Previously the construction of globals (a compiler-only concept) and
builtins (a (now) user-facing API) was intermingled between multiple
different modules, and kind of difficult to understand.
The complexity of this had grown in large part due to the
implementation of `builtins.import`, which required the notorious
"knot-tying" trick using Rc::new_cyclic (see cl/7097) for constructing
the set of globals.
As part of the new `Evaluation` API users should have the ability to
bring their own builtins, and control explicitly whether or not impure
builtins are available (regardless of whether they're compiled in or
not).
To streamline the construction and allow the new API features to work,
this commit restructures things by making these changes:
1. The `tvix_eval::builtins` module is now only responsible for
exporting sets of builtins. It no longer has any knowledge of
whether or not certain sets (e.g. only pure, or pure+impure) are
enabled, and it has no control over which builtins are globally
available (this is now handled in the compiler).
2. The compiler module is now responsible for both constructing the
final attribute set of builtins from the set of builtins supplied
by a user, as well as for populating its globals (that is
identifiers which are available at the top-level scope).
3. The `Evaluation` API now carries a `builtins` field which is
populated with the pure builtins by default, and can be extended by
users.
4. The `import` feature has been moved into the compiler, as a
special case. In general, builtins no longer have the ability to
reference the "fix point" of the globals set.
This should not change any functionality, and in fact preserves minor
differences between Tvix/Nix that we already had (such as
`builtins.builtins` not existing).
Change-Id: Icdf5dd50eb81eb9260d89269d6e08b1e67811a2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7738
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The `im::OrdMap` is already small and cheap to copy while sharing
memory, so this is not required anymore.
Only the `KV` variant may have slightly larger content, but in
practice this doesn't seem to make a difference when comparing the two
variants and this one is less complicated.
Change-Id: I64a563b209a2444125653777551373cb2989ca7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7677
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This uses the `im::OrdMap` for `NixAttrs` to enable sharing of memory
between different iterations of a map.
This slightly speeds up eval, but not significantly. Future work might
include benchmarking whether using a `HashMap` and only ordering in
cases where order is actually required would help.
This switches to a fork of `im` that fixes some bugs with its OrdMap
implementation.
Change-Id: I2f6a5ff471b6d508c1e8a98b13f889f49c0d9537
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7676
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The conversion from im::Vector -> Vec is cheaper for NixList
construction (of course), so where possible we should make use of
that.
This updates most builtins dealing with lists to use Vector directly,
and marks the function constructing NixList from Vec as deprecated so
that we get appropriate warnings in places where it's still in use.
These places are currently inside of JSON serialisation logic which is
in flux right now, so lets leave them as-is until it's stabilised.
Change-Id: I037f12a2800f2576db4d9526bd935efd079163f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7671
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is a persistent, structurally sharing data structure which is
more efficient in some of our use-cases. I have verified the
efficiency improvement using `hyperfine` repeatedly over expressions
on nixpkgs.
Lists are not the most performance-critical structure in Nix (that
would be attribute sets), but we can already see a small (~5-10%)
improvement.
Note that there are a handful of cases where we still go via `Vec`
that need to be fixed, most notable for `builtins.sort` which can not
currently be implemented directly using `im::Vector` because of a
restrictive type bound.
Change-Id: I237cc50cbd7629a046e5a5e4601fbb40355e551d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7670
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
It's been a while since the last time, so quite a lot of stuff has
accumulated here.
Change-Id: I0762827c197b30a917ff470fd8ae8f220f6ba247
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7597
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Fixes b/212. Based on feedback in https://cl.tvl.fyi/c/depot/+/7492, all
uses of `NixAttrs::from_map` have been removed. Only `from_iter` and
`from_kv` remain.
Change-Id: I52e25f73018c2aa1843197427516b7a852503e2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7500
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: IslandUsurper <lyle@menteeth.us>
Allows for the removal of some BTreeMap usage when constructing NixAttrs
by allowing any iterator over 2-tuples to build a NixAttrs. Some
instances of BTreeMap didn't have anything to do with making NixAttrs,
and some were just the best tool for the job, so they are left using the
old `from_map` interface.
Change-Id: I668ea600b0d93eae700a6b1861ac84502c968d78
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7492
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This passes all the function/thunk-pointer-equality tests in
cl/7369.
