"verify-store" is now simply an "--all" flag to "nix verify". This
flag can be used for any other store path command as well (e.g. "nix
path-info", "nix copy-sigs", ...).
For convenience, you can now say
$ nix-env -f channel:nixos-16.03 -iA hello
instead of
$ nix-env -f https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz -iA hello
Similarly,
$ nix-shell -I channel:nixpkgs-unstable -p hello
$ nix-build channel:nixos-15.09 -A hello
Abstracting over the NixOS/Nixpkgs channels location also allows us to
use a more efficient transport (e.g. Git) in the future.
Thus, -I / $NIX_PATH entries are now downloaded only when they are
needed for evaluation. An error to download an entry is a non-fatal
warning (just like non-existant paths).
This does change the semantics of builtins.nixPath, which now returns
the original, rather than resulting path. E.g., before we had
[ { path = "/nix/store/hgm3yxf1lrrwa3z14zpqaj5p9vs0qklk-nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
but now
[ { path = "https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
Fixes#792.
This specifies the number of distinct signatures required to consider
each path "trusted".
Also renamed ‘--no-sigs’ to ‘--no-trust’ for the flag that disables
verifying whether a path is trusted (since a path can also be trusted
if it has no signatures, but was built locally).
These are content-addressed paths or outputs of locally performed
builds. They are trusted even if they don't have signatures, so "nix
verify-paths" won't complain about them.
Typical usage is to check local paths using the signatures from a
binary cache:
$ nix verify-paths -r /run/current-system -s https://cache.nixos.org
path ‘/nix/store/c1k4zqfb74wba5sn4yflb044gvap0x6k-nixos-system-mandark-16.03.git.fc2d7a5M’ is untrusted
...
checked 844 paths, 119 untrusted
The flag remembering whether an Interrupted exception was thrown is
now thread-local. Thus, all threads will (eventually) throw
Interrupted. Previously, one thread would throw Interrupted, and then
the other threads wouldn't see that they were supposed to quit.
Unlike "nix-store --verify-path", this command verifies signatures in
addition to store path contents, is multi-threaded (especially useful
when verifying binary caches), and has a progress indicator.
Example use:
$ nix verify-paths --store https://cache.nixos.org -r $(type -p thunderbird)
...
[17/132 checked] checking ‘/nix/store/rawakphadqrqxr6zri2rmnxh03gqkrl3-autogen-5.18.6’
Doing a chdir() is a bad idea in multi-threaded programs, leading to
failures such as
error: cannot connect to daemon at ‘/nix/var/nix/daemon-socket/socket’: No such file or directory
Since Linux doesn't have a connectat() syscall like FreeBSD, there is
no way we can support this in a race-free way.
This enables an optimisation in hydra-queue-runner, preventing a
download of a NAR it just uploaded to the cache when reading files
like hydra-build-products.
This enables an optimisation in hydra-queue-runner, preventing a
download of a NAR it just uploaded to the cache when reading files
like hydra-build-products.
For example,
$ NIX_REMOTE=file:///my-cache nix ls-store -lR /nix/store/f4kbgl8shhyy76rkk3nbxr0lz8d2ip7q-binutils-2.23.1
dr-xr-xr-x 0 ./bin
-r-xr-xr-x 30748 ./bin/addr2line
-r-xr-xr-x 66973 ./bin/ar
...
Similarly, "nix ls-nar" lists the contents of a NAR file, "nix
cat-nar" extracts a file from a NAR file, and "nix cat-store" extract
a file from a Nix store.
This allows a RemoteStore object to be used safely from multiple
threads concurrently. It will make multiple daemon connections if
necessary.
Note: pool.hh and sync.hh have been copied from the Hydra source tree.
This is currently only used by the Hydra queue runner rework, but like
eff5021eaa it presumably will be useful
for the C++ rewrite of nix-push and
download-from-binary-cache. (@shlevy)
Also, move a few free-standing functions into StoreAPI and Derivation.
Also, introduce a non-nullable smart pointer, ref<T>, which is just a
wrapper around std::shared_ptr ensuring that the pointer is never
null. (For reference-counted values, this is better than passing a
"T&", because the latter doesn't maintain the refcount. Usually, the
caller will have a shared_ptr keeping the value alive, but that's not
always the case, e.g., when passing a reference to a std::thread via
std::bind.)
For example,
$ nix-build --hash -A nix-repl.src
will build the fixed-output derivation nix-repl.src (a fetchFromGitHub
call), but instead of *verifying* the hash given in the Nix
expression, it prints out the resulting hash, and then moves the
result to its content-addressed location in the Nix store. E.g
build produced path ‘/nix/store/504a4k6zi69dq0yjc0bm12pa65bccxam-nix-repl-8a2f5f0607540ffe56b56d52db544373e1efb980-src’ with sha256 hash ‘0cjablz01i0g9smnavhf86imwx1f9mnh5flax75i615ml71gsr88’
The goal of this is to make all nix-prefetch-* scripts unnecessary: we
can just let Nix run the real thing (i.e., the corresponding fetch*
derivation).
Another example:
$ nix-build --hash -E 'with import <nixpkgs> {}; fetchgit { url = "https://github.com/NixOS/nix.git"; sha256 = "ffffffffffffffffffffffffffffffffffffffffffffffffffff"; }'
...
git revision is 9e7c1a4bbd
...
build produced path ‘/nix/store/gmsnh9i7x4mb7pyd2ns7n3c9l90jfsi1-nix’ with sha256 hash ‘1188xb621diw89n25rifqg9lxnzpz7nj5bfh4i1y3dnis0dmc0zp’
(Having to specify a fake sha256 hash is a bit annoying...)
