this configures gerrit's built-in replication plugin to push every
change in depot to sanduny.
this allows us to serve a replica of depot from sanduny.
manual config that was needed which needs to be automated:
* system-wide known_hosts does not work, needed one in /var/lib/git
* .ssh/config MUST be present and configured for sanduny.tvl.su
Change-Id: Iba399f2328abb5acb65dae19a36e265eea0952ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5915
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
This module sets up a user with an SSH key and permissions to receive
a (pushed) replica of depot from Gerrit.
This still needs appropriate configuration in Gerrit's replication
plugin on the other end.
This module has been enabled for sanduny. For now it does not (yet)
configure git serving.
Change-Id: I0fb6f7e696609e71008308e855bdf305dcbcd4f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5913
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
It occured to me yesterday that with the config inside of the module
it is kind of difficult to test cgit locally.
This moves it back to a separate location (//web/cgit-tvl) and makes
the most important things configurable via overrides.
Change-Id: I9b0f4c60b75c31441e1718e63b5b55aba3100aae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5893
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This became an "official" module and dropped the `pw-` prefix.
Relates to b/184
Change-Id: I963f83b55b83015b022ab1b8330ea710d2258631
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5751
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
When Keycloak and oauth2_proxy are restarted simultaneously, the
latter might try to come up (repeatedly!) before Keycloak can serve it
properly.
This leads to systemd considering the unit failed.
Since this all happens in the span of a second or so, slightly
increase the restart delay of the service to ensure it comes back
after Keycloak is ready.
A "proper" fix might be to add a script that runs before the actual
service and waits for Keycloak, but I don't want to prioritise that
right now.
Change-Id: I4dadba686de60ffc103fe889ce19f05ca1d7d4fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5695
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Somehow this ended up generating an empty file, with this change it is
fine again. I was looking at the recent commits of the module in
nixpkgs but couldn't quite figure it out, there are also some vague
references to the attribute set key being used as a hostname, but this
doesn't seem to be true in practice.
To be clear, the previous code was wrong, but at some point it
generated a file that accidentally worked.
Change-Id: I42d55730c09daafe6d6fe0eb3647135e84737bca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5670
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
libdigidocpp is a dependency of qdigidoc4(1) already.
This will need https://github.com/NixOS/nixpkgs/pull/174055
"libdigidocpp: Fix PKCS11 module library path" to work, though.
Change-Id: Ic8d671077977b1d1f099a8b4b23cc537b52aa954
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5647
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
The new version brings the new secretsDir setting which means we no
longer have to hardcode /run/agenix everywhere.
Change-Id: I4b579d7233d315a780d7671869d5d06722d769fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5646
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Nixery is going to gain a new binary (used for building images without
a registry server); to prepare for this the server binary has moved to
cmd/server and the Nix build logic has been updated to wrap this
binary and set the required environment variables.
Change-Id: I9b4f49f47872ae76430463e2fcb8f68114070f72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5603
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Firefox users can add p11-kit-proxy (or other SecurityDevices)
system-wide, by making use of the extraPolicies functionality.
Change-Id: Id58b6cab425199fb0e09e846db2a86d302c0de0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5534
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Cleans up a whole bunch of things I wanted to get out of the door
right away:
* depot internal references to //third_party/nixery have been replaced
with //tools/nixery
* cleaned up files from Github
* fixed SPDX & Copyright headers
* code formatting and inclusion in //tools/depotfmt checks
Change-Id: Iea79f0fdf3aa04f71741d4f4032f88605ae415bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5486
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Someone already packaged the required software, so I didn't have to do
that.
Change-Id: Ifc6a68fd4cd89f4718368a05acb6c6f536e01aab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5431
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
If the Keycloak service is running on the same machine as the oauth2
proxy (spoiler alert: it is!), let the service depend on it.
Change-Id: I30e4222b4cd5589e08849ef6f37cf1fb4369f55a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5421
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
As suggested by sterni, this makes the self-redirect of a machine to
its configuration a generic module working by convention.