Change-Id: Ib47535ba2fc77a4f1c2cc2fd23d3a879e21d8b4c
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7358
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
When we start unrecursivifying (sp?) things, Rust's borrow checker
is going to be a headache; its magic only works when you use the CPU
stack as your call stack.
Fixing the borrow checker issues usually involves adding lots of
`clone()`s. Right now `NixList` is the only variant of `Value` that
isn't cheap to clone() -- all the others are either a wrapper around
Rc or else are of bounded size.
Note that this requires dropping the `DerefMut for NixList` instance
and using `Vec<Value>` instead in those situations.
Change-Id: I5a47df66855342aa2064f8f3cb7934ff422d26bd
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7359
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This implementation closely follows the original implementation in
Nix, including the use of an equality-based "set" structure to track
keys that have already been processed.
Note that this test does not yet enable the `notyetpassing` test for
builtins.genericClosure because (for as of yet unknown reasons) this
test compares against XML output (however, evaluating the test case
actually does work).
This takes us one step closer to nixpkgs eval.
This commit was written somewhere in the North Sea.
Co-Authored-By: Griffin Smith <root@gws.fyi>
Change-Id: I450a866e6f2888b27c2fe7c7f77ce0f79bfe3e6c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7310
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Add a new `documentation: Option<&'static str>` field to Builtin, and
populate it in the `#[builtins]` macro with the docstring of the builtin
function, if any.
Change-Id: Ic68fdf9b314d15a780731974234e2ae43f6a44b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7205
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Refactor the arguments of a Builtin to be a vec of a new BuiltinArgument
struct, which contains the old strictness boolean and also a static
`name` str - this is automatically determined via the ident for the
corresponding function argument in the proc-macro case, and passed in in
the cases where we're still manually calling Builtin::new.
Currently this name is unused, but in the future this can be used as
part of a documentation system for builtins.
Change-Id: Ib9dadb15b69bf8c9ea1983a4f4f197294a2394a6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7204
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Break out all pure builtin functions to top-level functions defined
within the `pure_builtins` module in `builtins/mod.rs`.
Change-Id: I9a10660446d557b1a86da4c45a463e9a1a9b4f2d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7201
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Mostly as a proof-of-concept of the new proc-macros for defining
builtins, define a single builtin (the first in the list, `abort`) at
the top-level of a child module within builtins/mod.rs, and add it to
the list of builtins returned from `pure_builtins`.
If this works nicely, we can start breaking out the rest of the builtins
into the top-level too, in addition to introducing additional sets of
builtins (to differentiate between pure and impure builtins).
Change-Id: I5bdd57c57fecf8d63c9fed4fc6b1460f533b20f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7199
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This implements builtins.split, and passes eval-okay-regex-split.nix
(which is moved out of notyetpassing).
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ieb0975da2058966c697ee0e2f5b3f26ccabfae57
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7143
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This is a bit tricky because the comparator can throw errors, so we
need to propagate them out if they exist and try to avoid sorting
forever by returning a reasonable ordering in this case (as
short-circuiting is not available).
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Change-Id: Icae1d30f43ec1ae64b2ba51e73ee467605686792
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7072
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Lists are compared lexicographically in C++ nix as of [0], and our
updated nix test suites depend on this. This implements comparison of
list values in `Value::nix_cmp` using a very similar algorithm to what
C++ does - similarly to there, this requires passing in the VM so we can
force thunks in the list elements as we go.
[0]: 09471d2680#
Change-Id: I5d8bb07f90647a1fec83f775243e21af856afbb1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7070
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
CL/7034 looks great, except that for a length-N target string it
will perform N deep copies of each of the from and to-lists. Let's
use references instead of clones.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Icd341213a9f0e728f9c8453cec6d23af5e1dea91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7095
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
CL/6867 added support for builtins.import, which required a cyclic
reference import->globals->builtins->import. This was implemented
using a RefCell, which makes it possible to mutate the builtins
during evaluation. The commit message for CL/6867 expressed a
desire to eliminate this possibility:
This opens up a potentially dangerous footgun in which we could
mutate the builtins at runtime leading to different compiler
invocations seeing different builtins, so it'd be nice to have
some kind of "finalised" status for them or some such, but I'm not
sure how to represent that atm.
This CL replaces the RefCell with Rc::new_cyclic(), making the
globals/builtins immutable once again. At VM runtime (once opcodes
start executing) everything is the same as before this CL, except
that the Rc<RefCell<>> introduced by CL/6867 is turned into an
rc::Weak<>.
