can have our own "VPN network", for
starters with endpoints in Germany, UK and Russia (whitby, sanduny and
koptevo respectively).
This setup isn't fully stable yet, notably:
* The IP range used by tailscale is just the default one right now,
I'm not sure if that should be changed or what.
* The system is stateful (on sanduny), but the state is not (yet)
backed up anywhere. Use with caution.
* Machine joining is a manual process requiring SSH & root access to
sanduny.
The process is to log in to sanduny, then get a headscale shell with
`sudo -u headscale bash`, and to use the `headscale` CLI within
there to administrate access.
I've opted to create a user account `tvl` for TVL-owned machines,
and a personal account for myself and my machines.
Change-Id: I4f1be1fe8062a6c2e77203ff72fe8709f4e4dec8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8837
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This machine is now being decomissioned.
Change-Id: Ib7f016c7de84dab2cdf3c071445cf830d2eccf5f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8838
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The main instance is still running on polyanka, but things are moving
in this direction.
Change-Id: Idfa9e508023c05148003ac4621ae01dceb284c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8827
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The GPT backend is cool, but it's also very slow, prone to request
errors and quite expensive.
This switches to Yandex Translate instead which for all posts that I
tested seems to be totally fine.
Change-Id: I5217113995b701508a83e7782eb1325957996719
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8826
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The entry list is now much more condensed. It's maybe a little *too*
condensed, but already closer to what I'm looking for.
Note: A new "note" post type has snuck in and can now be used for
random musings or comments on previous entries. Notes do not show up
in the Atom feed.
Change-Id: I920c0c7650937474b8a5f30cba78416554d523ce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8806
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is the "new polyanka" (eventually), as I'm decommissioning that
host slowly.
Change-Id: Ia0fe664f3bf64513d8177434c6c0fface857cd99
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8783
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
* //ops/modules/depot-inbox: Adapt to upstream option type declaration.
See nixpkgs commit b6ed3b8f402893df91a8e21ce993520301c2f076.
* //ops/machines/sanduny, //users/tazjin/polyanka:
Remove boot.loader.grub.version options (no longer has any effect).
* //users/sterni/emacs: reflect rename emacsPgtk -> emacs-pgtk
* //3p/overlays: update tdlib to match emacs-overlay
* //3p/overlays: give EXWM from depot a separate name
* //users/grfn/system/home: disable Slack support in ntfy
Change-Id: I03bde088bc70e05b23925f244899807210cb7b20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8547
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I don't actually use this, and it might be responsible for some EXWM
bugs in the latest version.
Change-Id: I8817e0cdd9d1b68ed6a9bdd072616f63f9f20d21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8758
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
reddit is dying now, but the response there was actually quite
interesting, so I'm keeping an archive link to it around.
Change-Id: I419276428ce141fc526124d9746e3ab13df4bbc8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8756
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this is slow and often overloaded, but it's kind of cool when it
works. this translation method deals much better with the kind of
slang you'd see in telegram posts than any other method.
Change-Id: I7e4c845eb382f0eac627c4237b492c8e40dae574
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8625
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Something in recent nixpkgs made things a little ... less bold. This
makes them more bold again. It looks vaguely correct after.
Change-Id: I6fc60cc1ec2d21d193f46f4d80998f041941add0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8488
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Tailscale just works better out of the box than Zerotier, and its
clients aren't unfree.
Change-Id: Ie35ef1adde0edbe923992b02e6b636269a96a81e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8482
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
some telegram channels do not allow embedding of messages, but do
allow a preview to be shown on twitter. this preview is just embedded
in the html, and can be scraped out if no message was found.
technically this preview also contains image links, but they are to
very low resolution, thumbnail-style images so i decided not to
include them here.
Change-Id: Ifb89f9fbde8140d577a5ee3af6e60b04232e53e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8480
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
we don't need these and they add a bunch of unnecessary deps.
Change-Id: I88a30ec8443090a2c61934b35848bea6f1d9597a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8479
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
* Satisfy new assert that the corresponding shell needs to be enabled
via programs.* if it is as the login shell of at least one user.
* //users/tazjin: “Address” removal of hardware.video.hidpi option.
* //3p/gerrit: update fetch sha256
Change-Id: Id0988a0ea7f393d6b7848a7104fc3526ee1177f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8407
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
One normal chromium is enough. google-chrome is not needed because
Chromecasts usually don't work anymore anyways.