In the process of moving this two small fixes have been applied:
* redirect is only applied if the URI is `/`, this is required for
ACME to work
* addSSL = true is added, otherwise we have a certificate but no TLS
listener
Change-Id: Icaef041ff681253a61e36926417bdb2844e3f93d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5313
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes the journaldriver configuration machine-independent.
The secret is loaded from agenix instead of being persisted on disk.
Change-Id: I592ae7f5726fcb7f37a406f69dcf5ac498eeb1b7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5302
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change, entering just "whitby.tvl.fyi" or "sanduny.tvl.su"
in a browser will redirect users to their machine configurations.
Change-Id: Ibf076a469bcce073e1b1970aa568d6fe16a5c75a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5304
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
This needs to be present on all machines that run ACME stuff.
I've switched the address for a .su one because I have a catchall for
these.
Change-Id: I7af8e1f1cb2fcfbcba4b7d1930ed0edef0106d72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5306
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Rather than defining all system users inline on whitby, move them into
a module that can be imported on multiple machines.
Configuration for terminfos that we've added follows along.
Note that while doing this I've disabled logins for riking and isomer
since they are currently inactive in TVL.
Change-Id: Id18031d355afc34079c5e6e49dc6943e61809a8f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5298
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
cgit has its own module now
Change-Id: I9b4cc322374517b8bd3db43345831e2bf43c4bb1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5295
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The ancient `//web/cgit-taz` path stems from the time I had
code.tazj.in serving my initial version of the depot.
I've been meaning to clean this up for forever, so here we go.
Note that this leaves the git-serving module in a strange state where
it only deals with josh. I'll rename it accordingly.
Change-Id: I47ed1e9d90958299b5440a18a1b9075274754e33
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5294
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Since our blog index is on the index page, this makes slightly more
sense.
Change-Id: I7b8164490c133e23d892abef21275f8bfed50b66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5123
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
This was already happening without the trailing slash, but needs to
happen separately with it.
Fixes: b/172
Change-Id: Ic3423fd7a2eaf76a073badd80965cee953df4ce9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5121
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
This means it will end up in journaldriver.
Change-Id: I66f781085b5dac9946b3b9a2bf30e447863e1213
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5122
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
The cookie secret in the encrypted file was too long, because the
generation command in the oauth2_proxy docs is also wrong. Should
probably fix that upstream as well.
Also noticed that an extra '2' snuck into the service name and fixed
that.
Change-Id: I9a344a75993ab1f98299a8d45e7f5b2e146b7fc5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4957
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Adds a feature to emergency-stop deploys by simply running `touch
/var/lib/auto-deploy/stop`.
This can be useful in some situations, especially if there is a
process that reconciles service state (so that e.g. stopping the
unit's timer would be undone).
Change-Id: I233dfac365a578bfa4110eb605b50be079974ba4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4827
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
The priority of binary caches is decided by the remotes in Nix (???),
and by default nix-serve (which is *very* slow) has a lower priority
than cache.nixos.org (which means that it will be preferred over the
faster cache for paths that exist on both).
To avoid this, override the hardcoded (????) priority by serving the
nix-cache-info response directly from nginx instead.
Change-Id: I15a2d6618386d16edaf69f1c9257a36bd72132d2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4823
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
The intent is to configure oauth2_proxy pointing at Keycloak to enable
usage with nginx auth_request directives.
I want to expose this as a function from within the module in which
nginx server configuration blocks can be wrapped, but the function for
that is currently a placeholder.
Change-Id: I5ed7deb9bf1c62818f516e68c33e8c5b632fccfe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4767
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
It looks like we won't need this for oauth2_proxy when combined with
nginx auth_request setups.
Change-Id: I2294aee6226b4f64a27bf6592c2d18092d0268cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4766
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Building nix derivations needs tar (provided by gnutar) and gzip on the
PATH in order to extract .tar.gz archives.
Change-Id: Ia2df7a3a770cfd342dfede58ad34e04805fbd1f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4685
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Note that the login.tvl.fyi WWW configuration is still kind of hanging
around until we've settled where Keycloak lives.
Change-Id: Iaca4e394a7371cafa3716ca66ef09c4eca5b1520
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4626
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
