Commit graph

290 commits

Author SHA1 Message Date
Eelco Dolstra
e0234dfddc Rename Makefile -> local.mk 2014-01-30 12:11:06 +01:00
Eelco Dolstra
b4c684e0f9 Update Makefiles 2014-01-09 16:53:47 +01:00
Eelco Dolstra
7ce0e05ad8 Rename Makefile.new -> Makefile 2013-11-25 15:25:13 +00:00
Eelco Dolstra
2bd0fcc966 Use libnix as a prefix for all Nix libraries
In particular "libutil" was always a problem because it collides with
Glibc's libutil.  Even if we install into $(libdir)/nix, the linker
sometimes got confused (e.g. if a program links against libstore but
not libutil, then ld would report undefined symbols in libstore
because it was looking at Glibc's libutil).
2013-11-23 23:53:41 +00:00
Eelco Dolstra
90dfb37f14 Allow (dynamic) libraries to depend on other libraries 2013-11-23 20:11:02 +00:00
Eelco Dolstra
6dd74b48f8 Support building dynamic libraries 2013-11-22 20:56:58 +00:00
Eelco Dolstra
6b5f89f2cf Drop the dependency on Automake 2013-11-22 19:30:24 +00:00
Eelco Dolstra
754c05ed6c Rename $(here) to $(d) for brevity, and remove trailing slash 2013-11-22 16:45:52 +00:00
Eelco Dolstra
b8e9efc476 New non-recursive, plain Make-based build system 2013-11-22 15:54:18 +01:00
Eelco Dolstra
a478e8a7bb Remove nix-setuid-helper
AFAIK, nobody uses it, it's not maintained, and it has no tests.
2013-11-14 11:57:37 +01:00
Eelco Dolstra
f53574ebd6 RestoreSink: Slightly reduce the number of concurrent FDs 2013-09-17 12:06:59 +00:00
Eelco Dolstra
936f9d45ba Don't apply the CPU affinity hack to nix-shell (and other Perl programs)
As discovered by Todd Veldhuizen, the shell started by nix-shell has
its affinity set to a single CPU.  This is because nix-shell connects
to the Nix daemon, which causes the affinity hack to be applied.  So
we turn this off for Perl programs.
2013-09-06 16:36:56 +02:00
Ivan Kozik
34bb806f74 Fix typos, especially those that end up in the Nix manual 2013-08-26 11:15:22 +02:00
Eelco Dolstra
d308aeaf53 Store Nix integers as longs
So on 64-bit systems, integers are now 64-bit.

Fixes #158.
2013-08-19 12:35:03 +02:00
Eelco Dolstra
161a2ccf7a Fix build on non-Linux
http://hydra.nixos.org/build/5662914
2013-08-07 17:26:41 +02:00
Eelco Dolstra
a583a2bc59 Run the daemon worker on the same CPU as the client
On a system with multiple CPUs, running Nix operations through the
daemon is significantly slower than "direct" mode:

$ NIX_REMOTE= nix-instantiate '<nixos>' -A system
real    0m0.974s
user    0m0.875s
sys     0m0.088s

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m2.118s
user    0m1.463s
sys     0m0.218s

The main reason seems to be that the client and the worker get moved
to a different CPU after every call to the worker.  This patch adds a
hack to lock them to the same CPU.  With this, the overhead of going
through the daemon is very small:

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m1.074s
user    0m0.809s
sys     0m0.098s
2013-08-07 14:02:04 +02:00
Shea Levy
e87d1a63bd killUser: Don't let the child kill itself on Apple
The kill(2) in Apple's libc follows POSIX semantics, which means that
kill(-1, SIGKILL) will kill the calling process too. Since nix has no
way to distinguish between the process successfully killing everything
and the process being killed by a rogue builder in that case, it can't
safely conclude that killUser was successful.

Luckily, the actual kill syscall takes a parameter that determines
whether POSIX semantics are followed, so we can call that syscall
directly and avoid the issue on Apple.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-07-30 21:25:16 +02:00
Eelco Dolstra
aeb810b01e Garbage collector: Don't follow symlinks arbitrarily
Only indirect roots (symlinks to symlinks to the Nix store) are now
supported.
2013-07-12 14:03:36 +02:00
Eelco Dolstra
22144afa8d Don't keep "disabled" substituters running
For instance, it's pointless to keep copy-from-other-stores running if
there are no other stores, or download-using-manifests if there are no
manifests.  This also speeds things up because we don't send queries
to those substituters.
2013-06-20 11:55:15 +02:00
Eelco Dolstra
5959c591a0 Process stderr from substituters while doing have/info queries 2013-06-07 15:02:14 +02:00
Eelco Dolstra
3007f57377 Remove tabs 2013-01-03 13:00:46 +01:00
Eelco Dolstra
def5160b61 Clear any immutable bits in the Nix store
Doing this once makes subsequent operations like garbage collecting
more efficient since we don't have to call makeMutable() first.
2013-01-03 12:59:23 +01:00
Eelco Dolstra
46a369ad95 Make "nix-build -A <derivation>.<output>" do the right thing
For example, given a derivation with outputs "out", "man" and "bin":

  $ nix-build -A pkg

produces ./result pointing to the "out" output;

  $ nix-build -A pkg.man

produces ./result-man pointing to the "man" output;

  $ nix-build -A pkg.all

produces ./result, ./result-man and ./result-bin;

  $ nix-build -A pkg.all -A pkg2

produces ./result, ./result-man, ./result-bin and ./result-2.
2012-11-26 15:39:10 +01:00
Eelco Dolstra
8541d27fce Don't use std::cerr in a few places
Slightly scared of using std::cerr in a vforked process...
2012-11-15 15:01:02 +01:00
Eelco Dolstra
3acc8adcad Add some debug code 2012-11-15 13:55:02 +01:00
Eelco Dolstra
ea89df2b76 Use vfork() instead of fork() if available
Hopefully this reduces the chance of hitting ‘unable to fork: Cannot
allocate memory’ errors.  vfork() is used for everything except
starting builders.
2012-11-09 18:00:33 +01:00
Eelco Dolstra
198dbe7fa1 Remove some redundant close() calls
They are unnecessary because we set the close-on-exec flag.
2012-11-09 16:58:51 +01:00
Eelco Dolstra
10dcee99ed Remove the quickExit function 2012-11-09 16:42:10 +01:00
Eelco Dolstra
4c34d384e6 If hashes do not match, print them in base-32 for SHA-1/SHA-256
Fixes #57.
2012-10-23 18:05:50 +02:00
Eelco Dolstra
ad328bea15 XML writer: flush after newlines
This is useful for hydra-eval-jobs.
2012-10-04 14:07:36 -04:00
Eelco Dolstra
e666e1156f Handle octal escapes in /proc/self/mountinfo 2012-09-28 21:39:30 -04:00
Eelco Dolstra
b9c2b4d5b4 Remove setting of the immutable bit
Using the immutable bit is problematic, especially in conjunction with
store optimisation.  For instance, if the garbage collector deletes a
file, it has to clear its immutable bit, but if the file has
additional hard links, we can't set the bit afterwards because we
don't know the remaining paths.

So now that we support having the entire Nix store as a read-only
mount, we may as well drop the immutable bit.  Unfortunately, we have
to keep the code to clear the immutable bit for backwards
compatibility.
2012-09-19 16:17:54 -04:00
Eelco Dolstra
76e88871b2 Templatise tokenizeString() 2012-09-19 15:43:23 -04:00
Eelco Dolstra
295027f533 Include config.h before any other header
"config.h" must be included first, because otherwise the compiler
might not see the right value of _FILE_OFFSET_BITS.  We've had this
before; see 705868a8a9.  In this case,
GCC would compute a different address for ‘settings.useSubstitutes’ in
misc.cc because of the off_t in ‘settings’.

