This has some effect on the Emacs 29 hollow cursor bug, though I
honestly don't fully understand what this does.
Change-Id: I03eaa0a64e81f01a86736ad17b4c1b3a56fe3d5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10461
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This removes the wonky hack with detecting the bottom right window,
and gives me saner, unified handling of this display in the tab
bar (of which there is only one!)
Change-Id: Id21c6b2472d0c89fc4d000a10a9e90d2ddba86b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10165
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This removes everything related to workspaces, as well as the current
RandR configuration, creating a (cleaner) slate for switching to tabs.
This was supposed to be committed earlier, but got broken by
clbot (see b/333).
Change-Id: I2d110bca0d6629a505699210f0aba12882f83d48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10115
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Sets up tab-bar-mode for EXWM, and adds simple initial configuration
and shortcuts to make it behave sanely. I had to assign tab switching
shortcuts myself, as the EXWM input key stuff doesn't work correctly
with the built-in way of setting these shortcuts in tab-bar-mode.
Change-Id: Icd96f03ae7bd2bd5f7c2d59f9aca7a1ca2e7f788
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10116
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Adds an `exwm-assign-workspaces` function that automatically creates
and assigns workspaces to each currently connected monitor. The first
workspace (index 0) is always on the primary monitor.
This function should be idempotent and can be called at any point to
synchronise X outputs and what EXWM is displaying on them.
This works because tabs are disconnected from workspaces completely,
so I don't have to care about what's going on on other workspaces
anymore.
Still missing:
* functions to connect/disconnect outputs
* switching to other outputs from within emacs commands (i.e. without
the mouse)
Change-Id: I7c24aa1b45218fe35de6939e799852b5d11d1272
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This one is a bit stupid because I couldn't figure out a way to
determine the active workspace. It's definitely possible (either
through some XCB calls, or through state management in screen change
hooks), but for now this is fine.
Change-Id: I5e4c531b248caa0021664bad9dc196bef60cfbac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10122
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
By default, this will be the (only) remaining monitor. In N>2
situations, ask the user.
Change-Id: Id68fcf60d56d0414d1072b8ffeef72c608678f52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10121
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Uses a bunch of weird xrandr invocations and completing reads to
configure screens the way I want.
Note that this has a known bug where disconnecting a primary screen
will *not* make one of the remaining screens primary.
Change-Id: Ide5322df446685cc4740d4ddd7b6ca8682375050
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10120
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This built-in emacs library actually provides a data structure that
can work as an LRU list through the existing helper function to move
an element to the front of the ring if it already exists.
As a result, the code for workspace history moving becomes a lot less
brittle and complicated than it was before. No more carefully figuring
out when to modify state, just push it in the ring unless it's being
rotated already.
Change-Id: If354e0618fc5a6d7333776468eec077596cfe9df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9162
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I haven't used that since ... 2018 or so, time for it to go.
Change-Id: I5e1b729bd553940b98335e3d9c7ca5b134fdf692
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9161
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
vertico and consult are more modern versions of interactive narrowing
helpers, as those implemented by ivy and its related packages.
The primary differences (and what I care about here) is that they are
more focused on integration with the core Emacs primitives, rather
than building an ecosystem around them.
For example:
* vertico enhances `completing-read' and friends, but does not attempt
to provide its own ecosystem of functions to *trigger* completions.
* vertico integrates with the default `completion-style' system,
meaning that I can continue to use things like prescient without
extra packages that integrate it with vertico
* consult does not rely on vertico or any other specific completion
framework (such as counsel/swiper do with ivy), and simply
implements its functions using completing-read
This reduces the overall amount of code in the dependency closure and
leads to a less special setup.
Functionality is basically equivalent, except for two things which
counsel came with that I will need to substitute:
* counsel-notmuch (actually this was a separate package, but I didn't
use it much anyways, so just ignoring it for now)
* counsel-linux-app (opening desktop shortcuts, this I will need to make)
As a side note, consult notes "This package is a part of GNU Emacs",
but it doesn't seem to be the case.
Change-Id: Ia046b763bf3d401b505e0f6393cfe1ccd6f41293
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9155
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this machine is now sort of permanently stationed in the office, and
thus permanently connected to the big screen.
with this setup, it's comfortable to have it available for a single
workspace (e.g. for videos playing there), but it's too confusing and
unergonomic to use that screen for anything else.
