Write this a bit more compact, by using map_err(|e| …) and ?.
Ideally we'd get rid of the error mapping entirely, by using proper
error types, but that's left for a followup.
Change-Id: I68dc72b162ac89c5ff82d8c2bc26e1c808a0affd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11584
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
The emulator and bigtable client are quite big. Remove them from the
default //tvix:shell.
Put the tests behind a `integration` feature flag, and add a variant
with that enabled to CI, and drop the bigtable tools from //tvix:shell.
Change-Id: Ie042097a0d6fc26542faa96c139b77298ccb160a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11582
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Since a recent nixpkgs bump bringing a version of cargo with
https://github.com/rust-lang/cargo/pull/12914,
crate2nix creates a crate-hashes.json with all crate hashes from
Cargo.lock (and downloads a lot of stuff while producing it).
https://github.com/nix-community/crate2nix/pull/341 prevents this from
happening, but our hardcoded crate2nix pin prevented us from getting the
fix included in 0.14.0, which did land in nixpkgs.
Replace the pin with a simply override, carrying our only leftover patch
on top of it, and link to that PR.
Change-Id: I9503898e15d61fa6a2b1589d141bec1b4ed3d616
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11581
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This documents which Nix version uses which daemon protocol version so that
any implementor of the protocol can make informed choices about how far back to
support legacy.
Change-Id: If2fc11702f7f731816d51928efc9ea9d939e1c00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11579
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This switches from using std::path::Path to using castore paths.
We can drop some error handling in descend_to, as absolute (or redundant)
paths are not representable.
We however now need to convert from a std::path::Path to our
representation, and decide to accept .. canonicalization, as paths in
EvalIO might contain this. Dealing .. to hop into another store path, if
we encounter this, should be dealt with in a previous step.
Change-Id: I5e94693808420c5d56587c68731252b54755bf93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11575
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows converting from std::path::Path to castore PathBufs.
A flag is present to control .. canonicalization, and the usual caveats
about platform-specific differences apply.
Currently only added for unix, we'll carefully consider other platforms
on a case-by-case basis.
Change-Id: If289a92f75a2e5c3eec132b6a91a28d225fc1989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11577
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
There's no need for us to come up with our own names for this.
Also update the comments/docstrings a bit, and inline the intermediate
hash_derivation_modulo calculation.
Change-Id: I09dab8ffe1ebfb6601841e98119eee4ff25d8f39
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11578
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows using both Path and PathBuf in a function argument taking
`impl AsRef<Path>`.
Change-Id: Ibd3ba6fac538069d2fe729d1ef399fdef301668f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11574
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These are fallible methods, so they should be named accordingly.
Change-Id: I6dc271c42989dd6500173488190f65381835d6fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11572
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The empty path (Path::ROOT) is explicitly a valid path, and "foo" is
simply a child of "". The root itself is the only path without a parent.
Change-Id: Iff00dc8aed89eaf98702b664c0df658bd5a1d88a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11569
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Use the shared code for validating node names, since that is what path
components represent.
Change-Id: I12109c1306b224718faa66cf1f2874c78c1436a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11566
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Since PathBuf doesn't have inherent methods anymore, these just forward
to Path itself.
Change-Id: I30f44adc9994337c367bad985ada0e8fcb98dd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11570
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Nix 2.4 accidentally permitted this behaviour, but the revert came
too late to beat Hyrum's law. It is now considered permissible.
Link: https://github.com/NixOS/nix/pull/9867
Change-Id: Ie97777af6765fe1c12c8aa593afe1c9b69125775
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11553
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We implement Debug explicitly, so that we don't just see raw integers.
Change-Id: I11213094728f3e0c674562ee71c092a950041632
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11565
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This contains Path and PathBuf, representing platform-independent paths
representable by the castore model.
These are always relative, and platform-independent, which distinguishes
them from the ones provided in the standard library.
A subsequent CL will move IngestionEntry (and more) to use them.
Change-Id: Ib85857f4159ebc2f3c00192c95d4e5b54ffd4fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11558
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
The sled backend doesn't perform very well with blobs in there,
especially as it's not doing any chunking.
Switch to the `objectstore+file://` instead, which does do CDC.
Change-Id: Ic0d8836c6fc811b80c7202e3ee7f44a05a4f8dfa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11554
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have ingest_entries return an Error type with only three kinds:
- Error while uploading a specific Directory
- Error while finalizing the directory upload
- Error from the producer
Move all ingestion method-specific errors to the individual
implementations.
Change-Id: I2a015cb7ebc96d084cbe2b809f40d1b53a15daf3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11557
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We shouldn't try to represent non-representable things in the ingestion
entries (only to throw an error).
It's cleaner to throw the error directly in the part producing the
stream.
Change-Id: I6b6f6d8c2f677425210142a39f1829ddeefec812
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11556
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: firefly <firefly@firefly.nu>
This is only useful for when we have access to a filesystem, so it
shouldn't be in the root.
Change-Id: I9923aaed1aef9d3a1e8fad41f58821d51c2eb34b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11555
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: firefly <firefly@firefly.nu>
Tested-by: BuildkiteCI
These can be arbitrary bytes in theory. Some of our libraries might
be more strict, or inconsistent w.r.t. their representation of path
separators.
Change-Id: I7981b74fc7d3dd79f5589cf2ef52ced7b71dd003
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11551
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
The one for `fs` was wrong, and ended up being attached to ingest_path,
and the one for `archive` was missing entirely.