Reverts 3854fc9b42.

http://hydra.nixos.org/build/3016700
2012-09-11 14:45:42 -04:00
Eelco Dolstra
e94806d030 Merge branch 'master' into no-manifests 2012-08-27 11:09:07 -04:00
Eelco Dolstra
56e30e161c In the chroot, make all mounted filesystems private
This is required on systemd, which mounts filesystems as "shared"
subtrees.  Changes to shared trees in a private mount namespace are
propagated to the outside world, which is bad.
2012-08-20 15:27:30 -04:00
Eelco Dolstra
e82767910c Add some basic profiling support to the evaluator
Setting the environment variable NIX_COUNT_CALLS to 1 enables some
basic profiling in the evaluator.  It will count calls to functions
and primops as well as evaluations of attributes.

For example, to see where evaluation of a NixOS configuration spends
its time:

$ NIX_SHOW_STATS=1 NIX_COUNT_CALLS=1 ./src/nix-instantiate/nix-instantiate '<nixos>' -A system --readonly-mode
...
calls to 39 primops:
    239532 head
    233962 tail
    191252 hasAttr
...
calls to 1595 functions:
    224157 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:19'
    221767 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:14'
    221767 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:10'
...
evaluations of 7088 attributes:
    167377 undefined position
    132459 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/attrsets.nix:119:41'
     47322 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/attrsets.nix:13:21'
...
2012-08-12 23:29:28 -04:00
Eelco Dolstra
01d56c1eec Drop the block count in the garbage collector 2012-08-01 22:34:46 -04:00
Eelco Dolstra
79bba3782c Doh 2012-08-01 17:21:47 -04:00
Eelco Dolstra
c770a2422a Report substituter errors to clients of the Nix daemon 2012-08-01 11:19:24 -04:00
Eelco Dolstra
3a4623afbb Set permissions on temporary build directories to 0700
Fixes #39.
2012-07-26 15:04:40 -04:00
Eelco Dolstra
b7fd2c2822 Use "#pragma once" to prevent repeated header file inclusion 2012-07-18 14:59:03 -04:00
Eelco Dolstra
1db38ae81b When using chroots, use a private PID namespace
In a private PID namespace, processes have PIDs that are separate from
the rest of the system.  The initial child gets PID 1.  Processes in
the chroot cannot see processes outside of the chroot.  This improves
isolation between builds.  However, processes on the outside can see
processes in the chroot and send signals to them (if they have
appropriate rights).

Since the builder gets PID 1, it serves as the reaper for zombies in
the chroot.  This might turn out to be a problem.  In that case we'll
need to have a small PID 1 process that sits in a loop calling wait().
2012-06-25 15:45:16 -04:00
Eelco Dolstra
b006a31d52 Drop the externals directory
Nix now requires SQLite and bzip2 to be pre-installed.  SQLite is
detected using pkg-config.  We required DBD::SQLite anyway, so
depending on SQLite is not a big problem.