Change-Id: I03556b777c79f68d65d4d8bf1ba1f18982650a8b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5872
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This allows me to jump to a workspace that is already displayed on
some buffer.
This also interfaces correctly with my back-and-forth jump
functionality, setting the variables to allow quick jumping back to
the previous buffer via the numerical index of the destination or - of
course - via s-b.
Change-Id: I25db7535089bcb17b3d61d53030b9154cfeac023
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5323
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
this feature makes it so that if you jump to a workspace by index, and
then ask to jump that same index again, you end up where you started.
this is useful for quickly jumping to something to look at it, and
then back.
Change-Id: I12f5bba88c0d5b3ae5956d2b6a606f49146551f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5244
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
this makes it possible to move forwards/backwards in workspace history
in the order in which I used them, while tracking the offset (e.g. it
is possible to go 3 steps back, do something, then move 2 steps
forward again).
this should make it possible to learn ad-hoc relative layouts for
whatever task i'm working on and reduce the number of times where i
frantically flip through all workspaces and try to figure out where
anything is.
note that this key binding is not very ergonomic, but i've remapped it
on my kinesis to the prior/next buttons. i never use those. using
<prior>/<next> directly doesn't work because too many modes override
them.
Change-Id: I257723b9e14a68b53be68539dd752db3445546e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5243
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is much easier than the shitty keyboard layout switcher which
caused all kinds of terrifying bugs.
Unfortunately the layout switcher remains additionally because this
doesn't work with Quassel (Qt dropped support for XIM).
Change-Id: I7c58cebf9391216b6e7134d8c283d52cb18332de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3497
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: tazjin <mail@tazj.in>
That machine doesn't exist anymore. Some of them are partially
retained for use on tverskoy instead, but I've mostly nuked it.
Change-Id: Ia358b46353d408798c29c4c90ec06b116b322b5d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3761
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This doesn't replace all of them in the repo, but at least the ones
that are relevant to our move.
Change-Id: I842e7594b4c16af30d880272417874f6b29afd22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3134
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: grfn <grfn@gws.fyi>
The latter doesn't work with AMD devices. This will need some changes
on one of my non-NixOS machines, unfortunately ...
Change-Id: Ib9dfdb9beac67501396a06ea74a0a4371f8ad65e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2628
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
I managed to lock myself out by having the layout set to Russian while
locking the screen. This prevents that from happening.
Change-Id: I15780d2a626d96abe0af8db3736fad75034e66d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2424
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This is a step towards making the completing-read framework more
easily interchangeable (I'm eyeing selectrum).
Change-Id: I7a066e212a5384136defbba8f11ef9ed57abf22e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2240
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
It's a little easier to use this for Swedish than to compose the ä and
ö in the Norwegian layout.
Additionally - to avoid problems when switching to keyboards that have
no hardware remapping - re-applies the caps:super flip on every layout
switch.
Change-Id: I1b2c55761514745291d0eeb1502fa503f84f8aa1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2001
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Some Quassel dialogues (e.g. popups, or clients that aren't connected
yet) don't match the expression and cause errors. This falls back to
the raw title for the window if no match is found.
Change-Id: I67b9cd7f6e2cb8e3e118d7fb7eeb615380be09d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1976
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This gives Quassel buffers sensible titles containing the name of the
network the buffer is currently displaying.
Ideally it would show me the name of the Quassel Core connection, but
this isn't exported from Quassel into the X window title.
The regex captures both the channel and the network, but only the
network is currently used for display - I may revisit that at some
point.
Change-Id: Ife4c06919d9e9c0114ff298e1443b2b27ce2f146
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1964
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
I switched the physical connectors of these to avoid having the boot &
disk unlocking process happen on the vertical screen.
Change-Id: Iaf0be5edd145aa763437e2352438ee11c8d64c3d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1335
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This ends up using the same driver, but generates saner display names
somehow. Who knows what's going on there.
FWIW, it didn't help with the font weight issue.
Change-Id: Ib6161088b23109f4f0e24b8a87c478ad274df4d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/566
Reviewed-by: tazjin <mail@tazj.in>
