previously, depot-scanner swallowed/ignored all non-processed
stderr output of nix-instantiate, which makes diagnosing
failures of nix-instantiate (e.g. failed with exit status 1)
difficult. This commit fixes that by always forwarding
the remaining stderr messages.
Example previous error message:
panic: nix-instantiate failed: exit status 1
goroutine 1 [running]:
main.main()
/nix/store/8vb2j13bd7j5ipl7dhsnwvgr7nrrsqsi-main.go:160 +0xeb4
Example new error message:
nix-inst> error: unrecognised flag '--trace-file-access'
nix-inst> Try '/run/current-system/sw/bin/nix-instantiate --help' for more information.
panic: nix-instantiate failed: exit status 1
goroutine 1 [running]:
main.main()
/nix/store/qy7v79a3harddirzmc0432vbzqhyf91i-main.go:165 +0xeb4
Change-Id: I666f3490fc648f77a5384b95edd74f6115f7920d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4553
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Right now this only includes Go, but more is to come.
Change-Id: Idd8fc27c0eb25e82688ef8337ba20810d834f4b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4504
Reviewed-by: zseri <zseri.devel@ytrizja.de>
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
(zseri:) It seems like relativePath should be replaced with relativeFlag,
as no variable with the former name exists, a boolean is as far as I can
tell expected, and a boolean with a similar name exists. Lets give it a
try in the CI.
Change-Id: I0e7e522a41a517a38222dcda3b66731344613c1e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3581
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Prompting with "Checkout CL" for the gerrit cherry-pick command doesn't
make any sense.
Change-Id: I51495e7975202146fae2da0807e525596f2d490e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4516
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Right now the only included formatter is gofmt, but we will extend
this over time.
The version of treefmt is bumped to 0.3.0 (which supports custom
config files) until this lands in nixpkgs.
Change-Id: I1e1aafd05ec7427c616f90c90490c528ecb2615c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4399
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
All targets would have no trailing slash, so it was at least ugly that
// had one as the only legal target.
Change-Id: I1b60850ac86d8c550f262841694fb00c518413b8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4404
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
r/3000 will now be shortlinked to show the commit in cgit. Going via
atward probably doesn't make sense at this point, since the depot refs
are not available in sourcegraph at all (for reasons I can't
repeat). Switching to atward might be interesting when/if we introduce
support for shortlinking // paths.
Fixes: b/163
Change-Id: I57c1a7d02d881e4f8b3ee1f71755dd7930925dc4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4402
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
for global installations of magrathea, setting MG_ROOT can be a way to
switch quickly between different repositories (esp. in combination
with `cd (mg path)`).
Change-Id: I4627fe78b7cc112b75ab57e7806ffd85c6d38aee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4396
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
this command prints the absolute directory for a given target. it can
be combined with shell aliases to add quick navigation commands.
unfortunately due to the nature of computers implementing something
like `mg cd` directly is not possible.
Change-Id: Icc88eb97384812c620c49fe2de8fa331f4d7153b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4395
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
magrathea now does what it says on the tin - build and shell commands
can be used with the targets specified on the command line.
implementation notes:
* string representation of target has been changed to look like the
target spec format, this is now used in user-facing messages
* errors returned by the target parser make the program exit with
status 1
* normalisation could be done better (for example, maybe it makes
sense to always do it) but it's good enough for now
Change-Id: Ib85f389a5cec92b3c2f3b9c0b40764435bbcc68b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4394
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
i'm not sure what happened here, but it works (yes, the fancy target
printing is completely unnecessary, but oh well):
#;152> (parse-target "foo")
#target(foo)
#;153> (parse-target "//foo")
#target(//foo)
#;154> (parse-target "//foo/bar")
#target(//foo/bar)
#;155> (parse-target "//foo/bar/")
#target(//foo/bar)
#;156> (parse-target "//foo/bar:baz")
#target(//foo/bar:baz)
#;157> (parse-target "//foo/bar/:baz")
#target(//foo/bar:baz)
#;158> (parse-target "//foo/bar:")
(error . "unexpected end of input while parsing virtual target")
#;159> (parse-target "//foo//")
(error . "unexpected root-anchor while parsing normal target")
the most notable thing is that trailing slashes are allowed in the
physical targets, since people may be autocompleting these on the
shell from folder names.
Change-Id: I32975ad77fe2a327130dc9574011fe92cce49f84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4393
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
this is going to be a serious version of //tools/depot-build.
right now it doesn't support parsing any target specs yet, so only
shells and builds for the physical project of the current folder work.
Change-Id: I4308e29da940571622ff9e539fbb8ededd27aca7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4335
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
as before, fifth doesn't exist on all emacsen, but nth definitely does
Change-Id: Ic0e4e3790402d960d1546d37187758a4d9ca33c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4346
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The l= is part of the command, not of the shape of commands, and the
previous command concatenation logic was wrong because of that.