The --with-bzip2, --with-openssl and --with-sqlite flags are gone.
2012-03-18 23:54:57 +01:00
Eelco Dolstra
35355fc1fc Set the close-on-exec flag on file descriptors 2012-03-05 20:29:00 +01:00
Eelco Dolstra
bd013b6f98 On Linux, make the Nix store really read-only by using the immutable bit
I was bitten one time too many by Python modifying the Nix store by
creating *.pyc files when run as root.  On Linux, we can prevent this
by setting the immutable bit on files and directories (as in ‘chattr
+i’).  This isn't supported by all filesystems, so it's not an error
if setting the bit fails.  The immutable bit is cleared by the garbage
collector before deleting a path.  The only tricky aspect is in
optimiseStore(), since it's forbidden to create hard links to an
immutable file.  Thus optimiseStore() temporarily clears the immutable
bit before creating the link.
2012-02-15 01:31:56 +01:00
Eelco Dolstra
d5a5a83ad4 Use data() instead of c_str() where appropriate 2012-02-09 18:27:45 +01:00
Eelco Dolstra
b33da599c5 * In the garbage collector, delete invalid paths before deleting
unreachable paths.  This matters when using --max-freed etc.:
  unreachable paths could become reachable again, so it's nicer to
  keep them if there is "real" garbage to be deleted.  Also, don't use
  readDirectory() but read the Nix store and delete invalid paths in
  parallel.  This reduces GC latency on very large Nix stores.
2011-12-22 15:55:53 +00:00
Eelco Dolstra
273b288a7e * importPath() -> importPaths(). Because of buffering of the input
stream it's now necessary for the daemon to process the entire
  sequence of exported paths, rather than letting the client do it.
2011-12-16 22:31:25 +00:00
Eelco Dolstra
8d3dfa2c17 * Avoid expensive conversions from char arrays to STL strings. 2011-12-16 21:29:46 +00:00
Eelco Dolstra
e0bd307802 * Make the import operation through the daemon much more efficient
(way fewer roundtrips) by allowing the client to send data in bigger
  chunks.
* Some refactoring.
2011-12-16 19:44:13 +00:00
Eelco Dolstra
78598d06f0 * Clean up exception handling. 2011-12-16 15:45:42 +00:00
Eelco Dolstra
5a1b9ed0aa * Refactoring: move sink/source buffering into separate classes.
* Buffer the HashSink.  This speeds up hashing a bit because it
  prevents lots of calls to the hash update functions (e.g. nix-hash
  went from 9.3s to 8.7s of user time on the closure of my
  /var/run/current-system).
2011-12-15 16:19:53 +00:00
Eelco Dolstra
a3e0656cbb * Buffer reads in FdSource. Together with write buffering, this
significantly cuts down the number of syscalls (e.g., for "nix-store
  -qR /var/run/current-system" via the daemon, it reduced the number
  of syscalls in the client from 29134 to 4766 and in the daemon from
  44266 to 20666).
2011-12-15 12:32:08 +00:00
Eelco Dolstra
3a48282b06 * Buffer writes in FdSink. This significantly reduces the number of
system calls / context switches when dumping a NAR and in the worker
  protocol.
2011-12-14 23:30:06 +00:00
Eelco Dolstra
49f59dceca * Move parseHash16or32 into libutil, and use in nix-hash. 2011-12-02 11:47:06 +00:00
Eelco Dolstra
543988572e * Sync with the trunk. 2011-02-09 12:25:53 +00:00
Ludovic Courtès
3854fc9b42 Remove useless <config.h> inclusion from public header. 2011-01-14 13:55:58 +00:00
Eelco Dolstra
d787285af9 * nix-instantiate: return exit status 100 to denote a permanent build
failure.  The build hook can use this to distinguish between
  transient and permanent failures on the remote side.
2010-12-13 16:53:23 +00:00
Eelco Dolstra
100becf8d1 * createDirs(path): if path already exists, make sure it's a
directory.
* Provide a C++ wrapper around lstat().
2010-12-13 13:32:58 +00:00
Eelco Dolstra
a3883cbd28 * Store the size of a store path in the database (to be precise, the
size of the NAR serialisation of the path, i.e., `nix-store --dump
  PATH').  This is useful for Hydra.
2010-11-16 17:11:46 +00:00
Eelco Dolstra
fb9368b5a0 * Sync with the trunk. 2010-11-16 12:49:47 +00:00
Eelco Dolstra
705868a8a9 * Make sure that config.h is included before the system headers,
because it defines _FILE_OFFSET_BITS.  Without this, on 
  OpenSolaris the system headers define it to be 32, and then 
  the 32-bit stat() ends up being called with a 64-bit "struct 
  stat", or vice versa.

  This also ensures that we get 64-bit file sizes everywhere.