Change-Id: I8a4c32fb5293badb1ea0764c278a88e4ca33c018
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11552
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
u64 is an inappropriate type for something memory-sized, and most
callers end up with off-by-ones when using `..` rather than `..=`,
including the tests for the module itself.
Change-Id: If3b7bea27eb0a6c01e0a5d7e64966acbbb664268
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11550
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
These may as well be inlined, and hardly need tests, since they just
alias AsyncReadExt::read_u64_le / AsyncWriteExt::write_u64_le.
Boolean reading is worth making explicit, since callers may differ on
how they want to handle values other than 0 and 1.
Boolean writing simplifies to `.write_u64_le(x as u64)`, which is also
fine to inline.
Change-Id: Ief9722fe886688693feb924ff0306b5bc68dd7a2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11549
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Prior to this, some tests would not build
or would fail in an obscure way.
Change-Id: I68587cc7592492ebfd71ca02fc7ccc9ff7c0196f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11544
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is also needed to make `<nix/fetchurl.nix>` available in the
testsuite.
At some point, we might want to classify different types of tests
excepting a different featureset, but for now, enabling this for all of
glue is fine.
Change-Id: Ided450bbb1f8eb7b66d454bd28bd19b17eb318e4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11546
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes `<nix/fetchurl.nix>` available in the testsuite.
Change-Id: I04657b227c539edec86e5b6033e1016adcfce244
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11537
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
with_size only existed to allow separating the phases of reading size
and reading data, and similarly the Size state only existed to allow
folding size reading into poll_read.
Neither of these are necessary if we make the constructor async,
and handle the size reading there.
As a bonus, this makes BytesReader::len sensibly typed, and permits
implementing is_empty, as Clippy demands of us.
Change-Id: I72173ec06d60b7998d16a3ecfc5e6ac5424bbed3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11542
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The tarball can also not be compressed.
Change-Id: Idbf1b7168cc9a43826355e3cb8b4140f5f53d780
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11535
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We don't actually hold a Tag, we just want to bind the type.
Change-Id: Ida67c026f852ed54c3f18df914cf5c31e6227fd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11541
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The (min, max) pair is already a RangeInclusive in essence, so we might
as well represent it that way.
Change-Id: I2f67f3c47dc36b87e866ff5dc2e0cd28f01fbb04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11540
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The TrailerReader has no purpose separate from BytesReader, and the
code gets a fair bit simpler this way.
EOF handling is simplified, since we just rely on the implicit
behaviour of the existing case.
Change-Id: Id9b9f022c7c89fbc47968a96032fc43553af8290
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11539
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The API is a bit odd here, because we don't have a distinct type for a
known-length reader.
Change-Id: I4a1dd07fbed0a400004dbe4aa2095c51898ad3bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11538
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
The poisoning API is now always available, whether debug_assertions is
enabled or not. When debug assertions are not enabled, it is equivalent
to a unit struct, and is always considered ready and unpoisoned.
Change-Id: I950237f4816d480330d9acab32661ed4f1663049
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11525
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Prepare the NixAttr to return without an intermediate
Vec<(String, NixString)>, and without into_iter(), and send off the
unmoved Derivation struct to known_paths without having to clone it.
Change-Id: Icdb9f78938e998a27d0313c5d9ab15b93af5821d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11531
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
This is specifically used for the fetcher code (only).
Moving it to there for now.
Change-Id: I1e1d0541b85340ef4ff3a4c6b3fa99b51853f539
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11532
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This brings feature parity with the tvix-store CLI command, at least as
far as logging (not tracing) is concerned.
Alternative to cl/11482, RUST_LOG seems to be the more canonical way to
influence this, and is consistent with how it's done in tvix-store.
Change-Id: I923a0b0ae55dc49af7efdacdcf5b1f24e561b3c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11527
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This wasn't really used - to ingest logs in meachine-readable form, the
OTLP infrastructure is more suitable to provide structured logs than
parsing JSON from std{err}, as it also captures span information.
Also, the non-JSON output is a bit too spammy, as remarked in cl/11483 -
change it to `compact`.
Change-Id: I48007b84ba076ab566abbb6131a02868fe0eb397
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11526
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
We separate ingesting the trailer block into a Future of its own,
parametrised on the specifics of the trailer pattern.
This is intended to be used for future work on an async NAR reader,
which needs to read a terminating parenthesis as well as the regular
padding.
Thanks to @griff for suggesting separating the ingestion into its own
Future.
Change-Id: I36c2503baa67937046a63e9bf0cfc38201394025
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11522
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Pin<&mut T> is DerefMut when T: Unpin, so we don't actually need to
explicitly call get_mut.
Change-Id: Iaa312ec49c87100010e09c94f319e57e31da0cd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11520
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We don't use it in the reader anymore.
Change-Id: I98fe204a747711464e9e7ca17df06fa9854eb344
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11519
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We now *never* return the final bytes until we've read the padding
in full, so read_exact is safe to use.
This is implemented by TrailerReader, which splits the phases of
reading (and validating) the final 8-byte block, and providing
the contained payload bytes to the caller.
Change-Id: I0d05946a8af9c260a18d71d2b763ba7a68b3c27f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11518
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We already require R: Unpin in the constructor, so there's not much use
to pin projection.
Change-Id: Ia7bf734dc3aa86ffa6d1d5de778939baa9676bb9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11516
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is semantically a RangeInclusive, since we can only have
0..=u64::MAX at most, and monomorphising on the bounds doesn't
buy us anything.
Change-Id: Ib601d7fd77d703d6c8c5ec27ac9e67bb122ce1c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11515
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Adds debug assertions to ensure that the reader's variants are upheld.
