`our-crates` can just check if the attributes in question are
derivation (i. e. have an `outPath`) instead of blacklisting the
`__readTree` attribute specifically.
Change-Id: I472692e89c0e9eff551372c72a73ab765b0b6599
This makes it possible for users of cheddar as a library to supply
their own shortlinks. In practice it is unlikely anyone will do this,
but the change also allows us to (relatively) easily add additional
shortlinks to the set used by TVL.
Note that Cheddar is primarily intended for use by TVL and the default
rendering function interfaces have not changed, and will default to
using TVL shortlinks.
A new public function `format_markdown_with_shortlinks` has been added
with which users can use an alternative set of shortlinks. This
function should not be used in TVL depot code.
Change-Id: I4ddab28cbcf45d07c51323b7b730b96e62922816
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3083
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
This is required by common patterns in shell scripts.
There are some caveats around this. Adding logic to filter whether
coreutils is included in an image would slow down the Nix evaluation,
so the link is currently created even in cases where it doesn't point
to anything.
Fixes#109
This fixes all compilation warnings except the one about 'tvl lacking
a parent group, which we can look into later (it doesn't matter that much).
Change-Id: Iaff5e7f5f251f0670afb0a47031ccf197de69818
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3408
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
I'm using gerrit at work now, and would like to use tvl.el to interact
with it via Emacs, but we use a different default branch than "canon".
This makes it configurable, and also marks it as safe so I can configure
it in .dir-locals.el
Change-Id: I66d4c7ce94351f2df863ec49dbc3e1d1d6d1547a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3369
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Very simplistic tool to aid with updating our nixpkgs channel pins:
This tool prints the correct two `*Hashes` sets to stdout, so you can
easily delete the appropriate lines in `third_party/nixpkgs/default.nix`,
run
./bin/depot-nixpkgs-update | wl-copy
and paste it into your editor.
Doing this fully automatically would be possible, but would either
a) require changing `default.nix`, so it is regex-able more easily,
b) touching something like rnix-parser which I have no motivation to
at the moment or
c) searching for the old hashes and replacing them with the new
ones. This may be a simple and worthwhile improvement in the future.
Change-Id: I4df44e3827ce9ff6e4fe2d336c08016d799e21a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3252
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
After the discussion in #116, this stores the blob content types
in extended attributes when using the filesystem backend.
If the underlying filesystem doesn't support extended attributes,
storing blobs won't work; also, if extended attributes get removed,
blobs won't be served anymore. We can relax this behavior if
needed (i.e. log errors but still accept to store or serve blobs).
However, since the Docker Engine (and possibly other container
engines) won't accept to pull images from a registry that doesn't
use correct content types for manifest files, it could be argued
that it's better to give a hard fail. (Otherwise, the container
engine gives cryptic error messages like "missing signature key".)
I can change that behavior (and log errors but still store/serve
blobs to the filesystem) if you think it's better.
With https://github.com/google/nixery/pull/127, nixery will use extended
attributes to store metadata (when using local storage).
Right now, our integration test mounts a tmpfs to /var/cache/nixery.
However, *user* xattrs aren't supported with tmpfs [1], so setting
xattrs would fail.
To workaround this, use a folder in the current working directory and
hope it's backed by something supporting user xattrs (which is the case
for GitHub Actions).
[1]: https://man7.org/linux/man-pages/man5/tmpfs.5.html#NOTES
* users/grfn/system/home/yeren: remove obsolete awscli2 overrides
* ops: make new isSystemUser || isNormalUser assertion happy
* users/grfn/system/system/mugwump: make buildkite agents system users
* users/tazjin/nixos/camden: set isSystemUser = true for git
* users/tazjin/emacs: Remove missing & broken packages
* third_party/openldap: remove, as the argon2 module is now enabled upstream
* third_party/gerrit_plugins: Pinned new unstable hashes
* third_party/nix, third_party/grpc: Disabled CI as these are broken
* third_party/overlays/emacs: Bumped version to stay in sync with channel
* third_party/buzz: Update LIBCLANG_PATH to reference libclang.lib,
since libclang's default output no longer contains libclang.so
* users/grfn/system/home: Install julia-stable instead of julia (which
aliases to julia-lts), as the latter depends on an insecure version of
libgit
Change-Id: Iff33b0ecb0ef07a82d1de35e23c40d2f4bf0f8ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3001
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
* This was mostly for //third_party/nix and its dependencies which now
have been set to use llvmPackages_11 manually.