Previously files in the Nix store were owned by root or by nixbld,
depending on whether they were created by a substituter or by a
builder. This doesn't matter much, but causes spurious diffoscope
differences. So use root everywhere.
E.g.
$ nix-build pkgs/stdenv/linux/ -A stage1.pkgs.perl --check
nix-store: src/libstore/build.cc:1323: void nix::DerivationGoal::tryToBuild(): Assertion `buildMode != bmCheck || validPaths.size() == drv->outputs.size()' failed.
when perl.out exists but perl.man doesn't. The fix is to only check
the outputs that exist. Note that "nix-build -A stage1.pkgs.all
--check" will still give a (proper) error in this case.
This was observed in the deb_debian7x86_64 build:
http://hydra.nixos.org/build/29973215
Calling c_str() on a temporary should be fine because the temporary
shouldn't be destroyed until after the execl() call, but who knows...
If repair found a corrupted/missing path that depended on a
multiple-output derivation, and some of the outputs of the latter were
not present, it failed with a message like
error: path ‘/nix/store/cnfn9d5fjys1y93cz9shld2xwaibd7nn-bash-4.3-p42-doc’ is not valid
Also show types when nix cannot compare values of different types.
This is also more consistent since types are already shown when comparing values of the same not comparable type.
For example, "${{ foo = "bar"; __toString = x: x.foo; }}" evaluates
to "bar".
With this, we can delay calling functions like mkDerivation,
buildPythonPackage, etc. until we actually need a derivation, enabling
overrides and other modifications to happen by simple attribute set
update.
This makes Darwin consistent with Linux: Nix expressions can't break
out of the sandbox unless relaxed sandbox mode is enabled.
For the normal sandbox mode this will require fixing #759 however.
Otherwise, since the call to write a "d" character to the lock file
can fail with ENOSPC, we can get an unhandled exception resulting in a
call to terminate().
Caused by 8063fc497a. If tmpDir !=
tmpDirInSandbox (typically when there are multiple concurrent builds
with the same name), the *Path attribute would not point to an
existing file. This caused Nixpkgs' writeTextFile to write an empty
file. In particular this showed up as hanging VM builds (because it
would run an empty run-nixos-vm script and then wait for it to finish
booting).
This is arguably nitpicky, but I think this new formulation is even
clearer. My thinking is that it's easier to comprehend when the
calculated hash value is displayed close to the output path. (I think it
is somewhat similar to eliminating double negatives in logic
statements.)
The formulation is inspired / copied from the OpenEmbedded build tool,
bitbake.
Rather than using $<host-TMPDIR>/nix-build-<drvname>-<number>, the
temporary directory is now always /tmp/nix-build-<drvname>-0. This
improves bitwise-exact reproducibility for builds that store $TMPDIR
in their build output. (Of course, those should still be fixed...)
edolstra:
“…since callers of readDirectory have to handle the possibility of
DT_UNKNOWN anyway, and we don't want to do a stat call for every
directory entry unless it's really needed.”
The nixpkgs manual prescribes the use of values from stdenv.lib.licenses
for the meta.license attribute. Those values are attribute sets and
currently skipped when running nix-env with '--xml --meta'. This has the
consequence that also nixpkgs-lint will report missing licenses.
With this commit nix-env with '--xml --meta' will print all attributes
of an attribute set that are of type tString. For example the output for
the package nixpkgs.hello is
<meta name="license" type="strings">
<string type="url" value="http://spdx.org/licenses/GPL-3.0+" />
<string type="shortName" value="gpl3Plus" />
<string type="fullName" value="GNU General Public License v3.0 or later" />
<string type="spdxId" value="GPL-3.0+" />
</meta>
This commit fixes nixpkgs-lint, too.
Temporarily allow derivations to describe their full sandbox profile.
This will be eventually scaled back to a more secure setup, see the
discussion at #695
Nix reports a hash mismatch saying:
output path ‘foo’ should have sha256 hash ‘abc’, instead has ‘xyz’
That message is slightly ambiguous and some people read that statement
to mean the exact opposite of what it is supposed to mean. After this
patch, the message will be:
Nix expects output path ‘foo’ to have sha256 hash ‘abc’, instead it has ‘xyz’
- rename options but leav old names as lower-priority aliases,
also "-dirs" -> "-paths" to get closer to the meaning
- update docs to reflect the new names (old aliases are not documented),
including a new file with release notes
- tests need an update after corresponding changes to nixpkgs
- __noChroot is left as it is (after discussion on the PR)
Passing "--option build-repeat <N>" will cause every build to be
repeated N times. If the build output differs between any round, the
build is rejected, and the output paths are not registered as
valid. This is primarily useful to verify build determinism. (We
already had a --check option to repeat a previously succeeded
build. However, with --check, non-deterministic builds are registered
in the DB. Preventing that is useful for Hydra to ensure that
non-deterministic builds don't end up getting published at all.)
This reverts commit 79ca503332. Ouch,
never noticed this. We definitely don't want to allow builds to have
arbitrary access to /bin and /usr/bin, because then they can (for
instance) bring in a bunch of setuid programs. Also, we shouldn't be
encouraging the use of impurities in the default configuration.
If automatic store optimisation is enabled, and a hard-linked file in
the store gets corrupted, then the corresponding .links entry will
also be corrupted. In that case, trying to repair with --repair or
--repair-path won't work, because the new "good" file will be replaced
by a hard link to the corrupted file. We can catch most of these cases
by doing a sanity-check on the file sizes.
> I made this change for two reasons:
> 1. Darwin's locale data doesn't appear to be open source
> 2. Privileged processes will always use /usr/share/locale regardless of environment variables