If any of the following happens, then the currently in use reader must
be abandoned:
* A directory or file reader encounters an error
* A directory or file reader is dropped before being fully read from
Additionally, a directory reader must not be read from again after it
has returned None.
These checks are only used when debug_assertions are on, so vanish in
release mode.
Resolves two TODO items added by edef
Change-Id: I27bd9643a632798db5351957506c166b9bd5ca4e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11508
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Autosubmit: Aria Shrimpton <me@aria.rip>
Tested-by: BuildkiteCI
This contains a rough collection of ideas on the TODO list, trying to
keep track of it somewhere.
Change-Id: Ifc5b0cf9f7ac38f7a8e56515882bdf70e349544b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11512
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This is a ReadBuf, not a BufRead.
Change-Id: Ie80e894f4b24b77cdd60409ddfaa66dae0ffeec9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11511
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
The `Error` enum for the `imports` crate has both filesystem and archive
specific errors and was starting to get messy.
This adds a separate `Error` enum for archive-specific errors and then
keeps a single `Archive` variant in the top-level import `Error` for all
archive errors.
Change-Id: I4cd0746c864e5ec50b1aa68c0630ef9cd05176c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11498
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
Ingesting tarballs with a lot of small files is very slow because of the
round trip time to the `BlobService`. To mitigate this, small blobs can
be buffered into memory and uploaded concurrently in the background.
Change-Id: I3376d11bb941ae35377a089b96849294c9c139e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11497
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
With `ingest_entries` being more generalized, we can now use it for
ingesting the directory entries generated from tarballs.
Change-Id: Ie1f7a915c456045762e05fcc9af45771f121eb43
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11489
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Doing the fetch comes up with the root node, but we still need to
descend from there to the desired subpath.
Move things around to ensure the fetch case also only sets root_node.
This logic should probably be moved into smaller, easier to consume
functions.
Change-Id: I6ab9317df794f53d2504029bbc77859e89fef1ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11507
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
We also need to rename the node in case it's a directory or symlink at
the root.
Change-Id: I6e9957200f65991645ae3e1755b943200453dfd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11506
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Nix supports file:// - URLs for `fetchurl` and `fetchTarball`.
Convert the enums and function arguments to hold a URL type.
reqwest::Url is a re-export of the url crate, but they don't re-export
the parsing errors, and as we want to hold these in our Error types, add
it to Cargo.toml explicitly.
The Fetcher::download function now checks on the scheme, and either
opens the file locally, or does do a HTTP request as before.
Fetch gets its custom debug impl, removing potentially sensitive
username and password out of URLs.
Change-Id: I777db1fe487370e822cbfec4624034aca5e08045
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11504
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Have fetcher builtins call queue_fetch() whenever they don't need to
fetch something immediately, and teach TvixStoreIO::store_path_to_node
on how to look up (and call ingest_and persist on our Fetcher).
Change-Id: Id4bd9d639fac9e4bee20c0b1c584148740b15c2f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11501
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We actually want to delay fetching until we actually need the file. A
simple evaluation asking for `.outPath` or `.drvPath` should work even
in a pure offline environment.
Before this CL, the fetching logic was quite distributed between
tvix_store_io, and builtins/fetchers.rs.
Rather than having various functions and conversions between structs,
describe a Fetch as an enum type, with the fields describing the fetch.
Define a store_path() function on top of `Fetch` which can be used to
ask for the calculated store path (if the digest has been provided
upfront).
Have a `Fetcher` struct, and give it a `fetch_and_persist` function,
taking a `Fetch` as well as a desired name, and have it deal with all
the logic of persisting the PathInfos. It also returns a StorePathRef,
similar to the `.store_path()` method on a `Fetch` struct.
In a followup CL, we can extend KnownPaths to track fetches AND
derivations, and then use `Fetcher` when we need to do IO into that
store path.
Change-Id: Ib39a96baeb661750a8706b461f8ba4abb342e777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11500
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This caught me by accident in an earlier revision of cl/11500 -
I had a `NixString`, wanted to return it as a `String`, so I was naively
calling `s.into()`.
That unfortunately gave me the `Display` implementation of `NixString`,
which quotes strings, causing an annoying error further up the stack.
NixStrings are bytes, we can keep the impl From<NixString> for BString,
but having a `.into()` suddenly do quoting is more than unexpected.
Change-Id: I5434ba94bfe6c493d0a57e68225ecc22daa4b948
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11505
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This makes the eval tests and benchmarks standalone Nix derivations and
readTree targets:
```
nix-build -A tvix.cli.eval-nixpkgs-cross-hello-outpath
nix-build -A tvix.cli.benchmark-nixpkgs-attrnames
```
Even without doing any fetches, We need to set `SSL_CERT_FILE`, so
reqwest is able to load its CA roots.
Change-Id: Ib45282d01044165c7816391adbeeb26334f8e924
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11493
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We can speedup uploads further by not uploading all store paths
sequentially, but in parallel.
We still don't respect the reference graph, so nothing changed here.
Change-Id: I40edb5725fe7a15170f5b9f8f4c8bec2130ecca3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11492
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Rather than carrying around an Future in the IngestionEntry::Regular,
simply carry the plain B3Digest.
Code reading through a non-seekable data stream has no choice but to
read and upload blobs immediately, and code seeking through something
seekable (like a filesystem) probably knows better what concurrency to
pick when ingesting, rather than the consuming side.
(Our only) one of these seekable source implementations is now doing
exactly that. We produce a stream of futures, and then use
[StreamExt::buffered] to process more than one, concurrently.
We still keep the same order, to avoid shuffling things and violating
the stream order.