* For //users/grfn/achilles we also manually select the newer LLVM version.
* //tools/cheddar doesn't seem to need llvm anymore.
* //third_party/buzz also compiles with clang 7.1.0
* replace clang-tools everywhere with new attribute clang-tools_11
For the future we may want to have something similar again, but it may
not be necessary to invest too much time into it: nixpkgs is set to
upgrade their default llvmPackages to LLVM 11 as well at some point in
the near future.
Co-Authored-By: sterni <sternenseemann@systemli.org>
Change-Id: Id83868dbc476a6c776b59518b856c933f30ea79d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3135
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
This is fixed in upstream nixpkgs, but we're not yet at a commit where
it's used, so it's important to use the OpenLDAP from //third_party
Change-Id: I7c033cd23f45a95c4a4af864ffe561c496833a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3143
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We have a bunch of crates in `third_party/rust-crates`; it would be
great if we could check them for existing CVEs.
This tool does that, it takes the rust security advisory database,
parses the applicable CVEs, and cross-checks them against the actual
crate versions we list in our package database.
The dumb parser we wrote is tested against all entries in the
database, so we will notice when upstream breaks their shit.
Checking the semver stuff is easy enough with the semver crate.
If an advisory matches, it prints the whole thing and fails the build.
Change-Id: I9e912c43d37a685d9d7a4424defc467a171ea3c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2818
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Implements highlighting of shortlinks like cl/123, or b/123.
Highlighting works by replacing the input Markdown using a simple
regular expression replacement.
We also considered parsing and replacing these links in the Markdown
AST, but it would have been significantly more complex (due to arena
allocation) for little upside and no obvious performance benefit.
Change-Id: I53f03fb17491046d89d0b7f605929571c11ee9a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3082
Tested-by: BuildkiteCI
Reviewed-by: eta <eta@theta.eu.org>
The BAT_SYNTAXES environment variable is injected during Nix builds
and points to the build result of //third_party/bat_syntaxes, which is
included in the cheddar binary.
During development this is a bit annoying: Opening a Nix shell will
set the right variable, but it will also mess with the Cargo
environment in ways that make it annoying to use (*and* require a
pre-build of all dependencies as required by naersk).
For an easier development flow, this adds a build script that
automatically runs Nix, fetches the path to the syntax set and sets
the environment variable. It is a no-op if the variable is already
set.
This makes for a smoother development experience when working on
cheddar in a depot checkout.
Change-Id: Ib5435518897e3443247edd9f362821c0b9ff756b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3081
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Splits `main.rs` into `lib.rs` and `bin/cheddar.rs`, which enables
reuse of cheddar's rendering logic in other Rust applications.
Change-Id: Ifd1a44a8d1620c595550a0a497a25b0563e917ca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3060
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Drops the go2nix configuration in favour of pkgs.buildGoModule.
Note that the go.sum file is bloated by issues with cyclic
dependencies in some Google projects, but this large number of
dependencies is not actually built.
* remove a step that was not supposed to be committed ("Do we have
Docker?")
* remove setup of old temporary storage directory (now done in
integration script test instead)
* skip creation of out-link for initial Nixery build (to avoid
cache-busting on the second build)
In case the `GOOGLE_APPLICATION_CREDENTIALS` environment variable is not
set, a redirect to storage.googleapis.com is issued, which means the
underlying bucket objects need to be publicly accessible.
This wasn't really obvious until now, so further clarify it.
This copies the integration tests from `.travis.yaml` into a script,
documents the assumptions it makes, and wires it into GitHub Actions.
Contrary to the travis version, we don't use Nixery's GCS backend, as
handing out access to the bucket used, especially for PRs, needs to be
done carefully.
Adding back GCS to the integration test can be done at a later point,
either by using a mock server, or by only exposing the credentials for
master builds (and have the test script decide on whether
GOOGLE_APPLICATION_CREDENTIALS is set or not).
