I'm working off of my laptop but I'm using my 4k monitor. The expression that
sets `fonts/size` could be more sophisticated and detect this, but for now, I'm
just bumping up the size.
When I first switched to EXWM, I wrote a lot of Elisp. I think I was mostly
excited about having a monorepo and, as I had a backlog of ideas that I wanted
to implement, I ended up writing many halfly baked ideas in Elisp. These are
mostly sketches.
Problem:
prettier-js waits for rjsx-mode. rjsx-mode only runs on .js files. As such,
the hook that installs prettier-js-mode for *all* of my frontend hooks, which
includes more than just js files, does not install until a javascript file is
opened.
Solution:
Do not conditionally load prettier-js.
Bonus:
Remove the .js mode from rjsx.
I think I removed the `(server-start)` call when I was debugging some EXWM
issues. I have stabilized my configuration considerably since then, and I'd like
to use the Emacs server.
I'm currently setting NIX_PATH in ~/briefcase/shell.nix. This means when I call
`nix/rebuild-emacs` from a buffer that is inside the briefcase directory, the
command succeeds because NIX_PATH is properly defined. When I call
`nix/rebuild-emacs` from any other location it fails.
I'm hard-coding the NIX_PATH in this command so that I can call
`nix/rebuild-emacs` from any buffer that is currently active.
Support commonly used programs like fd, exa, bat, etc.
For now, I'm unsure how to manage the programs in my emacs/default.nix with my
home.nix. I'll wait until I have a stronger opinion to handle this.
I'm not sure if this commit breaks everything in my monorepo. I think it
will.
Why am I doing this? Perhaps it's a bad idea. I don't fully understand how
readTree works. My ignorance is costing me hours of time spent debugging. In an
effort to better understand readTree, I'm removing the default values for my Nix
expression parameters, which I believe have preventing errors from surfacing.
- Support command to open a dired buffer with wpcarro's $HOME directory for any
host defined in ssh/hosts.
- Support opening the current buffer with sudo privileges.
Every Tuesday I work from Google's 6PS office instead of BEL. I work from my
laptop, which often requires that I ssh into the desktop work station in BEL. I
have settled on a locally optimal workflow that I'd like to improve. To help
seek higher ground, I'm planning on using ssh.el to configure tramp and define
utility functions to lower my cost of exploring new workflows.
- Defines a function, `ssh/desktop-cd-home` that helps me quickly open a dired
buffer for my work station's home directory.
- Documents some variables that I set weeks ago.
- Requires ssh.el in init.el.
Until now my notmuch is usable but not almost always pleasurably so. For
example, when I reply to messages, notmuch warns that "Insert failed:"; when I
check Gmail, the reply sent... strange. After consulting with a fellow notmuch
user and Emacs disciple, tazjin@, I borrowed some of his notmuch configuration.
- notmuch is no longer warning about replies
- Replies do not include noisy email signatures
- I have an Emacs User-Agent header in my outgoing mail
- All of this and more...
Add tag:unread to:
- direct
- broadcast
- systems
Additionally: I added "and not tag:sent" for direct because oftentimes I send
myself mail. Without that condition, my sent mail shows up in direct.
keybindings.el calls (require 'evil-ex), which I introduced in this commit...
0456a1c4b4
...calling (require 'evil-ex) loads evil. When evil is loaded before
evil-want-integration is set to nil, evil-collection writes to *Warnings* when
Emacs initializes, which I find noisy. This commit ensures the
evil-want-integration is set to nil before evil is loaded, which appeases
evil-collection and thus removes the warning message.
Bonus:
If you git checkout the previous commit, and attempt to run the KBDs...
- `SPC g s`: magit-status
- `s h`: evil-window-vsplit
...from a buffer whose major-mode is dired-mode, you should notice that the
above functions won't execute.
Strangely though, if you look at this commit...
37f8ca04f2
...I fixed these issues. Well I introduced a regression when I added 0456a1c.
My current guess is that when evil-collection complains about
evil-want-integration, it is breaking the evaluation sequence of my init.el
file. wpc-dired.el is downstream from wpc-keybindings.el, which requires
evil-collection. Perhaps no modules required after wpc-keybindings.el are
evaluated after evil-collection warns about evil-want-integration. Even if that
assumption is wrong, what I do know is that this commit fixes the
evil-collection warning and restores the KBDs for dired-mode-map.
Here's to feeding two birds with one scone!
Today I setup declarative gmail filters using some Google internal tooling. I'm
now adding labels to messages from Critique, Sphinx, Ganpati, "The Daily
Insider", messages sent directly to me, and more. These labels are applied
server-side.
On the notmuch, client-side, I'm support saved queries for these newly created
gmail labels.
I can already tag emails with `+` and `-`. Here I'm defining KBDs for moving
messages from my inbox into: action, review, and waiting. I'm also mutually
excluding messages in action, review, and waiting from inbox and vice versa.
I'm also supporting a "muted" tag for now; I'm still learning how to use notmuch
with email threads, but I'm hoping the "muted" tag will prevent future messages
in a thread from arriving in my inbox.