The function passed to Rc::new_cyclic works very similarly to
overlays in nixpkgs: a function takes its own result as an argument.
However instead of laziness "breaking the cycle", Rust's
Rc::new_cyclic() instead uses an rc::Weak. This is done to prevent
memory leaks rather than divergence.
This CL also resolves the following TODO from CL/6867:
// TODO: encapsulate this import weirdness in builtins
The main disadvantage of this CL is the fact that the VM now must
ensure that it holds a strong reference to the globals while a
program is executing; failure to do so will cause a panic when the
weak reference in the builtins is upgrade()d.
In theory it should be possible to create strong reference cycles
the same way Rc::new_cyclic() creates weak cycles, but these cycles
would cause a permanent memory leak -- without either an rc::Weak or
RefCell there is no way to break the cycle. At some point we will
have to implement some form of cycle collection; whatever library we
choose for that purpose is likely to provide an "immutable strong
reference cycle" primitive similar to Rc::new_cyclic(), and we
should be able to simply drop it in.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I34bb5821628eb97e426bdb880b02e2097402adb7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7097
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Rather than implementing all of the interesting semantics of value
comparison with a macro bound to the VM, implement the bulk of the logic
with a method on Value itself that returns an Ordering, and then use the
macro to implement the comparison against that Ordering. This has no
functional change, but paves the way to implementing lexicographic
comparison of list values, which is supported in the latest version of
upstream nix.
Change-Id: I8af1a020b41577021af5939f5edc160c407d4a9e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7069
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I played around a little bit with doing this in-place, but ended up
going with this perhaps slightly clone-heavy approach for now because
ideally most clones on Value are cheap - but later we should benchmark
alternate approaches that get to reuse allocations better if necessary
or possible.
Change-Id: If998eb2056cedefdf2fb480b0568ac8329ccfc44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7068
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The last bump in langVersion (5->6) in C++ Nix was due to making lists
comparable (commit `09471d2680292af48b2788108de56a8da755d661`), which
we support in Tvix with cl/7070.
Change-Id: Id3beed5150b8fb6e0a46a4d1b7e3942022a65346
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7074
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This commit implements builtins.currentSystem, by capturing the
cargo environment variable `TARGET` and exposing it to rustc as
`TVIX_CURRENT_SYSTEM` so it can be inserted into the source code
using `env!()`.
The resulting value needs to be massaged a bit, since it is an "LLVM
triple". The current code should work for all the platforms for
which cppnix works (thanks qyliss for generating the list!). It
does *not* reject all of the triples that cppnix's configure.ac
rejects -- it is much more forgiving. We can tighten this up in a
future commit.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I947f504b2af5a7fee8cf0cb301421d2fc9174ce1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6986
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Since we push arguments onto a stack when calling multi-argument
functions, we actually were ending up calling `call_with` with the
arguments in the *reverse order* - we patched around this by passing the
arguments in the reverse order for `foldl'`, but it makes more sense to
have them just be the order that the function would be called with in
user surface code instead.
Change-Id: Ifddb98f46970ac89872383709c3ce758dc965c65
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7067
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
These are builtins which can be basically implemented as the identity
function from the perspective of pure evaluation, and which help us
get closer to evaluating nixpkgs.
For now, builtins added here will be "usable" and just emit a warning
about not being implemented yet.
Change-Id: I0fce94677f01c98c0392aeefb7ab353c7dc7ec82
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7060
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This is done via a new `deepForce` function on Value. Since values can
be cyclical (for example, see the test-case), we need to do some extra
work to avoid RefCell borrow errors if we ever hit a graph cycle:
While deep-forcing values, we keep a set of thunks that we have
already seen and avoid doing any work on the same thunk twice. The set
is encapsulated in a separate type to stop potentially invalid
pointers from leaking out.
Finally, since deep_force is conceptually similar to
`VM::force_for_output` (but more suited to usage in eval since it
doesn't clone the values) this removes the latter, replacing it with
the former.
Co-Authored-By: Vincent Ambo <tazjin@tvl.su>
Change-Id: Iefddefcf09fae3b6a4d161a5873febcff54b9157
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7000
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Now that we're tracking formals on Lambda this ends up being quite easy;
we just pull them off of the Lambda for the argument closure and use
them to construct the result attribute set.