The previous travis version had some complicated post-mortem log
gathering - instead of doing this, we can just `docker run` nixery, but
fork it into the background with the shell - causing it to still be able
to log its output as it's running.
An additional `--rm` is appended, so the container gets cleaned up on
termination - this allows subsequent runs on non-CI infrastructure (like
developer laptops), without having to manually clean up containers.
Fixes#119.
We don't intend to label, authenticate or whatever with the
GITHUB_TOKEN, so there's not really a reason to give any broader
permissions than the defaults.
When serving a manifest, it is important to set the content-type
correctly (otherwise pulling an image is likely to give a cryptic
error message, "Error response from daemon: missing signature key").
This makes sure that we set the content-type properly for both
manifests and layers.
Adds a new internal builder that makes it possible to override the
`emacsPackages` passed to our Emacs packages, which in turn makes it
possible to inject them into the emacsPackages fixpoint and use them
with features like Emacs native compilation.
Change-Id: I80dad57115c83cf5693ae6ba4e4cf3105d103d5e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3003
Tested-by: BuildkiteCI
Reviewed-by: adisbladis <adisbladis@gmail.com>
Reviewed-by: grfn <grfn@gws.fyi>
Rename my //users directory and all places that refer to glittershark to
grfn, including nix references and documentation.
This may require some extra attention inside of gerrit's database after
it lands to allow me to actually push things.
Change-Id: I4728b7ec2c60024392c1c1fa6e0d4a59b3e266fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2933
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: glittershark <grfn@gws.fyi>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
Change-Id: I49d82726b2f3bd7d4923effdd9a7e3f67ddc0659
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2916
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
In preparation for the solution of b/108, we need to consistently use
`depot.third_party` for packages that are only packed in the TVL depot
and `pkgs` for things that come from nixpkgs.
This commit cleans up a huge chunk of these uses in //third_party
Change-Id: Ic382c0cdea7330a84d5f0b7d109c824ddceb94e7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2912
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This chops off "front matter", which we have - for example - in Tvix
documentation that is rendered through Pandoc.
Change-Id: I65c7a4ad8171423a50aaf47c046dab8c774346d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2717
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Covers some of the odd things we do, specifically callouts and code
rendering.
Change-Id: Ib8542373b434b53d277b0d8c9ddb78ac7c5176a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2689
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
I've been running a script similar to this after doing Gerrit version
bumps to make sure the schema is up to date, but in the spirit of making
sure someone other that myself can do this task I'm formalising it into
the depot, where I should've put it in the first place.
Change-Id: I50a198e798e2ff26989b01e4bdd0571d85ab62aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2203
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Extends storage.Persist to accept a Content-Type argument, which in
the GCS backend is persisted with the object to ensure that the object
is served back with this content-type.
This is not yet implemented for the filesystem backend, where the
parameter is simply ignored.
This should help in the case of clients which expect the returned
objects to have content-types set when, for example, fetching layers
by digest.
To ensure that registry clients which attempt to pull manifests by
their content hash can interact with Nixery, this change implements
persisting image manifests in the CAS in the same way as image layers.
In combination with the previous refactorings this means that Nixery's
serving flow is now compatible with containerd.
I have verified this locally, but CI currently only runs against
Docker and not containerd, which is something I plan to address in a
subsequent PR.
This fixes#102
Modifies the layer serving endpoint to be a generic blob-serving
endpoint that can handle both manifest and layer object "types".
Note that this commit does not yet populate the CAS with any
manifests.
It was only used for #'-each, for which the built-in dolist is sufficient.
Change-Id: I326d8b733b36b2edfebd4e9384e70b8a570fee0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1987
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Archiving notes is done by just changing the filename to an `archive-`
instead of `note-` prefix.
Unarchiving is not yet implemented and should be done by moving the
note to a *new note ID*.
Archiving is bound to 'a' in the note list.
Change-Id: I8c225a25bdac5147a26030f47f24edee497f69df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1986
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This mode displays the note's timestamp in its header line, and the
content in its body.
Some rudimentary key bindings are set up in the list view to view
notes in full (RET), and in both modes to quit the current buffer (q).
