Sets up tab-bar-mode for EXWM, and adds simple initial configuration
and shortcuts to make it behave sanely. I had to assign tab switching
shortcuts myself, as the EXWM input key stuff doesn't work correctly
with the built-in way of setting these shortcuts in tab-bar-mode.
Change-Id: Icd96f03ae7bd2bd5f7c2d59f9aca7a1ca2e7f788
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10116
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Adds an `exwm-assign-workspaces` function that automatically creates
and assigns workspaces to each currently connected monitor. The first
workspace (index 0) is always on the primary monitor.
This function should be idempotent and can be called at any point to
synchronise X outputs and what EXWM is displaying on them.
This works because tabs are disconnected from workspaces completely,
so I don't have to care about what's going on on other workspaces
anymore.
Still missing:
* functions to connect/disconnect outputs
* switching to other outputs from within emacs commands (i.e. without
the mouse)
Change-Id: I7c24aa1b45218fe35de6939e799852b5d11d1272
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This one is a bit stupid because I couldn't figure out a way to
determine the active workspace. It's definitely possible (either
through some XCB calls, or through state management in screen change
hooks), but for now this is fine.
Change-Id: I5e4c531b248caa0021664bad9dc196bef60cfbac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10122
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
By default, this will be the (only) remaining monitor. In N>2
situations, ask the user.
Change-Id: Id68fcf60d56d0414d1072b8ffeef72c608678f52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10121
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Uses a bunch of weird xrandr invocations and completing reads to
configure screens the way I want.
Note that this has a known bug where disconnecting a primary screen
will *not* make one of the remaining screens primary.
Change-Id: Ide5322df446685cc4740d4ddd7b6ca8682375050
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10120
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Something changed in the machinery and broke the overriding. I didn't
notice this, as a I was temporarily using an unpatched EXWM.
Change-Id: I1a4e8ea63bd116d86a430e680c2b631474e9a0fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10047
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This was previously only in my Telegram channel, but it might as well
be on the blog itself.
Change-Id: I301ebeaa4dd1875f3858cee5259a5c689b950790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10009
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This can apparently work around some of the CPU throttling bugs on
~modern~ computers.
Change-Id: I807ece85d3eba53857a1cb1e73a33f7924538e96
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9895
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
nixpkgs changed something in how it deals with configuration of the
package set itself when that is externally instantiated (like in
depot)
It seems like we can work around this mostly by just ... deleting some
code, as all instances of this were for allowing unfree code, which
we've already set on the top-level anyways.
* //users/sterni: fix nixpkgs config assertion to point at
pkgs.config
* //users/wpcarro: disable locate service, which is broken in nixpkgs
Change-Id: Iacf6f1c8fd5b5289e7265e155d74f8269a858ceb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9541
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Without this line, accessing external APIs from Gonic (e.g. scrobbling
to Listenbrainz) does not work (unless a local resolver exists). This
is because in the pure Go DNS implementation used in gonic, only
/etc/resolv.conf can provide resolvers.
Change-Id: I26dd9a845b0a70c4cfb983c68da2b76b7e57dfec
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9502
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* zramSwap: during reindexing, geesefs can be pushed to the boundaries
of what the new overaggressive OOM killer accepts, and I don't want
to bother configuring that thing instead.
* umount: geesefs dying unexpectedly leaves broken mounts around,
clean these up before proceeding
This bakes in the assumption that there's only ever one geesefs
service, but that assumption is baked in anyways.
Change-Id: Id85c2f5bc2312a7246ea20229eb36d2cc1bd82c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9500
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... this will make sense soon!
Change-Id: I1f8f32d655afdf868fff4bd09e1fea2943fd7558
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9496
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Can't be bothered to make something more automated for now.
Change-Id: Ie245af90c1a62a5988b97d16f86b6567e1ffafd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9493
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Telega tries to use some random completing-read functions, but I just
want it to use the default one, which I've configured the way I want.
Change-Id: I33da24f257e8ac0cae4a7d25ba6c5e4e656fcad5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9478
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Some of these I don't use, some of these have been replaced with
tree-sitter, some of these have moved into core.
Change-Id: Id0a8aac4189607a89db861bbc09b95c75c45dc0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9310
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The mechanism in nixpkgs does not work, but doing it myself is not
that difficult.
Change-Id: I91b12e9c1f5d381c9990fd46e02169f5275f88da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9309
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially interested in the C++ mode, as I am regularly dealing with
extremely large C++ files where the existing mode is having trouble.
Change-Id: I8c17a35011a23b67043de5de58c4269c636de68b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9308
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I want to experiment with the new tree-sitter modes in Emacs, maybe
they're good.
Change-Id: I706fc8a889fcfa61d0f11d50ecbc67a2899b5bbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9307
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Also expose both formats, then use it from
users/tazjin/presentations/tvix-eval-2023.
Change-Id: Id906e8aff5510a7a4f33336326472e86db18ea32
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9280
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Makes it possible for people in the audience to get to the link
collection reasonably quickly.
Later on that post can also have the talk itself added. For now it is
unlisted.
Change-Id: If9ae1d88d3c6f22bbd70b2b3cbea0b0d42895a93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9208
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Tested-by: BuildkiteCI
This demonstrates a Rust stdlib call that just causes runtime panics
on WASM, for explaining the problems with porting Tvixbolt.
Change-Id: Ief974f1bba509fdac4b9bc9f862ee8f4dfc5158e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9206
Tested-by: BuildkiteCI
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Autosubmit: tazjin <tazjin@tvl.su>
refine doesn't work anymore, inspector seems to be a more modern
alternative.
it's impressive that they managed to write elisp code that broke.
Change-Id: I672de68abdc3d780f66769043afefd8d37438548
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9209
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I spent way too much time fighting LaTeX to do roughly what I want
here again, but all the alternatives are even worse.
Change-Id: Ibe12a4ce175ceb73e9d6e276613dcd4827dd76c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9150
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: Mark Shevchenko <markshevchenko@gmail.com>
Tested-by: BuildkiteCI
This gives me the ability to override the Emacs per-machine easily.
Change-Id: Id480889c108833b0a11c377a9b1e946900c5aba1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9166
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I only wrote this as a hack to make my Emacs config run on gLinux, but
that isn't relevant anymore.
Change-Id: I19c49d500e0ec75bb85644d25a63b0b6c530aa62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9165
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of staying up-to-date with Emacs master, I'd like to be a bit
more laid back and stay with stable releases. Now that native
compilation is in this is not a big difference.
I tried to use `-pgtk`, but it broke EXWM.
Change-Id: I0789a1f73d0149bda912987e726de396545abce1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9164
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of producing a binary that gets called by Emacs, with
input/output serialisation, use a dynamic Emacs module that lets Emacs
more-or-less directly call the relevant GTK functions.
I'm doing this mostly as an experiment. Might be interesting to end up
with a dynamic module that I can dump some experimental code into that
improves my workflows.
To do this, I've exposed the emacs binary used by my Emacs
configuration in an additional `passthru` field. This ensures that the
module is linked against the right version of Emacs.
Change-Id: I1426994fe3455ed1b2a685c5a09705e29fa40950
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9163
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
This built-in emacs library actually provides a data structure that
can work as an LRU list through the existing helper function to move
an element to the front of the ring if it already exists.
As a result, the code for workspace history moving becomes a lot less
brittle and complicated than it was before. No more carefully figuring
out when to modify state, just push it in the ring unless it's being
rotated already.
Change-Id: If354e0618fc5a6d7333776468eec077596cfe9df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9162
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI