this moved out of whitby some time ago (to koptevo.tazj.in), but is
now causing failures because of ACME cert renewal
Change-Id: I4da5512db0d85d416511a1d10f784e978c5ccc93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8948
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
this never worked and was never used, but for now the module itself is
still around in case somebody wants it for something
Change-Id: Id8e449e08c8012786bca0ea57d9c7b97056a1f3d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8905
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This runs a headscale server on sanduny which lets users join their
machines to the TVL tailscale network.
This would theoretically let people communicate with each other on the
internal network, but also more notably joined servers can advertise
exit node capability so that we can have our own "VPN network", for
starters with endpoints in Germany, UK and Russia (whitby, sanduny and
koptevo respectively).
This setup isn't fully stable yet, notably:
* The IP range used by tailscale is just the default one right now,
I'm not sure if that should be changed or what.
* The system is stateful (on sanduny), but the state is not (yet)
backed up anywhere. Use with caution.
* Machine joining is a manual process requiring SSH & root access to
sanduny.
The process is to log in to sanduny, then get a headscale shell with
`sudo -u headscale bash`, and to use the `headscale` CLI within
there to administrate access.
I've opted to create a user account `tvl` for TVL-owned machines,
and a personal account for myself and my machines.
Change-Id: I4f1be1fe8062a6c2e77203ff72fe8709f4e4dec8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8837
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Whitby has a lot of memory, but I've still been fighting with the OOM
Killer trying to build a few big packages at the same time. Besides,
it's generally a good idea to always have swap available even if
there's lots of memory for caching optimisation reasons[1], and zram
swap is efficient enough to basically provide bonus memory for free.
[1]: https://haydenjames.io/linux-performance-almost-always-add-swap-space/
Change-Id: I1fbe60f7975ebfa38e341e0de76848ec79b6fcf0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8065
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is a follow up to cl/7191 which neglected to adjust the
status.tvl.su.nix module and re-enable it.
Change-Id: Icc1917004cd50e5eab61a29bc68b393ba9bd6325
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7226
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Uncomment and update the grafana config for whitby based on the new
config format that nixos accepts. I've validated this locally by
visually inspecting the resulting `ini` file, but not actually run it
yet.
Change-Id: I12d78ae48146e1b01bd2a4152276d4c6b16c1a3d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7191
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
* //ops/machines/whitby: Disable grafana, since the grafana module was
changed upstream in a way that our configuration no longer works.
Since the OpenSSL security update is relatively pressing, adapting the
grafana configuration beforehand is not a hard requirement. See
https://github.com/NixOS/nixpkgs/pull/191768.
* //tools/depotfmt: keep Go at version 1.18 to forgo a reformat of the
tree.
* //nix/buildGo: keep Go at version 1.18, as 1.19 changed the CLI
interface (?) in a way that breaks buildGo.
* //3p/overlays/tvl: drop upstreamed tdlib upgrade.
* //3p/overlays/tvl: patch buf to work around breakage due to git 2.38.1
TODO items for Go are tracked in b/215.
Change-Id: Ie08fef49cf3db12e6b5225a8b992a990ddc5b642
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7141
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
on whitby, cgit runs as the gerrit user to get access to serving
gerrit's repositories directly.
on other machines (e.g. sanduny) this isn't necessary, as we have a
world-readable depot replica.
Change-Id: Ibf7e7cc08e5909e0fa182e561ab0cb472188edcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5932
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
this configures gerrit's built-in replication plugin to push every
change in depot to sanduny.
this allows us to serve a replica of depot from sanduny.
manual config that was needed which needs to be automated:
* system-wide known_hosts does not work, needed one in /var/lib/git
* .ssh/config MUST be present and configured for sanduny.tvl.su
Change-Id: Iba399f2328abb5acb65dae19a36e265eea0952ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5915
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
It occured to me yesterday that with the config inside of the module
it is kind of difficult to test cgit locally.
This moves it back to a separate location (//web/cgit-tvl) and makes
the most important things configurable via overrides.
Change-Id: I9b0f4c60b75c31441e1718e63b5b55aba3100aae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5893
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The new version brings the new secretsDir setting which means we no
longer have to hardcode /run/agenix everywhere.
Change-Id: I4b579d7233d315a780d7671869d5d06722d769fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5646
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Changes:
* updated keycloak configuration for new version
* migrate to emacs28 outside of //users, re-add emacs27 but with a
warning attached urging people to migrate
Change-Id: I3e5765a63934541f72f6c4a8673d3b4671850c93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5501
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: wpcarro <wpcarro@gmail.com>
As suggested by sterni, this makes the self-redirect of a machine to
its configuration a generic module working by convention.