Change-Id: Icb35baec220a9efcfa2b86617b16178669df996f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1985
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Adds a very simple initial display of all notes in chronologically
descending order.
Currently this is a read-only view with no available actions.
Change-Id: I6d47363909f1a9ab8d1d18a1c44966883aa758ad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1983
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
I'm writing a note taking system because I don't like any of the
existing ones.
This adds a note-taking function which prompts the user for note
content and persists it in a user-configurable directory.
Next steps are roughly:
* listing notes
* editing notes
* archiving notes
At which point I would consider this functional. The idea is to keep
adding incremental improvements that fit my workflows after that, and
if it ends up being useful for anyone else - great.
Change-Id: I7ae0eb4015511ebdbaeff92d8d32502726eb57c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1981
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Since upgrading to Emacs 27 I have observed a strange behaviour where
this terminal switcher sometimes fails to select a valid buffer, in
which case it falls through to the case that just opens a new buffer
instead.
This is kind of annoying and to aid in debugging this change makes the
creation of new buffers explicit and fails if no matching buffer is
found.
Note that this is likely not a fix for the issue itself, but it will
help debug what is going on.
Change-Id: I906869aba7d25156aaf92c090b169ce02785b85e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1930
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
These projects, which are not currently included in CI runs, don't
build at the moment.
Upcoming logic changes would mean that we would start including them
in CI, which is undesirable until they're fixed - but I'm not going to
be doing that now.
Change-Id: I7c337e098be8bff00db6d99fc7236a695f5a85f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1850
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
This should actually just be an attribute set.
Change-Id: Idea1a9f7cfbb2eecd7e6342c6b5aeb66d3f3441a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1845
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
You can now provide a list of Nix derivations to tvlc to get a git worktree + sparse-checkout containing only the paths needed to build the specified derivations.
Known bugs: even though //third_party is only passed to readdir(), git doesn't know this and includes all of //third_party/*.
Change-Id: I9dccebd3fbff4bb04ebd568175cf0a7e37d71ab3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1826
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
depot-scanner is a tool that runs Nix and parses the --trace-file-access output to deduce what files are necessary to evaluate a derivation.
Take DEPOT_ROOT from the environment. If depotRoot doesn't exist, print an error early.
Fix the build of the protobuf library. Switch to the GRPC build rule, as a service is in this proto file.
Create the PathType enum and parse it from cmdline flags.
Change-Id: I537b5c6bceecf76ca510f7ac04ab9dad7785feb1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1769
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
tvlc is a tool for managing sparse git worktrees of the TVL depot.
It is still in development; near-term tasks include a setup script,
Nix dependency resolution, worktree removal, and the dispatch
script.
See cs.tvl.fyi/depot/docs/designs/SPARSE_CHECKOUTS.md for more info.
Change-Id: Iad96656f0206178980fe7dcadd3dffe70d690f8f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1760
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This gives better overall results and may also prevent drift, which
was an issue I've had previously.
See also this upstream commit for NSFV:
34003bd9ab
Change-Id: I45534cb60130755949cdbfbc39aed2478a249c72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1717
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Permission changes in the Travis CI Nix builders have caused this to
start failing, as the build user now has insufficient permissions to
use caches.
There may be a way to change the permissions instead, but in the
meantime we will just cause things to rebuild.
Channel serving has moved to a new subdomain, and the redirect
semantics have changed. Instead of serving temporary redirects,
permanent redirects are now issued.
I've reported this upstream as a bug, but this workaround will fix it
in the meantime.
This moves the pin from just being in the Travis configuration to also
being set in a nixpkgs-pin.nix file, which makes it trivial to build
at the right commit when performing local builds.
Similar to the source code highlighting endpoint, but for Markdown.
This is to be used by the bug tracker, as well as Sourcegraph in the
future.
Change-Id: I4bea5c46ba969ba9965b61409e1c19c2edf1246c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1424
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
This makes two main changes:
1) It disables profiling of things that aren't part of the invoked
process (-a). This isn't particularly useful in most cases because
it will show things like Chrome's VP9 decoding while you're
profiling something else.
2) It tells perf about the debug symbol format, which for some reason
isn't DWARF2 by default.