Change-Id: I48bed05c56bd6f450be393cf727930eaad5cd6b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8231
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
This is an experiment for tvix-eval.
Change-Id: Ic752b5b125cefefeb1343e38a70beb364478e6eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8131
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This seems to have been turned on in ~November/December 2022, and is
wreaking havoc on my system usability as it keeps killing my X session
as soon as any kind of load happens on the system.
This can be as little as accidentally playing two YouTube videos (as
each YouTube tab can take 3-5GiB of RAM), or trying to process a
dataset locally.
I'm not sure if this is the culprit, but it sure seems like it.
Change-Id: Id742b4506262cc362c9fd3f2575aea23e5c092a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7858
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
This is currently hosted by the company, and I'm assigning my
copyright to the company, which also runs an ad placement on the page.
Note that the NixOS module for hosting it has not been moved yet.
Change-Id: Iba9e1cab9370faa79e43c3344fbfbbbabead50b3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7857
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This isn't just a наречие, it also functions as a предлог.
Change-Id: Id2e2ccbe0a8b7f73739289d531b6d1fda81bed2d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7799
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Quassel sometimes thinks it's a reasonable thing to do to start
firefox instead of my default browser. Why? I've got no clue.
But since I don't use Firefox anyways unless there's a special
situation going on, lets just delete it.
Change-Id: Ib7ad4cc53c44ac47f3a0c3922600c3915f90219c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7646
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this way I can at least claim to not have completely ignored it this
year :p
Change-Id: I59ab58a05e6bc217e9c6d9fa830d321ddff71d8a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7608
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I don't currently need these for any client work but they're constant
battery drains.
Change-Id: Id45d4dacfd59cb3d18d79311fa29450d14a33e6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7454
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
it annoys me and I've been turning it off manually, which is also annoying
Change-Id: Ia3b79d11068757c0bb9ee5543a376effb98506df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7441
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I often have to type text in German, but on the German keyboard layout
'Y' and 'Z' are in the wrong place (why? who knows). To avoid this
confusion, this defines an input method with the positions of those
keys corrected.
Change-Id: Ie446329d151cd3ed2bbeae1a34fc82d3c29f1d12
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7440
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
It's impossible to log into many public wifi networks otherwise when
the login depends on DNS hijacking.
Change-Id: I09f8b504810eebeb788997d2100a6db4777a8725
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7307
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
The DNS server on the network of this boat refuses to deliver *any*
results to my laptop, only to my phone, so I had to do some trickery
to figure out the address of the WiFi login portal.
Change-Id: I7934c570be79d6191feb999e6860428623cfd88f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7168
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
* //users/grfn/system/home/modules:
The MultiMC saga continues with:
> PolyMC has been removed from nixpkgs due to a hostile takeover
> by a rogue maintainer. The rest of the maintainers have made a
> fork which is packaged as 'prismlauncher'.
* //third_party/overlays:
Override tdlib to 1.8.7 while waiting for nixpkgs to catch up.
* //users/tazjin/finito:
Disable on CI temporarily as it has been broken by some change
in nixpkgs, now failing to compile a dependency.
Change-Id: Ide038a8d466bfdc19dc9016beb03ae4817939a2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7066
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of waiting for nixpkgs to [update home-manager], we can track
the upstream repository directly (using master as a channel seems to
be common practice) and overlay the up to date source into our nixpkgs
instance.
For //users/tazjin/home and //users/wpcarro/nixos/marcus, we need to
set `home.stateVersion`, since the default value for this option was
removed some time this summer.
[update home-manager]: https://github.com/NixOS/nixpkgs/issues/197907
Change-Id: I8c153fb7d3b55a4040652a5d619761b640119105
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7098
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
frog is defunct for now, unihertz phone is replaced with palm (on
which I don't run SSH), and for b/210 I'd like a non-sk key on zamalek
Change-Id: Ie99e650dcf9deef91a0f63d4171a332a8e596de0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6950
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This option actually doesn't change behaviour in xss-lock, which I'm
using instead of xautolock, so this is a no-op.
Relates to b/200
Change-Id: Ia5b155bf80fcd092038ed2c95517e64d562d0219
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6840
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Upstream nixpkgs removed a lot of aliases this time, so we needed to do
the following transformations. It's a real shame that aliases only
really become discoverable easily when they are removed.