Change-Id: I811cb61ec34c6bef123a4043000b18c0e4ea0125
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7003
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Since we already have infra for forcing arguments to builtins, this ends
up being almost *too* simple - we just return the second argument!
Change-Id: I070d3d0b551c4dcdac095f67b31e22e0de90cbd7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6999
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Implement an *initial* version of builtins.match, using the rust `regex`
crate for regular expressions. The rust regex crate definitely has
different semantics than nix's regular expressions - but we'd like to
see how far we can get before the incompatibility starts to matter.
This consciously leaves out any sort of memo for compiled regular
expressions (which upstream nix also has) for the sake of expediency -
in the future we should implement that so we don't have to compile the
same regular expression multiple times.
Change-Id: I5b718635831ec83397940e417a9047c4342b6fa1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6989
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Using `serde_json` for parsing JSON here, plus an `impl FromJSON for
Value`. The latter is primarily to stay "dependency light" for now -
likely going with an actual serde `Deserialize` impl in the future is
going to be way better as it allows saving significantly on intermediary
allocations.
Change-Id: I152a0448ff7c87cf7ebaac927c38912b99de1c18
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6920
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Working on https://github.com/NixOS/nix/pull/7158, I discovered that C++
Nix actually is strict in the accumulator, just not in the first value.
This seems due to the fact that in the C++ evaluator, function calls
don't seem to be thunked unconditionally and foldl' just elects not to
wrap it in a thunk (don't quote me on this summary, even though it seems
to line up with the code for primop_foldlStrict and testable behavior).
It doesn't seem worth it to risk breaking the odd Nix expression just to
be strict in one more value per invocation of foldl' (i.e. the initial
accumulator value `nul`), so let's match the existing C++ Nix behavior
here.
Change-Id: If59e62271a90d97cb440f0ca72a58ec7840d1690
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7022
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This commit causes the test eval-okay-builtins.nix to pass.
It also adds tests/tvix_tests/eval-okay-dirof.nix which has better
coverage than the nix tests for this builtin.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I71d96b48680696fd6e4fea3a9861742b35cfaa66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6987
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This commit implements builtins.toPath. Like OP_ADD, it currently
does not handle string contexts.
This commit allows the
tests::nix_eval_okay_src_tests_nix_tests_eval_okay_pathexists_nix
test to pass.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Iadd4f7605f8f297adbd0dba187b8481c21370b6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6996
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This makes it easier to compare currently implemented ones with the full
list.
Change-Id: Ibaffd99d05afa15fc9ab644fd101afa24fc7a1b2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7008
Tested-by: BuildkiteCI
Autosubmit: j4m3s <james.landrein@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
This commit implements builtins.baseNameOf and adds a test case
eval-okay-basenameof.nix to the test suite.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: Ib8bbafba2ac9ca0e1d3dc5e844167f94890d9fee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6997
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
builtins.parseDrvName should not coerce its argument to a string.
This commit fixes that oversight in my previous commit, and adds an
xfail test to cover this condition.
Thanks to @sterni for noticing this.
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I76bc78f1a82e1e08fe5c787c563a221d55de2639
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6991
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This commit passes nix_eval_okay_src_tests_nix_tests_eval_okay_versions_nix.
See also: https://github.com/NixOS/nix/pull/7149
Signed-off-by: Adam Joseph <adam@westernsemico.com>
Change-Id: I24605c2a0cd0da434f37f6c518f20693bfa1b799
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6913
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
When investigating discrepancies between foldl' in tvix and C++ Nix,
I discovered that C++ Nix's foldl' doesn't seem to be strict at all.
Since this seemed wrong, I looked into Haskell's foldl' implementation
which doesn't force the list elements (`val` in our code), but the
accumulation value (`res` in our code). You can look at the code here:
https://hackage.haskell.org/package/base-4.17.0.0/docs/src/GHC.List.html#foldl%27
This actually makes a lot of sense: If `res` is not forced after each
application of `op`, we'll end up thunks nested as deeply as the list is
long, potentially taking up a lot of space. This can be limited by
forcing the `res` thunk before applying `op` again (and creating a new
thunk).
I've also PR-ed an equivalent change for C++ Nix at
https://github.com/NixOS/nix/pull/7158. Since this is not merged nor
backported to our Nix 2.3 fork, I've not copied the eval fail test yet,
since it wouldn't when checking our tests against C++ Nix in depot.
Change-Id: I34edf6fc3031fc1485c3e714f2280b4fba8f004b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6947
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