Change-Id: Ida6a54b74f1ec635fec930db7e2a2aa039dd1443
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1185
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
Add tools.perf-flamegraph, which collects the base case execution of
perf piped through stackcollapse-perf and flamegraph to flamegraph the
execution of an external command via perf.
Change-Id: I671fe254dc374b6cd7deca2d3bdea266164de025
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1176
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Now that we're requiring CI to verify all changes (yay) it's not
actually possible to push and submit in one go - this repurposes the
rubberstamp command to push and self-+2, which is still useful for
self-owned things like system config etc.
Change-Id: Ie064adb6b7b0c1fd6bffdf4583a201ea02d4f8ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/939
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This wrapper script correctly invokes slappasswd for generating ARGON2
hashes.
People without Nix will need to figure this out on their own.
Change-Id: I264715ba4932855b868bef70cc9102515b3d129e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/833
Tested-by: BuildkiteCI
Reviewed-by: BuildkiteCI
Reviewed-by: Kane York <rikingcoding@gmail.com>
This program can be used for noise-cancelling in arbitrary audio
streams. See CL/576 and CL/577 for more details.
This moves the script out of my users folder and to //tools, and adds
two changes:
* Existing sinks will be removed & reinitialised
* The sink is changed from stereo->mono (which seems to make little
difference but is more reliable)
* The parameter has changed from 50 to 42 because I felt like it
Change-Id: Id9ff285fefd682ccc4d9f18e46b5fde9cd056aa7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/578
Reviewed-by: glittershark <grfn@gws.fyi>
P W, to push as a work-in-progress CL
Change-Id: Ibc6973512e8dcd3ce77b2f1064906a98e9a3a182
Reviewed-on: https://cl.tvl.fyi/c/depot/+/575
Reviewed-by: tazjin <mail@tazj.in>
Sourcegraph uses a component called syntect_server to syntax-highlight
source files.
Since we already have custom syntaxes, overrides and configuration we
might as well use them with Sourcegraph!
This implements the syntect_server "protocol" (it's just a single
endpoint) so that we can swap out the syntect_server component with
cheddar.
Note: There's a few clippy lints here, but they're being solved in a
followup commit because I wanted to take care of all of them at
once (not just the ones introduced in this change).
Change-Id: Ib518a2fa1b9fee299fe599482403599583cac479
Reviewed-on: https://cl.tvl.fyi/c/depot/+/509
Reviewed-by: lukegb <lukegb@tvl.fyi>
This function opens the depot in magit. By default the depot path is
assumed to be `/depot`, but that is made available as a customise
option that users can override.
Change-Id: Iefc127cad515dbae330d7af3aa69a0c53aa02015
Reviewed-on: https://cl.tvl.fyi/c/depot/+/504
Reviewed-by: glittershark <grfn@gws.fyi>
Introduces two new shortcuts in the magit popup for pushing:
* R: Push for review
* S: Push to submit
The existing "P" command remains, but has been renamed to
"rubberstamp" and documented with a warning.
To make this work across people's different setups, customisation
options for TVL-specific code are being added.
Change-Id: I48e75db55b5f793342fc898093629e437f58dcb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/503
Reviewed-by: glittershark <grfn@gws.fyi>
Add a simple tvl.el, with only one magit transient command to push and
submit in one go to Gerrit
Change-Id: If02065797a8db39669b85acf87a1c4b43d1482ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/494
Reviewed-by: tazjin <mail@tazj.in>
This paves the way for using other things than stdin/stdout as
sources/sinks, which is required for example for implementing a
syntect_server replacement based on cheddar.
Change-Id: I5779db8dbf7b7ced109c26b940f721d237d60785
Reviewed-on: https://cl.tvl.fyi/c/depot/+/491
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
The complexity of the arg parsing is increasing somewhat because we're
adding more features to cheddar, so to set us up for that this
switches the arg parsing to the somewhat more flexible clap.
Change-Id: I187bc0c1b6c6bd596fa0f6bb494b04e335262ba9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/445
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <mail@tazj.in>
We can always revert this if we want it back.