* runCommandNoCC -> runCommand
* gmailieer -> lieer
We also need to work around the fact that home-manager hasn't catched
on to this rename.
* mysql -> mariadb
* pkgconfig -> pkg-config
This also affects our Nix fork which needs to be bumped.
* prometheus_client -> prometheus-client
* rxvt_unicode -> rxvt-unicode-unwrapped
* nix-review -> nixpkgs-review
* oauth2_proxy -> oauth2-proxy
Additionally, some Go-related builders decided to drop support for
passing the sha256 hash in directly, so we need to use the generic hash
arguments.
Change-Id: I84aaa225ef18962937f8616a9ff064822f0d5dc3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6792
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: wpcarro <wpcarro@gmail.com>
This shortcut is so unbelievably annoying on some keyboards.
Change-Id: I5c96d490fd42aa8422fa48be87079b60af81fcd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6527
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is useful for eglot launching rust-analyzer when I'm outside of a
depot project.
Change-Id: I1fa1dc11e3eabe4bdedbd6389b55411641391c7e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6176
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
the upstream Nix test suite uses the pattern of having `.nix` and
`.exp` files for input/expected output, and with this shitty function
navigating between them is a lot simpler
Change-Id: I9d91290057521fe1e1599f69fd6b0f35e1b59960
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6058
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
this lets users switch between all compatible prepositions and cases
for the currently selected combination, which makes the UI a bit
easier to explore.
Спасибо /u/wrest3!
Change-Id: Iaf4e90403c90beb5d75acfa73fd0f5f2cb5035c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5996
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
might as well! if it manages to pay for a beer over the lifetime of
the site, it will have been worth it.
Change-Id: I31ba92ffd4d6e55687f5ee624c44d14d366d0e91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5990
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
with some sprinkling of CSS and some different button classes, this
doesn't look half bad!
Change-Id: I49a3af4a77ce58713c735b2401b807062a3efb21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5989
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
with this commit the application is sort of functional-ish as
intended.
users can select either cases or prepositions, have the remaining
choices appropriately constrained, and get the right question (i.e.
case) matching when selecting both.
there should be some explanatory translations and it needs to be
prettier, but this kind of does what I wanted.
Change-Id: If5bdaa7f93235dc267bf38cf13c2029f44d68415
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5984
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The stable ordering guarantee will make the output a lot nicer (and
more stable).
Change-Id: I7edd1abb0805e948bc41fe5bc111b3cb54592aac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5982
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this commit is mostly to figure out hwo to build a yew application in
depot using the wasm toolchain. it's a bit finnicky, but could be a
lot worse.
Change-Id: I7804a774f1686a1f308ae1a3f549cd0ae7b5dbeb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5980
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
otherwise the files end up clashing with each other, causing annoying
errors on activation
Change-Id: Iaa4df8c50aa183f4a12749c66ee1b7a746d785da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5949
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
this has weird side effects on the AMD thinkpad (of course), but since
that is stationary in my office anyways the power-saving stuff doesn't
matter so much there.
Change-Id: Ie43e3a86b2da885c25eb5c3eb36683adb14edd1a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5948
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
otherwise passing through USB devices is not possible
Change-Id: I3ab52aaae2567f39e483717b74023316fc3d033a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5941
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
sometimes I need a GUI mail client for stuff
Change-Id: I956e804b7167571e535556ad02a50637621b01bf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5923
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
this machine is now sort of permanently stationed in the office, and
thus permanently connected to the big screen.
with this setup, it's comfortable to have it available for a single
workspace (e.g. for videos playing there), but it's too confusing and
unergonomic to use that screen for anything else.
Change-Id: I03556b777c79f68d65d4d8bf1ba1f18982650a8b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5872
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
It only sometimes works and that's not enough times.
Change-Id: I11c1bc6e5c2eec4706bd935352188ffa83057c8f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5869
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Maybe this will lead to me being able to log in to this machine again
eventually.
Change-Id: I348d6ea3b8d4cc6b8083766669ba1371b3d1216b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5866
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I still have the issue where after reboots I can't log in to my
machines without going through a horrible dance with booting a NixOS
installer and so on.
I suspect this has somethign to do with this initial hashed password
set here, but I was unable to verify what password I've actually set
up there, so I'm resetting it to a known string to verify my theory.
Change-Id: Ic9d495255ca48110920cf2df371946ac146dcd72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5865
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
