I don't really like this package, it's kinda wonky, and now that part
of my mode line logic is in the tab-bar, it's no longer needed.
Change-Id: I4791a75e5ce2f0c49ef0d239cadf6a4f81c73636
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10171
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This removes the wonky hack with detecting the bottom right window,
and gives me saner, unified handling of this display in the tab
bar (of which there is only one!)
Change-Id: Id21c6b2472d0c89fc4d000a10a9e90d2ddba86b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10165
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This removes everything related to workspaces, as well as the current
RandR configuration, creating a (cleaner) slate for switching to tabs.
This was supposed to be committed earlier, but got broken by
clbot (see b/333).
Change-Id: I2d110bca0d6629a505699210f0aba12882f83d48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10115
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Sets up tab-bar-mode for EXWM, and adds simple initial configuration
and shortcuts to make it behave sanely. I had to assign tab switching
shortcuts myself, as the EXWM input key stuff doesn't work correctly
with the built-in way of setting these shortcuts in tab-bar-mode.
Change-Id: Icd96f03ae7bd2bd5f7c2d59f9aca7a1ca2e7f788
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10116
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Adds an `exwm-assign-workspaces` function that automatically creates
and assigns workspaces to each currently connected monitor. The first
workspace (index 0) is always on the primary monitor.
This function should be idempotent and can be called at any point to
synchronise X outputs and what EXWM is displaying on them.
This works because tabs are disconnected from workspaces completely,
so I don't have to care about what's going on on other workspaces
anymore.
Still missing:
* functions to connect/disconnect outputs
* switching to other outputs from within emacs commands (i.e. without
the mouse)
Change-Id: I7c24aa1b45218fe35de6939e799852b5d11d1272
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This one is a bit stupid because I couldn't figure out a way to
determine the active workspace. It's definitely possible (either
through some XCB calls, or through state management in screen change
hooks), but for now this is fine.
Change-Id: I5e4c531b248caa0021664bad9dc196bef60cfbac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10122
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
By default, this will be the (only) remaining monitor. In N>2
situations, ask the user.
Change-Id: Id68fcf60d56d0414d1072b8ffeef72c608678f52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10121
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Uses a bunch of weird xrandr invocations and completing reads to
configure screens the way I want.
Note that this has a known bug where disconnecting a primary screen
will *not* make one of the remaining screens primary.
Change-Id: Ide5322df446685cc4740d4ddd7b6ca8682375050
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10120
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Something changed in the machinery and broke the overriding. I didn't
notice this, as a I was temporarily using an unpatched EXWM.
Change-Id: I1a4e8ea63bd116d86a430e680c2b631474e9a0fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10047
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Telega tries to use some random completing-read functions, but I just
want it to use the default one, which I've configured the way I want.
Change-Id: I33da24f257e8ac0cae4a7d25ba6c5e4e656fcad5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9478
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Some of these I don't use, some of these have been replaced with
tree-sitter, some of these have moved into core.
Change-Id: Id0a8aac4189607a89db861bbc09b95c75c45dc0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9310
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The mechanism in nixpkgs does not work, but doing it myself is not
that difficult.
Change-Id: I91b12e9c1f5d381c9990fd46e02169f5275f88da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9309
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially interested in the C++ mode, as I am regularly dealing with
extremely large C++ files where the existing mode is having trouble.
Change-Id: I8c17a35011a23b67043de5de58c4269c636de68b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9308
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I want to experiment with the new tree-sitter modes in Emacs, maybe
they're good.
Change-Id: I706fc8a889fcfa61d0f11d50ecbc67a2899b5bbf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9307
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
refine doesn't work anymore, inspector seems to be a more modern
alternative.
it's impressive that they managed to write elisp code that broke.
Change-Id: I672de68abdc3d780f66769043afefd8d37438548
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9209
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I only wrote this as a hack to make my Emacs config run on gLinux, but
that isn't relevant anymore.
Change-Id: I19c49d500e0ec75bb85644d25a63b0b6c530aa62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9165
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of staying up-to-date with Emacs master, I'd like to be a bit
more laid back and stay with stable releases. Now that native
compilation is in this is not a big difference.
I tried to use `-pgtk`, but it broke EXWM.
Change-Id: I0789a1f73d0149bda912987e726de396545abce1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9164
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Instead of producing a binary that gets called by Emacs, with
input/output serialisation, use a dynamic Emacs module that lets Emacs
more-or-less directly call the relevant GTK functions.
I'm doing this mostly as an experiment. Might be interesting to end up
with a dynamic module that I can dump some experimental code into that
improves my workflows.
To do this, I've exposed the emacs binary used by my Emacs
configuration in an additional `passthru` field. This ensures that the
module is linked against the right version of Emacs.
Change-Id: I1426994fe3455ed1b2a685c5a09705e29fa40950
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9163
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
This built-in emacs library actually provides a data structure that
can work as an LRU list through the existing helper function to move
an element to the front of the ring if it already exists.