Fix is done in the most obvious way: Make the l= part of the command.
Change-Id: Ia3c08c3da60fe5fc38f29a2d94adcd123e4f3052
This makes this function a true rubberstamp again, leading to
rubberstamped CLs automatically being merged after CI passes.
This is similar to the initial functionality we had last year, where
this directly submitted changes, but with the addition of the CI
checks.
Change-Id: I946b074b968eb18a64c4edb0043f7a4af28759b4
This almost makes for a sort of fire&forget button, except we don't
have a way to automatically pick reviewers yet :)
Change-Id: I6f446270f8aaf0409ccb6321bdbb5c349079cd19
Bound to `A g`, this behaves similarly to `magit-gerrit-checkout` - it
prompts for a CL number, then cherry-picks the latest patchset of that
CL number
Change-Id: Ieef970b99d96170e8c960cc7687ead9022948f8b
Adds all the functionality described in the README in cl/4066.
This code is very closely related to //users/tazjin/russian/russian.el
Change-Id: I14f1052cebfbe4886e75e8efc730eacbf8773f29
Passively is a tool to help people learn information via Emacs,
designed for language learning.
As of this CL, the actual implementation still lives in
//users/tazjin/russian/russian.el but I am generalising it here.
Change-Id: Iac5a8cfc78415496637a7ba5ddc4c2a1aa6bee26
This function is also generally useful for readTree consumers that
have the concept of subtargets.
Change-Id: Ic7fc03380dec6953fb288763a28e50ab3624d233
Add a new magit-gerrit-checkout command, which prompts for a CL number
then fetches and checks out the latest patchset of that CL with a
detached HEAD.
Change-Id: I88b8209d40017479d97ed40ecbd5fd1ccd7cf650
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3880
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
`our-crates` can just check if the attributes in question are
derivation (i. e. have an `outPath`) instead of blacklisting the
`__readTree` attribute specifically.
Change-Id: I472692e89c0e9eff551372c72a73ab765b0b6599
This makes it possible for users of cheddar as a library to supply
their own shortlinks. In practice it is unlikely anyone will do this,
but the change also allows us to (relatively) easily add additional
shortlinks to the set used by TVL.
Note that Cheddar is primarily intended for use by TVL and the default
rendering function interfaces have not changed, and will default to
using TVL shortlinks.
A new public function `format_markdown_with_shortlinks` has been added
with which users can use an alternative set of shortlinks. This
function should not be used in TVL depot code.
Change-Id: I4ddab28cbcf45d07c51323b7b730b96e62922816
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3083
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
This fixes all compilation warnings except the one about 'tvl lacking
a parent group, which we can look into later (it doesn't matter that much).
Change-Id: Iaff5e7f5f251f0670afb0a47031ccf197de69818
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3408
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
I'm using gerrit at work now, and would like to use tvl.el to interact
with it via Emacs, but we use a different default branch than "canon".
This makes it configurable, and also marks it as safe so I can configure
it in .dir-locals.el
Change-Id: I66d4c7ce94351f2df863ec49dbc3e1d1d6d1547a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3369
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Very simplistic tool to aid with updating our nixpkgs channel pins:
This tool prints the correct two `*Hashes` sets to stdout, so you can
easily delete the appropriate lines in `third_party/nixpkgs/default.nix`,
run
./bin/depot-nixpkgs-update | wl-copy
and paste it into your editor.
Doing this fully automatically would be possible, but would either
a) require changing `default.nix`, so it is regex-able more easily,
b) touching something like rnix-parser which I have no motivation to
at the moment or
c) searching for the old hashes and replacing them with the new
ones. This may be a simple and worthwhile improvement in the future.
Change-Id: I4df44e3827ce9ff6e4fe2d336c08016d799e21a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3252
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
* users/grfn/system/home/yeren: remove obsolete awscli2 overrides
* ops: make new isSystemUser || isNormalUser assertion happy
* users/grfn/system/system/mugwump: make buildkite agents system users
* users/tazjin/nixos/camden: set isSystemUser = true for git
* users/tazjin/emacs: Remove missing & broken packages
* third_party/openldap: remove, as the argon2 module is now enabled upstream
* third_party/gerrit_plugins: Pinned new unstable hashes
* third_party/nix, third_party/grpc: Disabled CI as these are broken
* third_party/overlays/emacs: Bumped version to stay in sync with channel
* third_party/buzz: Update LIBCLANG_PATH to reference libclang.lib,
since libclang's default output no longer contains libclang.so
* users/grfn/system/home: Install julia-stable instead of julia (which
aliases to julia-lts), as the latter depends on an insecure version of
libgit
Change-Id: Iff33b0ecb0ef07a82d1de35e23c40d2f4bf0f8ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3001
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
* This was mostly for //third_party/nix and its dependencies which now
have been set to use llvmPackages_11 manually.