This also cleans up walk_path_for_ingestion in castore/import, as well
as ingest_dir_entries in glue/tvix_store_io.
Change-Id: I5eb70f3e1e372c74bcbfcf6b6e2653eba36e151d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11491
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This function was originally called `read_to_string` but was changed to
`open` to make it so that file contents aren't always held in memory.
A comment and error message were not updated to reflect the new name of
this method.
Change-Id: I3d86e2f6d7006c2e1513121fc3c62efcb7e7b9bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11495
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Fixes some build warnings that only happen when building in release mode
which disables `debug_assertions`.
Change-Id: I554d5fce7c869c23cf4aa93179f0ee9f7f7c834e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11490
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
`ingest_entries` requires that all directories referenced by entries in
the ingestion stream have an explicit entry in the stream.
For example, if the stream contains a file with path `foo/bar`, there
must be an entry that comes later in the stream for the directory `foo`.
Change-Id: I61b4fbbb73ea7278715e04271d8073b484e05e61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11488
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Implement a first pass at the fetchTarball builtin.
This uses much of the same machinery as fetchUrl, but has the extra
complexity that tarballs have to be extracted and imported as store
paths (into the directory- and blob-services) before hashing. That's
reasonably involved due to the structure of those two services.
This is (unfortunately) not easy to test in an automated way, but I've
tested it manually for now and it seems to work:
tvix-repl> (import ../. {}).third_party.nixpkgs.hello.outPath
=> "/nix/store/dbghhbq1x39yxgkv3vkgfwbxrmw9nfzi-hello-2.12.1" :: string
Co-authored-by: Connor Brewster <cbrewster@hey.com>
Change-Id: I57afc6b91bad617a608a35bb357861e782a864c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11020
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Explicitly document and add a debug assertion for that.
It's up to callers to ensure this doesn't happen.
Change-Id: Ib5d154809c2ad2920258e239993d0b790d846dc8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11487
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Move error types and filesystem-specific functions to a separate file,
and keep the fs:: namespace in public exports.
Change-Id: I5e9e83ad78d9aea38553fafc293d3e4f8c31a8c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11486
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This is not a stream of direntries anymore, but a stream of ingestion
entries.
Change-Id: I387f4497b6567066b24c58ca0262e710348180e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11485
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Previously the store ingestion code was coupled to `walkdir::DirEntry`s
produced by the `walkdir` crate which made it impossible to reuse
ingesting from other sources like tarballs or NARs.
This introduces a `IngestionEntry` which carries enough information for
store ingestion and a future for computing the Blake3 digest of files.
This allows the producer to perform file uploads in a way that makes
sense for the source, ie. the filesystem upload could concurrently
upload multiple files at the same time, while the NAR ingestor will need
to ingest the entire blob before yielding the next blob in the stream.
In the future we can buffer small blobs and upload them concurrently,
but the full blob still needs to be read from the NAR before advancing.
Change-Id: I6d144063e2ba5b05e765bac1f27d41b3c8e7b283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11462
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds `Directory::add` which is a convenience helper for adding
nodes into a `Directory` while preserving sorted order.
This implements `Ord` and `PartialOrd` for `FileNode`, `SymlinkNode`,
and `DirectoryNode` so `binary_search` can be used.
Change-Id: I94b86bdef5d0da55aa352e098988b9704cafca19
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11481
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is especially nice, as it allows us getting rid of the other
versions of proc-macro2 and quote.
Change-Id: I9fdd012ee6c0ded3e18ec30504b83ac2032d1390
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11474
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Also, rename the DUMMY_NAME constant in the fixtures to DUMMY_PATH,
which aligns more with the ToString representation and from_bytes
conversions we have on StorePath[Ref].
Change-Id: I39763c9dfa84c5d86f2fd0171b3a4d36fd72f267
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11464
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
There's no point in not enabling these, and rust-analyzer is quite
useless too.
nix-compat users outside of here can still explicitly disable default
features if they don't want to pull in these features.
Change-Id: I8f2f24e7734ad152d1733bc3421098fc91af290a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11455
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This makes use of the vmCmdline and assertVMOutput to boot a NixOS VM
off of `tvix-store virtiofs` have it write a message on successful
bootup, then have it shut down again.
We check we see the message in the output.
Seeding the store with the closure it's what's currently taking most
of the time (as it's all linear still), so log a message before booting
the VM.
Change-Id: I6887d935f589eb0ad6507033c01337e1ec500a0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11191
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Userland likes to seek backwards, and until we have store composition
and can serve chunks from a local cache, we need to buffer the
individual chunks in memory.
Change-Id: I66978a0722d5f55ed4a9a49d116cecb64a01995d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11448
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This makes it easier to separate concurrent requests on the same inode.
Change-Id: I7637c1d889336beeb0d186182ce22fbf60fd16c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11447
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
The docs state we must fill all of the buffer, except on EOF.
Change-Id: Id977ba99c0b15132422474ebbf82bb92b79d55ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11446
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
When (re)initializing a chunked reader, we were erroneously skipping the
first n bytes from all chunks, not just the first one.
Fix this, by passing in an enumerated list of chunks, and only calling
SeekFrom::Start() on the first chunk in the stream.
With this, I'm able to invoke b3sum on bin/bash successfully.
Change-Id: I52ea480569267e093b0ac9d6bcd5c2d1b4db25f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11443
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Increase the discard_buf to 4096 (as I've seen this size).
Use the ready! macro to propagate pendings.
Make it more clear what exactly should be skipped in total, and what
during the current iteration.