Until I have more opinions about my workflow with notmuch, I will redefine the
KBDs from Gmail that I'm comfortable with. While not many KBDs are defined here,
evil-collection defines dozens, many of which I find reasonable; those that I
disagree with, I've unbound in this commit.
Composing emails in notmuch feels similar to writing a commit message with
magit. I want to be able to type :x or :wq, but these commands don't DWIM. For
magit, I'd like that behavior to be the same as `C-c C-c`; not surprisingly, for
notmuch, I'd like the same.
I've bound :x to do this for notmuch. I'd like to define a macro that can easily
define buffer-local evil-ex commands for particular modes. This should lower the
cost of defining evil-ex commands and hopefully convince me to support some of
this desired behavior.
Today when I opened my laptop, I wasn't sure if it was powered off or on because
the display was blank. Thankfully the volume was muted and the LED indicator was
on, which informed me that the laptop was powered on. This saved me from
unnecessarily rebooting.
What happened was that last night I was working from home and using my external
monitor. Usually I enable my external display and disable my laptop display. But
when I left for work this morning, I unplugged the HDMI cable from my laptop
without disabling the external display or enabling the laptop display.
I noticed a XF86 button on my laptop entitled XF86Display. I figured that this
could be a nice place to bind a key to toggle my laptop display on or off. At
the last minute, I had the idea to just cycle through all possible display
configurations that I use; there are only three anyways. When dealing with more
than two states, I realized I should use a cycle to model the configuration
states. Now I'm thinking that I should be using cycles to model toggles as well
- instead of just using a top-level variable that I `setq` over. I haven't
refactored existing toggles to be cycles, but I am excited about this new
keybinding.
This commit additionally:
- Moves keybindings out of display.el and into keybindings.el
- Conditionally sets KBDs if using work laptop
Without these KBDs, C-k kills buffers. As an evil-mode user, I expect C-k to
move upwards. As such, adding the `ivy-switch-buffer-map` to my existing ivy
KBDs that handle a similar use-case.
Note: I'm unsure why the KBDs in evil-collection didn't cover this.
I enjoyed using term-switcher so much that I ended up adopting vterm as my
primary terminal. After reaching for vterm as often as I did, I realized that I
would enjoy supporting cycling through instances, creating new instances,
deleting existing instances, renaming instances. Thus spawned vterm-mgt.el.
I'm particularly excited about the KBD to toggle between vterm instances and
source code buffers.
Supporting these functions was a little tricky. For example, how should we
handle calling cycle/remove on the item that is currently focused? After
attempting to be clever, I decided to just set the value to nil and let the
consumer decide what is best for them. I can always support a more opinionated
version that fallsback to previous-index if previous-index is set. But until I
have a better idea of how I'm going to consume this, I think nil is the best
option.
Add predicate for determining if a cycle contains items.
Updated cycle/{new,from-list} to support setting current-index to nil when a
consumer calls it with an empty list.
I removed most of the packages that I install with `nix-env`. You can view these
with `nix-env --query`. This is one small step in a grander project to migrate
entirely to a declarative config managed by Nix.
I'm in the midst of transitioning onto a few new tools.
My previous workflow just used `nix-env` to install *some* packages. I didn't
have a prescribed methodology for which packages I would install using `nix-env`
and which ones I would install using `sudo apt-get install`. Sometimes if a
package would be available in my aptitude repositories, I'd use that; other
times when it wasn't available I'd use `nix-env`. One complication about being
on gLinux intead of NixOS is that some packages (e.g. nixpkgs.terminator) is
available via `nix-env -iA nixpkgs.terminator`, but the installation won't
actually run on my gLinux. In these instances, I would install terminator from
the aptitude repositories.
Then @tazjin introduced me to his Emacs configuration that he builds using
Nix. What appealed to me about his built Emacs is that it worked as expected on
either a NixOS machine and on gLinux (and presumably on other non-NixOS machines
as well).
A setup towards which I'm working is to own one or a few NixOS machines whose
configurations are entirely managed with Nix. On devices like my work machines,
which cannot run NixOS, I can build as much of the software that I need using
Nix and attempt to minimize the ad hoc configuration either with shell scripts,
python, golang, or more Nix code... it's clear that I still don't have a clear
idea of how that part will work.
For now, I'm adopting nix, nix-env, lorri, direnv, and weening off of aptitude
as much as I can. Things are a bit messy, but my general trend feels
positive. Stay tuned for more updates.
- Prefer goimports to gofmt. goimports calls gofmt; it also adds and removes
dependencies.
- Assert the presence of goimports, godoc, godef
- KBD godef to M-.
- Support the M-x compile command for calling `go build -v`
I mistakenly mapped one of my dual-function keys on my Ergodox to send Shift+CMD
instead of CMD. When some of my Emacs keybindings weren't firing, I noticed that
the key event they received was some like `C-S-s-<char>` instead of say
`C-s-<char>`. As a quick fix, I duplicated each of my keybindings that relied on
the CMD key to support Shift+CMD as well until I remapped the key on my
Ergodox. This morning, I remapped the Shift+CMD key to CMD, so I'm bidding adieu
to this code.
Press `<M-escape.` to display a list of buffers hosting X applications. Use
`completing-read` to select and focus one of these.
See the function docs and TODOs for more information.