* For //users/grfn/achilles we also manually select the newer LLVM version.
* //tools/cheddar doesn't seem to need llvm anymore.
* //third_party/buzz also compiles with clang 7.1.0
* replace clang-tools everywhere with new attribute clang-tools_11
For the future we may want to have something similar again, but it may
not be necessary to invest too much time into it: nixpkgs is set to
upgrade their default llvmPackages to LLVM 11 as well at some point in
the near future.
Co-Authored-By: sterni <sternenseemann@systemli.org>
Change-Id: Id83868dbc476a6c776b59518b856c933f30ea79d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3135
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
This is fixed in upstream nixpkgs, but we're not yet at a commit where
it's used, so it's important to use the OpenLDAP from //third_party
Change-Id: I7c033cd23f45a95c4a4af864ffe561c496833a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3143
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We have a bunch of crates in `third_party/rust-crates`; it would be
great if we could check them for existing CVEs.
This tool does that, it takes the rust security advisory database,
parses the applicable CVEs, and cross-checks them against the actual
crate versions we list in our package database.
The dumb parser we wrote is tested against all entries in the
database, so we will notice when upstream breaks their shit.
Checking the semver stuff is easy enough with the semver crate.
If an advisory matches, it prints the whole thing and fails the build.
Change-Id: I9e912c43d37a685d9d7a4424defc467a171ea3c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2818
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Implements highlighting of shortlinks like cl/123, or b/123.
Highlighting works by replacing the input Markdown using a simple
regular expression replacement.
We also considered parsing and replacing these links in the Markdown
AST, but it would have been significantly more complex (due to arena
allocation) for little upside and no obvious performance benefit.
Change-Id: I53f03fb17491046d89d0b7f605929571c11ee9a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3082
Tested-by: BuildkiteCI
Reviewed-by: eta <eta@theta.eu.org>
The BAT_SYNTAXES environment variable is injected during Nix builds
and points to the build result of //third_party/bat_syntaxes, which is
included in the cheddar binary.
During development this is a bit annoying: Opening a Nix shell will
set the right variable, but it will also mess with the Cargo
environment in ways that make it annoying to use (*and* require a
pre-build of all dependencies as required by naersk).
For an easier development flow, this adds a build script that
automatically runs Nix, fetches the path to the syntax set and sets
the environment variable. It is a no-op if the variable is already
set.
This makes for a smoother development experience when working on
cheddar in a depot checkout.
Change-Id: Ib5435518897e3443247edd9f362821c0b9ff756b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3081
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Splits `main.rs` into `lib.rs` and `bin/cheddar.rs`, which enables
reuse of cheddar's rendering logic in other Rust applications.
Change-Id: Ifd1a44a8d1620c595550a0a497a25b0563e917ca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3060
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Adds a new internal builder that makes it possible to override the
`emacsPackages` passed to our Emacs packages, which in turn makes it
possible to inject them into the emacsPackages fixpoint and use them
with features like Emacs native compilation.
Change-Id: I80dad57115c83cf5693ae6ba4e4cf3105d103d5e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3003
Tested-by: BuildkiteCI
Reviewed-by: adisbladis <adisbladis@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Rename my //users directory and all places that refer to glittershark to
grfn, including nix references and documentation.
This may require some extra attention inside of gerrit's database after
it lands to allow me to actually push things.
Change-Id: I4728b7ec2c60024392c1c1fa6e0d4a59b3e266fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2933
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: glittershark <grfn@gws.fyi>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
Change-Id: I49d82726b2f3bd7d4923effdd9a7e3f67ddc0659
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2916
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
This commit cleans up a huge chunk of these uses in //third_party
Change-Id: Ic382c0cdea7330a84d5f0b7d109c824ddceb94e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2912
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This chops off "front matter", which we have - for example - in Tvix
documentation that is rendered through Pandoc.
Change-Id: I65c7a4ad8171423a50aaf47c046dab8c774346d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2717
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Covers some of the odd things we do, specifically callouts and code
rendering.
Change-Id: Ib8542373b434b53d277b0d8c9ddb78ac7c5176a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2689
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
I've been running a script similar to this after doing Gerrit version
bumps to make sure the schema is up to date, but in the spirit of making
sure someone other that myself can do this task I'm formalising it into
the depot, where I should've put it in the first place.
Change-Id: I50a198e798e2ff26989b01e4bdd0571d85ab62aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2203
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
It was only used for #'-each, for which the built-in dolist is sufficient.
Change-Id: I326d8b733b36b2edfebd4e9384e70b8a570fee0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1987
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