Also write down that poll_read call already takes care of updating
self.pos, as I ran into that trap earlier (and added it here).
Change-Id: I2d22e1c8a835c0f3dd0c648917009b2bad4fd57c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11442
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
If the resulting offset equals to our current position, there's no need
to recreate a reader.
Change-Id: I855f0c79c514c16ca48a78e12978af2835fbbd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11441
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
State that this case applies if the blob is small enough to fit inside a
single chunk.
Change-Id: I0383514729e686799599b629cf1303b284147bb4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11440
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously returned Ok(None) when being asked for more granular
chunking info, signalling the blob does not exist at all.
This is however incorrect, we should return an empty Vec instead, as
documented in the trait.
Change-Id: I83ecc2027e0767134c7598792c2ee6d964853c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11439
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
It's perfectly normal if we ask for more granular chunking info and the
backend responds it does not have it.
Change-Id: I593ab3e53b4f4e70c99f39b266546d2ac8eb10c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11437
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We're receiving bytes over the wire, and encode them the same way
B3Digest does internally, but don't use it for formatting, as we're
discarding that string.
In case the sent bytes don't have the right length, the string will be
short, but it's better to still have it as a field, even if it's not a
valid b3 digest.
Change-Id: I6ef08275d51c8a0d98f5e46844b15dfd05d17cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11436
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These were copying unnecessarily. Instead, have a
InodeData::from_node(), which *consumes* the Node entirely, returns
`InodeData` and the split-off name (which is not part of InodeData).
Callers can then use the result in various helper functions, like:
- InodeData::as_fuse_type
- InodeData::as_fuse_file_attr
- InodeData::as_fuse_entry
… to prepare their replies to the kernel.
This removes not only a bunch of clones, but also a lot of copy-pasted
code.
Change-Id: Idbca5f25cc29e96c1f4c614b33dff2becb0a8738
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11435
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Use a proper graph library to ensure all nodes are reachable from the
root.
We had a bit of that handrolled during add(), as well as later, which
had an annoying bug:
Redundant nodes were omitted during insert, but when returning the list
during finalize, we did not properly account they need to be introduced
before their parents are sent.
We now simply populate a petgraph DiGraph during insert (skipping
inserting nodes we already saw), and use petgraph's DfsPostOrder to
traverse the graph during finalize.
If the number of returned indices equals the total number of nodes in
the graph, all nodes are reachable from the root, we can consume the
graph and return the nodes as a vec, in the same order as the traversal
(and insertion).
Providing a regression test for the initial bug is challenging, as the
current code uses a bunch of HashSets. I manually tested ingesting a
full NixOS closure using this mechanism (via gRPC, which exposes this
problem, as it validates twice), and it now works.
Change-Id: Ic1d5e3e981f2993cc08c5c6b60ad895e578326dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11418
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have a Option<Box<dyn DirectoryPutter>>, which is lazily initialized
whenever we first want to upload a directory.
Have the loop explicitly break when it encounters the root_node, and
deal with the flushing after the loop.
Deal with the FUTUREWORK (assertion for root directory digest matching
what the DirectoryPutter returns).
Change-Id: Iefc4904d8b8387e868fb752d40e3e4e4218c7407
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11417
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Separate this a bit stronger from the main application flow.
Change-Id: I2e9bd3ec47cc6e37256ba6afc6e0586ddc9a051f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11416
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Align these names and comments with the two users, to make it more
obvious we're doing the same thing here, just use a different method to
come up with entries_per_depths.
Change-Id: I42058e397588b6b57a6299e87183bef27588b228
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11415
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This did very little, and especially the part of relying on the outside
caller to pass in a Directory if the type is a directory required having
per-entry-type specific logic anyways.
It's cleaner to just inline it.
Change-Id: I997a8513ee91c67b0a2443cb5cd9e8700f69211e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11414
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes it easier to understand the code.
Change-Id: I0a9047433000551a6ba1f50a8c5c93527bc86216
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11413
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously updated this.pos also in case the underlying read returned
an error.
Also, use the ready! macro to remove the match block, and instrument
errors returned during start_seek.
Change-Id: Ic32e26579d964a76b45687134acc48d72d67c36f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11421
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
When a directory or file is open()'ed, we already put some data into
a lookup table, and subsequent operations then use the returned handle
id.
By also adding the span that's been created during these calls into the
lookup table, we can properly set the span parent for these requests,
nicely connecting the individual operations to the bigger picture.
Change-Id: Ia354842fccdbc7f45c2d3efda3acf058b2dbc48e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11429
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Instead of creating another child span, we can use
`tracing::Span::current().record(k,v)` to add an additional field to the
current span.
Change-Id: I337faac0e73a0da6eb0a52cb75c2e8c026eff774
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11428
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This currently shares some code with readdir, except it's also providing
a second `fuse_backend_rs::api::filesystem::Entry` argument to the
`add_entry` function call.
Refactoring this to reduce some duplication is left for a future CL.
Change-Id: I282c8dfc6a711d00a4482c87cbb84d4950c0aee9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11426
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Use rq.handle in `release` too, and remove interpolating it into the
log message itself.
Also update the comment, we don't get ownership, just simply drop, and
change the level to warn!, as suggested in cl/11425.
Change-Id: If4e6cff6d8b580671b1548ae3862851db4af6694
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11427
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Similar to how we already handle opening files, implement opendir/
releasedir, and keep a map of dir_handles. They point to the rx side of
a channel.
This greatly improves performance listing the root of the filesystem
when used inside tvix-store, as we don't need to re-request the listing
(and skip to the desired position) all the time.