Change-Id: I1332b6dd541199584b7b5b94a8651172d79e53a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/442
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
This was actually executing ssh, which was kinda silly - we really just
want to check the return code of the `which` invocation
Change-Id: I8a4b277a2be3b0c6a43d2da830cb82a32f9ee51e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/428
Reviewed-by: tazjin <mail@tazj.in>
Add a script to run gerrit commands on the depot host, which reads the
gerrit username from the TVL_USERNAME env var or $(whoami) by default.
At some point this may want to solve the configuration problem in a more
general fashion, but for now this seems relatively obvious.
Change-Id: Ied91c1d26daf4770aef74b2e755d1760c486bb7b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/396
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
Assuming you're in `/depot/fun/clbot`, you can do this:
tazjin@frog /d/f/clbot (master)> depot-build
Building //fun/clbot
/nix/store/i1zc6g58wa4819kyhaqi12zsh3hr31ph-clbot
It is automatically added to the $PATH using direnv, too.
Change-Id: Ia3341704e6317c2b8de40a3fa1be3b680d21a42d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/388
Reviewed-by: eta <eta@theta.eu.org>
Adds a mechanism for per-filename overrides of the chosen language
syntax and configures it for Gerrit's submit rule file.
This also switches the syntax set used to the one from
//third_party/bat_syntaxes, which contains custom additions such as
Prolog support.
Change-Id: I2023dbad5b326305ef2ef0ecf34ef66a3f7575ab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/349
Reviewed-by: riking <rikingcoding@gmail.com>
Reviewed-by: lukegb <lukegb@tvl.fyi>
This enables half of the shortcuts for switching keyboard languages
when EXWM launches.
The cyrillic ones are commented out because Emacs doesn't start
otherwise, I've no idea why and don't care at the moment.
These records have so many fields that it's difficult to track what's
what in a long list. For convenience they're now specified in plist
format (see the example).
There isn't really a point to this because the SOA record is the one I
care the *least* about practically as Cloud DNS sets it for me, but
whatever.
vauxhall (my laptop) now has an additional screen connected at home,
but sometimes I use that screen for my desktop computer (nugget).
This refactors the randr configuration for EXWM to support somewhat
more dynamic, multi-monitor layouts and adds key bindings to toggle
between some of the different configurations I want.
Modifies notmuch-show-open-or-close-subthread to take a parameter
instead of using prefix to toggle the argument, and binds that
function to C-, and C-. in notmuch-show-mode-map to enable convenient
collapsing/uncollapsing of subthreads from point.
Configures org-journal to store journal files on camden and encrypt
them to my GPG key.
Journal entries are weekly, with weeks starting Saturday (yes, there's
a reason for this).
This uses the built-in chart.el library to create a quick graph of the
number of unread emails in each notmuch tag. Some generic tags are
excluded from the overview.
Previously, this was failing as follows:
```
these derivations will be built:
/nix/store/7rbrf06phkiyz31dwpq88x920zjhnw0c-nixery-popcount.drv
building '/nix/store/7rbrf06phkiyz31dwpq88x920zjhnw0c-nixery-popcount.drv'...
building
warning: GOPATH set to GOROOT (/nix/store/4859cp1v7zqcqh43jkqsayl4wrz3g6hp-go-1.13.4/share/go) has no effect
failed to initialize build cache at /homeless-shelter/.cache/go-build: mkdir /homeless-shelter: permission denied
builder for '/nix/store/7rbrf06phkiyz31dwpq88x920zjhnw0c-nixery-popcount.drv' failed with exit code 1
error: build of '/nix/store/7rbrf06phkiyz31dwpq88x920zjhnw0c-nixery-popcount.drv' failed
```
Cheddar now needs to be passed the --about-filter flag to toggle the
behaviour for rendering Markdown into HTML.
By default Markdown will be highlighted like normal source code (i.e.
cgit source-filtering is the default behaviour).
This advice is potentially defined before the autoloads for telega
have run, which means that the macro-expansion fails and
`telega-ins-fmt` is looked up as a function.
With this setup the initialisation works as expected.
The lambda that acts as the sentinel for building SBCL with packages
needs to be able to capture variables if lexical binding is enabled,
which is made possible by the lexical-let form.
