Instead of using sentinel values and an additional bool, this tracks
the identifier of a local as an enum that is either a statically known
name, or a phantom.
To make this work correctly some more locals related logic has been
encapsulated in the `scope` module, which is a good thing (that's the
goal).
Phantom values are now not initialised by default, but the only
current call site of phantoms (`with` expression compilation) performs
the initialisation right away.
This commit changes no actual functionality right now, but paves the
way for fixing an issue related to `let` bodies.
Change-Id: I679f93a59a4daeacfe40f4012263cfb7bc05034e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6421
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The slot is now always known (at the root of the file it is simply
stack slot 0 once the scope drops back down to 0), so it does not need
to be wrapped in an `Option` and accessed in cumbersome ways anymore.
Change-Id: I46bf67a4cf5cb96e4874dffd0e3fb07c551d44f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6420
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change the runtime trace contains much more exact
information about the context of the computation (entering/exiting
calls etc.)
This is in large part due to moving the tracer to be a field on the VM
itself, which enables consistent ordering of traces across the
execution, and tracing an execution with its *input* instead
of *output* stack.
Change-Id: Ibe525e6e7d869756501e52bef1a441619ce7332c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6419
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it much easier to figure out what happened while debugging
this sort of thing.
Change-Id: I2e0e8096709adc647d63c04f213c547c415e5f44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6418
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This could occur when the disassembler is enabled and tracing the
runtime while a thunk is being evaluated, as it would not be possible
for the *tracer* to borrow the thunk at this exact moment.
However, we know that if the borrowing fails here we are dealing with
a not-fully evaluated thunk (blackhole), which should just print the
internal representation.
Change-Id: I4bdb4f17818d55795368e3d28842048f488f0a91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6416
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, "calling" (setting up the VM run loop for executing a call
frame) and "running" (running this loop to completion) were separate
operations.
This was basically an attempt to avoid nesting `VM::run` invocations.
However, doing things this way introduced some tricky bugs for exiting
out of the call frames of thunks vs. builtins & closures.
For now, we unify the two operations and always return the value to
the caller directly. For now this makes calls a little less effective,
but it gives us a chance to nail down some other strange behaviours
and then re-optimise this afterwards.
To make sure we tackle this again further down I've added it to the
list of known possible optimisations.
Change-Id: I96828ab6a628136e0bac1bf03555faa4e6b74ece
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6415
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If the disassembler feature is enabled, make sure that an Rc of the
codemap is available through the chunk.
Change-Id: I700f27ab665a704f73457b19bd2d7efc93828a16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6414
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The casting methods of `Value` are pretty verbose, and actually
incorrect before this commit as they did not account for inner thunk
values.
To address this, we first attempt to make them correct by introducing
a standard macro to generate them and traverse the inner thunk(s) if
necessary.
This is likely to be a performance hit as it will now involve more
cloning of values. We can do multiple things to alleviate this, but
should do some measurements first.
Change-Id: If315d6e2afe7b69db727df535bc6cbfb89a691aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6412
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it possible for builtins to force values on their own,
without the VM having to apply a strictness mask to the arguments
first.
Change-Id: Ib49a94e56ca2a8d515c39647381ab55a727766e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6411
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Scope poisoning must be inherited across lambda context boundaries,
e.g. if an outer scope has a poisoned `null`, any lambdas defined on
the same level must reference that poisoned identifier correctly.
Change-Id: I1aac64e1c048a6f3bacadb6d78ed295fa439e8b4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6410
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this, if an error occurs while forcing a thunk (which is very
likely) it is threaded through to the top by wrapping it in the
ErrorKind::ThunkForce variant.
We could use this to generate "stacktrace-like" error output if we
wanted, or simply jump through and discard everything except the
innermost error.
Change-Id: I3c1c8708c2f73ae062815adf490ce935b1979da8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6409
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously error spans were optional because the information about
code spans was not available at runtime. Now that this information has
been added, the error type will always carry a span.
This change is very invasive all throughout the codebase. This is due
to the fact that many functions that are called *by* the VM expected
to return `EvalResult`, but this no longer works as the span
information is not available to those functions - only to the VM
itself.
To work around this the majority of these functions have been changed
to return `Result<T, ErrorKind>` instead and an accompanying macro in
the VM constructs the "real" error.
Note that this implementatino currently has a bug where errors
occuring within thunks will yield the location at which the thunk was
forced, not the location at which the error occured within the code.
This will be fixed soon, but the commit is large enough as is.
Change-Id: Ib1ecb81a4d09d464a95ea7ea9e589f3bd08d5202
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6408
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Get the length of a list
Change-Id: I41d91e96d833269541a1b3c23b7cc879f96d1e5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6407
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
First pass at supporting `builtins` for tvix. The following tests appear to be
WAI:
```shell
$ cd tvix/eval
$ cargo build
$ cargo test
```
Change-Id: I27cce23d503b17a886d1109e285e8b4be4264977
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6405
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Another step towards being able to report accurate errors. The codemap
spans contain strictly more accessible information, as they now retain
information about which input file something came from.