Change-Id: I0d3ec4cb70a8792c5a1343439cf47d78d9cbb1d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11425
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This allows us acquiring the lock in sync code still. Also, simplify
some of the error handling a bit.
Change-Id: I29e83b715f92808e95ecb0ae9de787339d1a371d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11424
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We can just pass an async move closure to `self.tokio_handle.block_on`
and make this a bit shorter.
Change-Id: Iba674f34f22ba7a7de7c5bae59d64584884cb17c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11423
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This exposes `user.tvix.castore.{blob,directory}.digest` xattr keys for
files and directories:
```
❯ getfattr -d /tmp/tvix/06jrrv6wwp0nc1m7fr5bgdw012rfzfx2-nano-7.2-info
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.directory.digest="b3:SuYDcUM9RpWcnA40tYB1BtYpR0xw72v3ymhKDQbBfe4="
❯ getfattr -d /tmp/tvix/156a89x10c3kaby9rgf3fi4k0p6r9wl1-etc-shells
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.blob.digest="b3:pZkwZoHN+/VQ8wkaX0wYVXZ0tV/HhtKlSqiaWDK7uRs="
```
It's currently mostly used for debugging, though it might be useful for
tvix-castore-aware syncing programs using the filesystem too.
Change-Id: I26ac3cb9fe51ffbf7f880519f26741549cb5ab6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11422
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't need to copy if we explicitly say that the returned
Option<Path> may hold onto bytes from the passed in &DirEntry.
Change-Id: Ib46b6fd2f8f19a45f8bef79c4c1d2fa6b490cad7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11410
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
It was returning `{ line, col, file }` instead of `{ line, column, file
}`.
Note this is not a regression in Nix, Nix always had `column` since
2013.
Change-Id: I4871a201b32324dff0432526d0449806a535828f
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11409
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This tells josh to include the patch from
third_party/overlays/patches/cbtemulator-uds.patch at
nixpkgs/cbtemulator-uds.patch.
We then use the `additionalOverlays` feature introduced earlier, and
pass it an overlay adding the patch to `cbtemulator`.
This only gets applied if tvix/shell.nix is not called with a pkgs
argument, which is the case in the tvix view.
Change-Id: I7bc5543460ddd30325ab0998e891c15fcaf8bcfe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11408
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
While the compiler might realize it's a good idea to inline these,
especially considering this is in the same crate [1], it doesn't hurt to
add that annotation too.
Suggested in cl/11385.
[1]: https://nnethercote.github.io/perf-book/inlining.html
Change-Id: If679fce0e1aab9ec681ba60f689d386d6fd92d61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11403
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
We should cap the time of a `cargo build && cargo test` to a reasonable
amount of time.
Change-Id: If618198459ac267f9f6d7eb60466534a95a95c2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11404
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is a stream of DirEntry, so let's call it direntry_stream.
Change-Id: I5b3cb4efba899d746393f75f6ece7eaa79424717
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11401
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Instead of using an additional Nix build producing a directory structure
containing xz-compressed NAR files and NARInfos, and uploading these via
`curl` to NAR-bridge, which then decomposes them and uploads them to
tvix-store, have tvix-store interpret the exported reference graph
directly, and deal with the uploading on its own.
Change-Id: I44ee0b132944c53d11abb688d2d017f0cc9c3d97
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11398
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows copying individual store paths from the local /nix/store
into tvix-store.
As we don't support getting this information from Nix yet, we currently
expect metadata to be provided externally:
Nix' `exportReferencesGraph` feature contains pretty much all data we
need for this. Expect a list of this information at a well-known key
(`closure`, similar to nixpkgs' `pkgs/build-support/binary-cache/
default.nix`).
We currently simply upload all store paths sequentially, without any
parallelism or awareness in how the reference graph looks like.
As long as the connected stores don't enforce this, this is fine, at
least for now.
Change-Id: Ib83c998465adddfdb110db994843c44e26b3d3d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11397
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
`toJSON` transform a Nix structure into a JSON string.
For each context in that Nix structure, the JSON string must possess it.
Thus, it is necessary to take the union of all contexts and attach it to
the final structure.
Unfortunately, the return type of `into_json` is a serde's JSON object,
not a string. Therefore, it is not possible to reuse `NixString`
machinery.
Context tests are reinforced as Nix does not test those behaviors.
Fixes b/393.
Change-Id: I5afdbc4e18dd70469192c1aa657d1049ba330149
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11266
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
There's little reason to keep the nar writer using Async{Read,Write}
traits from futures, while everything else async in tvix (and
nix-compat) uses tokio.
Change-Id: I8cd1efcd0dd5bb76471de997603c7b701a5095de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11391
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
This doesn't have much to do with the plain "wire" format, it's merely
one user of it.
Also, use the more "public" `wire::` API to read/write bytes, strings,
bools and u64s.
Change-Id: I98dddcc3004dfde7a0c009958fe84a840f77b188
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11390
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Move everything bytes-related into its own module, and re-export
both bytes and primitive in a flat space from wire/mod.rs.
Expose this if a `wire` feature flag is set. We only have `async` stuff
in here.
Change-Id: Ia4ce4791f13a5759901cc9d6ce6bd6bbcca587c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11389
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't have it in all Cargo.toml files either.
Change-Id: Ifcb333a39603a7e402ab0068e0f0f1b5af769e13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11388
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
This is another representation about information Nix has on a Store
Path. It's encountered in the exportReferencesGraph feature.
Change-Id: Ia0c08c369f4af9e50ebe3a5053bd98fadaa0003d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11396
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This actually does a bit of allocation. There's two Vecs, one for
references and one for signatures.