* Remove the redundant call to stat() in parseExprFromFile().
  The file cannot be a symlink because that's the exit condition
  of the loop before.
2010-10-04 17:55:38 +00:00
Eelco Dolstra
71dfe4b90b * Sync with the trunk. 2010-10-04 11:44:47 +00:00
Eelco Dolstra
450837bcc8 * In printMsg(), ignore failing writes to stderr if we're in an
exception handler, otherwise throw an exception.  We need to ignore
  write errors in exception handlers to ensure that cleanup code runs
  to completion if the other side of stderr has been closed
  unexpectedly.
2010-10-04 11:23:07 +00:00
Eelco Dolstra
80e722278c * When using the build hook, distinguish between the stderr of the
hook script proper, and the stdout/stderr of the builder.  Only the
  latter should be saved in /nix/var/log/nix/drvs.
* Allow the verbosity to be set through an option.
* Added a flag --quiet to lower the verbosity level.
2010-08-30 14:53:03 +00:00
Eelco Dolstra
766f708418 * Experimental feature: allow a derivation to tell the build hook that
it requires a certain feature on the build machine, e.g.

    requiredSystemFeatures = [ "kvm" ];

  We need this in Hydra to make sure that builds that require KVM
  support are forwarded to machines that have KVM support.  Probably
  this should also be enforced for local builds.
2010-08-27 13:18:13 +00:00
Eelco Dolstra
587dc8aa00 * Sync with the trunk. 2010-08-04 17:48:29 +00:00
Peter Simons
bcec46057c src/libutil/util.cc: include <limit.h> to ensure that PATH_MAX is defined 2010-06-24 17:51:13 +00:00
Eelco Dolstra
aa45027818 * Sync with the trunk. 2010-05-12 22:13:09 +00:00
Eelco Dolstra
83dfa89870 * Sync with the trunk. 2010-05-07 14:46:47 +00:00
Eelco Dolstra
a0e3b84fac * Revert r15436. This was a workaround for a bug in btrfs which seems
to have been fixed now.
2010-05-04 12:42:58 +00:00
Eelco Dolstra
d66ea83a76 * Sync with the trunk. 2010-04-20 09:20:29 +00:00
Eelco Dolstra
efc7a579e8 * Don't use the ATerm library for parsing/printing .drv files. 2010-04-19 13:46:58 +00:00
Eelco Dolstra
816dd3f061 * Remove more obsolete code. 2010-04-14 12:49:05 +00:00
Eelco Dolstra
0d272fca79 * Remove some obsolete functions. 2010-04-12 23:31:47 +00:00
Ludovic Courtès
eb07a4f1ee Escape `>' signs in the XML output.
* src/libutil/xml-writer.cc (nix::XMLWriter::writeAttrs): Escape `>'.
2010-03-31 08:29:01 +00:00
Eelco Dolstra
e8f7978274 2010-03-23 19:19:52 +00:00
Eelco Dolstra
141294ff38 * Clean up error messages in killUser(). 2010-03-19 11:36:34 +00:00
Eelco Dolstra
4c356acd04 * In `nix-store --export', abort if the contents of a path has
changed.  This prevents corrupt paths from spreading to other
  machines.  Note that checking the hash is cheap because we're
  hashing anyway (because of the --sign feature).
2010-03-09 14:32:03 +00:00
Eelco Dolstra
fb6e223ddc * Synced with the trunk. 2010-03-04 12:15:00 +00:00
Eelco Dolstra
594eaddd11 * When using the included sqlite/aterm libraries, build with
--enable-shared.
* In libutil/libstore/libexpr etc., link against sqlite and aterm.
* Some more header file hygiene.
2010-03-02 15:58:13 +00:00
Eelco Dolstra
84a4dd5ff0 * Don't use fdatasync since it doesn't work on Snow Leopard.
* Don't refer to config.h in util.hh, because config.h is not
  installed (http://hydra.nixos.org/build/303053).
2010-02-24 15:46:06 +00:00
Eelco Dolstra
5954eadf67 * Remove the fdatasync check since it's no longer needed. 2010-02-24 12:16:50 +00:00
Ludovic Courtès
20186a4079 Don't rely on `PATH_MAX' on GNU. 2010-02-10 15:55:50 +00:00
Eelco Dolstra
4bbbe25802 * Remove most Cygwin-specific code. Cygwin 1.7 implements advisory
POSIX locks, and simulates Unix-style file deletion semantics
  sufficiently.  Note that this means that Nix won't work on Cygwin
  1.5 anymore.
2010-02-02 15:28:36 +00:00
Eelco Dolstra
2723d9b56e * If fdatasync() isn't available, use fsync(). 2010-02-02 11:57:49 +00:00
Eelco Dolstra
07ffdc2862 * Added an option "fsync-metadata" to fsync() changes to
/nix/var/nix/db.
* Removed the function writeStringToFile since it does (almost) the
  same thing as writeFile.
2010-01-29 12:22:58 +00:00
Eelco Dolstra
ef92a14bfe * Include config.h before the C library headers, because it defines
_FILE_OFFSET_BITS=64.  Without it, functions like stat() fail on
  large file sizes.  This happened with a Nix store on squashfs:

  $ nix-store --dump /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds > /dev/null
  error: getting attributes of path `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds': Value too large for defined data type

  $ stat /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds
  File: `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds'
  Size: 0               Blocks: 36028797018963968 IO Block: 1024   regular empty file

  (This is a bug in squashfs or mksquashfs, but it shouldn't cause Nix
  to fail.)
2009-12-17 14:12:44 +00:00
Eelco Dolstra
945d8218fb * Build correctly against newer ATerm releases. Fixes "error: 'union'
tag used in naming 'struct _ATerm'".
2009-12-16 15:29:50 +00:00
Eelco Dolstra
13618b191e * Grrr. 2009-11-24 13:28:46 +00:00
Eelco Dolstra
aa5a768720 * GCC 4.4 is stricter about the EOF macro
(http://hydra.nixos.org/build/156340).
2009-11-24 12:56:26 +00:00
Eelco Dolstra
9b8fda796b * Templatise getIntArg / string2Int. 2009-11-24 12:26:25 +00:00
Eelco Dolstra
8022015552 * In the garbage collector, don't count files with a link count > 1 in
the "bytes/blocks freed" statistics.
2009-11-24 10:51:52 +00:00
Eelco Dolstra
1a8f8fd86f * OpenSolaris compatibility. 2009-09-30 09:54:29 +00:00
Eelco Dolstra
f2c3fc5191 * Don't show trace information by default (`--show-trace' to enable).
NixOS evaluation errors in particular look intimidating and
  generally aren't very useful.  Ideally the builtins.throw messages
  should be self-contained.
2009-06-30 13:28:29 +00:00
Michael Raskin
098cb9d233 Add an ftruncate call paired with fallocate to play safe with some FSes (namely, BtrFS fallocate sets file size to allocated size, i.e. multiple of block size) 2009-05-04 08:10:24 +00:00
Eelco Dolstra
4e646b0ddb * Fix a few "comparison is always false/true due to limited range of
data type" warnings on 64-bit platforms.  The one in parser.y is
  likely to be a real bug.
2009-04-16 12:03:17 +00:00
Eelco Dolstra
3a2bbe7f8a * Simplify communication with the hook a bit (don't use file
descriptors 3/4, just use stdin/stderr).
2009-03-28 19:29:55 +00:00
Eelco Dolstra
77d272623f * NAR archives: handle files larger than 2^32 bytes. Previously it
would just silently store only (fileSize % 2^32) bytes.
* Use posix_fallocate if available when unpacking archives.
* Provide a better error message when trying to unpack something that
  isn't a NAR archive.
2009-03-22 17:36:43 +00:00