As a result, the code for workspace history moving becomes a lot less
brittle and complicated than it was before. No more carefully figuring
out when to modify state, just push it in the ring unless it's being
rotated already.
Change-Id: If354e0618fc5a6d7333776468eec077596cfe9df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9162
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
I haven't used that since ... 2018 or so, time for it to go.
Change-Id: I5e1b729bd553940b98335e3d9c7ca5b134fdf692
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9161
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
vertico and consult are more modern versions of interactive narrowing
helpers, as those implemented by ivy and its related packages.
The primary differences (and what I care about here) is that they are
more focused on integration with the core Emacs primitives, rather
than building an ecosystem around them.
For example:
* vertico enhances `completing-read' and friends, but does not attempt
to provide its own ecosystem of functions to *trigger* completions.
* vertico integrates with the default `completion-style' system,
meaning that I can continue to use things like prescient without
extra packages that integrate it with vertico
* consult does not rely on vertico or any other specific completion
framework (such as counsel/swiper do with ivy), and simply
implements its functions using completing-read
This reduces the overall amount of code in the dependency closure and
leads to a less special setup.
Functionality is basically equivalent, except for two things which
counsel came with that I will need to substitute:
* counsel-notmuch (actually this was a separate package, but I didn't
use it much anyways, so just ignoring it for now)
* counsel-linux-app (opening desktop shortcuts, this I will need to make)
As a side note, consult notes "This package is a part of GNU Emacs",
but it doesn't seem to be the case.
Change-Id: Ia046b763bf3d401b505e0f6393cfe1ccd6f41293
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9155
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
When entering an incorrect GPG key password, I don't want my whole
buffer layout ruined. A small error message in the modeline is enough.
Change-Id: I7318d685e74fa4e110a9bff30d0de9f7f18b2be4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9149
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Especially the recursive minibuffers only cause a mess.
Change-Id: I6f7f790acd6a2f8cc4cec26c9cf97d5e53e77106
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9148
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Adds a completing-read function (defaulting to ivy for me, but it
doesn't matter) that offers a reliable alternative to standard
buffer-switching implementations.
In particular, this implementation retains a mapping of
buffer names to their buffer *objects*, so that the correct buffer is
selected even if some renaming took place during the selection.
I tried to account for a bunch of the common behaviours I could think
of:
* invisible buffers are ... invisible
* entering a buffer name manually creates that buffer, if there is no
match
* ... unless that buffer is an invisible buffer, in which case it is
selected and switched to
* the first element is always `(other-buffer (current-buffer))`,
because of the ordering of #'buffer-list
Yet, the entire code of my implementation is less than the *setup*
code of ivy-switch-buffers, so it's possible I missed something. Well,
I'll find out ...
Change-Id: I08be0da0863d06c9a930e5efaf916719655db90e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9147
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The `a` shortcut of telega makes it dangerously easy to accidentally
add users whose username starts with `a` to a group.
This unbinds the shortcut, and leaves the member-adding function to be
called manually and explicitly only.
Change-Id: Iedb6291f16a299fc5d4ef824a1be6eb0a449001f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9015
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Work projects are not in git, but I still want to fuzzy jump to them.
Change-Id: Iced78519da69b6992d253e2a0c9ed485f1347164
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9005
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Gonna try to use this not for what it's intended ))
Change-Id: I669422323197cd4dc3812af399f17ed429871108
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9002
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
It does the emoji completion, very important!
Change-Id: I1160e2cf0415b2a4e2b6ebc194cd643a2b18793e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8966
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The images displayed by telega are usually not displaying correctly,
this is fixed by simply .. not rendering them, and letting emacs do it
through an emoji-supporting font (which I do have installed).
Change-Id: I429ff2865c60633329437687c1c09a1aaf8ae29d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8884
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
* //3p/sources: switch stable channel from 21.11 (!) to 23.05
* //users: adapt to emacsUnstable to emacs-unstable rename
* //users/grfn: use default Linux kernel version everywhere,
as 5.15 has broken in this version of nixos-unstable.
* //3p/cgit: adapt to git 2.41.0
The committed changes are the same as the [patch1] I've submitted
to cgit-pink which is in turn based on Christian Hesse's [patch2].
patch1: https://causal.agency/list/thread/20230624144033.802270-1-sternenseemann%40systemli.org.html#20230624144033.802270-2-sternenseemann@systemli.org>
patch2: https://lists.zx2c4.com/pipermail/cgit/2023-June/004843.html
Co-authored-by: Christian Hesse <mail@eworm.de>
Change-Id: I549a62e7c85c66d772edda997819a40f2d5835d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8855
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: grfn <grfn@gws.fyi>
I don't actually use this, and it might be responsible for some EXWM
bugs in the latest version.
Change-Id: I8817e0cdd9d1b68ed6a9bdd072616f63f9f20d21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8758
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