We can get rid of the Vec at nar_hash.
Change-Id: Ie025309b6678f83f5b961d49ff75dcfc7da145a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11395
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We use the (slightly more tolerant) from_str to deserialize, and
serialize out as SRI.
Change-Id: If76b0ed2d4e243904f02df34f6c90b976c0bab8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11393
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Move the code implementing it from StorePath to StorePathRef, and have
the StorePath impls use that too.
Drop the debug_assert in every comparison - we have tests for this to
ensure it keeps working, and built up some confidence by piping a lot of
other store paths through it in the meantime.
Change-Id: I288bad3dfa597f68d63c4bcda7791f722b7a8ced
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11392
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Put behind the "cloud" backend, like in the `tvix-castore` crate.
Change-Id: Ib38d198baf11ab2a4b6dc405121676147c424611
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11362
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
We forgot to only write the part of the padding that has not been
written already.
Unfortunately it seems the tokio mocking thing does buffer small writes,
so the tests succeeds even with the bug :-/
Change-Id: I5a6cf04212d559728639427c57207094d507ec75
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11384
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Right now `builtins.hashFile` always reads the entire file into memory
before hashing, which is not ideal for large files. This replaces
`read_to_string` with `open_file` which allows calculating the hash of
the file without buffering it entirely into memory. Other callers can
continue to buffer into memory if they choose, but they still use the
`open_file` VM request and then call `read_to_string` or `read_to_end`
on the `std::io::Reader`.
Fixes b/380
Change-Id: Ifa1c8324bcee8f751604b0b449feab875c632fda
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11236
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds a Directory service using
https://cloud.google.com/bigtable/docs/ as a K/V store.
Directory (closures) are put in individual keys.
We don't do any bucketed upload of directory closures (yet), as castore/
fs does query individually, does not request recursively (and buffers).
This will be addressed by store composition at some point.
Change-Id: I7fada45bf386a78b7ec93be38c5f03879a2a6e22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11212
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
In case structured attrs is enabled, rather than adding a
space-separated list to the "outputs" environment variable, a "proper"
list is added to the JSON itself, at the "outputs" key.
Fixes b/395.
Reported-By: Alyssa Ross <hi@alyssa.is>
Change-Id: I2834ede9cfcf49d5e81e1056bf8f9bb9b65ddad8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11386
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Make it a bit more clear that this is the total padding length, not the
padding length we still need to write.
Change-Id: I9ff4aa16f256fda367b4b9295abf82ed01b1f989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11383
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This is perfectly fine to track the position inside a reader too, so
rename it to reflect that.
Also make the docstring a bit less write-specific.
Change-Id: I831b0a8fe44a2477d4af96fefc692b9aabc378f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11382
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We actually did construct other payload sizes than the test function was
intended to, because I'm too stupid to count. Fix that, and also update
a leftover _debug in a test name.
Change-Id: I1bff8551f2078afe82f789646b851f2fcff3e82c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11381
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Moving out the handshake route out of tvix-daemon to nix-compat.
We're bumping the protocol to version 37. It does not change anything
for us. Version 37 introduced a change in the build result
serialization. We do not implement that for now.
Tested tvix-daemon against Nix via the integration test to make sure
we did not break anything in the process.
Taking advantage of this refactor to remove the unused anyhow
dependency in tvix-daemon.
Change-Id: I8a2aad0b6dbb0aaa997446a612a365fd7d70336c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11379
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This allows using read_u64, write_u64, which is a bit easier to juggle
with.
Also, update names to align with the nix codebase, which makes it easier
to spot both the constant name as well as the value.
Leave the ASCII interpretation as a comment afterwards.
Change-Id: I0b9ab187acd22807e2785b0722aa4300dab37c51
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11378
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
`primitive.rs` implements reading and writing primitive (fixed-length)
types in the wire format, used in the the nix daemon protocol and NAR
format.
Move worker-protocol specific magic bytes to worker_protocol.rs (and
possibly further split there once needed)
Change-Id: If681c01e9460294619f1d000229b81f0ac745810
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11377
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This includes String, &str etc. An example testcase with &str is
provided.
Change-Id: I900186d6ceb52f52bd41ef4596524c1f5b52470b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11376
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Use the same EMPTY_BYTES trick from BytesWriter to write out the
padding, rather than allocating a Vec.
Change-Id: Ifb4ba1b45b7388adbc135fc8e46fd3d3cedd30aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11375
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Only describe the format once (in `read_bytes`, and simplify the other
docstrings a bit.
Change-Id: Iff898f3c4173d506a357bc14bdffbf69c4c6e0e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11374
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
This isn't used anywhere so far, and if someone really wants to, they
can simply make the range open-ended.
Change-Id: Iae9bcaa1f7ea032dd3ee76c8c142a38b6b72894d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11373
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
We were wrongly using `'de` as a lifetime for both `Deserializer` and
`StorePathRef`.
This prevented Deserializing into a struct containing `StorePathRef`.
See https://serde.rs/lifetimes.html#the-deserializede-lifetime, the last
part of the paragraph:
The 'de lifetime should not appear in the type to which the Deserialize
impl applies.
- // Do not do this. Sooner or later you will be sad.
- impl<'de> Deserialize<'de> for Q<'de> {
+ // Do this instead.
+ impl<'de: 'a, 'a> Deserialize<'de> for Q<'a> {
This fixes it, and adds a test, deserializing into a `Container` struct.
It also fixes the existing test cases, deserialize_ref was actually
deserialize_owned, and deserialize_owned didn't exist yet - but they
alone are not enough to provoke the lifetime issues.