This required some shuffling around in the compiler to thread all the
right information to the right places.
Change-Id: I18ccfb20f07b0c33e1c4f51ca00cd09f7b2d19c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6404
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As of this commit, the source spans of all emitted bytecode are fully
tracked.
Change-Id: I4c83deee0fc3f5e6fd6acad5a39047aec693b388
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6403
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These source spans will always point to the *value* that is being
forced, not the instruction that caused the force to be emitted. This
makes sense so that errors during forcing point at the value and not
the surrounding expression.
Change-Id: I4694414a3281a0de878f71634105b92148ec61f6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6402
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, the upvalue data instructions used by finalisers for
thunks and closures track the source span of the first identifier that
created the upvalue (if the same value is closed over multiple times
the upvalue will be reused, hence only the first one).
To do this the upvalue struct used by the compiler's scope now carries
an identifier node, which had to be threaded through quite a few
places.
Change-Id: I15a5fcb4c8abbd48544a2325f297a5ad14ec06ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6400
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This separation makes it possible to annotate the upvalue itself with
the span that created it, which (due to upvalue reuse) is only the
first one for an instance of the given UpvalueKind.
Change-Id: I9a991da6a3e8d71a92f981314bed900bcf434d44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6399
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are again a bit tricky in terms of emitted errors. The main
error is that the condition is not a boolean, which means that the
jump inspecting the condition must derive from the condition itself to
return an error at the correct position.
For other parts of the expression, it is simply the node itself.
Change-Id: I72411630e5d57dfc199f4c3c48afe443fe966322
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6392
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This one is tricky, specifically the span used for the final jump. I
decided that it makes sense to use the attrpath node, as the final
jump is the one that jumps *over* the default value, so the effect of
this is more closely related to the selector than the default.
It might be more correct to pass through the `or` token itself and
point to this for the jumps, but it depends a bit on what shape of
errors we could end up producing from this.
Change-Id: I29fbc97ba6b9e14e1a0e5f3a7759ddc299dd9c0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6390
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These are not actually used yet; this is in preparation for a
multi-commit chain for emitting all the right spans in the right
locations.
Change-Id: Ie99d6add2696c1cc0acb9ab928917a10237159de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6379
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This instantiates a codemap outside of the compiler and passes a
reference to the file currently under compilation to it. Note that the
"file" might just be a REPL line.
Change-Id: I131ae1ddb6d718e1374750da9ba0b99608c6058d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6378
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is currently just a wrapper around Chunk::push_op, but will gain
the span resolution logic in a moment.
Change-Id: I862bf9ecff0932f8da6708401ea044b9442c5d5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6377
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This adds a new vector to the chunk data structure which tracks spans
into a codemap. The compiler will emit this information to the chunk
when adding instructions.
The internal representation of the spans is slightly optimised to
avoid storing duplicate spans, as there are cases where many
instructions might be derived from the same span.
Change-Id: I336f8c912e7eb50ea02ed71e6164f651ca3ca790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6376
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Note that I've allowed `needless_lifetimes` for the attribute set
iterator, as I find the type easier to understand with these
annotations present.
Change-Id: I33abb17837ee4813076cdb9a87f54bac4a37044e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6373
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This essentially makes the VM behave like `nix-instantiate --eval
--strict`, i.e. data structures are traversed strictly and thunks are
forced. Thunks embedded in closures are not forced.
This allows us to re-enable tests that were disabled because they
needed to output nested thunk contents, but is overall a behaviour
that must be configurable later on, as it is not cmopatible with e.g.
an evaluation of nixpkgs.
Change-Id: I5303a5c8e4322feab1384fdb7712fecb950afca5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6372
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This does not require a custom iterator type (for now?)
Change-Id: I5beb194bd8629571bd4040c69c977c27149807fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6371
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If a thunk is already evaluated, there are cases where due to the
memoisation implementation something might observe a value wrapped in
a thunk.
In these cases, the implementation of `Display` and `PartialEq` must
delegate to the underlying value.
Note that there are a handful of other cases like these which we need
to cover.
It is a little tricky to write integration tests for these directly,
especially as some of the open-upvalue optimisations coming down the
pipe will reduce the number of observable thunks.
One test that covers a part of this behaviour is currently
disabled (needs some more machinery), but it's being brought back in
the next commits.
Change-Id: Iaa8cd338c12236af844bbc99d8cec2205f0d0095
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6370
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Implementing iteration over NixAttrs requires a custom iterator type
in order to encapsulate the different representations. The BTreeMap
for example has its own iterator type which needs to be encapsulated.
This is mostly boilerplate code, but for a change some simple unit
tests have been added in.
Change-Id: Ie13b063241d461b810876f95f53878388e918ef2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6367
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