In the process of moving this two small fixes have been applied:
* redirect is only applied if the URI is `/`, this is required for
ACME to work
* addSSL = true is added, otherwise we have a certificate but no TLS
listener
Change-Id: Icaef041ff681253a61e36926417bdb2844e3f93d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5313
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes the journaldriver configuration machine-independent.
The secret is loaded from agenix instead of being persisted on disk.
Change-Id: I592ae7f5726fcb7f37a406f69dcf5ac498eeb1b7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5302
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change, entering just "whitby.tvl.fyi" or "sanduny.tvl.su"
in a browser will redirect users to their machine configurations.
Change-Id: Ibf076a469bcce073e1b1970aa568d6fe16a5c75a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5304
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
This needs to be present on all machines that run ACME stuff.
I've switched the address for a .su one because I have a catchall for
these.
Change-Id: I7af8e1f1cb2fcfbcba4b7d1930ed0edef0106d72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5306
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Rather than defining all system users inline on whitby, move them into
a module that can be imported on multiple machines.
Configuration for terminfos that we've added follows along.
Note that while doing this I've disabled logins for riking and isomer
since they are currently inactive in TVL.
Change-Id: Id18031d355afc34079c5e6e49dc6943e61809a8f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5298
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
cgit has its own module now
Change-Id: I9b4cc322374517b8bd3db43345831e2bf43c4bb1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5295
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The ancient `//web/cgit-taz` path stems from the time I had
code.tazj.in serving my initial version of the depot.
I've been meaning to clean this up for forever, so here we go.
Note that this leaves the git-serving module in a strange state where
it only deals with josh. I'll rename it accordingly.
Change-Id: I47ed1e9d90958299b5440a18a1b9075274754e33
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5294
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
* //nix/buildLisp: re-enable CCL, as the crash has been fixed upstream,
although it is unclear what exactly caused / fixed it.
* //ops/whitby: the kitty build broke upstream, so we can't install the
terminfo on whitby for a bit.
Change-Id: I5710acbe837fbc936e334b2e81f9cf00ed6ae280
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5274
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is necessary for the nginx prometheus exporter to work
Change-Id: I2343d6f5d3d6d6772777d5e14426a537aa1c8ef7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5127
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
Might be nice to look at rates of requests etc.
Change-Id: I4d12ab0c1a555793e803de4a9614e616951a94e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5125
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Adds more things I keep using via nix-shell, as well as the
deploy-whitby script (which is independent of a particular depot
checkout).
Change-Id: I36f87de7645768a05268c90ba9b3ab833bacca05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4881
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The intent is to configure oauth2_proxy pointing at Keycloak to enable
usage with nginx auth_request directives.
I want to expose this as a function from within the module in which
nginx server configuration blocks can be wrapped, but the function for
that is currently a placeholder.
Change-Id: I5ed7deb9bf1c62818f516e68c33e8c5b632fccfe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4767
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
It looks like we won't need this for oauth2_proxy when combined with
nginx auth_request setups.
Change-Id: I2294aee6226b4f64a27bf6592c2d18092d0268cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4766
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Grafana was still pointing at the (now non-existent) CAS setup. This
changes the endpoints to use Keycloak instead and updates the client
secret.
Change-Id: Ib25d38330aba2ef6d894e8c33d86852c884ab5be
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4706
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Note that the login.tvl.fyi WWW configuration is still kind of hanging
around until we've settled where Keycloak lives.
Change-Id: Iaca4e394a7371cafa3716ca66ef09c4eca5b1520
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4626
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Gerrit has OAuth2 and email related secrets which now live in agenix
instead of a random file on disk.
Change-Id: I6220fbb7a2e2ec0102a900b4bcf6150b8b4d32ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4612
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Trialing this as an alternative to CAS that is a little easier to
configure and can help us delegate authentication to other OIDC
services.
Change-Id: Iad63724d349334910af8fed0b148e4ba428f796b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4608
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
For modules that are gated behind a mkEnableOption, it's reasonable to
just provide them to all Depot-built nixos systems without requiring
people to explicitly import them. This defines a special module called
`default-imports.nix` which imports these modules (currently just
tvl-cache.nix and automatic-gc.nix, as I'm being rather conservative
adding things here to avoid breaking anyone's system), then provides
that module as one of the `modules` passed at the top-level
nixos/eval-config invocation.
Change-Id: I3be299ab10ae4c451ef11c514edb3c89318a2278
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4345
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
Currently in NixOS configuration using agenix secrets there is no
build time validation of secret paths - things fail at runtime (system
activation).
To prevent that, this CL makes the secrets part of the tree based on
the same configuration file used by agenix itself.
This guards against:
* agenix secrets.nix definition for a non-existent file
* age.secrets value in a NixOS config for a non-existent secret
Change-Id: I5b191dcbd5b2522566ff7c38f8a988bbf7679364