Change-Id: Iaed2832998cae5f192eafe7fd5243e82ff6e051e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11372
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Add the primitives necessary to read the client settings from the Nix
daemon wire protocol.
Introducing the read_string primitive. This trivial primitive parses a
read_bytes call, check the bytes are valid utf-8 bytes and wraps the
result in a String.
Change-Id: Ie1253523a6bd4e31e7924e9898a0898109da2fa0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11358
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This (and more) should now be covered by the generic testsuite
(in crate::blobservice::tests).
Change-Id: Ib3afc4f19f7e37a561b7398d43663dc941971f5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11365
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This deals with writing byte packets of larger sizes to an underlying
AsyncWrite.
Its constructor receives the expected size. It also deals with writing
padding if flush/shutdown is called after writing all the payload.
Change-Id: I8acbf992467f3862ffb8c7d669e8c0c8eced14c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11355
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Have this return a StorePathRef<'_>, rather than a StorePath, and leave
it up to the caller to possibly convert it to a owned StorePath.
This avoids some allocations, if we only want to validate.
Change-Id: I5cf8e246fe02bd4e631f46a5cb86d3f77a728a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11361
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Let's make this usable for the entire crate.
Change-Id: I754408908a00296ee80dd52680f84b8a7cb22317
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11354
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
`appendContext s ctx` will just append a user-crafted context attrs to `s`.
The most important part of this builtin is to perform all the relevant invariant validations
to avoid letting the user craft invalid contexts which can never be built, e.g. invalid store paths,
inexistent derivations, etc.
This version is incomplete and full of TODOs, but passes all the Nix's
context strings tests, so we turn them on.
Change-Id: I625dc5e7c4f5b784f078b390f04b0ee5a8d65a7c
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11263
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Fixes b/392.
Output paths were created, depending on a plain store path but no
context string was attached to track that plain dependency.
Context string propagation tests are strengthened to prevent any
regression on this.
Change-Id: Ifd6671aeba6949324b0bb9f0f766b87db728d484
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11351
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Actually these are all u64 LE encoded on the wire.
Change-Id: I5ca22c7639607ac47117cd946e036a444271885a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11348
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Using all the primitives recently implemented to nix-compat to reach
the point where the Nix client start to send us operation requests.
Using a small integration test script (or the VM test, but let's face
it, it's too slow to be useful), we manage to reach the point where
we're able to read a store operation:
2024-03-21T18:53:27.624876Z INFO tvix_daemon: Incoming connection addr=unix
2024-03-21T18:53:27.625312Z INFO worker:perform_init_handshake: tvix_daemon: Trust sent conn=Connection(unix) conn=Connection(unix)
2024-03-21T18:53:27.625406Z INFO worker: tvix_daemon: Client hanshake succeeded conn=Connection(unix)
2024-03-21T18:53:27.625488Z INFO worker: tvix_daemon: Operation received op=SetOptions conn=Connection(unix)
We had to take some shortcuts wrt. stderr/log management. The CPP Nix
codebase is a bit confusing in that area. I'll need to spend more time
reading this to fully understand what's happening there. For now,
sending the STDERR_LAST command to the client does the trick.
Change-Id: I9b0e20a52d885e64fe29188496aac5334de61edd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11233
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is used by the nix client to determine whether or not the daemon
trust it. The trust conditions check are daemon-specific, hence not
part of nix-compat.
Change-Id: Icbcba2f7f1fd58f67e7da72d22a264f5a3f3619d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11231
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Write counterpart of read_bytes. Despite its name, we mostly use it to
write strings (as in ascii strings) to the wire.
We also extract the padding calculation in its own function.
Change-Id: I8d936e989961107261b3089e4275acbd2c093a7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11230
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Now, it supports almost everything except `recursive = false;`, i.e. `flat`-ingestion
because we have no knob exposed in the tvix store import side to do it.
This has been tested to work.
Change-Id: I2e9da10ceccdfbf45b43c532077ed45d6306aa98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10597
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Instead of enforcing NAR SHA256 all the time, we generalize the
`PathInfo` constructor to take a `CAHash` argument which can drive
whether we are having a flat, NAR or text scheme.
With this, it is now possible to implement flat schemes in our
evaluation builtins, e.g. `builtins.path`.
Change-Id: I15bfee0ef4f0f428bfbd2f30c57c012cdcf6a976
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11286
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Bump to the latest u-root release. This seems to be compatible with go
1.22, too, which previously segfaulted the compiler in cl/11289.
Change-Id: Ie8a0d3cb51a435d6a0b194b38a9c83ee260618df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11291
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This builtin only transforms any `NixContextElement::Derivation` into the trivial `NixContextElement::Plain`.
This is a forgetful functor on derivation-deep context strings.
The test coverage of this change is done in cl/11264.
Change-Id: Icd00778c97766be6db8a6bdabaa59e9724353ec5
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11262
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Derivation that depends on `${d.drvPath}` generates a `NixContextElement::Derivation(drvPath)` context string.
In turn, this makes the dependent derivation depend on *ALL* outputs of that derivation.
Note that a dependency on `${d.drvPath}` generates an input source
dependency too.
This is a complete implementation of the context string system in Nix on
the "input population" side.
The test coverage of this change is taken care in cl/11264.
Change-Id: I97fe5f7c772a6b1cc4366bee071aa691a11fcde6
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11261
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Nixpkgs make use of it and this is a 2.3 builtin that was missed.
Change-Id: If36d748eed4a5f777344556c0802392c76c8d53c
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11260
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
